URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [or1ksim/] [or1ksim-0.4.0rc2/] [ltmain.sh] - Rev 592
Go to most recent revision | Compare with Previous | Blame | View Log
# Generated from ltmain.m4sh. # ltmain.sh (GNU libtool) 2.2.6b # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print informational messages (default) # --version print version information # -h, --help print short or long help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to <bug-libtool@gnu.org>. PROGRAM=ltmain.sh PACKAGE=libtool VERSION="2.2.6b Debian-2.2.6b-2ubuntu1" TIMESTAMP="" package_revision=1.3017 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # NLS nuisances: We save the old values to restore during execute mode. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done $lt_unset CDPATH : ${CP="cp -f"} : ${ECHO="echo"} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SED="/bin/sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } # Generated shell functions inserted here. # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" # The name of this program: # In the unlikely event $progname began with a '-', it would play havoc with # func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result case $progname in -*) progname=./$progname ;; esac # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=: for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname${mode+: }$mode: $*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` done my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "X$my_tmpdir" | $Xsed } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "X$1" | $Xsed \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_version # Echo version message to standard output and exit. func_version () { $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $SED -n '/^# Usage:/,/# -h/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" $ECHO $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help # Echo long help message to standard output and exit. func_help () { $SED -n '/^# Usage:/,/# Report bugs to/ { s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p }' < "$progpath" exit $? } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { func_error "missing argument for $1" exit_cmd=exit } exit_cmd=: # Check that we have a working $ECHO. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then # Yippee, $ECHO works! : else # Restart under the correct shell, and then maybe $ECHO will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <<EOF $* EOF exit $EXIT_SUCCESS fi magic="%%%MAGIC variable%%%" magic_exe="%%%MAGIC EXE variable%%%" # Global variables. # $mode is unset nonopt= execute_dlfiles= preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 opt_dry_run=false opt_duplicate_deps=false opt_silent=false opt_debug=: # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { func_error ${1+"$@"} func_error "See the $PACKAGE documentation for more information." func_fatal_error "Fatal configuration error." } # func_config # Display the configuration for all the tags in this script. func_config () { re_begincf='^# ### BEGIN LIBTOOL' re_endcf='^# ### END LIBTOOL' # Default configuration. $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" # Now print the configurations for the tags. for tagname in $taglist; do $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done exit $? } # func_features # Display the features supported by this script. func_features () { $ECHO "host: $host" if test "$build_libtool_libs" = yes; then $ECHO "enable shared libraries" else $ECHO "disable shared libraries" fi if test "$build_old_libs" = yes; then $ECHO "enable static libraries" else $ECHO "disable static libraries" fi exit $? } # func_enable_tag tagname # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { # Global variable: tagname="$1" re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" sed_extractcf="/$re_begincf/,/$re_endcf/p" # Validate tagname. case $tagname in *[!-_A-Za-z0-9,/]*) func_fatal_error "invalid tag name: $tagname" ;; esac # Don't test for the "default" C tag, as we know it's # there but not specially marked. case $tagname in CC) ;; *) if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # Parse options once, thoroughly. This comes as soon as possible in # the script to make things like `libtool --version' happen quickly. { # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Parse non-mode specific arguments: while test "$#" -gt 0; do opt="$1" shift case $opt in --config) func_config ;; --debug) preserve_args="$preserve_args $opt" func_echo "enabling shell trace mode" opt_debug='set -x' $opt_debug ;; -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break execute_dlfiles="$execute_dlfiles $1" shift ;; --dry-run | -n) opt_dry_run=: ;; --features) func_features ;; --finish) mode="finish" ;; --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break case $1 in # Valid mode arguments: clean) ;; compile) ;; execute) ;; finish) ;; install) ;; link) ;; relink) ;; uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac mode="$1" shift ;; --preserve-dup-deps) opt_duplicate_deps=: ;; --quiet|--silent) preserve_args="$preserve_args $opt" opt_silent=: ;; --verbose| -v) preserve_args="$preserve_args $opt" opt_silent=false ;; --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break preserve_args="$preserve_args $opt $1" func_enable_tag "$1" # tagname is set here shift ;; # Separate optargs to long options: -dlopen=*|--mode=*|--tag=*) func_opt_split "$opt" set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} shift ;; -\?