URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [doc/] [ORPmref.tex] - Rev 328
Go to most recent revision | Compare with Previous | Blame | View Log
\documentstyle[10pt]{letter} \topmargin -2cm \textwidth 19cm \textheight 28cm \hoffset -2cm \begin{document} \newcommand{\addorpcmd}[3]{{\small\tt#1}\hfil&{\small\tt #2}\hfil&{\small\rm#3}\hfil\\} \thispagestyle{empty} \begin{centering} \noindent{\large{\bf ORP Monitor Quick Reference}\\\ \\} \noindent \begin{tabular}{lp{5cm}p{7cm}}\hline {\bf Command} & {\bf Parameters} & {\bf Description} \\ \hline\hline \addorpcmd{help}{}{shows help} \addorpcmd{dm}{$<$start addr$>$ [$<$end addr$>$]}{display 32-bit memory location(s)} \addorpcmd{pm}{$<$addr$>$ [$<$stop\_addr$>$] $<$value$>$}{patch 32-bit memory location(s)} \addorpcmd{copy}{[$<$dst\_addr$>$ [$<$src\_addr [$<$length$>$]]]}{copy memory} \addorpcmd{mfspr}{$<$spr\_addr$>$}{show SPR} \addorpcmd{mtspr}{$<$spr\_addr$>$ $<$value$>$}{set SPR} \hline \addorpcmd{crc}{[$<$src\_addr$>$ [$<$length$>$ [$<$init\_crc$>$]]]}{calculates a 32-bit CRC on specified memory region} \addorpcmd{tftp}{[$<$file$>$ [$<$srv\_ip$>$ [$<$src\_addr$>$]]]}{TFTP download} \addorpcmd{ic\_enable}{}{enable instruction cache} \addorpcmd{ic\_disable}{}{disable instruction cache} \addorpcmd{dc\_enable}{}{enable data cache} \addorpcmd{dc\_disable}{}{disable data cache} \addorpcmd{ram\_test}{$<$start\_addr$>$ $<$stop\_addr$>$ [$<$test\_no$>$]}{run a simple RAM test} \addorpcmd{dhry}{[$<$num\_runs$>$]}{run dhrystone} \hline \addorpcmd{globals}{}{show globals and their current values} \addorpcmd{src\_addr}{$<$value$>$}{sets global parameter source address} \addorpcmd{dst\_addr}{$<$value$>$}{sets global parameter destination address} \addorpcmd{start\_addr}{$<$value$>$}{sets global parameter start address} \addorpcmd{length}{$<$value$>$}{sets global parameter {\tt length}} \addorpcmd{erase\_method}{$<$value$>$ $<$value$>$ $<$value$>$}{sets flash erase method global parameter (0=do~not~erase, 1=fully, 2=as~needed)} \addorpcmd{set\_dest\_addr}{$<$addrhi$>$ $<$addrmid$>$ $<$addrlo$>$}{set destination address global parameter} \addorpcmd{ip}{$<$value$>$ $<$value$>$ $<$value$>$}{sets {\tt ip} address global parameter} \addorpcmd{srv\_ip}{$<$value$>$ $<$value$>$ $<$value$>$}{sets server ip address global parameter} \hline \addorpcmd{eth\_init}{}{init ethernet} \addorpcmd{show\_txbd}{[$<$start BD$>$] [$<$max$>$]}{show Tx buffer desc} \addorpcmd{show\_rxbd}{[$<$start BD$>$] [$<$max$>$]}{show Rx buffer desc} \addorpcmd{send\_packet}{$<$length$>$ [$<$start data$>$] [$<$num\_of\_packets$>$]}{create and send packet(s)} \addorpcmd{init\_txbd\_pool}{$<$max$>$}{initialize Tx buffer descriptors} \addorpcmd{init\_rxbd\_pool}{$<$max$>$}{initialize Rx buffer descriptors} \addorpcmd{show\_phy\_reg}{[$<$start\_addr$>$] [$<$end addr$>$]}{show PHY registers} \addorpcmd{set\_phy\_reg}{$<$addr$>$ $<$value$>$}{set PHY register} \addorpcmd{show\_mac\_regs}{}{show all MAC registers} \addorpcmd{eth\_int\_enable}{}{enable ethernet interrupt} \addorpcmd{show\_rx\_buffs}{[$<$show\_all$>$]}{show receive buffers (optional argument will also show empty buffers)} \addorpcmd{show\_tx\_buffs}{}{show transmit buffers} \hline \addorpcmd{crt\_enable}{}{enables CRT} \addorpcmd{crt\_disable}{}{disables CRT} \addorpcmd{crt\_test}{}{enables CRT and displays some test patterns} \addorpcmd{camera\_enable}{}{enables camera} \addorpcmd{camera\_disable}{}{disables camera} \hline \end{tabular} \end{centering} \end{document}
Go to most recent revision | Compare with Previous | Blame | View Log