URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [tags/] [or1ksim/] [or1ksim-0.4.0rc1/] [testsuite/] [libsim.tests/] [jtag-go-command-write.exp] - Rev 149
Go to most recent revision | Compare with Previous | Blame | View Log
# jtag-go-command-write.exp. Tests of the library JTAG GO_COMMAND for writing
# Copyright (C) 2010 Embecosm Limited
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
# This file is part of OpenRISC 1000 Architectural Simulator.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http:#www.gnu.org/licenses/>. */
# -----------------------------------------------------------------------------
# This code is commented throughout for use with Doxygen.
# -----------------------------------------------------------------------------
# These tests check all the behavior associated with the JTAG GO_COMMAND when
# writing.
# NOTE. All these tests return timing information, but we ignore it, since in
# general it will not be repeatable.
# Tests of the GO_COMMAND for writing to different modules. This should work
# fine for Wishbone and CPU0. Other modules will have been weeded out by the
# prior WRITE_COMMAND. We specify 4 bytes to read each time.
# We use the loop-report OpenRISC program here, since we must be sure that
# values written make it to the target As SPR's we use MACLO (0x2801) and
# MACHI (0x2802). As Wishbone we use address 0x100000 - 0x12ffff. Changes to
# values in the first 16 bytes following 0x100000, 0x110000 and 0x120000 are
# reported.
# When testing GO_COMMAND (write) after invalid module selection, we cannot
# guarantee a CRC mismatch (or at least I can't do the maths to prove that no
# register of all zeros can have a valid CRC field for the possible GO_COMMAND
# register lengths, although it is highly likely), so we just look for the
# error message.
# GO_COMMAND writing with no module selection (address 0x100000).
run_libsim "JTAG SELECT_MODULE GO_COMMAND (write) no module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
"ERROR: JTAG WRITE_COMMAND with no module selected." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
"ERROR: JTAG GO_COMMAND with no prior WRITE_COMMAND." \
" shifted out: 0x0000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"WRITE_COMMAND" "2" "100000" "4" "GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND writing with only invalid module selected.
run_libsim "JTAG GO_COMMAND (write) invalid module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001993c98e69" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
"ERROR: JTAG WRITE_COMMAND for CPU1 not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
"ERROR: JTAG GO_COMMAND with no prior WRITE_COMMAND." \
" shifted out: 0x0000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "2" "WRITE_COMMAND" "2" "2801" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND writing with invalid module selected after valid module
run_libsim "JTAG GO_COMMAND (write) invalid after valid module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001efe0d976d" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
"ERROR: JTAG WRITE_COMMAND with no module selected." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
"ERROR: JTAG GO_COMMAND with no prior WRITE_COMMAND." \
" shifted out: 0x0000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "SELECT_MODULE" "6" "WRITE_COMMAND" "2" \
"2801" "4" "GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND writing with valid module selected after invalid module
run_libsim "JTAG GO_COMMAND (write) valid after invalid module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001efe0d976d" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "6" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" \
"100000" "4" "GO_COMMAND_WRITE" "deadbeef"
# Verify that writing works correctly from both valid modules, WishBone and
# CPU0.
# GO_COMMAND writing for Wishbone (address 0x100000).
run_libsim "JTAG SELECT_MODULE GO_COMMAND (write) WB" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND writing for CPU0 (address 0x2801, MACLO).
run_libsim "JTAG SELECT_MODULE GO_COMMAND (write) CPU0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# Tests of GO_COMMAND_WRITE with different access alignments, boundaries and