|-h) func_usage ;; --help) opt_help=: ;; --version) func_version ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) nonopt="$opt" break ;; esac done case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ;; esac # Having warned about all mis-specified options, bail out if # anything was wrong. $exit_cmd $EXIT_FAILURE } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } ## ----------- ## ## Main. ## ## ----------- ## $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi test -z "$mode" && func_fatal_error "error: you must specify a MODE." # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$mode' for more information." } # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_ltwrapper_scriptname_result="" if func_ltwrapper_executable_p "$1"; then func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" fi } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_quote_for_eval "$arg" CC_quoted="$CC_quoted $func_quote_for_eval_result" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_quote_for_eval "$arg" CC_quoted="$CC_quoted $func_quote_for_eval_result" done case "$@ " in " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T <<EOF # $write_libobj - a libtool object file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # Name of the PIC object. pic_object=$write_lobj # Name of the non-PIC object non_pic_object=$write_oldobj EOF $MV "${write_libobj}T" "${write_libobj}" } } # func_mode_compile arg... func_mode_compile () { $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= pie_flag= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) test -n "$libobj" && \ func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; -pie | -fpie | -fPIE) pie_flag="$pie_flag $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) later="$later $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" func_quote_for_eval "$arg" lastarg="$lastarg $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. func_quote_for_eval "$lastarg" base_compile="$base_compile $func_quote_for_eval_result" done # for arg case $arg_mode in arg) func_fatal_error "you must specify an argument for -Xcompile" ;; target) func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" libobj="$func_basename_result" } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo case $libobj in *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ *.[fF][09]? | *.for | *.java | *.obj | *.sx) func_xform "$libobj" libobj=$func_xform_result ;; esac case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no continue ;; -static) build_libtool_libs=no build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi removelist="$removelist $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist removelist="$removelist $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir command="$command -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$mode'" ;; esac $ECHO $ECHO "Try \`$progname --help' for more information about other modes." exit $? } # Now that we've collected a possible --mode arg, show help if necessary $opt_help && func_mode_help # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $execute_dlfiles; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_quote_for_eval "$file" args="$args $func_quote_for_eval_result" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" $ECHO "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS $ECHO "X----------------------------------------------------------------------" | $Xsed $ECHO "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done $ECHO $ECHO "If you ever happen to want to link against installed libraries" $ECHO "in a given directory, LIBDIR, you must either use libtool, and" $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" $ECHO "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" $ECHO " during execution" fi if test -n "$runpath_var"; then $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" $ECHO " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi $ECHO $ECHO "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" $ECHO "pages." ;; *) $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS } test "$mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $ECHO "X$nonopt" | $GREP shtool >/dev/null; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" install_prog="$install_prog$func_quote_for_eval_result" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) case " $install_prog " in *[\\\ /]cp\ *) ;; *) prev=$arg ;; esac ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" install_prog="$install_prog $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for progfile in $progfiles; do func_verbose "extracting global C symbols from \`$progfile'" $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" } done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 </dev/null >/dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" fi $ECHO >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; " case $host in *cygwin* | *mingw* | *cegcc* ) $ECHO >> "$output_objdir/$my_dlsyms" "\ /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */" lt_dlsym_const= ;; *osf5*) echo >> "$output_objdir/$my_dlsyms" "\ /* This system does not cope well with relocations in const data */" lt_dlsym_const= ;; *) lt_dlsym_const=const ;; esac $ECHO >> "$output_objdir/$my_dlsyms" "\ extern $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac $ECHO >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) symtab_cflags="$symtab_cflags $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper_part1 [arg=no] # # Emit the first part of a libtool wrapper script on stdout. # For more information, see the description associated with # func_emit_wrapper(), below. func_emit_wrapper_part1 () { func_emit_wrapper_part1_arg1=no if test -n "$1" ; then func_emit_wrapper_part1_arg1=$1 fi $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then ECHO=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then # Yippee, \$ECHO works! : else # Restart under the correct shell, and then maybe \$ECHO will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $ECHO "\ # Find the directory that this script lives in. thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done " } # end: func_emit_wrapper_part1 # func_emit_wrapper_part2 [arg=no] # # Emit the second part of a libtool wrapper script on stdout. # For more information, see the description associated with # func_emit_wrapper(), below. func_emit_wrapper_part2 () { func_emit_wrapper_part2_arg1=no if test -n "$1" ; then func_emit_wrapper_part2_arg1=$1 fi $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # end: func_emit_wrapper_part2 # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=no if test -n "$1" ; then func_emit_wrapper_arg1=$1 fi # split this up so that func_emit_cwrapperexe_src # can call each part independently. func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" } # func_to_host_path arg # # Convert paths to host format when used with build tools. # Intended for use with "native" mingw (where libtool itself # is running under the msys shell), or in the following cross- # build environments: # $build $host # mingw (msys) mingw [e.g. native] # cygwin mingw # *nix + wine mingw # where wine is equipped with the `winepath' executable. # In the native mingw case, the (msys) shell automatically # converts paths for any non-msys applications it launches, # but that facility isn't available from inside the cwrapper. # Similar accommodations are necessary for $host mingw and # $build cygwin. Calling this function does no harm for other # $host/$build combinations not listed above. # # ARG is the path (on $build) that should be converted to # the proper representation for $host. The result is stored # in $func_to_host_path_result. func_to_host_path () { func_to_host_path_result="$1" if test -n "$1" ; then case $host in *mingw* ) lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' case $build in *mingw* ) # actually, msys # awkward: cmd appends spaces to result lt_sed_strip_trailing_spaces="s/[ ]*\$//" func_to_host_path_tmp1=`( cmd //c echo "$1" |\ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` ;; *cygwin* ) func_to_host_path_tmp1=`cygpath -w "$1"` func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` ;; * ) # Unfortunately, winepath does not exit with a non-zero # error code, so we are forced to check the contents of # stdout. On the other hand, if the command is not # found, the shell will set an exit code of 127 and print # *an error message* to stdout. So we must check for both # error code of zero AND non-empty stdout, which explains # the odd construction: func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` else # Allow warning below. func_to_host_path_result="" fi ;; esac if test -z "$func_to_host_path_result" ; then func_error "Could not determine host path corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_path_result="$1" fi ;; esac fi } # end: func_to_host_path # func_to_host_pathlist arg # # Convert pathlists to host format when used with build tools. # See func_to_host_path(), above. This function supports the # following $build/$host combinations (but does no harm for # combinations not listed here): # $build $host # mingw (msys) mingw [e.g. native] # cygwin mingw # *nix + wine mingw # # Path separators are also converted from $build format to # $host format. If ARG begins or ends with a path separator # character, it is preserved (but converted to $host format) # on output. # # ARG is a pathlist (on $build) that should be converted to # the proper representation on $host. The result is stored # in $func_to_host_pathlist_result. func_to_host_pathlist () { func_to_host_pathlist_result="$1" if test -n "$1" ; then case $host in *mingw* ) lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_to_host_pathlist_tmp2="$1" # Once set for this call, this variable should not be # reassigned. It is used in tha fallback case. func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e 's|^:*||' -e 's|:*$||'` case $build in *mingw* ) # Actually, msys. # Awkward: cmd appends spaces to result. lt_sed_strip_trailing_spaces="s/[ ]*\$//" func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e "$lt_sed_naive_backslashify"` ;; *cygwin* ) func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e "$lt_sed_naive_backslashify"` ;; * ) # unfortunately, winepath doesn't convert pathlists func_to_host_pathlist_result="" func_to_host_pathlist_oldIFS=$IFS IFS=: for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do IFS=$func_to_host_pathlist_oldIFS if test -n "$func_to_host_pathlist_f" ; then func_to_host_path "$func_to_host_pathlist_f" if test -n "$func_to_host_path_result" ; then if test -z "$func_to_host_pathlist_result" ; then func_to_host_pathlist_result="$func_to_host_path_result" else func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" fi fi fi IFS=: done IFS=$func_to_host_pathlist_oldIFS ;; esac if test -z "$func_to_host_pathlist_result" ; then func_error "Could not determine the host path(s) corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This may break if $1 contains DOS-style drive # specifications. The fix is not to complicate the expression # below, but for the user to provide a working wine installation # with winepath so that path translation in the cross-to-mingw # case works properly. lt_replace_pathsep_nix_to_dos="s|:|;|g" func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ $SED -e "$lt_replace_pathsep_nix_to_dos"` fi # Now, add the leading and trailing path separators back case "$1" in :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" ;; esac case "$1" in *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" ;; esac ;; esac fi } # end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat <<EOF /* $cwrappersource - temporary wrapper executable for $objdir/$outputname Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION The $output program cannot be directly executed until all the libtool libraries that it depends on are installed. This wrapper executable should never be moved out of the build directory. If it is, it will not operate correctly. Currently, it simply execs the wrapper *script* "$SHELL $output", but could eventually absorb all of the scripts functionality and exec $objdir/$outputname directly. */ EOF cat <<"EOF" #include <stdio.h> #include <stdlib.h> #ifdef _MSC_VER # include <direct.h> # include <process.h> # include <io.h> # define setmode _setmode #else # include <unistd.h> # include <stdint.h> # ifdef __CYGWIN__ # include <io.h> # define HAVE_SETENV # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif # endif #endif #include <malloc.h> #include <stdarg.h> #include <assert.h> #include <string.h> #include <ctype.h> #include <errno.h> #include <fcntl.h> #include <sys/stat.h> #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif #ifdef _MSC_VER # define S_IXUSR _S_IEXEC # define stat _stat # ifndef _INTPTR_T_DEFINED # define intptr_t int # endif #endif #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifdef __CYGWIN__ # define FOPEN_WB "wb" #endif #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #undef LTWRAPPER_DEBUGPRINTF #if defined DEBUGWRAPPER # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args static void ltwrapper_debugprintf (const char *fmt, ...) { va_list args; va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } #else # define LTWRAPPER_DEBUGPRINTF(args) #endif const char *program_name = NULL; void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_fatal (const char *message, ...); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_opt_process_env_set (const char *arg); void lt_opt_process_env_prepend (const char *arg); void lt_opt_process_env_append (const char *arg); int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); static const char *script_text_part1 = EOF func_emit_wrapper_part1 yes | $SED -e 's/\([\\"]\)/\\\1/g' \ -e 's/^/ "/' -e 's/$/\\n"/' echo ";" cat <<EOF static const char *script_text_part2 = EOF func_emit_wrapper_part2 yes | $SED -e 's/\([\\"]\)/\\\1/g' \ -e 's/^/ "/' -e 's/$/\\n"/' echo ";" cat <<EOF const char * MAGIC_EXE = "$magic_exe"; const char * LIB_PATH_VARNAME = "$shlibpath_var"; EOF if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then func_to_host_pathlist "$temp_rpath" cat <<EOF const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; EOF else cat <<"EOF" const char * LIB_PATH_VALUE = ""; EOF fi if test -n "$dllsearchpath"; then func_to_host_pathlist "$dllsearchpath:" cat <<EOF const char * EXE_PATH_VARNAME = "PATH"; const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; EOF else cat <<"EOF" const char * EXE_PATH_VARNAME = ""; const char * EXE_PATH_VALUE = ""; EOF fi if test "$fast_install" = yes; then cat <<EOF const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ EOF else cat <<EOF const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ EOF fi cat <<"EOF" #define LTWRAPPER_OPTION_PREFIX "--lt-" #define LTWRAPPER_OPTION_PREFIX_LENGTH 5 static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; /* argument is putenv-style "foo=bar", value of foo is set to bar */ static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ int main (int argc, char *argv[]) { char **newargz; int newargc; char *tmp_pathspec; char *actual_cwrapper_path; char *actual_cwrapper_name; char *target_name; char *lt_argv_zero; intptr_t rval = 127; int i; program_name = (char *) xstrdup (base_name (argv[0])); LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); /* very simple arg parsing; don't want to rely on getopt */ for (i = 1; i < argc; i++) { if (strcmp (argv[i], dumpscript_opt) == 0) { EOF case "$host" in *mingw* | *cygwin* ) # make stdout use "unix" line endings echo " setmode(1,_O_BINARY);" ;; esac cat <<"EOF" printf ("%s", script_text_part1); printf ("%s", script_text_part2); return 0; } } newargz = XMALLOC (char *, argc + 1); tmp_pathspec = find_executable (argv[0]); if (tmp_pathspec == NULL) lt_fatal ("Couldn't find %s", argv[0]); LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", tmp_pathspec)); actual_cwrapper_path = chase_symlinks (tmp_pathspec); LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", actual_cwrapper_path)); XFREE (tmp_pathspec); actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); strendzap (actual_cwrapper_path, actual_cwrapper_name); /* wrapper name transforms */ strendzap (actual_cwrapper_name, ".exe"); tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); XFREE (actual_cwrapper_name); actual_cwrapper_name = tmp_pathspec; tmp_pathspec = 0; /* target_name transforms -- use actual target program name; might have lt- prefix */ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); strendzap (target_name, ".exe"); tmp_pathspec = lt_extend_str (target_name, ".exe", 1); XFREE (target_name); target_name = tmp_pathspec; tmp_pathspec = 0; LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", target_name)); EOF cat <<EOF newargz[0] = XMALLOC (char, (strlen (actual_cwrapper_path) + strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); strcpy (newargz[0], actual_cwrapper_path); strcat (newargz[0], "$objdir"); strcat (newargz[0], "/"); EOF cat <<"EOF" /* stop here, and copy so we don't have to do this twice */ tmp_pathspec = xstrdup (newargz[0]); /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ strcat (newargz[0], actual_cwrapper_name); /* DO want the lt- prefix here if it exists, so use target_name */ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); XFREE (tmp_pathspec); tmp_pathspec = NULL; EOF case $host_os in mingw*) cat <<"EOF" { char* p; while ((p = strchr (newargz[0], '\\')) != NULL) { *p = '/'; } while ((p = strchr (lt_argv_zero, '\\')) != NULL) { *p = '/'; } } EOF ;; esac cat <<"EOF" XFREE (target_name); XFREE (actual_cwrapper_path); XFREE (actual_cwrapper_name); lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ lt_setenv ("DUALCASE", "1"); /* for MSK sh */ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); newargc=0; for (i = 1; i < argc; i++) { if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) { if (argv[i][env_set_opt_len] == '=') { const char *p = argv[i] + env_set_opt_len + 1; lt_opt_process_env_set (p); } else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) { lt_opt_process_env_set (argv[++i]); /* don't copy */ } else lt_fatal ("%s missing required argument", env_set_opt); continue; } if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) { if (argv[i][env_prepend_opt_len] == '=') { const char *p = argv[i] + env_prepend_opt_len + 1; lt_opt_process_env_prepend (p); } else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) { lt_opt_process_env_prepend (argv[++i]); /* don't copy */ } else lt_fatal ("%s missing required argument", env_prepend_opt); continue; } if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) { if (argv[i][env_append_opt_len] == '=') { const char *p = argv[i] + env_append_opt_len + 1; lt_opt_process_env_append (p); } else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) { lt_opt_process_env_append (argv[++i]); /* don't copy */ } else lt_fatal ("%s missing required argument", env_append_opt); continue; } if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) { /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX namespace, but it is not one of the ones we know about and have already dealt with, above (inluding dump-script), then report an error. Otherwise, targets might begin to believe they are allowed to use options in the LTWRAPPER_OPTION_PREFIX namespace. The first time any user complains about this, we'll need to make LTWRAPPER_OPTION_PREFIX a configure-time option or a configure.ac-settable value. */ lt_fatal ("Unrecognized option in %s namespace: '%s'", ltwrapper_option_prefix, argv[i]); } /* otherwise ... */ newargz[++newargc] = xstrdup (argv[i]); } newargz[++newargc] = NULL; LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); for (i = 0; i < newargc; i++) { LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); } EOF case $host_os in mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); if (rval == -1) { /* failed to start process */ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); return 127; } return rval; EOF ;; *) cat <<"EOF" execv (lt_argv_zero, newargz); return rval; /* =127, but avoids unused variable warning */ EOF ;; esac cat <<"EOF" } void * xmalloc (size_t num) { void *p = (void *) malloc (num); if (!p) lt_fatal ("Memory exhausted"); return p; } char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL; } const char * base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ if (isalpha ((unsigned char) name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; return base; } int check_executable (const char *path) { struct stat st; LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; if ((stat (path, &st) >= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", tmp_pathspec)); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { char *errstr = strerror (errno); lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal ("Could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } static void lt_error_core (int exit_status, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } void lt_setenv (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", (name ? name : "<NULL>"), (value ? value : "<NULL>"))); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } int lt_split_name_value (const char *arg, char** name, char** value) { const char *p; int len; if (!arg || !