URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [bootloaders/] [orpmon/] [sim.cfg] - Rev 248
Go to most recent revision | Compare with Previous | Blame | View Log
/* sim.cfg -- Simulator configuration script file
Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
This file is part of OpenRISC 1000 Architectural Simulator.
It contains the default configuration and help about configuring
the simulator.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* INTRODUCTION
The ork1sim has various parameters, that are set in configuration files
like this one. The user can switch between configurations at startup by
specifying the required configuration file with the -f <filename.cfg> option.
If no configuration file is specified or1ksim searches for the default
configuration file sim.cfg. First it searches for './sim.cfg'. If this
file is not found, it searches for '~/or1k/sim.cfg'. If this file is
not found too, it reverts to the built-in default configuration.
NOTE: Users should not rely on the built-in configuration, since the
default configuration may differ between version.
Rather create a configuration file that sets all critical values.
This file may contain (standard C) comments only - no // support.
Configure files may be be included, using:
include "file_name_to_include"
Like normal configuration files, the included file is divided into
sections. Each section is described in detail also.
Some section have subsections. One example of such a subsection is:
device <index>
instance specific parameters...
enddevice
which creates a device instance.
*/
/* MEMORY SECTION
This section specifies how the memory is generated and the blocks
it consists of.
type = random/unknown/pattern
Specifies the initial memory values.
'random' generates random memory using seed 'random_seed'.
'pattern' fills memory with 'pattern'.
'unknown' does not specify how memory should be generated,
leaving the memory in a undefined state. This is the fastest
option.
random_seed = <value>
random seed for randomizer, used if type = 'random'.
pattern = <value>
pattern to fill memory, used if type = 'pattern'.
nmemories = <value>
number of memory instances connected
baseaddr = <hex_value>
memory start address
size = <hex_value>
memory size
name = "<string>"
memory block name
ce = <value>
chip enable index of the memory instance
mc = <value>
memory controller this memory is connected to
delayr = <value>
cycles, required for read access, -1 if instance does not support reading
delayw = <value>
cycles, required for write access, -1 if instance does not support writing
log = "<filename>"
filename, where to log memory accesses to, no log, if log command is not specified
*/
section memory
/*random_seed = 12345
type = random*/
pattern = 0x00
type = unknown /* Fastest */
name = "FLASH"
ce = 0
mc = 0
baseaddr = 0xf0000000
size = 0x01000000
delayr = 1
delayw = -1
end
section memory
/*random_seed = 12345
type = random*/
pattern = 0x00
type = unknown /* Fastest */
name = "RAM"
ce = 1
mc = 0
baseaddr = 0x00000000
size = 0x02000000
delayr = 1
delayw = 1
end
section memory
/*random_seed = 12345
type = random*/
pattern = 0x00
type = unknown /* Fastest */
name = "SRAM"
mc = 0
ce = 2
baseaddr = 0xa4000000
size = 0x00100000
delayr = 1
delayw = 1
end
/* IMMU SECTION
This section configures the Instruction Memory Manangement Unit
enabled = 0/1
'0': disabled
'1': enabled
(NOTE: UPR bit is set)
nsets = <value>
number of ITLB sets; must be power of two
nways = <value>
number of ITLB ways
pagesize = <value>
instruction page size; must be power of two
entrysize = <value>
instruction entry size in bytes
ustates = <value>
number of ITLB usage states (2, 3, 4 etc., max is 4)
hitdelay = <value>
number of cycles immu hit costs
missdelay = <value>
number of cycles immu miss costs
*/
section immu
enabled = 1
nsets = 64
nways = 1
pagesize = 8192
hitdelay = 0
missdelay = 0
end
/* DMMU SECTION
This section configures the Data Memory Manangement Unit
enabled = 0/1
'0': disabled
'1': enabled
(NOTE: UPR bit is set)
nsets = <value>
number of DTLB sets; must be power of two
nways = <value>
number of DTLB ways
pagesize = <value>
data page size; must be power of two
entrysize = <value>
data entry size in bytes
ustates = <value>
number of DTLB usage states (2, 3, 4 etc., max is 4)
hitdelay = <value>
number of cycles dmmu hit costs
missdelay = <value>
number of cycles dmmu miss costs
*/
section dmmu
enabled = 1
