URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [ChangeLog-2007] - Rev 714
Go to most recent revision | Compare with Previous | Blame | View Log
2007-12-27 Samuel Tardieu <sam@rfc1149.net>
PR ada/34553
* adaint.c (__gnat_open_new_temp, __gnat_tmp_name): Use mkstemp()
instead of mktemp() or tmpnam() on NetBSD.
2007-12-23 Eric Botcazou <ebotcazou@adacore.com>
* trans.c (call_to_gnu): Make the temporary for non-addressable
In parameters passed by reference.
(addressable_p): Return true for STRING_CST and CALL_EXPR.
2007-12-19 Robert Dewar <dewar@adacore.com>
* g-expect-vms.adb, g-expect.adb, s-poosiz.adb:
Add pragma Warnings (Off) for unassigned IN OUT arguments
* sem_warn.adb (Output_Reference): Suppress messages for internal names
(Check_References): Extensive changes to tune up warnings
(Output_Non_Modifed_In_Out_Warnings): Changes to tune up warnings
(Has_Pragma_Unmodifed_Check_Spec): New function
(Check_References): Implement pragma Unmodified
(Warn_On_Unassigned_Out_Parameter): Implement pragma Unmodified
* par-prag.adb: Dummy entry for pragma Unmodified
* sem_prag.adb: Implement pragma Unmodified
* einfo.ads, einfo.adb: (Has_Pragma_Unmodified): New flag
(Proc_Next_Component_Or_Discriminant): Fix typo.
Update comments.
* sem_util.adb (Note_Possible_Modification): Add processinng for pragma
Unmodified.
(Reset_Analyzed_Flags): Use Traverse_Proc instead of Traverse_Func,
because the former already takes care of discarding the result.
(Mark_Coextensions): Remove ununused initial value from Is_Dynamic.
Add comment.
* snames.h, snames.ads, snames.adb: Add entry for pragma Unmodified
2007-12-19 Eric Botcazou <ebotcazou@adacore.com>
* targparm.adb, targparm.ads, system.ads, system-darwin-ppc.ads,
system-vxworks-x86.ads, system-linux-ppc.ads, system-linux-hppa.ads,
system-hpux-ia64.ads, system-vxworks-arm.ads, system-darwin-x86.ads,
system-vms_64.ads, system-vms-ia64.ads, system-linux-ia64.ads,
system-freebsd-x86.ads, system-linux-x86_64.ads, system-tru64.ads,
system-aix.ads, system-vxworks-sparcv9.ads, system-solaris-x86.ads,
system-irix-o32.ads, system-irix-n32.ads, system-hpux.ads,
system-vxworks-m68k.ads, system-linux-x86.ads, system-vxworks-mips.ads,
system-solaris-sparc.ads, system-solaris-sparcv9.ads, system-vms.ads,
system-mingw.ads, system-vms-zcx.ads, system-vxworks-ppc.ads
(Dynamic_Trampolines_Used): Delete.
* system-lynxos-x86.ads, system-lynxos-ppc.ads: Ditto.
Turn on stack probing mechanism on LynxOS.
2007-12-19 Bob Duff <duff@adacore.com>
* atree.ads, atree.adb (Traverse_Func): Walk Field2 last, and eliminate
the resulting tail recursion by hand. This prevents running out of
memory on deeply nested concatenations, since Field2 is where the left
operand of concatenations is stored.
Fix bug (was returning OK_Orig in some cases). Fix return subtype to
clarify that it can only return OK or Abandon.
* sem_res.adb (Resolve_Op_Concat): Replace the recursion on the left
operand by iteration, in order to avoid running out of memory on
deeply-nested concatenations. Use the Parent pointer to get back up the
tree.
(Resolve_Op_Concat_Arg, Resolve_Op_Concat_First,
Resolve_Op_Concat_Rest): New procedures split out of
Resolve_Op_Concat, so the iterative algorithm in Resolve_Op_Concat is
clearer.
* checks.adb (Remove_Checks): Use Traverse_Proc instead of
Traverse_Func, because the former already takes care of discarding the
result.
* errout.adb (First_Node): Use Traverse_Proc instead of Traverse_Func,
because the former already takes care of discarding the result.
(Remove_Warning_Messages): Use appropriate subtype for Status and
Discard
2007-12-19 Ed Schonberg <schonberg@adacore.com>
* exp_aggr.adb (Not_OK_For_Backend): A component of a private type with
discriminants forces expansion of the aggregate into assignments.
(Init_Record_Controller): If the type of the aggregate is untagged and
is not inherently limited, the record controller is not limited either.
2007-12-19 Robert Dewar <dewar@adacore.com>
* exp_attr.adb (Expand_N_Attribute_Reference, case Size): Fix error in
handling compile time known size of record or array (case of front end
layout active, e.g. in GNAAMP).
2007-12-19 Javier Miranda <miranda@adacore.com>
* exp_ch3.adb (Expand_N_Object_Declaration): Complete the circuitry
that forces the construction of static dispatch tables in case of
record subtypes.
2007-12-19 Robert Dewar <dewar@adacore.com>
* exp_ch9.adb (Null_Statements): Moved to library level
(Trivial_Accept_OK): New function
(Expand_Accept_Declaration): Use Trivial_Accept_OK
(Expand_N_Accept_Statement): Use Trivial_Accept_OK
2007-12-19 Robert Dewar <dewar@adacore.com>
* exp_pakd.adb (Expand_Bit_Packed_Element_Set): Fix packed array type
in complex case where array is Volatile.
2007-12-19 Ed Schonberg <schonberg@adacore.com>
* freeze.adb (Freeze_Record_Type, Check_Current_Instance): Implement
properly the Ada2005 rules concerning when the current instance of a
record type is aliased.
2007-12-19 Ed Schonberg <schonberg@adacore.com>
* par-ch3.adb (P_Record_Declaration): Guard against cascaded errors in
mangled declaration
(P_Type_Declaration): Diagnose misuse of "abstract" in untagged record
declarations.
(P_Variant_Part): Cleaner patch for parenthesized discriminant
2007-12-19 Vincent Celier <celier@adacore.com>
* prj-attr.adb (Package_Node_Id_Of): Returns Unknown_Package when
package is not known
* prj-attr.ads (Unknown_Package): New constant
Do not crash when an unknown package is in several projects
* prj-dect.adb (Parse_Package_Declaration): Mark an unknown package as
ignored
* prj-nmsc.adb (Check): Remove obsolete code related to no longer
existing package Language_Processing.
2007-12-19 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
Samuel Tardieu <sam@rfc1149.net>
PR ada/15803, ada/15805
* sem_ch6.adb, sem_ch3.adb (Constrain_Access): In Ada2005, diagnose
illegal access subtypes when there is a constrained partial view.
(Check_For_Premature_Usage): New procedure inside
Access_Subprogram_Declaration for checking that an access-to-subprogram
type doesn't reference its own name within any formal parameters or
result type (including within nested anonymous access types).
(Access_Subprogram_Declaration): Add call to Check_For_Premature_Usage.
(Sem_Ch3.Analyze_Object_Declaration, Sem_ch6.Process_Formals): if the
context is an access_to_variable, the expression cannot be an
access_to_constant.
2007-12-19 Bob Duff <duff@adacore.com>
* sem_ch4.adb (Analyze_Concatenation_Rest): New procedure.
(Analyze_Concatenation): Use iteration instead of recursion in order
to avoid running out of stack space for deeply nested concatenations.
2007-12-19 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* sem_ch8.adb (Analyze_Subprogram_Renaming): Diagnose illegal renamings
whose renamed entity is a subprogram that requires overriding.
(Premature_Usage): Test for the case of N_Full_Type_Declaration when
issuing an error for premature usage and issue a message that says
'type' rather than 'object'.
2007-12-19 Gary Dismukes <dismukes@adacore.com>
PR ada/34149
* sem_disp.adb (Check_Dispatching_Call): Augment existing test for
presence of a statically tagged operand (Present (Static_Tag)) with
test for Indeterm_Ancestor_Call when determining whether to propagate
the static tag to tag-indeterminate operands (which forces dispatching
on such calls).
(Check_Controlling_Formals): Ada2005, access parameters can have
defaults.
(Add_Dispatching_Operation, Check_Operation_From_Private_View): do
not insert subprogram in list of primitive operations if already there.
2007-12-19 Tristan Gingold <gingold@adacore.com>
* utils.c (create_var_decl_1): call rest_of_decl_compilation only for
global variable.
2007-12-19 Thomas Quinot <quinot@adacore.com>
Part of PR ada/33688
* gen-soccon.c: Add constant IP_PKTINFO to allow getting ancillary
datagram info on Linux.
2007-12-19 Vincent Celier <celier@adacore.com>
* makegpr.adb (Check_Compilation_Needed): Normalize C_Source_Path so
that the source path name is always found in the dependencies.
2007-12-19 Robert Dewar <dewar@adacore.com>
* gnat_rm.texi, gnat_ugn.texi: Update documentation of -gnatw.o
Fix name of Wide_Wide_Latin_1/9 file names
Add documentation for Ada.Exceptions.Last_Chance_Handler (a-elchha.ads)
Add missing documentation for Ada.Wide_[Wide_]Characters.Unicode
Add missing documentation for Ada.Command_Line.Response_File
Update list of warning letters for Warnings pragma
Add documentation for pragma Unmodified
2007-12-19 Samuel Tardieu <sam@rfc1149.net>
* Makefile.in: Add s-tasinf.ad[bs] substitutions for sh4-linux target.
2007-12-17 Arnaud Charlet <charlet@adacore.com>
* s-vxwork-alpha.ads: Removed, no longer used.
2007-12-15 Jakub Jelinek <jakub@redhat.com>
* Make-lang.in (gnat1, gnatbind): Pass ALL_CFLAGS on the link line.
2007-12-13 Samuel Tardieu <sam@rfc1149.net>
PR ada/34360
* Makefile.in: Change two occurrences of mlib-tgt.adb by correct name
mlib-tgt-specific.adb.
2007-12-13 Bob Duff <duff@adacore.com>
* trans.c (Attribute_to_gnu): Check for violations of the
No_Implicit_Dynamic_Code restriction. This checking used to be done in
the front end, but is moved here so we can make it more accurate.
2007-12-13 Pascal Obry <obry@adacore.com>
* adaint.c (__gnat_pthread_setaffinity_np): New routine. A dummy
version is provided for older GNU/Linux distribution not
supporting thread affinity sets.
* s-osinte-linux.ads (SC_NPROCESSORS_ONLN): New constant for sysconf
call.
(bit_field): New packed boolean type used by cpu_set_t.
(cpu_set_t): New type corresponding to the C type with
the same name. Note that on the Ada side we use a bit
field array for the affinity mask. There is not need
for the C macro for setting individual bit.
(pthread_setaffinity_np): New imported routine.
