URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [fpga/] [xilinx_avnet_lx9microbard/] [rtl/] [verilog/] [coregen/] [ram_16x1k_dp.veo] - Rev 200
Go to most recent revision | Compare with Previous | Blame | View Log
/*******************************************************************************
* This file is owned and controlled by Xilinx and must be used solely *
* for design, simulation, implementation and creation of design files *
* limited to Xilinx devices or technologies. Use with non-Xilinx *
* devices or technologies is expressly prohibited and immediately *
* terminates your license. *
* *
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY *
* FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES. BY *
* PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE *
* IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS *
* MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY *
* CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY *
* RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY *
* DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE *
* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR *
* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF *
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A *
* PARTICULAR PURPOSE. *
* *
* Xilinx products are not intended for use in life support appliances, *
* devices, or systems. Use in such applications are expressly *
* prohibited. *
* *
* (c) Copyright 1995-2012 Xilinx, Inc. *
* All rights reserved. *
*******************************************************************************/
/*******************************************************************************
* Generated from core with identifier: xilinx.com:ip:blk_mem_gen:7.2 *
* *
* The Xilinx LogiCORE IP Block Memory Generator replaces the Dual Port *
* Block Memory and Single Port Block Memory LogiCOREs, but is not a *
* direct drop-in replacement. It should be used in all new Xilinx *
* designs. The core supports RAM and ROM functions over a wide range of *
* widths and depths. Use this core to generate block memories with *
* symmetric or asymmetric read and write port widths, as well as cores *
* which can perform simultaneous write operations to separate *
* locations, and simultaneous read operations from the same location. *
* For more information on differences in interface and feature support *
* between this core and the Dual Port Block Memory and Single Port *
* Block Memory LogiCOREs, please consult the data sheet. *
*******************************************************************************/
// Interfaces:
// CLK.ACLK
// AXI4 Interconnect Clock Input
// RST.ARESETN
// AXI4 Interconnect Reset Input
// AXI_SLAVE_S_AXI
// AXI_SLAVE
// AXILite_SLAVE_S_AXI
// AXILite_SLAVE
// BRAM_PORTA
// BRAM_PORTA
// BRAM_PORTB
// BRAM_PORTB
// The following must be inserted into your Verilog file for this
// core to be instantiated. Change the instance name and port connections
// (in parentheses) to your own signal names.
//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
ram_16x1k_dp your_instance_name (
.clka(clka), // input clka
.ena(ena), // input ena
.wea(wea), // input [1 : 0] wea
.addra(addra), // input [9 : 0] addra
.dina(dina), // input [15 : 0] dina
.douta(douta), // output [15 : 0] douta
.clkb(clkb), // input clkb
.enb(enb), // input enb
.web(web), // input [1 : 0] web
.addrb(addrb), // input [9 : 0] addrb
.dinb(dinb), // input [15 : 0] dinb
.doutb(doutb) // output [15 : 0] doutb
);
// INST_TAG_END ------ End INSTANTIATION Template ---------
// You must compile the wrapper file ram_16x1k_dp.v when simulating
// the core, ram_16x1k_dp. When compiling the wrapper file, be sure to
// reference the XilinxCoreLib Verilog simulation library. For detailed
// instructions, please refer to the "CORE Generator Help".
Go to most recent revision | Compare with Previous | Blame | View Log