OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [fpga/] [xilinx_diligent_s3board/] [software/] [leds/] [omsp_system.h] - Rev 202

Go to most recent revision | Compare with Previous | Blame | View Log

/*===========================================================================*/
/* Copyright (C) 2001 Authors                                                */
/*                                                                           */
/* This source file may be used and distributed without restriction provided */
/* that this copyright statement is not removed from the file and that any   */
/* derivative work contains the original copyright notice and the associated */
/* disclaimer.                                                               */
/*                                                                           */
/* This source file is free software; you can redistribute it and/or modify  */
/* it under the terms of the GNU Lesser General Public License as published  */
/* by the Free Software Foundation; either version 2.1 of the License, or    */
/* (at your option) any later version.                                       */
/*                                                                           */
/* This source is distributed in the hope that it will be useful, but WITHOUT*/
/* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or     */
/* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public       */
/* License for more details.                                                 */
/*                                                                           */
/* You should have received a copy of the GNU Lesser General Public License  */
/* along with this source; if not, write to the Free Software Foundation,    */
/* Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA        */
/*                                                                           */
/*===========================================================================*/
/*                          OMSP_SYSTEM HEADER FILE                          */
/*---------------------------------------------------------------------------*/
/*                                                                           */
/* Author(s):                                                                */
/*             - Olivier Girard,    olgirard@gmail.com                       */
/*                                                                           */
/*---------------------------------------------------------------------------*/
/* $Rev: 19 $                                                                */
/* $LastChangedBy: olivier.girard $                                          */
/* $LastChangedDate: 2009-08-04 23:47:15 +0200 (Tue, 04 Aug 2009) $          */
/*===========================================================================*/
 
#include <in430.h>
 
//=============================================================================
// STATUS REGISTER BITS
//=============================================================================
 
// Flags
#define C             (0x0001)
#define Z             (0x0002)
#define N             (0x0004)
#define V             (0x0100)
#define GIE           (0x0008)
#define CPUOFF        (0x0010)
#define OSCOFF        (0x0020)
#define SCG0          (0x0040)
#define SCG1          (0x0080)
 
// Low Power Modes coded with Bits 4-7 in SR
#define LPM0_bits     (CPUOFF)
#define LPM1_bits     (SCG0+CPUOFF)
#define LPM2_bits     (SCG1+CPUOFF)
#define LPM3_bits     (SCG1+SCG0+CPUOFF)
#define LPM4_bits     (SCG1+SCG0+OSCOFF+CPUOFF)
 
#define LPM0          _BIS_SR(LPM0_bits)       // Enter Low Power Mode 0
#define LPM0_EXIT     _BIC_SR_IRQ(LPM0_bits)   // Exit  Low Power Mode 0
#define LPM1          _BIS_SR(LPM1_bits)       // Enter Low Power Mode 1
#define LPM1_EXIT     _BIC_SR_IRQ(LPM1_bits)   // Exit  Low Power Mode 1
#define LPM2          _BIS_SR(LPM2_bits)       // Enter Low Power Mode 2
#define LPM2_EXIT     _BIC_SR_IRQ(LPM2_bits)   // Exit  Low Power Mode 2
#define LPM3          _BIS_SR(LPM3_bits)       // Enter Low Power Mode 3
#define LPM3_EXIT     _BIC_SR_IRQ(LPM3_bits)   // Exit  Low Power Mode 3
#define LPM4          _BIS_SR(LPM4_bits)       // Enter Low Power Mode 4
#define LPM4_EXIT     _BIC_SR_IRQ(LPM4_bits)   // Exit  Low Power Mode 4
 
 
//=============================================================================
// PERIPHERALS REGISTER DEFINITIONS
//=============================================================================
 
//----------------------------------------------------------
// SPECIAL FUNCTION REGISTERS
//----------------------------------------------------------
#define  IE1         (*(volatile unsigned char *) 0x0000)
#define  IFG1        (*(volatile unsigned char *) 0x0002)
 
#define  CPU_ID_LO   (*(volatile unsigned char *) 0x0004)
#define  CPU_ID_HI   (*(volatile unsigned char *) 0x0006)
 
 
//----------------------------------------------------------
// GPIOs
//----------------------------------------------------------
#define  P1IN        (*(volatile unsigned char *) 0x0020)
#define  P1OUT       (*(volatile unsigned char *) 0x0021)
#define  P1DIR       (*(volatile unsigned char *) 0x0022)
#define  P1IFG       (*(volatile unsigned char *) 0x0023)
#define  P1IES       (*(volatile unsigned char *) 0x0024)
#define  P1IE        (*(volatile unsigned char *) 0x0025)
#define  P1SEL       (*(volatile unsigned char *) 0x0026)
 
