Subversion Repositories openmsp430

//----------------------------------------------------------------------------
// Copyright (C) 2001 Authors
//
// This source file may be used and distributed without restriction provided
// that this copyright statement is not removed from the file and that any
// derivative work contains the original copyright notice and the associated
// disclaimer.
//
// This source file is free software; you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published
// by the Free Software Foundation; either version 2.1 of the License, or
// (at your option) any later version.
//
// This source is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
// License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this source; if not, write to the Free Software Foundation,
// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
//
//----------------------------------------------------------------------------
//
// *File Name: omsp_dbg_uart.v
// 
// *Module Description:
//                       Debug UART communication interface (8N1, Half-duplex)
//
// *Author(s):
//              - Olivier Girard,    olgirard@gmail.com
//
//----------------------------------------------------------------------------
// $Rev: 34 $
// $LastChangedBy: olivier.girard $
// $LastChangedDate: 2009-12-29 20:10:34 +0100 (Di, 29 Dez 2009) $
//----------------------------------------------------------------------------
`include "timescale.v"
`include "openMSP430_defines.v"
 
module  omsp_dbg_uart (
 
// OUTPUTs
    dbg_addr,                       // Debug register address
    dbg_din,                        // Debug register data input
    dbg_rd,                         // Debug register data read
    dbg_uart_txd,                   // Debug interface: UART TXD
    dbg_wr,                         // Debug register data write
 
// INPUTs
    dbg_dout,                       // Debug register data output
    dbg_rd_rdy,                     // Debug register data is ready for read
    dbg_uart_rxd,                   // Debug interface: UART RXD
    mclk,                           // Main system clock
    mem_burst,                      // Burst on going
    mem_burst_end,                  // End TX/RX burst
    mem_burst_rd,                   // Start TX burst
    mem_burst_wr,                   // Start RX burst
    mem_bw,                         // Burst byte width
    por                             // Power on reset
);
 
// OUTPUTs
//=========
output        [5:0] dbg_addr;       // Debug register address
output       [15:0] dbg_din;        // Debug register data input
output              dbg_rd;         // Debug register data read
output              dbg_uart_txd;   // Debug interface: UART TXD
output              dbg_wr;         // Debug register data write
 
// INPUTs
//=========
input        [15:0] dbg_dout;       // Debug register data output
input               dbg_rd_rdy;     // Debug register data is ready for read
input               dbg_uart_rxd;   // Debug interface: UART RXD
input               mclk;           // Main system clock
input               mem_burst;      // Burst on going
input               mem_burst_end;  // End TX/RX burst
input               mem_burst_rd;   // Start TX burst
input               mem_burst_wr;   // Start RX burst
input               mem_bw;         // Burst byte width
input               por;            // Power on reset
 
 
//=============================================================================
// 1)  UART RECEIVE LINE SYNCHRONIZTION & FILTERING
//=============================================================================
 
// Synchronize RXD input & buffer
//--------------------------------
reg  [3:0] rxd_sync;
always @ (posedge mclk or posedge por)
  if (por) rxd_sync <=  4'h0;
  else     rxd_sync <=  {rxd_sync[2:0], dbg_uart_rxd};
 
// Majority decision
//------------------------
reg        rxd_maj;
 
wire [1:0] rxd_maj_cnt = {1'b0, rxd_sync[1]} +
                         {1'b0, rxd_sync[2]} +
                         {1'b0, rxd_sync[3]};
wire       rxd_maj_nxt = (rxd_maj_cnt>=2'b10);
 
always @ (posedge mclk or posedge por)
  if (por) rxd_maj <=  1'b0;
  else     rxd_maj <=  rxd_maj_nxt;
 
wire rxd_s  =  rxd_maj;
wire rxd_fe =  rxd_maj & ~rxd_maj_nxt;
wire rxd_re = ~rxd_maj &  rxd_maj_nxt;
 
 
//=============================================================================
// 2)  UART STATE MACHINE
//=============================================================================
 
// Receive state
//------------------------
reg  [2:0] uart_state;
reg  [2:0] uart_state_nxt;
 
wire       sync_done;
wire       xfer_done;
reg [19:0] xfer_buf;
 
// State machine definition
parameter  RX_SYNC  = 3'h0;
parameter  RX_CMD   = 3'h1;
parameter  RX_DATA1 = 3'h2;
parameter  RX_DATA2 = 3'h3;
parameter  TX_DATA1 = 3'h4;
parameter  TX_DATA2 = 3'h5;
 
// State transition
always @(uart_state or xfer_buf or mem_burst or mem_burst_wr or mem_burst_rd or mem_burst_end or mem_bw)
  case (uart_state)
    RX_SYNC  : uart_state_nxt =  RX_CMD;
    RX_CMD   : uart_state_nxt =  mem_burst_wr                ?
                                (mem_bw                      ? RX_DATA2 : RX_DATA1) :
                                 mem_burst_rd                ?
                                (mem_bw                      ? TX_DATA2 : TX_DATA1) :
                                (xfer_buf[`DBG_UART_WR]      ?
                                (xfer_buf[`DBG_UART_BW]      ? RX_DATA2 : RX_DATA1) :
                                (xfer_buf[`DBG_UART_BW]      ? TX_DATA2 : TX_DATA1));
    RX_DATA1 : uart_state_nxt =  RX_DATA2;
    RX_DATA2 : uart_state_nxt = (mem_burst & ~mem_burst_end) ?
                                (mem_bw                      ? RX_DATA2 : RX_DATA1) :
                                 RX_CMD;
    TX_DATA1 : uart_state_nxt =  TX_DATA2;
    TX_DATA2 : uart_state_nxt = (mem_burst & ~mem_burst_end) ?
                                (mem_bw                      ? TX_DATA2 : TX_DATA1) :
                                 RX_CMD;
    default  : uart_state_nxt =  RX_CMD;
  endcase
 
