OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_diligent_s3board/] [software/] [leds/] [7seg.c] - Rev 222

Go to most recent revision | Compare with Previous | Blame | View Log

/*
*********************************************************************************************************
*
* Multiplexed LED Display Driver
*
* (c) Copyright 2004, modified by John Leung
* Reference: Jean J. Labrosse, Embedded Systems Building Blocks
* All Rights Reserved
*
* Filename : LED.C
* Programmer : John Leung
* Remarks : Modified for SaiWanHo project
* Date : 19th Nov 2004
* Hardware : PCB 11OCT2004.001
*********************************************************************************************************
* DESCRIPTION
*
* This module provides an interface to a multiplexed "8 segments x N digits" LED matrix.
*
* To use this driver:
*
* 1) You must define (LED.H):
*
* DISP_N_DIG The total number of segments to display, inc. dp status
* DISP_N_SS The total number of seven-segment digits (modules)
* DISP_PORT1_DIG The address of the DIGITS output port
* DISP_PORT_SEG The address of the SEGMENTS output port
* first_dig_msk The first digit mask for selecting the most significant digit
*
* 2) You must allocate a hardware timer which will interrupt the CPU at a rate of at least:
*
* DISP_N_DIG * 60 (Hz)
*
* The timer interrupt must vector to DispMuxISR (defined in LED_IA.ASM). You MUST write the
* code to clear the interrupt source. The interrupt source must be cleared either in DispMuxISR
* or in DispMuxHandler().
*
* 3) Adapt DispInitPort(), DispOutSeg() and DispOutDig() for your environment.
*********************************************************************************************************
*/
#include "7seg.h"
 
/*
*********************************************************************************************************
* SEVEN-SEGMENT Digit table
*********************************************************************************************************
*/
 
INT8U * const DispSegTbl[] = {
  (INT8U *) &DIGIT3,
  (INT8U *) &DIGIT2,
  (INT8U *) &DIGIT1,
  (INT8U *) &DIGIT0
};
 
/*
*********************************************************************************************************
* ASCII to SEVEN-SEGMENT conversion table
* a
* ------
* f | | b
* | g |
* Note: The segments are mapped as follows: ------
* e | | c
* a b c d e f g | d |
* -- -- -- -- -- -- -- -- ------
* B7 B6 B5 B4 B3 B2 B1 B0
*********************************************************************************************************
*/
 
const INT8U DispASCIItoSegTbl[] = {// ASCII to SEVEN-SEGMENT conversion table
0x00, // ' '
0x00, // '!', No seven-segment conversion for exclamation point
0x44, // '"', Double quote
0x00, // '#', Pound sign
0x00, // '$', No seven-segment conversion for dollar sign
0x00, // '%', No seven-segment conversion for percent sign
0x00, // '&', No seven-segment conversion for ampersand
0x40, // ''', Single quote
0x9C, // '(', Same as '['
0xF0, // ')', Same as ']'
0x00, // '*', No seven-segment conversion for asterix
0x00, // '+', No seven-segment conversion for plus sign
0x00, // ',', No seven-segment conversion for comma
0x02, // '-', Minus sign
0x00, // '.', No seven-segment conversion for period
0x00, // '/', No seven-segment conversion for slash
0xFC, // '0'
0x60, // '1'
0xDA, // '2'
0xF2, // '3'
0x66, // '4'
0xB6, // '5'
0xBE, // '6'
0xE0, // '7'
0xFE, // '8'
0xF6, // '9'
0x00, // ':', No seven-segment conversion for colon
0x00, // ';', No seven-segment conversion for semi-colon
0x00, // '<', No seven-segment conversion for less-than sign
0x12, // '=', Equal sign
0x00, // '>', No seven-segment conversion for greater-than sign
0xCA, //'?', Question mark
0x00, // '@', No seven-segment conversion for commercial at-sign
0xEE, // 'A'
0x3E, // 'B', Actually displayed as 'b'
0x9C, // 'C'
0x7A, // 'D', Actually displayed as 'd'
0x9E, // 'E'
0x8E, // 'F'
0xBC, // 'G', Actually displayed as 'g'
0x6E, // 'H'
0x60, // 'I', Same as '1'
0x78, // 'J'
0x00, // 'K', No seven-segment conversion
0x1C, // 'L'
0x6E, // 'M', No seven-segment conversion
0x2A, // 'N', Actually displayed as 'n'
0xFC, // 'O', Same as '0'
0xCE, // 'P'
0x00, // 'Q', No seven-segment conversion
0x0A, // 'R', Actually displayed as 'r'
0xB6, // 'S', Same as '5'
0x1E, // 'T', Actually displayed as 't'
0x7C, // 'U'
0x00, // 'V', No seven-segment conversion
0x00, // 'W', No seven-segment conversion
0x00, // 'X', No seven-segment conversion
0x76, // 'Y'
0x00, // 'Z', No seven-segment conversion
0x00, // '['
0x00, // '\', No seven-segment conversion
0x00, // ']'
0x00, // '^', No seven-segment conversion
0x00, // '_', Underscore
0x00, // '`', No seven-segment conversion for reverse quote
0xFA, // 'a'
0x3E, // 'b'
0x1A, // 'c'
0x7A, // 'd'
0xDE, // 'e'
0x8E, // 'f', Actually displayed as 'F'
0xBC, // 'g'
0x2E, // 'h'
0x20, // 'i'
0x78, // 'j', Actually displayed as 'J'
0x00, // 'k', No seven-segment conversion
0x1C, // 'l', Actually displayed as 'L'
0x00, // 'm', No seven-segment conversion
0x2A, // 'n'
0x3A, // 'o'
0xCE, // 'p', Actually displayed as 'P'
0x00, // 'q', No seven-segment conversion
0x0A, // 'r'
0xB6, // 's', Actually displayed as 'S'
0x1E, // 't'
0x38, // 'u'
0x00, // 'v', No seven-segment conversion
0x00, // 'w', No seven-segment conversion
0x00, // 'x', No seven-segment conversion
0x76, // 'y', Actually displayed as 'Y'
0x00 // 'z', No seven-segment conversion
};
 
/*
*********************************************************************************************************
* DISPLAY ASCII STRING ON SEVEN-SEGMENT DISPLAY
*
* Description: This function is called to display an ASCII string on the seven-segment display.
* Arguments : dig is the position of the first digit where the string will appear:
* 0 for the first seven-segment digit.
* 1 for the second seven-segment digit.
* . . . . . . .
* . . . . . . .
* DISP_N_SS - 1 is the last seven-segment digit.
* s is the ASCII string to display
* Returns : none
* Notes : - Not all ASCII characters can be displayed on a seven-segment display. Consult the
* ASCII to seven-segment conversion table DispASCIItoSegTbl[].
*********************************************************************************************************
*/
 
void DispStr (INT8U offset, INT8U *s)
{
  int dig        = 0;
  register INT8U* p;
  register INT8U c;
  while (dig < DIGIT_NR) {
    p = DispSegTbl[dig];
    c = *(offset+s);
    *p = DispASCIItoSegTbl[c - 0x20];
    dig++;
    s++;
  }
}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.