URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [src/] [nmi.s43] - Rev 155
Go to most recent revision | Compare with Previous | Blame | View Log
/*===========================================================================*/
/* Copyright (C) 2001 Authors */
/* */
/* This source file may be used and distributed without restriction provided */
/* that this copyright statement is not removed from the file and that any */
/* derivative work contains the original copyright notice and the associated */
/* disclaimer. */
/* */
/* This source file is free software; you can redistribute it and/or modify */
/* it under the terms of the GNU Lesser General Public License as published */
/* by the Free Software Foundation; either version 2.1 of the License, or */
/* (at your option) any later version. */
/* */
/* This source is distributed in the hope that it will be useful, but WITHOUT*/
/* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */
/* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */
/* License for more details. */
/* */
/* You should have received a copy of the GNU Lesser General Public License */
/* along with this source; if not, write to the Free Software Foundation, */
/* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
/* */
/*===========================================================================*/
/* SINGLE-OPERAND ARITHMETIC: CALL INSTRUCTION */
/*---------------------------------------------------------------------------*/
/* Test the CALL instruction. */
/* */
/* Author(s): */
/* - Olivier Girard, olgirard@gmail.com */
/* */
/*---------------------------------------------------------------------------*/
/* $Rev: 19 $ */
/* $LastChangedBy: olivier.girard $ */
/* $LastChangedDate: 2009-08-04 23:47:15 +0200 (Tue, 04 Aug 2009) $ */
/*===========================================================================*/
.include "pmem_defs.asm"
.global main
.macro LPM4
bis #0x00F0, r2
.endm
.macro LPM4_exit
bic #0x00F0, @r1
.endm
main:
mov #DMEM_250, r1 ;# Initialize stack & Enable interrupts
eint
mov #0x0000, r6 ;# R6 will be incremented with every NMI serviced interrupts
mov #0x0000, r7 ;# Save Status register in NMI service routine
mov #0x0000, r8 ;# Save Stack register in NMI service routine
;# Test NMI disabled
;#-----------------------
mov #0x1000, r15
mov.b &IFG1, r14 ;# Check reset value
mov #0x1001, r15
LPM4
mov #0x0100, r9 ;# Wait a while while .v stimulus plays with NMI pin
wait_loop_nmi_dis:
dec r9
jnz wait_loop_nmi_dis
mov.b &IFG1, r13 ;# Check the flag
bic.b #0x10, &IFG1
mov.b &IFG1, r12
nop
nop
nop
nop
mov.b &IFG1, r11 ;# Wait a while and re-check the flag
mov #0x1002, r15
;# Test NMI rising edge
;#-----------------------
mov #0x2000, r15
mov #0x5a00, &WDTCTL ; NMI Edge selection: rising
bic.b #0x10, &IFG1 ; Clear NMI flag
bis.b #0x10, &IE1 ; Enable NMI
mov #0x2001, r15
LPM4
mov #0x0100, r9 ;# Wait a while
wait_loop_nmi_re:
dec r9
jnz wait_loop_nmi_re
;# Test NMI falling edge
;#-----------------------
mov #0x3000, r15
bic.b #0x10, &IE1 ; Disable NMI
mov #0x5a40, &WDTCTL ; NMI Edge selection: falling
bic.b #0x10, &IFG1 ; Clear NMI flag
bis.b #0x10, &IE1 ; Enable NMI
mov #0x0000, r6
mov #0x3001, r15
LPM4
mov #0x0100, r9 ;# Wait a while
wait_loop_nmi_fe:
dec r9
jnz wait_loop_nmi_fe
;# Test NMI nested in maskable IRQ
;#---------------------------------
mov #0x4000, r15
bic.b #0x10, &IE1 ; Disable NMI
mov #0x5a00, &WDTCTL ; NMI Edge selection: rising
bic.b #0x10, &IFG1 ; Clear NMI flag
bis.b #0x10, &IE1 ; Enable NMI
mov #0x0000, r6
mov #0x4001, r15
LPM4
mov #0x0100, r9 ;# Wait a while
wait_loop_nmi_nested:
dec r9
jnz wait_loop_nmi_nested
mov #0x4002, r15
/* ---------------------- END OF TEST --------------- */
end_of_test:
nop
br #0xffff
/* ---------------------- FUNCTIONS --------------- */
IRQ00_ROUTINE:
mov #0x5678, r10
add r6, r10 ; If NMI was taken before, 1 will be added to R10
LPM4_exit
reti
NMI_ROUTINE:
mov #0x1234, r10
inc r6 ; Increment R6
cmp #2, r6
jl end_of_nmi
LPM4_exit
end_of_nmi:
mov r2, r7 ; Save Status register
mov r1, r8 ; Save Stack register
bic.b #0x10, &IFG1 ; Clear NMI flag
bis.b #0x10, &IE1 ; Enable NMI
reti
/* ---------------------- INTERRUPT VECTORS --------------- */
.section .vectors, "a"
.word IRQ00_ROUTINE ; Interrupt 0 (lowest priority) <unused>
.word end_of_test ; Interrupt 1 <unused>
.word end_of_test ; Interrupt 2 <unused>
.word end_of_test ; Interrupt 3 <unused>
.word end_of_test ; Interrupt 4 <unused>
.word end_of_test ; Interrupt 5 <unused>
.word end_of_test ; Interrupt 6 <unused>
.word end_of_test ; Interrupt 7 <unused>
.word end_of_test ; Interrupt 8 <unused>
.word end_of_test ; Interrupt 9 <unused>
.word end_of_test ; Interrupt 10 Watchdog timer
.word end_of_test ; Interrupt 11 <unused>
.word end_of_test ; Interrupt 12 <unused>
.word end_of_test ; Interrupt 13 <unused>
.word NMI_ROUTINE ; Interrupt 14 NMI
.word main ; Interrupt 15 (highest priority) RESET
Go to most recent revision | Compare with Previous | Blame | View Log