# lengths for WishBone. For this we use the loop-report program, which reports
# any changes in values at 0x100000-0x10000f, 0x110000-0x11000f and
# 0x120000-0x12000f or the SPRs MACLO (0x2801) and MACHI (0x2800), all of
# which are initialized to zero.
# First check that a single aligned unit can be written for each access type
# at its allowed alignments.
# GO_COMMAND writing one byte for Wishbone aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) WB 1 byte, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000319cf96400000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000006d6fa6e6f60" \
" shifted out: 0x0164841bc6000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "1" \
"GO_COMMAND_WRITE" "de"
# GO_COMMAND writing one byte for Wishbone aligned at byte 1.
run_libsim "JTAG GO_COMMAND (write) WB 1 byte, aligned byte 1" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001f3f6ce6400010000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000006d6fa6e6f60" \
" shifted out: 0x0164841bc6000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100001 = 0xde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100001" "1" \
"GO_COMMAND_WRITE" "de"
# GO_COMMAND writing one byte for Wishbone aligned at byte 2.
run_libsim "JTAG GO_COMMAND (write) WB 1 byte, aligned byte 2" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000d0a9e2e400008000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000006d6fa6e6f60" \
" shifted out: 0x0164841bc6000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100002 = 0xde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100002" "1" \
"GO_COMMAND_WRITE" "de"
# GO_COMMAND writing one byte for Wishbone aligned at byte 3.
run_libsim "JTAG GO_COMMAND (write) WB 1 byte, aligned byte 3" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000112c3d5e400018000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000006d6fa6e6f60" \
" shifted out: 0x0164841bc6000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100003 = 0xde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100003" "1" \
"GO_COMMAND_WRITE" "de"
# GO_COMMAND writing one half word for Wishbone aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) WB 1 half word, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000fac02ac100000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0164841bc600000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "2" \
"GO_COMMAND_WRITE" "dead"
# GO_COMMAND writing one half word for Wishbone aligned at byte 2.
run_libsim "JTAG GO_COMMAND (write) WB 1 half word, aligned byte 2" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000001bf5314100008000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0164841bc600000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100002 = 0xde" \
"New byte at 0x00100003 = 0xad" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100002" "2" \
"GO_COMMAND_WRITE" "dead"
# GO_COMMAND writing one word for Wishbone aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) WB 1 word, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# Verify that longer writes work OK, at different boundaries. For byte access
# write 9 bytes, for half-word access write 10 bytes and for word access write
# 12 bytes.
# GO_COMMAND writing 9 bytes for Wishbone aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) WB 9 bytes, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000000af2d9ac20000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"New byte at 0x00100007 = 0xbe" \
"New byte at 0x00100008 = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "9" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# GO_COMMAND writing 9 bytes for Wishbone aligned at byte 1.
run_libsim "JTAG GO_COMMAND (write) WB 9 bytes, aligned byte 1" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001c898eeac20010000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100001 = 0xde" \
"New byte at 0x00100002 = 0xad" \
"New byte at 0x00100003 = 0xbe" \
"New byte at 0x00100004 = 0xef" \
"New byte at 0x00100005 = 0xca" \
"New byte at 0x00100006 = 0xfe" \
"New byte at 0x00100007 = 0xba" \
"New byte at 0x00100008 = 0xbe" \
"New byte at 0x00100009 = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100001" "9" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# GO_COMMAND writing 9 bytes for Wishbone aligned at byte 2.
run_libsim "JTAG GO_COMMAND (write) WB 9 bytes, aligned byte 2" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000ebc7c22c20008000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100002 = 0xde" \
"New byte at 0x00100003 = 0xad" \
"New byte at 0x00100004 = 0xbe" \
"New byte at 0x00100005 = 0xef" \
"New byte at 0x00100006 = 0xca" \
"New byte at 0x00100007 = 0xfe" \
"New byte at 0x00100008 = 0xba" \
"New byte at 0x00100009 = 0xbe" \
"New byte at 0x0010000a = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100002" "9" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# GO_COMMAND writing 9 bytes for Wishbone aligned at byte 3.
