URL
https://opencores.org/ocsvn/openarty/openarty/trunk
Subversion Repositories openarty
[/] [openarty/] [trunk/] [sw/] [host/] [zprog.sh] - Rev 50
Go to most recent revision | Compare with Previous | Blame | View Log
#!/bin/bash ################################################################################ ## ## Filename: zprog.sh ## ## Project: OpenArty, an entirely open SoC based upon the Arty platform ## ## Purpose: To install a new program into the Arty, using the main ## programming slot (slot 0). ## ## Creator: Dan Gisselquist, Ph.D. ## Gisselquist Technology, LLC ## ################################################################################ ## ## Copyright (C) 2015-2016, Gisselquist Technology, LLC ## ## This program is free software (firmware): you can redistribute it and/or ## modify it under the terms of the GNU General Public License as published ## by the Free Software Foundation, either version 3 of the License, or (at ## your option) any later version. ## ## This program is distributed in the hope that it will be useful, but WITHOUT ## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ## for more details. ## ## You should have received a copy of the GNU General Public License along ## with this program. (It's in the $(ROOT)/doc directory, run make with no ## target there if the PDF file isn't present.) If not, see ## <http://www.gnu.org/licenses/> for a copy. ## ## License: GPL, v3, as defined and found on www.gnu.org, ## http://www.gnu.org/licenses/gpl.html ## ## ################################################################################ ## ## export PATH=$PATH:. export BINFILE=../../xilinx/openarty.runs/impl_1/toplevel.bin WBREGS=wbregs WBPROG=wbprogram # # $WBREGS qspiv 0x8b # Accomplished by the flash driver # $WBREGS stopwatch 2 # Clear and stop the stopwatch $WBREGS stopwatch 1 # Start the stopwatch echo $WBPROG @0x0400000 $BINFILE $WBPROG @0x0400000 $BINFILE $WBREGS stopwatch 0 # Stop the stopwatch, we are done $WBREGS stopwatch # Print out the time on the stopwatch $WBREGS wbstar 0 $WBREGS fpgacmd 15 sleep 1 RED=0x00ff0000 GREEN=0x0000ff00 WHITE=0x000f0f0f BLACK=0x00000000 DIMGREEN=0x00001f00 $WBREGS led 0x0f $WBREGS clrled0 $RED $WBREGS clrled1 $RED $WBREGS clrled2 $RED $WBREGS clrled3 $RED sleep 1 $WBREGS clrled0 $GREEN $WBREGS led 0x10 sleep 1 $WBREGS clrled1 $GREEN $WBREGS clrled0 $DIMGREEN $WBREGS led 0x20 sleep 1 $WBREGS clrled2 $GREEN $WBREGS clrled1 $DIMGREEN $WBREGS led 0x40 if [[ -x ./wbsettime ]]; then ./wbsettime fi $WBREGS clrled3 $GREEN $WBREGS clrled2 $DIMGREEN $WBREGS led 0x80 sleep 1 $WBREGS clrled0 $WHITE $WBREGS clrled1 $BLACK $WBREGS clrled2 $BLACK $WBREGS clrled3 $WHITE $WBREGS led 0x00
Go to most recent revision | Compare with Previous | Blame | View Log