URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [tags/] [or1ksim/] [or1ksim-0.5.0rc3/] [testsuite/] [libsim.tests/] [jtag-write-command.exp] - Rev 846
Go to most recent revision | Compare with Previous | Blame | View Log
# jtag-command.exp. Tests of the library JTAG WRITE_COMMAND
# Copyright (C) 2010 Embecosm Limited
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
# This file is part of OpenRISC 1000 Architectural Simulator.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http:#www.gnu.org/licenses/>. */
# -----------------------------------------------------------------------------
# This code is commented throughout for use with Doxygen.
# -----------------------------------------------------------------------------
# These are the tests of the high level JTAG WRITE_COMMAND interface.
# NOTE. All these tests return timing information, but we ignore it, since in
# general it will not be repeatable.
# Test of WRITE_COMMAND for each module (including none). This should raise an
# error for any module other than WB and CPU0. There are different errors for
# CPU1 (which can be selected, but for which WRITE_COMMAND is invalid) and all
# other modules.
# WRITE_COMMAND with no module selection
run_libsim "JTAG WRITE_COMMAND no module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken: " \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
# WRITE_COMMAND for Wishbone
run_libsim "JTAG WRITE_COMMAND module WB" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
# WRITE_COMMAND for CPU0
run_libsim "JTAG WRITE_COMMAND module CPU0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4"
# WRITE_COMMAND for CPU1
run_libsim "JTAG WRITE_COMMAND module CPU1" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001993c98e69" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
"ERROR: JTAG WRITE_COMMAND for CPU1 not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "2" "WRITE_COMMAND" "2" "100000" "4"
# WRITE_COMMAND for invalid module
run_libsim "JTAG WRITE_COMMAND invalid module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000424d9ea79" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
"ERROR: JTAG WRITE_COMMAND with no module selected." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "3" "WRITE_COMMAND" "2" "100000" "4"
# WRITE_COMMAND for valid followed by invalid module
run_libsim "JTAG WRITE_COMMAND valid then invalid module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000001993c98e69" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000424d9ea79" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
"ERROR: JTAG WRITE_COMMAND with no module selected." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "2" "SELECT_MODULE" "3" "WRITE_COMMAND" "2" \
"100000" "4"
# WRITE_COMMAND for invalid followed by valid module
run_libsim "JTAG WRITE_COMMAND invalid then valid module" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken: " \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000424d9ea79" \
" shifted out: 0x01893c98e68000000000" \
" status: 0x2" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" "8" \
"SELECT_MODULE" "3" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" \
"100000" "4"
# Tests of WRITE_COMMAND access types for WishBone. Check the different access
# types are accepted/rejected as expected (0, 1, 2, 4, 5 and 6 are OK).
# WRITE_COMMAND to write bytes for WishBone (access type 0)
run_libsim "JTAG WRITE_COMMAND WB write bytes" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000107557c0580000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "4"
# WRITE_COMMAND to write half words for WishBone (access type 1)
run_libsim "JTAG WRITE_COMMAND WB write half words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000001778a9e180000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "4"
# WRITE_COMMAND to write words for WishBone (access type 2)
run_libsim "JTAG WRITE_COMMAND WB write words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
# WRITE_COMMAND to write access type 3 for WishBone. This should fail with an
# error.
run_libsim "JTAG WRITE_COMMAND WB write access type 3" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000009f6e431380000000100188" \
"ERROR: JTAG WRITE_COMMAND unknown access type 3." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "3" "100000" "4"
# WRITE_COMMAND to read bytes for WishBone (access type 4). All the read
# accesses use the init version of the loop, so consistent values are set.
run_libsim "JTAG WRITE_COMMAND WB read bytes" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000982f0f3d80000000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "4"
# WRITE_COMMAND to read half words for WishBone (access type 5)
run_libsim "JTAG WRITE_COMMAND WB read half words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018802dad980000000100148" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "4"
# WRITE_COMMAND to read words for WishBone (access type 6)
run_libsim "JTAG WRITE_COMMAND WB read words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000001039e5cf800000001000c8" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4"
# WRITE_COMMAND to read access type 7 for WishBone. This should fail with an
# error.
run_libsim "JTAG WRITE_COMMAND WB read access type 7" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000010014302b800000001001c8" \
"ERROR: JTAG WRITE_COMMAND unknown access type 7." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "7" "100000" "4"
