URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [tags/] [gnu-src/] [newlib-1.18.0/] [newlib-1.18.0-or32-1.0rc2/] [newlib/] [libc/] [string/] [strerror.c] - Rev 520
Compare with Previous | Blame | View Log
/*** **** CAUTION!!! KEEP DOC CONSISTENT---if you change text of a message **** here, change two places: **** 1) the leading doc section (alphabetized by macro) **** 2) the real text inside switch(errnum) ***/ /* FUNCTION <<strerror>>---convert error number to string INDEX strerror ANSI_SYNOPSIS #include <string.h> char *strerror(int <[errnum]>); TRAD_SYNOPSIS #include <string.h> char *strerror(<[errnum]>) int <[errnum]>; DESCRIPTION <<strerror>> converts the error number <[errnum]> into a string. The value of <[errnum]> is usually a copy of <<errno>>. If <<errnum>> is not a known error number, the result points to an empty string. This implementation of <<strerror>> prints out the following strings for each of the values defined in `<<errno.h>>': o+ o E2BIG Arg list too long o EACCES Permission denied o EADDRINUSE Address already in use o EADV Advertise error o EAFNOSUPPORT Address family not supported by protocol family o EAGAIN No more processes o EALREADY Socket already connected o EBADF Bad file number o EBADMSG Bad message o EBUSY Device or resource busy o ECHILD No children o ECOMM Communication error o ECONNABORTED Software caused connection abort o ECONNREFUSED Connection refused o EDEADLK Deadlock o EDESTADDRREQ Destination address required o EEXIST File exists o EDOM Math argument o EFAULT Bad address o EFBIG File too large o EHOSTDOWN Host is down o EHOSTUNREACH Host is unreachable o EIDRM Identifier removed o EINPROGRESS Connection already in progress o EINTR Interrupted system call o EINVAL Invalid argument o EIO I/O error o EISCONN Socket is already connected o EISDIR Is a directory o ELIBACC Cannot access a needed shared library o ELIBBAD Accessing a corrupted shared library o ELIBEXEC Cannot exec a shared library directly o ELIBMAX Attempting to link in more shared libraries than system limit o ELIBSCN <<.lib>> section in a.out corrupted o EMFILE Too many open files o EMLINK Too many links o EMSGSIZE Message too long o EMULTIHOP Multihop attempted o ENAMETOOLONG File or path name too long o ENETDOWN Network interface not configured o ENETUNREACH Network is unreachable o ENFILE Too many open files in system o ENODEV No such device o ENOENT No such file or directory o ENOEXEC Exec format error o ENOLCK No lock o ENOLINK Virtual circuit is gone o ENOMEM Not enough space o ENOMSG No message of desired type o ENONET Machine is not on the network o ENOPKG No package o ENOPROTOOPT Protocol not available o ENOSPC No space left on device o ENOSR No stream resources o ENOSTR Not a stream o ENOSYS Function not implemented o ENOTBLK Block device required o ENOTCONN Socket is not connected o ENOTDIR Not a directory o ENOTEMPTY Directory not empty o ENOTSOCK Socket operation on non-socket o ENOTSUP Not supported o ENOTTY Not a character device o ENXIO No such device or address o EPERM Not owner o EPIPE Broken pipe o EPROTO Protocol error o EPROTOTYPE Protocol wrong type for socket o EPROTONOSUPPORT Unknown protocol o ERANGE Result too large o EREMOTE Resource is remote o EROFS Read-only file system o ESHUTDOWN Can't send after socket shutdown o ESOCKTNOSUPPORT Socket type not supported o ESPIPE Illegal seek o ESRCH No such process o ESRMNT Srmount error o ETIME Stream ioctl timeout o ETIMEDOUT Connection timed out o ETXTBSY Text file busy o EXDEV Cross-device link o ECANCELED Operation canceled o ENOTRECOVERABLE State not recoverable o EOWNERDEAD Previous owner died o ESTRPIPE Strings pipe error o- RETURNS This function returns a pointer to a string. Your application must not modify that string. PORTABILITY ANSI C requires <<strerror>>, but does not specify the strings used for each error number. Although this implementation of <<strerror>> is reentrant, ANSI C declares that subsequent calls to <<strerror>> may overwrite the result string; therefore portable code cannot depend on the