URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [tags/] [gnu-src/] [gcc-4.5.1/] [gcc-4.5.1-or32-1.0rc2/] [gcc/] [testsuite/] [ada/] [acats/] [tests/] [c9/] [c954015.a] - Rev 294
Go to most recent revision | Compare with Previous | Blame | View Log
-- C954015.A
--
-- Grant of Unlimited Rights
--
-- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
-- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained
-- unlimited rights in the software and documentation contained herein.
-- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making
-- this public release, the Government intends to confer upon all
-- recipients unlimited rights equal to those held by the Government.
-- These rights include rights to use, duplicate, release or disclose the
-- released technical data and computer software in whole or in part, in
-- any manner and for any purpose whatsoever, and to have or permit others
-- to do so.
--
-- DISCLAIMER
--
-- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
-- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED
-- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
-- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE
-- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
-- PARTICULAR PURPOSE OF SAID MATERIAL.
--*
--
-- OBJECTIVE:
-- Check that requeued calls to task entries may, in turn, be requeued.
-- Check that the intermediate requeues are not blocked and that the
-- original caller remains blocked until the last requeue is complete.
-- This test uses:
-- Call with parameters
-- Requeue with abort
--
-- TEST DESCRIPTION
-- A call is placed on the input queue of the Distributor. The
-- Distributor requeues to the Credit task; the Credit task requeues to a
-- secondary task which, in turn requeues to yet another task. This
-- continues down the chain. At the furthest point of the chain the
-- rendezvous is completed. To verify the action, the furthest task
-- waits in the accept statement for a second message to arrive before
-- completing. This second message can only arrive if none of the earlier
-- tasks in the chain are blocked waiting for completion. Apart from
-- the two Credit messages which are used to check the requeue chain one
-- Debit message is sent to validate the mix.
--
--
-- This series of tests uses a simulation of a transaction driven
-- processing system. Line Drivers accept input from an external source
-- and build them into transaction records. These records are then
-- encapsulated in message tasks which remain extant for the life of the
-- transaction in the system. The message tasks put themselves on the
-- input queue of a Distributor which, from information in the
-- transaction and/or system load conditions forwards them to other
-- operating tasks. These in turn might forward the transactions to yet
-- other tasks for further action. The routing is, in real life, dynamic
-- and unpredictable at the time of message generation. All rerouting in
-- this model is done by means of requeues.
--
--
-- CHANGE HISTORY:
-- 06 Dec 94 SAIC ACVC 2.0
--
--!
with Report;
with ImpDef;
procedure C954015 is
-- Arbitrary test values
Credit_Return : constant := 1;
Debit_Return : constant := 2;
-- Mechanism to count the number of Credit Message tasks completed
protected TC_Tasks_Completed is
procedure Increment;
function Count return integer;
private
Number_Complete : integer := 0;
end TC_Tasks_Completed;
TC_Expected_To_Complete : constant integer := 3;
-- Values added to the Return_Value indicating passage through the
-- particular task
TC_Credit_Value : constant integer := 1;
TC_Sub_1_Value : constant integer := 2;
TC_Sub_2_Value : constant integer := 3;
TC_Sub_3_Value : constant integer := 4;
TC_Sub_4_Value : constant integer := 5;
--
TC_Full_Value : integer := TC_Credit_Value + TC_Sub_1_Value +
TC_Sub_2_Value + TC_Sub_3_Value +
TC_Sub_4_Value;
type Transaction_Code is (Credit, Debit);
type Transaction_Record;
type acc_Transaction_Record is access Transaction_Record;
type Transaction_Record is
record
ID : integer := 0;
Code : Transaction_Code := Debit;
Account_Number : integer := 0;
Stock_Number : integer := 0;
Quantity : integer := 0;
Return_Value : integer := 0;
TC_Message_Count : integer := 0;
TC_Thru_Distrib : Boolean := false;
end record;
task type Message_Task is
entry Accept_Transaction (In_Transaction : acc_Transaction_Record);
end Message_Task;
type acc_Message_Task is access Message_Task;
task Line_Driver is
entry Start;
end Line_Driver;
task Distributor is
entry Input(Transaction : acc_Transaction_Record);
end Distributor;
task Credit_Computation is
entry Input(Transaction : acc_Transaction_Record);
end Credit_Computation;
task Debit_Computation is
entry Input(Transaction : acc_Transaction_Record);
end Debit_Computation;
-- The following are almost identical for the purpose of the test
task Credit_Sub_1 is
entry Input(Transaction : acc_Transaction_Record);
end Credit_Sub_1;
--
task Credit_Sub_2 is
entry Input(Transaction : acc_Transaction_Record);
end Credit_Sub_2;
--
task Credit_Sub_3 is
entry Input(Transaction : acc_Transaction_Record);
end Credit_Sub_3;
-- This is the last in the chain
task Credit_Sub_4 is
entry Input(Transaction : acc_Transaction_Record);
end Credit_Sub_4;
-- Mechanism to count the number of Message tasks completed (Credit)
protected body TC_Tasks_Completed is
procedure Increment is
begin
Number_Complete := Number_Complete + 1;
end Increment;
function Count return integer is
begin
return Number_Complete;
end Count;
end TC_Tasks_Completed;
-- Assemble messages received from an external source
-- Creates a message task for each. The message tasks remain extant
-- for the life of the messages in the system.
