URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [gcc-4.5.1/] [gcc-4.5.1-or32-1.0rc4/] [gcc/] [tree-vectorizer.c] - Rev 593
Go to most recent revision | Compare with Previous | Blame | View Log
/* Vectorizer Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. Contributed by Dorit Naishlos <dorit@il.ibm.com> This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ /* Loop and basic block vectorizer. This file contains drivers for the three vectorizers: (1) loop vectorizer (inter-iteration parallelism), (2) loop-aware SLP (intra-iteration parallelism) (invoked by the loop vectorizer) (3) BB vectorizer (out-of-loops), aka SLP The rest of the vectorizer's code is organized as follows: - tree-vect-loop.c - loop specific parts such as reductions, etc. These are used by drivers (1) and (2). - tree-vect-loop-manip.c - vectorizer's loop control-flow utilities, used by drivers (1) and (2). - tree-vect-slp.c - BB vectorization specific analysis and transformation, used by drivers (2) and (3). - tree-vect-stmts.c - statements analysis and transformation (used by all). - tree-vect-data-refs.c - vectorizer specific data-refs analysis and manipulations (used by all). - tree-vect-patterns.c - vectorizable code patterns detector (used by all) Here's a poor attempt at illustrating that: tree-vectorizer.c: loop_vect() loop_aware_slp() slp_vect() | / \ / | / \ / tree-vect-loop.c tree-vect-slp.c | \ \ / / | | \ \/ / | | \ /\ / | | \ / \ / | tree-vect-stmts.c tree-vect-data-refs.c \ / tree-vect-patterns.c */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "ggc.h" #include "tree.h" #include "diagnostic.h" #include "tree-flow.h" #include "tree-dump.h" #include "cfgloop.h" #include "cfglayout.h" #include "tree-vectorizer.h" #include "tree-pass.h" #include "timevar.h" /* vect_dump will be set to stderr or dump_file if exist. */ FILE *vect_dump; /* vect_verbosity_level set to an invalid value to mark that it's uninitialized. */ static enum verbosity_levels vect_verbosity_level = MAX_VERBOSITY_LEVEL; static enum verbosity_levels user_vect_verbosity_level = MAX_VERBOSITY_LEVEL; /* Loop or bb location. */ LOC vect_location; /* Vector mapping GIMPLE stmt to stmt_vec_info. */ VEC(vec_void_p,heap) *stmt_vec_info_vec; /* Function vect_set_verbosity_level. Called from opts.c upon detection of the -ftree-vectorizer-verbose=N option. */ void vect_set_verbosity_level (const char *val) { unsigned int vl; vl = atoi (val); if (vl < MAX_VERBOSITY_LEVEL) user_vect_verbosity_level = (enum verbosity_levels) vl; else user_vect_verbosity_level = (enum verbosity_levels) (MAX_VERBOSITY_LEVEL - 1); } /* Function vect_set_dump_settings. Fix the verbosity level of the vectorizer if the requested level was not set explicitly using the flag -ftree-vectorizer-verbose=N. Decide where to print the debugging information (dump_file/stderr). If the user defined the verbosity level, but there is no dump file, print to stderr, otherwise print to the dump file. */ static void vect_set_dump_settings (bool slp) { vect_dump = dump_file; /* Check if the verbosity level was defined by the user: */ if (user_vect_verbosity_level != MAX_VERBOSITY_LEVEL) { vect_verbosity_level = user_vect_verbosity_level; /* Ignore user defined verbosity if dump flags require higher level of verbosity. */ if (dump_file) { if (((dump_flags & TDF_DETAILS) && vect_verbosity_level >= REPORT_DETAILS) || ((dump_flags & TDF_STATS) && vect_verbosity_level >= REPORT_UNVECTORIZED_LOCATIONS)) return; } else { /* If there is no dump file, print to stderr in case of loop vectorization. */ if (!slp) vect_dump = stderr; return; } } /* User didn't specify verbosity level: */ if (dump_file && (dump_flags & TDF_DETAILS)) vect_verbosity_level = REPORT_DETAILS; else if (dump_file && (dump_flags & TDF_STATS)) vect_verbosity_level = REPORT_UNVECTORIZED_LOCATIONS; else vect_verbosity_level = REPORT_NONE; gcc_assert (dump_file || vect_verbosity_level == REPORT_NONE); } /* Function debug_loop_details. For vectorization debug dumps. */ bool vect_print_dump_info (enum verbosity_levels vl) { if (vl > vect_verbosity_level) return false; if (!current_function_decl || !vect_dump) return false; if (vect_location == UNKNOWN_LOC) fprintf (vect_dump, "\n%s:%d: note: ", DECL_SOURCE_FILE (current_function_decl), DECL_SOURCE_LINE (current_function_decl)); else fprintf (vect_dump, "\n%s:%d: note: ", LOC_FILE (vect_location), LOC_LINE (vect_location)); return true; } /* Function vectorize_loops. Entry point to loop vectorization phase. */ unsigned vectorize_loops (void) { unsigned int i; unsigned int num_vectorized_loops = 0; unsigned int vect_loops_num; loop_iterator li; struct loop *loop; vect_loops_num = number_of_loops (); /* Bail out if there are no loops. */ if (vect_loops_num <= 1) return 0; /* Fix the verbosity level if not defined explicitly by the user. */ vect_set_dump_settings (false); init_stmt_vec_info_vec (); /* ----------- Analyze loops. ----------- */ /* If some loop was duplicated, it gets bigger number than all previously defined loops. This fact allows us to run only over initial loops skipping newly generated ones. */ FOR_EACH_LOOP (li, loop, 0) if (optimize_loop_nest_for_speed_p (loop)) { loop_vec_info loop_vinfo; vect_location = find_loop_location (loop); loop_vinfo = vect_analyze_loop (loop); loop->aux = loop_vinfo; if (!loop_vinfo || !LOOP_VINFO_VECTORIZABLE_P (loop_vinfo)) continue; vect_transform_loop (loop_vinfo); num_vectorized_loops++; } vect_location = UNKNOWN_LOC; statistics_counter_event (cfun, "Vectorized loops", num_vectorized_loops); if (vect_print_dump_info (REPORT_UNVECTORIZED_LOCATIONS) || (num_vectorized_loops > 0 && vect_print_dump_info (REPORT_VECTORIZED_LOCATIONS))) fprintf (vect_dump, "vectorized %u loops in function.\n", num_vectorized_loops); /* ----------- Finalize. ----------- */ mark_sym_for_renaming (gimple_vop (cfun)); for (i = 1; i < vect_loops_num; i++) { loop_vec_info loop_vinfo; loop = get_loop (i); if (!loop) continue; loop_vinfo = (loop_vec_info) loop->aux; destroy_loop_vec_info (loop_vinfo, true); loop->aux = NULL; } free_stmt_vec_info_vec (); return num_vectorized_loops > 0 ? TODO_cleanup_cfg : 0; } /* Entry point to basic block SLP phase. */ static unsigned int execute_vect_slp (void) { basic_block bb; /* Fix the verbosity level if not defined explicitly by the user. */ vect_set_dump_settings (true); init_stmt_vec_info_vec (); FOR_EACH_BB (bb) { vect_location = find_bb_location (bb); if (vect_slp_analyze_bb (bb)) { vect_slp_transform_bb (bb); if (vect_print_dump_info (REPORT_VECTORIZED_LOCATIONS)) fprintf (vect_dump, "basic block vectorized using SLP\n"); } } free_stmt_vec_info_vec (); return 0; } static bool gate_vect_slp (void) { /* Apply SLP either if the vectorizer is on and the user didn't specify whether to run SLP or not, or if the SLP flag was set by the user. */ return ((flag_tree_vectorize != 0 && flag_tree_slp_vectorize != 0) || flag_tree_slp_vectorize == 1); } struct gimple_opt_pass pass_slp_vectorize = { { GIMPLE_PASS, "slp", /* name */ gate_vect_slp, /* gate */ execute_vect_slp, /* execute */ NULL, /* sub */ NULL, /* next */ 0, /* static_pass_number */ TV_TREE_SLP_VECTORIZATION, /* tv_id */ PROP_ssa | PROP_cfg, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ TODO_ggc_collect | TODO_verify_ssa | TODO_dump_func | TODO_update_ssa | TODO_verify_stmts /* todo_flags_finish */ } }; /* Increase alignment of global arrays to improve vectorization potential. TODO: - Consider also structs that have an array field. - Use ipa analysis to prune arrays that can't be vectorized? This should involve global alignment analysis and in the future also array padding. */ static unsigned int increase_alignment (void) { struct varpool_node *vnode; /* Increase the alignment of all global arrays for vectorization. */ for (vnode = varpool_nodes_queue; vnode; vnode = vnode->next_needed) { tree vectype, decl = vnode->decl; tree t; unsigned int alignment; t = TREE_TYPE(decl); if (TREE_CODE (t) != ARRAY_TYPE) continue; vectype = get_vectype_for_scalar_type (strip_array_types (t)); if (!vectype) continue; alignment = TYPE_ALIGN (vectype); if (DECL_ALIGN (decl) >= alignment) continue; if (vect_can_force_dr_alignment_p (decl, alignment)) { DECL_ALIGN (decl) = TYPE_ALIGN (vectype); DECL_USER_ALIGN (decl) = 1; if (dump_file) { fprintf (dump_file, "Increasing alignment of decl: "); print_generic_expr (dump_file, decl, TDF_SLIM); fprintf (dump_file, "\n"); } } } return 0; } static bool gate_increase_alignment (void) { return flag_section_anchors && flag_tree_vectorize; } struct simple_ipa_opt_pass pass_ipa_increase_alignment = { { SIMPLE_IPA_PASS, "increase_alignment", /* name */ gate_increase_alignment, /* gate */ increase_alignment, /* execute */ NULL, /* sub */ NULL, /* next */ 0, /* static_pass_number */ TV_NONE, /* tv_id */ 0, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ 0 /* todo_flags_finish */ } };
Go to most recent revision | Compare with Previous | Blame | View Log