URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [fpga/] [xilinx_diligent_s3board/] [rtl/] [verilog/] [openMSP430_fpga.v] - Rev 193
Go to most recent revision | Compare with Previous | Blame | View Log
//---------------------------------------------------------------------------- // Copyright (C) 2001 Authors // // This source file may be used and distributed without restriction provided // that this copyright statement is not removed from the file and that any // derivative work contains the original copyright notice and the associated // disclaimer. // // This source file is free software; you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation; either version 2.1 of the License, or // (at your option) any later version. // // This source is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public // License for more details. // // You should have received a copy of the GNU Lesser General Public License // along with this source; if not, write to the Free Software Foundation, // Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA // //---------------------------------------------------------------------------- // // *File Name: openMSP430_fpga.v // // *Module Description: // openMSP430 FPGA Top-level for the Diligent // Spartan-3 starter kit. // // *Author(s): // - Olivier Girard, olgirard@gmail.com // //---------------------------------------------------------------------------- // $Rev: 155 $ // $LastChangedBy: olivier.girard $ // $LastChangedDate: 2012-10-15 23:35:05 +0200 (Mon, 15 Oct 2012) $ //---------------------------------------------------------------------------- `include "openMSP430_defines.v" module openMSP430_fpga ( // Clock Sources CLK_50MHz, CLK_SOCKET, // Slide Switches SW7, SW6, SW5, SW4, SW3, SW2, SW1, SW0, // Push Button Switches BTN3, BTN2, BTN1, BTN0, // LEDs LED7, LED6, LED5, LED4, LED3, LED2, LED1, LED0, // Four-Sigit, Seven-Segment LED Display SEG_A, SEG_B, SEG_C, SEG_D, SEG_E, SEG_F, SEG_G, SEG_DP, SEG_AN0, SEG_AN1, SEG_AN2, SEG_AN3, // RS-232 Port UART_RXD, UART_TXD, UART_RXD_A, UART_TXD_A, // PS/2 Mouse/Keyboard Port PS2_D, PS2_C, // Fast, Asynchronous SRAM SRAM_A17, // Address Bus Connections SRAM_A16, SRAM_A15, SRAM_A14, SRAM_A13, SRAM_A12, SRAM_A11, SRAM_A10, SRAM_A9, SRAM_A8, SRAM_A7, SRAM_A6, SRAM_A5, SRAM_A4, SRAM_A3, SRAM_A2, SRAM_A1, SRAM_A0, SRAM_OE, // Write enable and output enable control signals SRAM_WE, SRAM0_IO15, // SRAM Data signals, chip enables, and byte enables SRAM0_IO14, SRAM0_IO13, SRAM0_IO12, SRAM0_IO11, SRAM0_IO10, SRAM0_IO9, SRAM0_IO8, SRAM0_IO7, SRAM0_IO6, SRAM0_IO5, SRAM0_IO4, SRAM0_IO3, SRAM0_IO2, SRAM0_IO1, SRAM0_IO0, SRAM0_CE1, SRAM0_UB1, SRAM0_LB1, SRAM1_IO15, SRAM1_IO14, SRAM1_IO13, SRAM1_IO12, SRAM1_IO11, SRAM1_IO10, SRAM1_IO9, SRAM1_IO8, SRAM1_IO7, SRAM1_IO6, SRAM1_IO5, SRAM1_IO4, SRAM1_IO3, SRAM1_IO2, SRAM1_IO1, SRAM1_IO0, SRAM1_CE2, SRAM1_UB2, SRAM1_LB2, // VGA Port VGA_R, VGA_G, VGA_B, VGA_HS, VGA_VS ); // Clock Sources input CLK_50MHz; input CLK_SOCKET; // Slide Switches input SW7; input SW6; input SW5; input SW4; input SW3; input SW2; input SW1; input SW0; // Push Button Switches input BTN3; input BTN2; input BTN1; input BTN0; // LEDs output LED7; output LED6; output LED5; output LED4; output LED3; output LED2; output LED1; output LED0; // Four-Sigit, Seven-Segment LED Display output SEG_A; output SEG_B; output SEG_C; output SEG_D; output SEG_E; output SEG_F; output SEG_G; output SEG_DP; output SEG_AN0; output