* s-taprop-linux.adb (Enter_Task): Check that the CPU affinity mask is
no null.
(Create_Task): Set the processor affinity mask if information
is present.
* s-tasinf-linux.ads, s-tasinf-linux.adb: New files.
2007-12-13 Robert Dewar <dewar@adacore.com>
* s-osinte-lynxos-3.ads, s-osinte-hpux.ads, s-osinte-solaris-posix.ads,
s-osinte-freebsd.ads, s-osinte-lynxos.ads, s-osinte-tru64.ads,
s-osinte-mingw.ads, s-osinte-aix.ads, s-osinte-hpux-dce.ads,
s-osinte-irix.ads, s-osinte-solaris.ads, s-intman-vms.adb,
s-osinte-vms.ads, s-osinte-vxworks6.ads, s-osinte-vxworks.ads,
s-auxdec.ads, s-auxdec-vms_64.ads, s-osinte-darwin.ads,
s-taprop-vms.adb, s-interr-sigaction.adb, s-osinte-linux-hppa.ads,
i-vxwork-x86.ads, s-tpopde-vms.ads: Add missing pragma Convention C
for subprogram pointers.
* g-ctrl_c.adb: New file.
* g-ctrl_c.ads (Install_Handler): New body.
* freeze.adb (Freeze_Subprogram): Use new flag Has_Pragma_Inline_Always
instead of obsolete function Is_Always_Inlined.
(Freeze_Entity): check for tagged type in imported C subprogram
(Freeze_Entity): check for 8-bit boolean in imported C subprogram
(Freeze_Entity): check for convention Ada subprogram pointer in
imported C subprogram.
(Freeze_Fixed_Point_Type): In the case of a base type where the low
bound would be chopped off and go from negative to zero, force
Loval_Excl_EP to be the same as Loval_Incl_EP (the included lower
bound) so that the size computation for the base type will take
negative values into account.
2007-12-13 Eric Botcazou <ebotcazou@adacore.com>
Bob Duff <duff@adacore.com>
Tristan Gingold <gingold@adacore.com>
* system-linux-ia64.ads, system-freebsd-x86.ads, system-lynxos-ppc.ads,
system-lynxos-x86.ads, system-linux-x86_64.ads, system-tru64.ads,
system-aix.ads, system-vxworks-sparcv9.ads, system-solaris-x86.ads,
system-irix-o32.ads, system-irix-n32.ads, system-hpux.ads,
system-vxworks-m68k.ads, system-linux-x86.ads, system-vxworks-mips.ads,
system-solaris-sparc.ads, system-solaris-sparcv9.ads, system-vms.ads,
system-mingw.ads, system-vms-zcx.ads, system-vxworks-ppc.ads,
system-vxworks-arm.ads, system-darwin-x86.ads, system.ads,
system-vms_64.ads, system-darwin-ppc.ads, system-vxworks-x86.ads,
system-linux-ppc.ads, system-linux-hppa.ads, system-hpux-ia64.ads,
system-vms-ia64.ads (Stack_Check_Limits): New target parameter.
(Always_Compatible_Rep): New flag to control trampolines globally.
(Dynamic_Trampolines_Used): New flag for implementing the
No_Implicit_Dynamic_Code restriction more correctly (not yet used,
and not yet set correctly for some targets).
* s-taprop-vxworks.adb: Use stack limit method of stack checking.
Simply indirectly call s-stchop when a task is created.
* ali.ads:
New flag added: Stack_Check_Switch_Set which is set when '-fstack-check'
appears as an argument (entries A) in an ALI file.
* fe.h (Stack_Check_Limits): Declare new target parameter.
(Check_Implicit_Dynamic_Code_Allowed): New procedure.
* init.c: Declare __gnat_set_stack_limit_hook for VxWorks kernel RTS.
This variable is declared in C to be sure not subject to elaboration
code.
(__gnat_map_signal, VxWorks): In kernel mode, map SIGILL to
Storage_Error.
* targparm.ads, targparm.adb (Stack_Check_Limits): New parameter.
(Always_Compatible_Rep, Dynamic_Trampolines_Used): New parameters.
* s-stchop.ads: Add comments.
* s-stchop-vxworks.adb: Package almost fully rewritten to use stack
limit method of stack checking.
* s-stchop-limit.ads: New file.
2007-12-13 Robert Dewar <dewar@adacore.com>
* sem_ch5.adb, s-taskin.adb, a-ciorma.adb, a-coorma.adb, a-cohama.adb,
a-cihama.adb, g-awk.adb,
s-inmaop-posix.adb: Update handling of assigned value/unreferenced
warnings
* exp_smem.adb: Update handling of assigned value/unreferenced warnings
* sem.adb: Update handling of assigned value/unreferenced warnings
* a-exexpr-gcc.adb: Add a pragma warnings off for boolean return
* lib-xref.ads: Improve documentation for k xref type
* lib-xref.adb:
Update handling of assigned value/unreferenced warnings
(Generate_Reference): Warning for reference to entity for which a
pragma Unreferenced has been given should be unconditional.
If the entity is a discriminal, mark the original
discriminant as referenced.
* sem_warn.ads, sem_warn.adb
(Check_One_Unit): Test Renamed_In_Spec to control giving warning for
no entities referenced in package
(Check_One_Unit): Don't give message about no entities referenced in
a package if a pragma Unreferenced has appeared.
Handle new warning flag -gnatw.a/-gnatw.A
Update handling of assigned value/unreferenced warnings
* atree.h: Add flags up to Flag247
(Flag231): New macro.
2007-12-13 Jose Ruiz <ruiz@adacore.com>
* adaint.h: (__gnat_plist_init): Not defined for RTX.
* initialize.c (__gnat_initialize): Do not call __gnat_plist_init for
RTX systems.
* Makefile.in: Add new files s-tasinf-linux.ads and s-tasinf-linux.adb.
(LIBGNAT_TARGET_PAIRS, MISCLIB, THREADSLIB,
EXTRA_GNATRTL_NONTASKING_OBJS, EXTRA_GNATRTL_TASKING_OBJS,
GNATLIB_SHARED for RTX run time): Use the versions required by RTX.
* mingw32.h:
Do not define GNAT_UNICODE_SUPPORT for RTX since it is not supported.
* sysdep.c (winflush_function for RTX): Procedure that does nothing
since we only have problems with Windows 95/98, which are not
supported by RTX.
(__gnat_ttyname): Return the empty string on Nucleus, just as
done on vxworks.
2007-12-13 Robert Dewar <dewar@adacore.com>
* a-textio.adb, a-textio.ads:
Extensive changes to private part for wide character encoding
* a-witeio.adb, a-witeio.ads, a-ztexio.ads, a-ztexio.adb
(Look_Ahead): Fix mishandling of encoded sequences
Move declaration of Wch_Con to private part (should not be visible)
* ali.adb (Scan_ALI): Set default encoding method to brackets instead of
UTF-8. Probably this is never used, but if it is, brackets is
clearly correct.
* bindgen.adb (Get_WC_Encoding): New procedure to properly handle
setting wide character encoding for no main program case and when
encoding is specified using -W?
Initialize stack limit of environment task if stack limit method of
stack checking is enabled.
(Gen_Adainit_Ada): Use Get_WC_Encoding to output encoding method
(Gen_Adainit_C): Use Get_WC_Encoding to output encoding method
(Get_Main_Unit_Name): New function.
(Gen_Adainit_Ada): Add call to main program for .NET when needed.
(Gen_Output_File): Set Bind_Main_Program to True for .NET
* bindusg.adb: Add line for -Wx switch
* s-wchcon.adb, s-wchcon.ads: (Is_Start_Of_Encoding): New function
Add comments
Add new useful constant WC_Longest_Sequences
* switch-b.adb: Clean up handling of -Wx switch
For -gnatWx, set Wide_Character_Encoding_Method_Specified
* switch-c.adb: -gnatg activates warning on assertion errors
For -gnatWx, set Wide_Character_Encoding_Method_Specified
* s-wchcon.adb: (Is_Start_Of_Encoding): New function
2007-12-13 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* a-ngcoty.adb: New pragma Fast_Math
* opt.adb: New pragma Fast_Math
* par-prag.adb:
Add Implemented_By_Entry to the list of pragmas which do not require any
special processing.
(Favor_Top_Level): New pragma.
New pragma Fast_Math
* exp_attr.adb: Move Wide_[Wide_]Image routines to Exp_Imgv
(Expand_N_Attribute_Reference, Displace_Allocator_Pointer,
Expand_Allocator_Expression): Take into account VM_Target
(Expand_Attribute, case 'Identity): Handle properly the case where
the prefix is a task interface.
New pragma Fast_Math
* par.adb (Next_Token_Is): New function
(P_Pragma): Add Skipping parameter
(U_Left_Paren): New procedure
(U_Right_Paren): New procedure
New pragma Fast_Math
* par-ch10.adb (P_Subunit): Unconditional msg for missing ) after
subunit
New pragma Fast_Math
* sem_prag.adb: Add significance value to table Sig_Flag for pragma
Implemented_By_Entry.
(Analyze_Pragma): Add case for Ada 2005 pragma Implemented_By_Entry.
(Set_Inline_Flags): Do not try to link pragma Inline onto chain of rep
items, since it can apply to more than one overloadable entity. Set
new flag Has_Pragma_Inline_Always for Inline_Always case.
(Analyze_Pragma, case Complex_Representation): Improve error message.
(Analyze_Pragma, case Assert): When assertions are disabled build the
rewritten code with Sloc of expression rather than pragma, so new
warning about failing is not deleted.
(Analyze_Pragma): Allow pragma Preelaborable_Initialization to apply to
protected types and update error message to reflect that. Test whether
the protected type is allowed for the pragma (an error is issued if the
type has any entries, or components that do not have preelaborable
initialization).
New pragma Fast_Math
(Analyze_Pragma, case No_Return): Handle generic instance
* snames.h, snames.ads, snames.adb:
Add new predefined name for interface primitive _Disp_Requeue.
New pragma Fast_Math
* a-tags.ads, a-tags.adb: New calling sequence for
String_To_Wide_[Wide_]String
(Secondary_Tag): New subprogram.
* exp_imgv.ads, exp_imgv.adb: Move Wide_[Wide_]Image routines here
from Exp_Attr
New calling sequence for String_To_Wide_[Wide_]String
(Expand_Image_Attribute): Major rewrite. New calling sequence avoids
the use of the secondary stack for image routines.