run_libsim "JTAG GO_COMMAND (write) WB 9 bytes, aligned byte 3" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000129adf52c20018000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100003 = 0xde" \
"New byte at 0x00100004 = 0xad" \
"New byte at 0x00100005 = 0xbe" \
"New byte at 0x00100006 = 0xef" \
"New byte at 0x00100007 = 0xca" \
"New byte at 0x00100008 = 0xfe" \
"New byte at 0x00100009 = 0xba" \
"New byte at 0x0010000a = 0xbe" \
"New byte at 0x0010000b = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100003" "9" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# GO_COMMAND writing 5 half words for Wishbone aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) WB 5 half words, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000c1ae0a0920000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x0000000000185f4b7296abafabafea7eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"New byte at 0x00100007 = 0xbe" \
"New byte at 0x00100008 = 0xba" \
"New byte at 0x00100009 = 0xad" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "a" \
"GO_COMMAND_WRITE" "deadbeefcafebabebaad"
# GO_COMMAND writing 5 half words for Wishbone aligned at byte 2.
run_libsim "JTAG GO_COMMAND (write) WB 5 half words, aligned byte 2" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000209b118920008000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x0000000000185f4b7296abafabafea7eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100002 = 0xde" \
"New byte at 0x00100003 = 0xad" \
"New byte at 0x00100004 = 0xbe" \
"New byte at 0x00100005 = 0xef" \
"New byte at 0x00100006 = 0xca" \
"New byte at 0x00100007 = 0xfe" \
"New byte at 0x00100008 = 0xba" \
"New byte at 0x00100009 = 0xbe" \
"New byte at 0x0010000a = 0xba" \
"New byte at 0x0010000b = 0xad" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100002" "a" \
"GO_COMMAND_WRITE" "deadbeefcafebabebaad"
# GO_COMMAND writing 3 words for Wishbone aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) WB 3 words, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001b42db63fa0000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014adb55b7601f6abafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"New byte at 0x00100007 = 0xbe" \
"New byte at 0x00100008 = 0xba" \
"New byte at 0x00100009 = 0xad" \
"New byte at 0x0010000a = 0xf0" \
"New byte at 0x0010000b = 0x0d" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "c" \
"GO_COMMAND_WRITE" "deadbeefcafebabebaadf00d"
# Test of access for CPU0. Much simpler, since access type, alignment and
# length are more prescribed. Make use of loop-report, which monitors MACLO
# (0x2801) and MACHI (0x2802). These are 32 bit values and presented in target
# endianess (which is big-endian for the OpenRISC, so the MS byte is as the
# highest address.
# GO_COMMAND writing 1 word for CPU0 aligned at byte 0.
run_libsim "JTAG GO_COMMAND (write) CPU0 1 word, aligned byte 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"New MACLO 0xefbeadde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# Check address advances after GO (1 per word for CPU, 4 per word for
# WB). Test WB with writing and reading all sizes and lengths 1 through
# 0x10000. Test CPU0 with writing and reading words with a range of lengths,
# all of which should return length 4.
# - for WB byte access try lengths 1, 2, 3, 4, 5, 8 and 9
# - for WB half word access try lengths 2, 4, 6, 8 and 10
# - for WB full word access try lengths 4, 8 and 12
# - for SPR try length 4
# Advance address after writing 1 byte for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 1 byte address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000319cf96400000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000006d6fa6e6f60" \
" shifted out: 0x0164841bc6000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x0e460cbc200001000010000000000000" \
" access_type: 0x0" \
" address: 0x100001" \
" length: 0x1" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "1" \
"GO_COMMAND_WRITE" "de" "READ_COMMAND"
# Advance address after writing 2 bytes for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 2 bytes address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001eaedff2500000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0164841bc600000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x0ebe2296e10000800010000000000000" \
" access_type: 0x0" \
" address: 0x100002" \
" length: 0x2" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "2" \
"GO_COMMAND_WRITE" "dead" "READ_COMMAND"
# Advance address after writing 3 bytes for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 3 bytes address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000dc247a4480000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001599d9120fb6af60" \
" shifted out: 0x0164841bc60000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x0e4a8124808001800010000000000000" \
" access_type: 0x0" \
" address: 0x100003" \
" length: 0x3" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "3" \
"GO_COMMAND_WRITE" "deadbe" "READ_COMMAND"
# Advance address after writing 4 bytes for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 4 bytes address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000107557c0580000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x0ec23583818000400010000000000000" \
" access_type: 0x0" \
" address: 0x100004" \
" length: 0x4" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "4" \
"GO_COMMAND_WRITE" "deadbeef" "READ_COMMAND"