SEG_AN1; output SEG_AN2; output SEG_AN3; // RS-232 Port input UART_RXD; output UART_TXD; input UART_RXD_A; output UART_TXD_A; // PS/2 Mouse/Keyboard Port inout PS2_D; output PS2_C; // Fast, Asynchronous SRAM output SRAM_A17; // Address Bus Connections output SRAM_A16; output SRAM_A15; output SRAM_A14; output SRAM_A13; output SRAM_A12; output SRAM_A11; output SRAM_A10; output SRAM_A9; output SRAM_A8; output SRAM_A7; output SRAM_A6; output SRAM_A5; output SRAM_A4; output SRAM_A3; output SRAM_A2; output SRAM_A1; output SRAM_A0; output SRAM_OE; // Write enable and output enable control signals output SRAM_WE; inout SRAM0_IO15; // SRAM Data signals, chip enables, and byte enables inout SRAM0_IO14; inout SRAM0_IO13; inout SRAM0_IO12; inout SRAM0_IO11; inout SRAM0_IO10; inout SRAM0_IO9; inout SRAM0_IO8; inout SRAM0_IO7; inout SRAM0_IO6; inout SRAM0_IO5; inout SRAM0_IO4; inout SRAM0_IO3; inout SRAM0_IO2; inout SRAM0_IO1; inout SRAM0_IO0; output SRAM0_CE1; output SRAM0_UB1; output SRAM0_LB1; inout SRAM1_IO15; inout SRAM1_IO14; inout SRAM1_IO13; inout SRAM1_IO12; inout SRAM1_IO11; inout SRAM1_IO10; inout SRAM1_IO9; inout SRAM1_IO8; inout SRAM1_IO7; inout SRAM1_IO6; inout SRAM1_IO5; inout SRAM1_IO4; inout SRAM1_IO3; inout SRAM1_IO2; inout SRAM1_IO1; inout SRAM1_IO0; output SRAM1_CE2; output SRAM1_UB2; output SRAM1_LB2; // VGA Port output VGA_R; output VGA_G; output VGA_B; output VGA_HS; output VGA_VS; //============================================================================= // 1) INTERNAL WIRES/REGISTERS/PARAMETERS DECLARATION //============================================================================= // openMSP430 output buses wire [13:0] per_addr; wire [15:0] per_din; wire [1:0] per_we; wire [`DMEM_MSB:0] dmem_addr; wire [15:0] dmem_din; wire [1:0] dmem_wen; wire [`PMEM_MSB:0] pmem_addr; wire [15:0] pmem_din; wire [1:0] pmem_wen; wire [13:0] irq_acc; // openMSP430 input buses wire [13:0] irq_bus; wire [15:0] per_dout; wire [15:0] dmem_dout; wire [15:0] pmem_dout; // GPIO wire [7:0] p1_din; wire [7:0] p1_dout; wire [7:0] p1_dout_en; wire [7:0] p1_sel; wire [7:0] p2_din; wire [7:0] p2_dout; wire [7:0] p2_dout_en; wire [7:0] p2_sel; wire [7:0] p3_din; wire [7:0] p3_dout; wire [7:0] p3_dout_en; wire [7:0] p3_sel; wire [15:0] per_dout_dio; // Timer A wire [15:0] per_dout_tA; // 7 segment driver wire [15:0] per_dout_7seg; // Simple UART wire irq_uart_rx; wire irq_uart_tx; wire [15:0] per_dout_uart; wire hw_uart_txd; wire hw_uart_rxd; // Others wire reset_pin; //============================================================================= // 2) CLOCK GENERATION //============================================================================= // Input buffers //------------------------ IBUFG ibuf_clk_main (.O(clk_50M_in), .I(CLK_50MHz)); IBUFG ibuf_clk_socket (.O(clk_socket_in), .I(CLK_SOCKET)); // Digital Clock Manager //------------------------ // Generate 20MHz clock from 50MHz on-board oscillator //`define DCM_FX_MODE `ifdef DCM_FX_MODE DCM dcm_adv_clk_main ( // OUTPUTs .CLK0 (), .CLK90 (), .CLK180 (), .CLK270 (), .CLK2X (), .CLK2X180 (), .CLKDV (), .CLKFX (dcm_clk), .CLKFX180 (), .PSDONE (), .STATUS (), .LOCKED (dcm_locked), // INPUTs .CLKIN (clk_50M_in), .CLKFB (1'b0), .PSINCDEC (1'b0), .PSEN (1'b0), .DSSEN (1'b0), .RST (reset_pin), .PSCLK (1'b0) ); // synopsys translate_off defparam dcm_adv_clk_main.CLK_FEEDBACK = "NONE"; defparam dcm_adv_clk_main.CLKDV_DIVIDE = 2.5; defparam