URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [src/] [clock_module.v] - Rev 166
Go to most recent revision | Compare with Previous | Blame | View Log
/*===========================================================================*/ /* Copyright (C) 2001 Authors */ /* */ /* This source file may be used and distributed without restriction provided */ /* that this copyright statement is not removed from the file and that any */ /* derivative work contains the original copyright notice and the associated */ /* disclaimer. */ /* */ /* This source file is free software; you can redistribute it and/or modify */ /* it under the terms of the GNU Lesser General Public License as published */ /* by the Free Software Foundation; either version 2.1 of the License, or */ /* (at your option) any later version. */ /* */ /* This source is distributed in the hope that it will be useful, but WITHOUT*/ /* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */ /* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */ /* License for more details. */ /* */ /* You should have received a copy of the GNU Lesser General Public License */ /* along with this source; if not, write to the Free Software Foundation, */ /* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* */ /*===========================================================================*/ /* CLOCK MODULE */ /*---------------------------------------------------------------------------*/ /* Test the clock module: */ /* - Check the ACLK and SMCLK clock generation. */ /* */ /* Author(s): */ /* - Olivier Girard, olgirard@gmail.com */ /* */ /*---------------------------------------------------------------------------*/ /* $Rev: 134 $ */ /* $LastChangedBy: olivier.girard $ */ /* $LastChangedDate: 2012-03-22 21:31:06 +0100 (Thu, 22 Mar 2012) $ */ /*===========================================================================*/ `define LONG_TIMEOUT integer mclk_counter; always @ (negedge mclk) mclk_counter <= mclk_counter+1; integer aclk_counter; always @ (negedge mclk) if (aclk_en) aclk_counter <= aclk_counter+1; integer smclk_counter; always @ (negedge mclk) if (smclk_en) smclk_counter <= smclk_counter+1; reg [15:0] reg_val; initial begin $display(" ==============================================="); $display("| START SIMULATION |"); $display(" ==============================================="); repeat(5) @(posedge mclk); stimulus_done = 0; `ifdef ASIC $display(" ==============================================="); $display("| SIMULATION SKIPPED |"); $display("| (this test is not supported in ASIC mode) |"); $display(" ==============================================="); $finish; `else // ACLK GENERATION //-------------------------------------------------------- // ------- Divider /1 ---------- @(r15 === 16'h0001); @(negedge aclk_en); mclk_counter = 0; aclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: ACLK (DIV /1) ====="); if (aclk_counter !== 24) tb_error("====== CLOCK GENERATOR: ACLK (DIV /1) ====="); // ------- Divider /2 ---------- @(r15 === 16'h0002); @(negedge aclk_en); mclk_counter = 0; aclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: ACLK (DIV /2) ====="); if (aclk_counter !== 12) tb_error("====== CLOCK GENERATOR: ACLK (DIV /2) ====="); // ------- Divider /4 ---------- @(r15 === 16'h0003); @(negedge aclk_en); mclk_counter = 0; aclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: ACLK (DIV /4) ====="); if (aclk_counter !== 6) tb_error("====== CLOCK GENERATOR: ACLK (DIV /4) ====="); // ------- Divider /8 ---------- @(r15 === 16'h0004); @(negedge aclk_en); mclk_counter = 0; aclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: ACLK (DIV /8) ====="); if (aclk_counter !== 3) tb_error("====== CLOCK GENERATOR: ACLK (DIV /8) ====="); // SMCLK GENERATION - LFXT_CLK INPUT //-------------------------------------------------------- // ------- Divider /1 ---------- @(r15 === 16'h1001); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /1) ====="); if (smclk_counter !== 24) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /1) ====="); // ------- Divider /2 ---------- @(r15 === 16'h1002); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /2) ====="); if (smclk_counter !