-- The Line Driver task would normally be designed to loop continuously
-- creating the messages as input is received. Simulate this
-- but limit it to the number of dummy messages needed for this
-- test and allow it to terminate at that point.
--
task body Line_Driver is
Current_ID : integer := 1;
TC_Last_was_for_credit : Boolean := false;
-- Arbitrary limit for the number of messages sent for this test
type TC_Trans_Range is range 1..3;
procedure Build_Credit_Record
( Next_Transaction : acc_Transaction_Record ) is
Dummy_Account : constant integer := 100;
begin
Next_Transaction.ID := Current_ID;
Next_Transaction.Code := Credit;
Next_Transaction.Account_Number := Dummy_Account;
Current_ID := Current_ID + 1;
end Build_Credit_Record;
procedure Build_Debit_Record
( Next_Transaction : acc_Transaction_Record ) is
Dummy_Account : constant integer := 200;
begin
Next_Transaction.ID := Current_ID;
Next_Transaction.Code := Debit;
Next_Transaction.Account_Number := Dummy_Account;
Current_ID := Current_ID + 1;
end Build_Debit_Record;
begin
accept Start; -- wait for trigger from Main
-- Arbitrarily limit the loop to the number needed for this test only
for Transaction_Numb in TC_Trans_Range loop
declare
-- Create a task for the next message
Next_Message_Task : acc_Message_Task := new Message_Task;
-- Create a record for it
Next_Transaction : acc_Transaction_Record :=
new Transaction_Record;
begin
-- Artificially send out in the order required
case Transaction_Numb is
when 1 =>
Build_Credit_Record( Next_Transaction );
when 2 =>
Build_Credit_Record( Next_Transaction );
when 3 =>
Build_Debit_Record ( Next_Transaction );
end case;
-- Present the record to the message task
Next_Message_Task.Accept_Transaction ( Next_Transaction );
end; -- declare
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Line_Driver");
end Line_Driver;
task body Message_Task is
TC_Original_Transaction_Code : Transaction_Code;
This_Transaction : acc_Transaction_Record := new Transaction_Record;
begin
accept Accept_Transaction (In_Transaction : acc_Transaction_Record) do
This_Transaction.all := In_Transaction.all;
end Accept_Transaction;
-- Note the original code to ensure correct return
TC_Original_Transaction_Code := This_Transaction.Code;
-- Queue up on Distributor's Input queue
Distributor.Input ( This_Transaction );
-- This task will now wait for the requeued rendezvous
-- to complete before proceeding
-- After the required computations have been performed
-- return the Transaction_Record appropriately (probably to an output
-- line driver)
null; -- stub
-- The following is all Test Control Code
-- Check that the return values are as expected
if TC_Original_Transaction_Code /= This_Transaction.Code then
-- Incorrect rendezvous
Report.Failed ("Message Task: Incorrect code returned");
end if;
if This_Transaction.Code = Credit then
if This_Transaction.Return_Value /= TC_Full_Value or not
This_Transaction.TC_Thru_Distrib then
Report.Failed ("Expected path not traversed - CR");
end if;
if
This_Transaction.TC_Message_Count not in 1..2 then
Report.Failed ("Incorrect Message Count");
end if;
else
if This_Transaction.Return_Value /= Debit_Return or
This_Transaction.TC_Message_Count /= 1 or not
This_Transaction.TC_Thru_Distrib then
Report.Failed ("Expected path not traversed - DB");
end if;
end if;
TC_Tasks_Completed.Increment;
exception
when others =>
Report.Failed ("Unexpected exception in Message_Task");
end Message_Task;
-- Dispose each input Transaction_Record to the appropriate
-- computation tasks
--
task body Distributor is
begin
loop
select
accept Input (Transaction : acc_Transaction_Record) do
-- Show that the message did pass through the Distributor Task
Transaction.TC_Thru_Distrib := true;
-- Pass this transaction on to the appropriate computation
-- task
case Transaction.Code is
when Credit =>
requeue Credit_Computation.Input with abort;
when Debit =>
requeue Debit_Computation.Input with abort;
end case;
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Distributor");
end Distributor;
-- Computation task.
