OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_avnet_lx9microbard/] [bench/] [verilog/] [msp_debug.v] - Rev 222

Go to most recent revision | Compare with Previous | Blame | View Log

//----------------------------------------------------------------------------
// Copyright (C) 2001 Authors
//
// This source file may be used and distributed without restriction provided
// that this copyright statement is not removed from the file and that any
// derivative work contains the original copyright notice and the associated
// disclaimer.
//
// This source file is free software; you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published
// by the Free Software Foundation; either version 2.1 of the License, or
// (at your option) any later version.
//
// This source is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
// License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this source; if not, write to the Free Software Foundation,
// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
//
//----------------------------------------------------------------------------
// 
// *File Name: msp_debug.v
// 
// *Module Description:
//                      MSP430 core debug utility signals
//
// *Author(s):
//              - Olivier Girard,    olgirard@gmail.com
//
//----------------------------------------------------------------------------
// $Rev: 136 $
// $LastChangedBy: olivier.girard $
// $LastChangedDate: 2012-03-22 22:14:16 +0100 (Thu, 22 Mar 2012) $
//----------------------------------------------------------------------------
`ifdef OMSP_NO_INCLUDE
`else
`include "openMSP430_defines.v"
`endif
 
module msp_debug (
 
// OUTPUTs
    e_state,                       // Execution state
    i_state,                       // Instruction fetch state
    inst_cycle,                    // Cycle number within current instruction
    inst_full,                     // Currently executed instruction (full version)
    inst_number,                   // Instruction number since last system reset
    inst_pc,                       // Instruction Program counter
    inst_short,                    // Currently executed instruction (short version)
 
// INPUTs
    core_select                    // Core selection
);
 
// OUTPUTs
//============
output  [8*32-1:0] e_state;        // Execution state
output  [8*32-1:0] i_state;        // Instruction fetch state
output      [31:0] inst_cycle;     // Cycle number within current instruction
output  [8*32-1:0] inst_full;      // Currently executed instruction (full version)
output      [31:0] inst_number;    // Instruction number since last system reset
output      [15:0] inst_pc;        // Instruction Program counter
output  [8*32-1:0] inst_short;     // Currently executed instruction (short version)
 
// INPUTs
//============
input              core_select;    // Core selection
 
 
//=============================================================================
// 1) ASCII FORMATING FUNCTIONS
//=============================================================================
 
// This function simply concatenates two strings together, ignorning the NULL
// at the end of string2.
// The specified number of space will be inserted between string1 and string2
function [64*8-1:0] myFormat;
 
  input [32*8-1:0] string1;
  input [32*8-1:0] string2;
  input      [3:0] space;
 
  integer i,j;      
  begin
     myFormat = 0;
`ifdef VXL			// no +:
`else
     j        = 0;
     for ( i=0; i < 32; i=i+1)                      // Copy string2
       begin
	  myFormat[8*i +: 8] = string2[8*i +: 8];
	  if ((string2[8*i +: 8] == 0) && (j == 0)) j=i;  
       end
 
     for ( i=0; i < space; i=i+1)                   // Add spaces
       myFormat[8*(j+i) +: 8] = " ";
     j=j+space;
 
     for ( i=0; i < 32; i=i+1)                      // Copy string1
       myFormat[8*(j+i) +: 8] = string1[8*i +: 8];
`endif    
  end
endfunction
 
 
//=============================================================================
// 2) CONNECTIONS TO MSP430 CORE INTERNALS
//=============================================================================
 
//-------------------------
// CPU 0
//-------------------------
wire  [2:0] omsp0_i_state_bin = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.i_state;
wire  [3:0] omsp0_e_state_bin = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.e_state;
 
wire        omsp0_decode      = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.decode;
wire [15:0] omsp0_ir          = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.ir;
wire        omsp0_irq_detect  = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.irq_detect;
wire  [3:0] omsp0_irq_num     = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.irq_num;
wire [15:0] omsp0_pc          = tb_openMSP430_fpga.dut.omsp_system_0_inst.openMSP430_0.frontend_0.pc;
 
wire        omsp0_mclk        = tb_openMSP430_fpga.dut.omsp_system_0_inst.mclk;
wire        omsp0_puc_rst     = tb_openMSP430_fpga.dut.omsp_system_0_inst.puc_rst;
 
