URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [flash_reset.S] - Rev 712
Go to most recent revision | Compare with Previous | Blame | View Log
#include "spr-defs.h"
#include "board.h"
#define TRAP_ON_ERROR 0
#define LOOP_ON_ERROR 0
#define EXIT_NOP_ON_ERROR 1
#define PRINT_AND_RESET_ON_ERROR 1
.extern _src_beg
.extern _dst_beg
.extern _dst_end
.extern int_main
.extern int_error
.extern tick_interrupt
.extern _crc32
.extern _bstart
.extern _bend
.global _calc_mycrc32
.global _mycrc32
.global _mysize
.section .stack, "aw", @nobits
.space STACK_SIZE
_stack:
.section .crc
_mycrc32:
.word 0xcccccccc
_mysize:
.word 0xdddddddd
.if SELF_CHECK
_calc_mycrc32:
l.addi r3,r0,0
l.movhi r4,hi(_calc_mycrc32)
l.ori r4,r4,lo(_calc_mycrc32)
l.movhi r5,hi(_mysize)
l.ori r5,r5,lo(_mysize)
l.lwz r5,0(r5)
l.addi r1,r1,-4
l.sw 0(r1),r9
/* unsigned long crc32 (unsigned long crc, const unsigned char *buf, unsigned long len); */
l.jal _crc32
l.nop
l.movhi r3,hi(_mycrc32)
l.ori r3,r3,lo(_mycrc32)
l.lwz r3,0(r3)
l.xor r11,r3,r11
l.lwz r9,0(r1)
l.jr r9
l.addi r1,r1,4
.endif
.org 0x100
.section .reset, "ax"
_reset:
l.movhi r0, 0
/* Clear status register, set supervisor mode */
l.ori r1, r0, SPR_SR_SM
l.mtspr r0, r1, SPR_SR
/* Clear timer */
l.mtspr r0, r0, SPR_TTMR
/* Jump to start routine */
l.movhi r3,hi(_start)
l.ori r3,r3,lo(_start)
l.jr r3
l.nop
.section .vectors, "ax"
.org 0x200
_buserr:
.if TRAP_ON_ERROR
/* Just trap */
l.trap 0
.endif
.if EXIT_NOP_ON_ERROR
l.nop 0x1
.endif
.if LOOP_ON_ERROR
l.j 0
l.nop
.endif
.if PRINT_AND_RESET_ON_ERROR
l.mfspr r4, r0, SPR_EPCR_BASE
l.j _int_error /* This will reset */
l.ori r3, r0, 0x2
.endif
.section .vectors, "ax"
.org 0x500
_tickint:
#define TIMER_RELOAD_VALUE (SPR_TTMR_IE | SPR_TTMR_RT | ((IN_CLK/TICKS_PER_SEC) & SPR_TTMR_PERIOD))
/* Simply load timer_ticks variable and increment */
.extern _timer_ticks
l.addi r1, r1, -136 /* 128 + what we need (8),avoid area used by gcc*/
l.sw 0(r1), r25
l.sw 4(r1), r26
l.movhi r25, hi(timestamp)
l.ori r25, r25, lo(timestamp)
l.lwz r26, 0(r25) /* Load variable addr.*/
l.addi r26, r26, 1 /* Increment variable */
l.sw 0(r25), r26 /* Store variable */
l.movhi r25, hi(TIMER_RELOAD_VALUE) /* Load timer value */
l.ori r25, r25, lo(TIMER_RELOAD_VALUE)
l.mtspr r0, r25, SPR_TTMR /* Reset timer */
l.lwz r25, 0(r1)
l.lwz r26, 4(r1)
