URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [tags/] [gnu-src/] [gdb-7.2/] [gdb-7.2-or32-1.0rc1/] [readline/] [examples/] [rlfe/] [config.h.in] - Rev 330
Go to most recent revision | Compare with Previous | Blame | View Log
/* Copyright 2004 Per Bothner <per@bothner.com>
* Based on config.h from screen-4.0.2.
* Copyright (c) 1993-2000
* Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
* Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
* Copyright (c) 1987 Oliver Laumann
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program (see the file COPYING); if not, write to the
* Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*
****************************************************************
* $Id: config.h.in,v 1.12 1994/05/31 12:31:36 mlschroe Exp $ FAU
*/
/**********************************************************************
*
* User Configuration Section
*/
/*
* define PTYMODE if you do not like the default of 0622, which allows
* public write to your pty.
* define PTYGROUP to some numerical group-id if you do not want the
* tty to be in "your" group.
* Note, screen is unable to change mode or group of the pty if it
* is not installed with sufficient privilege. (e.g. set-uid-root)
* define PTYROFS if the /dev/pty devices are mounted on a read-only
* filesystem so screen should not even attempt to set mode or group
* even if running as root (e.g. on TiVo).
*/
#undef PTYMODE
#undef PTYGROUP
#undef PTYROFS
/*
* If screen is NOT installed set-uid root, screen can provide tty
* security by exclusively locking the ptys. While this keeps other
* users from opening your ptys, it also keeps your own subprocesses
* from being able to open /dev/tty. Define LOCKPTY to add this
* exclusive locking.
*/
#undef LOCKPTY
/**********************************************************************
*
* End of User Configuration Section
*
* Rest of this file is modified by 'configure'
* Change at your own risk!
*
*/
/*
* Some defines to identify special unix variants
*/
#ifndef SVR4
#undef SVR4
#endif
#ifndef _POSIX_SOURCE
#undef _POSIX_SOURCE
#endif
/*
* Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX).
*/
#undef POSIX
/*
* Define TERMIO if you have struct termio instead of struct sgttyb.
* This is usually the case for SVID systems, where BSD uses sgttyb.
* POSIX systems should define this anyway, even though they use
* struct termios.
*/
#undef TERMIO
/*
* Define CYTERMIO if you have cyrillic termio modes.
*/
#undef CYTERMIO
/*
* Define TERMINFO if your machine emulates the termcap routines
* with the terminfo database.
* Thus the .screenrc file is parsed for
* the command 'terminfo' and not 'termcap'.
*/
#undef TERMINFO
/*
* If your library does not define ospeed, define this.
*/
#undef NEED_OSPEED
/*
* Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX)
*/
#ifndef SYSV
#undef SYSV
#endif
/*
* Define SIGVOID if your signal handlers return void. On older
* systems, signal returns int, but on newer ones, it returns void.
*/
#undef SIGVOID
/*
* Define USESIGSET if you have sigset for BSD 4.1 reliable signals.
*/
#undef USESIGSET
/*
* Define SYSVSIGS if signal handlers must be reinstalled after
* they have been called.
*/
#undef SYSVSIGS
/*
* Define BSDWAIT if your system defines a 'union wait' in <sys/wait.h>
*
* Only allow BSDWAIT i.e. wait3 on nonposix systems, since
* posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl
*
*/
#ifndef POSIX
#undef BSDWAIT
#endif
/*
* On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com
*/
#ifdef BSDWAIT
#undef USE_WAIT2
#endif
/*
* Define if you have the utempter utmp helper program
*/
#undef HAVE_UTEMPTER
/*
* If ttyslot() breaks getlogin() by returning indexes to utmp entries
* of type DEAD_PROCESS, then our getlogin() replacement should be
* selected by defining BUGGYGETLOGIN.
*/
#undef BUGGYGETLOGIN
/*
* If your system has the calls setreuid() and setregid(),
* define HAVE_SETREUID. Otherwise screen will use a forked process to
* safely create output files without retaining any special privileges.
*/
#undef HAVE_SETREUID
/*
* If your system supports BSD4.4's seteuid() and setegid(), define
* HAVE_SETEUID.
*/
#undef HAVE_SETEUID
/*
* If you want the "time" command to display the current load average
* define LOADAV. Maybe you must install screen with the needed
* privileges to read /dev/kmem.
* Note that NLIST_ stuff is only checked, when getloadavg() is not available.
*/
#undef LOADAV
#undef LOADAV_NUM
#undef LOADAV_TYPE
#undef LOADAV_SCALE
#undef LOADAV_GETLOADAVG
#undef LOADAV_UNIX
#undef LOADAV_AVENRUN
#undef LOADAV_USE_NLIST64
#undef NLIST_DECLARED
#undef NLIST_STRUCT
#undef NLIST_NAME_UNION
/*
* If your system has the new format /etc/ttys (like 4.3 BSD) and the
* getttyent(3) library functions, define GETTTYENT.