dcm_adv_clk_main.CLKIN_DIVIDE_BY_2 = "FALSE"; defparam dcm_adv_clk_main.CLKIN_PERIOD = 20.0; defparam dcm_adv_clk_main.CLKOUT_PHASE_SHIFT = "NONE"; defparam dcm_adv_clk_main.DESKEW_ADJUST = "SYSTEM_SYNCHRONOUS"; defparam dcm_adv_clk_main.DFS_FREQUENCY_MODE = "LOW"; defparam dcm_adv_clk_main.DLL_FREQUENCY_MODE = "LOW"; defparam dcm_adv_clk_main.DUTY_CYCLE_CORRECTION = "TRUE"; defparam dcm_adv_clk_main.FACTORY_JF = 16'hC080; defparam dcm_adv_clk_main.PHASE_SHIFT = 0; defparam dcm_adv_clk_main.STARTUP_WAIT = "FALSE"; defparam dcm_adv_clk_main.CLKFX_DIVIDE = 5; defparam dcm_adv_clk_main.CLKFX_MULTIPLY = 2; // synopsys translate_on `else DCM dcm_adv_clk_main ( // OUTPUTs .CLKDV (dcm_clk), .CLKFX (), .CLKFX180 (), .CLK0 (CLK0_BUF), .CLK2X (), .CLK2X180 (), .CLK90 (), .CLK180 (), .CLK270 (), .LOCKED (dcm_locked), .PSDONE (), .STATUS (), // INPUTs .CLKFB (CLKFB_IN), .CLKIN (clk_50M_in), .PSEN (1'b0), .PSINCDEC (1'b0), .DSSEN (1'b0), .PSCLK (1'b0), .RST (reset_pin) ); BUFG CLK0_BUFG_INST ( .I(CLK0_BUF), .O(CLKFB_IN) ); // synopsys translate_off defparam dcm_adv_clk_main.CLK_FEEDBACK = "1X"; defparam dcm_adv_clk_main.CLKDV_DIVIDE = 2.5; defparam dcm_adv_clk_main.CLKFX_DIVIDE = 1; defparam dcm_adv_clk_main.CLKFX_MULTIPLY = 4; defparam dcm_adv_clk_main.CLKIN_DIVIDE_BY_2 = "FALSE"; defparam dcm_adv_clk_main.CLKIN_PERIOD = 20.000; defparam dcm_adv_clk_main.CLKOUT_PHASE_SHIFT = "NONE"; defparam dcm_adv_clk_main.DESKEW_ADJUST = "SYSTEM_SYNCHRONOUS"; defparam dcm_adv_clk_main.DFS_FREQUENCY_MODE = "LOW"; defparam dcm_adv_clk_main.DLL_FREQUENCY_MODE = "LOW"; defparam dcm_adv_clk_main.DUTY_CYCLE_CORRECTION = "TRUE"; defparam dcm_adv_clk_main.FACTORY_JF = 16'h8080; defparam dcm_adv_clk_main.PHASE_SHIFT = 0; defparam dcm_adv_clk_main.STARTUP_WAIT = "FALSE"; // synopsys translate_on `endif //wire dcm_locked = 1'b1; //wire reset_n; //reg dcm_clk; //always @(posedge clk_50M_in) // if (~reset_n) dcm_clk <= 1'b0; // else dcm_clk <= ~dcm_clk; // Clock buffers //------------------------ BUFG buf_sys_clock (.O(clk_sys), .I(dcm_clk)); //============================================================================= // 3) RESET GENERATION & FPGA STARTUP //============================================================================= // Reset input buffer IBUF ibuf_reset_n (.O(reset_pin), .I(BTN3)); wire reset_pin_n = ~reset_pin; // Release the reset only, if the DCM is locked assign reset_n = reset_pin_n & dcm_locked; //Include the startup device wire gsr_tb; wire gts_tb; STARTUP_SPARTAN3 xstartup (.CLK(clk_sys), .GSR(gsr_tb), .GTS(gts_tb)); //============================================================================= // 4) OPENMSP430 //============================================================================= openMSP430 openMSP430_0 ( // OUTPUTs .aclk (), // ASIC ONLY: ACLK .aclk_en (aclk_en), // FPGA ONLY: ACLK enable .dbg_freeze (dbg_freeze), // Freeze peripherals .dbg_i2c_sda_out (), // Debug interface: I2C SDA OUT .dbg_uart_txd (dbg_uart_txd), // Debug interface: UART TXD .dco_enable (), // ASIC ONLY: Fast oscillator enable .dco_wkup (), // ASIC ONLY: Fast oscillator wake-up (asynchronous) .dmem_addr (dmem_addr), // Data Memory address .dmem_cen (dmem_cen), // Data Memory chip enable (low active) .dmem_din (dmem_din), // Data Memory data input .dmem_wen (dmem_wen), // Data Memory write enable (low active) .irq_acc (irq_acc), // Interrupt request accepted (one-hot signal) .lfxt_enable (), // ASIC ONLY: Low frequency oscillator