// State machine
always @(posedge mclk or posedge por)
  if (por)                              uart_state <= RX_SYNC;
  else if (xfer_done    | sync_done |
           mem_burst_wr | mem_burst_rd) uart_state <= uart_state_nxt;
 
// Utility signals
wire cmd_valid = (uart_state==RX_CMD) & xfer_done;
wire tx_active = (uart_state==TX_DATA1) | (uart_state==TX_DATA2);
 
 
//=============================================================================
// 3)  UART SYNCHRONIZATION
//=============================================================================
// After POR, the host needs to fist send a synchronization character (0x80)
// If this feature doesn't work properly, it is possible to disable it by
// commenting the DBG_UART_AUTO_SYNC define in the openMSP430.inc file.
 
reg        sync_busy;
always @ (posedge mclk or posedge por)
  if (por)                                 sync_busy <=  1'b0;
  else if ((uart_state==RX_SYNC) & rxd_fe) sync_busy <=  1'b1;
  else if ((uart_state==RX_SYNC) & rxd_re) sync_busy <=  1'b0;
 
assign sync_done =  (uart_state==RX_SYNC) & rxd_re & sync_busy;
 
`ifdef DBG_UART_AUTO_SYNC
 
reg [14:0] sync_cnt;
always @ (posedge mclk or posedge por)
  if (por)            sync_cnt <=  15'h7ff8;
  else if (sync_busy) sync_cnt <=  sync_cnt+15'h0001;
 
wire [11:0] bit_cnt_max = sync_cnt[14:3];
`else
wire [11:0] bit_cnt_max = `DBG_UART_CNT;
`endif
 
 
//=============================================================================
// 4)  UART RECEIVE / TRANSMIT
//=============================================================================
 
// Transfer counter
//------------------------
reg  [3:0] xfer_bit;
reg [11:0] xfer_cnt;
 
wire       txd_start    = dbg_rd_rdy | (xfer_done & (uart_state==TX_DATA1));
wire       rxd_start    = (xfer_bit==4'h0) & rxd_fe & ((uart_state!=RX_SYNC));
wire       xfer_bit_inc = (xfer_bit!=4'h0) & (xfer_cnt==12'h000);
assign     xfer_done    = (xfer_bit==4'hb);
 
always @ (posedge mclk or posedge por)
  if (por)                           xfer_bit <=  4'h0;
  else if (txd_start | rxd_start)    xfer_bit <=  4'h1;
  else if (xfer_done)                xfer_bit <=  4'h0;
  else if (xfer_bit_inc)             xfer_bit <=  xfer_bit+4'h1;
 
always @ (posedge mclk or posedge por)
  if (por)                           xfer_cnt <=  12'h000;
  else if (rxd_start)                xfer_cnt <=  {1'b0, bit_cnt_max[11:1]};
  else if (txd_start | xfer_bit_inc) xfer_cnt <=  bit_cnt_max;
  else                               xfer_cnt <=  xfer_cnt+12'hfff;
 
 
// Receive/Transmit buffer
//-------------------------
wire [19:0] xfer_buf_nxt =  {rxd_s, xfer_buf[19:1]};
 
always @ (posedge mclk or posedge por)
  if (por)               xfer_buf <=  18'h00000;
  else if (dbg_rd_rdy)   xfer_buf <=  {1'b1, dbg_dout[15:8], 2'b01, dbg_dout[7:0], 1'b0};
  else if (xfer_bit_inc) xfer_buf <=  xfer_buf_nxt;
 
 
// Generate TXD output
//------------------------
reg dbg_uart_txd;
 
always @ (posedge mclk or posedge por)
  if (por)                           dbg_uart_txd <=  1'b1;
  else if (xfer_bit_inc & tx_active) dbg_uart_txd <=  xfer_buf[0];
 
 
//=============================================================================
// 5) INTERFACE TO DEBUG REGISTERS
//=============================================================================
 
reg [5:0] dbg_addr;
 always @ (posedge mclk or posedge por)
  if (por)            dbg_addr <=  6'h00;
  else if (cmd_valid) dbg_addr <=  xfer_buf[`DBG_UART_ADDR];
 
reg       dbg_bw;
always @ (posedge mclk or posedge por)
  if (por)            dbg_bw   <=  1'b0;
  else if (cmd_valid) dbg_bw   <=  xfer_buf[`DBG_UART_BW];
 
wire        dbg_din_bw =  mem_burst  ? mem_bw : dbg_bw;
 
wire [15:0] dbg_din    =  dbg_din_bw ? {8'h00,           xfer_buf[18:11]} :
                                       {xfer_buf[18:11], xfer_buf[8:1]};
wire        dbg_wr     = (xfer_done & (uart_state==RX_DATA2));
wire        dbg_rd     = mem_burst ? (xfer_done & (uart_state==TX_DATA2)) :
                                     (cmd_valid & ~xfer_buf[`DBG_UART_WR]) | mem_burst_rd;
 
 
 
endmodule // omsp_dbg_uart
 
`include "openMSP430_undefines.v"