# Tests of WRITE_COMMAND addresses for WishBone. Check different addresses are
# all accepted. For all of these we use the simple loop and a byte write. Test
# the boundaries (address 0 and address 0xffffffff).
# WRITE_COMMAND for WishBone to address 0
run_libsim "JTAG WRITE_COMMAND WB write address 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000517c6ee600000000000008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "0" "1"
# WRITE_COMMAND for WishBone to address ffffffff
run_libsim "JTAG WRITE_COMMAND WB write address 0xffffffff" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000cd06d25e0001fffffffe08" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "ffffffff" "1"
# Tests of WRITE_COMMAND lengths for WishBone. Check the different lengths are
# accepted. For all of these we use the simple loop and write. There is no
# point testing sizes outside the range, since these fail in the test rather
# than the progrma under test. We use byte reads from the initialized loop
# Test of WRITE_COMMAND for WishBone 1 byte.
run_libsim "JTAG WRITE_COMMAND WB read length 1" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001aee68a5c00000000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "1"
# Test of WRITE_COMMAND for WishBone 0x10000 bytes. We only match the first
# few bytes of the shifted strings and data.
run_libsim "JTAG WRITE_COMMAND WB read length 0x10000" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000d2aaafa3fffe0000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "10000"
# Tests of WRITE_COMMAND with different alignments. Byte access should be
# aligned on any boundary. Half-word on half-word boundaries and word on word
# boundaries. In each case we use 4 byte transfers.
# Write bytes, aligned on byte 0
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 0 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000107557c0580000000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100000" "4"
# Write bytes, aligned on byte 1
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 1 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000c53f4b0580010000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100001" "4"
# Write bytes, aligned on byte 2
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 2 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001e660678580008000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100002" "4"
# Write bytes, aligned on byte 3
run_libsim "JTAG WRITE_COMMAND WB write bytes, byte 3 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000240a508580018000100008" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "0" "100003" "4"
# Write half words, aligned on byte 0
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 0 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000001778a9e180000000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100000" "4"
# Write half words, aligned on byte 1
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 1 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001d5129ee180010000100108" \
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100001" "4"
# Write half words, aligned on byte 2
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 2 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000f64db26180008000100108" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100002" "4"
# Write half words, aligned on byte 3
run_libsim "JTAG WRITE_COMMAND WB write half words, byte 3 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000013427856180018000100108" \
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "1" "100003" "4"
# Write words, aligned on byte 0
run_libsim "JTAG WRITE_COMMAND WB write words, byte 0 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018f4396f780000000100088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100000" "4"
# Write words, aligned on byte 1
run_libsim "JTAG WRITE_COMMAND WB write words, byte 1 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000004d29a1f780010000100088" \
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100001" "4"
# Write words, aligned on byte 2
run_libsim "JTAG WRITE_COMMAND WB write words, byte 2 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000016e768d7780008000100088" \
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100002" "4"
# Write words, aligned on byte 3
run_libsim "JTAG WRITE_COMMAND WB write words, byte 3 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000ac1cba7780018000100088" \
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "2" "100003" "4"
# Read bytes, aligned on byte 0
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 0 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000982f0f3d80000000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100000" "4"
# Read bytes, aligned on byte 1
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 1 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000015a45383d80010000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100001" "4"
# Read bytes, aligned on byte 2
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 2 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000791a14bd80008000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100002" "4"
# Read bytes, aligned on byte 3
run_libsim "JTAG WRITE_COMMAND WB read bytes, byte 3 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001bb7023bd80018000100048" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "4" "100003" "4"
# Read half words, aligned on byte 0
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 0 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000018802dad980000000100148" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100000" "4"
# Read half words, aligned on byte 1
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 1 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000004a68edd980010000100148" \
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100001" "4"
# Read half words, aligned on byte 2
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 2 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000016937c15980008000100148" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100002" "4"
# Read half words, aligned on byte 3
run_libsim "JTAG WRITE_COMMAND WB read half words, byte 3 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000ab5df65980018000100148" \
"ERROR: JTAG WishBone 16-bit access must be 2-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "5" "100003" "4"
# Read words, aligned on byte 0
run_libsim "JTAG WRITE_COMMAND WB read words, byte 0 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000001039e5cf800000001000c8" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100000" "4"
# Read words, aligned on byte 1
run_libsim "JTAG WRITE_COMMAND WB read words, byte 1 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001d253d2cf800100001000c8" \
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100001" "4"
# Read words, aligned on byte 2
run_libsim "JTAG WRITE_COMMAND WB read words, byte 2 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000000f10cfe4f800080001000c8" \
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100002" "4"
# Read words, aligned on byte 3
run_libsim "JTAG WRITE_COMMAND WB read words, byte 3 aligned" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x0000000000174841bc61" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000013366c94f800180001000c8" \
"ERROR: JTAG WishBone 32-bit access must be 4-byte aligned." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "0" "WRITE_COMMAND" "6" "100003" "4"
