URL
https://opencores.org/ocsvn/openmsp430/openmsp430/trunk
Subversion Repositories openmsp430
[/] [openmsp430/] [trunk/] [fpga/] [xilinx_diligent_s3board/] [software/] [leds/] [omsp_system.h] - Rev 222
Go to most recent revision | Compare with Previous | Blame | View Log
/*===========================================================================*/ /* Copyright (C) 2001 Authors */ /* */ /* This source file may be used and distributed without restriction provided */ /* that this copyright statement is not removed from the file and that any */ /* derivative work contains the original copyright notice and the associated */ /* disclaimer. */ /* */ /* This source file is free software; you can redistribute it and/or modify */ /* it under the terms of the GNU Lesser General Public License as published */ /* by the Free Software Foundation; either version 2.1 of the License, or */ /* (at your option) any later version. */ /* */ /* This source is distributed in the hope that it will be useful, but WITHOUT*/ /* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or */ /* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public */ /* License for more details. */ /* */ /* You should have received a copy of the GNU Lesser General Public License */ /* along with this source; if not, write to the Free Software Foundation, */ /* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /* */ /*===========================================================================*/ /* OMSP_SYSTEM HEADER FILE */ /*---------------------------------------------------------------------------*/ /* */ /* Author(s): */ /* - Olivier Girard, olgirard@gmail.com */ /* */ /*---------------------------------------------------------------------------*/ /* $Rev: 19 $ */ /* $LastChangedBy: olivier.girard $ */ /* $LastChangedDate: 2009-08-04 23:47:15 +0200 (Tue, 04 Aug 2009) $ */ /*===========================================================================*/ #include <in430.h> //============================================================================= // STATUS REGISTER BITS //============================================================================= // Flags #define C (0x0001) #define Z (0x0002) #define N (0x0004) #define V (0x0100) #define GIE (0x0008) #define CPUOFF (0x0010) #define OSCOFF (0x0020) #define SCG0 (0x0040) #define SCG1 (0x0080) // Low Power Modes coded with Bits 4-7 in SR #define LPM0_bits (CPUOFF) #define LPM1_bits (SCG0+CPUOFF) #define LPM2_bits (SCG1+CPUOFF) #define LPM3_bits (SCG1+SCG0+CPUOFF) #define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF) #define LPM0 _BIS_SR(LPM0_bits) // Enter Low Power Mode 0 #define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) // Exit Low Power Mode 0 #define LPM1 _BIS_SR(LPM1_bits) // Enter Low Power Mode 1 #define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) // Exit Low Power Mode 1 #define LPM2 _BIS_SR(LPM2_bits) // Enter Low Power Mode 2 #define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) // Exit Low Power Mode 2 #define LPM3 _BIS_SR(LPM3_bits) // Enter Low Power Mode 3 #define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) // Exit Low Power Mode 3 #define LPM4 _BIS_SR(LPM4_bits) // Enter Low Power Mode 4 #define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) // Exit Low Power Mode 4 //============================================================================= // PERIPHERALS REGISTER DEFINITIONS //============================================================================= //---------------------------------------------------------- // SPECIAL FUNCTION REGISTERS //---------------------------------------------------------- #define IE1_set_wdtie() __asm__ __volatile__ ("bis.b #0x01, &0x0000") //#define IE1 (*(volatile unsigned char *) 0x0000) #define IFG1 (*(volatile unsigned char *) 0x0002) #define CPU_ID_LO (*(volatile unsigned char *) 0x0004) #define CPU_ID_HI (*(volatile unsigned char *) 0x0006) //---------------------------------------------------------- // GPIOs //---------------------------------------------------------- #define