nsets = 64
nways = 1
pagesize = 8192
hitdelay = 0
missdelay = 0
end
/* IC SECTION
This section configures the Instruction Cache
enabled = 0/1
'0': disabled
'1': enabled
(NOTE: UPR bit is set)
nsets = <value>
number of IC sets; must be power of two
nways = <value>
number of IC ways
blocksize = <value>
IC block size in bytes; must be power of two
ustates = <value>
number of IC usage states (2, 3, 4 etc., max is 4)
hitdelay = <value>
number of cycles ic hit costs
missdelay = <value>
number of cycles ic miss costs
*/
section ic
enabled = 0
nsets = 512
nways = 1
blocksize = 16
hitdelay = 20
missdelay = 20
end
/* DC SECTION
This section configures the Data Cache
enabled = 0/1
'0': disabled
'1': enabled
(NOTE: UPR bit is set)
nsets = <value>
number of DC sets; must be power of two
nways = <value>
number of DC ways
blocksize = <value>
DC block size in bytes; must be power of two
ustates = <value>
number of DC usage states (2, 3, 4 etc., max is 4)
load_hitdelay = <value>
number of cycles dc load hit costs
load_missdelay = <value>
number of cycles dc load miss costs
store_hitdelay = <value>
number of cycles dc load hit costs
store_missdelay = <value>
number of cycles dc load miss costs
*/
section dc
enabled = 0
nsets = 512
nways = 1
blocksize = 16
load_hitdelay = 20
load_missdelay = 20
store_hitdelay = 20
store_missdelay = 20
end
/* SIM SECTION
This section specifies how or1ksim should behave.
verbose = 0/1
'0': don't print extra messages
'1': print extra messages
debug = 0-9
0 : no debug messages
1-9: debug message level.
higher numbers produce more messages
profile = 0/1
'0': don't generate profiling file 'sim.profile'
'1': don't generate profiling file 'sim.profile'
prof_fn = "<filename>"
optional filename for the profiling file.
valid only if 'profile' is set
mprofile = 0/1
'0': don't generate memory profiling file 'sim.mprofile'
'1': generate memory profiling file 'sim.mprofile'
mprof_fn = "<filename>"
optional filename for the memory profiling file.
valid only if 'mprofile' is set
history = 0/1
'0': don't track execution flow
'1': track execution flow
Execution flow can be tracked for the simulator's
'hist' command. Useful for back-trace debugging.
iprompt = 0/1
'0': start in <not interactive prompt> (so what do we start in ???)
'1': start in interactive prompt.
exe_log = 0/1
'0': don't generate execution log.
'1': generate execution log.
exe_log = default/hardware/simple/software
type of execution log, default is used when not specified
exe_log_start = <value>
index of first instruction to start logging, default = 0
exe_log_end = <value>
index of last instruction to end logging; not limited, if omitted
exe_log_marker = <value>
<value> specifies number of instructions before horizontal marker is
printed; if zero, markers are disabled (default)
exe_log_fn = "<filename>"
filename for the exection log file.
valid only if 'exe_log' is set
clkcycle = <value>[ps|ns|us|ms]
specifies time measurement for one cycle
*/
section sim
verbose = 1
debug = 0
profile = 0
history = 0
/*exe_log = 1*/
/*exe_log_fn = "exe.log"*/
clkcycle = 10ns
end
/* SECTION VAPI
This section configures the Verification API, used for Advanced
Core Verification.
enabled = 0/1
'0': disbable VAPI server
'1': enable/start VAPI server
server_port = <value>
TCP/IP port to start VAPI server on
log_enabled = 0/1
'0': disable VAPI requests logging
'1': enable VAPI requests logging
hide_device_id = 0/1
'0': don't log device id (for compatability with old version)
'1': log device id
vapi_fn = <filename>
filename for the log file.
valid only if log_enabled is set
*/
section VAPI
enabled = 0
server_port = 9998
log_enabled = 0
vapi_log_fn = "vapi.log"
end
/* CPU SECTION
This section specifies various CPU parameters.
ver = <value>
rev = <value>
specifies version and revision of the CPU used
upr = <value>
changes the upr register
sr = <value>
sets the initial Supervision Register value
supervisor mode (SM) and fixed one (FO) set = 0x8001
exception prefix high (EPH, vectors@0xf0000000) = 0x4000
together, (SM | FO | EPH) = 0xc001
superscalar = 0/1
'0': CPU is scalar
'1': CPU is superscalar
(modify cpu/or32/execute.c to tune superscalar model)
hazards = 0/1
'0': don't track data hazards in superscalar CPU
'1': track data hazards in superscalar CPU
If tracked, data hazards can be displayed using the
simulator's 'r' command.
dependstats = 0/1
'0': don't calculate inter-instruction dependencies.