# Advance address after writing 5 bytes for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 5 bytes address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000004740b8f440000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000009ac236c4a7eefb6af60" \
" shifted out: 0x0164841bc600000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x13f75a14604001400010000000000000" \
" access_type: 0x0" \
" address: 0x100005" \
" length: 0x5" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "5" \
"GO_COMMAND_WRITE" "deadbeefca" "READ_COMMAND"
# Advance address after writing 8 bytes for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 8 bytes address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000171893d95c0000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014db90944fabafea7eefb6af60" \
" shifted out: 0x0164841bc600000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x134b2e6d21c000200010000000000000" \
" access_type: 0x0" \
" address: 0x100008" \
" length: 0x8" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabe" "READ_COMMAND"
# Advance address after writing 9 bytes for WishBone (access type 0)
run_libsim "JTAG GO_COMMAND (write) WB write 9 bytes address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000000af2d9ac20000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x009ea7e8002001200010000000000000" \
" access_type: 0x0" \
" address: 0x100009" \
" length: 0x9" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "9" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba" "READ_COMMAND"
# Advance address after writing 1 half word (2 bytes) for WishBone (access
# type 1)
run_libsim "JTAG GO_COMMAND (write) WB write 1 half word address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000fac02ac100000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0164841bc600000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x08c3cb5a010000800010010000000000" \
" access_type: 0x1" \
" address: 0x100002" \
" length: 0x2" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "2" \
"GO_COMMAND_WRITE" "dead" "READ_COMMAND"
# Advance address after writing 2 half words (4 bytes) for WishBone (access
# type 1)
run_libsim "JTAG GO_COMMAND (write) WB write 2 half words address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000001778a9e180000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x08bfdc4f618000400010010000000000" \
" access_type: 0x1" \
" address: 0x100004" \
" length: 0x4" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "4" \
"GO_COMMAND_WRITE" "deadbeef" "READ_COMMAND"
# Advance address after writing 3 half words (6 bytes) for WishBone (access
# type 1)
run_libsim "JTAG GO_COMMAND (write) WB write 3 half words address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000008c1c6b5140000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000c6961b84fea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x15729df2414000c00010010000000000" \
" access_type: 0x1" \
" address: 0x100006" \
" length: 0x6" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "6" \
"GO_COMMAND_WRITE" "deadbeefcafe" "READ_COMMAND"
# Advance address after writing 4 half words (8 bytes) for WishBone (access
# type 1)
run_libsim "JTAG GO_COMMAND (write) WB write 4 half words address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000061a4e871c0000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014db90944fabafea7eefb6af60" \
" shifted out: 0x0164841bc600000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x1536c7a1c1c000200010010000000000" \
" access_type: 0x1" \
" address: 0x100008" \
" length: 0x8" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabe" "READ_COMMAND"
# Advance address after writing 5 half words (10 bytes) for WishBone (access
# type 1)
run_libsim "JTAG GO_COMMAND (write) WB write 5 half words address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000c1ae0a0920000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x0000000000185f4b7296abafabafea7eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x061b600e212000a00010010000000000" \
" access_type: 0x1" \
" address: 0x10000a" \
" length: 0xa" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "a" \
"GO_COMMAND_WRITE" "deadbeefcafebabebaad" "READ_COMMAND"
# Advance address after writing 1 word (4 bytes) for WishBone (access type 2)
run_libsim "JTAG GO_COMMAND (write) WB write 1 word address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x104bd101e18000400010008000000000" \
" access_type: 0x2" \
" address: 0x100004" \
" length: 0x4" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4" \
"GO_COMMAND_WRITE" "deadbeef" "READ_COMMAND"
# Advance address after writing 2 words (8 bytes) for WishBone (access type 2)
run_libsim "JTAG GO_COMMAND (write) WB write 2 words address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001f99fd767c0000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014db90944fabafea7eefb6af60" \
" shifted out: 0x0164841bc600000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x0dc2caef41c000200010008000000000" \
" access_type: 0x2" \
" address: 0x100008" \
" length: 0x8" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabe" "READ_COMMAND"
# Advance address after writing 3 words (12 bytes) for WishBone (access type
# 2)
run_libsim "JTAG GO_COMMAND (write) WB write 3 words address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001b42db63fa0000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014adb55b7601f6abafabafea7eefb6af60" \
" shifted out: 0x0164841bc60000000000000000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x1e937a55c1a000600010008000000000" \
" access_type: 0x2" \
" address: 0x10000c" \
" length: 0xc" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "c" \
"GO_COMMAND_WRITE" "deadbeefcafebabebaadf00d" "READ_COMMAND"