*/
#undef GETTTYENT
/*
* Define USEBCOPY if the bcopy/memcpy from your system's C library
* supports the overlapping of source and destination blocks. When
* undefined, screen uses its own (probably slower) version of bcopy().
*
* SYSV machines may have a working memcpy() -- Oh, this is
* quite unlikely. Tell me if you see one.
* "But then, memmove() should work, if at all available" he thought...
* Boing, never say "works everywhere" unless you checked SCO UNIX.
* Their memove fails the test in the configure script. Sigh. (Juergen)
*/
#undef USEBCOPY
#undef USEMEMCPY
#undef USEMEMMOVE
/*
* If your system has vsprintf() and requires the use of the macros in
* "varargs.h" to use functions with variable arguments,
* define USEVARARGS.
*/
#undef USEVARARGS
/*
* If your system has strerror() define this.
*/
#undef HAVE_STRERROR
/*
* If the select return value doesn't treat a descriptor that is
* usable for reading and writing as two hits, define SELECT_BROKEN.
*/
#undef SELECT_BROKEN
/*
* Define this if your system supports named pipes.
*/
#undef NAMEDPIPE
/*
* Define this if your system exits select() immediatly if a pipe is
* opened read-only and no writer has opened it.
*/
#undef BROKEN_PIPE
/*
* Define this if the unix-domain socket implementation doesn't
* create a socket in the filesystem.
*/
#undef SOCK_NOT_IN_FS
/*
* If your system has setenv() and unsetenv() define USESETENV
*/
#undef USESETENV
/*
* If your system does not come with a setenv()/putenv()/getenv()
* functions, you may bring in our own code by defining NEEDPUTENV.
*/
#undef NEEDPUTENV
/*
* If the passwords are stored in a shadow file and you want the
* builtin lock to work properly, define SHADOWPW.
*/
#undef SHADOWPW
/*
* If you are on a SYS V machine that restricts filename length to 14
* characters, you may need to enforce that by setting NAME_MAX to 14
*/
#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */
#undef NAME_MAX
/*
* define HAVE_RENAME if your system has a rename() function
*/
#undef HAVE_RENAME
/*
* define HAVE__EXIT if your system has the _exit() call.
*/
#undef HAVE__EXIT
/*
* define HAVE_LSTAT if your system has symlinks and the lstat() call.
*/
#undef HAVE_LSTAT
/*
* define HAVE_UTIMES if your system has the utimes() call.
*/
#undef HAVE_UTIMES
/*
* define HAVE_FCHOWN if your system has the fchown() call.
*/
#undef HAVE_FCHOWN
/*
* define HAVE_FCHMOD if your system has the fchmod() call.
*/
#undef HAVE_FCHMOD
/*
* define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib).
*/
#undef HAVE_VSNPRINTF
/*
* define HAVE_GETCWD if your system has the getcwd() call.
*/
#undef HAVE_GETCWD
/*
* define HAVE_SETLOCALE if your system has the setlocale() call.
*/
#undef HAVE_SETLOCALE
/*
* define HAVE_STRFTIME if your system has the strftime() call.
*/
#undef HAVE_STRFTIME
/*
* define HAVE_NL_LANGINFO if your system has the nl_langinfo() call
* and <langinfo.h> defines CODESET.
*/
#undef HAVE_NL_LANGINFO
/*
* Newer versions of Solaris include fdwalk, which can greatly improve
* the startup time of screen; otherwise screen spends a lot of time
* closing file descriptors.
*/
#undef HAVE_FDWALK
/*
* define HAVE_DEV_PTC if you have a /dev/ptc character special
* device.
*/
#undef HAVE_DEV_PTC
/*
* define HAVE_SVR4_PTYS if you have a /dev/ptmx character special
* device and support the ptsname(), grantpt(), unlockpt() functions.
*/
#undef HAVE_SVR4_PTYS
/*
* define HAVE_GETPT if you have the getpt() function.
*/
#undef HAVE_GETPT
/*
* define HAVE_OPENPTY if your system has the openpty() call.
*/
#undef HAVE_OPENPTY
/*
* define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen
* to unusual environments. E.g. For SunOs the defaults are "qpr" and
* "0123456789abcdef". For SunOs 4.1.2
* #define PTYRANGE0 "pqrstuvwxyzPQRST"
* is recommended by Dan Jacobson.
*/
#undef PTYRANGE0
#undef PTYRANGE1
#define USEVARARGS
Go to most recent revision | Compare with Previous | Blame | View Log