URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [src/] [lp_modes_dbg_asic.v] - Rev 162
Go to most recent revision | Compare with Previous | Blame | View Log
/*===========================================================================*/ /* Copyright (C) 2001 Authors */ /* */ /* This source file may be used and distributed without restriction provided */ /* that this copyright statement is not removed from the file and that any */ /* derivative work contains the original copyright notice and the associated */ /* disclaimer. */ /* */ /* This source file is free software; you can redistribute it and/or modify */ /* it under the terms of the GNU Lesser General Public License as published */ /* by the Free Software Foundation; either version 2.1 of the License, or */ /* (at your option) any later version. */ /* */ /* This source is distributed in the hope that it will be useful, but WITHOUT*/ /* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */ /* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */ /* License for more details. */ /* */ /* You should have received a copy of the GNU Lesser General Public License */ /* along with this source; if not, write to the Free Software Foundation, */ /* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* */ /*===========================================================================*/ /* CPU LOW POWER MODES */ /*---------------------------------------------------------------------------*/ /* Test the CPU Low Power modes: */ /* - LPM0 <=> CPUOFF */ /* - LPM1 <=> CPUOFF + SCG0 */ /* - LPM2 <=> CPUOFF + SCG1 */ /* - LPM3 <=> CPUOFF + SCG0 + SCG1 */ /* - LPM4 <=> CPUOFF + SCG0 + SCG1 + OSCOFF */ /* */ /* Reminder: */ /* - CPUOFF <=> turns off CPU. */ /* - SCG0 <=> turns off DCO. */ /* - SCG1 <=> turns off SMCLK. */ /* - OSCOFF <=> turns off LFXT_CLK. */ /* */ /* Author(s): */ /* - Olivier Girard, olgirard@gmail.com */ /* */ /*---------------------------------------------------------------------------*/ /* $Rev: 95 $ */ /* $LastChangedBy: olivier.girard $ */ /* $LastChangedDate: 2011-02-24 21:37:57 +0100 (Thu, 24 Feb 2011) $ */ /*===========================================================================*/ integer dco_clk_cnt; always @(negedge dco_clk) dco_clk_cnt <= dco_clk_cnt+1; integer mclk_cnt; always @(negedge mclk) mclk_cnt <= mclk_cnt+1; integer smclk_cnt; always @(negedge smclk) smclk_cnt <= smclk_cnt+1; integer aclk_cnt; always @(negedge aclk) aclk_cnt <= aclk_cnt+1; integer inst_cnt; always @(inst_number) inst_cnt = inst_cnt+1; // Wakeup synchronizer to generate IRQ reg [1:0] wkup2_sync; always @(posedge mclk or posedge puc_rst) if (puc_rst) wkup2_sync <= 2'b00; else wkup2_sync <= {wkup2_sync[0], wkup[2]}; always @(wkup2_sync) irq[2] = wkup2_sync[1]; // Wakeup synchronizer to generate IRQ reg [1:0] wkup3_sync; always @(posedge mclk or posedge puc_rst) if (puc_rst) wkup3_sync <= 2'b00; else wkup3_sync <= {wkup3_sync[0], wkup[3]}; always @(wkup3_sync) irq[3] = wkup3_sync[1]; initial begin $display(" ==============================================="); $display("| START SIMULATION |"); $display(" ==============================================="); @(negedge puc_rst); repeat(5) @(posedge mclk); stimulus_done = 0; // Enable debug interface dbg_en = 1; irq[2] = 0; wkup[2] = 0; irq[3] = 0; wkup[3] = 0; //$display("dco_clk_cnt: %d / mclk_cnt: %d / smclk_cnt: %d / aclk_cnt: %d / inst_cnt: %d ", dco_clk_cnt, mclk_cnt, smclk_cnt, aclk_cnt, inst_cnt); `ifdef ASIC // ACTIVE //-------------------------------------------------------- @(r15==16'h1001); #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== ACTIVE TEST 1: DCO_CLK IS NOT RUNNING ====="); if (mclk_cnt !== 100) tb_error("====== ACTIVE TEST 2: MCLK IS NOT RUNNING ====="); if (smclk_cnt !== 100) tb_error("====== ACTIVE TEST 3: SMCLK IS NOT RUNNING ====="); if (aclk_cnt < 3) tb_error("====== ACTIVE TEST 4: ACLK IS NOT RUNNING ====="); if (inst_cnt < 60) tb_error("====== ACTIVE TEST 5: CPU IS NOT EXECUTING ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; // LPM0 ( CPUOFF ) //-------------------------------------------------------- @(r15==16'h2001); #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM0 TEST 1: DCO_CLK IS NOT RUNNING ====="); if (mclk_cnt !== 100) tb_error("====== LPM0 TEST 2: MCLK IS NOT RUNNING ====="); if (smclk_cnt !== 100) tb_error("====== LPM0 TEST 3: SMCLK IS NOT RUNNING ====="); if (aclk_cnt < 3) tb_error("====== LPM0 TEST 4: ACLK IS NOT RUNNING ====="); if (inst_cnt !