OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [core/] [bench/] [verilog/] [tb_openMSP430.v] - Rev 186

Go to most recent revision | Compare with Previous | Blame | View Log

//----------------------------------------------------------------------------
// Copyright (C) 2001 Authors
//
// This source file may be used and distributed without restriction provided
// that this copyright statement is not removed from the file and that any
// derivative work contains the original copyright notice and the associated
// disclaimer.
//
// This source file is free software; you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published
// by the Free Software Foundation; either version 2.1 of the License, or
// (at your option) any later version.
//
// This source is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
// License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this source; if not, write to the Free Software Foundation,
// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
//
//----------------------------------------------------------------------------
// 
// *File Name: tb_openMSP430.v
// 
// *Module Description:
//                      openMSP430 testbench
//
// *Author(s):
//              - Olivier Girard,    olgirard@gmail.com
//
//----------------------------------------------------------------------------
// $Rev: 154 $
// $LastChangedBy: olivier.girard $
// $LastChangedDate: 2012-10-15 22:44:20 +0200 (Mon, 15 Oct 2012) $
//----------------------------------------------------------------------------
`include "timescale.v"
`ifdef OMSP_NO_INCLUDE
`else
`include "openMSP430_defines.v"
`endif
 
module  tb_openMSP430;
 
//
// Wire & Register definition
//------------------------------
 
// Data Memory interface
wire [`DMEM_MSB:0] dmem_addr;
wire               dmem_cen;
wire        [15:0] dmem_din;
wire         [1:0] dmem_wen;
wire        [15:0] dmem_dout;
 
// Program Memory interface
wire [`PMEM_MSB:0] pmem_addr;
wire               pmem_cen;
wire        [15:0] pmem_din;
wire         [1:0] pmem_wen;
wire        [15:0] pmem_dout;
 
// Peripherals interface
wire        [13:0] per_addr;
wire        [15:0] per_din;
wire        [15:0] per_dout;
wire         [1:0] per_we;
wire               per_en;
 
// Digital I/O
wire               irq_port1;
wire               irq_port2;
wire        [15:0] per_dout_dio;
wire         [7:0] p1_dout;
wire         [7:0] p1_dout_en;
wire         [7:0] p1_sel;
wire         [7:0] p2_dout;
wire         [7:0] p2_dout_en;
wire         [7:0] p2_sel;
wire         [7:0] p3_dout;
wire         [7:0] p3_dout_en;
wire         [7:0] p3_sel;
wire         [7:0] p4_dout;
wire         [7:0] p4_dout_en;
wire         [7:0] p4_sel;
wire         [7:0] p5_dout;
wire         [7:0] p5_dout_en;
wire         [7:0] p5_sel;
wire         [7:0] p6_dout;
wire         [7:0] p6_dout_en;
wire         [7:0] p6_sel;
reg          [7:0] p1_din;
reg          [7:0] p2_din;
reg          [7:0] p3_din;
reg          [7:0] p4_din;
reg          [7:0] p5_din;
reg          [7:0] p6_din;
 
// Peripheral templates
wire        [15:0] per_dout_temp_8b;
wire        [15:0] per_dout_temp_16b;
 
// Simple full duplex UART
wire        [15:0] per_dout_uart;
wire               irq_uart_rx;
wire               irq_uart_tx;
wire               uart_txd;
reg                uart_rxd;
 
// Timer A
wire               irq_ta0;
wire               irq_ta1;
wire        [15:0] per_dout_timerA;
reg                inclk;
reg                taclk;
reg                ta_cci0a;
reg                ta_cci0b;
reg                ta_cci1a;
reg                ta_cci1b;
reg                ta_cci2a;
reg                ta_cci2b;
wire               ta_out0;
wire               ta_out0_en;
wire               ta_out1;
wire               ta_out1_en;
wire               ta_out2;
wire               ta_out2_en;
 