l.addi r1, r1, 136
l.rfe
.section .vectors, "ax"
.org 0x600
_alignerr:
.if TRAP_ON_ERROR
/* Just trap */
l.trap 0
.endif
.if EXIT_NOP_ON_ERROR
l.nop 0x1
.endif
.if LOOP_ON_ERROR
l.j 0
l.nop
.endif
.if PRINT_AND_RESET_ON_ERROR
l.mfspr r4, r0, SPR_EPCR_BASE
l.j _int_error /* This will reset */
l.ori r3, r0, 0x6
.endif
.org 0x700
_illinsn:
.if TRAP_ON_ERROR
/* Just trap */
l.trap 0
.endif
.if EXIT_NOP_ON_ERROR
l.nop 0x1
.endif
.if LOOP_ON_ERROR
l.j 0
l.nop
.endif
.if PRINT_AND_RESET_ON_ERROR
l.mfspr r4, r0, SPR_EPCR_BASE
l.j _int_error /* This will reset */
l.ori r3, r0, 0x7
.endif
.org 0x800
_userint:
l.addi r1,r1,-256 /*(128 + 128) */
l.sw 0x0(r1),r2
l.addi r2, r1, 256
l.sw 0x4(r1), r3
l.movhi r3,hi(_int_wrapper)
l.ori r3,r3,lo(_int_wrapper)
l.jr r3
l.nop
.section .text
_start:
/* Copy form flash to sram */
l.movhi r3,hi(_src_beg)
l.ori r3,r3,lo(_src_beg)
l.movhi r4,hi(_vec_start)
l.ori r4,r4,lo(_vec_start)
l.movhi r5,hi(_vec_end)
l.ori r5,r5,lo(_vec_end)
l.sub r5,r5,r4
l.sfeqi r5,0
l.bf 2f
l.nop
1: l.lwz r6,0(r3)
l.sw 0(r4),r6
l.addi r3,r3,4
l.addi r4,r4,4
l.addi r5,r5,-4
l.sfgtsi r5,0
l.bf 1b
l.nop
2:
l.movhi r4,hi(_dst_beg)
l.ori r4,r4,lo(_dst_beg)
l.movhi r5,hi(_dst_end)
l.ori r5,r5,lo(_dst_end)
1: l.sfgeu r4,r5
l.bf 1f
l.nop
l.lwz r8,0(r3)
l.sw 0(r4),r8
l.addi r3,r3,4
l.bnf 1b
l.addi r4,r4,4
1:
l.addi r3,r0,0
l.addi r4,r0,0
3:
/* Instruction cache enable */
/* Check if IC present and skip enabling otherwise */
l.mfspr r24,r0,SPR_UPR
l.andi r26,r24,SPR_UPR_ICP
l.sfeq r26,r0
l.bf .L8
l.nop
/* Disable IC */
l.mfspr r6,r0,SPR_SR
l.addi r5,r0,-1
l.xori r5,r5,SPR_SR_ICE
l.and r5,r6,r5
l.mtspr r0,r5,SPR_SR
/* Establish cache block size
If BS=0, 16;
If BS=1, 32;
r14 contain block size
*/
l.mfspr r24,r0,SPR_ICCFGR
l.andi r26,r24,SPR_ICCFGR_CBS
l.srli r28,r26,7
l.ori r30,r0,16
l.sll r14,r30,r28
/* Establish number of cache sets
r16 contains number of cache sets
r28 contains log(# of cache sets)
*/
l.andi r26,r24,SPR_ICCFGR_NCS
l.srli r28,r26,3
l.ori r30,r0,1
l.sll r16,r30,r28
/* Invalidate IC */
l.addi r6,r0,0
l.sll r5,r14,r28
.L7:
l.mtspr r0,r6,SPR_ICBIR
l.sfne r6,r5
l.bf .L7
l.add r6,r6,r14
/* Enable IC */
l.mfspr r6,r0,SPR_SR
l.ori r6,r6,SPR_SR_ICE
l.mtspr r0,r6,SPR_SR
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
.L8:
/* Data cache enable */
/* Check if DC present and skip enabling otherwise */