== 0) tb_error("====== LPM0 TEST 5: CPU IS EXECUTING ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; @(posedge dco_clk); //---------- PORT1 IRQ TRIAL (STAYING IN POWER MODE) -------------// wkup[2] = 1'b1; @(posedge irq_acc[2]); #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM0 TEST 6: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM0 TEST 7: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt !== 100) tb_error("====== LPM0 TEST 8: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM0 TEST 9: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM0 TEST 10: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'haaaa); wkup[2] = 1'b0; #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM0 TEST 11: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM0 TEST 12: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt !== 100) tb_error("====== LPM0 TEST 13: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM0 TEST 14: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt !== 0) tb_error("====== LPM0 TEST 15: CPU IS EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; //---------- PORT2 IRQ TRIAL (EXITING POWER MODE) -------------// wkup[3] = 1'b1; @(posedge irq_acc[3]); #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM0 TEST 16: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM0 TEST 17: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt !== 100) tb_error("====== LPM0 TEST 18: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM0 TEST 19: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM0 TEST 20: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'hbbbb); wkup[3] = 1'b0; #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM0 TEST 21: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM0 TEST 22: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt !== 100) tb_error("====== LPM0 TEST 23: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM0 TEST 24: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM0 TEST 25: CPU IS NOT EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; // LPM1 ( CPUOFF + SCG0 ) //-------------------------------------------------------- @(r15==16'h3001); // Until the SMCLK clock mux is implemented, force SMCLK to LFXT_CLK; force dut.clock_module_0.nodiv_smclk = lfxt_clk; //force dut.clock_module_0.smclk = lfxt_clk; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM1 TEST 1: DCO_CLK IS NOT RUNNING ====="); if (mclk_cnt !== 100) tb_error("====== LPM1 TEST 2: MCLK IS NOT RUNNING ====="); if (smclk_cnt < 3) tb_error("====== LPM1 TEST 3: SMCLK IS NOT RUNNING ====="); if (aclk_cnt < 3) tb_error("====== LPM1 TEST 4: ACLK IS NOT RUNNING ====="); if (inst_cnt !== 0) tb_error("====== LPM1 TEST 5: CPU IS EXECUTING ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(1*50); //---------- PORT1 IRQ TRIAL (STAYING IN POWER MODE) -------------// wkup[2] = 1'b1; @(posedge irq_acc[2]); #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM1 TEST 6: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM1 TEST 7: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM1 TEST 8: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM1 TEST 9: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM1 TEST 10: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'haaaa); wkup[2] = 1'b0; #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM1 TEST 11: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM1 TEST 12: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM1 TEST 13: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM1 TEST 14: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt !== 0) tb_error("====== LPM1 TEST 15: CPU IS EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; //---------- PORT2 IRQ TRIAL (EXITING POWER MODE) -------------// wkup[3] = 1'b1; @(posedge irq_acc[3]); #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM1 TEST 16: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM1 TEST 17: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt !== 4) tb_error("====== LPM1 TEST 18: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM1 TEST 19: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM1 TEST 20: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'hbbbb); wkup[3] = 1'b0; #(10*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM1 TEST 21: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM1 TEST 22: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM1 TEST 23: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM1 TEST 24: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM1 TEST 25: CPU IS NOT EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; // LPM2 ( CPUOFF + SCG1 ) //-------------------------------------------------------- @(r15==16'h4001); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM2 TEST 1: DCO_CLK IS NOT RUNNING ====="); if (mclk_cnt !