// Clock / Reset & Interrupts
reg                dco_clk;
wire               dco_enable;
wire               dco_wkup;
reg                dco_local_enable;
reg                lfxt_clk;
wire               lfxt_enable;
wire               lfxt_wkup;
reg                lfxt_local_enable;
wire               mclk;
wire               aclk;
wire               aclk_en;
wire               smclk;
wire               smclk_en;
reg                reset_n;
wire               puc_rst;
reg                nmi;
reg         [13:0] irq;
wire        [13:0] irq_acc;
wire        [13:0] irq_in;
reg                cpu_en;
reg         [13:0] wkup;
wire        [13:0] wkup_in;
 
// Scan (ASIC version only)
reg                scan_enable;
reg                scan_mode;
 
// Debug interface: UART
reg                dbg_en;
wire               dbg_freeze;
wire               dbg_uart_txd;
wire               dbg_uart_rxd;
reg                dbg_uart_rxd_sel;
reg                dbg_uart_rxd_dly;
reg                dbg_uart_rxd_pre;
reg                dbg_uart_rxd_meta;
reg         [15:0] dbg_uart_buf;
reg                dbg_uart_rx_busy;
reg                dbg_uart_tx_busy;
 
// Debug interface: I2C
wire               dbg_scl;
wire               dbg_sda;
wire               dbg_scl_slave;
wire               dbg_scl_master;
reg                dbg_scl_master_sel;
reg                dbg_scl_master_dly;
reg                dbg_scl_master_pre;
reg                dbg_scl_master_meta;
wire               dbg_sda_slave_out;
wire               dbg_sda_slave_in;
wire               dbg_sda_master_out;
reg                dbg_sda_master_out_sel;
reg                dbg_sda_master_out_dly;
reg                dbg_sda_master_out_pre;
reg                dbg_sda_master_out_meta;
wire               dbg_sda_master_in;
reg         [15:0] dbg_i2c_buf;
reg     [8*32-1:0] dbg_i2c_string;
 
// Core testbench debuging signals
wire    [8*32-1:0] i_state;
wire    [8*32-1:0] e_state;
wire        [31:0] inst_cycle;
wire    [8*32-1:0] inst_full;
wire        [31:0] inst_number;
wire        [15:0] inst_pc;
wire    [8*32-1:0] inst_short;
 
// Testbench variables
integer            error;
reg                stimulus_done;
 
 
//
// Include files
//------------------------------
 
// CPU & Memory registers
`include "registers.v"
 
// Debug interface tasks
`include "dbg_uart_tasks.v"
`include "dbg_i2c_tasks.v"
 
// Simple uart tasks
//`include "uart_tasks.v"
 
// Verilog stimulus
`include "stimulus.v"
 
 
//
// Initialize ROM
//------------------------------
initial
  begin
     #10 $readmemh("./pmem.mem", pmem_0.mem);
  end
 
//
// Generate Clock & Reset
//------------------------------
initial
  begin
     dco_clk          = 1'b0;
     dco_local_enable = 1'b0;
     forever
       begin
	  #25;   // 20 MHz
	  dco_local_enable = (dco_enable===1) ? dco_enable : (dco_wkup===1);
	  if (dco_local_enable)
	    dco_clk = ~dco_clk;
       end
  end
 
initial
  begin
     lfxt_clk          = 1'b0;
     lfxt_local_enable = 1'b0;
     forever
       begin
	  #763;  // 655 kHz
	  lfxt_local_enable = (lfxt_enable===1) ? lfxt_enable : (lfxt_wkup===1);
	  if (lfxt_local_enable)
	    lfxt_clk = ~lfxt_clk;
       end
  end
 
initial
  begin
     reset_n       = 1'b1;
     #93;
     reset_n       = 1'b0;
     #593;
     reset_n       = 1'b1;
  end
 