enable .lfxt_wkup (), // ASIC ONLY: Low frequency oscillator wake-up (asynchronous) .mclk (mclk), // Main system clock .per_addr (per_addr), // Peripheral address .per_din (per_din), // Peripheral data input .per_we (per_we), // Peripheral write enable (high active) .per_en (per_en), // Peripheral enable (high active) .pmem_addr (pmem_addr), // Program Memory address .pmem_cen (pmem_cen), // Program Memory chip enable (low active) .pmem_din (pmem_din), // Program Memory data input (optional) .pmem_wen (pmem_wen), // Program Memory write enable (low active) (optional) .puc_rst (puc_rst), // Main system reset .smclk (), // ASIC ONLY: SMCLK .smclk_en (smclk_en), // FPGA ONLY: SMCLK enable // INPUTs .cpu_en (1'b1), // Enable CPU code execution (asynchronous and non-glitchy) .dbg_en (1'b1), // Debug interface enable (asynchronous and non-glitchy) .dbg_i2c_addr (7'h00), // Debug interface: I2C Address .dbg_i2c_broadcast (7'h00), // Debug interface: I2C Broadcast Address (for multicore systems) .dbg_i2c_scl (1'b1), // Debug interface: I2C SCL .dbg_i2c_sda_in (1'b1), // Debug interface: I2C SDA IN .dbg_uart_rxd (dbg_uart_rxd), // Debug interface: UART RXD (asynchronous) .dco_clk (clk_sys), // Fast oscillator (fast clock) .dmem_dout (dmem_dout), // Data Memory data output .irq (irq_bus), // Maskable interrupts .lfxt_clk (1'b0), // Low frequency oscillator (typ 32kHz) .nmi (nmi), // Non-maskable interrupt (asynchronous) .per_dout (per_dout), // Peripheral data output .pmem_dout (pmem_dout), // Program Memory data output .reset_n (reset_n), // Reset Pin (low active, asynchronous and non-glitchy) .scan_enable (1'b0), // ASIC ONLY: Scan enable (active during scan shifting) .scan_mode (1'b0), // ASIC ONLY: Scan mode .wkup (1'b0) // ASIC ONLY: System Wake-up (asynchronous and non-glitchy) ); //============================================================================= // 5) OPENMSP430 PERIPHERALS //============================================================================= // // Digital I/O //------------------------------- omsp_gpio #(.P1_EN(1), .P2_EN(1), .P3_EN(1), .P4_EN(0), .P5_EN(0), .P6_EN(0)) gpio_0 ( // OUTPUTs .irq_port1 (irq_port1), // Port 1 interrupt .irq_port2 (irq_port2), // Port 2 interrupt .p1_dout (p1_dout), // Port 1 data output .p1_dout_en (p1_dout_en), // Port 1 data output enable .p1_sel (p1_sel), // Port 1 function select .p2_dout (p2_dout), // Port 2 data output .p2_dout_en (p2_dout_en), // Port 2 data output enable .p2_sel (p2_sel), // Port 2 function select .p3_dout (p3_dout), // Port 3 data output .p3_dout_en (p3_dout_en), // Port 3 data output enable .p3_sel (p3_sel), // Port 3 function select .p4_dout (), // Port 4 data output .p4_dout_en (), // Port 4 data output enable .p4_sel (), // Port 4 function select .p5_dout (), // Port 5 data output .p5_dout_en (), // Port 5 data output enable .p5_sel (), // Port 5 function select .p6_dout (), // Port 6 data output .p6_dout_en (), // Port 6 data output enable .p6_sel (), // Port 6 function select .per_dout (per_dout_dio), // Peripheral data output // INPUTs .mclk (mclk), // Main system clock .p1_din (p1_din), // Port 1 data input .p2_din (p2_din), // Port 2 data input .p3_din (p3_din), // Port 3 data input .p4_din (8'h00), // Port 4 data input .p5_din (8'h00), // Port 5 data input .p6_din (8'h00), // Port 6 data input .per_addr (per_addr), // Peripheral address .per_din (per_din), // Peripheral data input .per_en (per_en), // Peripheral