Subversion Repositories openmsp430

//----------------------------------------------------------------------------
// Copyright (C) 2009 , Olivier Girard
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//     * Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     * Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in the
//       documentation and/or other materials provided with the distribution.
//     * Neither the name of the authors nor the names of its contributors
//       may be used to endorse or promote products derived from this software
//       without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
// THE POSSIBILITY OF SUCH DAMAGE
//
//----------------------------------------------------------------------------
//
// *File Name: omsp_clock_mux.v
//
// *Module Description:
//                       Standard clock mux for the openMSP430
//
// *Author(s):
//              - Olivier Girard,    olgirard@gmail.com
//
//----------------------------------------------------------------------------
// $Rev: 103 $
// $LastChangedBy: olivier.girard $
// $LastChangedDate: 2011-03-05 15:44:48 +0100 (Sat, 05 Mar 2011) $
//----------------------------------------------------------------------------
 
module  omsp_clock_mux (
 
// OUTPUTs
    clk_out,                   // Clock output
 
// INPUTs
    clk_in0,                   // Clock input 0
    clk_in1,                   // Clock input 1
    reset,                     // Reset
    scan_mode,                 // Scan mode (clk_in0 is selected in scan mode)
    select_in                  // Clock selection
);
 
// OUTPUTs
//=========
output         clk_out;        // Clock output
 
// INPUTs
//=========
input          clk_in0;        // Clock input 0
input          clk_in1;        // Clock input 1
input          reset;          // Reset
input          scan_mode;      // Scan mode (clk_in0 is selected in scan mode)
input          select_in;      // Clock selection
 
 
//===========================================================================================================================//
// 1)  CLOCK MUX                                                                                                             //
//===========================================================================================================================//
//                                                                                                                           //
//    The following (glitch free) clock mux is implemented as following:                                                     //
//                                                                                                                           //
//                                                                                                                           //
//                                                                                                                           //
//                                                                                                                           //
//                                   +-----.     +--------+   +--------+                                                     //
//    select_in >>----+-------------O|      \    |        |   |        |          +-----.                                    //
//                    |              |       |---| D    Q |---| D    Q |--+-------|      \                                   //
//                    |     +-------O|      /    |        |   |        |  |       |       |O-+                               //
//                    |     |        +-----'     |        |   |        |  |   +--O|      /   |                               //
//                    |     |                    |   /\   |   |   /\   |  |   |   +-----'    |                               //
//                    |     |                    +--+--+--+   +--+--+--+  |   |              |                               //
//                    |     |                        O            |       |   |              |                               //
//                    |     |                        |            |       |   |              |  +-----.                      //
//       clk_in0 >>----------------------------------+------------+-----------+              +--|      \                     //
//                    |     |                                             |                     |       |----<< clk_out      //
//                    |     |     +---------------------------------------+                  +--|      /                     //
//                    |     |     |                                                          |  +-----'                      //
//                    |     +---------------------------------------------+                  |                               //
//                    |           |                                       |                  |                               //
//                    |           |  +-----.     +--------+   +--------+  |                  |                               //
//                    |           +-O|      \    |        |   |        |  |       +-----.    |                               //
//                    |              |       |---| D    Q |---| D    Q |--+-------|      \   |                               //
//                    +--------------|      /    |        |   |        |          |       |O-+                               //
//                                   +-----'     |        |   |        |      +--O|      /                                   //
//                                               |   /\   |   |   /\   |      |   +-----'                                    //
//                                               +--+--+--+   +--+--+--+      |                                              //
//                                                   O            |           |                                              //
//                                                   |            |           |                                              //
//       clk_in1 >>----------------------------------+------------+-----------+                                              //
//                                                                                                                           //
//                                                                                                                           //
//===========================================================================================================================//
 
//-----------------------------------------------------------------------------
// Wire declarations
//-----------------------------------------------------------------------------
 
wire in0_select;
reg  in0_select_s;
reg  in0_select_ss;
wire in0_enable;
 
wire in1_select;
reg  in1_select_s;
reg  in1_select_ss;
wire in1_enable;
 
wire clk_in0_inv;
wire clk_in1_inv;
wire clk_in0_scan_fix_inv;
wire clk_in1_scan_fix_inv;
wire gated_clk_in0;
wire gated_clk_in1;
 
//-----------------------------------------------------------------------------
// Optional scan repair for neg-edge clocked FF
//-----------------------------------------------------------------------------
`ifdef SCAN_REPAIR_INV_CLOCKS
   omsp_scan_mux scan_mux_repair_clk_in0_inv (.scan_mode(scan_mode), .data_in_scan(clk_in0), .data_in_func(~clk_in0), .data_out(clk_in0_scan_fix_inv));
   omsp_scan_mux scan_mux_repair_clk_in1_inv (.scan_mode(scan_mode), .data_in_scan(clk_in1), .data_in_func(~clk_in1), .data_out(clk_in1_scan_fix_inv));
`else
   assign clk_in0_scan_fix_inv = ~clk_in0;
   assign clk_in1_scan_fix_inv = ~clk_in1;
`endif
 
//-----------------------------------------------------------------------------
// CLK_IN0 Selection
//-----------------------------------------------------------------------------
 
assign in0_select = ~select_in & ~in1_select_ss;
 
always @ (posedge clk_in0_scan_fix_inv or posedge reset)
  if (reset) in0_select_s  <=  1'b1;
  else       in0_select_s  <=  in0_select;
 
always @ (posedge clk_in0              or posedge reset)
  if (reset) in0_select_ss <=  1'b1;
  else       in0_select_ss <=  in0_select_s;
 
assign in0_enable = in0_select_ss | scan_mode;
 
 
//-----------------------------------------------------------------------------
// CLK_IN1 Selection
//-----------------------------------------------------------------------------
 
assign in1_select =  select_in & ~in0_select_ss;
 
always @ (posedge clk_in1_scan_fix_inv or posedge reset)
  if (reset) in1_select_s  <=  1'b0;
  else       in1_select_s  <=  in1_select;
 
always @ (posedge clk_in1     or posedge reset)
  if (reset) in1_select_ss <=  1'b0;
  else       in1_select_ss <=  in1_select_s;
 
assign in1_enable = in1_select_ss & ~scan_mode;
 
 
//-----------------------------------------------------------------------------
// Clock MUX
//-----------------------------------------------------------------------------
//
// IMPORTANT NOTE:
//                  Because the clock network is a critical part of the design,
//                 the following combinatorial logic should be replaced with
//                 direct instanciation of standard cells from target library.
//                  Don't forget the "dont_touch" attribute to make sure
//                 synthesis won't mess it up.
//
 
// Replace with standard cell INVERTER
assign clk_in0_inv   = ~clk_in0;
assign clk_in1_inv   = ~clk_in1;
 
// Replace with standard cell NAND2
assign gated_clk_in0 = ~(clk_in0_inv & in0_enable);
assign gated_clk_in1 = ~(clk_in1_inv & in1_enable);
 
 
// Replace with standard cell AND2
assign clk_out       =  (gated_clk_in0 & gated_clk_in1);
 
 
 
endmodule // omsp_clock_gate