initial
  begin
     error                   = 0;
     stimulus_done           = 1;
     irq                     = 14'h0000;
     nmi                     = 1'b0;
     wkup                    = 14'h0000;
     cpu_en                  = 1'b1;
     dbg_en                  = 1'b0;
     dbg_uart_rxd_sel        = 1'b0;
     dbg_uart_rxd_dly        = 1'b1;
     dbg_uart_rxd_pre        = 1'b1;
     dbg_uart_rxd_meta       = 1'b0;
     dbg_uart_buf            = 16'h0000;
     dbg_uart_rx_busy        = 1'b0;
     dbg_uart_tx_busy        = 1'b0;
     dbg_scl_master_sel      = 1'b0;
     dbg_scl_master_dly      = 1'b1;
     dbg_scl_master_pre      = 1'b1;
     dbg_scl_master_meta     = 1'b0;
     dbg_sda_master_out_sel  = 1'b0;
     dbg_sda_master_out_dly  = 1'b1;
     dbg_sda_master_out_pre  = 1'b1;
     dbg_sda_master_out_meta = 1'b0;
     dbg_i2c_string          = "";
     p1_din                  = 8'h00;
     p2_din                  = 8'h00;
     p3_din                  = 8'h00;
     p4_din                  = 8'h00;
     p5_din                  = 8'h00;
     p6_din                  = 8'h00;
     inclk                   = 1'b0;
     taclk                   = 1'b0;
     ta_cci0a                = 1'b0;
     ta_cci0b                = 1'b0;
     ta_cci1a                = 1'b0;
     ta_cci1b                = 1'b0;
     ta_cci2a                = 1'b0;
     ta_cci2b                = 1'b0;
     uart_rxd                = 1'b1;
     scan_enable             = 1'b0;
     scan_mode               = 1'b0;
  end
 
 
//
// Program Memory
//----------------------------------
 
ram #(`PMEM_MSB, `PMEM_SIZE) pmem_0 (
 
// OUTPUTs
    .ram_dout    (pmem_dout),          // Program Memory data output
 
// INPUTs
    .ram_addr    (pmem_addr),          // Program Memory address
    .ram_cen     (pmem_cen),           // Program Memory chip enable (low active)
    .ram_clk     (mclk),               // Program Memory clock
    .ram_din     (pmem_din),           // Program Memory data input
    .ram_wen     (pmem_wen)            // Program Memory write enable (low active)
);
 
 
//
// Data Memory
//----------------------------------
 
ram #(`DMEM_MSB, `DMEM_SIZE) dmem_0 (
 
// OUTPUTs
    .ram_dout    (dmem_dout),          // Data Memory data output
 
// INPUTs
    .ram_addr    (dmem_addr),          // Data Memory address
    .ram_cen     (dmem_cen),           // Data Memory chip enable (low active)
    .ram_clk     (mclk),               // Data Memory clock
    .ram_din     (dmem_din),           // Data Memory data input
    .ram_wen     (dmem_wen)            // Data Memory write enable (low active)
);
 
 
//
// openMSP430 Instance
//----------------------------------
 
openMSP430 dut (
 
// OUTPUTs
    .aclk              (aclk),              // ASIC ONLY: ACLK
    .aclk_en           (aclk_en),           // FPGA ONLY: ACLK enable
    .dbg_freeze        (dbg_freeze),        // Freeze peripherals
    .dbg_i2c_sda_out   (dbg_sda_slave_out), // Debug interface: I2C SDA OUT
    .dbg_uart_txd      (dbg_uart_txd),      // Debug interface: UART TXD
    .dco_enable        (dco_enable),        // ASIC ONLY: Fast oscillator enable
    .dco_wkup          (dco_wkup),          // ASIC ONLY: Fast oscillator wake-up (asynchronous)
    .dmem_addr         (dmem_addr),         // Data Memory address
    .dmem_cen          (dmem_cen),          // Data Memory chip enable (low active)
    .dmem_din          (dmem_din),          // Data Memory data input
    .dmem_wen          (dmem_wen),          // Data Memory write enable (low active)
    .irq_acc           (irq_acc),           // Interrupt request accepted (one-hot signal)
    .lfxt_enable       (lfxt_enable),       // ASIC ONLY: Low frequency oscillator enable
    .lfxt_wkup         (lfxt_wkup),         // ASIC ONLY: Low frequency oscillator wake-up (asynchronous)
    .mclk              (mclk),              // Main system clock
    .per_addr          (per_addr),          // Peripheral address
    .per_din           (per_din),           // Peripheral data input
    .per_we            (per_we),            // Peripheral write enable (high active)
    .per_en            (per_en),            // Peripheral enable (high active)
    .pmem_addr         (pmem_addr),         // Program Memory address
    .pmem_cen          (pmem_cen),          // Program Memory chip enable (low active)
    .pmem_din          (pmem_din),          // Program Memory data input (optional)
    .pmem_wen          (pmem_wen),          // Program Memory write enable (low active) (optional)
    .puc_rst           (puc_rst),           // Main system reset
    .smclk             (smclk),             // ASIC ONLY: SMCLK
    .smclk_en          (smclk_en),          // FPGA ONLY: SMCLK enable
 
