URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [branches/] [or1200_rel3/] [rtl/] [verilog/] [or1200_reg2mem.v] - Rev 797
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's reg2mem aligner //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/cores/or1k/ //// //// //// //// Description //// //// Aligns register data to memory alignment. //// //// //// //// To Do: //// //// - make it smaller and faster //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: or1200_reg2mem.v,v $ // Revision 2.0 2010/06/30 11:00:00 ORSoC // No update // // Revision 1.2 2002/03/29 15:16:56 lampret // Some of the warnings fixed. // // Revision 1.1 2002/01/03 08:16:15 lampret // New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. // // Revision 1.9 2001/10/21 17:57:16 lampret // Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. // // Revision 1.8 2001/10/19 23:28:46 lampret // Fixed some synthesis warnings. Configured with caches and MMUs. // // Revision 1.7 2001/10/14 13:12:10 lampret // MP3 version. // // Revision 1.1.1.1 2001/10/06 10:18:36 igorm // no message // // Revision 1.2 2001/08/09 13:39:33 lampret // Major clean-up. // // Revision 1.1 2001/07/20 00:46:21 lampret // Development version of RTL. Libraries are missing. // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_reg2mem(addr, lsu_op, regdata, memdata); parameter width = `OR1200_OPERAND_WIDTH; // // I/O // input [1:0] addr; input [`OR1200_LSUOP_WIDTH-1:0] lsu_op; input [width-1:0] regdata; output [width-1:0] memdata; // // Internal regs and wires // reg [7:0] memdata_hh; reg [7:0] memdata_hl; reg [7:0] memdata_lh; reg [7:0] memdata_ll; assign memdata = {memdata_hh, memdata_hl, memdata_lh, memdata_ll}; // // Mux to memdata[31:24] // always @(lsu_op or addr or regdata) begin casez({lsu_op, addr[1:0]}) // synopsys parallel_case {`OR1200_LSUOP_SB, 2'b00} : memdata_hh = regdata[7:0]; {`OR1200_LSUOP_SH, 2'b00} : memdata_hh = regdata[15:8]; default : memdata_hh = regdata[31:24]; endcase end // // Mux to memdata[23:16] // always @(lsu_op or addr or regdata) begin casez({lsu_op, addr[1:0]}) // synopsys parallel_case {`OR1200_LSUOP_SW, 2'b00} : memdata_hl = regdata[23:16]; default : memdata_hl = regdata[7:0]; endcase end // // Mux to memdata[15:8] // always @(lsu_op or addr or regdata) begin casez({lsu_op, addr[1:0]}) // synopsys parallel_case {`OR1200_LSUOP_SB, 2'b10} : memdata_lh = regdata[7:0]; default : memdata_lh = regdata[15:8]; endcase end // // Mux to memdata[7:0] // always @(regdata) memdata_ll = regdata[7:0]; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log