* a-except-2005.adb, s-wchstw.ads, s-wchstw.adb, s-wwdenu.adb: New
calling sequence for String_To_Wide_[Wide_]String
* par-ch3.adb (P_Declarative_Items): Recognize use of Overriding in
Ada 95 mode
(P_Unknown_Discriminant_Part_Opt): Handle missing parens gracefully
Remove Atree.Delete_Tree/Delete_Node and Nlist.Delete_List
* par-ch6.adb (P_Subprogram): Recognize use of Overriding in Ada 95 mode
(P_Formal_Part): Use Skipping parameter in P_Pragma call
to improve error recovery
* par-util.adb (Next_Token_Is): New function
(Signal_Bad_Attribute): Use new Namet.Is_Bad_Spelling_Of function
* par-ch2.adb (Skip_Pragma_Semicolon): Do not resynchronize to
semicolon if missing
(P_Pragma): Implement new Skipping parameter
Remove Atree.Delete_Tree/Delete_Node and Nlist.Delete_List
Fix location of flag for unrecognized pragma message
* par-tchk.adb (U_Left_Paren): New procedure
(U_Right_Paren): New procedure
2007-12-13 Geert Bosch <bosch@adacore.com>
* a-tifiio.adb:
(Put_Int64): Use Put_Digit to advance Pos. This fixes a case where
the second or later Scaled_Divide would omit leading zeroes,
resulting in too few digits produced and a Layout_Error as result.
(Put): Initialize Pos.
2007-12-13 Robert Dewar <dewar@adacore.com>
atree.ads, atree.adb (Flag231..Flag247): New functions
(Set_Flag231..Set_Flag247): New procedures
(Basic_Set_Convention): Rename Set_Convention to be
Basic_Set_Convention
(Nkind_In): New functions
Remove Atree.Delete_Tree/Delete_Node and Nlist.Delete_List
* exp_ch6.adb (Expand_Call): Use new flag Has_Pragma_Inline_Always
instead
of obsolete function Is_Always_Inlined
(Register_Predefined_DT_Entry): Initialize slots of the second
secondary dispatch table.
Remove Atree.Delete_Tree/Delete_Node and Nlist.Delete_List
(Expand_N_Function_Call): Remove special provision for stack checking.
* exp_util.ads, exp_util.adb (Is_Predefined_Dispatching_Operation):
Include _Disp_Requeue in the list of predefined operations.
(Find_Interface_ADT): Modified to fulfill the new specification.
Remove Atree.Delete_Tree/Delete_Node and Nlist.Delete_List
* par-ch4.adb, nlists.ads, nlists.adb:
Remove Atree.Delete_Tree/Delete_Node and Nlist.Delete_List
* sinfo.ads, sinfo.adb: (Nkind_In): New functions
Fix location of flag for unrecognized pragma message
* sem_ch7.adb: Use Nkind_In
2007-12-13 Vincent Celier <celier@adacore.com>
* opt.ads:
Indicate what flags are used by the Project Manager, gprbuild and
gprclean.
(Opt.Follow_Links_For_Dirs): New flag
(Warn_On_Assertion_Failure): New flag
(Wide_Character_Encoding_Method_Specified): New flag
(Suppress_All_Inlining): New switch set by -fno-inline
(Real_VMS_Target): New flag
New pragma Fast_Math
2007-12-13 Robert Dewar <dewar@adacore.com>
* back_end.adb: Recognize -fno-inline
2007-12-13 Robert Dewar <dewar@adacore.com>
* checks.adb: Fix optimization problem with short-circuited form
2007-12-13 Bob Duff <duff@adacore.com>
* clean.adb (Usage): Add line for -aP
(Check_Version_And_Help): Change Check_Version_And_Help to be generic,
with a parameter "procedure Usage", instead of passing a pointer to a
procedure. This is to eliminate trampolines (since the Usage procedure
is often nested in a main procedure, and it would be inconvenient to
unnest it).
* g-comlin.adb (For_Each_Simple_Switch): Change For_Each_Simple_Switch
to be generic, with a parameter "procedure Callback (...)", instead of
passing a pointer to a procedure. This is to eliminate trampolines
(since the Callback procedure is usually nested).
* gnatfind.adb, switch.adb, switch.ads, gnatlink.adb, gnatls.adb,
gnatname.adb, gnatxref.adb, gnatchop.adb, gprep.adb, gnatbind.adb
(Check_Version_And_Help): Change Check_Version_And_Help to be generic.
* g-pehage.adb (Compute_Edges_And_Vertices, Build_Identical_Key_Sets):
Use the generic Heap_Sort_G instead of Heap_Sort_A.
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
* einfo.ads, einfo.adb: Flag 232 is now Implemented_By_Entry.
(Implemented_By_Entry, Set_Implemented_By_Entry): New routines.
(Write_Entry_Flags): Add an entry for Implemented_By_Entry.
(Renamed_In_Spec): New flag
(Has_Pragma_Inline_Always): New flag
Add missing doc for pragma Obsolescent_Warning
Add missing doc for 17 additional unused flags (230-247)
(Is_Derived_Type): Remove condition "not Is_Generic_Type".
Alphabetize with clauses.
Separate Is_Thunk and Has_Thunks flags
(Write_Entity_Flags): Add forgotten entry for Has_Thunks
(Related_Interface): Renamed to Related_Type.
(Has_Thunks/Set_Has_Thunks): Subprograms of new attribute.
(Set_Is_Flag): Restrict the assertion.
2007-12-13 Vincent Celier <celier@adacore.com>
* errout.adb (Output_Source_Line): Do not keep a trailing space after
the source line number if the source line is empty.
2007-12-13 Geert Bosch <bosch@adacore.com>
* eval_fat.adb (Decompose_Int): Handle argument of zero.
(Compose): Remove special casing of zero.
(Exponent): Likewise.
(Fraction): Likewise.
(Machine): Likewise.
(Decompose): Update comment.
2007-12-13 Ed Schonberg <schonberg@adacore.com>
* exp_aggr.adb (Build_Record_Aggr_Code): If there is an aggregate for a
limited ancestor part, initialize controllers of enclosing record
before expanding ancestor aggregate.
(Gen_Assign): If a component of the aggregate is box-initialized, add
code to call Initialize if the component is controlled, and explicit
assignment of null if the component is an access type.
Handle properly aggregates for limited types that appear in object
declarations when the aggregate contains controlled values such as
protected types.
When expanding limited aggregates into individual components, do not
call Adjust on controlled components that are limited.
2007-12-13 Ed Schonberg <schonberg@adacore.com>
* expander.adb: Take into account N_Subprogram_Renaming_Declaration
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
* exp_ch3.adb (Predefined_Primitive_Bodies): Generate the body of
predefined primitive _Disp_Requeue.
(Make_Predefined_Primitive_Specs): Create the spec for predefined
primitive _Disp_Requeue.
(Make_Predefined_Primitive_Specs/Predefined_Primitive_Bodies): Set the
type of formal Renamed_Eq to Entity_Id (instead of Node_Id).
(Make_Predefined_Primitive_Specs): Spec of "=" needed if the parent is
an interface type. In case of limited interfaces we now declare all the
predefined primitives associated with synchronized interfaces as
abstract.
(Predef_Spec_Or_Body): For interface types generate abstract subprogram
declarations.
(Predefined_Primitive_Bodies): Add body of "=" if the parent of the
tagged type is an interface type and there is no user-defined equality
function.
Add also bodies of predefined primitives associated with synchronized
interfaces.
(Freeze_Record_Type): Do not build bodies of predefined primitives of
interface types because they are now defined abstract.
Add missing documentation.
(Expand_Record_Controller): Update occurrence of Related_Interface
to Related_Type.
(Build_Offset_To_Top_Functions): Do nothing in case of VM.
(Expand_N_Object_Declaration): Take into account VM_Target when handling
class wide interface object declaration.
(Expand_Previous_Access_Type): Do not create a duplicate master entity
if the access type already has one.
(Expand_N_Object_Declaration): Defend against attempt to validity check
generic types. Noticed for -gnatVcf specified with previous errors.
2007-12-13 Arnaud Charlet <charlet@adacore.com>
* exp_ch4.adb (Expand_N_Attribute_Reference, Displace_Allocator_Pointer,
Expand_Allocator_Expression): Take into account VM_Target
* exp_ch5.adb (Expand_N_Extended_Return_Statement): Do not use
secondary stack when VM_Target /= No_VM
2007-12-13 Javier Miranda <miranda@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_ch7.adb (Expand_N_Package_Body): Replace occurrence of attribute
Is_Complation_Unit by Is_Library_Level_Entity in the code
that decides if the static dispatch tables need to be built.
(Wrap_Transient_Declaration): Do not generate a finalization call if
this is a renaming declaration and the renamed object is a component
of a controlled type.
2007-12-13 Gary Dismukes <dismukes@adacore.com>
* exp_ch8.ads, exp_ch8.adb (Expand_N_Subprogram_Renaming_Declaration):
In the case where the renamed subprogram is a dereference, call
Force_Evaluation on the prefix.
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_ch9.adb (Expand_N_Asynchronous_Select,
Expand_N_Conditional_Entry_Call, Expand_N_Timed_Entry_Call): Code and
comment reformatting.
(Set_Privals): Inherit aliased flag from formal. From code reading.
(Build_Simple_Entry_Call): Out parameters of an access type are passed
by copy and initialized from the actual. This includes entry parameters.
(Expand_N_Requeue_Statement): Reimplement in order to handle both Ada 95
and Ada 2005 models of requeue.
(Null_Statements): Still connsider do-end block null if it contains
Unreferenced and Warnings pragmas.
(Expand_N_Accept_Statement): Do not optimize away null do end if
dispatching policy is other than defaulted.
(Expand_N_Timed_Entry_Call): When the triggering statement is a
dispatching call, manually analyze the delay statement.
(Find_Parameter_Type): Move subprogram to Sem_Util.
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
Javier Miranda <miranda@adacore.com>
* exp_disp.ads, exp_disp.adb (Default_Prim_Op_Position): Primitive
_Disp_Requeue occupies dispatch table slot number 15. Move
_Disp_Timed_Select to slot 16.
(Make_Disp_Requeue_Body, Make_Disp_Requeue_Spec): New routines which
generate the spec and body of _Disp_Reqeueue.
(Make_DT): Build and initialize the second dispatch table.
Handle initialization of RC_Offset when the parent
is a private type with variable size components.
(Make_Secondary_DT): Complete documentation. Add support to
initialize the second dispatch table.
(Make_Tags): Generate the tag of the second dispatch table.
(Register_Primitive): Add support to register primitives in the
second dispatch table.
2007-12-13 Pascal Obry <obry@adacore.com>
* expect.c (__gnat_kill) [WIN32]: Implement the SIGINT signal on
Windows. This signal is used by gnatmake to kill child processes for
example.
2007-12-13 Javier Miranda <miranda@adacore.com>
* exp_intr.adb (Expand_Dispatching_Constructor_Call): Add missing
support for generic dispatching constructor calls in which we need to
locate the tag of a secondary dispatch table associated with an
interface type to properly dispatch the call.