== 12) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /2) ====="); // ------- Divider /4 ---------- @(r15 === 16'h1003); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /4) ====="); if (smclk_counter !== 6) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /4) ====="); // ------- Divider /8 ---------- @(r15 === 16'h1004); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(735) @(posedge mclk); if (mclk_counter !== 735) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /8) ====="); if (smclk_counter !== 3) tb_error("====== CLOCK GENERATOR: SMCLK - LFXT_CLK INPUT (DIV /8) ====="); // SMCLK GENERATION - DCO_CLK INPUT //-------------------------------------------------------- // ------- Divider /1 ---------- @(r15 === 16'h2001); mclk_counter = 0; smclk_counter = 0; repeat(600) @(posedge mclk); if (mclk_counter !== 600) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /1) ====="); if (smclk_counter !== 600) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /1) ====="); // ------- Divider /2 ---------- @(r15 === 16'h2002); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(600) @(posedge mclk); if (mclk_counter !== 600) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /2) ====="); if (smclk_counter !== 300) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /2) ====="); // ------- Divider /4 ---------- @(r15 === 16'h2003); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(600) @(posedge mclk); if (mclk_counter !== 600) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /4) ====="); if (smclk_counter !== 150) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /4) ====="); // ------- Divider /8 ---------- @(r15 === 16'h2004); @(negedge smclk_en); mclk_counter = 0; smclk_counter = 0; repeat(600) @(posedge mclk); if (mclk_counter !== 600) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /8) ====="); if (smclk_counter !== 75) tb_error("====== CLOCK GENERATOR: SMCLK - DCO_CLK INPUT (DIV /8) ====="); // CPU ENABLE - CPU_EN INPUT //-------------------------------------------------------- @(r15 === 16'h3000); repeat(50) @(posedge mclk); if (dbg_freeze == 1'b1) tb_error("====== DBG_FREEZE signal is active (test 1) ====="); cpu_en = 1'b0; repeat(3) @(posedge mclk); reg_val = r14; // Read R14 register & initialize aclk/smclk counters aclk_counter = 0; smclk_counter = 0; repeat(3) @(posedge mclk); if (dbg_freeze !== 1'b1) tb_error("====== DBG_FREEZE signal is not active (test 2) ====="); repeat(500) @(posedge mclk); // Make sure that the CPU is stopped if (reg_val !== r14) tb_error("====== CPU is not stopped (test 3) ====="); if (aclk_counter !== 0) tb_error("====== ACLK is not stopped (test 4) ====="); if (smclk_counter !== 0) tb_error("====== SMCLK is not stopped (test 5) ====="); if (dbg_freeze !== 1'b1) tb_error("====== DBG_FREEZE signal is not active (test 6) ====="); cpu_en = 1'b1; repeat(500) @(posedge mclk); // Make sure that the CPU runs again if (reg_val == r14) tb_error("====== CPU is not running (test 7) ====="); if (aclk_counter == 0) tb_error("====== ACLK is not running (test 8) ====="); if (smclk_counter == 0) tb_error("====== SMCLK is not running (test 9) ====="); if (dbg_freeze == 1'b1) tb_error("====== DBG_FREEZE signal is active (test 10) ====="); // RD/WR ACCESS TO REGISTERS //-------------------------------------------------------- @(r15 === 16'h5000); if (r4 !== 16'h0000) tb_error("====== BCSCTL1 rd/wr access error (test 1) ====="); if (r5 !== 16'h0000) tb_error("====== BCSCTL2 rd/wr access error (test 1) ====="); if (r6 !== 16'h0030) tb_error("====== BCSCTL1 rd/wr access error (test 2) ====="); if (r7 !== 16'h0000) tb_error("====== BCSCTL2 rd/wr access error (test 2) ====="); if (r8 !== 16'h0000) tb_error("====== BCSCTL1 rd/wr access error (test 3) ====="); if (r9 !== 16'h0000) tb_error("====== BCSCTL2 rd/wr access error (test 3) ====="); if (r10 !== 16'h0000) tb_error("====== BCSCTL1 rd/wr access error (test 4) ====="); if (r11 !== 16'h000e) tb_error("====== BCSCTL2 rd/wr access error (test 4) ====="); if (r12 !== 16'h0000) tb_error("====== BCSCTL1 rd/wr access error (test 5) ====="); if (r13 !== 16'h0000) tb_error("====== BCSCTL2 rd/wr access error (test 5) ====="); `endif stimulus_done = 1; end
Go to most recent revision | Compare with Previous | Blame | View Log