Subversion Repositories openarty

################################################################################
##
## Filename:    Makefile
##
## Project:     OpenArty, an entirely open SoC based upon the Arty platform
##
## Purpose:     
## Targets:     
##
## Creator:     Dan Gisselquist, Ph.D.
##              Gisselquist Technology, LLC
##
################################################################################
##
## Copyright (C) 2015-2016, Gisselquist Technology, LLC
##
## This program is free software (firmware): you can redistribute it and/or
## modify it under the terms of  the GNU General Public License as published
## by the Free Software Foundation, either version 3 of the License, or (at
## your option) any later version.
##
## This program is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with this program.  (It's in the $(ROOT)/doc directory, run make with no
## target there if the PDF file isn't present.)  If not, see
## <http://www.gnu.org/licenses/> for a copy.
##
## License:     GPL, v3, as defined and found on www.gnu.org,
##              http://www.gnu.org/licenses/gpl.html
##
##
################################################################################
##
##
.PHONY: all
PROGRAMS := wbregs netuart wbsettime dumpflash wbprogram netsetup manping zipload zipstate zipdbg
SCOPES := eqspiscope etxscope erxscope cpuscope
all: $(PROGRAMS) $(SCOPES) gps
CXX := g++
OBJDIR := obj-pc
BUSOBJS := $(OBJDIR)/ttybus.o $(OBJDIR)/llcomms.o $(OBJDIR)/regdefs.o
SOURCES := wbregs.cpp wbprogram.cpp netuart.cpp wbsettime.cpp           \
        ttybus.cpp llcomms.cpp dumpflash.cpp eqspiscope.cpp flashdrvr.cpp \
        regdefs.cpp scopecls.cpp sdramscope.cpp ttybus.cpp              \
        cfgscope.cpp zipload.cpp zipstate.cpp zipdbg.cpp                \
        erxscope.cpp etxscope.cpp netsetup.cpp cpuscope.cpp             \
         mdioscope.cpp manping.cpp
        # ziprun.cpp
HEADERS := llcomms.h ttybus.h devbus.h
OBJECTS := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(SOURCES)))
ZIPD := ../../../../../zipcpu/trunk/sw/zasm

%.o: $(OBJDIR)/%.o
$(OBJDIR)/%.o: %.cpp
        $(CXX) -g -c $< -o $@

.PHONY: gps
gps: $(BUSOBJS) $(OBJDIR)/scopecls.o
        @bash -c "if [[ -e gps/Makefile ]]; then cd gps; make --no-print-directory; fi"

$(OBJDIR)/hsnetuart.o: netuart.cpp
        $(CXX) -g -c -DHIGH_SPEED $< -o $@

.PHONY: clean
clean:
        rm -rf $(OBJDIR)/*.o $(PROGRAMS)

$(OBJDIR)/scopecls.o: scopecls.cpp scopecls.h
$(OBJDIR)/eqspiscope.o: eqspiscope.cpp scopecls.h
$(OBJDIR)/dumpflash.o: dumpflash.cpp regdefs.h

netuart: $(OBJDIR)/netuart.o
        $(CXX) -g $^ -o $@
hsnetuart: $(OBJDIR)/hsnetuart.o
        $(CXX) -g $^ -o $@
#
# Some simple programs that just depend upon the ability to talk to the FPGA,
# and little more. 
wbsettime: $(OBJDIR)/wbsettime.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
mtest: $(OBJDIR)/mtest.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
manping: $(OBJDIR)/manping.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
wbregs: $(OBJDIR)/wbregs.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
zipstate: $(OBJDIR)/zipstate.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
netsetup: $(OBJDIR)/netsetup.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
dumpflash: $(OBJDIR)/dumpflash.o $(BUSOBJS)
        $(CXX) -g $^ -o $@

#
# Programs that depend upon not just the bus objects, but the flash driver
# as well.
wbprogram: $(OBJDIR)/wbprogram.o $(OBJDIR)/flashdrvr.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
zipload: $(OBJDIR)/zipload.o $(OBJDIR)/flashdrvr.o $(BUSOBJS)
        $(CXX) -g $^ -lelf -o $@


## SCOPES
# These depend upon the scopecls.o, the bus objects, as well as their
# main file(s).
eqspiscope: $(OBJDIR)/eqspiscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
sdramscope: $(OBJDIR)/sdramscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
cfgscope: $(OBJDIR)/cfgscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
cpuscope: $(OBJDIR)/cpuscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
erxscope: $(OBJDIR)/erxscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
etxscope: $(OBJDIR)/etxscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
mdioscope: $(OBJDIR)/mdioscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@
wbuscope: $(OBJDIR)/wbuscope.o $(OBJDIR)/scopecls.o $(BUSOBJS)
        $(CXX) -g $^ -o $@

#
# The ZipDebugger is a bit more difficult to build, as it wants to be able
# to disassemble opcodes given to it.  Hence, it depends upon the zparser.cpp,
# zopcodes.cpp, and twoc.cpp files from the ZipCPU build directory.
#
DBGRAW  := zparser.cpp zopcodes.cpp twoc.cpp
DBGSRCS := $(addprefix $(ZIPD)/,$(DBGRAW))
DBGOBJS := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(DBGRAW)))
$(OBJDIR)/zipdbg.o: zipdbg.cpp
        $(CXX) -g -I$(ZIPD) -c $< -o $@
$(OBJDIR)/zparser.o: $(ZIPD)/zparser.cpp
        $(CXX) -g -I$(ZIPD) -c $< -o $@
$(OBJDIR)/zopcodes.o: $(ZIPD)/zopcodes.cpp
        $(CXX) -g -I$(ZIPD) -c $< -o $@
$(OBJDIR)/twoc.o: $(ZIPD)/twoc.cpp
        $(CXX) -g -I$(ZIPD) -c $< -o $@
zipdbg: $(OBJDIR)/zipdbg.o $(BUSOBJS) $(DBGOBJS)
        $(CXX) -g -I$(ZIPD) $^ -lcurses -o $@

define  build-depends
        @echo "Building dependency file(s)"
        $(CXX) $(CPPFLAGS) -I$(ZIPD) -MM $(SOURCES) > $(OBJDIR)/xdepends.txt
        @sed -e 's/^.*.o: /$(OBJDIR)\/&/' < $(OBJDIR)/xdepends.txt > $(OBJDIR)/depends.txt
        @rm $(OBJDIR)/xdepends.txt
endef

tags: $(SOURCES) $(HEADERS)
        @echo "Generating tags"
        @ctags $(SOURCES) $(HEADERS)

.PHONY: depends
depends: tags
        $(build-depends)

$(OBJDIR)/depends.txt: $(OBJDIR)/ $(SOURCES) $(HEADERS)
        $(build-depends)

$(OBJDIR)/:
        @bash -c "if [ ! -e $(OBJDIR) ]; then mkdir -p $(OBJDIR)/; fi"

-include $(OBJDIR)/depends.txt