URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [newlib-1.18.0/] [newlib-1.18.0-or32-1.0rc2/] [newlib/] [libc/] [machine/] [hppa/] [memcpy.S] - Rev 520
Compare with Previous | Blame | View Log
/*
* (c) Copyright 1986 HEWLETT-PACKARD COMPANY
*
* To anyone who acknowledges that this file is provided "AS IS"
* without any express or implied warranty:
* permission to use, copy, modify, and distribute this file
* for any purpose is hereby granted without fee, provided that
* the above copyright notice and this notice appears in all
* copies, and that the name of Hewlett-Packard Company not be
* used in advertising or publicity pertaining to distribution
* of the software without specific, written prior permission.
* Hewlett-Packard Company makes no representations about the
* suitability of this software for any purpose.
*/
/* HPUX_ID: @(#) $Revision: 1.1 $ */
/*
* memcpy(s1, s2, n)
*
* Copy n characters from s2 to s1; returns s1.
*/
#define d_addr arg0
#define s_addr arg1
#define count arg2
#define tmp5 arg3
#define tmp1 r19
#define tmp2 r20
#define tmp3 r21
#define tmp4 r22
#define tmp6 r31
#include "DEFS.h"
ENTRY(memcpy)
comib,>= 5,count,byteloop /* If count is <= 6 don't get fancy.*/
movb,=,n d_addr,ret0,done /* The return value is defined to be the value of d_addr. DELAY SLOT */
/* if d_addr is null then exit */
extru s_addr,31,2,tmp1 /* Extract the low two bits of the source address. */
extru d_addr,31,2,tmp2 /* Extract the low two bits of the destination address. */
add count,tmp2,count /* pre increment the count to adjust for alignment of s1 */
comb,<> tmp2,tmp1,not_aligned /* see if s1 is aligned w.r.t. s2. */
dep 0,31,2,s_addr /* Compute the word address of the source. DELAY SLOT. */
/* aligned */
/* We will now begin the 16 byte at a time word move if count >= 16 ! */
/* Else we will branch to the 4 byte-at-a time word move ! */
addibt,<,n -16,count,chekchunk /* If count < 16 then we can't move 16 byte chunks ! */
/* actually we can legally move 13 or more bytes on the first loop. */
/* These loads and stores are done so as to prevent processor interlock. */
chunks:
ldwm 16(0,s_addr),tmp1 /* tmp1 = *s_addr s_addr += 16 */
ldw -12(0,s_addr),tmp2 /* tmp2 = 2nd word */
ldw -8(0,s_addr),tmp3 /* tmp3 = 3rd word */
ldw -4(0,s_addr),tmp4 /* tmp4 = 4th word */
/* Now store the results ! */
stbys,b,m tmp1,4(0,d_addr) /* tmp1 = 1st word stored d_addr += 16 also take care of front porch. */
stwm tmp2,4(0,d_addr) /* tmp2 = 2nd word stored. */
stwm tmp3,4(0,d_addr) /* tmp3 = 3rd word stored. */
addibf,< -16,count,chunks /* If count is still >= 16 do another loop. */
stwm tmp4,4(0,d_addr) /* tmp4 = 4th word stored. DELAY SLOT */
chekchunk:
addibt,<,n 12,count,back_porch /* since the count is already decremented by -16 we're testing */
/* to see if there are at least 4 bytes left ? */
subchunk:
ldws,ma 4(s_addr),tmp1 /* tmp1 = *s_addr++ */
addibf,< -4,count,subchunk /* count -= 4 */
stbys,b,m tmp1,4(d_addr) /* *d_addr++ = tmp1 */
back_porch:
addibt,=,n 4,count,done /* if count = 0 we're, of course, done ! */
ldws 0(s_addr),tmp1 /* load up the back_porch */
add d_addr,count,d_addr/* final store address is +1 too high ! */
bv 0(r2) /* return--were done. */
stbys,e tmp1,0(d_addr) /* kerplunk! whew ! */
/* Begin non_aligned code. (no refrence to politics) */
not_aligned:
sub,>= tmp2,tmp1,tmp3 /* compute the shift quantity again and skip the load if tmp2 > tmp1. */
ldwm 4(0,s_addr),tmp1 /* load up the first word from the source. tmp1 = *s_addr++ */
zdep tmp3,28,29,tmp4 /* compute the number of bits to shift based on the number of bytes above. */
mtctl tmp4,11 /* load the shift count into cr11 = shift count register. */
addibt,<,n -16,count,chkchnk2 /* first step in pre adjustment of count for looping. */
chunk2:
ldwm 16(0,s_addr),tmp2 /* get either first or second word . tmp2 = *s_addr++ */
ldw -12(s_addr),tmp3
ldw -8(s_addr),tmp4
ldw -4(s_addr),tmp5
vshd tmp1,tmp2,tmp6 /* position data ! */
stbys,b,m tmp6,4(0,d_addr) /* store ! */
vshd tmp2,tmp3,tmp6 /* position data ! */
stwm tmp6,4(0,d_addr) /* store ! */
vshd tmp3,tmp4,tmp6 /* position data ! */
stwm tmp6,4(0,d_addr) /* store ! */
vshd tmp4,tmp5,tmp6 /* position data ! */
stwm tmp6,4(0,d_addr) /* store the data ! */
addibf,< -16,count,chunk2 /* If count is still >= 16 do another loop. */
copy tmp5,tmp1
chkchnk2:
addibt,<,n 12,count,bp_0 /* if we don't have 4 bytes left then do the back porch (bp_0) */
subchnk2:
ldwm 4(0,s_addr),tmp2 /* get next word ! */
vshd tmp1,tmp2,tmp3 /* position data ! */
addibt,< -4,count,bp_1 /* decrement count and when count < 4 goto back_porch (bp_1) */
stbys,b,m tmp3,4(0,d_addr) /* store ! */
ldwm 4(0,s_addr),tmp1 /* get 4th word ! */
vshd tmp2,tmp1,tmp3 /* position data ! */
addib,>= -4,count,subchnk2 /* decrement count and when count <= 4 go to back porch (bp_2) */
stbys,b,m tmp3,4(0,d_addr) /* store the data ! */
bp_0: copy tmp1,tmp2 /* switch registers used in the shift process. */
bp_1: addibt,<=,n 4,count,done /* if count = -4 this implies that count = 0 -> done */
add d_addr,count,d_addr /* bump destination address to be +1 too high ! */
mfctl sar,tmp3 /* suppress final ldwm unless result used */
extru tmp3,28,2,tmp3 /* convert bitshift to byteshift */
sub,<= count,tmp3,r0 /* bytes unused if (count-byteshift <= 0*/
ldwm 4(0,s_addr),tmp1 /* get final word ! */
vshd tmp2,tmp1,tmp3 /* position data ! */
bv 0(r2) /* return */
stbys,e tmp3,0(0,d_addr) /* store the data ! */
/* here we do ye old byte-at-a-time moves. */
byteloop:
comb,>=,n 0,count,done
encore:
ldbs,ma 1(s_addr),tmp1
addibf,= -1,count,encore
stbs,ma tmp1,1(d_addr)
done:
EXIT(memcpy)