// INPUTs
    .cpu_en            (cpu_en),            // Enable CPU code execution (asynchronous)
    .dbg_en            (dbg_en),            // Debug interface enable (asynchronous)
    .dbg_i2c_addr      (I2C_ADDR),          // Debug interface: I2C Address
    .dbg_i2c_broadcast (I2C_BROADCAST),     // Debug interface: I2C Broadcast Address (for multicore systems)
    .dbg_i2c_scl       (dbg_scl_slave),     // Debug interface: I2C SCL
    .dbg_i2c_sda_in    (dbg_sda_slave_in),  // Debug interface: I2C SDA IN
    .dbg_uart_rxd      (dbg_uart_rxd),      // Debug interface: UART RXD (asynchronous)
    .dco_clk           (dco_clk),           // Fast oscillator (fast clock)
    .dmem_dout         (dmem_dout),         // Data Memory data output
    .irq               (irq_in),            // Maskable interrupts
    .lfxt_clk          (lfxt_clk),          // Low frequency oscillator (typ 32kHz)
    .nmi               (nmi),               // Non-maskable interrupt (asynchronous)
    .per_dout          (per_dout),          // Peripheral data output
    .pmem_dout         (pmem_dout),         // Program Memory data output
    .reset_n           (reset_n),           // Reset Pin (low active, asynchronous)
    .scan_enable       (scan_enable),       // ASIC ONLY: Scan enable (active during scan shifting)
    .scan_mode         (scan_mode),         // ASIC ONLY: Scan mode
    .wkup              (|wkup_in)           // ASIC ONLY: System Wake-up (asynchronous)
);
 
//
// Digital I/O
//----------------------------------
 
`ifdef CVER
omsp_gpio #(1,
            1,
            1,
            1,
            1,
            1)         gpio_0 (
`else
omsp_gpio #(.P1_EN(1),
            .P2_EN(1),
            .P3_EN(1),
            .P4_EN(1),
            .P5_EN(1),
            .P6_EN(1)) gpio_0 (
`endif
 
// OUTPUTs
    .irq_port1    (irq_port1),         // Port 1 interrupt
    .irq_port2    (irq_port2),         // Port 2 interrupt
    .p1_dout      (p1_dout),           // Port 1 data output
    .p1_dout_en   (p1_dout_en),        // Port 1 data output enable
    .p1_sel       (p1_sel),            // Port 1 function select
    .p2_dout      (p2_dout),           // Port 2 data output
    .p2_dout_en   (p2_dout_en),        // Port 2 data output enable
    .p2_sel       (p2_sel),            // Port 2 function select
    .p3_dout      (p3_dout),           // Port 3 data output
    .p3_dout_en   (p3_dout_en),        // Port 3 data output enable
    .p3_sel       (p3_sel),            // Port 3 function select
    .p4_dout      (p4_dout),           // Port 4 data output
    .p4_dout_en   (p4_dout_en),        // Port 4 data output enable
    .p4_sel       (p4_sel),            // Port 4 function select
    .p5_dout      (p5_dout),           // Port 5 data output
    .p5_dout_en   (p5_dout_en),        // Port 5 data output enable
    .p5_sel       (p5_sel),            // Port 5 function select
    .p6_dout      (p6_dout),           // Port 6 data output
    .p6_dout_en   (p6_dout_en),        // Port 6 data output enable
    .p6_sel       (p6_sel),            // Port 6 function select
    .per_dout     (per_dout_dio),      // Peripheral data output
 
