URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [gnu-src/] [newlib-1.18.0/] [newlib-1.18.0-or32-1.0rc2/] [newlib/] [libc/] [machine/] [m32c/] [setjmp.S] - Rev 520
Compare with Previous | Blame | View Log
/*
Copyright (c) 2005 Red Hat Incorporated.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
The name of Red Hat Incorporated may not be used to endorse
or promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#if defined(__r8c_cpu__) || defined(__m16c_cpu__)
#define A16 1
#endif
/* We implement setjmp/longjmp much like the way gcc implements
exceptions - we create new stack frames, then switch to them and
return. Thus, the two setjmp's below each push all the relevent
registers, then copy the whole frame into the buffer (first $sp is
moved, then smovf copies the frame itself), and the two longjmps
restore $sp, copy the frame back into place, and issue the same
return as the setjmp would have used.
Since the sizes of registers differs between the 16 and 24 bit
models, we provide separate implementations for each rather than
trying to parameterize them.
Jump buffer sizes: 21 bytes for 16 bit, 34 bytes for 24 bit.
*/
.text
#ifdef A16 /* 16 bit versions */
.global _setjmp
_setjmp:
enter #0
pushm r1,r2,r3,a0,a1,sb,fb
; At this point, the stack looks like this:
; ... [pc:3] [oldfb:2] <fb> [r1:2] [r2:2] [r3:2] [a0:2] [a1:2] [sb:2] [fb:2] <sp> */
mov.w r1,a1 ; a1 is the destination of smovf
mov.b #0,r1h
stc sp,a0 ; r1h:a0 is the source of smovf
mov.w a0,[a1]
add.w #2,a1
mov.w #19,r3 ; plus two for sp later
smovf.b
; Return 0 to caller.
mov.w #0,r0
popm r1,r2,r3,a0,a1,sb,fb
exitd
.global _longjmp
_longjmp:
enter #0
mov.w r1,a0 ; pointer to jump buf
mov.w r2,r0 ; setjmp's "new" return value
mov.b #0,r1h ; r1h: a0 is the source, now jmpbuf
mov.w [a0],a1 ; dest is new stack
ldc a1,sp
add.w #2,a0
mov.w #19,r3
smovf.b
;; now return to our caller with this newly restored frame
popm r1,r2,r3,a0,a1,sb,fb
exitd
#else /* 24 bit versions */
.global _setjmp
_setjmp:
enter #0
pushm r1,r2,r3,a0,a1,sb,fb
; At this point, the stack looks like this:
; ... [jbuf:4] [pc:4] [oldfb:4] <fb> [r1:2] [r2:2] [r3:2] [a0:4] [a1:4] [sb:4] [fb:4] <sp> */
mov.l 8[fb],a1 ; a1 is the destination of smovf
stc sp,a0 ; r1h:a0 is the source of smovf
mov.l a0,[a1]
add.l #4,a1
mov.w #30,r3 ; plus two for sp later
smovf.b
; Return 0 to caller.
mov.w #0,r0
popm r1,r2,r3,a0,a1,sb,fb
exitd
.global _longjmp
_longjmp:
enter #0
; ... [rv:2] [jbuf:4] [pc:4] [oldfb:4] <fb>
mov.l 8[fb],a0 ; pointer to jump buf
mov.w 12[fb],r0 ; setjmp's "new" return value
mov.l [a0],a1 ; dest is new stack
ldc a1,sp
add.l #4,a0
mov.w #30,r3
smovf.b
;; now return to our caller with this newly restored frame
popm r1,r2,r3,a0,a1,sb,fb
exitd
#endif