URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [gcc-4.5.1/] [gcc-4.5.1-or32-1.0rc3/] [libstdc++-v3/] [src/] [Makefile.in] - Rev 516
Compare with Previous | Blame | View Log
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/fragment.am
subdir = src
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
$(top_srcdir)/../config/futex.m4 \
$(top_srcdir)/../config/iconv.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/lib-ld.m4 \
$(top_srcdir)/../config/lib-link.m4 \
$(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/stdint.m4 \
$(top_srcdir)/../config/unwind_ipinfo.m4 \
$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(toolexeclibdir)"
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
am__DEPENDENCIES_1 =
am__libstdc___la_SOURCES_DIST = atomic.cc bitmap_allocator.cc \
pool_allocator.cc mt_allocator.cc codecvt.cc compatibility.cc \
compatibility-c++0x.cc compatibility-debug_list.cc \
compatibility-list.cc complex_io.cc ctype.cc debug.cc \
functexcept.cc globals_io.cc hash_c++0x.cc hash_tr1.cc \
hashtable_c++0x.cc hashtable_tr1.cc ios.cc ios_failure.cc \
ios_init.cc ios_locale.cc limits.cc list.cc debug_list.cc \
locale.cc locale_init.cc locale_facets.cc localename.cc \
math_stubs_float.cc math_stubs_long_double.cc stdexcept.cc \
strstream.cc system_error.cc tree.cc allocator-inst.cc \
concept-inst.cc fstream-inst.cc ext-inst.cc ios-inst.cc \
iostream-inst.cc istream-inst.cc istream.cc locale-inst.cc \
misc-inst.cc ostream-inst.cc sstream-inst.cc streambuf-inst.cc \
streambuf.cc string-inst.cc valarray-inst.cc wlocale-inst.cc \
wstring-inst.cc mutex.cc condition_variable.cc chrono.cc \
thread.cc future.cc atomicity.cc codecvt_members.cc \
collate_members.cc ctype_members.cc messages_members.cc \
monetary_members.cc numeric_members.cc time_members.cc \
basic_file.cc c++locale.cc compatibility-ldbl.cc \
parallel_list.cc parallel_settings.cc \
compatibility-parallel_list.cc
am__objects_1 = atomicity.lo codecvt_members.lo collate_members.lo \
ctype_members.lo messages_members.lo monetary_members.lo \
numeric_members.lo time_members.lo
@GLIBCXX_LDBL_COMPAT_TRUE@am__objects_2 = compatibility-ldbl.lo
@ENABLE_PARALLEL_TRUE@am__objects_3 = parallel_list.lo \
@ENABLE_PARALLEL_TRUE@ parallel_settings.lo \
@ENABLE_PARALLEL_TRUE@ compatibility-parallel_list.lo
am__objects_4 = basic_file.lo c++locale.lo $(am__objects_2) \
$(am__objects_3)
am__objects_5 = atomic.lo bitmap_allocator.lo pool_allocator.lo \
mt_allocator.lo codecvt.lo compatibility.lo \
compatibility-c++0x.lo compatibility-debug_list.lo \
compatibility-list.lo complex_io.lo ctype.lo debug.lo \
functexcept.lo globals_io.lo hash_c++0x.lo hash_tr1.lo \
hashtable_c++0x.lo hashtable_tr1.lo ios.lo ios_failure.lo \
ios_init.lo ios_locale.lo limits.lo list.lo debug_list.lo \
locale.lo locale_init.lo locale_facets.lo localename.lo \
math_stubs_float.lo math_stubs_long_double.lo stdexcept.lo \
strstream.lo system_error.lo tree.lo allocator-inst.lo \
concept-inst.lo fstream-inst.lo ext-inst.lo ios-inst.lo \
iostream-inst.lo istream-inst.lo istream.lo locale-inst.lo \
misc-inst.lo ostream-inst.lo sstream-inst.lo streambuf-inst.lo \
streambuf.lo string-inst.lo valarray-inst.lo wlocale-inst.lo \
wstring-inst.lo mutex.lo condition_variable.lo chrono.lo \
thread.lo future.lo $(am__objects_1) $(am__objects_4)
am_libstdc___la_OBJECTS = $(am__objects_5)
libstdc___la_OBJECTS = $(am_libstdc___la_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
SOURCES = $(libstdc___la_SOURCES)
DIST_SOURCES = $(am__libstdc___la_SOURCES_DIST)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_FLAGS = @ATOMIC_FLAGS@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