(Expand_N_Attribute_Reference [case Address],
Expand_Dispatching_Constructor_Call, Expand_Unc_Deallocation): Fix
handling of VM targets.
2007-12-13 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_prag.adb (Expand_Pragma_Assert): Recognize new warning flag for
assert fail
* ug_words: Add entries for -gnatw.a -gnatw.A
* sem_res.adb (Set_String_Literal_Subtype): If the context of the
literal is a subtype with non-static constraints, use the base type of
the context as the base of the string subtype, to prevent type
mismatches in gigi.
(Resolve_Actuals): If the actual is an entity name, generate a
reference before the actual is resolved and expanded, to prevent
spurious warnings on formals of enclosing protected operations.
(Analyze_Overloaded_Selected_Component): If type of prefix if
class-wide, use visible components of base type.
(Resolve_Selected_Component): Ditto.
(Resolve_Short_Circuit): Detect case of pragma Assert argument
evaluating to False, and issue warning message.
* usage.adb: Add lines for -gnatw.a and -gnatw.A
2007-12-13 Emmanuel Briot <briot@adacore.com>
* g-calend.ads (No_Time): New constant, to represent an uninitialized
time value
* g-catiio.ads, g-catiio.adb (Value): Added support for more date
formats.
(Month_Name_To_Number): New subprogram
* g-dirope.adb (Get_Current_Dir): On windows, normalize the drive
letter to upper-case.
2007-12-13 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* gnat1drv.adb (Gnat1drv): Properly set new flag Opt.Real_VMS_Target
* layout.adb (Resolve_Attribute, case 'Access): If designated type of
context is a limited view, use non-limited view when available. If the
non-limited view is an unconstrained array, this enforces consistency
requirements in 3.10.2 (27).
(Layout_Type): For an access type whose designated type is a limited
view, examine its declaration to determine if it is an unconstrained
array, and size the access type accordingly.
(Layout_Type): Do not force 32-bits for convention c subprogram
pointers in -gnatdm mode, only if real vms target.
* sem_attr.adb (Analyze_Access_Attribute): Use new flag
Has_Pragma_Inline_Always instead of obsolete function Is_Always_Inlined
(Analyze_Access_Attribute,Attribute_Address): Remove checks for
violations of the No_Implicit_Dynamic_Code restriction.
(Resolve_Attribute, case 'Access): If designated type of context is a
limited view, use non-limited view when available. If the non-limited
view is an unconstrained array, this enforces consistency requirements
in 3.10.2 (27).
(Layout_Type): For an access type whose designated type is a limited
view, examine its declaration to determine if it is an unconstrained
array, and size the access type accordingly.
2007-12-13 Vincent Celier <celier@adacore.com>
* gnatcmd.adb (GNATCmd): Do not issue -d= switch to gnatmetric when
object directory of main project does not exist.
On VMS, correctly set then environment variable for the source
directories.
2007-12-13 Vasiliy Fofanov <fofanov@adacore.com>
* g-regist.ads, g-regist.adb (Set_Value): new parameter Expand; when
set to True this procedure will create the value of type REG_EXPAND_SZ.
It was only possible to create REG_SZ values before.
2007-12-13 Robert Dewar <dewar@adacore.com>
* g-spchge.ads, g-spchge.adb, g-u3spch.adb, g-u3spch.ads,
g-wispch.adb, g-wispch.ads, g-zspche.adb, g-zspche.ads,
namet-sp.adb, namet-sp.ads: New files.
* g-speche.adb: Use generic routine in g-spchge
* s-wchcnv.ads, s-wchcnv.adb:
Minor code cleanup (make formal type consistent with spec)
* namet.adb: Update comments.
* par-endh.adb (Evaluate_End_Entry): Use new
Namet.Sp.Is_Bad_Spelling_Of function
* par-load.adb (Load): Use new Namet.Sp.Is_Bad_Spelling_Of function
* sem_aggr.adb (Resolve_Record_Aggregate): If a component of an
ancestor is an access type initialized with a box, set its type
explicitly, for use in subsequent expansion.
(Check_Misspelled_Component): Use new Namet.Sp.Is_Bad_Spelling_Of
function
2007-12-13 Robert Dewar <dewar@adacore.com>
* g-spipat.adb (Break): Fix accessibility error (vsn taking not null
access Vstring)
2007-12-13 Robert Dewar <dewar@adacore.com>
* inline.adb (Back_End_Cannot_Inline): Use new flag
Has_Pragma_Inline_Always instead of obsolete function Is_Always_Inlined
* sem_ch6.ads, sem_ch6.adb (Analyze_Subprogram_Body): Use new flag
Has_Pragma_Inline_Always instead.
of obsolete function Is_Always_Inlined
(Build_Body_To_Inline): Same change
(Cannot_Inline): Same change
Do not give warning on exception raise in No_Return function
* sem_ch13.adb (Analyze_Record_Representation_Clause): If an inherited
component has two inconsistent component clauses in the same record
representation clause, favor the message that complains about
duplication rather than inconsistency.
Update comments.
(Record_Representation_Clause): Do not warn on missing component
clauses for inherited components of a type extension.
(Rep_Item_Too_Late): Do not attempt to link pragma into rep chain for
an overloadable item if it is a pragma that can apply to multiple
overloadable entities (e.g. Inline) because a pragma cannot be on
more than one chain at a time.
(Validate_Unchecked_Conversion): Add code to warn on unchecked
conversion where one of the operands is Ada.Calendar.Time.
(Analyze_Attribute_Definition_Clause): Fix typo in error message.
For now, ignore Component_Size clause on VM targets, as done for
pragma Pack.
2007-12-13 Emmanuel Briot <briot@adacore.com>
Vincent Celier <celier@adacore.com>
* prj.ads, prj.adb (Is_A_Language): Now takes a Name_Id instead of a
string
(Must_Check_Configuration, Default_Language_Is_Ada): new flags in
prj.ads
(Hash): Move instantiation of System.HTable.Hash from spec to body
(prj-nmsc.adb): Optimize calls to Name_Find when on case sensitive
systems, since we do not need to recompute the Name_Id for the canonical
file name.
(Body_Suffix_Id_Of, Spec_Suffix_Id_Of): new version that takes a name_id
as a parameter. This parameter is in fact always "ada" in all calls, and
we were doing 160560 extra calls to Name_Find to convert it to Name_Ada
while loading a project with 40000 files
* prj-attr.adb: Fix name of attribute Dependency_Driver
Change the kind of indexing for attribute Root
* prj-dect.adb (Parse_Declarative_Items): Allow redeclarations of
variables already declared, in case constructions.
* prj-env.adb (Initialize): Reset Current_Source_Path_File and
Current_Object_Path_File to No_Path.
* prj-ext.adb (Initialize_Project_Path): In multi language mode, use
ADA_PROJECT_PATH if value of GPR_PROJECT_PATH is empty.
* prj-makr.adb: new parameter Current_Dir
* prj-nmsc.ads, prj-nmsc.adb (Find_Explicit_Sources): Do not look for
Ada sources when language is not Ada.
Change Opt.Follow_Links to Opt.Follow_Links_For_Files.
(Find_Excluded_Sources, Find_Explicit_Sources): new subprograms
(Must_Check_Configuration, Default_Language_Is_Ada): new flags.
(Locate_Directory): Always resolve links when computing Canonical_Path
(Look_For_Sources): Make sure that Name_Buffer contains the file name
in Source_Files before checking for the presence of a directory
separator.
Optimize calls to Name_Find when on case sensitive systems.
(Body_Suffix_Id_Of, Spec_Suffix_Id_Of): new version that takes a name_id
as a parameter.
(Prj.Nmsc.Check): new parameter Current_Dir
(Check_Ada_Naming_Schemes): Restrictions on suffixes are relaxed. They
cannot be empty and the spec suffix cannot be the same as the body or
separate suffix.
(Get_Unit): When a file name can be of several unit kinds (spec, body or
subunit), always consider the longest suffix.
(Check_Configuration): Do not issue an error if there is no compiler
for a language. Just issue a warning and ignore the sources for the
language.
(Check_Library_Attributes): Only check Library_Dir if Library_Name is
not empty.
(Check_Naming_Schemes.Maked_Unit): Only output message if high verbosity
(Unit_Exceptions): New hash table
(Check_Naming_Schemes): Check if a file that could be a unit because of
the naming scheme is not in fact a source because there is an exception
for the unit.
(Look_For_Sources): Put the unit exceptions in hash table
Unit_Exceptions
(Get_Unit_Exceptions): Give initial value No_Source to local variable
Other_Part to avoid exception when code is compiled with validity
checking.
(Get_Sources_From_File): Check that there is no directory information
in the file names.
(Look_For_Sources): Check that there is no directory information in the
list of file names in Source_Files.
(Look_For_Sources): In multi-language mode, do not allow exception file
names that are excluded.
(Excluded_Sources_Htable): New hash table
(Search_Directories.Check_File): New procedure to simplify
Search_Directories.
(Search_Directories): Do not consider excluded sources
(Look_For_Sources): Populate Excluded_Sources_Htable before calling
Search_Directories.
(Get_Exceptions): Set component Lang_Kind of Source_Data
(Get_Unit_Exceptions): Ditto
(Search_Directories): Ditto
* prj-pars.adb: new parameter Current_Dir
* prj-part.ads, prj-part.adb:
Change Opt.Follow_Links to Opt.Follow_Links_For_Files.
(Opt.Follow_Links_For_Dirs): New flag
(Project_Path_Name_Of): Cache information returned by this routine as
Locate_Regular_File is a costly routine. The code to output a log
information and the effective call to Locate_Regular_File is now
factorized into a routine (code clean-up).
(Parse, Parse_Single_Project): new parameter Current_Dir
When main project file cannot be found, indicate in the error
message the project path that was used to do the search.
* prj-proc.ads, prj-proc.adb (Opt.Follow_Links_For_Dirs): New flag
(Prj.Proc.Process*): new parameter Current_Dir
* switch-m.adb: Change Opt.Follow_Links to Opt.Follow_Links_For_Files
2007-12-13 Bob Duff <duff@adacore.com>
* restrict.ads, restrict.adb (Check_Implicit_Dynamic_Code_Allowed): New
procedure to be called from the back end to check the
No_Implicit_Dynamic_Code restriction.
2007-12-13 Arnaud Charlet <charlet@adacore.com>
* rtsfind.adb (Check_CRT): Take into account RTE_Available_Call
Fixes another case where RTE_Available_Call was ignored instead of being
taken into account.
(Load_Fail): Ditto.
* rtsfind.ads: Add new entries.
2007-12-13 Robert Dewar <dewar@adacore.com>
* g-byorma.adb, g-byorma.ads, g-decstr.adb, g-decstr.ads,
g-deutst.ads, g-encstr.adb, g-encstr.ads, g-enutst.ads: New files.