//-------------------------
// CPU 1
//-------------------------
wire  [2:0] omsp1_i_state_bin = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.i_state;
wire  [3:0] omsp1_e_state_bin = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.e_state;
 
wire        omsp1_decode      = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.decode;
wire [15:0] omsp1_ir          = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.ir;
wire        omsp1_irq_detect  = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.irq_detect;
wire  [3:0] omsp1_irq_num     = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.irq_num;
wire [15:0] omsp1_pc          = tb_openMSP430_fpga.dut.omsp_system_1_inst.openMSP430_0.frontend_0.pc;
 
wire        omsp1_mclk        = tb_openMSP430_fpga.dut.omsp_system_1_inst.mclk;
wire        omsp1_puc_rst     = tb_openMSP430_fpga.dut.omsp_system_1_inst.puc_rst;
 
//-------------------------
// CPU Selection
//-------------------------
wire  [2:0] i_state_bin = core_select ? omsp1_i_state_bin : omsp0_i_state_bin;
wire  [3:0] e_state_bin = core_select ? omsp1_e_state_bin : omsp0_e_state_bin;
 
wire        decode      = core_select ? omsp1_decode      : omsp0_decode;
wire [15:0] ir          = core_select ? omsp1_ir          : omsp0_ir;
wire        irq_detect  = core_select ? omsp1_irq_detect  : omsp0_irq_detect;
wire  [3:0] irq_num     = core_select ? omsp1_irq_num     : omsp0_irq_num;
wire [15:0] pc          = core_select ? omsp1_pc          : omsp0_pc;
 
wire        mclk        = core_select ? omsp1_mclk        : omsp0_mclk;
wire        puc_rst     = core_select ? omsp1_puc_rst     : omsp0_puc_rst;
 
 
//=============================================================================
// 3) GENERATE DEBUG SIGNALS
//=============================================================================
 
// Instruction fetch state
//=========================
reg [8*32-1:0] i_state;
 
always @(i_state_bin)
    case(i_state_bin)
      3'h0    : i_state =  "IRQ_FETCH";
      3'h1    : i_state =  "IRQ_DONE";
      3'h2    : i_state =  "DEC";
      3'h3    : i_state =  "EXT1";
      3'h4    : i_state =  "EXT2";
      3'h5    : i_state =  "IDLE";
      default : i_state =  "XXXXX";
    endcase
 
 
// Execution state
//=========================
 
reg [8*32-1:0] e_state;
 
always @(e_state_bin)
    case(e_state_bin)
      4'h2    : e_state =  "IRQ_0";
      4'h1    : e_state =  "IRQ_1";
      4'h0    : e_state =  "IRQ_2";
      4'h3    : e_state =  "IRQ_3";
      4'h4    : e_state =  "IRQ_4";
      4'h5    : e_state =  "SRC_AD";
      4'h6    : e_state =  "SRC_RD";
      4'h7    : e_state =  "SRC_WR";
      4'h8    : e_state =  "DST_AD";
      4'h9    : e_state =  "DST_RD";
      4'hA    : e_state =  "DST_WR";
      4'hB    : e_state =  "EXEC";
      4'hC    : e_state =  "JUMP";
      4'hD    : e_state =  "IDLE";
      default : e_state =  "xxxx";
    endcase
 
 
// Count instruction number & cycles
//====================================
 
reg [31:0]  inst_number;
always @(posedge mclk or posedge puc_rst)
  if (puc_rst)     inst_number  <= 0;
  else if (decode) inst_number  <= inst_number+1;
 
reg [31:0]  inst_cycle;
always @(posedge mclk or posedge puc_rst)
  if (puc_rst)     inst_cycle <= 0;
  else if (decode) inst_cycle <= 0;
  else             inst_cycle <= inst_cycle+1;
 
 
// Decode instruction
//====================================
 
// Buffer opcode
reg [15:0]  opcode;
always @(posedge mclk or posedge puc_rst)
  if (puc_rst)     opcode  <= 0;
  else if (decode) opcode  <= ir;
 
// Interrupts
reg irq;
always @(posedge mclk or posedge puc_rst)
  if (puc_rst)     irq     <= 1'b1;
  else if (decode) irq     <= irq_detect;
 
// Instruction type
reg [8*32-1:0] inst_type;
always @(opcode or irq)
  if (irq)
    inst_type =  "IRQ";
  else
    case(opcode[15:13])
      3'b000  : inst_type =  "SIG-OP";
      3'b001  : inst_type =  "JUMP";
      default : inst_type =  "TWO-OP";
    endcase
 