# Advance address after writing 1 word for CPU0 (access type 2). The address
# should advance by 1 (word, since SPRs are word addressed).
run_libsim "JTAG GO_COMMAND (write) CPU0 write 1 word address advance" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0164841bc6000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing READ_COMMAND." \
" shifting in: 0x00000000000000000000000b2420de30" \
" shifted out: 0x0f059be9218000802800008000000000" \
" access_type: 0x2" \
" address: 0x2802" \
" length: 0x4" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4" \
"GO_COMMAND_WRITE" "deadbeef" "READ_COMMAND"
# Tests of overrun and underrun. For Wishbone check both on different access
# sizes.
# GO_COMMAND_WRITE for WishBone underrun for byte access
run_libsim "JTAG GO_COMMAND (write) WB byte access underrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000171893d95c0000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000c1a78bb0bafea7eefb6af60" \
" shifted out: 0x015fea3b0e200000000000000000000000" \
" status: 0x8" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafeba"
# GO_COMMAND_WRITE for WishBone overrun for byte access
run_libsim "JTAG GO_COMMAND (write) WB byte access overrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000171893d95c0000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x015fea3b0e2000000000000000000000000000" \
" status: 0x8" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"New byte at 0x00100007 = 0xbe" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# GO_COMMAND_WRITE for WishBone underrun for half word access
run_libsim "JTAG GO_COMMAND (write) WB half word access underrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000061a4e871c0000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000c1a78bb0bafea7eefb6af60" \
" shifted out: 0x015fea3b0e200000000000000000000000" \
" status: 0x8" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafeba"
# GO_COMMAND_WRITE for WishBone overrun for half word access
run_libsim "JTAG GO_COMMAND (write) WB half word access overrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000061a4e871c0000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x015fea3b0e2000000000000000000000000000" \
" status: 0x8" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"New byte at 0x00100007 = 0xbe" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# GO_COMMAND_WRITE for WishBone underrun for word access
run_libsim "JTAG GO_COMMAND (write) WB word access underrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001f99fd767c0000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000c1a78bb0bafea7eefb6af60" \
" shifted out: 0x015fea3b0e200000000000000000000000" \
" status: 0x8" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafeba"
# GO_COMMAND_WRITE for WishBone overrun for word access
run_libsim "JTAG GO_COMMAND (write) WB word access overrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001f99fd767c0000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000005b486612bafabafea7eefb6af60" \
" shifted out: 0x015fea3b0e2000000000000000000000000000" \
" status: 0x8" \
" time taken:" \
"New byte at 0x00100000 = 0xde" \
"New byte at 0x00100001 = 0xad" \
"New byte at 0x00100002 = 0xbe" \
"New byte at 0x00100003 = 0xef" \
"New byte at 0x00100004 = 0xca" \
"New byte at 0x00100005 = 0xfe" \
"New byte at 0x00100006 = 0xba" \
"New byte at 0x00100007 = 0xbe" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabeba"
# CPU0 underrun and overrun tests should remember that this is a 32-bit access
# with a big-endian organization.
# GO_COMMAND_WRITE for CPU0 underrun for word access
run_libsim "JTAG GO_COMMAND (write) CPU0 word access underrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001599d9120fb6af60" \
" shifted out: 0x015fea3b0e2000000000000000" \
" status: 0x8" \
" time taken:" \
"New MACLO 0x00beadde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4" \
"GO_COMMAND_WRITE" "deadbe"
# GO_COMMAND_WRITE for CPU0 overrun for word access
run_libsim "JTAG GO_COMMAND (write) CPU0 word access overrun" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000009ac236c4a7eefb6af60" \
" shifted out: 0x015fea3b0e20000000000000000000" \
" status: 0x8" \
" time taken:" \
"New MACLO 0xefbeadde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4" \
"GO_COMMAND_WRITE" "deadbeefca"
