URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [src/] [dbg_i2c_sync.v] - Rev 155
Go to most recent revision | Compare with Previous | Blame | View Log
/*===========================================================================*/ /* Copyright (C) 2001 Authors */ /* */ /* This source file may be used and distributed without restriction provided */ /* that this copyright statement is not removed from the file and that any */ /* derivative work contains the original copyright notice and the associated */ /* disclaimer. */ /* */ /* This source file is free software; you can redistribute it and/or modify */ /* it under the terms of the GNU Lesser General Public License as published */ /* by the Free Software Foundation; either version 2.1 of the License, or */ /* (at your option) any later version. */ /* */ /* This source is distributed in the hope that it will be useful, but WITHOUT*/ /* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */ /* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */ /* License for more details. */ /* */ /* You should have received a copy of the GNU Lesser General Public License */ /* along with this source; if not, write to the Free Software Foundation, */ /* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* */ /*===========================================================================*/ /* DEBUG INTERFACE: I2C */ /*---------------------------------------------------------------------------*/ /* Test the I2C debug interface: */ /* - Check synchronization of the serial */ /* debug interface input. */ /* */ /* Author(s): */ /* - Olivier Girard, olgirard@gmail.com */ /* */ /*---------------------------------------------------------------------------*/ /* $Rev: 95 $ */ /* $LastChangedBy: olivier.girard $ */ /* $LastChangedDate: 2011-02-24 21:37:57 +0100 (Thu, 24 Feb 2011) $ */ /*===========================================================================*/ `define VERY_LONG_TIMEOUT integer ii; reg [15:0] jj; integer kk; initial begin $display(" ==============================================="); $display("| START SIMULATION |"); $display(" ==============================================="); `ifdef DBG_EN `ifdef DBG_I2C #1 dbg_en = 1; repeat(30) @(posedge mclk); stimulus_done = 0; // Enable metastablity emulation for the SCL and SDA master path dbg_scl_master_meta = 1'b1; dbg_sda_master_out_meta = 1'b1; //-------------------------------------------------------- // TRY VARIOUS SERIAL DEBUG INTERFACE TRANSFER // WITH DIFFERENT BAUD-RATES //-------------------------------------------------------- for ( ii=0; ii < 200; ii=ii+1) begin #1 reset_n = 0; repeat(1) @(posedge mclk); #1 reset_n = 1; repeat(10) @(posedge mclk); I2C_PERIOD = 600 + 1*ii; $display("Synchronisation test for DBG_I2C_PERIOD = %5d ns / ii = %-d", I2C_PERIOD, ii); // READ CPU_ID dbg_i2c_rd(CPU_ID_LO); if (dbg_i2c_buf !== dbg_cpu_id[15:0]) begin $display("CPU_ID_LO: read = 0x%-4h / expected = 0x%-4h", dbg_i2c_buf, dbg_cpu_id[15:0]); tb_error("====== CPU_ID_LO incorrect (test 1) ====="); force_end_of_sim; end dbg_i2c_rd(CPU_ID_HI); if (dbg_i2c_buf !== dbg_cpu_id[31:16]) begin $display("CPU_ID_HI: read = 0x%-4h / expected = 0x%-4h", dbg_i2c_buf, dbg_cpu_id[31:16]); tb_error("====== CPU_ID_HI incorrect (test 1) ====="); force_end_of_sim; end //----------------------------------- // MAKE SOME READ/WRITE ACCESS //----------------------------------- for ( kk=0; kk < 10; kk=kk+1) begin jj = 'h4328; dbg_i2c_wr(MEM_DATA, 16'h5555); dbg_i2c_rd(MEM_DATA); if (dbg_i2c_buf !== 16'h5555) begin $display("DMEM_DATA: read = 0x%-4h / expected = 0x5555", dbg_i2c_buf); tb_error("====== MEM_DATA incorrect (test 1) ====="); force_end_of_sim; end jj = 'h3280; dbg_i2c_wr(MEM_DATA, 16'haaaa); dbg_i2c_rd(MEM_DATA); if (dbg_i2c_buf !== 16'haaaa) begin $display("DMEM_DATA: read = 0x%-4h / expected = 0xaaaa", dbg_i2c_buf); tb_error("====== MEM_DATA incorrect (test 2) ====="); force_end_of_sim; end end end //-------------------------------------------------------- // END OF TEST //-------------------------------------------------------- #1 reset_n = 0; repeat(1) @(posedge mclk); #1 reset_n = 1; repeat(10) @(posedge mclk); I2C_PERIOD = 600; $display("Synchronisation test for DBG_I2C_PERIOD = %5d ns / ii = %-d", I2C_PERIOD, ii); // Let the CPU run dbg_i2c_wr(CPU_CTL, 16'h0002); // Generate an IRQ wkup[0] = 1'b1; @(negedge mclk); irq[0] = 1'b1; @(negedge irq_acc[0]) @(negedge mclk); wkup[0] = 1'b0; irq[0] = 1'b0; repeat(10) @(posedge mclk); stimulus_done = 1; `else $display(" ==============================================="); $display("| SIMULATION SKIPPED |"); $display("| (serial debug interface I2C not included) |"); $display(" ==============================================="); $finish; `endif `else $display(" ==============================================="); $display("| SIMULATION SKIPPED |"); $display("| (serial debug interface not included) |"); $display(" ==============================================="); $finish; `endif end task force_end_of_sim; begin repeat(10) @(posedge mclk); $display(" ==============================================="); $display("| SIMULATION FAILED |"); $display("| (some verilog stimulus checks failed) |"); $display(" ==============================================="); $finish; end endtask
Go to most recent revision | Compare with Previous | Blame | View Log