#define  P2IN        (*(volatile unsigned char *) 0x0028)
#define  P2OUT       (*(volatile unsigned char *) 0x0029)
#define  P2DIR       (*(volatile unsigned char *) 0x002A)
#define  P2IFG       (*(volatile unsigned char *) 0x002B)
#define  P2IES       (*(volatile unsigned char *) 0x002C)
#define  P2IE        (*(volatile unsigned char *) 0x002D)
#define  P2SEL       (*(volatile unsigned char *) 0x002E)
 
#define  P3IN        (*(volatile unsigned char *) 0x0018)
#define  P3OUT       (*(volatile unsigned char *) 0x0019)
#define  P3DIR       (*(volatile unsigned char *) 0x001A)
#define  P3SEL       (*(volatile unsigned char *) 0x001B)
 
#define  P4IN        (*(volatile unsigned char *) 0x001C)
#define  P4OUT       (*(volatile unsigned char *) 0x001D)
#define  P4DIR       (*(volatile unsigned char *) 0x001E)
#define  P4SEL       (*(volatile unsigned char *) 0x001F)
 
#define  P5IN        (*(volatile unsigned char *) 0x0030)
#define  P5OUT       (*(volatile unsigned char *) 0x0031)
#define  P5DIR       (*(volatile unsigned char *) 0x0032)
#define  P5SEL       (*(volatile unsigned char *) 0x0033)
 
#define  P6IN        (*(volatile unsigned char *) 0x0034)
#define  P6OUT       (*(volatile unsigned char *) 0x0035)
#define  P6DIR       (*(volatile unsigned char *) 0x0036)
#define  P6SEL       (*(volatile unsigned char *) 0x0037)
 
 
//----------------------------------------------------------
// BASIC CLOCK MODULE
//----------------------------------------------------------
#define  DCOCTL      (*(volatile unsigned char *) 0x0056)
#define  BCSCTL1     (*(volatile unsigned char *) 0x0057)
#define  BCSCTL2     (*(volatile unsigned char *) 0x0058)
 
 
//----------------------------------------------------------
// WATCHDOG TIMER
//----------------------------------------------------------
 
// Addresses
#define  WDTCTL      (*(volatile unsigned int  *) 0x0120)
 
// Bit masks
#define  WDTIS0      (0x0001)
#define  WDTIS1      (0x0002)
#define  WDTSSEL     (0x0004)
#define  WDTCNTCL    (0x0008)
#define  WDTTMSEL    (0x0010)
#define  WDTNMI      (0x0020)
#define  WDTNMIES    (0x0040)
#define  WDTHOLD     (0x0080)
#define  WDTPW       (0x5A00)
 
 
//----------------------------------------------------------
// HARDWARE MULTIPLIER
//----------------------------------------------------------
#define  OP1_MPY     (*(volatile unsigned int  *) 0x0130)
#define  OP1_MPYS    (*(volatile unsigned int  *) 0x0132)
#define  OP1_MAC     (*(volatile unsigned int  *) 0x0134)
#define  OP1_MACS    (*(volatile unsigned int  *) 0x0136)
#define  OP2         (*(volatile unsigned int  *) 0x0138)
 
#define  RESLO       (*(volatile unsigned int  *) 0x013A)
#define  RESHI       (*(volatile unsigned int  *) 0x013C)
#define  SUMEXT      (*(volatile unsigned int  *) 0x013E)
 
 
//----------------------------------------------------------
// TIMER A
//----------------------------------------------------------
#define  TACTL       (*(volatile unsigned int  *) 0x0160)
#define  TAR         (*(volatile unsigned int  *) 0x0170)
#define  TACCTL0     (*(volatile unsigned int  *) 0x0162)
#define  TACCR0      (*(volatile unsigned int  *) 0x0172)
#define  TACCTL1     (*(volatile unsigned int  *) 0x0164)
#define  TACCR1      (*(volatile unsigned int  *) 0x0174)
#define  TACCTL2     (*(volatile unsigned int  *) 0x0166)
#define  TACCR2      (*(volatile unsigned int  *) 0x0176)
#define  TAIV        (*(volatile unsigned int  *) 0x012E)
 
// Alternate register names
#define CCTL0        TACCTL0
#define CCTL1        TACCTL1
#define CCR0         TACCR0
#define CCR1         TACCR1
 