enable (high active) .per_we (per_we), // Peripheral write enable (high active) .puc_rst (puc_rst) // Main system reset ); // // Timer A //---------------------------------------------- omsp_timerA timerA_0 ( // OUTPUTs .irq_ta0 (irq_ta0), // Timer A interrupt: TACCR0 .irq_ta1 (irq_ta1), // Timer A interrupt: TAIV, TACCR1, TACCR2 .per_dout (per_dout_tA), // Peripheral data output .ta_out0 (ta_out0), // Timer A output 0 .ta_out0_en (ta_out0_en), // Timer A output 0 enable .ta_out1 (ta_out1), // Timer A output 1 .ta_out1_en (ta_out1_en), // Timer A output 1 enable .ta_out2 (ta_out2), // Timer A output 2 .ta_out2_en (ta_out2_en), // Timer A output 2 enable // INPUTs .aclk_en (aclk_en), // ACLK enable (from CPU) .dbg_freeze (dbg_freeze), // Freeze Timer A counter .inclk (inclk), // INCLK external timer clock (SLOW) .irq_ta0_acc (irq_acc[9]), // Interrupt request TACCR0 accepted .mclk (mclk), // Main system clock .per_addr (per_addr), // Peripheral address .per_din (per_din), // Peripheral data input .per_en (per_en), // Peripheral enable (high active) .per_we (per_we), // Peripheral write enable (high active) .puc_rst (puc_rst), // Main system reset .smclk_en (smclk_en), // SMCLK enable (from CPU) .ta_cci0a (ta_cci0a), // Timer A capture 0 input A .ta_cci0b (ta_cci0b), // Timer A capture 0 input B .ta_cci1a (ta_cci1a), // Timer A capture 1 input A .ta_cci1b (1'b0), // Timer A capture 1 input B .ta_cci2a (ta_cci2a), // Timer A capture 2 input A .ta_cci2b (1'b0), // Timer A capture 2 input B .taclk (taclk) // TACLK external timer clock (SLOW) ); // // Four-Digit, Seven-Segment LED Display driver //---------------------------------------------- driver_7segment driver_7segment_0 ( // OUTPUTs .per_dout (per_dout_7seg), // Peripheral data output .seg_a (seg_a_), // Segment A control .seg_b (seg_b_), // Segment B control .seg_c (seg_c_), // Segment C control .seg_d (seg_d_), // Segment D control .seg_e (seg_e_), // Segment E control .seg_f (seg_f_), // Segment F control .seg_g (seg_g_), // Segment G control .seg_dp (seg_dp_), // Segment DP control .seg_an0 (seg_an0_), // Anode 0 control .seg_an1 (seg_an1_), // Anode 1 control .seg_an2 (seg_an2_), // Anode 2 control .seg_an3 (seg_an3_), // Anode 3 control // INPUTs .mclk (mclk), // Main system clock .per_addr (per_addr), // Peripheral address .per_din (per_din), // Peripheral data input .per_en (per_en), // Peripheral enable (high active) .per_we (per_we), // Peripheral write enable (high active) .puc_rst (puc_rst) // Main system reset ); // // Simple full duplex UART (8N1 protocol) //---------------------------------------- omsp_uart #(.BASE_ADDR(15'h0080)) uart_0 ( // OUTPUTs .irq_uart_rx (irq_uart_rx), // UART receive interrupt .irq_uart_tx (irq_uart_tx), // UART transmit interrupt .per_dout (per_dout_uart), // Peripheral data output .uart_txd (hw_uart_txd), // UART Data Transmit (TXD) // INPUTs .mclk (mclk), // Main system clock .per_addr (per_addr), // Peripheral address .per_din (per_din), // Peripheral data input .per_en (per_en), // Peripheral enable (high active) .per_we (per_we), // Peripheral write enable (high active) .puc_rst (puc_rst), // Main system reset .smclk_en (smclk_en), // SMCLK enable (from CPU) .uart_rxd (hw_uart_rxd) // UART Data Receive (RXD) ); // // Combine peripheral data buses //------------------------------- assign per_dout = per_dout_dio | per_dout_tA | per_dout_7seg | per_dout_uart; // // Assign interrupts //------------------------------- assign nmi = 1'b0; assign irq_bus = {1'b0, // Vector 13 (0xFFFA) 1'b0, // Vector 12 (0xFFF8) 1'b0, // Vector 11 (0xFFF6) 1'b0, // Vector 10 (0xFFF4) - Watchdog - irq_ta0, // Vector 9 (0xFFF2) irq_ta1, // Vector 8 (0xFFF0) irq_uart_rx, // Vector 7 (0xFFEE) irq_uart_tx, // Vector 6 (0xFFEC) 1'b0, // Vector 5 (0xFFEA) 1'b0, // Vector 4 (0xFFE8) irq_port2, // Vector 3 (0xFFE6) irq_port1, // Vector 2 (0xFFE4) 1'b0, // Vector 1 (0xFFE2) 1'b0}; // Vector 0 (0xFFE0) // // GPIO Function selection //-------------------------- // P1.0/TACLK I/O pin / Timer_A, clock signal TACLK input // P1.1/TA0 I/O pin / Timer_A, capture: CCI0A input, compare: Out0 output // P1.2/TA1 I/O pin / Timer_A, capture: CCI1A input, compare: Out1 output // P1.3/TA2 I/O pin / Timer_A, capture: CCI2A input, compare: Out2 output // P1.4/SMCLK I/O pin / SMCLK signal output // P1.5/TA0 I/O pin / Timer_A, compare: Out0 output // P1.6/TA1 I/O pin / Timer_A, compare: Out1 output // P1.7/TA2 I/O pin / Timer_A, compare: Out2 output wire [7:0] p1_io_mux_b_unconnected; wire [7:0] p1_io_dout; wire [7:0] p1_io_dout_en; wire [7:0] p1_io_din; io_mux #8 io_mux_p1 ( .a_din (p1_din), .a_dout (p1_dout), .a_dout_en (p1_dout_en), .b_din ({p1_io_mux_b_unconnected[7], p1_io_mux_b_unconnected[6], p1_io_mux_b_unconnected[5], p1_io_mux_b_unconnected[4], ta_cci2a, ta_cci1a, ta_cci0a, taclk }), .b_dout ({ta_out2, ta_out1, ta_out0, (smclk_en & mclk), ta_out2, ta_out1, ta_out0, 1'b0 }), .b_dout_en ({ta_out2_en, ta_out1_en, ta_out0_en, 1'b1, ta_out2_en, ta_out1_en, ta_out0_en, 1'b0 }), .io_din (p1_io_din), .io_dout (p1_io_dout), .io_dout_en (p1_io_dout_en), .sel (p1_sel) ); // P2.0/ACLK I/O pin / ACLK output // P2.1/INCLK I/O pin / Timer_A, clock signal at INCLK // P2.2/TA0 I/O pin / Timer_A, capture: CCI0B input // P2.3/TA1 I/O pin / Timer_A, compare: Out1 output // P2.4/TA2 I/O pin / Timer_A, compare: Out2 output wire [7:0] p2_io_mux_b_unconnected; wire [7:0] p2_io_dout; wire [7:0] p2_io_dout_en; wire [7:0] p2_io_din; io_mux #8 io_mux_p2 ( .a_din (p2_din), .a_dout (p2_dout), .a_dout_en (p2_dout_en), .b_din ({p2_io_mux_b_unconnected[7], p2_io_mux_b_unconnected[6], p2_io_mux_b_unconnected[5], p2_io_mux_b_unconnected[4], p2_io_mux_b_unconnected[3], ta_cci0b, inclk, p2_io_mux_b_unconnected[0] }), .b_dout ({1'b0, 1'b0, 1'b0, ta_out2, ta_out1, 1'b0, 1'b0, (aclk_en & mclk) }), .b_dout_en ({1'b0, 1'b0, 1'b0, ta_out2_en, ta_out1_en, 1'b0, 1'b0, 1'b1 }), .io_din (p2_io_din), .io_dout (p2_io_dout), .io_dout_en (p2_io_dout_en), .sel (p2_sel) ); //============================================================================= // 6) PROGRAM AND DATA MEMORIES //============================================================================= // Data Memory ram_8x512_hi ram_8x512_hi_0 ( .addr (dmem_addr), .clk (clk_sys), .din (dmem_din[15:8]), .dout (dmem_dout[15:8]), .en (dmem_cen), .we (dmem_wen[1]) ); ram_8x512_lo ram_8x512_lo_0 ( .addr (dmem_addr), .clk (clk_sys), .din (dmem_din[7:0]), .dout (dmem_dout[7:0]), .en (dmem_cen), .we (dmem_wen[0]) ); // Program Memory rom_8x2k_hi rom_8x2k_hi_0 ( .addr (pmem_addr), .clk (clk_sys), .din (pmem_din[15:8]), .dout (pmem_dout[15:8]), .en (pmem_cen), .we (pmem_wen[1]) ); rom_8x2k_lo rom_8x2k_lo_0 ( .addr (pmem_addr), .clk (clk_sys), .din (pmem_din[7:0]), .dout (pmem_dout[7:0]), .en (pmem_cen), .we (pmem_wen[0]) ); //============================================================================= // 7) I/O