URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [gcc-4.5.1/] [gcc-4.5.1-or32-1.0rc3/] [gcc/] [ada/] [scos.ads] - Rev 593
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S C O S -- -- -- -- S p e c -- -- -- -- Copyright (C) 2009, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- This package defines tables used to store Source Coverage Obligations. It -- is used by Par_SCO to build the SCO information before writing it out to -- the ALI file, and by Get_SCO/Put_SCO to read and write the text form that -- is used in the ALI file. with Types; use Types; with GNAT.Table; package SCOs is -- SCO information can exist in one of two forms. In the ALI file, it is -- represented using a text format that is described in this specification. -- Internally it is stored using two tables SCO_Table and SCO_Unit_Table, -- which are also defined in this unit. -- Par_SCO is part of the compiler. It scans the parsed source tree and -- populates the internal tables. -- Get_SCO reads the text lines in ALI format and populates the internal -- tables with corresponding information. -- Put_SCO reads the internal tables and generates text lines in the ALI -- format. -------------------- -- SCO ALI Format -- -------------------- -- Source coverage obligations are generated on a unit-by-unit basis in the -- ALI file, using lines that start with the identifying character C. These -- lines are generated if the -gnateS switch is set. -- Sloc Ranges -- In several places in the SCO lines, Sloc ranges appear. These are used -- to indicate the first and last Sloc of some construct in the tree and -- they have the form: -- line:col-line:col -- Note that SCO's are generated only for generic templates, not for -- generic instances (since only the first are part of the source). So -- we don't need generic instantiation stuff in these line:col items. -- SCO File headers -- The SCO information follows the cross-reference information, so it -- need not be read by tools like gnatbind, gnatmake etc. The SCO output -- is divided into sections, one section for each unit for which SCO's -- are generated. A SCO section has a header of the form: -- C dependency-number filename -- This header precedes SCO information for the unit identified by -- dependency number and file name. The dependency number is the -- index into the generated D lines and is ones origin (i.e. 2 = -- reference to second generated D line). -- Note that the filename here will reflect the original name if -- a Source_Reference pragma was encountered (since all line number -- references will be with respect to the original file). -- Note: the filename is redundant in that it could be deduced from -- the corresponding D line, but it is convenient at least for human -- reading of the SCO information, and means that the SCO information -- can stand on its own without needing other parts of the ALI file. -- Statements -- For the purpose of SCO generation, the notion of statement includes -- simple statements and also the following declaration types: -- type_declaration -- subtype_declaration -- object_declaration -- renaming_declaration -- generic_instantiation -- and the following regions of the syntax tree: -- the part of a case_statement from CASE up to the expression -- the part of a FOR loop iteration scheme from FOR up to the -- loop_parameter_specification -- the part of a WHILE loop up to the condition -- the part of an extended_return_statement from RETURN up to the -- expression (if present) or to the return_subtype_indication (if -- no expression) -- and any pragma that occurs at a place where a statement or declaration -- is allowed. -- Statement lines -- These lines correspond to one or more successive statements (in the -- sense of the above list) which are always executed in sequence (in the -- absence of exceptions or other external interruptions). -- Entry points to such sequences are: -- the first declaration of any declarative_part -- the first statement of any sequence_of_statements that is not in a -- body or block statement that has a non-empty declarative part -- the first statement after a compound statement -- the first statement after an EXIT, RAISE or GOTO statement -- any statement with a label (the label itself is not part of the -- entry point that is recorded). -- Each entry point must appear as the first entry on a CS line. -- The idea is that if any simple statement on a CS line is known to have -- been executed, then all statements that appear before it on the same -- CS line are certain to also have been executed. -- The form of a statement line in the ALI file is: -- CS *sloc-range [*sloc-range...] -- where each sloc-range corresponds to a single statement, and * is -- one of: -- t type declaration -- s subtype declaration -- o object declaration -- r renaming declaration -- i generic instantiation -- C CASE statement (includes only the expression) -- E EXIT statement -- F FOR loop statement (includes only the iteration scheme) -- I IF statement (includes only the condition [in the RM sense, which -- is a decision in the SCO sense]) -- P PRAGMA -- R extended RETURN statement -- W WHILE loop statement (includes only the condition) -- and is omitted for all other cases. -- Decisions -- Note: in the following description, logical operator includes only the -- short circuited forms and NOT (so can be only NOT, AND THEN, OR ELSE). -- The reason that we can exclude AND/OR/XOR is that we expect SCO's to -- be generated using the restriction No_Direct_Boolean_Operators if we -- are interested in decision coverage, which does not permit the use of -- AND/OR/XOR on boolean operands. These are permitted on modular integer -- types, but such operations do not count as decisions in any case. If -- we are generating SCO's only for simple coverage, then we are not -- interested in decisions in any case. -- Decisions are either simple or complex. A simple decision is a boolean -- expresssion that occurs in the context of a control structure in the -- source program, including WHILE, IF, EXIT WHEN, or in an Assert, -- Check, Pre_Condition or Post_Condition pragma. For pragmas, decision -- SCOs are generated only if the corresponding pragma is enabled. Note -- that a boolean expression in any other context, for example as right -- hand side of an assignment, is not considered to be a simple decision. -- A complex decision is an occurrence of a logical operator which is not -- itself an operand of some other logical operator. If any operand of -- the logical operator is itself a logical operator, this is not a -- separate decision, it is part of the same decision. -- So for example, if we have -- A, B, C, D : Boolean; -- function F (Arg : Boolean) return Boolean); -- ... -- A and then (B or else F (C and then D)) -- There are two (complex) decisions here: -- 1. X and then (Y or else Z) -- where X = A, Y = B, and Z = F (C and then D) -- 2. C and then D -- For each decision, a decision line is generated with the form: -- C*sloc expression -- Here * is one of the following characters: -- I decision in IF statement or conditional expression -- E decision in EXIT WHEN statement -- P decision in pragma Assert/Check/Pre_Condition/Post_Condition -- W decision in WHILE iteration scheme -- X decision appearing in some other expression context -- For I, E, P, W, sloc is the source location of the IF, EXIT, PRAGMA or -- WHILE token. -- For X, sloc is omitted. -- The expression is a prefix polish form indicating the structure of -- the decision, including logical operators and short circuit forms. -- The following is a grammar showing the structure of expression: -- expression ::= term (if expr is not logical operator) -- expression ::= &sloc term term (if expr is AND or AND THEN) -- expression ::= |sloc term term (if expr is OR or OR ELSE) -- expression ::= !sloc term (if expr is NOT) -- In the last four cases, sloc is the source location of the AND, OR, -- or NOT token, respectively. -- term ::= element -- term ::= expression -- element ::= outcome sloc-range -- outcome is one of the following letters: -- c condition -- t true condition -- f false condition -- where t/f are used to mark a condition that has been recognized by -- the compiler as always being true or false. -- & indicates AND THEN connecting two conditions. -- | indicates OR ELSE connecting two conditions. -- ! indicates NOT applied to the expression. -- In the context of Couverture, the No_Direct_Boolean_Opeartors -- restriction is assumed, and no other operator can appear. --------------------------------------------------------------------- -- Internal table used to store Source Coverage Obligations (SCOs) -- --------------------------------------------------------------------- type Source_Location is record Line : Logical_Line_Number; Col : Column_Number; end record; No_Source_Location : Source_Location := (No_Line_Number, No_Column_Number); type SCO_Table_Entry is record From : Source_Location; To : Source_Location; C1 : Character; C2 : Character; Last : Boolean; end record; package SCO_Table is new GNAT.Table ( Table_Component_Type => SCO_Table_Entry, Table_Index_Type => Nat, Table_Low_Bound => 1, Table_Initial => 500, Table_Increment => 300); -- The SCO_Table_Entry values appear as follows: -- Statements -- C1 = 'S' for entry point, 's' otherwise -- C2 = statement type code to appear on CS line (or ' ' if none) -- From = starting source location -- To = ending source location -- Last = False for all but the last entry, True for last entry -- Note: successive statements (possibly interspersed with entries of -- other kinds, that are ignored for this purpose), starting with one -- labeled with C1 = 'S', up to and including the first one labeled with -- Last=True, indicate the sequence to be output for a sequence of -- statements on a single CS line. -- Decision -- C1 = decision type code -- C2 = ' ' -- From = location of IF/EXIT/PRAGMA/WHILE token, -- No_Source_Location for X -- To = No_Source_Location -- Last = unused -- Operator -- C1 = '!', '^', '&', '|' -- C2 = ' ' -- From = location of NOT/AND/OR token -- To = No_Source_Location -- Last = False -- Element (condition) -- C1 = ' ' -- C2 = 'c', 't', or 'f' (condition/true/false) -- From = starting source location -- To = ending source location -- Last = False for all but the last entry, True for last entry -- Note: the sequence starting with a decision, and continuing with -- operators and elements up to and including the first one labeled with -- Last = True, indicate the sequence to be output for a complex decision -- on a single CD decision line. ---------------- -- Unit Table -- ---------------- -- This table keeps track of the units and the corresponding starting and -- ending indexes (From, To) in the SCO table. Note that entry zero is -- unused, it is for convenience in calling the sort routine. Thus the -- real lower bound for active entries is 1. type SCO_Unit_Index is new Int; -- Used to index values in this table. Values start at 1 and are assigned -- sequentially as entries are constructed. type SCO_Unit_Table_Entry is record File_Name : String_Ptr; -- Pointer to file name in ALI file Dep_Num : Nat; -- Dependency number in ALI file From : Nat; -- Starting index in SCO_Table of SCO information for this unit To : Nat; -- Ending index in SCO_Table of SCO information for this unit end record; package SCO_Unit_Table is new GNAT.Table ( Table_Component_Type => SCO_Unit_Table_Entry, Table_Index_Type => SCO_Unit_Index, Table_Low_Bound => 0, -- see note above on sorting Table_Initial => 20, Table_Increment => 200); ----------------- -- Subprograms -- ----------------- procedure Initialize; -- Reset tables for a new compilation procedure Add_SCO (From : Source_Location := No_Source_Location; To : Source_Location := No_Source_Location; C1 : Character := ' '; C2 : Character := ' '; Last : Boolean := False); -- Adds one entry to SCO table with given field values end SCOs;
Go to most recent revision | Compare with Previous | Blame | View Log