URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [branches/] [or1200_rel3/] [rtl/] [verilog/] [or1200_spram_32x24.v] - Rev 258
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// Generic Single-Port Synchronous RAM //// //// //// //// This file is part of memory library available from //// //// http://www.opencores.org/cvsweb.shtml/generic_memories/ //// //// //// //// Description //// //// This block is a wrapper with common single-port //// //// synchronous memory interface for different //// //// types of ASIC and FPGA RAMs. Beside universal memory //// //// interface it also provides behavioral model of generic //// //// single-port synchronous RAM. //// //// It should be used in all OPENCORES designs that want to be //// //// portable accross different target technologies and //// //// independent of target memory. //// //// //// //// Supported ASIC RAMs are: //// //// - Artisan Single-Port Sync RAM //// //// - Avant! Two-Port Sync RAM (*) //// //// - Virage Single-Port Sync RAM //// //// - Virtual Silicon Single-Port Sync RAM //// //// //// //// Supported FPGA RAMs are: //// //// - Xilinx Virtex RAMB16 //// //// - Xilinx Virtex RAMB4 //// //// - Altera LPM //// //// //// //// To Do: //// //// - xilinx rams need external tri-state logic //// //// - fix avant! two-port ram //// //// - add additional RAMs //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: or1200_spram_32x24.v,v $ // Revision 2.0 2010/06/30 11:00:00 ORSoC // Minor update: // Coding style changed. // // Revision 1.3 2005/10/19 11:37:56 jcastillo // Added support for RAMB16 Xilinx4/Spartan3 primitives // // Revision 1.2 2004/06/08 18:15:32 lampret // Changed behavior of the simulation generic models // // Revision 1.1 2004/04/08 11:00:46 simont // Add support for 512B instruction cache. // // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_spram_32x24( `ifdef OR1200_BIST // RAM BIST mbist_si_i, mbist_so_o, mbist_ctrl_i, `endif // Generic synchronous single-port RAM interface clk, rst, ce, we, oe, addr, di, doq ); // // Default address and data buses width // parameter aw = 5; parameter dw = 24; `ifdef OR1200_BIST // // RAM BIST // input mbist_si_i; input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i; output mbist_so_o; `endif // // Generic synchronous single-port RAM interface // input clk; // Clock input rst; // Reset input ce; // Chip enable input input we; // Write enable input input oe; // Output enable input input [aw-1:0] addr; // address bus inputs input [dw-1:0] di; // input data bus output [dw-1:0] doq; // output data bus // // Internal wires and registers // `ifdef OR1200_XILINX_RAMB4 wire [31:24] unconnected; `else `ifdef OR1200_XILINX_RAMB16 wire [31:24] unconnected; `endif // !OR1200_XILINX_RAMB16 `endif // !OR1200_XILINX_RAMB4 `ifdef OR1200_ARTISAN_SSP `else `ifdef OR1200_VIRTUALSILICON_SSP `else `ifdef OR1200_BIST `endif `endif `endif `ifdef OR1200_ARTISAN_SSP // // Instantiation of ASIC memory: // // Artisan Synchronous Single-Port RAM (ra1sh) // `ifdef UNUSED `else `ifdef OR1200_BIST `else `endif `endif `ifdef OR1200_BIST // RAM BIST `endif `else `ifdef OR1200_AVANT_ATP // // Instantiation of ASIC memory: // // Avant! Asynchronous Two-Port RAM // `else `ifdef OR1200_VIRAGE_SSP // // Instantiation of ASIC memory: // // Virage Synchronous 1-port R/W RAM // `else `ifdef OR1200_VIRTUALSILICON_SSP // // Instantiation of ASIC memory: // // Virtual Silicon Single-Port Synchronous SRAM // `ifdef UNUSED `else `ifdef OR1200_BIST `else `endif `endif `ifdef OR1200_BIST // RAM BIST `endif `else `ifdef OR1200_XILINX_RAMB4 // // Instantiation of FPGA memory: // // Virtex/Spartan2 // // // Block 0 // RAMB4_S16 ramb4_s16_0( .CLK(clk), .RST(1'b0), .ADDR({3'h0, addr}), .DI(di[15:0]), .EN(ce), .WE(we), .DO(doq[15:0]) ); // // Block 1 // RAMB4_S16 ramb4_s16_1( .CLK(clk), .RST(1'b0), .ADDR({3'h0, addr}), .DI({8'h00, di[23:16]}), .EN(ce), .WE(we), .DO({unconnected, doq[23:16]}) ); `else `ifdef OR1200_XILINX_RAMB16 // // Instantiation of FPGA memory: // // Virtex4/Spartan3E // // Added By Nir Mor // RAMB16_S36 ramb16_s36( .CLK(clk), .SSR(1'b0), .ADDR({4'b0000, addr}), .DI({8'h00, di}), .DIP(4'h0), .EN(ce), .WE(we), .DO({unconnected, doq}), .DOP() ); `else `ifdef OR1200_ALTERA_LPM // // Instantiation of FPGA memory: // // Altera LPM // // Added By Jamil Khatib // `else // // Generic single-port synchronous RAM model // // // Generic RAM's registers and wires // reg [dw-1:0] mem [(1<<aw)-1:0]; // RAM content reg [aw-1:0] addr_reg; // RAM address register // // Data output drivers // assign doq = (oe) ? mem[addr_reg] : {dw{1'b0}}; // // RAM address register // always @(posedge clk or posedge rst) if (rst) addr_reg <= {aw{1'b0}}; else if (ce) addr_reg <= addr; // // RAM write // always @(posedge clk) if (ce && we) mem[addr] <= di; `endif // !OR1200_ALTERA_LPM `endif // !OR1200_XILINX_RAMB16 `endif // !OR1200_XILINX_RAMB4 `endif // !OR1200_VIRTUALSILICON_SSP `endif // !OR1200_VIRAGE_SSP `endif // !OR1200_AVANT_ATP `endif // !OR1200_ARTISAN_SSP endmodule
Go to most recent revision | Compare with Previous | Blame | View Log