# Test access to invalid areas. We can only do this for Wishbone, since all
# SPRs are validly accessible (non-writeable ones just return undefined
# results).
# Test each access type with one unit and test blocks spanning start and end
# of writeable blocks.
# GO_COMMAND_WRITE for 1 byte write to invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 1 byte invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001ba7d236600000000080008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000006d6fa6e6f60" \
" shifted out: 0x0112585a56400000000000" \
" status: 0x4" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "200000" "1" \
"GO_COMMAND_WRITE" "de"
# GO_COMMAND_WRITE for 2 byte write ending in invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 2 byte ending invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001bbbf3ba70001fffff00008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0112585a5640000000000000" \
" status: 0x4" \
" time taken:" \
"New byte at 0x001fffff = 0xde" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "1fffff" "2" \
"GO_COMMAND_WRITE" "dead"
# GO_COMMAND_WRITE for 2 byte write starting in invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 2 byte starting invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000fd76999f0001fffff7fe08" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0112585a5640000000000000" \
" status: 0x4" \
" time taken:" \
"New byte at 0xffe00000 = 0xad" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "ffdfffff" "2" \
"GO_COMMAND_WRITE" "dead"
# GO_COMMAND_WRITE for 1 half word write to invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 1 half word invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000017121f0c300000000080108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000000e463a0ad6af60" \
" shifted out: 0x0112585a5640000000000000" \
" status: 0x4" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "200000" "2" \
"GO_COMMAND_WRITE" "dead"
# GO_COMMAND_WRITE for 2 half word write ending in invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 2 half word ending invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000184405a638000fffff00108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0112585a56400000000000000000" \
" status: 0x4" \
" time taken:" \
"New byte at 0x001ffffe = 0xde" \
"New byte at 0x001fffff = 0xad" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "1ffffe" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND_WRITE for 2 half word write starting in invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 2 half word starting invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000c289f85b8000fffff7ff08" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0112585a56400000000000000000" \
" status: 0x4" \
" time taken:" \
"New byte at 0xffe00000 = 0xbe" \
"New byte at 0xffe00001 = 0xef" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "ffdffffe" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND_WRITE for 1 word write to invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 1 word invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000004a24cf580000000080088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x00000000001a6f47467eefb6af60" \
" shifted out: 0x0112585a56400000000000000000" \
" status: 0x4" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "200000" "4" \
"GO_COMMAND_WRITE" "deadbeef"
# GO_COMMAND_WRITE for 2 word write ending in invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 2 word ending invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000008b923f65c0007ffff00088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014db90944fabafea7eefb6af60" \
" shifted out: 0x0112585a5640000000000000000000000000" \
" status: 0x4" \
" time taken:" \
"New byte at 0x001ffffc = 0xde" \
"New byte at 0x001ffffd = 0xad" \
"New byte at 0x001ffffe = 0xbe" \
"New byte at 0x001fffff = 0xef" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "1ffffc" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabe"
# GO_COMMAND_WRITE for 2 word write starting in invalid memory.
run_libsim "JTAG GO_COMMAND (write) WB 2 word starting invalid write" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001cd5b9d5dc0007ffff7fe88" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing GO_COMMAND_WRITE." \
" shifting in: 0x000000000014db90944fabafea7eefb6af60" \
" shifted out: 0x0112585a5640000000000000000000000000" \
" status: 0x4" \
" time taken:" \
"New byte at 0xffe00000 = 0xca" \
"New byte at 0xffe00001 = 0xfe" \
"New byte at 0xffe00002 = 0xba" \
"New byte at 0xffe00003 = 0xbe" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-report" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "ffdffffc" "8" \
"GO_COMMAND_WRITE" "deadbeefcafebabe"
Go to most recent revision | Compare with Previous | Blame | View Log