// INPUTs
    .mclk         (mclk),              // Main system clock
    .p1_din       (p1_din),            // Port 1 data input
    .p2_din       (p2_din),            // Port 2 data input
    .p3_din       (p3_din),            // Port 3 data input
    .p4_din       (p4_din),            // Port 4 data input
    .p5_din       (p5_din),            // Port 5 data input
    .p6_din       (p6_din),            // Port 6 data input
    .per_addr     (per_addr),          // Peripheral address
    .per_din      (per_din),           // Peripheral data input
    .per_en       (per_en),            // Peripheral enable (high active)
    .per_we       (per_we),            // Peripheral write enable (high active)
    .puc_rst      (puc_rst)            // Main system reset
);
 
//
// Timers
//----------------------------------
 
omsp_timerA timerA_0 (
 
// OUTPUTs
    .irq_ta0      (irq_ta0),           // Timer A interrupt: TACCR0
    .irq_ta1      (irq_ta1),           // Timer A interrupt: TAIV, TACCR1, TACCR2
    .per_dout     (per_dout_timerA),   // Peripheral data output
    .ta_out0      (ta_out0),           // Timer A output 0
    .ta_out0_en   (ta_out0_en),        // Timer A output 0 enable
    .ta_out1      (ta_out1),           // Timer A output 1
    .ta_out1_en   (ta_out1_en),        // Timer A output 1 enable
    .ta_out2      (ta_out2),           // Timer A output 2
    .ta_out2_en   (ta_out2_en),        // Timer A output 2 enable
 
// INPUTs
    .aclk_en      (aclk_en),           // ACLK enable (from CPU)
    .dbg_freeze   (dbg_freeze),        // Freeze Timer A counter
    .inclk        (inclk),             // INCLK external timer clock (SLOW)
    .irq_ta0_acc  (irq_acc[9]),        // Interrupt request TACCR0 accepted
    .mclk         (mclk),              // Main system clock
    .per_addr     (per_addr),          // Peripheral address
    .per_din      (per_din),           // Peripheral data input
    .per_en       (per_en),            // Peripheral enable (high active)
    .per_we       (per_we),            // Peripheral write enable (high active)
    .puc_rst      (puc_rst),           // Main system reset
    .smclk_en     (smclk_en),          // SMCLK enable (from CPU)
    .ta_cci0a     (ta_cci0a),          // Timer A compare 0 input A
    .ta_cci0b     (ta_cci0b),          // Timer A compare 0 input B
    .ta_cci1a     (ta_cci1a),          // Timer A compare 1 input A
    .ta_cci1b     (ta_cci1b),          // Timer A compare 1 input B
    .ta_cci2a     (ta_cci2a),          // Timer A compare 2 input A
    .ta_cci2b     (ta_cci2b),          // Timer A compare 2 input B
    .taclk        (taclk)              // TACLK external timer clock (SLOW)
);
 
//
// Simple full duplex UART (8N1 protocol)
//----------------------------------------
`ifdef READY_FOR_PRIMETIME
omsp_uart #(.BASE_ADDR(15'h0080)) uart_0 (
 
// OUTPUTs
    .irq_uart_rx  (irq_uart_rx),   // UART receive interrupt
    .irq_uart_tx  (irq_uart_tx),   // UART transmit interrupt
    .per_dout     (per_dout_uart), // Peripheral data output
    .uart_txd     (uart_txd),      // UART Data Transmit (TXD)
 