l.mfspr r24,r0,SPR_UPR
l.andi r26,r24,SPR_UPR_DCP
l.sfeq r26,r0
l.bf .L10
l.nop
/* Disable DC */
l.mfspr r6,r0,SPR_SR
l.addi r5,r0,-1
l.xori r5,r5,SPR_SR_DCE
l.and r5,r6,r5
l.mtspr r0,r5,SPR_SR
/* Establish cache block size
If BS=0, 16;
If BS=1, 32;
r14 contain block size
*/
l.mfspr r24,r0,SPR_DCCFGR
l.andi r26,r24,SPR_DCCFGR_CBS
l.srli r28,r26,7
l.ori r30,r0,16
l.sll r14,r30,r28
/* Establish number of cache sets
r16 contains number of cache sets
r28 contains log(# of cache sets)
*/
l.andi r26,r24,SPR_DCCFGR_NCS
l.srli r28,r26,3
l.ori r30,r0,1
l.sll r16,r30,r28
/* Invalidate DC */
l.addi r6,r0,0
l.sll r5,r14,r28
.L9:
l.mtspr r0,r6,SPR_DCBIR
l.sfne r6,r5
l.bf .L9
l.add r6,r6,r14
/* Enable DC */
l.mfspr r6,r0,SPR_SR
l.ori r6,r6,SPR_SR_DCE
l.mtspr r0,r6,SPR_SR
.L10:
/* Set up stack */
l.movhi r1,hi(_stack-4)
l.ori r1,r1,lo(_stack-4)
l.addi r2,r0,-3
l.and r1,r1,r2
l.movhi r3,hi(main)
l.ori r3,r3,lo(main)
l.jr r3
l.nop
_int_wrapper:
l.sw 0x8(r1), r4
l.sw 0xc(r1), r5
l.sw 0x10(r1), r6
l.sw 0x14(r1), r7
l.sw 0x18(r1), r8
l.sw 0x1c(r1), r9
l.sw 0x20(r1), r10
l.sw 0x24(r1), r11
l.sw 0x28(r1), r12
l.sw 0x2c(r1), r13
l.sw 0x30(r1), r14
l.sw 0x34(r1), r15
l.sw 0x38(r1), r16
l.sw 0x3c(r1), r17
l.sw 0x40(r1), r18
l.sw 0x44(r1), r19
l.sw 0x48(r1), r20
l.sw 0x4c(r1), r21
l.sw 0x50(r1), r22
l.sw 0x54(r1), r23
l.sw 0x58(r1), r24
l.sw 0x5c(r1), r25
l.sw 0x60(r1), r26
l.sw 0x64(r1), r27
l.sw 0x68(r1), r28
l.sw 0x6c(r1), r29
l.sw 0x70(r1), r30
l.sw 0x74(r1), r31
l.movhi r3,hi(int_main)
l.ori r3,r3,lo(int_main)
l.jalr r3
l.nop
l.lwz r3,0x4(r1)
l.lwz r4,0x8(r1)
l.lwz r5,0xc(r1)
l.lwz r6,0x10(r1)
l.lwz r7,0x14(r1)
l.lwz r8,0x18(r1)
l.lwz r9,0x1c(r1)
l.lwz r10,0x20(r1)
l.lwz r11,0x24(r1)
l.lwz r12,0x28(r1)
l.lwz r13,0x2c(r1)
l.lwz r14,0x30(r1)
l.lwz r15,0x34(r1)
l.lwz r16,0x38(r1)
l.lwz r17,0x3c(r1)
l.lwz r18,0x40(r1)
l.lwz r19,0x44(r1)
l.lwz r20,0x48(r1)
l.lwz r21,0x4c(r1)
l.lwz r22,0x50(r1)
l.lwz r23,0x54(r1)
l.lwz r24,0x58(r1)
l.lwz r25,0x5c(r1)
l.lwz r26,0x60(r1)
l.lwz r27,0x64(r1)
l.lwz r28,0x68(r1)
l.lwz r29,0x6c(r1)
l.lwz r30,0x70(r1)
l.lwz r31,0x74(r1)
l.lwz r2, 0x0(r1)
l.addi r1,r1,256
l.rfe
l.nop
/* Jump to error function. Clobber r2 */
_int_error:
l.movhi r2,hi(int_error)
l.ori r2,r2,lo(int_error)
l.jr r2
l.nop
Go to most recent revision | Compare with Previous | Blame | View Log