* scn.adb: Implement BOM recognition
2007-12-13 Thomas Quinot <quinot@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch10.adb (Check_Private_Child_Unit): A non-private library level
subprogram body that acts as its own spec may not have a non-private
WITH clause on a private sibling.
(Build_Unit_Name): If the parent unit in the name in a with_clause on a
child unit is a renaming, create an implicit with_clause on that
parent, and not on the unit it renames, to prevent visibility errors
in the current unit.
2007-12-13 Ed Schonberg <schonberg@adacore.com>
* sem_ch12.adb (Instantiate_Formal_Subprogram): In the subprogram
renaming declaration, use the Slocs of the formal parameters from the
declaration of the formal subprogram when creating the formal parameter
entities in the renaming declaration.
(Analyze_Formal_Type_Declaration): Change the placement of the error
message concerning illegal known discriminants. It is now posted on the
type rather than on the first discriminant. This change ensures early
error report.
(Freeze_Subprogram_Body): If the generic subprogram is nested within
the package body that contains the instance, do not generate an
out-of-place freeze node for the enclosing package.
(Collect_Previous_Instantiations): Ignore internal instantiations
generated for formal packages.
(Validate_Derived_Type_Instance): Add a check that when a formal
derived type is Known_To_Have_Preelab_Init then the actual type must
have preelaborable initialization, and issue an error when this
condition is violated.
2007-12-13 Robert Dewar <dewar@adacore.com>
* s-imenne.adb, s-imenne.ads: New files.
* s-imgboo.adb, s-imgboo.ads, s-imgcha.adb, s-imgcha.ads, s-imgdec.adb,
s-imgdec.ads, s-imgenu.ads, s-imgint.adb, s-imgint.ads, s-imglld.adb,
s-imglld.ads, s-imglli.adb, s-imglli.ads, s-imgllu.adb, s-imgllu.ads,
s-imgrea.adb, s-imgrea.ads, s-imguns.adb, s-imguns.ads, s-imgwch.adb,
s-imgwch.ads: New calling sequence for Image routines to avoid sec
stack usage.
2007-12-13 Javier Miranda <miranda@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch3.ads, sem_ch3.adb (Check_Abstract_Overriding): Avoid
generation of spurious error if parent is an interface type; caused
because predefined primitive bodies will be generated later by
Freeze_Record_Type.
(Process_Subtype): The subtype inherits the Known_To_Have_Preelab_Init
flag.
(Derive_Subprograms): Handle derivations of predefined primitives
after all the user-defined primitives to ensure that they are
found in proper order in instantiations.
(Add_Interface_Tag_Components, Inherit_Components): Update occurrences
of Related_Interface to Related_Type.
(Record_Type_Declaration): Minor reordering of calls to decorate the
Tag component because the entity must have set its Ekind attribute
before setting its Is_Tag attribute.
(Analyze_Subtype_Declaration): In the case of subtypes with
Private_Kind, inherit Known_To_Have_Preelab_Init from the parent.
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch4.adb (Analyze_Selected_Component): Include the requeue
statement to the list of contexts where a selected component with a
concurrent tagged type prefix should yield a primitive operation.
(Find_Primitive_Operation): Handle case of class-wide types.
(Analyze_Overloaded_Selected_Component): If type of prefix is
class-wide, use visible components of base type.
(Resolve_Selected_Component): Ditto.
(Try_Primitive_Operation, Collect_Generic_Type_Ops): If the type is a
formal of a generic subprogram. find candidate interpretations by
scanning the list of generic formal declarations.:
(Process_Implicit_Dereference_Prefix): If the prefix has an incomplete
type from a limited_with_clause, and the full view is available, use it
for subsequent semantic checks.
(Check_Misspelled_Selector): Use Namet.Sp.Is_Bad_Spelling_Of function
(Find_Primitive_Operation): New function.
(Analyze_Overloaded_Selected_Component): insert explicit dereference
only once if several interpretations of the prefix yield an access type.
(Try_Object_Operation): Code and comment cleanup.
(Analyze_Selected_Component): Reorder local variables. Minot comment and
code reformatting. When the type of the prefix is tagged concurrent, a
correct interpretation might be available in the primitive and
class-wide operations of the type.
2007-12-13 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch8.adb (Analyze_Subprogram_Renaming): Special error message for
renaming entry as subprogram using rename-as-body if subprogram spec
frozen.
(Use_One_Type): The clause is legal on an access type whose designated
type has a limited view.
(Find_Direct_Name): Use Namet.Sp.Is_Bad_Spelling_Of function
(Find_Expanded_Name): Use Namet.Sp.Is_Bad_Spelling_Of function
(Analyze_Renamed_Primitive_Operation): new procedure to determine the
operation denoted by a selected component.
(Analyze_Renamed_Entry): Resolve the prefix of the entry name, because
it can be an expression, possibly overloaded, that returns a task or
an access to one.
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* sem_ch9.adb (Analyze_Requeue): Add a local flag to capture whether a
requeue statement is dispatching. Do not emit an error when the name is
not an entry and the context is a dispatching select. Add code to
perform subtype conformance between the formals of the current entry
and those of the target interface primitive.
(Analyze_Asynchronous_Select, Analyze_Conditional_Entry_Call, Analyze_
Timed_Entry_Call): Analyze the triggering statement as the first step of
the processing. If this is a dispatching select, postpone the analysis
of all select statements until the Expander transforms the select. This
approach avoids generating duplicate identifiers after the Expander has
replicated some of the select statements. In case the Expander is
disabled, perform regular analysis.
(Check_Triggering_Statement): New routine.
(Analyze_Requeue): Exclude any interpretations that are not entries when
checking overloaded names in a requeue. Also test type conformance for
matching interpretations rather than requiring subtype conformance at
that point to conform with the RM's resolution rule for requeues.
2007-12-13 Ed Schonberg <schonberg@adacore.com>
* sem_disp.adb (Check_Dispatching_Call): If an actual in a call to an
inherited operation is a defaulted tag-indeterminate call, and there is
a statically tagged actual, use the static tag as a controlling actual
for the defaulted actual.
2007-12-13 Geert Bosch <bosch@adacore.com>
* sem_eval.adb (Eval_Real_Literal): N_Constant_Declaration is a static
context, so do not call Check_Non_Static_Context.
2007-12-13 Hristian Kirtchev <kirtchev@adacore.com>
* sem_type.adb (Function_Interp_Has_Abstract_Op): Add guard to check
whether formal E is an entity which may have parameters.
2007-12-13 Bob Duff <duff@adacore.com>
Javier Miranda <miranda@adacore.com>
Robert Dewar <dewar@adacore.com>
* sem_util.ads, sem_util.adb (Is_Concurrent_Interface): New routine.
(Set_Convention): New procedure to set the Convention flag, and in
addition make sure the Favor_Top_Level flag is kept in sync (all
foreign-language conventions require Favor_Top_Level = True).
(Collect_Abstract_Interfaces): Update occurrences of Related_Interface
to Related_Type.
(Collect_Interfaces_Info): Minor update to handle the two secondary
dispatch tables. Update occurrence of Related_Interface to Related_Type.
(Generate_Parent_Ref): Add parameter to specify entity to check
(Is_Preelaborable_Expression): Allow the name of a discriminant to
initialize a component of a type with preelaborable initialization.
This includes the case of a discriminal used in such a context.
(Is_Dependent_Component_Of_Mutable_Object): Take into account the
latest Ada 2005 rules about renaming and 'Access of
discriminant-dependent components.
(Check_Nested_Access): Add handling when there are no enclosing
subprograms (e.g. case of a package body).
(Find_Parameter_Type): Factor routine from several other compiler files.
Remove routine from Find_Overridden_Synchronized_Primitive.
2007-12-13 Thomas Quinot <quinot@adacore.com>
* sinput.adb (Get_Source_File_Index): Add assertion to guard against
an invalid access to an uninitialized slot in the
Source_File_Index_Table.
2007-12-13 Thomas Quinot <quinot@adacore.com>
* sinput-l.adb (Load_File): Disable style checks when preprocessing.
2007-12-13 Bob Duff <duff@adacore.com>
* s-soflin.ads: Apply new pragma Favor_Top_Level to all
access-to-subprogram types in this package.
2007-12-13 Olivier Hainque <hainque@adacore.com>
* s-stausa.ads (Stack_Analyzer): Remove First_Is_Topmost, redundant
with Stack_Grows_Down in System.Parameters. Rename Array_Address into
Stack_Overlay_Address and document that we are using an internal
abstraction.
(Byte_Size, Unsigned_32_Size): Remove, now useless.
(Pattern_Type, Bytes_Per_Pattern): New subtype and constant, to be used
consistently throughout the various implementation pieces.
* s-stausa.adb (Stack_Slots): New type, abstraction for the stack
overlay we are using to fill the stack area with patterns.
(Top_Slot_Index_In, Bottom_Slot_Index_In): Operations on Stack_Slots.
(Push_Index_Step_For, Pop_Index_Step_For): Likewise.
(Fill_Stack, Compute_Result): Use the Stack_Slots abstraction.
2007-12-13 Robert Dewar <dewar@adacore.com>
* s-stoele.adb ("mod"): mod negative value raises Constraint_Error
2007-12-13 Arnaud Charlet <charlet@adacore.com>
* s-tassta.adb:
(Create_Task): Take into account tasks created by foreign threads.
Code clean up: use constants instead of hard coded values.
2007-12-13 Robert Dewar <dewar@adacore.com>
* styleg.adb (Check_Comment): More liberal rules for comment placement
2007-12-13 Olivier Hainque <hainque@adacore.com>
* tb-alvms.c (struct tb_entry_t, __gnat_backtrace): Revert back to use
of Procedure Value instead of Frame Pointer as the invocation
identifier associated with the instruction pointer in each traceback
entry.
* g-trasym-vms-alpha.adb (Traceback_Entry, PV_For, FP_For,
TB_Entry_For): Revert back to use of Procedure Value instead of Frame
Pointer as the invocation identifier passed to tbk$symbolize.
* s-traent-vms.ads, s-traent-vms.adb
(Traceback_Entry, PV_For, FP_For, TB_Entry_For): Revert back to use of
Procedure Value instead of Frame Pointer as the invocation identifier
passed to tbk$symbolize.
2007-12-13 Robert Dewar <dewar@adacore.com>
* tbuild.ads, tbuild.adb:
Fix location of flag for unrecognized pragma message
2007-12-13 Robert Dewar <dewar@adacore.com>
* treepr.ads, treepr.adb: (pl): implement use of positive value
shorthands
2007-12-13 Robert Dewar <dewar@adacore.com>
* xeinfo.adb: Remove warnings
* xnmake.adb: Remove warnings
* xsinfo.adb: Remove warnings
* xtreeprs.adb: Remove warnings
* xsnames.adb: Remove warnings
* a-ngcoar.adb: Fix typo.