-- Note: After the computation is performed in this task the message is
-- passed on for further processing to some subsidiary task. The choice
-- of subsidiary task is made according to criteria not specified in
-- this test.
--
task body Credit_Computation is
Message_Count : integer := 0;
begin
loop
select
accept Input ( Transaction : acc_Transaction_Record) do
-- Perform the computations required for this transaction
null; -- stub
-- For the test:
if not Transaction.TC_Thru_Distrib then
Report.Failed
("Credit Task: Wrong queue, Distributor bypassed");
end if;
if Transaction.code /= Credit then
Report.Failed
("Credit Task: Requeue delivered to the wrong queue");
end if;
-- for the test, plug a known value and count
Transaction.Return_Value := TC_Credit_Value;
Message_Count := Message_Count + 1;
Transaction.TC_Message_Count := Message_Count;
-- Depending on transaction content send it on to the
-- some other task for further processing
-- TC: Arbitrarily send the message on to Credit_Sub_1
requeue Credit_Sub_1.Input with abort;
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Credit_Computation");
end Credit_Computation;
task body Credit_Sub_1 is
begin
loop
select
accept Input(Transaction : acc_Transaction_Record) do
-- Process this transaction
null; -- stub
-- Add the value showing passage through this task
Transaction.Return_Value :=
Transaction.Return_Value + TC_Sub_1_Value;
-- Depending on transaction content send it on to the
-- some other task for further processing
-- Arbitrarily send the message on to Credit_Sub_2
requeue Credit_Sub_2.Input with abort;
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Credit_Sub_1");
end Credit_Sub_1;
task body Credit_Sub_2 is
begin
loop
select
accept Input(Transaction : acc_Transaction_Record) do
-- Process this transaction
null; -- stub
-- Add the value showing passage through this task
Transaction.Return_Value :=
Transaction.Return_Value + TC_Sub_2_Value;
-- Depending on transaction content send it on to the
-- some other task for further processing
-- Arbitrarily send the message on to Credit_Sub_3
requeue Credit_Sub_3.Input with abort;
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Credit_Sub_2");
end Credit_Sub_2;
task body Credit_Sub_3 is
begin
loop
select
accept Input(Transaction : acc_Transaction_Record) do
-- Process this transaction
null; -- stub
-- Add the value showing passage through this task
Transaction.Return_Value :=
Transaction.Return_Value + TC_Sub_3_Value;
-- Depending on transaction content send it on to the
-- some other task for further processing
-- Arbitrarily send the message on to Credit_Sub_4
requeue Credit_Sub_4.Input with abort;
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Credit_Sub_3");
end Credit_Sub_3;
-- This is the last in the chain of tasks to which transactions will
-- be requeued
--
task body Credit_Sub_4 is
TC_First_Message : Boolean := true;
begin
loop
select
accept Input(Transaction : acc_Transaction_Record) do
-- Process this transaction
null; -- stub
-- Add the value showing passage through this task
Transaction.Return_Value :=
Transaction.Return_Value + TC_Sub_4_Value;
-- TC: stay in the accept body dealing with the first message
-- until the second arrives. If any of the requeues are
-- blocked the test will hang here indicating failure
if TC_First_Message then
while Input'count = 0 loop
delay ImpDef.Minimum_Task_Switch;
end loop;
TC_First_Message := false;
end if;
-- for the second message, just complete the rendezvous
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Credit_Sub_4");
end Credit_Sub_4;
-- Computation task.
-- Note: After the computation is performed in this task and the
-- accept body is completed the rendezvous in the original
-- message task is completed.
--
task body Debit_Computation is
Message_Count : integer := 0;
begin
loop
select
accept Input (Transaction : acc_Transaction_Record) do
-- Perform the computations required for this message
null; -- stub
-- For the test:
if not Transaction.TC_Thru_Distrib then
Report.Failed
("Debit Task: Wrong queue, Distributor bypassed");
end if;
if Transaction.code /= Debit then
Report.Failed
("Debit Task: Requeue delivered to the wrong queue");
end if;
-- for the test plug a known value and count
Transaction.Return_Value := Debit_Return;
-- one, and only one, message should pass through
Message_Count := Message_Count + 1;
Transaction.TC_Message_Count := Message_Count;
end Input;
or
terminate;
end select;
end loop;
exception
when others =>
Report.Failed ("Unexpected exception in Debit_Computation");
end Debit_Computation;
begin
Report.Test ("C954015", "Test multiple levels of requeue to task entry");
Line_Driver.Start; -- Start the test
-- Ensure that the message tasks completed before calling Result
while (TC_Tasks_Completed.Count < TC_Expected_To_Complete) loop
delay ImpDef.Minimum_Task_Switch;
end loop;
Report.Result;
end C954015;
Go to most recent revision | Compare with Previous | Blame | View Log