Subversion Repositories openmsp430

!/bin/sh

rm -rf *.log

# Two-Operand Arithmetic test patterns
../bin/msp430sim two-op_mov          | tee two-op_mov.log
../bin/msp430sim two-op_mov-b        | tee two-op_mov-b.log
../bin/msp430sim two-op_add          | tee two-op_add.log
../bin/msp430sim two-op_add-b        | tee two-op_add-b.log
../bin/msp430sim two-op_addc         | tee two-op_addc.log
../bin/msp430sim two-op_sub          | tee two-op_sub.log
../bin/msp430sim two-op_subc         | tee two-op_subc.log
../bin/msp430sim two-op_cmp          | tee two-op_cmp.log
../bin/msp430sim two-op_bit          | tee two-op_bit.log
../bin/msp430sim two-op_bic          | tee two-op_bic.log
../bin/msp430sim two-op_bis          | tee two-op_bis.log
../bin/msp430sim two-op_xor          | tee two-op_xor.log
../bin/msp430sim two-op_and          | tee two-op_and.log
../bin/msp430sim two-op_dadd         | tee two-op_dadd.log

# Conditional Jump test patterns
../bin/msp430sim c-jump_jeq          | tee c-jump_jeq.log
../bin/msp430sim c-jump_jne          | tee c-jump_jne.log
../bin/msp430sim c-jump_jc           | tee c-jump_jc.log
../bin/msp430sim c-jump_jnc          | tee c-jump_jnc.log
../bin/msp430sim c-jump_jn           | tee c-jump_jn.log
../bin/msp430sim c-jump_jge          | tee c-jump_jge.log
../bin/msp430sim c-jump_jl           | tee c-jump_jl.log
../bin/msp430sim c-jump_jmp          | tee c-jump_jmp.log

# Single-Operand Arithmetic test patterns
../bin/msp430sim sing-op_rrc         | tee sing-op_rrc.log
../bin/msp430sim sing-op_rra         | tee sing-op_rra.log
../bin/msp430sim sing-op_swpb        | tee sing-op_swpb.log
../bin/msp430sim sing-op_sxt         | tee sing-op_sxt.log
../bin/msp430sim sing-op_push        | tee sing-op_push.log
../bin/msp430sim sing-op_call        | tee sing-op_call.log
../bin/msp430sim sing-op_reti        | tee sing-op_reti.log

# ROM Data Read access
../bin/msp430sim two-op_add_rom-rd   | tee two-op_add_rom-rd.log
../bin/msp430sim sing-op_push_rom-rd | tee sing-op_push_rom-rd.log
../bin/msp430sim sing-op_call_rom-rd | tee sing-op_call_rom-rd.log

# Power saving modes (CPUOFF, OSCOFF, SCG1)
../bin/msp430sim op_modes            | tee op_modes.log

# Basic clock module
../bin/msp430sim clock_module        | tee clock_module.log

# Serial Debug Interface
../bin/msp430sim dbg_uart            | tee dbg_uart.log
../bin/msp430sim dbg_cpu             | tee dbg_cpu.log
../bin/msp430sim dbg_mem             | tee dbg_mem.log
../bin/msp430sim dbg_hwbrk0          | tee dbg_hwbrk0.log
../bin/msp430sim dbg_hwbrk1          | tee dbg_hwbrk1.log
../bin/msp430sim dbg_hwbrk2          | tee dbg_hwbrk2.log
../bin/msp430sim dbg_hwbrk3          | tee dbg_hwbrk3.log

# Watchdog test patterns
../bin/msp430sim wdt_interval        | tee wdt_interval.log
../bin/msp430sim wdt_watchdog        | tee wdt_watchdog.log
../bin/msp430sim wdt_clkmux          | tee wdt_clkmux.log

# GPIO test patterns
../bin/msp430sim gpio_rdwr           | tee gpio_rdwr.log
../bin/msp430sim gpio_irq            | tee gpio_irq.log

# Peripheral templates test patterns
../bin/msp430sim template_periph_8b  | tee template_periph_8b.log
../bin/msp430sim template_periph_16b | tee template_periph_16b.log

# Timer A patterns
../bin/msp430sim tA_modes            | tee tA_modes.log
../bin/msp430sim tA_compare          | tee tA_compare.log
../bin/msp430sim tA_output           | tee tA_output.log
../bin/msp430sim tA_capture          | tee tA_capture.log
../bin/msp430sim tA_clkmux           | tee tA_clkmux.log



grep FAILED  *.log
echo ""
echo " ================================"
echo -n "| Number of passed patterns: "
cat *.log | grep -c PASSED
echo -n "| Number of failed patterns: "
cat *.log | grep -c FAILED
echo "|--------------------------------"
echo -n "| Number of patterns:        "
ls -1 *.log | wc -l
echo " ================================"
echo " Make sure passed == total"
echo ""
echo ""