P1IN (*(volatile unsigned char *) 0x0020) #define P1OUT (*(volatile unsigned char *) 0x0021) #define P1DIR (*(volatile unsigned char *) 0x0022) #define P1IFG (*(volatile unsigned char *) 0x0023) #define P1IES (*(volatile unsigned char *) 0x0024) #define P1IE (*(volatile unsigned char *) 0x0025) #define P1SEL (*(volatile unsigned char *) 0x0026) #define P2IN (*(volatile unsigned char *) 0x0028) #define P2OUT (*(volatile unsigned char *) 0x0029) #define P2DIR (*(volatile unsigned char *) 0x002A) #define P2IFG (*(volatile unsigned char *) 0x002B) #define P2IES (*(volatile unsigned char *) 0x002C) #define P2IE (*(volatile unsigned char *) 0x002D) #define P2SEL (*(volatile unsigned char *) 0x002E) #define P3IN (*(volatile unsigned char *) 0x0018) #define P3OUT (*(volatile unsigned char *) 0x0019) #define P3DIR (*(volatile unsigned char *) 0x001A) #define P3SEL (*(volatile unsigned char *) 0x001B) #define P4IN (*(volatile unsigned char *) 0x001C) #define P4OUT (*(volatile unsigned char *) 0x001D) #define P4DIR (*(volatile unsigned char *) 0x001E) #define P4SEL (*(volatile unsigned char *) 0x001F) #define P5IN (*(volatile unsigned char *) 0x0030) #define P5OUT (*(volatile unsigned char *) 0x0031) #define P5DIR (*(volatile unsigned char *) 0x0032) #define P5SEL (*(volatile unsigned char *) 0x0033) #define P6IN (*(volatile unsigned char *) 0x0034) #define P6OUT (*(volatile unsigned char *) 0x0035) #define P6DIR (*(volatile unsigned char *) 0x0036) #define P6SEL (*(volatile unsigned char *) 0x0037) //---------------------------------------------------------- // BASIC CLOCK MODULE //---------------------------------------------------------- #define DCOCTL (*(volatile unsigned char *) 0x0056) #define BCSCTL1 (*(volatile unsigned char *) 0x0057) #define BCSCTL2 (*(volatile unsigned char *) 0x0058) //---------------------------------------------------------- // WATCHDOG TIMER //---------------------------------------------------------- // Addresses #define WDTCTL (*(volatile unsigned int *) 0x0120) // Bit masks #define WDTIS0 (0x0001) #define WDTIS1 (0x0002) #define WDTSSEL (0x0004) #define WDTCNTCL (0x0008) #define WDTTMSEL (0x0010) #define WDTNMI (0x0020) #define WDTNMIES (0x0040) #define WDTHOLD (0x0080) #define WDTPW (0x5A00) //---------------------------------------------------------- // HARDWARE MULTIPLIER //---------------------------------------------------------- #define OP1_MPY (*(volatile unsigned int *) 0x0130) #define OP1_MPYS (*(volatile unsigned int *) 0x0132) #define OP1_MAC (*(volatile unsigned int *) 0x0134) #define OP1_MACS (*(volatile unsigned int *) 0x0136) #define OP2 (*(volatile unsigned int *) 0x0138) #define RESLO (*(volatile unsigned int *) 0x013A) #define RESHI (*(volatile unsigned int *) 0x013C) #define SUMEXT (*(volatile unsigned int *) 0x013E) //---------------------------------------------------------- // TIMER A //---------------------------------------------------------- #define TACTL (*(volatile unsigned int *) 0x0160) #define TAR (*(volatile unsigned int *) 0x0170) #define TACCTL0 (*(volatile unsigned int *) 0x0162) #define TACCR0 (*(volatile unsigned int *) 0x0172) #define TACCTL1 (*(volatile unsigned int *) 0x0164) #define TACCR1 (*(volatile unsigned int *) 0x0174) #define TACCTL2 (*(volatile unsigned int *) 0x0166) #define TACCR2 (*(volatile unsigned int *) 0x0176) #define TAIV (*(volatile unsigned int *) 0x012E) // Alternate register names #define CCTL0 TACCTL0 #define CCTL1 TACCTL1 #define CCR0 TACCR0 #define CCR1 TACCR1 // Bit-masks #define TASSEL1 (0x0200) /* Timer A clock source select 1 */ #define TASSEL0 (0x0100) /* Timer A clock source select 0 */ #define ID1 (0x0080) /* Timer A clock input divider 1 */ #define ID0 (0x0040) /* Timer A clock input divider 0 */ #define MC1 (0x0020) /* Timer A mode control 1 */ #define MC0 (0x0010) /* Timer A mode control 0 */ #define TACLR (0x0004) /* Timer A counter clear */ #define TAIE (0x0002) /* Timer A counter interrupt enable */ #define TAIFG (0x0001) /* Timer A counter interrupt flag */ #define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */ #define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */ #define MC_2 (0x0020) /* Timer A mode control: 2 - Continous up */ #define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */ #define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */ #define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */ #define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */ #define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */ #define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */ #define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */ #define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */ #define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */ #define CM1 (0x8000) /* Capture mode 1 */ #define CM0 (0x4000) /* Capture mode 0 */ #define CCIS1 (0x2000) /* Capture input select 1 */ #define CCIS0 (0x1000) /* Capture input select 0 */ #define SCS (0x0800) /* Capture sychronize */ #define SCCI (0x0400) /* Latched capture signal (read) */ #define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */ #define OUTMOD2 (0x0080) /* Output mode 2 */ #define OUTMOD1 (0x0040) /* Output mode 1 */ #define OUTMOD0 (0x0020) /* Output mode 0 */ #define CCIE (0x0010) /* Capture/compare interrupt enable */ #define CCI (0x0008) /* Capture input signal (read) */ #define OUT (0x0004) /* PWM Output signal if output mode 0 */ #define COV (0x0002) /* Capture/compare overflow flag */ #define CCIFG (0x0001) /* Capture/compare interrupt flag */ //============================================================================= // INTERRUPT VECTORS //============================================================================= #define interrupt(x) void __attribute__((interrupt (x))) #define wakeup __attribute__((wakeup)) #define eint() __eint() #define dint() __dint() // Vector definition for RedHat/TI toolchain #ifdef PFX_MSP430_ELF #define RESET_VECTOR ("reset") // Vector 15 (0xFFFE) - Reset - [Highest Priority] #define NMI_VECTOR (15) // Vector 14 (0xFFFC) - Non-maskable - #define UNUSED_13_VECTOR (14) // Vector 13 (0xFFFA) - - #define UNUSED_12_VECTOR (13) // Vector 12 (0xFFF8) - - #define UNUSED_11_VECTOR (12) // Vector 11 (0xFFF6) - - #define WDT_VECTOR (11) // Vector 10 (0xFFF4) - Watchdog Timer - #define TIMERA0_VECTOR (10) // Vector 9 (0xFFF2) - Timer A CC0 - #define TIMERA1_VECTOR (9) // Vector 8 (0xFFF0) - Timer A CC1-2, TA - #define UNUSED_07_VECTOR (8) // Vector 7 (0xFFEE) - - #define UNUSED_06_VECTOR (7) // Vector 6 (0xFFEC) - - #define UNUSED_05_VECTOR (6) // Vector 5 (0xFFEA) - - #define UNUSED_04_VECTOR (5) // Vector 4 (0xFFE8) - - #define UNUSED_03_VECTOR (4) // Vector 3 (0xFFE6) - - #define PORT1_VECTOR (3) // Vector 2 (0xFFE4) - Port 1 - #define UNUSED_01_VECTOR (2) // Vector 1 (0xFFE2) - - #define UNUSED_00_VECTOR (1) // Vector 0 (0xFFE0) - - [Lowest Priority] // Vector definition for MSPGCC toolchain #else #define RESET_VECTOR (0x001E) // Vector 15 (0xFFFE) - Reset - [Highest Priority] #define NMI_VECTOR (0x001C) // Vector 14 (0xFFFC) - Non-maskable - #define UNUSED_13_VECTOR (0x001A) // Vector 13 (0xFFFA) - - #define UNUSED_12_VECTOR (0x0018) // Vector 12 (0xFFF8) - - #define UNUSED_11_VECTOR (0x0016) // Vector 11 (0xFFF6) - - #define WDT_VECTOR (0x0014) // Vector 10 (0xFFF4) - Watchdog Timer - #define TIMERA0_VECTOR (0x0012) // Vector 9 (0xFFF2) - Timer A CC0 - #define TIMERA1_VECTOR (0x0010) // Vector 8 (0xFFF0) - Timer A CC1-2, TA - #define UNUSED_07_VECTOR (0x000E) // Vector 7 (0xFFEE) - - #define UNUSED_06_VECTOR (0x000C) // Vector 6 (0xFFEC) - - #define UNUSED_05_VECTOR (0x000A) // Vector 5 (0xFFEA) - - #define UNUSED_04_VECTOR (0x0008) // Vector 4 (0xFFE8) - - #define UNUSED_03_VECTOR (0x0006) // Vector 3 (0xFFE6) - - #define PORT1_VECTOR (0x0004) // Vector 2 (0xFFE4) - Port 1 - #define UNUSED_01_VECTOR (0x0002) // Vector 1 (0xFFE2) - - #define UNUSED_00_VECTOR (0x0000) // Vector 0 (0xFFE0) - - [Lowest Priority] #endif
Go to most recent revision | Compare with Previous | Blame | View Log