'1': calculate inter-instruction dependencies.
If calculated, inter-instruction dependencies can be
displayed using the simulator's 'stat' command.
sbuf_len = <value>
length of store buffer (<= 256), 0 = disabled
*/
section cpu
ver = 0x12
cfg = 0x00
rev = 0x01
sr = 0x8001 /*SPR_SR_FO | SPR_SR_SM | SPR_SR_EPH */
/* upr = */
superscalar = 0
hazards = 0
dependstats = 0
sbuf_len = 0
end
/* PM SECTION
This section specifies Power Management parameters
enabled = 0/1
'0': disable power management
'1': enable power management
*/
section pm
enabled = 0
end
/* BPB SECTION
This section specifies how branch prediction should behave.
enabled = 0/1
'0': disable branch prediction
'1': enable branch prediction
btic = 0/1
'0': disable branch target instruction cache model
'1': enable branch target instruction cache model
sbp_bf_fwd = 0/1
Static branch prediction for 'l.bf'
'0': don't use forward prediction
'1': use forward prediction
sbp_bnf_fwd = 0/1
Static branch prediction for 'l.bnf'
'0': don't use forward prediction
'1': use forward prediction
hitdelay = <value>
number of cycles bpb hit costs
missdelay = <value>
number of cycles bpb miss costs
*/
section bpb
enabled = 0
btic = 0
sbp_bf_fwd = 0
sbp_bnf_fwd = 0
hitdelay = 0
missdelay = 0
end
/* DEBUG SECTION
This sections specifies how the debug unit should behave.
enabled = 0/1
'0': disable debug unit
'1': enable debug unit
gdb_enabled = 0/1
'0': don't start gdb server
'1': start gdb server at port 'server_port'
server_port = <value>
TCP/IP port to start gdb server on
valid only if gdb_enabled is set
vapi_id = <hex_value>
Used to create "fake" vapi log file containing the JTAG proxy messages.
*/
section debug
enabled = 0
/* gdb_enabled = 0 */
/* server_port = 9999*/
rsp_enabled = 1
rsp_port = 50001
end
/* MC SECTION
This section configures the memory controller
enabled = 0/1
'0': disable memory controller
'1': enable memory controller
baseaddr = <hex_value>
address of first MC register
POC = <hex_value>
Power On Configuration register
index = <value>
Index of this memory controller amongst all the memory controllers
*/
section mc
enabled = 0
baseaddr = 0x93000000
POC = 0x00000008 /* Power on configuration register */
index = 0
end
/* UART SECTION
This section configures the UARTs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first UART register for this device
channel = <channeltype>:<args>
The channel parameter indicates the source of received UART characters
and the sink for transmitted UART characters.
The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
(without quotes).