* s-interr.adb: Minor reformatting
* env.c: Minor reformatting.
* g-bytswa.adb: Minor reformatting.
* g-rannum.ads: Minor documentation improvements
* s-tasinf-mingw.adb: Minor header fix
* a-clrefi.adb: Minor reformatting
* g-sttsne.ads: Minor documentation improvement
* g-sttsne-locking.ads: Minor documentation improvement
* g-soliop-solaris.ads: Minor documentation improvement
* g-soliop-mingw.ads: Minor documentation improvement
* g-soliop.ads: Minor documentation improvement
* exp_aggr.ads: Minor reformatting
* debug.adb: Add documentation for the gprbuild debug flags
* exp_ch2.adb: Use Nkind_In to simplify code throughout
* exp_pakd.adb: Minor reformatting
* g-altive.ads, g-alleve.adb: Remove assertions.
Add comment about minor differences between targets regarding
floating-point operations.
* g-thread.adb: Remove pragma unreferenced.
* lib.ads: Minor reformatting
* par-ch9.adb: Minor reformatting of error messages
* sem_case.adb: Minor reformatting
* s-fileio.adb: Minor reformattinng
* s-vmexta.ads: Minor typo
* vxaddr2line.adb:
Take into account 'Success' value as per new GNAT warning.
2007-12-13 Vincent Celier <celier@adacore.com>
* a-direct.adb (Create_Path): Always take '/' as a directory separator,
even on Windows
2007-12-13 Robert Dewar <dewar@adacore.com>
Bob Duff <duff@adacore.com>
* gnat_ugn.texi: Dcoument new rules for style check comment alignment
Document that suffixes may be terminations of each others
Add doc for -gnatw.a and -gnatw.A
Document gnatbind -Wx switch
Document BOM recognition
Document pragma Implemented_By_Entry.
Document new units.
* gnat_rm.texi: (Favor_Top_Level): Document new pragma.
Add doc for pragma Unreferenced suppressing no entities referenced msg
Add documentation of GNAT.Directory_Operations.Iteration
Add documentation of GNAT.Random_Numbers
Add documentation for pragma Shared.
Correct documentation for Bit_Order
Add documentation for the Pool_Address attribute.
Fix and improve documentation of pragma machine_attribute.
New pragma Fast_Math
Document BOM recognition
* vms_data.ads: Add entries for -gnatw.a -gnatw.A
Add /Wide_Character_Encoding for binder
Add qualifier for the new gnatpp option --no-separate-loop-then
2007-12-13 Matthew Heaney <heaney@adacore.com>
* a-cohase.ads, a-cihama.ads, a-cihase.ads, a-cohama.ads: Document
which generic formal operations are called for each operation.
2007-12-13 Olivier Hainque <hainque@adacore.com>
* tb-gcc.c (uw_data_t, trace_callback): Only define if not GCC-SJLJ eh.
(__gnat_backtrace): Early return 0 if using GCC-SJLJ eh.
2007-12-13 Emmanuel Briot <briot@adacore.com>
* s-os_lib.ads, s-os_lib.adb (Normalize_Pathname): Do not compute
Reference_Dir unless we actually need it.
2007-12-13 Vasiliy Fofanov <fofanov@adacore.com>
Tristan Gingold <gingold@adacore.com>
* g-socthi-vms.ads (Fd_Set_Access): make it 32-bit.
* s-osprim-vms.adb,
a-calend-vms.adb: Remove pragma warning off and add pragma
unreferenced.
2007-12-13 Robert Dewar <dewar@adacore.com>
* impunit.adb: Add entries for missing units
* Makefile.rtl: Add new run-time units.
* Make-lang.in: Update dependencies.
2007-12-13 Bob Duff <duff@adacore.com>
* itypes.ads, itypes.adb (Create_Itype): For access-to-subprogram
types, set Can_Use_Internal_Rep appropriately, based on
Always_Compatible_Rep_On_Target.
2007-12-13 Gary Dismukes <dismukes@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* make.adb (Scan_Make_Arg): Add test for -aamp_target switch, passing
it to the front end and setting the aamp_target environment variable
to the switch's argument to ensure that gnaampbind and gnaamplink will
take the specified library into account.
(Make): Only set Check_Object_Consistency to False for JVM, not for CIL
target, since the CIL compiler supports an "object" file (.il files).
2007-12-13 Vincent Celier <celier@adacore.com>
* symbols-processing-vms-ia64.adb (Process.Skip_Half): New procedure
(Process.H): Remove variable. Replace Read_Half (H) with Skip_Half.
2007-12-13 Geert Bosch <bosch@adacore.com>
* s-parame-vxworks.adb:
Update comments to reflect usage of this package by Nucleus.
2007-12-13 Arnaud Charlet <charlet@adacore.com>
* i-vxwork.ads: Kill new warning on Convention C, since changing the
spec would break code.
* i-forbla-unimplemented.ads, vx_stack_info.c: New files.
* system-vxworks-alpha.ads: Removed.
2007-12-10 Eric Botcazou <ebotcazou@adacore.com>
* ada-tree.h (TYPE_RETURNS_BY_TARGET_PTR_P): Move around.
2007-12-09 Samuel Tardieu <sam@rfc1149.net>
PR ada/34366
* sem_ch3.adb (Designates_T): New function.
(Mentions_T): Factor reusable part of the logic into Designates_T.
Consider non-access parameters and access and non-access result.
(Check_Anonymous_Access_Components): Set ekind of anonymous access to
E_Subprogram_Type to E_Anonymous_Access_Subprogram_Type.
* einfo.ads: Update comment for E_Anonymous_Access_Subprogram_Type.
2007-12-07 Ludovic Brenta <ludovic@ludovic-brenta.org>
PR ada/34361
* mlib-tgt.adb, mlib-tgt.ads: Fix comments at the top to reflect
the new implementation of target-specific calls.
2007-12-07 Olivier Hainque <hainque@adacore.com>
* decl.c (gnat_to_gnu_entity) <case E_Access_Type>: When computing
the designated full view, only follow a second level Full_View link
for Non_Limited_Views of from_limited_with references.
2007-12-07 Samuel Tardieu <sam@rfc1149.net>
PR ada/15805
* sem_ch6.adb (Process_Formals): Prevent an access type formal
to be initialized with an access to constant object.
* sem_ch3.adb (Analyze_Object_Declaration): Signal an error
when an access to constant is used to initialize an access
value.
PR ada/21346
* a-direct.adb (Compose): Containing_Directory can be an empty string.
2007-12-07 Olivier Hainque <hainque@adacore.com>
PR ada/34173
* decl.c (gnat_to_gnu_entity) <case E_Array_Type>: When setting
the alignment on the GCC XUA array type, set TYPE_USER_ALIGN if
this is from an alignment clause on the GNAT entity.
* utils.c (create_field_decl): Rewrite the computation of DECL_ALIGN
to distinguish the case where we set it from the type's alignment.
When so, propagate TYPE_USER_ALIGN into DECL_USER_ALIGN to indicate
whether this alignment was set from an explicit alignment clause.
2007-12-06 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (make_packable_type): Revert last change.
(gnat_to_gnu_field): Avoid setting size and position multiple times.
* utils.c (finish_record_type): Retrieve the real name of the type.
2007-12-05 Eric Botcazou <ebotcazou@adacore.com>
* trans.c (lvalue_required_p): Take base node directly instead
of its parent. Rename second parameter to 'gnu_type'.
<N_Indexed_Component>: Return 0 if the node isn't the prefix.
<N_Slice>: Likewise.
(Identifier_to_gnu): Rename parent_requires_lvalue to require_lvalue.
Adjust calls to lvalue_required_p.
2007-12-05 Samuel Tardieu <sam@rfc1149.net>
PR ada/21489
* exp_ch9.adb (Build_Simple_Entry_Call): Initialize OUT access type
parameters of an entry call.
2007-12-03 Robert Dewar <dewar@adacore.com>
Samuel Tardieu <sam@rfc1149.net>
PR ada/34287
* sem_util.adb (Safe_To_Capture_Value): Do not capture values
of variables declared in a library-level package.
2007-12-02 Samuel Tardieu <sam@rfc1149.net>
* clean.adb (Clean_Library_Directory): Use Empty_String'Access intead
of Empty_String'Unchecked_Access.
* Makefile.in: Add support for sh4-linux.
* system-linux-sh4.ads: New file.
2007-12-01 Kostik Belousov <kostikbel@ukr.net>
PR ada/33722
* env.c (__gnat_setenv): FreeBSD 7 has a POSIX conformant putenv()
and its argument must not be free()ed.
2007-11-29 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (make_packable_type): Retrieve the real name of the type.
(maybe_pad_type): Simplify similar code.
2007-11-28 Samuel Tardieu <sam@rfc1149.net>
PR ada/15804
* par-ch3.adb (P_Variant_Part): Signal an error when anything other
than an identifier is used after "case" in a variant_part.
PR ada/17318
* par-ch4.adb (Is_Parameterless_Attribute): New map.
(P_Name, Scan_Apostrophe block): Parse left parenthesis following
attribute name or not depending on the new map.
* sem-attr.adb (Analyze_Attribute): Parameterless attributes
returning a string or a type will not be called with improper
arguments.
* sem-attr.ads (Attribute_Class_Array): Move to snames.ads.
* snames.ads (Attribute_Class_Array): Moved from sem-attr.ads.
PR ada/32792
* sem_attr.adb (Analyze_Attribute, Attribute_Integer_Value clause):
Signal an error when attribute argument is a fixed-point value of
an unknown type.
PR ada/22559
* sem_ch3.adb (Build_Derived_Numeric_Type): Do not set RM_Size on
a derived ordinary fixed point type.
* sem_ch13.adb (Analyze_Attribute_Definition_Clause): Recompute
RM_Size when a Small clause is found.
2007-11-26 Andreas Krebbel <krebbel1@de.ibm.com>
PR 34081/C++
* trans.c (Subprogram_Body_to_gnu, Compilation_Unit_to_gnu):
Pass 'false' for the new allocate_struct_function parameter.
* utils.c (build_function_stub): Likewise.
2007-11-25 Richard Guenther <rguenther@suse.de>
* utils.c (gnat_pushlevel): Use BLOCK_CHAIN.
(gnat_poplevel): Likewise.
2007-11-25 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (gnat_to_gnu_entity) <E_Record_Type>: If the type has
strict alignment, no alignment clause and a known static size, cap
the type alignment to the greatest power of 2 factor of the size.
(gnat_to_gnu_field): If the field has a component clause, is aliased
or of a type with strict alignment, require that its size be equal to
that of the type.
(validate_size): Use the type size as the minimum size for a type with
strict alignment.