reentrancy of this subroutine. This implementation of <<strerror>> provides for user-defined extensibility. <<errno.h>> defines <[__ELASTERROR]>, which can be used as a base for user-defined error values. If the user supplies a routine named <<_user_strerror>>, and <[errnum]> passed to <<strerror>> does not match any of the supported values, <<_user_strerror>> is called with <[errnum]> as its argument. <<_user_strerror>> takes one argument of type <[int]>, and returns a character pointer. If <[errnum]> is unknown to <<_user_strerror>>, <<_user_strerror>> returns <[NULL]>. The default <<_user_strerror>> returns <[NULL]> for all input values. <<strerror>> requires no supporting OS subroutines. QUICKREF strerror ansi pure */ #include <errno.h> #include <string.h> char * _DEFUN (strerror, (errnum), int errnum) { char *error; extern char *_user_strerror _PARAMS ((int)); switch (errnum) { /* go32 defines EPERM as EACCES */ #if defined (EPERM) && (!defined (EACCES) || (EPERM != EACCES)) case EPERM: error = "Not owner"; break; #endif #ifdef ENOENT case ENOENT: error = "No such file or directory"; break; #endif #ifdef ESRCH case ESRCH: error = "No such process"; break; #endif #ifdef EINTR case EINTR: error = "Interrupted system call"; break; #endif #ifdef EIO case EIO: error = "I/O error"; break; #endif /* go32 defines ENXIO as ENODEV */ #if defined (ENXIO) && (!defined (ENODEV) || (ENXIO != ENODEV)) case ENXIO: error = "No such device or address"; break; #endif #ifdef E2BIG case E2BIG: error = "Arg list too long"; break; #endif #ifdef ENOEXEC case ENOEXEC: error = "Exec format error"; break; #endif #ifdef EALREADY case EALREADY: error = "Socket already connected"; break; #endif #ifdef EBADF case EBADF: error = "Bad file number"; break; #endif #ifdef ECHILD case ECHILD: error = "No children"; break; #endif #ifdef EDESTADDRREQ case EDESTADDRREQ: error = "Destination address required"; break; #endif #ifdef EAGAIN case EAGAIN: error = "No more processes"; break; #endif #ifdef ENOMEM case ENOMEM: error = "Not enough space"; break; #endif #ifdef EACCES case EACCES: error = "Permission denied"; break; #endif #ifdef EFAULT case EFAULT: error = "Bad address"; break; #endif #ifdef ENOTBLK case ENOTBLK: error = "Block device required"; break; #endif #ifdef EBUSY case EBUSY: error = "Device or resource busy"; break; #endif #ifdef EEXIST case EEXIST: error = "File exists"; break; #endif #ifdef EXDEV case EXDEV: error = "Cross-device link"; break; #endif #ifdef ENODEV case ENODEV: error = "No such device"; break; #endif #ifdef ENOTDIR case ENOTDIR: error = "Not a directory"; break; #endif #ifdef EHOSTDOWN case EHOSTDOWN: error = "Host is down"; break; #endif #ifdef EINPROGRESS case EINPROGRESS: error = "Connection already in progress"; break; #endif #ifdef EISDIR case EISDIR: error = "Is a directory"; break; #endif #ifdef EINVAL case EINVAL: error = "Invalid argument"; break; #endif #ifdef ENETDOWN case ENETDOWN: error = "Network interface is not configured"; break; #endif #ifdef ENFILE case ENFILE: error = "Too many open files in system"; break; #endif #ifdef EMFILE case EMFILE: error = "Too many open files"; break; #endif #ifdef ENOTTY case ENOTTY: error = "Not a character device"; break; #endif #ifdef ETXTBSY case ETXTBSY: error = "Text file busy"; break; #endif #ifdef EFBIG case EFBIG: error = "File too large"; break; #endif #ifdef EHOSTUNREACH case EHOSTUNREACH: error = "Host is unreachable"; break; #endif #ifdef ENOSPC case ENOSPC: error = "No space left on device"; break; #endif #ifdef ENOTSUP case ENOTSUP: error = "Not supported"; break; #endif #ifdef ESPIPE case ESPIPE: error = "Illegal seek"; break; #endif #ifdef EROFS case EROFS: error = "Read-only file system"; break; #endif #ifdef EMLINK case EMLINK: error = "Too many links"; break; #endif #ifdef EPIPE case EPIPE: error = "Broken pipe"; break; #endif #ifdef EDOM case EDOM: error = "Math argument"; break; #endif #ifdef ERANGE case ERANGE: error = "Result too large"; break; #endif #ifdef ENOMSG case ENOMSG: error = "No message of desired type"; break; #endif #ifdef EIDRM case EIDRM: error = "Identifier removed"; break; #endif #ifdef EDEADLK case EDEADLK: error = "Deadlock"; break; #endif #ifdef ENETUNREACH case ENETUNREACH: error = "Network is unreachable"; break; #endif #ifdef ENOLCK case ENOLCK: error = "No lock"; break; #endif #ifdef ENOSTR case ENOSTR: error = "Not a stream"; break; #endif #ifdef ETIME case ETIME: error = "Stream ioctl timeout"; break; #endif #ifdef ENOSR case ENOSR: error = "No stream resources"; break; #endif #ifdef ENONET case ENONET: error = "Machine is not on the network"; break; #endif #ifdef ENOPKG case ENOPKG: error = "No package"; break; #endif #ifdef EREMOTE case EREMOTE: error = "Resource is remote"; break; #endif #ifdef ENOLINK case ENOLINK: error = "Virtual circuit is gone"; break; #endif #ifdef EADV case EADV: error = "Advertise error"; break; #endif #ifdef ESRMNT case ESRMNT: error = "Srmount error"; break; #endif #ifdef ECOMM case ECOMM: error = "Communication error"; break; #endif #ifdef EPROTO case EPROTO: error = "Protocol error"; break; #endif #ifdef EPROTONOSUPPORT case EPROTONOSUPPORT: error = "Unknown protocol"; break; #endif #ifdef EMULTIHOP case EMULTIHOP: error = "Multihop attempted"; break; #endif #ifdef EBADMSG case EBADMSG: error = "Bad message"; break; #endif #ifdef ELIBACC case ELIBACC: error = "Cannot access a needed shared library"; break; #endif #ifdef ELIBBAD case ELIBBAD: error = "Accessing a corrupted shared library"; break; #endif #ifdef ELIBSCN case ELIBSCN: error = ".lib section in a.out corrupted"; break; #endif #ifdef ELIBMAX case ELIBMAX: error = "Attempting to link in more shared libraries than system limit"; break; #endif #ifdef ELIBEXEC case ELIBEXEC: error = "Cannot exec a shared library directly"; break; #endif #ifdef ENOSYS case ENOSYS: error = "Function not implemented"; break; #endif #ifdef ENMFILE case ENMFILE: error = "No more files"; break; #endif #ifdef ENOTEMPTY case ENOTEMPTY: error = "Directory not empty"; break; #endif #ifdef ENAMETOOLONG case ENAMETOOLONG: error = "File or path name too long"; break; #endif #ifdef ELOOP case ELOOP: error = "Too many symbolic links"; break; #endif #ifdef ENOBUFS case ENOBUFS: error = "No buffer space available"; break; #endif #ifdef EAFNOSUPPORT case EAFNOSUPPORT: error = "Address family not supported by protocol family"; break; #endif #ifdef EPROTOTYPE case EPROTOTYPE: error = "Protocol wrong type for socket"; break; #endif #ifdef ENOTSOCK case ENOTSOCK: error = "Socket operation on non-socket"; break; #endif #ifdef ENOPROTOOPT case ENOPROTOOPT: error = "Protocol not available"; break; #endif #ifdef ESHUTDOWN case ESHUTDOWN: error = "Can't send after socket shutdown"; break; #endif #ifdef ECONNREFUSED case ECONNREFUSED: error = "Connection refused"; break; #endif #ifdef EADDRINUSE case EADDRINUSE: error = "Address already in use"; break; #endif #ifdef ECONNABORTED case ECONNABORTED: error = "Software caused connection abort"; break; #endif #if (defined(EWOULDBLOCK) && (!defined (EAGAIN) || (EWOULDBLOCK != EAGAIN))) case EWOULDBLOCK: error = "Operation would block"; break; #endif #ifdef ENOTCONN case ENOTCONN: error = "Socket is not connected"; break; #endif #ifdef ESOCKTNOSUPPORT case ESOCKTNOSUPPORT: error = "Socket type not supported"; break; #endif #ifdef EISCONN case EISCONN: error = "Socket is already connected"; break; #endif #ifdef ECANCELED case ECANCELED: error = "Operation canceled"; break; #endif #ifdef ENOTRECOVERABLE case ENOTRECOVERABLE: error = "State not recoverable"; break; #endif #ifdef EOWNERDEAD case EOWNERDEAD: error = "Previous owner died"; break; #endif #ifdef ESTRPIPE case ESTRPIPE: error = "Streams pipe error"; break; #endif #if defined(EOPNOTSUPP) && (!defined(ENOTSUP) || (ENOTSUP != EOPNOTSUPP)) case EOPNOTSUPP: error = "Operation not supported on socket"; break; #endif #ifdef EMSGSIZE case EMSGSIZE: error = "Message too long"; break; #endif #ifdef ETIMEDOUT case ETIMEDOUT: error = "Connection timed out"; break; #endif default: if ((error = _user_strerror (errnum)) == 0) error = ""; break; } return error; }