CELLS //============================================================================= // Slide Switches (Port 1 inputs) //-------------------------------- IBUF SW7_PIN (.O(p3_din[7]), .I(SW7)); IBUF SW6_PIN (.O(p3_din[6]), .I(SW6)); IBUF SW5_PIN (.O(p3_din[5]), .I(SW5)); IBUF SW4_PIN (.O(p3_din[4]), .I(SW4)); IBUF SW3_PIN (.O(p3_din[3]), .I(SW3)); IBUF SW2_PIN (.O(p3_din[2]), .I(SW2)); IBUF SW1_PIN (.O(p3_din[1]), .I(SW1)); IBUF SW0_PIN (.O(p3_din[0]), .I(SW0)); // LEDs (Port 1 outputs) //----------------------- OBUF LED7_PIN (.I(p3_dout[7] & p3_dout_en[7]), .O(LED7)); OBUF LED6_PIN (.I(p3_dout[6] & p3_dout_en[6]), .O(LED6)); OBUF LED5_PIN (.I(p3_dout[5] & p3_dout_en[5]), .O(LED5)); OBUF LED4_PIN (.I(p3_dout[4] & p3_dout_en[4]), .O(LED4)); OBUF LED3_PIN (.I(p3_dout[3] & p3_dout_en[3]), .O(LED3)); OBUF LED2_PIN (.I(p3_dout[2] & p3_dout_en[2]), .O(LED2)); OBUF LED1_PIN (.I(p3_dout[1] & p3_dout_en[1]), .O(LED1)); OBUF LED0_PIN (.I(p3_dout[0] & p3_dout_en[0]), .O(LED0)); // Push Button Switches //---------------------- IBUF BTN2_PIN (.O(), .I(BTN2)); IBUF BTN1_PIN (.O(), .I(BTN1)); IBUF BTN0_PIN (.O(), .I(BTN0)); // Four-Sigit, Seven-Segment LED Display //--------------------------------------- OBUF SEG_A_PIN (.I(seg_a_), .O(SEG_A)); OBUF SEG_B_PIN (.I(seg_b_), .O(SEG_B)); OBUF SEG_C_PIN (.I(seg_c_), .O(SEG_C)); OBUF SEG_D_PIN (.I(seg_d_), .O(SEG_D)); OBUF SEG_E_PIN (.I(seg_e_), .O(SEG_E)); OBUF SEG_F_PIN (.I(seg_f_), .O(SEG_F)); OBUF SEG_G_PIN (.I(seg_g_), .O(SEG_G)); OBUF SEG_DP_PIN (.I(seg_dp_), .O(SEG_DP)); OBUF SEG_AN0_PIN (.I(seg_an0_), .O(SEG_AN0)); OBUF SEG_AN1_PIN (.I(seg_an1_), .O(SEG_AN1)); OBUF SEG_AN2_PIN (.I(seg_an2_), .O(SEG_AN2)); OBUF SEG_AN3_PIN (.I(seg_an3_), .O(SEG_AN3)); // RS-232 Port //---------------------- // P1.1 (TX) and P2.2 (RX) assign p1_io_din = 8'h00; assign p2_io_din[7:3] = 5'h00; assign p2_io_din[1:0] = 2'h0; // Mux the RS-232 port between: // - GPIO port P1.1 (TX) / P2.2 (RX) // - the debug interface. // - the simple hardware UART // // The mux is controlled with the SW0/SW1 switches: // 00 = debug interface // 01 = GPIO // 10 = simple hardware uart // 11 = debug interface wire sdi_select = ({p3_din[1], p3_din[0]}==2'b00) | ({p3_din[1], p3_din[0]}==2'b11); wire gpio_select = ({p3_din[1], p3_din[0]}==2'b01); wire uart_select = ({p3_din[1], p3_din[0]}==2'b10); wire uart_txd_out = gpio_select ? p1_io_dout[1] : uart_select ? hw_uart_txd : dbg_uart_txd; wire uart_rxd_in; assign p2_io_din[2] = gpio_select ? uart_rxd_in : 1'b1; assign hw_uart_rxd = uart_select ? uart_rxd_in : 1'b1; assign dbg_uart_rxd = sdi_select ? uart_rxd_in : 1'b1; IBUF UART_RXD_PIN (.O(uart_rxd_in), .I(UART_RXD)); OBUF UART_TXD_PIN (.I(uart_txd_out), .O(UART_TXD)); IBUF UART_RXD_A_PIN (.O(), .I(UART_RXD_A)); OBUF UART_TXD_A_PIN (.I(1'b0), .O(UART_TXD_A)); // PS/2 Mouse/Keyboard Port //-------------------------- IOBUF PS2_D_PIN (.O(), .I(1'b0), .T(1'b1), .IO(PS2_D)); OBUF PS2_C_PIN (.I(1'b0), .O(PS2_C)); // Fast, Asynchronous SRAM //-------------------------- OBUF SRAM_A17_PIN (.I(1'b0), .O(SRAM_A17)); OBUF SRAM_A16_PIN (.I(1'b0), .O(SRAM_A16)); OBUF SRAM_A15_PIN (.I(1'b0), .O(SRAM_A15)); OBUF SRAM_A14_PIN (.I(1'b0), .O(SRAM_A14)); OBUF SRAM_A13_PIN (.I(1'b0), .O(SRAM_A13)); OBUF SRAM_A12_PIN (.I(1'b0), .O(SRAM_A12)); OBUF SRAM_A11_PIN (.I(1'b0), .O(SRAM_A11)); OBUF SRAM_A10_PIN (.I(1'b0), .O(SRAM_A10)); OBUF SRAM_A9_PIN (.I(1'b0), .O(SRAM_A9)); OBUF SRAM_A8_PIN (.I(1'b0), .O(SRAM_A8)); OBUF