2007-11-23 Samuel Tardieu <sam@rfc1149.net>
* s-inmaop-posix.adb, s-intman-vxworks.adb, s-taprop-hpux-dce.adb,
s-taprop-irix.adb, s-taprop-linux.adb, s-taprop-lynxos.adb,
s-taprop-posix.adb, s-taprop-tru64.adb, s-taprop-vxworks.adb:
Use 'Access instead of 'Unchecked_Access in second and third
arguments of pthread_sigmask.
2007-11-23 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (ceil_alignment): New function.
(gnat_to_gnu_entity): Use it to set the alignment on atomic types.
(make_packable_type): Likewise.
2007-11-22 Olivier Hainque <hainque@adacore.com>
* trans.c (gnat_to_gnu) <case N_Free_Statement>: Reformat lines
to fit in 80 columns.
2007-11-21 Aurelien Jarno <aurelien@aurel32.net>
* s-osinte-kfreebsd-gnu.ads (To_Target_Priority): New function.
* Makefile.in: Add EH_MECHANISM=-gcc to kfreebsd-gnu. Remove SYMLIB.
2007-11-19 Eric Botcazou <ebotcazou@adacore.com>
PR ada/34098
* misc.c (gnat_adjust_rli): Delete.
(gnat_init): Do not initialize the translation code here.
Do not call set_lang_adjust_rli.
* trans.c (init_code_table): Make static.
(gnat_init_stmt_group): Delete.
(gigi): Initialize the translation code entirely here.
Emit debug info for the common types here instead of...
* utils.c (gnat_init_decl_processing): ...here.
* gigi.h (init_code_table): Delete.
(gnat_init_stmt_group): Likewise.
2007-11-16 Olivier Hainque <hainque@adacore.com>
* utils2.c (build_call_alloc_dealloc) <if gnu_obj>: Move the code
retrieving an allocator return value from a super-aligned address from
here to ...
* trans.c (gnat_to_gnu) <case N_Free_Statement>: ... here, and don't
expect a super-aligned address for a fat or thin pointer.
2007-11-14 Eric Botcazou <ebotcazou@adacore.com>
* trans.c (call_to_gnu): Always set the source location on the call
expression. If the function returns-by-target, also set it on the
address expression.
2007-11-14 Samuel Tardieu <sam@rfc1149.net>
* adaint.c, init.c, initialize.c, link.c: Remove system-specific
sections of non-supported Interix target.
* s-osinte-interix.ads: Removed.
* i-cstrin.ads (chars_ptr): Make it a C convention type.
2007-11-13 Samuel Tardieu <sam@rfc1149.net>
* a-tasatt.adb: Add a comment at the beginning of the package
explaining why in general 'Unchecked_Access must be used instead
of 'Access.
* sem_prag.adb (Process_Convention): Move the test for the
entity on which the Convention pragma applies down to also
forbid pragma Convention on enumeration literals reached
through renamings.
2007-11-10 Samuel Tardieu <sam@rfc1149.net>
* a-tasatt.adb: Revert previous change for this file as it will
generate an error when this package is instantiated from a
local context.
2007-11-07 Samuel Tardieu <sam@rfc1149.net>
* a-tasatt.adb: Type Wrapper should be declared in comment instead
of already declared type Node_Access.
Use 'Access instead of 'Unchecked_Access when applicable. Local
lifetime is the one of the package.
(Set_Value): W is allocated on the heap.
* g-socket.adb: Use 'Access instead of 'Unchecked_Access when
applicable.
(Get_Socket_Option): Optlen formal of C_Getsockopt is of an anonymous
access type.
(Receive_Socket): Fromlen formal of C_Recvfrom is of an anonymous
access type.
* s-taasde.adb: Use 'Access instead of 'Unchecked_Access when
applicable.
(elaboration code): Timer_Queue lifetime is the one of the
package.
* tracebak.c (i386 alternative): Remove useless comparaison
which is always false; LOWEST_ADDRESS is 0 and is never greater
than an unsigned integer.
* sem_attr.adb (Analyze_Attribute): Remove duplicate identical
embedded check for "Ada_Version >= Ada_05".
2007-11-07 Olivier Hainque <hainque@adacore.com>
* decl.c (make_aligning_type): Set the mode of the RECORD_TYPE we
craft and expand comment.
2007-11-01 Eric Botcazou <ebotcazou@adacore.com>
* lang-specs.h: Move translation of -fRTS= after -gnatez switch.
2007-10-23 Eric Botcazou <ebotcazou@adacore.com>
* misc.c (gnat_handle_option): Replace call to abort with
call to gcc_unreachable.
(gnat_init): Likewise.
(gnat_expand_expr): Likewise.
(fp_prec_to_size): Likewise.
(fp_size_to_prec): Likewise.
2007-10-23 Richard Guenther <rguenther@suse.de>
PR bootstrap/33608
* tracebak.c: #undef abort after including system.h.
2007-10-20 Danny Smith <dannysmith@users.sourceforge.net>
* Makefile.in (LIBGNAT_TARGET_PAIRS) Add s-tasinf-mingw.adb,
s-tasinf-mingw.ads, a-exetim-mingw.adb, a-exetim-mingw.ads
for win32 targets.
(EXTRA_GNATRTL_TASKING_OBJS): Add a-exetim.o for win32 targets.
2007-10-15 Eric Botcazou <ebotcazou@adacore.com>
* s-osinte-tru64.adb: (Hide_Yellow_Zone): Add On parameter.
Set the protection status of the guard page based on the value of On.
* s-osinte-tru64.ads: (Hide_Yellow_Zone): Add On parameter.
* s-taprop-tru64.adb: (Enter_Task): Pass True to Hide_Yellow_Zone.
(Exit_Task): Pass False to Hide_Yellow_Zone.
2007-10-15 Robert Dewar <dewar@adacore.com>
* s-taprop-solaris.adb, s-taprop-vms.adb, s-taprop-mingw.adb,
s-taprop-vxworks.adb, s-taprop-posix.adb, a-calend-vms.adb,
a-calend.adb, a-nuflra.adb, a-tigeau.adb, a-wtgeau.adb,
checks.adb, bindgen.adb, eval_fat.adb, exp_fixd.adb, fmap.adb,
freeze.adb, g-awk.adb, g-calend.adb, g-diopit.adb, g-expect.adb,
gnatchop.adb, gnatlink.adb, g-spipat.adb, g-thread.adb, make.adb,
mdll.adb, mlib.adb, mlib-prj.adb, osint.adb, par-ch3.adb, prj.adb,
prj-makr.adb, sem_prag.adb, sem_type.adb, s-fatgen.adb, s-fileio.adb,
sinfo.ads, sinput-d.adb, s-taasde.adb, s-tasdeb.ads, s-tasren.adb,
s-tassta.adb, s-tpobop.adb, s-tposen.adb, stylesw.adb, types.ads,
uintp.adb, validsw.adb, makegpr.adb, a-rbtgso.adb, a-crbtgo.adb,
a-coorse.adb, a-convec.adb, a-coinve.adb, a-cohama.adb, a-ciorse.adb,
a-cihama.adb, a-cidlli.adb, a-chtgop.adb, a-cdlili.adb, a-cdlili.adb,
a-coormu.adb, a-ciormu.adb, a-cihase.adb, a-cohase.adb, a-ciorma.adb,
a-coorma.adb, a-ztgeau.adb, symbols-vms.adb, a-crdlli.adb,
a-calari.adb, a-calfor.adb, s-os_lib.adb, s-regpat.adb, a-ngrear.adb:
Minor reformatting.
Add Unreferenced and Warnings (Off) pragmas for cases of
variables modified calls where they are IN OUT or OUT parameters and
the resulting values are not subsequently referenced. In a few cases,
we also remove redundant code found by the new warnings.
* ug_words, vms_data.ads, usage.adb, sem_util.adb, sem_util.ads,
sem_warn.adb, sem_warn.ads, sem_res.adb, sem_ch7.adb, sem_ch8.adb,
sem_ch5.adb, opt.ads, lib-xref.adb, lib-xref.ads, exp_smem.adb,
sem_ch11.adb, exp_ch6.adb, einfo.ads, einfo.adb: implement a new
warning controlled by -gnatw.o that warns on cases of out parameter
values being ignored.
2007-10-15 Geert Bosch <bosch@adacore.com>
* adaint.c, socket.c, cal.c: Initial port to arm-mentor-nucleus.
* expect.c: Initial port to arm-mentor-nucleus.
Use kill for __gnat_kill() on VMS.
2007-10-15 Emmanuel Briot <briot@adacore.com>
* ali.ads, ali.adb (Scan_ALI): Initialize XE.Tref to a known default
value.
(Xref_Record): Change type for Line, since in the case of a reference to
a predefined entity (as happens for array index types), the line is set
to 0.
Add support for parsing multiple array index types info, or
multiple inherited interfaces info. This information cannot be stored
in Xref_Entity_Record, which only supports a single instance of Tref_*,
and is therefore stored in the list of references instead. It has a
special treatement later on in tools that use this information.
2007-10-15 Tristan Gingold <gingold@adacore.com>
* debug.adb: Document use of -gnatd.a and -gnatd.I
* layout.adb: On OpenVMS -gnatd.a disables alignment optimization.
2007-10-15 Javier Miranda <miranda@adacore.com>
* exp_attr.adb (Expand_N_Attribute_Reference): Case Access,
Unchecked_Access, and Unrestricted_Access. Cleanup code that takes
care of access to class-wide interface types plus removal of bizarre
conversion of tagged object to access type (reported by Gary
Dismukes). After this patch there is no need to perform any
additional management on these nodes in Expand_Interface_Actuals.
* exp_disp.adb (Expand_Interface_Actuals): Code cleanup. Remove code
that handles use of 'Access and 'Unchecked_Access applied to
actuals covering interface types. Such code is now
centralized in Expand_N_Attribute_Reference.
2007-10-15 Ed Schonberg <schonberg@adacore.com>
* exp_ch3.adb (Build_Init_Procedure): Keep separate the initialization
of tagged types whose ultimate ancestor is a CPP type.
(Freeze_Array_Type): For a packed array type, generate an initialization
procedure if the type is public, to handle properly a client that
specifies Normalize_Scalars.
2007-10-15 Hristian Kirtchev <kirtchev@adacore.com>
* exp_ch9.adb (Actual_Index_Expression): When the expansion occurs
inside a generic body, retrieve the full view of the entry family
discrete subtype if available.
2007-10-15 Thomas Quinot <quinot@adacore.com>
* exp_dist.adb (Add_RACW_Primitive_Declarations_And_Bodies): Do not
attempt to generate stubs for hidden primitive operations.
2007-10-15 Vincent Celier <celier@adacore.com>
* mlib-tgt-specific.adb (Support_For_Libraries): New function,
returning None, used when there is no platform specific body for
MLib.Tgt.Specific.
