URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [src/] [mpy_macs.v] - Rev 222
Go to most recent revision | Compare with Previous | Blame | View Log
/*===========================================================================*/ /* Copyright (C) 2001 Authors */ /* */ /* This source file may be used and distributed without restriction provided */ /* that this copyright statement is not removed from the file and that any */ /* derivative work contains the original copyright notice and the associated */ /* disclaimer. */ /* */ /* This source file is free software; you can redistribute it and/or modify */ /* it under the terms of the GNU Lesser General Public License as published */ /* by the Free Software Foundation; either version 2.1 of the License, or */ /* (at your option) any later version. */ /* */ /* This source is distributed in the hope that it will be useful, but WITHOUT*/ /* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */ /* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */ /* License for more details. */ /* */ /* You should have received a copy of the GNU Lesser General Public License */ /* along with this source; if not, write to the Free Software Foundation, */ /* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* */ /*===========================================================================*/ /* HARDWARE MULTIPLIER */ /*---------------------------------------------------------------------------*/ /* Test the hardware multiplier: */ /* - MACS mode. */ /* */ /* Author(s): */ /* - Olivier Girard, olgirard@gmail.com */ /* */ /*---------------------------------------------------------------------------*/ /* $Rev: 18 $ */ /* $LastChangedBy: olivier.girard $ */ /* $LastChangedDate: 2009-08-04 23:44:12 +0200 (Tue, 04 Aug 2009) $ */ /*===========================================================================*/ `define NO_TIMEOUT integer i; reg signed [31:0] result; wire signed [15:0] r8_s = r8; wire signed [15:0] r9_s = r9; initial begin $display(" ==============================================="); $display("| START SIMULATION |"); $display(" ==============================================="); `ifdef MULTIPLIER repeat(5) @(posedge mclk); stimulus_done = 0; i = 0; for ( i=0; i < 'h10000; i=i+1) begin @(r15); result = r8_s*r9_s; result = 32'hC000_0000 + result; if (r10 !== result[15:0]) begin $display("ERROR: OP1 = 0x%h / OP2 = 0x%h", r8, r9); $display("ERROR: Result is: SUMEXT = 0x%h / RESHI = 0x%h / RESLO = 0x%h", r12, r11, r10); $display("ERROR: Expected : SUMEXT = 0x%h / RESHI = 0x%h / RESLO = 0x%h", {16{result[31]}}, result[31:16], result[15:0]); tb_error("====== SIGNED MULTIPLY ACCUMULATE: RESLO ====="); end if (r11 !== result[31:16]) begin $display("ERROR: OP1 = 0x%h / OP2 = 0x%h", r8, r9); $display("ERROR: Result is: SUMEXT = 0x%h / RESHI = 0x%h / RESLO = 0x%h", r12, r11, r10); $display("ERROR: Expected : SUMEXT = 0x%h / RESHI = 0x%h / RESLO = 0x%h", {16{result[31]}}, result[31:16], result[15:0]); tb_error("====== SIGNED MULTIPLY ACCUMULATE: RESHI ====="); end if (r12 !== {16{result[31]}}) begin $display("ERROR: OP1 = 0x%h / OP2 = 0x%h", r8, r9); $display("ERROR: Result is: SUMEXT = 0x%h / RESHI = 0x%h / RESLO = 0x%h", r12, r11, r10); $display("ERROR: Expected : SUMEXT = 0x%h / RESHI = 0x%h / RESLO = 0x%h", {16{result[31]}}, result[31:16], result[15:0]); tb_error("====== SIGNED MULTIPLY ACCUMULATE: SUMEXT ====="); end if (r15[7:0]==8'h00) $display("OP2 = 0x%h done", r9); end stimulus_done = 1; `else tb_skip_finish("| (hardware multiplier not included) |"); `endif end
Go to most recent revision | Compare with Previous | Blame | View Log