SRAM_A7_PIN (.I(1'b0), .O(SRAM_A7)); OBUF SRAM_A6_PIN (.I(1'b0), .O(SRAM_A6)); OBUF SRAM_A5_PIN (.I(1'b0), .O(SRAM_A5)); OBUF SRAM_A4_PIN (.I(1'b0), .O(SRAM_A4)); OBUF SRAM_A3_PIN (.I(1'b0), .O(SRAM_A3)); OBUF SRAM_A2_PIN (.I(1'b0), .O(SRAM_A2)); OBUF SRAM_A1_PIN (.I(1'b0), .O(SRAM_A1)); OBUF SRAM_A0_PIN (.I(1'b0), .O(SRAM_A0)); OBUF SRAM_OE_PIN (.I(1'b1), .O(SRAM_OE)); OBUF SRAM_WE_PIN (.I(1'b1), .O(SRAM_WE)); IOBUF SRAM0_IO15_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO15)); IOBUF SRAM0_IO14_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO14)); IOBUF SRAM0_IO13_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO13)); IOBUF SRAM0_IO12_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO12)); IOBUF SRAM0_IO11_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO11)); IOBUF SRAM0_IO10_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO10)); IOBUF SRAM0_IO9_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO9)); IOBUF SRAM0_IO8_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO8)); IOBUF SRAM0_IO7_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO7)); IOBUF SRAM0_IO6_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO6)); IOBUF SRAM0_IO5_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO5)); IOBUF SRAM0_IO4_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO4)); IOBUF SRAM0_IO3_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO3)); IOBUF SRAM0_IO2_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO2)); IOBUF SRAM0_IO1_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO1)); IOBUF SRAM0_IO0_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM0_IO0)); OBUF SRAM0_CE1_PIN (.I(1'b1), .O(SRAM0_CE1)); OBUF SRAM0_UB1_PIN (.I(1'b1), .O(SRAM0_UB1)); OBUF SRAM0_LB1_PIN (.I(1'b1), .O(SRAM0_LB1)); IOBUF SRAM1_IO15_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO15)); IOBUF SRAM1_IO14_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO14)); IOBUF SRAM1_IO13_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO13)); IOBUF SRAM1_IO12_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO12)); IOBUF SRAM1_IO11_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO11)); IOBUF SRAM1_IO10_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO10)); IOBUF SRAM1_IO9_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO9)); IOBUF SRAM1_IO8_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO8)); IOBUF SRAM1_IO7_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO7)); IOBUF SRAM1_IO6_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO6)); IOBUF SRAM1_IO5_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO5)); IOBUF SRAM1_IO4_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO4)); IOBUF SRAM1_IO3_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO3)); IOBUF SRAM1_IO2_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO2)); IOBUF SRAM1_IO1_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO1)); IOBUF SRAM1_IO0_PIN (.O(), .I(1'b0), .T(1'b1), .IO(SRAM1_IO0)); OBUF SRAM1_CE2_PIN (.I(1'b1), .O(SRAM1_CE2)); OBUF SRAM1_UB2_PIN (.I(1'b1), .O(SRAM1_UB2)); OBUF SRAM1_LB2_PIN (.I(1'b1), .O(SRAM1_LB2)); // VGA Port //--------------------------------------- OBUF VGA_R_PIN (.I(1'b0), .O(VGA_R)); OBUF VGA_G_PIN (.I(1'b0), .O(VGA_G)); OBUF VGA_B_PIN (.I(1'b0), .O(VGA_B)); OBUF VGA_HS_PIN (.I(1'b0), .O(VGA_HS)); OBUF VGA_VS_PIN (.I(1'b0), .O(VGA_VS)); endmodule // openMSP430_fpga
Go to most recent revision | Compare with Previous | Blame | View Log