URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [tags/] [or1200/] [rel2/] [rtl/] [verilog/] [or1200_rf.v] - Rev 196
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's register file inside CPU //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/cores/or1k/ //// //// //// //// Description //// //// Instantiation of register file memories //// //// //// //// To Do: //// //// - make it smaller and faster //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.2 2002/06/08 16:19:09 lampret // Added generic flip-flop based memory macro instantiation. // // Revision 1.1 2002/01/03 08:16:15 lampret // New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. // // Revision 1.13 2001/11/20 18:46:15 simons // Break point bug fixed // // Revision 1.12 2001/11/13 10:02:21 lampret // Added 'setpc'. Renamed some signals (except_flushpipe into flushpipe etc) // // Revision 1.11 2001/11/12 01:45:40 lampret // Moved flag bit into SR. Changed RF enable from constant enable to dynamic enable for read ports. // // Revision 1.10 2001/11/10 03:43:57 lampret // Fixed exceptions. // // Revision 1.9 2001/10/21 17:57:16 lampret // Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. // // Revision 1.8 2001/10/14 13:12:10 lampret // MP3 version. // // Revision 1.1.1.1 2001/10/06 10:18:36 igorm // no message // // Revision 1.3 2001/08/09 13:39:33 lampret // Major clean-up. // // Revision 1.2 2001/07/22 03:31:54 lampret // Fixed RAM's oen bug. Cache bypass under development. // // Revision 1.1 2001/07/20 00:46:21 lampret // Development version of RTL. Libraries are missing. // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_rf( // Clock and reset clk, rst, // Write i/f supv, wb_freeze, addrw, dataw, we, flushpipe, // Read i/f id_freeze, addra, addrb, dataa, datab, rda, rdb, // Debug spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o ); parameter dw = `OR1200_OPERAND_WIDTH; parameter aw = `OR1200_REGFILE_ADDR_WIDTH; // // I/O // // // Clock and reset // input clk; input rst; // // Write i/f // input supv; input wb_freeze; input [aw-1:0] addrw; input [dw-1:0] dataw; input we; input flushpipe; // // Read i/f // input id_freeze; input [aw-1:0] addra; input [aw-1:0] addrb; output [dw-1:0] dataa; output [dw-1:0] datab; input rda; input rdb; // // SPR access for debugging purposes // input spr_cs; input spr_write; input [31:0] spr_addr; input [31:0] spr_dat_i; output [31:0] spr_dat_o; // // Internal wires and regs // wire [dw-1:0] from_rfa; wire [dw-1:0] from_rfb; reg [dw:0] dataa_saved; reg [dw:0] datab_saved; wire [aw-1:0] rf_addra; wire [aw-1:0] rf_addrw; wire [dw-1:0] rf_dataw; wire rf_we; wire spr_valid; wire rf_ena; wire rf_enb; reg rf_we_allow; // // SPR access is valid when spr_cs is asserted and // SPR address matches GPR addresses // assign spr_valid = spr_cs & (spr_addr[10:5] == `OR1200_SPR_RF); // // SPR data output is always from RF A // assign spr_dat_o = from_rfa; // // Operand A comes from RF or from saved A register // assign dataa = (dataa_saved[32]) ? dataa_saved[31:0] : from_rfa; // // Operand B comes from RF or from saved B register // assign datab = (datab_saved[32]) ? datab_saved[31:0] : from_rfb; // // RF A read address is either from SPRS or normal from CPU control // assign rf_addra = (spr_valid & !spr_write) ? spr_addr[4:0] : addra; // // RF write address is either from SPRS or normal from CPU control // assign rf_addrw = (spr_valid & spr_write) ? spr_addr[4:0] : addrw; // // RF write data is either from SPRS or normal from CPU datapath // assign rf_dataw = (spr_valid & spr_write) ? spr_dat_i : dataw; // // RF write enable is either from SPRS or normal from CPU control // always @(posedge rst or posedge clk) if (rst) rf_we_allow <= #1 1'b1; else if (~wb_freeze) rf_we_allow <= #1 ~flushpipe; assign rf_we = ((spr_valid & spr_write) | (we & ~wb_freeze)) & rf_we_allow & (supv | (|rf_addrw)); // // CS RF A asserted when instruction reads operand A and ID stage // is not stalled // assign rf_ena = rda & ~id_freeze | spr_valid; // probably works with fixed binutils // assign rf_ena = 1'b1; // does not work with single-stepping //assign rf_ena = ~id_freeze | spr_valid; // works with broken binutils // // CS RF B asserted when instruction reads operand B and ID stage // is not stalled // assign rf_enb = rdb & ~id_freeze | spr_valid; // assign rf_enb = 1'b1; //assign rf_enb = ~id_freeze | spr_valid; // works with broken binutils // // Stores operand from RF_A into temp reg when pipeline is frozen // always @(posedge clk or posedge rst) if (rst) begin dataa_saved <= #1 33'b0; end else if (id_freeze & !dataa_saved[32]) begin dataa_saved <= #1 {1'b1, from_rfa}; end else if (!id_freeze) dataa_saved <= #1 33'b0; // // Stores operand from RF_B into temp reg when pipeline is frozen // always @(posedge clk or posedge rst) if (rst) begin datab_saved <= #1 33'b0; end else if (id_freeze & !datab_saved[32]) begin datab_saved <= #1 {1'b1, from_rfb}; end else if (!id_freeze) datab_saved <= #1 33'b0; `ifdef OR1200_RFRAM_TWOPORT // // Instantiation of register file two-port RAM A // or1200_tpram_32x32 rf_a( // Port A .clk_a(clk), .rst_a(rst), .ce_a(rf_ena), .we_a(1'b0), .oe_a(1'b1), .addr_a(rf_addra), .di_a(32'h0000_0000), .do_a(from_rfa), // Port B .clk_b(clk), .rst_b(rst), .ce_b(rf_we), .we_b(rf_we), .oe_b(1'b0), .addr_b(rf_addrw), .di_b(rf_dataw), .do_b() ); // // Instantiation of register file two-port RAM B // or1200_tpram_32x32 rf_b( // Port A .clk_a(clk), .rst_a(rst), .ce_a(rf_enb), .we_a(1'b0), .oe_a(1'b1), .addr_a(addrb), .di_a(32'h0000_0000), .do_a(from_rfb), // Port B .clk_b(clk), .rst_b(rst), .ce_b(rf_we), .we_b(rf_we), .oe_b(1'b0), .addr_b(rf_addrw), .di_b(rf_dataw), .do_b() ); `else `ifdef OR1200_RFRAM_DUALPORT // // Instantiation of register file two-port RAM A // or1200_dpram_32x32 rf_a( // Port A .clk_a(clk), .rst_a(rst), .ce_a(rf_ena), .oe_a(1'b1), .addr_a(rf_addra), .do_a(from_rfa), // Port B .clk_b(clk), .rst_b(rst), .ce_b(rf_we), .we_b(rf_we), .addr_b(rf_addrw), .di_b(rf_dataw) ); // // Instantiation of register file two-port RAM B // or1200_dpram_32x32 rf_b( // Port A .clk_a(clk), .rst_a(rst), .ce_a(rf_enb), .oe_a(1'b1), .addr_a(addrb), .do_a(from_rfb), // Port B .clk_b(clk), .rst_b(rst), .ce_b(rf_we), .we_b(rf_we), .addr_b(rf_addrw), .di_b(rf_dataw) ); `else `ifdef OR1200_RFRAM_GENERIC // // Instantiation of generic (flip-flop based) register file // or1200_rfram_generic rf_a( // Clock and reset .clk(clk), .rst(rst), // Port A .ce_a(rf_ena), .addr_a(rf_addra), .do_a(from_rfa), // Port B .ce_b(rf_enb), .addr_b(addrb), .do_b(from_rfb), // Port W .ce_w(rf_we), .we_w(rf_we), .addr_w(rf_addrw), .di_w(rf_dataw) ); `else // // RFRAM type not specified // initial begin $display("Define RFRAM type."); $finish; end `endif `endif `endif endmodule
Go to most recent revision | Compare with Previous | Blame | View Log