// Bit-masks
#define TASSEL1             (0x0200)  /* Timer A clock source select 1 */
#define TASSEL0             (0x0100)  /* Timer A clock source select 0 */
#define ID1                 (0x0080)  /* Timer A clock input divider 1 */
#define ID0                 (0x0040)  /* Timer A clock input divider 0 */
#define MC1                 (0x0020)  /* Timer A mode control 1 */
#define MC0                 (0x0010)  /* Timer A mode control 0 */
#define TACLR               (0x0004)  /* Timer A counter clear */
#define TAIE                (0x0002)  /* Timer A counter interrupt enable */
#define TAIFG               (0x0001)  /* Timer A counter interrupt flag */
 
#define MC_0                (0x0000)  /* Timer A mode control: 0 - Stop */
#define MC_1                (0x0010)  /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2                (0x0020)  /* Timer A mode control: 2 - Continous up */
#define MC_3                (0x0030)  /* Timer A mode control: 3 - Up/Down */
#define ID_0                (0x0000)  /* Timer A input divider: 0 - /1 */
#define ID_1                (0x0040)  /* Timer A input divider: 1 - /2 */
#define ID_2                (0x0080)  /* Timer A input divider: 2 - /4 */
#define ID_3                (0x00C0)  /* Timer A input divider: 3 - /8 */
#define TASSEL_0            (0x0000)  /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1            (0x0100)  /* Timer A clock source select: 1 - ACLK  */
#define TASSEL_2            (0x0200)  /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3            (0x0300)  /* Timer A clock source select: 3 - INCLK */
 
#define CM1                 (0x8000)  /* Capture mode 1 */
#define CM0                 (0x4000)  /* Capture mode 0 */
#define CCIS1               (0x2000)  /* Capture input select 1 */
#define CCIS0               (0x1000)  /* Capture input select 0 */
#define SCS                 (0x0800)  /* Capture sychronize */
#define SCCI                (0x0400)  /* Latched capture signal (read) */
#define CAP                 (0x0100)  /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2             (0x0080)  /* Output mode 2 */
#define OUTMOD1             (0x0040)  /* Output mode 1 */
#define OUTMOD0             (0x0020)  /* Output mode 0 */
#define CCIE                (0x0010)  /* Capture/compare interrupt enable */
#define CCI                 (0x0008)  /* Capture input signal (read) */
#define OUT                 (0x0004)  /* PWM Output signal if output mode 0 */
#define COV                 (0x0002)  /* Capture/compare overflow flag */
#define CCIFG               (0x0001)  /* Capture/compare interrupt flag */
 
 
//=============================================================================
// INTERRUPT VECTORS
//=============================================================================
#define interrupt(x) void __attribute__((interrupt (x)))
#define wakeup  __attribute__((wakeup))
#define eint()  __eint()
#define dint()  __dint()
 
#define RESET_VECTOR        (0x001E)   // Vector 15  (0xFFFE) - Reset              -  [Highest Priority]
#define NMI_VECTOR          (0x001C)   // Vector 14  (0xFFFC) - Non-maskable       -
#define UNUSED_13_VECTOR    (0x001A)   // Vector 13  (0xFFFA) -                    -
#define UNUSED_12_VECTOR    (0x0018)   // Vector 12  (0xFFF8) -                    -
#define UNUSED_11_VECTOR    (0x0016)   // Vector 11  (0xFFF6) -                    -
#define WDT_VECTOR          (0x0014)   // Vector 10  (0xFFF4) - Watchdog Timer     -
#define TIMERA0_VECTOR      (0x0012)   // Vector  9  (0xFFF2) - Timer A CC0        -
#define TIMERA1_VECTOR      (0x0010)   // Vector  8  (0xFFF0) - Timer A CC1-2, TA  -
#define UNUSED_07_VECTOR    (0x000E)   // Vector  7  (0xFFEE) -                    -
#define UNUSED_06_VECTOR    (0x000C)   // Vector  6  (0xFFEC) -                    -
#define UNUSED_05_VECTOR    (0x000A)   // Vector  5  (0xFFEA) -                    -
#define UNUSED_04_VECTOR    (0x0008)   // Vector  4  (0xFFE8) -                    -
#define UNUSED_03_VECTOR    (0x0006)   // Vector  3  (0xFFE6) -                    -
#define PORT1_VECTOR        (0x0004)   // Vector  2  (0xFFE4) - Port 1             -
#define UNUSED_01_VECTOR    (0x0002)   // Vector  1  (0xFFE2) -                    -
#define UNUSED_00_VECTOR    (0x0000)   // Vector  0  (0xFFE0) -                    -  [Lowest Priority]
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.