URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [gcc-4.5.1/] [gcc-4.5.1-or32-1.0rc1/] [gcc/] [ada/] [stylesw.ads] - Rev 617
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S T Y L E S W -- -- -- -- S p e c -- -- -- -- Copyright (C) 1992-2009, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- This package contains the style switches used for setting style options. -- The only clients of this package are the body of Style and the body of -- Switches. All other style checking issues are handled using the public -- interfaces in the spec of Style. with Types; use Types; package Stylesw is -------------------------- -- Style Check Switches -- -------------------------- -- These flags are used to control the details of the style checking -- options. The default values shown here correspond to no style checking. -- If any of these values is set to a non-default value, then -- Opt.Style_Check is set True to active calls to this package. -- The actual mechanism for setting these switches to other than default -- values is via the Set_Style_Check_Option procedure or through a call to -- Set_Default_Style_Check_Options. They should not be set directly in any -- other manner. Style_Check_Array_Attribute_Index : Boolean := False; -- This can be set True by using the -gnatyA switch. If it is True then -- index numbers for array attributes (like Length) are required to be -- absent for one-dimensional arrays and present for multi-dimensional -- array attribute references. Style_Check_Attribute_Casing : Boolean := False; -- This can be set True by using the -gnatya switch. If it is True, then -- attribute names (including keywords such as digits used as attribute -- names) must be in mixed case. Style_Check_Blanks_At_End : Boolean := False; -- This can be set True by using the -gnatyb switch. If it is True, then -- spaces at the end of lines are not permitted. Style_Check_Blank_Lines : Boolean := False; -- This can be set True by using the -gnatyu switch. If it is True, then -- multiple blank lines are not permitted, and there may not be a blank -- line at the end of the file. Style_Check_Boolean_And_Or : Boolean := False; -- This can be set True by using the -gnatyB switch. If it is True, then -- the use of AND THEN/OR ELSE rather than AND/OR is required except for -- the following cases: -- -- a) Both operands are simple Boolean constants or variables -- b) Both operands are of a modular type -- c) Both operands are of an array type Style_Check_Comments : Boolean := False; -- This can be set True by using the -gnatyc switch. If it is True, then -- comments are style checked as follows: -- -- All comments must be at the start of the line, or the first minus must -- be preceded by at least one space. -- -- For a comment that is not at the start of a line, the only requirement -- is that a space follow the comment characters. -- -- For a comment that is at the start of the line, one of the following -- conditions must hold: -- -- The comment characters are the only non-blank characters on the line -- -- The comment characters are followed by an exclamation point (the -- sequence --! is used by gnatprep for marking deleted lines). -- -- The comment characters are followed by two space characters -- -- The line consists entirely of minus signs -- -- The comment characters are followed by a single space, and the last -- two characters on the line are also comment characters. -- -- Note: the reason for the last two conditions is to allow "boxed" -- comments where only a single space separates the comment characters. Style_Check_DOS_Line_Terminator : Boolean := False; -- This can be set true by using the -gnatyd switch. If it is True, then -- the line terminator must be a single LF, without an associated CR (e.g. -- DOS line terminator sequence CR/LF not allowed). Style_Check_End_Labels : Boolean := False; -- This can be set True by using the -gnatye switch. If it is True, then -- optional END labels must always be present. Style_Check_Form_Feeds : Boolean := False; -- This can be set True by using the -gnatyf switch. If it is True, then -- form feeds and vertical tabs are not allowed in the source text. Style_Check_Horizontal_Tabs : Boolean := False; -- This can be set True by using the -gnatyh switch. If it is True, then -- horizontal tabs are not allowed in source text. Style_Check_If_Then_Layout : Boolean := False; -- This can be set True by using the -gnatyi switch. If it is True, then a -- THEN keyword may not appear on the line that immediately follows the -- line containing the corresponding IF. -- -- This permits one of two styles for IF-THEN layout. Either the IF and -- THEN keywords are on the same line, where the condition is short enough, -- or the conditions are continued over to the lines following the IF and -- the THEN stands on its own. For example: -- -- if X > Y then -- -- if X > Y -- and then Y < Z -- then -- -- are allowed, but -- -- if X > Y -- then -- -- is not allowed. Style_Check_Indentation : Column_Number range 0 .. 9 := 0; -- This can be set non-zero by using the -gnatyn (n a digit) switch. If -- it is non-zero it activates indentation checking with the indicated -- indentation value. A value of zero turns off checking. The requirement -- is that any new statement, line comment, declaration or keyword such -- as END, start on a column that is a multiple of the indentation value. Style_Check_Keyword_Casing : Boolean := False; -- This can be set True by using the -gnatyk switch. If it is True, then -- keywords are required to be in all lower case. This rule does not apply -- to keywords such as digits appearing as an attribute name. Style_Check_Layout : Boolean := False; -- This can be set True by using the -gnatyl switch. If it is True, it -- activates checks that constructs are indented as suggested by the -- examples in the RM syntax, e.g. that the ELSE keyword must line up -- with the IF keyword. Style_Check_Max_Line_Length : Boolean := False; -- This can be set True by using the -gnatym/M switches. If it is True, it -- activates checking for a maximum line length of Style_Max_Line_Length -- characters. Style_Check_Max_Nesting_Level : Boolean := False; -- This can be set True by using -gnatyLnnn with a value other than zero -- (a value of zero resets it to False). If True, it activates checking -- the maximum nesting level against Style_Max_Nesting_Level. Style_Check_Missing_Overriding : Boolean := False; -- This can be set True by using the -gnatyO switch. If it is True, then -- "[not] overriding" is required in subprogram declarations and bodies -- where appropriate. Style_Check_Mode_In : Boolean := False; -- This can be set True by using -gnatyI. If True, it activates checking -- that mode IN is not used on its own (since it is the default). Style_Check_Order_Subprograms : Boolean := False; -- This can be set True by using the -gnatyo switch. If it is True, then -- names of subprogram bodies must be in alphabetical order (not taking -- casing into account). Style_Check_Pragma_Casing : Boolean := False; -- This can be set True by using the -gnatyp switch. If it is True, then -- pragma names must use mixed case. Style_Check_References : Boolean := False; -- This can be set True by using the -gnatyr switch. If it is True, then -- all references to declared identifiers are checked. The requirement -- is that casing of the reference be the same as the casing of the -- corresponding declaration. Style_Check_Separate_Stmt_Lines : Boolean := False; -- This can be set True by using the -gnatyS switch. If it is TRUE, -- then for the case of keywords THEN (not preceded by AND) or ELSE (not -- preceded by OR) which introduce a conditionally executed statement -- sequence, there must be no tokens on the same line as the keyword, so -- that coverage testing can clearly identify execution of the statement -- sequence. A comment is permitted, as is THEN ABORT or a PRAGMA keyword -- after ELSE (a common style to specify the condition for the ELSE). Style_Check_Specs : Boolean := False; -- This can be set True by using the -gnatys switches. If it is True, then -- separate specs are required to be present for all procedures except -- parameterless library level procedures. The exception means that typical -- main programs do not require separate specs. Style_Check_Standard : Boolean := False; -- This can be set True by using the -gnatyn switch. If it is True, then -- any references to names in Standard have to be in mixed case mode (e.g. -- Integer, Boolean). Style_Check_Tokens : Boolean := False; -- This can be set True by using the -gnatyt switch. If it is True, then -- the style check that requires canonical spacing between various -- punctuation tokens as follows: -- -- ABS and NOT must be followed by a space -- -- => must be surrounded by spaces -- -- <> must be preceded by a space or left paren -- -- Binary operators other than ** must be surrounded by spaces. -- -- There is no restriction on the layout of the ** binary operator. -- -- Colon must be surrounded by spaces -- -- Colon-equal (assignment) must be surrounded by spaces -- -- Comma must be the first non-blank character on the line, or be -- immediately preceded by a non-blank character, and must be followed -- by a blank. -- -- A space must precede a left paren following a digit or letter, and a -- right paren must not be followed by a space (it can be at the end of -- the line). -- -- A right paren must either be the first non-blank character on a line, -- or it must be preceded by a non-blank character. -- -- A semicolon must not be preceded by a blank, and must not be followed -- by a non-blank character. -- -- A unary plus or minus may not be followed by a space -- -- A vertical bar must be surrounded by spaces -- -- Note that a requirement that a token be preceded by a space is met by -- placing the token at the start of the line, and similarly a requirement -- that a token be followed by a space is met by placing the token at -- the end of the line. Note that in the case where horizontal tabs are -- permitted, a horizontal tab is acceptable for meeting the requirement -- for a space. Style_Check_Xtra_Parens : Boolean := False; -- This can be set True by using the -gnatyx switch. If true, then it is -- not allowed to enclose entire conditional expressions in parentheses -- (C style). Style_Max_Line_Length : Int := 0; -- Value used to check maximum line length. Gets reset as a result of -- use of -gnatym or -gnatyMnnn switches. This value is only read if -- Style_Check_Max_Line_Length is True. Style_Max_Nesting_Level : Int := 0; -- Value used to check maximum nesting level. Gets reset as a result -- of use of the -gnatyLnnn switch. This value is only read if -- Style_Check_Max_Nesting_Level is True. ----------------- -- Subprograms -- ----------------- function RM_Column_Check return Boolean; -- Determines whether style checking is active and the RM column check -- mode is set requiring checking of RM format layout. procedure Set_Default_Style_Check_Options; -- This procedure is called to set the default style checking options in -- response to a -gnaty switch with no suboptions or from -gnatyy. procedure Set_GNAT_Style_Check_Options; -- This procedure is called to set the default style checking options for -- GNAT units (as set by -gnatg or -gnatyg). Style_Msg_Buf : String (1 .. 80); Style_Msg_Len : Natural; -- Used to return procedure Set_Style_Check_Options (Options : String; OK : out Boolean; Err_Col : out Natural); -- This procedure is called to set the style check options that correspond -- to the characters in the given Options string. If all options are valid, -- they are set in an additive manner: any previous options are retained -- unless overridden, unless a minus is encountered, and then subsequent -- style switches are subtracted from the current set. -- -- If all options given are valid, then OK is True, Err_Col is set to -- Options'Last + 1, and Style_Msg_Buf/Style_Msg_Len are unchanged. -- -- If an invalid character is found, then OK is False on exit, and Err_Col -- is the index in options of the bad character. In this case Style_Msg_Len -- is set and Style_Msg_Buf (1 .. Style_Msg_Len) has a detailed message -- describing the error. procedure Set_Style_Check_Options (Options : String); -- Like the above procedure, but used when the Options string is known to -- be valid. This is for example appropriate for calls where the string == -- was obtained by Save_Style_Check_Options. procedure Reset_Style_Check_Options; -- Sets all style check options to off subtype Style_Check_Options is String (1 .. 64); -- Long enough string to hold all options from Save call below procedure Save_Style_Check_Options (Options : out Style_Check_Options); -- Sets Options to represent current selection of options. This set can be -- restored by first calling Reset_Style_Check_Options, and then calling -- Set_Style_Check_Options with the Options string. end Stylesw;
Go to most recent revision | Compare with Previous | Blame | View Log