toplevel_srcdir = @toplevel_srcdir@
# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
# These bits are all figured out from configure. Look in acinclude.m4
# or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
$(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
WARN_CXXFLAGS = \
$(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
# Cross compiler support.
toolexeclib_LTLIBRARIES = libstdc++.la
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-exported_symbols_list,libstdc++-symbols.explist
@ENABLE_SYMVERS_FALSE@version_arg =
@ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.explist
@ENABLE_SYMVERS_FALSE@version_dep =
@ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver
# Source files linked in via configuration/make substitution for a
# particular host.
host_sources = \
atomicity.cc \
codecvt_members.cc \
collate_members.cc \
ctype_members.cc \
messages_members.cc \
monetary_members.cc \
numeric_members.cc \
time_members.cc
atomicity_file = ${glibcxx_srcdir}/$(ATOMICITY_SRCDIR)/atomicity.h
# Source files linked in via configuration/make substitution for a
# particular host, but with ad hoc naming rules.
host_sources_extra = \
basic_file.cc c++locale.cc ${ldbl_compat_sources} ${parallel_sources}
@ENABLE_PARALLEL_FALSE@parallel_sources =
@ENABLE_PARALLEL_TRUE@parallel_sources = parallel_list.cc parallel_settings.cc \
@ENABLE_PARALLEL_TRUE@ compatibility-parallel_list.cc
@GLIBCXX_LDBL_COMPAT_FALSE@ldbl_compat_sources =
@GLIBCXX_LDBL_COMPAT_TRUE@ldbl_compat_sources = compatibility-ldbl.cc
# Sources present in the src directory.
sources = \
atomic.cc \
bitmap_allocator.cc \
pool_allocator.cc \
mt_allocator.cc \
codecvt.cc \
compatibility.cc \
compatibility-c++0x.cc \
compatibility-debug_list.cc \
compatibility-list.cc \
complex_io.cc \
ctype.cc \
debug.cc \
functexcept.cc \
globals_io.cc \
hash_c++0x.cc \
hash_tr1.cc \
hashtable_c++0x.cc \
hashtable_tr1.cc \
ios.cc \
ios_failure.cc \
ios_init.cc \
ios_locale.cc \
limits.cc \
list.cc \
debug_list.cc \
locale.cc \
locale_init.cc \
locale_facets.cc \
localename.cc \
math_stubs_float.cc \
math_stubs_long_double.cc \
stdexcept.cc \
strstream.cc \
system_error.cc \
tree.cc \
allocator-inst.cc \
concept-inst.cc \
fstream-inst.cc \
ext-inst.cc \
ios-inst.cc \
iostream-inst.cc \
istream-inst.cc \
istream.cc \
locale-inst.cc \
misc-inst.cc \
ostream-inst.cc \
sstream-inst.cc \
streambuf-inst.cc \
streambuf.cc \
string-inst.cc \
valarray-inst.cc \
wlocale-inst.cc \
wstring-inst.cc \
mutex.cc \
condition_variable.cc \
chrono.cc \
thread.cc \
future.cc \
${host_sources} \
${host_sources_extra}
libstdc___la_SOURCES = $(sources)
libstdc___la_LIBADD = \
$(GLIBCXX_LIBS) \
$(top_builddir)/libsupc++/libsupc++convenience.la
libstdc___la_DEPENDENCIES = \
${version_dep} \
$(top_builddir)/libsupc++/libsupc++convenience.la
libstdc___la_LDFLAGS = \
-version-info $(libtool_VERSION) ${version_arg} -lm
libstdc___la_LINK = $(CXXLINK) $(libstdc___la_LDFLAGS)
# Use special rules for the deprecated source files so that they find
# deprecated include files.
GLIBCXX_INCLUDE_DIR = $(glibcxx_builddir)/include
# Use special rules for parallel mode compilation.
PARALLEL_FLAGS = -fopenmp -D_GLIBCXX_PARALLEL -I$(glibcxx_builddir)/../libgomp
# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way. Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion calls for it.