== 100) tb_error("====== LPM2 TEST 2: MCLK IS NOT RUNNING ====="); `ifdef SCG1_EN if (smclk_cnt !== 0) tb_error("====== LPM2 TEST 3: SMCLK IS RUNNING ====="); `else if (smclk_cnt < 3) tb_error("====== LPM2 TEST 3: SMCLK IS NOT RUNNING ====="); `endif if (aclk_cnt < 3) tb_error("====== LPM2 TEST 4: ACLK IS NOT RUNNING ====="); if (inst_cnt !== 0) tb_error("====== LPM2 TEST 5: CPU IS EXECUTING ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(1*50); //---------- PORT1 IRQ TRIAL (STAYING IN POWER MODE) -------------// wkup[2] = 1'b1; @(posedge irq_acc[2]); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM2 TEST 6: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM2 TEST 7: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM2 TEST 8: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM2 TEST 9: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM2 TEST 10: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'haaaa); wkup[2] = 1'b0; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM2 TEST 11: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM2 TEST 12: MCLK IS NOT RUNNING AFTER IRQ ====="); `ifdef SCG1_EN if (smclk_cnt !== 0) tb_error("====== LPM2 TEST 13: SMCLK IS RUNNING ====="); `else if (smclk_cnt < 3) tb_error("====== LPM2 TEST 13: SMCLK IS NOT RUNNING ====="); `endif if (aclk_cnt < 3) tb_error("====== LPM2 TEST 14: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt !== 0) tb_error("====== LPM2 TEST 15: CPU IS EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; //---------- PORT2 IRQ TRIAL (EXITING POWER MODE) -------------// wkup[3] = 1'b1; @(posedge irq_acc[3]); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM2 TEST 16: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM2 TEST 17: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM2 TEST 18: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM2 TEST 19: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM2 TEST 20: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'hbbbb); wkup[3] = 1'b0; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM2 TEST 21: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM2 TEST 22: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM2 TEST 23: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM2 TEST 24: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM2 TEST 25: CPU IS NOT EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; // LPM3 ( CPUOFF + SCG0 + SCG1 ) //-------------------------------------------------------- @(r15==16'h5001); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM3 TEST 1: DCO_CLK IS NOT RUNNING ====="); if (mclk_cnt !== 100) tb_error("====== LPM3 TEST 2: MCLK IS NOT RUNNING ====="); `ifdef SCG1_EN if (smclk_cnt !== 0) tb_error("====== LPM3 TEST 3: SMCLK IS RUNNING ====="); `else if (smclk_cnt < 3) tb_error("====== LPM3 TEST 3: SMCLK IS NOT RUNNING ====="); `endif if (aclk_cnt < 3) tb_error("====== LPM3 TEST 4: ACLK IS NOT RUNNING ====="); if (inst_cnt !== 0) tb_error("====== LPM3 TEST 5: CPU IS EXECUTING ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(1*50); //---------- PORT1 IRQ TRIAL (STAYING IN POWER MODE) -------------// wkup[2] = 1'b1; @(posedge irq_acc[2]); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM3 TEST 6: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM3 TEST 7: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM3 TEST 8: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM3 TEST 9: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM3 TEST 10: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'haaaa); wkup[2] = 1'b0; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM3 TEST 11: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM3 TEST 12: MCLK IS NOT RUNNING AFTER IRQ ====="); `ifdef SCG1_EN if (smclk_cnt !== 0) tb_error("====== LPM3 TEST 13: SMCLK IS RUNNING AFTER IRQ ====="); `else if (smclk_cnt < 3) tb_error("====== LPM3 TEST 13: SMCLK IS NOT RUNNING AFTER IRQ ====="); `endif if (aclk_cnt < 3) tb_error("====== LPM3 TEST 14: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt !== 0) tb_error("====== LPM3 TEST 15: CPU IS EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; //---------- PORT2 IRQ TRIAL (EXITING POWER MODE) -------------// wkup[3] = 1'b1; @(posedge irq_acc[3]); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM3 TEST 16: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM3 TEST 17: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM3 TEST 18: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM3 TEST 19: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM3 TEST 20: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'hbbbb); wkup[3] = 1'b0; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM3 TEST 21: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM3 TEST 22: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM3 TEST 23: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM3 TEST 24: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM3 TEST 25: CPU IS NOT EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; // LPM4 ( CPUOFF + SCG0 + SCG1 + OSCOFF) //-------------------------------------------------------- @(r15==16'h6001); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM4 TEST 1: DCO_CLK IS NOT RUNNING ====="); if (mclk_cnt !== 100) tb_error("====== LPM4 TEST 2: MCLK IS NOT RUNNING ====="); `ifdef SCG1_EN if (smclk_cnt !== 0) tb_error("====== LPM4 TEST 3: SMCLK IS RUNNING ====="); `else if (smclk_cnt < 3) tb_error("====== LPM4 TEST 3: SMCLK IS NOT RUNNING ====="); `endif `ifdef ACLK_DIVIDER `ifdef OSCOFF_EN if (aclk_cnt !== 0) tb_error("====== LPM4 TEST 4: ACLK IS RUNNING ====="); `else if (aclk_cnt < 3) tb_error("====== LPM4 TEST 4: ACLK IS NOT RUNNING ====="); `endif `else if (aclk_cnt < 3) tb_error("====== LPM4 TEST 4: ACLK IS NOT RUNNING ====="); `endif if (inst_cnt !== 0) tb_error("====== LPM4 TEST 5: CPU IS EXECUTING ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(1*50); //---------- PORT1 IRQ TRIAL (STAYING IN POWER MODE) -------------// wkup[2] = 1'b1; @(posedge irq_acc[2]); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM4 TEST 6: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM4 TEST 7: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM4 TEST 8: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM4 TEST 9: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM4 TEST 10: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'haaaa); wkup[2] = 1'b0; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM4 TEST 11: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM4 TEST 12: MCLK IS NOT RUNNING AFTER IRQ ====="); `ifdef SCG1_EN if (smclk_cnt !== 0) tb_error("====== LPM4 TEST 13: SMCLK IS RUNNING AFTER IRQ ====="); `else if (smclk_cnt < 3) tb_error("====== LPM4 TEST 13: SMCLK IS NOT RUNNING AFTER IRQ ====="); `endif `ifdef ACLK_DIVIDER `ifdef OSCOFF_EN if (aclk_cnt !== 0) tb_error("====== LPM4 TEST 14: ACLK IS RUNNING AFTER IRQ ====="); `else if (aclk_cnt < 3) tb_error("====== LPM4 TEST 14: ACLK IS NOT RUNNING AFTER IRQ ====="); `endif `else if (aclk_cnt < 3) tb_error("====== LPM4 TEST 14: ACLK IS NOT RUNNING AFTER IRQ ====="); `endif if (inst_cnt !== 0) tb_error("====== LPM4 TEST 15: CPU IS EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; //---------- PORT2 IRQ TRIAL (EXITING POWER MODE) -------------// wkup[3] = 1'b1; @(posedge irq_acc[3]); #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM4 TEST 16: DCO_CLK IS NOT RUNNING DURING IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM4 TEST 17: MCLK IS NOT RUNNING DURING IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM4 TEST 18: SMCLK IS NOT RUNNING DURING IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM4 TEST 19: ACLK IS NOT RUNNING DURING IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM4 TEST 20: CPU IS NOT EXECUTING DURING IRQ ====="); @(r13==16'hbbbb); wkup[3] = 1'b0; #(100*50); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; #(100*50); if (dco_clk_cnt !== 100) tb_error("====== LPM4 TEST 21: DCO_CLK IS NOT RUNNING AFTER IRQ ====="); if (mclk_cnt !== 100) tb_error("====== LPM4 TEST 22: MCLK IS NOT RUNNING AFTER IRQ ====="); if (smclk_cnt < 3) tb_error("====== LPM4 TEST 23: SMCLK IS NOT RUNNING AFTER IRQ ====="); if (aclk_cnt < 3) tb_error("====== LPM4 TEST 24: ACLK IS NOT RUNNING AFTER IRQ ====="); if (inst_cnt < 60) tb_error("====== LPM4 TEST 25: CPU IS NOT EXECUTING AFTER IRQ ====="); dco_clk_cnt = 0; mclk_cnt = 0; smclk_cnt = 0; aclk_cnt = 0; inst_cnt = 0; `else $display(" ==============================================="); $display("| SIMULATION SKIPPED |"); $display("| (this test is not supported in FPGA mode) |"); $display(" ==============================================="); $finish; `endif stimulus_done = 1; end
Go to most recent revision | Compare with Previous | Blame | View Log