*arg) return 1; p = strchr (arg, (int)'='); if (!p) return 1; *value = xstrdup (++p); len = strlen (arg) - strlen (*value); *name = XMALLOC (char, len); strncpy (*name, arg, len-1); (*name)[len - 1] = '\0'; return 0; } void lt_opt_process_env_set (const char *arg) { char *name = NULL; char *value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); } lt_setenv (name, value); XFREE (name); XFREE (value); } void lt_opt_process_env_prepend (const char *arg) { char *name = NULL; char *value = NULL; char *new_value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); } new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); XFREE (name); XFREE (value); } void lt_opt_process_env_append (const char *arg) { char *name = NULL; char *value = NULL; char *new_value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); } new_value = lt_extend_str (getenv (name), value, 1); lt_setenv (name, new_value); XFREE (new_value); XFREE (name); XFREE (value); } void lt_update_exe_path (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", (name ? name : "<NULL>"), (value ? value : "<NULL>"))); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", (name ? name : "<NULL>"), (value ? value : "<NULL>"))); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF } # end: func_emit_cwrapperexe_src # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) weak_libs="$weak_libs $arg" prev= continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname '-L' '' "$arg" dir=$func_stripname_result if test -z "$dir"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot) compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" arg="$arg $wl$func_quote_for_eval_result" compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" arg="$arg $wl$func_quote_for_eval_result" compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # -64, -mips[0-9] enable 64-bit mode on the SGI compiler # -r[0-9][0-9]* specifies the processor on the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler # +DA*, +DD* enable 64-bit mode on the HP compiler # -q* pass through compiler args for the IBM compiler # -m*, -t[45]*, -txscale* pass through architecture-specific # compiler args for GCC # -F/path gives path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" compiler_flags="$compiler_flags $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_duplicate_deps ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= case $lib in *.la) func_source "$lib" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` case " $weak_libs " in *" $deplib_base "*) ;; *) deplibs="$deplibs $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then $ECHO $ECHO "*** Warning: Trying to link with static lib archive $deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because the file extensions .$libext of this argument makes me believe" $ECHO "*** that it is just a static archive that I should not use here." else $ECHO $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) temp_rpath="$temp_rpath$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded notinst_deplibs="$notinst_deplibs $lib" need_relink=no ;; *) if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then $ECHO if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $ECHO $ECHO "*** And there doesn't seem to be a static archive available" $ECHO "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. $ECHO $ECHO "*** Warning: This system can not link to static lib archive $lib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then $ECHO "*** But as you try to build a module library, libtool will still create " $ECHO "*** a static module, that should work as long as the dlopening application" $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then $ECHO $ECHO "*** However, this would only work if libtool was able to extract symbol" $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" $ECHO "*** not find such a program. So, this module is probably useless." $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_dirname "$deplib" "" "." dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else $ECHO $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" libobjs="$libobjs $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi removelist="$removelist $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c <<EOF int main() { return 0; } EOF $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ldd_output=`ldd conftest` for i in $deplibs; do case $i in -l*) func_stripname -l '' "$i" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) newdeplibs="$newdeplibs $i" i="" ;; esac fi if test -n "$i" ; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then newdeplibs="$newdeplibs $i" else droppeddeps=yes $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which I believe you do not have" $ECHO "*** because a test_compile did reveal that the linker did not use it for" $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." fi fi ;; *) newdeplibs="$newdeplibs $i" ;; esac done else # Error occurred in the first compile. Let's try to salvage # the situation: Compile a separate program for each library. for i in $deplibs; do case $i in -l*) func_stripname -l '' "$i" name=$func_stripname_result $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) newdeplibs="$newdeplibs $i" i="" ;; esac fi if test -n "$i" ; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then newdeplibs="$newdeplibs $i" else droppeddeps=yes $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because a test_compile did reveal that the linker did not use this one" $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes $ECHO $ECHO "*** Warning! Library $i is needed by this library but I was not able to" $ECHO "*** make it link in! You will probably need to install it or some" $ECHO "*** library that it depends on before this library will be fully" $ECHO "*** functional. Installing it before continuing would be even better." fi ;; *) newdeplibs="$newdeplibs $i" ;; esac done fi ;; file_magic*) set dummy $deplibs_check_method; shift file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | $GREP . >/dev/null; then $ECHO if test "X$deplibs_check_method" = "Xnone"; then $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then $ECHO $ECHO "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" $ECHO "*** a static module, that should work as long as the dlopening" $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then $ECHO $ECHO "*** However, this would only work if libtool was able to extract symbol" $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" $ECHO "*** not find such a program. So, this module is probably useless." $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else $ECHO "*** The inter-library dependencies that have been dropped here will be" $ECHO "*** automatically added whenever a program is linked with this library" $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then $ECHO $ECHO "*** Since this library must not contain undefined symbols," $ECHO "*** because either the platform does not support them or" $ECHO "*** it was explicitly requested with -no-undefined," $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do linknames="$linknames $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" delfiles="$delfiles $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" func_len " $cmd" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then func_show_eval "$cmd" 'exit $?' skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" $ECHO 'INPUT (' > $output for obj in $save_libobjs do $ECHO "$obj" >> $output done $ECHO ')' >> $output delfiles="$delfiles $output" elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do $ECHO "$obj" >> $output done delfiles="$delfiles $output" output=$firstobj\"$file_list_spec$output\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=$obj func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi delfiles="$delfiles $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $dlprefiles libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) compile_command="$compile_command ${wl}-bind_at_load" finalize_command="$finalize_command ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *cegcc) # Disable wrappers for cegcc, we are cross compiling anyway. wrappers_required=no ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $ECHO for shipping. if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then oldobjs="$oldobjs $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $addlibs oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $dlprefiles oldobjs="$oldobjs $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else $ECHO "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" newdlfiles="$newdlfiles $libdir/$name" ;; *) newdlfiles="$newdlfiles $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" newdlprefiles="$newdlprefiles $libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$mode" = link || test "$mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) RM="$RM $arg"; rmforce=yes ;; -*) RM="$RM $arg" ;; *) files="$files $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then objdir="$origobjdir" else objdir="$dir/$origobjdir" fi func_basename "$file" name="$func_basename_result" test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" case "$mode" in clean) case " $library_names " in # " " in the beginning catches empty $dlname *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) if test "$mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result rmfiles="$rmfiles $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$mode" = uninstall || test "$mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2
Go to most recent revision | Compare with Previous | Blame | View Log