# Tests of WRITE_COMMAND for CPU0. Check the different access types are
# accepted/rejected as expected (2 and 6 are OK).
# WRITE_COMMAND to write bytes for CPU0 (access type 0). This should fail
# with an error message.
run_libsim "JTAG WRITE_COMMAND CPU0 write bytes" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000011b285d1780010028000008" \
"ERROR: JTAG 8-bit access for SPR not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "0" "2801" "4"
# WRITE_COMMAND to write half words for CPU0 (access type 1). This should fail
# with an error message.
run_libsim "JTAG WRITE_COMMAND CPU0 write half words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000000b0588f380010028000108" \
"ERROR: JTAG 16-bit access for SPR not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "1" "2801" "4"
# WRITE_COMMAND to write words for CPU0 (access type 2).
run_libsim "JTAG WRITE_COMMAND CPU0 write words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001933eb7e580010028000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "2801" "4"
# WRITE_COMMAND to write access type 3. This should fail with an error
# message.
run_libsim "JTAG WRITE_COMMAND CPU0 access type 3" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000008313620180010028000188" \
"ERROR: unknown JTAG SPR access type 3." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "3" "2801" "4"
# WRITE_COMMAND to read bytes for CPU0 (access type 4). This should fail
# with an error message.
run_libsim "JTAG WRITE_COMMAND CPU0 read bytes" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000084522e2f80010028000048" \
"ERROR: JTAG 8-bit access for SPR not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "4" "2801" "4"
# WRITE_COMMAND to read half words for CPU0 (access type 5). This should fail
# with an error message.
run_libsim "JTAG WRITE_COMMAND CPU0 read half words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001947ffbcb80010028000148" \
"ERROR: JTAG 16-bit access for SPR not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "5" "2801" "4"
# WRITE_COMMAND to read words for CPU0 (access type 6)
run_libsim "JTAG WRITE_COMMAND CPU0 read words" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000000c44c4dd800100280000c8" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4"
# WRITE_COMMAND to read access type 7. This should fail with an error message.
run_libsim "JTAG WRITE_COMMAND CPU0 access type 7" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000011c691139800100280001c8" \
"ERROR: unknown JTAG SPR access type 7." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "7" "2801" "4"
# Tests of WRITE_COMMAND addresses for CPU0. Addresses up to 0xffff are
# OK. Check different addresses are all accepted. For all of these we use the
# simple loop and a word write. Test the boundaries (addresses 0, 0xffff and
# 0x10000). Over-size addresses should be truncated with a warning. Remember
# these are SPR addresses, which are effectively word addresses.
# WRITE_COMMAND for CPU0 to address 0
run_libsim "JTAG WRITE_COMMAND CPU0 write address 0" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001efa3017580000000000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "0" "4"
# WRITE_COMMAND for CPU0 to address 0xffff
run_libsim "JTAG WRITE_COMMAND CPU0 write address 0xffff" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000012e99654d8001fffe000088" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "ffff" "4"
# WRITE_COMMAND for CPU0 to address 0x10000. Should be trucated witha
# warning.
run_libsim "JTAG WRITE_COMMAND CPU0 write address 0x10000" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000008c6e605180000001000088" \
"Warning: truncated JTAG SPR address 0x00010000." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "2" "10000" "4"
# Tests of WRITE_COMMAND lengths for CPU0. Check only length 4 is
# accepted. For all of these we use the simple loop and write. There is no
# point in testing values outside the permitted range, since these are
# rejected in the test code, rather than the target code. Test sizes 3, 4, 5
# and 0x10000 bytes.
# Test of WRITE_COMMAND for CPU0 3 bytes. This should fail with an error
# message.
run_libsim "JTAG WRITE_COMMAND CPU0 read length 3" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x0000000001d735c29c800100280000c8" \
"ERROR: JTAG SPR access 0x3 bytes not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "3"
# Test of WRITE_COMMAND for CPU0 4 bytes.
run_libsim "JTAG WRITE_COMMAND CPU0 read length 4" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000000c44c4dd800100280000c8" \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "4"
# Test of WRITE_COMMAND for CPU0 5 bytes. This should fail with an error
# message.
run_libsim "JTAG WRITE_COMMAND CPU0 read length 5" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x00000000014c51002c400100280000c8" \
"ERROR: JTAG SPR access 0x5 bytes not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "5"
# Test of WRITE_COMMAND for CPU0 0x10000 bytes. This should fail with an error
# message.
run_libsim "JTAG WRITE_COMMAND CPU0 read length 0x10000" \
[list "Initalization succeeded." \
"Execution step completed OK." \
"Resetting JTAG." \
"Execution step completed OK." \
"Shifting instruction." \
" shifting in: 0x01" \
" shifted out: 0x01" \
" time taken:" \
"Execution step completed OK." \
"Selecting module." \
" shifting in: 0x00000000000aff51d871" \
" shifted out: 0x0164841bc60000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Processing WRITE_COMMAND." \
" shifting in: 0x000000000046c16443ffff00280000c8" \
"ERROR: JTAG SPR access 0x10000 bytes not supported." \
" shifted out: 0x164841bc600000000000000000000000" \
" status: 0x0" \
" time taken:" \
"Execution step completed OK." \
"Test completed successfully."] \
"lib-jtag/lib-jtag-full" "" "loop/loop-init" "RESET" "INSTRUCTION" \
"8" "SELECT_MODULE" "1" "WRITE_COMMAND" "6" "2801" "10000"
Go to most recent revision | Compare with Previous | Blame | View Log