A) To send/receive characters from a pair of files, use a file
channel:
channel=file:<rxfile>,<txfile>
B) To create an interactive terminal window, use an xterm channel:
channel=xterm:[<xterm_arg>]*
C) To create a bidirectional tcp socket which one could, for example,
access via telnet, use a tcp channel:
channel=tcp:<port number>
D) To cause the UART to read/write from existing numeric file
descriptors, use an fd channel:
channel=fd:<rx file descriptor num>,<tx file descriptor num>
E) To connect the UART to a physical serial port, create a tty
channel:
channel=tty:device=/dev/ttyS0,baud=9600
irq = <value>
irq number for this device
16550 = 0/1
'0': this device is a UART16450
'1': this device is a UART16550
jitter = <value>
in msecs... time to block, -1 to disable it
vapi_id = <hex_value>
VAPI id of this instance
*/
section uart
enabled = 1
baseaddr = 0x90000000
irq = 2
/* channel = "file:uart0.rx,uart0.tx" */
/* channel = "tcp:10084" */
channel = "xterm:"
jitter = -1 /* async behaviour */
16550 = 1
end
/* DMA SECTION
This section configures the DMAs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first DMA register for this device
irq = <value>
irq number for this device
vapi_id = <hex_value>
VAPI id of this instance
*/
section dma
enabled = 1
baseaddr = 0x9a000000
irq = 11
end
/* ETHERNET SECTION
This section configures the ETHERNETs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first ethernet register for this device
dma = <value>
which controller is this ethernet "connected" to
irq = <value>
ethernet mac IRQ level
rtx_type = <value>
use 0 - file interface, 1 - socket interface
rx_channel = <value>
DMA channel used for RX
tx_channel = <value>
DMA channel used for TX
rxfile = "<filename>"
filename, where to read data from
txfile = "<filename>"
filename, where to write data to
sockif = "<ifacename>"
interface name of ethernet socket
vapi_id = <hex_value>
VAPI id of this instance
*/
section ethernet
enabled = 1
baseaddr = 0x92000000
/* dma = 0 */
irq = 4
rtx_type = 0
/* tx_channel = 0 */
/* rx_channel = 1 */
rxfile = "eth0.rx"
txfile = "eth0.tx"
sockif = "eth0"
end
/* GPIO SECTION
This section configures the GPIOs
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first GPIO register for this device
irq = <value>
irq number for this device
base_vapi_id = <hex_value>
first VAPI id of this instance
GPIO uses 8 consecutive VAPI IDs
*/
section gpio
enabled = 0
baseaddr = 0x91000000
irq = 3
base_vapi_id = 0x0200
end
/* VGA SECTION
This section configures the VGA/LCD controller
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
address of first VGA register
irq = <value>
irq number for this device
refresh_rate = <value>
number of cycles between screen dumps
filename = "<filename>"
template name for generated names (e.g. "primary" produces "primary0023.bmp")
*/
section vga
enabled = 0
baseaddr = 0x97100000
irq = 8
refresh_rate = 100000
filename = "primary"
end
/* TICK TIMER SECTION
This section configures tick timer
enabled = 0/1
whether tick timer is enabled
*/
section pic
enabled = 1
edge_trigger = 1
end
/* FB SECTION
This section configures the frame buffer
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
base address of frame buffer
paladdr = <hex_value>
base address of first palette entry
refresh_rate = <value>
number of cycles between screen dumps
filename = "<filename>"
template name for generated names (e.g. "primary" produces "primary0023.bmp")
*/
section fb
enabled = 0
baseaddr = 0x97000000
refresh_rate = 1000000
filename = "primary"
end
/* KBD SECTION
This section configures the PS/2 compatible keyboard
baseaddr = <hex_value>
base address of the keyboard device
rxfile = "<filename>"
filename, where to read data from
*/
section kbd
enabled = 0
irq = 5
baseaddr = 0x94000000
rxfile = "kbd.rx"
end
/* ATA SECTION
This section configures the ATA/ATAPI host controller
baseaddr = <hex_value>
address of first ATA register
enabled = <0|1>
Enable/disable the peripheral. By default if it is enabled.
irq = <value>
irq number for this device
debug = <value>
debug level for ata models.
0: no debug messages
1: verbose messages
3: normal messages (more messages than verbose)
5: debug messages (normal debug messages)
7: flow control messages (debug statemachine flows)
9: low priority message (display everything the code does)
dev_type0/1 = <value>
ata device 0 type
0: NO_CONNeCT: none (not connected)
1: FILE : simulated harddisk
2: LOCAL : local system harddisk
dev_file0/1 = "<filename>"
filename for simulated ATA device
valid only if dev_type0 == 1
dev_size0/1 = <value>
size of simulated hard-disk (in MBytes)
valid only if dev_type0 == 1
dev_packet0/1 = <value>
0: simulated ATA device does NOT implement PACKET command feature set
1: simulated ATA device does implement PACKET command feature set
FIXME: irq number
*/
section ata
enabled = 0
baseaddr = 0x9e000000
irq = 15
end
Go to most recent revision | Compare with Previous | Blame | View Log