URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [newlib-1.18.0/] [newlib-1.18.0-or32-1.0rc1/] [libgloss/] [bfin/] [Makefile.in] - Rev 594
Go to most recent revision | Compare with Previous | Blame | View Log
#
#
DESTDIR =
VPATH = @srcdir@ @srcdir@/..
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..
top_srcdir = @top_srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =
SHELL = /bin/sh
mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
CC = @CC@
AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@
OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
then echo ${objroot}/../binutils/objdump ; \
else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
then echo ${objroot}/../binutils/objcopy ; \
else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
OBJS =
CFLAGS =
SCRIPTS =
# Here is all of the simulator stuff
SIM_SCRIPTS =
SIM_LDFLAGS =
SIM_BSP = libsim.a
SIM_CRT0 = crt0.o
SIM_OBJS = syscalls.o
SIM_TEST = sim-test
SIM_INSTALL = install-sim
# Here is all of the development board stuff
BOARD_SCRIPTS = bfin-common-sc.ld bfin-common-mc.ld \
bf512.ld bf514.ld bf516.ld bf518.ld \
bf522.ld bf523.ld bf524.ld bf525.ld bf526.ld bf527.ld \
bf531.ld bf532.ld bf533.ld \
bf534.ld bf536.ld bf537.ld \
bf538.ld bf539.ld \
bf542.ld bf544.ld bf547.ld bf548.ld bf549.ld \
bf561.ld bf561a.ld bf561b.ld bf561m.ld
BOARD_LDFLAGS =
BOARD_BSP = # We actually use libnosys.a
BOARD_CRT0S = basiccrt.o basiccrts.o
BOARD_CRT0S += basiccrt561.o basiccrt561s.o basiccrt561b.o
BOARD_OBJS =
BOARD_TEST =
BOARD_INSTALL = install-board
# Host specific makefile fragment comes in here.
@host_makefile_frag@
INCLUDES += -I$(srcdir)/include
#
# build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
all: ${SIM_CRT0} ${SIM_BSP} ${BOARD_CRT0S} ${BOARD_BSP}
#
# here's where we build the board support packages for each target
#
${SIM_BSP}: ${OBJS} ${SIM_OBJS}
${AR} ${ARFLAGS} ${SIM_BSP} ${SIM_OBJS} ${OBJS}
${RANLIB} ${SIM_BSP}
#
#
#
crt0.o: crt0.S
basiccrt.o: basiccrt.S
ifeq (,$(findstring mcpu=,$(CFLAGS)))
$(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf532-any -o $@ -c $<
else
$(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -o $@ -c $<
endif
basiccrts.o: basiccrt.S
ifeq (,$(findstring mcpu=,$(CFLAGS)))
$(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf532-any -o $@ -c $<
else
$(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -o $@ -c $<
endif
basiccrt561.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
$(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-none -o $@ -c $<
else
$(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-any -o $@ -c $<
endif
basiccrt561s.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
$(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-none -o $@ -c $<
else
$(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-any -o $@ -c $<
endif
basiccrt561b.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
$(CC) -D__ADSPBF561_COREB__ $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-none -o $@ -c $<
else
$(CC) -D__ADSPBF561_COREB__ $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-any -o $@ -c $<
endif
clean mostlyclean:
rm -f a.out core *.i *.o ${SIM_BSP} ${BOARD_BSP}
distclean maintainer-clean realclean: clean
rm -f Makefile config.status *~
.PHONY: install info install-info clean-info
install: ${SIM_INSTALL} ${BOARD_INSTALL}
install-sim:
for x in ${SIM_CRT0} ${SIM_BSP} ${SIM_SCRIPTS}; do \
${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
done
install-board:
for x in ${BOARD_CRT0S} ${BOARD_BSP}; do \
${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
done
-if [ -z "${MULTISUBDIR}" ]; then \
for x in ${BOARD_SCRIPTS}; do \
${INSTALL_DATA} ${srcdir}/$$x $(DESTDIR)${tooldir}/lib/$$x; \
done; \
${mkinstalldirs} ${DESTDIR}${tooldir}/include; \
for i in ${srcdir}/include/*.h; do \
${INSTALL_DATA} $$i ${DESTDIR}${tooldir}/include/`basename $$i`; \
done; \
${mkinstalldirs} ${DESTDIR}${tooldir}/include/sys; \
for i in ${srcdir}/include/sys/*.h; do \
${INSTALL_DATA} $$i ${DESTDIR}${tooldir}/include/sys/`basename $$i`; \
done; \
else true; fi
doc:
info:
install-info:
clean-info:
Makefile: Makefile.in config.status @host_makefile_frag_path@
$(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
Go to most recent revision | Compare with Previous | Blame | View Log