AM_CXXFLAGS = \
-fno-implicit-templates \
$(WARN_CXXFLAGS) \
$(OPTIMIZE_CXXFLAGS) \
$(CONFIG_CXXFLAGS)
# libstdc++ libtool notes
# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)
# 2) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured. However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line. The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up. The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use
LTCXXCOMPILE = $(LIBTOOL) --tag CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile \
$(CXX) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))
# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used. We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point. So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = $(LIBTOOL) --tag CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \
$(CXX) $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@
debugdir = debug
all: all-am
.SUFFIXES:
.SUFFIXES: .cc .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign --ignore-deps src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
}
uninstall-toolexeclibLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
done
clean-toolexeclibLTLIBRARIES:
-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libstdc++.la: $(libstdc___la_OBJECTS) $(libstdc___la_DEPENDENCIES)
$(libstdc___la_LINK) -rpath $(toolexeclibdir) $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.cc.o:
$(CXXCOMPILE) -c -o $@ $<
.cc.obj:
$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.cc.lo:
$(LTCXXCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) all-local
installdirs:
for dir in "$(DESTDIR)$(toolexeclibdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool clean-toolexeclibLTLIBRARIES \
mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-data-local
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-toolexeclibLTLIBRARIES
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-toolexeclibLTLIBRARIES
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
clean-generic clean-libtool clean-toolexeclibLTLIBRARIES ctags \
distclean distclean-compile distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-local install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
install-toolexeclibLTLIBRARIES installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-toolexeclibLTLIBRARIES
# Symbol versioning for shared libraries.
@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver: ${glibcxx_srcdir}/$(SYMVER_FILE) \
@ENABLE_SYMVERS_TRUE@ $(port_specific_symbol_files)
@ENABLE_SYMVERS_TRUE@ cp ${glibcxx_srcdir}/$(SYMVER_FILE) ./libstdc++-symbols.ver
@ENABLE_SYMVERS_TRUE@ chmod +w ./libstdc++-symbols.ver
@ENABLE_SYMVERS_TRUE@ if test "x$(port_specific_symbol_files)" != x; then \
@ENABLE_SYMVERS_TRUE@ if grep '^# Appended to version file.' \
@ENABLE_SYMVERS_TRUE@ $(port_specific_symbol_files) /dev/null > /dev/null 2>&1; then \
@ENABLE_SYMVERS_TRUE@ cat $(port_specific_symbol_files) >> $@; \
@ENABLE_SYMVERS_TRUE@ else \
@ENABLE_SYMVERS_TRUE@ sed -n '1,/DO NOT DELETE/p' $@ > tmp.top; \
@ENABLE_SYMVERS_TRUE@ sed -n '/DO NOT DELETE/,$$p' $@ > tmp.bottom; \
@ENABLE_SYMVERS_TRUE@ cat tmp.top $(port_specific_symbol_files) tmp.bottom > $@; \
@ENABLE_SYMVERS_TRUE@ rm tmp.top tmp.bottom; \
@ENABLE_SYMVERS_TRUE@ fi; \
@ENABLE_SYMVERS_TRUE@ fi
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.explist : libstdc++-symbols.ver \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ ${glibcxx_srcdir}/scripts/make_exports.pl \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ perl ${glibcxx_srcdir}/scripts/make_exports.pl \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ libstdc++-symbols.ver \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ `echo $(libstdc___la_LIBADD) | \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ > $@ || (rm -f $@ ; exit 1)
codecvt_members.cc: ${glibcxx_srcdir}/$(CCODECVT_CC)
$(LN_S) ${glibcxx_srcdir}/$(CCODECVT_CC) . || true
collate_members.cc: ${glibcxx_srcdir}/$(CCOLLATE_CC)
$(LN_S) ${glibcxx_srcdir}/$(CCOLLATE_CC) . || true
ctype_members.cc: ${glibcxx_srcdir}/$(CCTYPE_CC)
$(LN_S) ${glibcxx_srcdir}/$(CCTYPE_CC) . || true
messages_members.cc: ${glibcxx_srcdir}/$(CMESSAGES_CC)
$(LN_S) ${glibcxx_srcdir}/$(CMESSAGES_CC) . || true
monetary_members.cc: ${glibcxx_srcdir}/$(CMONEY_CC)
$(LN_S) ${glibcxx_srcdir}/$(CMONEY_CC) . || true
numeric_members.cc: ${glibcxx_srcdir}/$(CNUMERIC_CC)
$(LN_S) ${glibcxx_srcdir}/$(CNUMERIC_CC) . || true
time_members.cc: ${glibcxx_srcdir}/$(CTIME_CC)
$(LN_S) ${glibcxx_srcdir}/$(CTIME_CC) . || true
atomicity.cc: ${atomicity_file}
$(LN_S) ${atomicity_file} ./atomicity.cc || true
c++locale.cc: ${glibcxx_srcdir}/$(CLOCALE_CC)
$(LN_S) ${glibcxx_srcdir}/$(CLOCALE_CC) ./$@ || true
basic_file.cc: ${glibcxx_srcdir}/$(BASIC_FILE_CC)
$(LN_S) ${glibcxx_srcdir}/$(BASIC_FILE_CC) ./$@ || true
vpath % $(top_srcdir)/src
vpath % $(top_srcdir)
