URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [core/] [rtl/] [verilog/] [omsp_mem_backbone.v] - Rev 204
Go to most recent revision | Compare with Previous | Blame | View Log
//---------------------------------------------------------------------------- // Copyright (C) 2009 , Olivier Girard // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // * Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // * Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // * Neither the name of the authors nor the names of its contributors // may be used to endorse or promote products derived from this software // without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, // OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF // THE POSSIBILITY OF SUCH DAMAGE // //---------------------------------------------------------------------------- // // *File Name: omsp_mem_backbone.v // // *Module Description: // Memory interface backbone (decoder + arbiter) // // *Author(s): // - Olivier Girard, olgirard@gmail.com // //---------------------------------------------------------------------------- // $Rev: 202 $ // $LastChangedBy: olivier.girard $ // $LastChangedDate: 2015-07-01 23:13:32 +0200 (Wed, 01 Jul 2015) $ //---------------------------------------------------------------------------- `ifdef OMSP_NO_INCLUDE `else `include "openMSP430_defines.v" `endif module omsp_mem_backbone ( // OUTPUTs cpu_halt_cmd, // Halt CPU command dbg_mem_din, // Debug unit Memory data input dmem_addr, // Data Memory address dmem_cen, // Data Memory chip enable (low active) dmem_din, // Data Memory data input dmem_wen, // Data Memory write enable (low active) eu_mdb_in, // Execution Unit Memory data bus input fe_mdb_in, // Frontend Memory data bus input fe_pmem_wait, // Frontend wait for Instruction fetch dma_dout, // Direct Memory Access data output dma_ready, // Direct Memory Access is complete dma_resp, // Direct Memory Access response (0:Okay / 1:Error) per_addr, // Peripheral address per_din, // Peripheral data input per_we, // Peripheral write enable (high active) per_en, // Peripheral enable (high active) pmem_addr, // Program Memory address pmem_cen, // Program Memory chip enable (low active) pmem_din, // Program Memory data input (optional) pmem_wen, // Program Memory write enable (low active) (optional) // INPUTs cpu_halt_st, // Halt/Run status from CPU dbg_halt_cmd, // Debug interface Halt CPU command dbg_mem_addr, // Debug address for rd/wr access dbg_mem_dout, // Debug unit data output dbg_mem_en, // Debug unit memory enable dbg_mem_wr, // Debug unit memory write dmem_dout, // Data Memory data output eu_mab, // Execution Unit Memory address bus eu_mb_en, // Execution Unit Memory bus enable eu_mb_wr, // Execution Unit Memory bus write transfer eu_mdb_out, // Execution Unit Memory data bus output fe_mab, // Frontend Memory address bus fe_mb_en, // Frontend Memory bus enable mclk, // Main system clock dma_addr, // Direct Memory Access address dma_din, // Direct Memory Access data input dma_en, // Direct Memory Access enable (high active) dma_priority, // Direct Memory Access priority (0:low / 1:high) dma_we, // Direct Memory Access write byte enable (high active) per_dout, // Peripheral data output pmem_dout, // Program Memory data output puc_rst, // Main system reset scan_enable // Scan enable (active during scan shifting) ); // OUTPUTs //========= output cpu_halt_cmd; // Halt CPU command output [15:0] dbg_mem_din; // Debug unit Memory data input output [`DMEM_MSB:0] dmem_addr; // Data Memory address output dmem_cen; // Data Memory chip enable (low active) output [15:0] dmem_din; // Data Memory data input output [1:0] dmem_wen; // Data Memory write enable (low active) output [15:0] eu_mdb_in; // Execution Unit Memory data bus input output [15:0] fe_mdb_in; // Frontend Memory data bus input output fe_pmem_wait; // Frontend wait for Instruction fetch output [15:0] dma_dout; // Direct Memory Access data output output dma_ready; // Direct Memory Access is complete output dma_resp; // Direct Memory Access response (0:Okay / 1:Error) output [13:0] per_addr; // Peripheral address output [15:0] per_din; // Peripheral data input output [1:0] per_we; // Peripheral write enable (high active) output per_en; // Peripheral enable (high active) output [`PMEM_MSB:0] pmem_addr; // Program Memory address output pmem_cen; // Program Memory chip enable (low active) output [15:0] pmem_din; // Program Memory data input (optional) output [1:0] pmem_wen; // Program Memory write enable (low active) (optional) // INPUTs //========= input cpu_halt_st; // Halt/Run status from CPU input dbg_halt_cmd; // Debug interface Halt CPU command input [15:1] dbg_mem_addr; // Debug address for rd/wr access input [15:0] dbg_mem_dout; // Debug unit data output input dbg_mem_en; // Debug unit memory enable input [1:0] dbg_mem_wr; // Debug unit memory write input [15:0] dmem_dout; // Data Memory data output input [14:0] eu_mab; // Execution Unit Memory address bus input eu_mb_en; // Execution Unit Memory bus enable input [1:0] eu_mb_wr; // Execution Unit Memory bus write transfer input [15:0] eu_mdb_out; // Execution Unit Memory data bus output input [14:0] fe_mab; // Frontend Memory address bus input fe_mb_en; // Frontend Memory bus enable input mclk; // Main system clock input [15:1] dma_addr; // Direct Memory Access address input [15:0] dma_din; // Direct Memory Access data input input dma_en; // Direct Memory Access enable (high active) input dma_priority; // Direct Memory Access priority (0:low / 1:high) input [1:0] dma_we; // Direct Memory Access write byte enable (high active) input [15:0] per_dout; // Peripheral data output input [15:0] pmem_dout; // Program Memory data output input puc_rst; // Main system reset input scan_enable; // Scan enable (active during scan shifting) wire ext_mem_en; wire [15:0] ext_mem_din; wire ext_dmem_sel; wire ext_dmem_en; wire ext_pmem_sel; wire ext_pmem_en; wire ext_per_sel; wire ext_per_en; //============================================================================= // 1) DECODER //============================================================================= //------------------------------------------ // Arbiter between DMA and Debug interface //------------------------------------------ `ifdef DMA_IF_EN // Debug-interface always stops the CPU // Master interface stops the CPU in priority mode assign cpu_halt_cmd = dbg_halt_cmd | (dma_en & dma_priority); // Return ERROR response if address lays outside the memory spaces (Peripheral, Data & Program memories) assign dma_resp = ~dbg_mem_en & ~(ext_dmem_sel | ext_pmem_sel | ext_per_sel) & dma_en; // Master interface access is ready when the memory access occures assign dma_ready = ~dbg_mem_en & (ext_dmem_en | ext_pmem_en | ext_per_en | dma_resp); // Use delayed version of 'dma_ready' to mask the 'dma_dout' data output // when not accessed and reduce toggle rate (thus power consumption) reg dma_ready_dly; always @ (posedge mclk or posedge puc_rst) if (puc_rst) dma_ready_dly <= 1'b0; else dma_ready_dly <= dma_ready; // Mux between debug and master interface assign ext_mem_en = dbg_mem_en | dma_en; wire [1:0] ext_mem_wr = dbg_mem_en ? dbg_mem_wr : dma_we; wire [15:1] ext_mem_addr = dbg_mem_en ? dbg_mem_addr : dma_addr; wire [15:0] ext_mem_dout = dbg_mem_en ? dbg_mem_dout : dma_din; // External interface read data assign dbg_mem_din = ext_mem_din; assign dma_dout = ext_mem_din & {16{dma_ready_dly}}; `else // Debug-interface always stops the CPU assign cpu_halt_cmd = dbg_halt_cmd; // Master interface access is always ready with error response when excluded assign dma_resp = 1'b1; assign dma_ready = 1'b1; // Debug interface only assign ext_mem_en = dbg_mem_en; wire [1:0] ext_mem_wr = dbg_mem_wr; wire [15:1] ext_mem_addr = dbg_mem_addr; wire [15:0] ext_mem_dout = dbg_mem_dout; // External interface read data assign dbg_mem_din = ext_mem_din; assign dma_dout = 16'h0000; // LINT Cleanup wire [15:1] UNUSED_dma_addr = dma_addr; wire [15:0] UNUSED_dma_din = dma_din; wire UNUSED_dma_en = dma_en; wire UNUSED_dma_priority = dma_priority; wire [1:0] UNUSED_dma_we = dma_we; `endif //------------------------------------------ // DATA-MEMORY Interface //------------------------------------------ parameter DMEM_END = `DMEM_BASE+`DMEM_SIZE; // Execution unit access wire eu_dmem_sel = (eu_mab>=(`DMEM_BASE>>1)) & (eu_mab< ( DMEM_END >>1)); wire eu_dmem_en = eu_mb_en & eu_dmem_sel; wire [15:0] eu_dmem_addr = {1'b0, eu_mab}-(`DMEM_BASE>>1); // Front-end access // -- not allowed to execute from data memory -- // External Master/Debug interface access assign ext_dmem_sel = (ext_mem_addr[15:1]>=(`DMEM_BASE>>1)) & (ext_mem_addr[15:1]< ( DMEM_END >>1)); assign ext_dmem_en = ext_mem_en & ext_dmem_sel & ~eu_dmem_en; wire [15:0] ext_dmem_addr = {1'b0, ext_mem_addr[15:1]}-(`DMEM_BASE>>1); // Data-Memory Interface wire dmem_cen = ~(ext_dmem_en | eu_dmem_en); wire [1:0] dmem_wen = ext_dmem_en ? ~ext_mem_wr : ~eu_mb_wr; wire [`DMEM_MSB:0] dmem_addr = ext_dmem_en ? ext_dmem_addr[`DMEM_MSB:0] : eu_dmem_addr[`DMEM_MSB:0]; wire [15:0] dmem_din = ext_dmem_en ? ext_mem_dout : eu_mdb_out; //------------------------------------------ // PROGRAM-MEMORY Interface //------------------------------------------ parameter PMEM_OFFSET = (16'hFFFF-`PMEM_SIZE+1); // Execution unit access (only read access are accepted) wire eu_pmem_sel = (eu_mab>=(PMEM_OFFSET>>1)); wire eu_pmem_en = eu_mb_en & ~|eu_mb_wr & eu_pmem_sel; wire [15:0] eu_pmem_addr = eu_mab-(PMEM_OFFSET>>1); // Front-end access wire fe_pmem_sel = (fe_mab>=(PMEM_OFFSET>>1)); wire fe_pmem_en = fe_mb_en & fe_pmem_sel; wire [15:0] fe_pmem_addr = fe_mab-(PMEM_OFFSET>>1); // External Master/Debug interface access assign ext_pmem_sel = (ext_mem_addr[15:1]>=(PMEM_OFFSET>>1)); assign ext_pmem_en = ext_mem_en & ext_pmem_sel & ~eu_pmem_en & ~fe_pmem_en; wire [15:0] ext_pmem_addr = {1'b0, ext_mem_addr[15:1]}-(PMEM_OFFSET>>1); // Program-Memory Interface (Execution unit has priority over the Front-end) wire pmem_cen = ~(fe_pmem_en | eu_pmem_en | ext_pmem_en); wire [1:0] pmem_wen = ext_pmem_en ? ~ext_mem_wr : 2'b11; wire [`PMEM_MSB:0] pmem_addr = ext_pmem_en ? ext_pmem_addr[`PMEM_MSB:0] : eu_pmem_en ? eu_pmem_addr[`PMEM_MSB:0] : fe_pmem_addr[`PMEM_MSB:0]; wire [15:0] pmem_din = ext_mem_dout; wire