URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [tags/] [gnu-src/] [gcc-4.5.1/] [gcc-4.5.1-or32-1.0rc2/] [libgcc/] [config/] [t-slibgcc-darwin] - Rev 410
Go to most recent revision | Compare with Previous | Blame | View Log
# Build a shared libgcc library with the darwin linker.
SHLIB_SOVERSION = 1
SHLIB_VERSTRING = -compatibility_version $(SHLIB_SOVERSION) -current_version $(SHLIB_SOVERSION).0
SHLIB_EXT = .dylib
SHLIB_INSTALL_NAME = @shlib_base_name@.$(SHLIB_SOVERSION)$(SHLIB_EXT)
SHLIB_SONAME = @shlib_base_name@$(SHLIB_EXT)
SHLIB_SOLINK = @shlib_base_name@.so
SHLIB_MAP = @shlib_map_file@
SHLIB_OBJS = @shlib_objs@
SHLIB_DIR = @multilib_dir@
SHLIB_LC = -lc
# Darwin only searches in /usr/lib for shared libraries, not in subdirectories,
# so the libgcc variants have different names not different locations.
# Note that this version is used for the loader, not the linker; the linker
# uses the stub versions named by the versioned members of $(INSTALL_FILES).
SHLIB_LINK = $(CC) $(LIBGCC2_CFLAGS) -dynamiclib -nodefaultlibs \
-install_name @shlib_slibdir@/$(SHLIB_INSTALL_NAME) \
-single_module -o $(SHLIB_DIR)/$(SHLIB_SONAME) \
-Wl,-exported_symbols_list,$(SHLIB_MAP) \
$(SHLIB_VERSTRING) \
@multilib_flags@ $(SHLIB_OBJS) $(SHLIB_LC)
SHLIB_MKMAP = $(gcc_srcdir)/mkmap-flat.awk
SHLIB_MKMAP_OPTS = -v leading_underscore=1
SHLIB_MAPFILES += $(gcc_srcdir)/libgcc-std.ver $(gcc_srcdir)/libgcc-libsystem.ver
# we're only going to build the stubs if the target slib is /usr/lib
# there is no other case in which they're useful in a live system.
ifeq (/usr/lib,$(shlib_slibdir))
LGCC_STUBS = libgcc_s.10.4.dylib libgcc_s.10.5.dylib
else
LGCC_STUBS =
endif
LGCC_FILES = libgcc_s.$(SHLIB_SOVERSION)$(SHLIB_EXT)
LGCC_FILES += $(LGCC_STUBS)
LEXT_STUBS = libgcc_ext.10.4$(SHLIB_EXT) libgcc_ext.10.5$(SHLIB_EXT)
LGCC_FILES += $(LEXT_STUBS)
INSTALL_FILES=$(LGCC_FILES)
# we do our own thing
SHLIB_INSTALL =
# For the toplevel multilib, build a fat archive including all the multilibs.
ifeq ($(MULTIBUILDTOP),)
ifeq ($(enable_shared),yes)
all: $(INSTALL_FILES)