 
// Instructions name
reg [8*32-1:0] inst_name;
always @(opcode or inst_type or irq_num)
  if (inst_type=="IRQ")
    case(irq_num[3:0])
      4'b0000        : inst_name =  "IRQ 0";
      4'b0001        : inst_name =  "IRQ 1";
      4'b0010        : inst_name =  "IRQ 2";
      4'b0011        : inst_name =  "IRQ 3";
      4'b0100        : inst_name =  "IRQ 4";
      4'b0101        : inst_name =  "IRQ 5";
      4'b0110        : inst_name =  "IRQ 6";
      4'b0111        : inst_name =  "IRQ 7";
      4'b1000        : inst_name =  "IRQ 8";
      4'b1001        : inst_name =  "IRQ 9";
      4'b1010        : inst_name =  "IRQ 10";
      4'b1011        : inst_name =  "IRQ 11";
      4'b1100        : inst_name =  "IRQ 12";
      4'b1101        : inst_name =  "IRQ 13";
      4'b1110        : inst_name =  "NMI";
      default        : inst_name =  "RESET";
    endcase
  else if (inst_type=="SIG-OP")
    case(opcode[15:7])
      9'b000100_000  : inst_name =  "RRC";
      9'b000100_001  : inst_name =  "SWPB";
      9'b000100_010  : inst_name =  "RRA";
      9'b000100_011  : inst_name =  "SXT";
      9'b000100_100  : inst_name =  "PUSH";
      9'b000100_101  : inst_name =  "CALL";
      9'b000100_110  : inst_name =  "RETI";
      default        : inst_name =  "xxxx";
    endcase
  else if (inst_type=="JUMP")
    case(opcode[15:10])
      6'b001_000     : inst_name =  "JNE";
      6'b001_001     : inst_name =  "JEQ";
      6'b001_010     : inst_name =  "JNC";
      6'b001_011     : inst_name =  "JC";
      6'b001_100     : inst_name =  "JN";
      6'b001_101     : inst_name =  "JGE";
      6'b001_110     : inst_name =  "JL";
      6'b001_111     : inst_name =  "JMP";
      default        : inst_name =  "xxxx";
    endcase
  else if (inst_type=="TWO-OP")
    case(opcode[15:12])
      4'b0100        : inst_name =  "MOV";
      4'b0101        : inst_name =  "ADD";
      4'b0110        : inst_name =  "ADDC";
      4'b0111        : inst_name =  "SUBC";
      4'b1000        : inst_name =  "SUB";
      4'b1001        : inst_name =  "CMP";
      4'b1010        : inst_name =  "DADD";
      4'b1011        : inst_name =  "BIT";
      4'b1100        : inst_name =  "BIC";
      4'b1101        : inst_name =  "BIS";
      4'b1110        : inst_name =  "XOR";
      4'b1111        : inst_name =  "AND";
      default        : inst_name =  "xxxx";
    endcase
 
// Instructions byte/word mode
reg [8*32-1:0] inst_bw;
always @(opcode or inst_type)
  if (inst_type=="IRQ")
    inst_bw =  "";
  else if (inst_type=="SIG-OP")
    inst_bw =  opcode[6] ? ".B" : "";
  else if (inst_type=="JUMP")
    inst_bw =  "";
  else if (inst_type=="TWO-OP")
    inst_bw =  opcode[6] ? ".B" : "";
 
// Source register
reg [8*32-1:0] inst_src;
wire     [3:0] src_reg = (inst_type=="SIG-OP") ? opcode[3:0] : opcode[11:8];
 
always @(src_reg or inst_type)
  if (inst_type=="IRQ")
    inst_src =  "";
  else if (inst_type=="JUMP")
    inst_src =  "";
  else if ((inst_type=="SIG-OP") || (inst_type=="TWO-OP"))
    case(src_reg)
      4'b0000 : inst_src =  "r0";
      4'b0001 : inst_src =  "r1";
      4'b0010 : inst_src =  "r2";
      4'b0011 : inst_src =  "r3";
      4'b0100 : inst_src =  "r4";
      4'b0101 : inst_src =  "r5";
      4'b0110 : inst_src =  "r6";
      4'b0111 : inst_src =  "r7";
      4'b1000 : inst_src =  "r8";
      4'b1001 : inst_src =  "r9";
      4'b1010 : inst_src =  "r10";
      4'b1011 : inst_src =  "r11";
      4'b1100 : inst_src =  "r12";
      4'b1101 : inst_src =  "r13";
      4'b1110 : inst_src =  "r14";
      default : inst_src =  "r15";
    endcase
 
// Destination register
reg [8*32-1:0] inst_dst;
always @(opcode or inst_type)
  if (inst_type=="IRQ")
    inst_dst =  "";
  else if (inst_type=="SIG-OP")
    inst_dst =  "";
  else if (inst_type=="JUMP")
    inst_dst =  "";
  else if (inst_type=="TWO-OP")
    case(opcode[3:0])
      4'b0000 : inst_dst =  "r0";
      4'b0001 : inst_dst =  "r1";
      4'b0010 : inst_dst =  "r2";
      4'b0011 : inst_dst =  "r3";
      4'b0100 : inst_dst =  "r4";
      4'b0101 : inst_dst =  "r5";
      4'b0110 : inst_dst =  "r6";
      4'b0111 : inst_dst =  "r7";
      4'b1000 : inst_dst =  "r8";
      4'b1001 : inst_dst =  "r9";
      4'b1010 : inst_dst =  "r10";
      4'b1011 : inst_dst =  "r11";
      4'b1100 : inst_dst =  "r12";
      4'b1101 : inst_dst =  "r13";
      4'b1110 : inst_dst =  "r14";
      default : inst_dst =  "r15";
    endcase
 
// Source Addressing mode
reg [8*32-1:0] inst_as;
always @(inst_type or src_reg or opcode or inst_src)
  begin
  if (inst_type=="IRQ")
    inst_as =  "";
  else if (inst_type=="JUMP")
    inst_as =  "";
  else if (src_reg==4'h3) // Addressing mode using R3
    case (opcode[5:4])
      2'b11  : inst_as =  "#-1";
      2'b10  : inst_as =  "#2";
      2'b01  : inst_as =  "#1";
      default: inst_as =  "#0";
    endcase
  else if (src_reg==4'h2) // Addressing mode using R2
    case (opcode[5:4])
      2'b11  : inst_as =  "#8";
      2'b10  : inst_as =  "#4";
      2'b01  : inst_as =  "&EDE";
      default: inst_as =  inst_src;
    endcase
  else if (src_reg==4'h0) // Addressing mode using R0
    case (opcode[5:4])
      2'b11  : inst_as =  "#N";
      2'b10  : inst_as =  myFormat("@", inst_src, 0);
      2'b01  : inst_as =  "EDE";
      default: inst_as =  inst_src;
    endcase
  else                    // General Addressing mode
    case (opcode[5:4])
      2'b11  : begin
	       inst_as =  myFormat("@", inst_src, 0);
	       inst_as =  myFormat(inst_as, "+", 0);
               end
      2'b10  : inst_as =  myFormat("@", inst_src, 0);
      2'b01  : begin
	       inst_as =  myFormat("x(", inst_src, 0);
  	       inst_as =  myFormat(inst_as, ")", 0);
               end
      default: inst_as =  inst_src;
    endcase
  end
 
// Destination Addressing mode
reg [8*32-1:0] inst_ad;
always @(opcode or inst_type or inst_dst)
  begin
     if (inst_type!="TWO-OP")
       inst_ad =  "";
     else if (opcode[3:0]==4'h2)   // Addressing mode using R2
       case (opcode[7])
	 1'b1   : inst_ad =  "&EDE";
	 default: inst_ad =  inst_dst;
       endcase
     else if (opcode[3:0]==4'h0)   // Addressing mode using R0
       case (opcode[7])
	 2'b1   : inst_ad =  "EDE";
	 default: inst_ad =  inst_dst;
       endcase
     else                          // General Addressing mode
       case (opcode[7])
	 2'b1   : begin
	          inst_ad =  myFormat("x(", inst_dst, 0);
  	          inst_ad =  myFormat(inst_ad, ")", 0);
                  end
	 default: inst_ad =  inst_dst;
       endcase
  end
 
 
// Currently executed instruction
//================================
 
wire [8*32-1:0] inst_short = inst_name;
 
reg  [8*32-1:0] inst_full;
always @(inst_type or inst_name or inst_bw or inst_as or inst_ad)
  begin
     inst_full   = myFormat(inst_name, inst_bw, 0);
     inst_full   = myFormat(inst_full, inst_as, 1);
     if (inst_type=="TWO-OP")
       inst_full = myFormat(inst_full, ",",     0);
     inst_full   = myFormat(inst_full, inst_ad, 1);
     if (opcode==16'h4303)
       inst_full = "NOP";
     if (opcode==`DBG_SWBRK_OP)
       inst_full = "SBREAK";
 
  end
 
 
// Instruction program counter
//================================
 
reg  [15:0] inst_pc;
always @(posedge mclk or posedge puc_rst)
  if (puc_rst)     inst_pc  <=  16'h0000;
  else if (decode) inst_pc  <=  pc;
 
 
endmodule // msp_debug
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.