strstream.lo: strstream.cc
$(LTCXXCOMPILE) -I$(GLIBCXX_INCLUDE_DIR)/backward -Wno-deprecated -c $<
strstream.o: strstream.cc
$(CXXCOMPILE) -I$(GLIBCXX_INCLUDE_DIR)/backward -Wno-deprecated -c $<
# Use special rules for the concept-checking instantiations so that all
# the generated template functions are also instantiated. Force the checks
# to be on so that the instantiations are actually seen.
concept-inst.lo: concept-inst.cc
$(LTCXXCOMPILE) -D_GLIBCXX_CONCEPT_CHECKS -fimplicit-templates -c $<
concept-inst.o: concept-inst.cc
$(CXXCOMPILE) -D_GLIBCXX_CONCEPT_CHECKS -fimplicit-templates -c $<
parallel_list.lo: parallel_list.cc
$(LTCXXCOMPILE) $(PARALLEL_FLAGS) -c $<
parallel_list.o: parallel_list.cc
$(CXXCOMPILE) $(PARALLEL_FLAGS) -c $<
parallel_settings.lo: parallel_settings.cc
$(LTCXXCOMPILE) $(PARALLEL_FLAGS) -c $<
parallel_settings.o: parallel_settings.cc
$(CXXCOMPILE) $(PARALLEL_FLAGS) -c $<
compatibility-parallel_list.lo: compatibility-parallel_list.cc
$(LTCXXCOMPILE) $(PARALLEL_FLAGS) -c $<
compatibility-parallel_list.o: compatibility-parallel_list.cc
$(CXXCOMPILE) $(PARALLEL_FLAGS) -c $<
# Use special rules for the C++0x sources so that the proper flags are passed.
functexcept.lo: functexcept.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
functexcept.o: functexcept.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
system_error.lo: system_error.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
system_error.o: system_error.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
mutex.lo: mutex.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
mutex.o: mutex.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
condition_variable.lo: condition_variable.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
condition_variable.o: condition_variable.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
compatibility-c++0x.lo: compatibility-c++0x.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
compatibility-c++0x.o: compatibility-c++0x.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
hash_c++0x.lo: hash_c++0x.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
hash_c++0x.o: hash_c++0x.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
hashtable_c++0x.lo: hashtable_c++0x.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
hashtable_c++0x.o: hashtable_c++0x.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
limits.lo: limits.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
limits.o: limits.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
atomic.lo: atomic.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
atomic.o: atomic.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
fstream-inst.lo: fstream-inst.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
fstream-inst.o: fstream-inst.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
string-inst.lo: string-inst.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
string-inst.o: string-inst.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
wstring-inst.lo: wstring-inst.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
wstring-inst.o: wstring-inst.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
chrono.lo: chrono.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
chrono.o: chrono.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
thread.lo: thread.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
thread.o: thread.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
future.lo: future.cc
$(LTCXXCOMPILE) -std=gnu++0x -c $<
future.o: future.cc
$(CXXCOMPILE) -std=gnu++0x -c $<
# Use special rules for compatibility-ldbl.cc compilation, as we need to
# pass -mlong-double-64.
@GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.lo: compatibility-ldbl.cc
@GLIBCXX_LDBL_COMPAT_TRUE@ $(LTCXXCOMPILE) -mlong-double-64 -c $<
@GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.o: compatibility-ldbl.cc
@GLIBCXX_LDBL_COMPAT_TRUE@ $(CXXCOMPILE) -mlong-double-64 -c $<
# Added bits to build debug library.
@GLIBCXX_BUILD_DEBUG_TRUE@all-local: build_debug
@GLIBCXX_BUILD_DEBUG_TRUE@install-data-local: install_debug
@GLIBCXX_BUILD_DEBUG_FALSE@all-local:
@GLIBCXX_BUILD_DEBUG_FALSE@install-data-local:
# Build a set of debug objects here.
stamp-debug:
if test ! -d ${debugdir}; then \
mkdir -p ${debugdir}; \
(cd ${debugdir}; \
sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \
-e 's/srcdir = \.\./srcdir = ..\/../' \
-e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \
-e 's/all-local: build_debug/all-local:/' \
-e 's/install-data-local: install_debug/install-data-local:/' \
< ../Makefile > Makefile) ; \
fi; \
echo `date` > stamp-debug;
build_debug: stamp-debug
(cd ${debugdir} && $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' all)
# Install debug library here.
install_debug:
(cd ${debugdir} && $(MAKE) \
toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: