URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [tags/] [gnu-src/] [gdb-6.8/] [pre-binutils-2.20.1-sync/] [include/] [gdb/] [remote-sim.h] - Rev 223
Compare with Previous | Blame | View Log
/* This file defines the interface between the simulator and gdb. Copyright 1993, 1994, 1996, 1997, 1998, 2000, 2002, 2007, 2008 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #if !defined (REMOTE_SIM_H) #define REMOTE_SIM_H 1 #ifdef __cplusplus extern "C" { #endif /* This file is used when building stand-alone simulators, so isolate this file from gdb. */ /* Pick up CORE_ADDR_TYPE if defined (from gdb), otherwise use same value as gdb does (unsigned int - from defs.h). */ #ifndef CORE_ADDR_TYPE typedef unsigned int SIM_ADDR; #else typedef CORE_ADDR_TYPE SIM_ADDR; #endif /* Semi-opaque type used as result of sim_open and passed back to all other routines. "desc" is short for "descriptor". It is up to each simulator to define `sim_state'. */ typedef struct sim_state *SIM_DESC; /* Values for `kind' arg to sim_open. */ typedef enum { SIM_OPEN_STANDALONE, /* simulator used standalone (run.c) */ SIM_OPEN_DEBUG /* simulator used by debugger (gdb) */ } SIM_OPEN_KIND; /* Return codes from various functions. */ typedef enum { SIM_RC_FAIL = 0, SIM_RC_OK = 1 } SIM_RC; /* The bfd struct, as an opaque type. */ struct bfd; /* Main simulator entry points. */ /* Create a fully initialized simulator instance. (This function is called when the simulator is selected from the gdb command line.) KIND specifies how the simulator shall be used. Currently there are only two kinds: stand-alone and debug. CALLBACK specifies a standard host callback (defined in callback.h). ABFD, when non NULL, designates a target program. The program is not loaded. ARGV is a standard ARGV pointer such as that passed from the command line. The syntax of the argument list is is assumed to be ``SIM-PROG { SIM-OPTION } [ TARGET-PROGRAM { TARGET-OPTION } ]''. The trailing TARGET-PROGRAM and args are only valid for a stand-alone simulator. On success, the result is a non NULL descriptor that shall be passed to the other sim_foo functions. While the simulator configuration can be parameterized by (in decreasing precedence) ARGV's SIM-OPTION, ARGV's TARGET-PROGRAM and the ABFD argument, the successful creation of the simulator shall not dependent on the presence of any of these arguments/options. Hardware simulator: The created simulator shall be sufficiently initialized to handle, with out restrictions any client requests (including memory reads/writes, register fetch/stores and a resume). Process simulator: that process is not created until a call to sim_create_inferior. FIXME: What should the state of the simulator be? */ SIM_DESC sim_open PARAMS ((SIM_OPEN_KIND kind, struct host_callback_struct *callback, struct bfd *abfd, char **argv)); /* Destory a simulator instance. QUITTING is non-zero if we cannot hang on errors. This may involve freeing target memory and closing any open files and mmap'd areas. You cannot assume sim_kill has already been called. */ void sim_close PARAMS ((SIM_DESC sd, int quitting)); /* Load program PROG into the simulators memory. If ABFD is non-NULL, the bfd for the file has already been opened. The result is a return code indicating success. Hardware simulator: Normally, each program section is written into memory according to that sections LMA using physical (direct) addressing. The exception being systems, such as PPC/CHRP, which support more complicated program loaders. A call to this function should not effect the state of the processor registers. Multiple calls to this function are permitted and have an accumulative effect. Process simulator: Calls to this function may be ignored. FIXME: Most hardware simulators load the image at the VMA using virtual addressing. FIXME: For some hardware targets, before a loaded program can be executed, it requires the manipulation of VM registers and tables. Such manipulation should probably (?) occure in sim_create_inferior. */ SIM_RC sim_load PARAMS ((SIM_DESC sd, char *prog, struct bfd *abfd, int from_tty)); /* Prepare to run the simulated program. ABFD, if not NULL, provides initial processor state information. ARGV and ENV, if non NULL, are NULL terminated lists of pointers. Hardware simulator: This function shall initialize the processor registers to a known value. The program counter and possibly stack pointer shall be set using information obtained from ABFD (or hardware reset defaults). ARGV and ENV, dependant on the target ABI, may be written to memory. Process simulator: After a call to this function, a new process instance shall exist. The TEXT, DATA, BSS and stack regions shall all be initialized, ARGV and ENV shall be written to process address space (according to the applicable ABI) and the program counter and stack pointer set accordingly. */ SIM_RC sim_create_inferior PARAMS ((SIM_DESC sd, struct bfd *abfd, char **argv, char **env)); /* Fetch LENGTH bytes of the simulated program's memory. Start fetch at virtual address MEM and store in BUF. Result is number of bytes read, or zero if error. */ int sim_read PARAMS ((SIM_DESC sd, SIM_ADDR mem, unsigned char *buf, int length)); /* Store LENGTH bytes from BUF into the simulated program's memory. Store bytes starting at virtual address MEM. Result is number of bytes write, or zero if error. */ int sim_write PARAMS ((SIM_DESC sd, SIM_ADDR mem, unsigned char *buf, int length)); /* Fetch register REGNO storing its raw (target endian) value in the LENGTH byte buffer BUF. Return the actual size of the register or zero if REGNO is not applicable. Legacy implementations ignore LENGTH and always return -1. If LENGTH does not match the size of REGNO no data is transfered (the actual register size is still returned). */ int sim_fetch_register PARAMS ((SIM_DESC sd, int regno, unsigned char *buf, int length)); /* Store register REGNO from the raw (target endian) value in BUF. Return the actual size of the register or zero if REGNO is not applicable. Legacy implementations ignore LENGTH and always return -1. If LENGTH does not match the size of REGNO no data is transfered (the actual register size is still returned). */ int sim_store_register PARAMS ((SIM_DESC sd, int regno, unsigned char *buf, int length)); /* Print whatever statistics the simulator has collected. VERBOSE is currently unused and must always be zero. */ void sim_info PARAMS ((SIM_DESC sd, int verbose)); /* Run (or resume) the simulated program. STEP, when non-zero indicates that only a single simulator cycle should be emulated. SIGGNAL, if non-zero is a (HOST) SIGRC value indicating the type of event (hardware interrupt, signal) to be delivered to the simulated program. Hardware simulator: If the SIGRC value returned by sim_stop_reason() is passed back to the simulator via SIGGNAL then the hardware simulator shall correctly deliver the hardware event indicated by that signal. If a value of zero is passed in then the simulation will continue as if there were no outstanding signal. The effect of any other SIGGNAL value is is implementation dependant. Process simulator: If SIGRC is non-zero then the corresponding signal is delivered to the simulated program and execution is then continued. A zero SIGRC value indicates that the program should continue as normal. */ void sim_resume PARAMS ((SIM_DESC sd, int step, int siggnal)); /* Asynchronous request to stop the simulation. A nonzero return indicates that the simulator is able to handle the request */ int sim_stop PARAMS ((SIM_DESC sd)); /* Fetch the REASON why the program stopped. SIM_EXITED: The program has terminated. SIGRC indicates the target dependant exit status. SIM_STOPPED: The program has stopped. SIGRC uses the host's signal numbering as a way of identifying the reaon: program interrupted by user via a sim_stop request (SIGINT); a breakpoint instruction (SIGTRAP); a completed single step (SIGTRAP); an internal error condition (SIGABRT); an illegal instruction (SIGILL); Access to an undefined memory region (SIGSEGV); Mis-aligned memory access (SIGBUS). For some signals information in addition to the signal number may be retained by the simulator (e.g. offending address), that information is not directly accessable via this interface. SIM_SIGNALLED: The program has been terminated by a signal. The simulator has encountered target code that causes the the program to exit with signal SIGRC. SIM_RUNNING, SIM_POLLING: The return of one of these values indicates a problem internal to the simulator. */ enum sim_stop { sim_running, sim_polling, sim_exited, sim_stopped, sim_signalled }; void sim_stop_reason PARAMS ((SIM_DESC sd, enum sim_stop *reason, int *sigrc)); /* Passthru for other commands that the simulator might support. Simulators should be prepared to deal with any combination of NULL or empty CMD. */ void sim_do_command PARAMS ((SIM_DESC sd, char *cmd)); #ifdef __cplusplus } #endif #endif /* !defined (REMOTE_SIM_H) */