// INPUTs
    .mclk         (mclk),          // Main system clock
    .per_addr     (per_addr),      // Peripheral address
    .per_din      (per_din),       // Peripheral data input
    .per_en       (per_en),        // Peripheral enable (high active)
    .per_we       (per_we),        // Peripheral write enable (high active)
    .puc_rst      (puc_rst),       // Main system reset
    .smclk_en     (smclk_en),      // SMCLK enable (from CPU)
    .uart_rxd     (uart_rxd)       // UART Data Receive (RXD)
);
`else
    assign irq_uart_rx   =  1'b0;
    assign irq_uart_tx   =  1'b0;
    assign per_dout_uart = 16'h0000;
    assign uart_txd      =  1'b0;
`endif
 
//
// Peripheral templates
//----------------------------------
 
template_periph_8b template_periph_8b_0 (
 
// OUTPUTs
    .per_dout     (per_dout_temp_8b),  // Peripheral data output
 
// INPUTs
    .mclk         (mclk),              // Main system clock
    .per_addr     (per_addr),          // Peripheral address
    .per_din      (per_din),           // Peripheral data input
    .per_en       (per_en),            // Peripheral enable (high active)
    .per_we       (per_we),            // Peripheral write enable (high active)
    .puc_rst      (puc_rst)            // Main system reset
);
 
`ifdef CVER
template_periph_16b #(15'h0190)             template_periph_16b_0 (
`else
template_periph_16b #(.BASE_ADDR((15'd`PER_SIZE-15'h0070) & 15'h7ff8)) template_periph_16b_0 (
`endif
// OUTPUTs
    .per_dout     (per_dout_temp_16b), // Peripheral data output
 
// INPUTs
    .mclk         (mclk),              // Main system clock
    .per_addr     (per_addr),          // Peripheral address
    .per_din      (per_din),           // Peripheral data input
    .per_en       (per_en),            // Peripheral enable (high active)
    .per_we       (per_we),            // Peripheral write enable (high active)
    .puc_rst      (puc_rst)            // Main system reset
);
 
 
//
// Combine peripheral data bus
//----------------------------------
 
assign per_dout = per_dout_dio       |
                  per_dout_timerA    |
                  per_dout_uart      |
                  per_dout_temp_8b   |
                  per_dout_temp_16b;
 
 
//
// Map peripheral interrupts & wakeups
//----------------------------------------
 
assign irq_in  = irq  | {1'b0,           // Vector 13  (0xFFFA)
                         1'b0,           // Vector 12  (0xFFF8)
                         1'b0,           // Vector 11  (0xFFF6)
                         1'b0,           // Vector 10  (0xFFF4) - Watchdog -
                         irq_ta0,        // Vector  9  (0xFFF2)
                         irq_ta1,        // Vector  8  (0xFFF0)
                         irq_uart_rx,    // Vector  7  (0xFFEE)
                         irq_uart_tx,    // Vector  6  (0xFFEC)
                         1'b0,           // Vector  5  (0xFFEA)
                         1'b0,           // Vector  4  (0xFFE8)
                         irq_port2,      // Vector  3  (0xFFE6)
                         irq_port1,      // Vector  2  (0xFFE4)
                         1'b0,           // Vector  1  (0xFFE2)
                         1'b0};          // Vector  0  (0xFFE0)
 
assign wkup_in = wkup | {1'b0,           // Vector 13  (0xFFFA)
                         1'b0,           // Vector 12  (0xFFF8)
                         1'b0,           // Vector 11  (0xFFF6)
                         1'b0,           // Vector 10  (0xFFF4) - Watchdog -
                         1'b0,           // Vector  9  (0xFFF2)
                         1'b0,           // Vector  8  (0xFFF0)
                         1'b0,           // Vector  7  (0xFFEE)
                         1'b0,           // Vector  6  (0xFFEC)
                         1'b0,           // Vector  5  (0xFFEA)
                         1'b0,           // Vector  4  (0xFFE8)
                         1'b0,           // Vector  3  (0xFFE6)
                         1'b0,           // Vector  2  (0xFFE4)
                         1'b0,           // Vector  1  (0xFFE2)
                         1'b0};          // Vector  0  (0xFFE0)
 
 
//
// I2C serial debug interface
//----------------------------------
 
// I2C Bus
//.........................
pullup dbg_scl_inst (dbg_scl); 
pullup dbg_sda_inst (dbg_sda); 
 
// I2C Slave (openMSP430)
//.........................
io_cell scl_slave_inst (
  .pad         (dbg_scl),             // I/O pad
  .data_in     (dbg_scl_slave),       // Input
  .data_out_en (1'b0),                // Output enable
  .data_out    (1'b0)                 // Output
);
 
io_cell sda_slave_inst (
  .pad         (dbg_sda),             // I/O pad
  .data_in     (dbg_sda_slave_in),    // Input
  .data_out_en (!dbg_sda_slave_out),  // Output enable
  .data_out    (1'b0)                 // Output
);
 
// I2C Master (Debugger)
//.........................
io_cell scl_master_inst (
  .pad         (dbg_scl),             // I/O pad
  .data_in     (),                    // Input
  .data_out_en (!dbg_scl_master),     // Output enable
  .data_out    (1'b0)                 // Output
);
 
io_cell sda_master_inst (
  .pad         (dbg_sda),             // I/O pad
  .data_in     (dbg_sda_master_in),   // Input
  .data_out_en (!dbg_sda_master_out), // Output enable
  .data_out    (1'b0)                 // Output
);
 
 
//
// Debug utility signals
//----------------------------------------
msp_debug msp_debug_0 (
 
// OUTPUTs
    .e_state      (e_state),           // Execution state
    .i_state      (i_state),           // Instruction fetch state
    .inst_cycle   (inst_cycle),        // Cycle number within current instruction
    .inst_full    (inst_full),         // Currently executed instruction (full version)
    .inst_number  (inst_number),       // Instruction number since last system reset
    .inst_pc      (inst_pc),           // Instruction Program counter
    .inst_short   (inst_short),        // Currently executed instruction (short version)
 
// INPUTs
    .mclk         (mclk),              // Main system clock
    .puc_rst      (puc_rst)            // Main system reset
);
 
 
//
// Generate Waveform
//----------------------------------------
initial
  begin
   `ifdef NODUMP
   `else
     `ifdef VPD_FILE
        $vcdplusfile("tb_openMSP430.vpd");
        $vcdpluson();
     `else
       `ifdef TRN_FILE
          $recordfile ("tb_openMSP430.trn");
          $recordvars;
       `else
          $dumpfile("tb_openMSP430.vcd");
          $dumpvars(0, tb_openMSP430);
       `endif
     `endif
   `endif
  end
 
//
// End of simulation
//----------------------------------------
 
initial // Timeout
  begin
   `ifdef NO_TIMEOUT
   `else
     `ifdef VERY_LONG_TIMEOUT
       #500000000;
     `else     
     `ifdef LONG_TIMEOUT
       #5000000;
     `else     
       #500000;
     `endif
     `endif
       $display(" ===============================================");
       $display("|               SIMULATION FAILED               |");
       $display("|              (simulation Timeout)             |");
       $display(" ===============================================");
       $finish;
   `endif
  end
 
initial // Normal end of test
  begin
     @(negedge stimulus_done);
     wait(inst_pc=='hffff);
 
     $display(" ===============================================");
     if (error!=0)
       begin
	  $display("|               SIMULATION FAILED               |");
	  $display("|     (some verilog stimulus checks failed)     |");
       end
     else if (~stimulus_done)
       begin
	  $display("|               SIMULATION FAILED               |");
	  $display("|     (the verilog stimulus didn't complete)    |");
       end
     else 
       begin
	  $display("|               SIMULATION PASSED               |");
       end
     $display(" ===============================================");
     $finish;
  end
 
 
//
// Tasks Definition
//------------------------------
 
   task tb_error;
      input [65*8:0] error_string;
      begin
	 $display("ERROR: %s %t", error_string, $time);
	 error = error+1;
      end
   endtask
 
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.