install-leaf: install-darwin-libgcc-stubs
endif
# In order to support -mmacosx-version-min, you need to have multiple
# different libgcc_s libraries that actually get linked against, one for
# each system version supported. They are 'stub' libraries that
# contain no code, just a list of exported symbols.
# The actual use of the libraries is controlled by REAL_LIBGCC_SPEC.
#
# This assumes each multilib corresponds to a different architecture.
libgcc_s.%.dylib : all-multi $(SHLIB_VERPFX).%.ver libgcc_s$(SHLIB_EXT)
MLIBS=`$(CC) --print-multi-lib | sed -e 's/;.*$$//'` ; \
for mlib in $$MLIBS ; do \
$(STRIP) -o $(@)_T$${mlib} \
-s $(SHLIB_VERPFX).$(*).ver -c -u \
../$${mlib}/libgcc/$${mlib}/libgcc_s$(SHLIB_EXT) || exit 1 ; \
done
$(LIPO) -output $@ -create $(@)_T*
rm $(@)_T*
libgcc_ext.%.dylib : all-multi $(SHLIB_VERPFX).%.ver libgcc_s$(SHLIB_EXT)
MLIBS=`$(CC) --print-multi-lib | sed -e 's/;.*$$//'` ; \
for mlib in $$MLIBS ; do \
$(STRIP) -o $(@)_T$${mlib} \
-R $(SHLIB_VERPFX).$(*).ver -c -urx \
../$${mlib}/libgcc/$${mlib}/libgcc_s$(SHLIB_EXT) || exit 1 ; \
done
$(LIPO) -output $@ -create $(@)_T*
rm $(@)_T*
libgcc_s.$(SHLIB_SOVERSION)$(SHLIB_EXT): all-multi libgcc_s$(SHLIB_EXT)
MLIBS=`$(CC) --print-multi-lib | sed -e 's/;.*$$//'` ; \
for mlib in $$MLIBS ; do \
cp ../$${mlib}/libgcc/$${mlib}/libgcc_s$(SHLIB_EXT) \
./libgcc_s.$(SHLIB_SOVERSION)$(SHLIB_EXT)_T_$${mlib} || exit 1 ; \
done
$(LIPO) -output libgcc_s.$(SHLIB_SOVERSION)$(SHLIB_EXT) \
-create libgcc_s.$(SHLIB_SOVERSION)$(SHLIB_EXT)_T*
rm libgcc_s.$(SHLIB_SOVERSION)$(SHLIB_EXT)_T*
install-darwin-libgcc-stubs :
$(mkinstalldirs) $(DESTDIR)$(slibdir)
for d in $(INSTALL_FILES) ; do \
$(INSTALL_DATA) $$d $(DESTDIR)$(slibdir)/$$d || exit 1 ; \
done
if [ -f $(DESTDIR)$(slibdir)/libgcc_s_ppc64.1.dylib ]; then \
rm -f $(DESTDIR)$(slibdir)/libgcc_s_ppc64.1.dylib; \
else true; fi
$(LN_S) libgcc_s.1.dylib \
$(DESTDIR)$(slibdir)/libgcc_s_ppc64.1.dylib
if [ -f $(DESTDIR)$(slibdir)/libgcc_s_x86_64.1.dylib ]; then \
rm -f $(DESTDIR)$(slibdir)/libgcc_s_x86_64.1.dylib; \
else true; fi
$(LN_S) libgcc_s.1.dylib \
$(DESTDIR)$(slibdir)/libgcc_s_x86_64.1.dylib
else
# Do not install shared libraries for any other multilibs. Unless
# we're putting them in the gcc directory during a build, for
# compatibility with the pre-top-level layout. In that case we
# need symlinks.
ifeq ($(enable_shared),yes)
all: install-darwin-libgcc-links
endif
install-darwin-libgcc-links:
$(mkinstalldirs) $(gcc_objdir)$(MULTISUBDIR)
for file in $(INSTALL_FILES); do \
rm -f $(gcc_objdir)$(MULTISUBDIR)/$$file; \
$(LN_S) ../$$file $(gcc_objdir)$(MULTISUBDIR)/; \
done
rm -f $(gcc_objdir)$(MULTISUBDIR)/libgcc_s_x86_64.1.dylib
$(LN_S) libgcc_s.1.dylib \
$(gcc_objdir)$(MULTISUBDIR)/libgcc_s_x86_64.1.dylib
rm -f $(gcc_objdir)$(MULTISUBDIR)/libgcc_s_ppc64.1.dylib
$(LN_S) libgcc_s.1.dylib \
$(gcc_objdir)$(MULTISUBDIR)/libgcc_s_ppc64.1.dylib
endif
Go to most recent revision | Compare with Previous | Blame | View Log