fe_pmem_wait = (fe_pmem_en & eu_pmem_en); //------------------------------------------ // PERIPHERALS Interface //------------------------------------------ // Execution unit access wire eu_per_sel = (eu_mab<(`PER_SIZE>>1)); wire eu_per_en = eu_mb_en & eu_per_sel; // Front-end access // -- not allowed to execute from peripherals memory space -- // External Master/Debug interface access assign ext_per_sel = (ext_mem_addr[15:1]<(`PER_SIZE>>1)); assign ext_per_en = ext_mem_en & ext_per_sel & ~eu_per_en; // Peripheral Interface wire per_en = ext_per_en | eu_per_en; wire [1:0] per_we = ext_per_en ? ext_mem_wr : eu_mb_wr; wire [`PER_MSB:0] per_addr_mux = ext_per_en ? ext_mem_addr[`PER_MSB+1:1] : eu_mab[`PER_MSB:0]; wire [14:0] per_addr_ful = {{15-`PER_AWIDTH{1'b0}}, per_addr_mux}; wire [13:0] per_addr = per_addr_ful[13:0]; wire [15:0] per_din = ext_per_en ? ext_mem_dout : eu_mdb_out; // Register peripheral data read path reg [15:0] per_dout_val; always @ (posedge mclk or posedge puc_rst) if (puc_rst) per_dout_val <= 16'h0000; else per_dout_val <= per_dout; //------------------------------------------ // Frontend data Mux //------------------------------------------ // Whenever the frontend doesn't access the program memory, backup the data // Detect whenever the data should be backuped and restored reg fe_pmem_en_dly; always @(posedge mclk or posedge puc_rst) if (puc_rst) fe_pmem_en_dly <= 1'b0; else fe_pmem_en_dly <= fe_pmem_en; wire fe_pmem_save = (~fe_pmem_en & fe_pmem_en_dly) & ~cpu_halt_st; wire fe_pmem_restore = ( fe_pmem_en & ~fe_pmem_en_dly) | cpu_halt_st; `ifdef CLOCK_GATING wire mclk_bckup; omsp_clock_gate clock_gate_bckup (.gclk(mclk_bckup), .clk (mclk), .enable(fe_pmem_save), .scan_enable(scan_enable)); `else wire UNUSED_scan_enable = scan_enable; wire mclk_bckup = mclk; `endif reg [15:0] pmem_dout_bckup; always @(posedge mclk_bckup or posedge puc_rst) if (puc_rst) pmem_dout_bckup <= 16'h0000; `ifdef CLOCK_GATING else pmem_dout_bckup <= pmem_dout; `else else if (fe_pmem_save) pmem_dout_bckup <= pmem_dout; `endif // Mux between the Program memory data and the backup reg pmem_dout_bckup_sel; always @(posedge mclk or posedge puc_rst) if (puc_rst) pmem_dout_bckup_sel <= 1'b0; else if (fe_pmem_save) pmem_dout_bckup_sel <= 1'b1; else if (fe_pmem_restore) pmem_dout_bckup_sel <= 1'b0; assign fe_mdb_in = pmem_dout_bckup_sel ? pmem_dout_bckup : pmem_dout; //------------------------------------------ // Execution-Unit data Mux //------------------------------------------ // Select between Peripherals, Program and Data memories reg [1:0] eu_mdb_in_sel; always @(posedge mclk or posedge puc_rst) if (puc_rst) eu_mdb_in_sel <= 2'b00; else eu_mdb_in_sel <= {eu_pmem_en, eu_per_en}; // Mux assign eu_mdb_in = eu_mdb_in_sel[1] ? pmem_dout : eu_mdb_in_sel[0] ? per_dout_val : dmem_dout; //------------------------------------------ // External Master/Debug interface data Mux //------------------------------------------ // Select between Peripherals, Program and Data memories reg [1:0] ext_mem_din_sel; always @(posedge mclk or posedge puc_rst) if (puc_rst) ext_mem_din_sel <= 2'b00; else ext_mem_din_sel <= {ext_pmem_en, ext_per_en}; // Mux assign ext_mem_din = ext_mem_din_sel[1] ? pmem_dout : ext_mem_din_sel[0] ? per_dout_val : dmem_dout; endmodule // omsp_mem_backbone `ifdef OMSP_NO_INCLUDE `else `include "openMSP430_undefines.v" `endif
Go to most recent revision | Compare with Previous | Blame | View Log