2007-10-15 Bob Duff <duff@adacore.com>
* sem_case.adb, sem_ch13.adb, lib-sort.adb: Replace use of Heap_Sort_A
(passing'Unrestricted_Access of nested subprograms to Sort) with use of
the generic Heap_Sort_G, in order to avoid trampolines.
2007-10-15 Vasiliy Fofanov <fofanov@adacore.com>
Jose Ruiz <ruiz@adacore.com>
* vx_stack_info.c: New file.
* i-forbla-unimplemented.ads: New file.
* Makefile.in: i-forbla-unimplemented.ads: a variant of i-forbla.ads
for unsupported configurations; use it on VMS targets instead of the
real one.
(EXTRA_LIBGNAT_SRCS,EXTRA_LIBGNAT_OBJS for VxWorks): Include
vx_stack_info.{c,o} that contains the routine __gnat_get_stack_info
used by VxWorks targets to have access to task-specific data and be
able to extract the stack boundaries for stack checking.
Use system-vms-ia64.ads on ivms.
* Make-lang.in: Update dependencies.
* sysdep.c (__gnat_get_stack_info): Move to a standalone file
(vx_stack_info.c).
2007-10-15 Vincent Celier <celier@adacore.com>
* snames.adb, snames.ads: Add new standard name runtime_library_dir
* prj.ads (Language_Config): Add new component Runtime_Library_Dir
* prj-attr.adb: Add project level attribute Runtime_Library_Dir
* prj-env.adb (Create_Mapping_File): Do not put an entry if the path of
the source is unknown.
* prj-ext.adb: Spelling error fix
* prj-nmsc.adb (Check_Ada_Name): Reject any unit that includes an Ada
95 reserved word in its name.
(Process_Project_Level_Array_Attributes): Process new attribute
Runtime_Library_Dir.
* prj-part.adb (Parse_Single_Project): Do not check the name of the
config project against the user project names.
* prj-proc.adb (Expression): In multi-language mode, indexes that do
not include a dot are always case insensitive.
(Process_Declarative_Items): Ditto
(Process_Project_Tree_Phase_1): Set Success to False in case an error is
detected.
* prj-util.adb (Value_Of (In_Array)): When Force_Lower_Case_Index is
True, compare both indexes in lower case.
2007-10-15 Robert Dewar <dewar@adacore.com>
* rtsfind.adb: (Load_RTU): Turn off style checks for Load call
2007-10-15 Gary Dismukes <dismukes@adacore.com>
* sem_aggr.adb (Resolve_Record_Aggregate): In the case of a box
association for an access component, add an association with null as
the expression. Remove testing for array subtypes and the setting in
that case of Ctyp to the array component type, which prevented proper
inclusion of an association for null-initialized arrays. Collapse
condition that tests for array subtypes into just a test of
Is_Partially_Initialized_Type (which already covers arrays anyway).
2007-10-15 Hristian Kirtchev <kirtchev@adacore.com>
* sem_ch12.adb: Minor code reformatting.
(Check_Generic_Child_Unit): Iterate over the homonym chain in order to
find the parent package which may have been hidden by local
declarations.
2007-10-15 Gary Dismukes <dismukes@adacore.com>
* sem_ch3.adb (Build_Derived_Concurrent_Type): Set the Is_Constrained
flag of derived concurrent types, taking into account the flag setting
on the parent subtype and any new set of discriminants.
2007-10-15 Hristian Kirtchev <kirtchev@adacore.com>
* sem_ch4.adb: Minor code and comment reformatting.
(Analyze_Allocator): When the designated type of an unconstrained
allocator is a record with unknown discriminants or an array with
unknown range bounds, emit a detailed error message depending on the
compilation mode and whether the designated type is limited.
2007-10-15 Tristan Gingold <gingold@adacore.com>
* system-vms-ia64.ads: New file.
* system-vms_64.ads: Minor comment fix.
2007-10-15 Ed Schonberg <schonberg@adacore.com>
* sem_ch6.adb (Find_Corresponding_Spec): If the previous entity is a
body generated for a function with a controlling result that is a null
extension, discard the generated body in favor of the current explicit
one.
2007-10-15 Ed Schonberg <schonberg@adacore.com>
* sem_disp.adb (Find_Controlling_Arg): Examine the call node before
examining its original form, to handle properly operator calls that
have been rewritten.
2007-10-15 Olivier Hainque <hainque@adacore.com>
* tb-alvms.c (tb_entry_t, __gnat_backtrace): Store a frame pointer
instead of a procedure value in each traceback entry.
* g-trasym-vms-alpha.adb (Symbolic_Traceback): Pass frame pointer
instead of procedure value to TBK$SYMBOLIZE.
* s-traent-vms.adb (PV_For): Rename as FP_For and access the proper
field.
(TB_Entry_For): Account for the PV/FP renaming.
* s-traent-vms.ads (Traceback_Entry): Rename PV component into FP and
add comment.
(Null_TB_Entry): Account for change of component name.
(PV_For): Rename as FP_For.
2007-10-15 Tristan Gingold <gingold@adacore.com>
* trans.c (gnat_to_gnu): Remove the padding structure more often.
This optimize assignment to over-aligned record.
2007-10-15 Emmanuel Briot <briot@adacore.com>
* xref_lib.adb (Get_Full_Type): Add support for the 'h' entity type, ie
interfaces.
* xr_tabls.adb (Add_Reference): Add support for the new 'R' reference
type, for dispatching calls.
2007-10-15 Vincent Celier <celier@adacore.com>
Robert Dewar <dewar@adacore.com>
* gnat_ugn.texi: Add documentation for switches --version and --help
for the GNAT tools gnatbind, gnatlink, gnatmake, gnatchop, gnatname,
gnatxref, gnatfind, gnatls, and gnatclean.
Document -gnatw.o.
Mention attribute Excluded_Source_Dirs
Replace obsolescent attribute Locally_Removed_Files with attribute
Excluded_Source_Files.
Improve documentation of -u (gnatbind)
Document how to do reliable stack checking for the environmental task
on iVMS.
* gnat_rm.texi: Rewrite section about No_Implicit_Dynamic_Code.
Document attribute Excluded_Source_Files and indicate that attribute
Locally_Removed_Files is obsolescent.
2007-10-15 Thomas Quinot <quinot@adacore.com>
* g-soccon-vms.ads: Fix value of MSG_WAITALL.
* gen-soccon.c:
Update documentation to note that OpenVMS 8.3 or later must be used
to generate g-soccon-vms.ads.
* atree.adb: Add ??? comment
* exp_util.adb: Minor reformatting.
Add ??? comment in Kill_Dead_Code.
2007-10-15 Robert Dewar <dewar@adacore.com>
* errout.ads: Comment clarification
* exp_ch4.adb (Expand_N_Allocator): Code cleanup.
(Expand_N_Op_Eq): Improve handling of array equality with -gnatVa
* lib.ads: Comment update
* init.c: Minor reformatting.
* sem_attr.adb: Minor formatting
* osint-b.ads: Minor reformatting
* sem_ch9.adb: Implement -gnatd.I switch
* g-comlin.adb: (Start): Fix handling of empty command line.
* gnatcmd.adb (GNATCmd): Do not put the -rules in the -cargs section,
even when -rules follows the -cargs section.
2007-10-08 Ollie Wild <aaw@google.com>
* misc.c (LANG_HOOKS_PUSHDECL): Replaced lhd_return_tree with
gnat_return_tree.
(gnat_init_gcc_eh): Replaced gnat_eh_runtime_type with
gnat_return_tree.
(gnat_eh_runtime_type): Removed.
(gnat_return_tree): New function.
2007-10-08 Ben Elliston <bje@au.ibm.com>
PR ada/33454
Revert:
2007-08-31 Ben Elliston <bje@au.ibm.com>
* Makefile.in (LIBGNAT_TARGET_PAIRS): Use system-linux-ppc64.ads
when compiling for powerpc64-*-linux.
* system-linux-ppc64.ads: New file.
2007-09-27 Eric Botcazou <ebotcazou@adacore.com>
Mapped location support
* back_end.adb (Call_Back_End): Pass information about source
files instead of units to gigi.
* gigi.h (struct File_Info_Type): New.
(gigi): Rename and change type of number_units parameter, change
type of file_info_ptr parameter.
* trans.c (number_files): New global variable.
(gigi): Rename and change type of number_units parameter, change
type of file_info_ptr parameter.
If mapped location support is enabled, create the isomorphic mapping
between source files and line maps.
(Sloc_to_locus): If mapped location support is enabled, translate
source location into mapped location.
(annotate_with_node): Rename into set_expr_location_from_node.
Call set_expr_location instead of annotate_with_locus.
(Pragma_to_gnu): Adjust for above change.
(Loop_Statement_to_gnu): Likewise.
(call_to_gnu): Likewise.
(Handled_Sequence_Of_Statements_to_gnu): Likewise.
(gnat_to_gnu): Likewise.
(add_stmt_with_node): Likewise.
(add_cleanup): Likewise.
* utils.c (gnat_init_decl_processing): Do not set input_line.
2007-09-26 Hristian Kirtchev <kirtchev@adacore.com>
* sem_ch8.adb (Analyze_Use_Type): Code cleanup.
(Applicable_Use): Emit a warning when a package tries to use itself.
(Use_One_Type): Add variable Is_Known_Used. Emit a warning when a type
is already in use or the package where it is declared is in use or is
declared in the current package.
(Spec_Reloaded_For_Body): New subsidiary routine for Use_One_Type.
* a-tasatt.adb, s-osprim-vxworks.adb, g-socthi-mingw.adb,
s-intman-vms.adb, g-socket.adb, g-thread.adb, s-tarest.adb,
s-tassta.adb, s-tporft.adb: Remove redundant 'use type' clause.
2007-09-26 Hristian Kirtchev <kirtchev@adacore.com>
* a-calend-vms.adb, a-calend.adb:
Add a section on leap seconds control along with two entities used to
enable and disable leap seconds support. The array Leap_Second_Times is
now constant and contains hard time values pre-generated. Remove
all elaboration code used to populate the table of leap seconds.
* bindgen.adb:
Add entity Leap_Seconds_Support to the list of global run-time variables
along with a comment on its usage and values.
(Gen_Adainit_Ada): Add code to generate the declaration and import of
Integer variable Leap_Seconds_Support. Set its value to zero (disabled)
or one (enabled) depending on the presence of binder switch "-y".
(Gen_Adainit_C): Add code to generate the declaration of external int
__gl_leap_seconds_support. Set is value to zero (disabled) or one
(enabled) depending on the presence of binder switch "-y".
* init.c: Add __gl_leap_seconds_support to the list of global values
computed by the binder.
2007-09-26 Jerome Guitton <guitton@adacore.com>
* s-taprop-lynxos.adb, s-taprop-tru64.adb, s-taprop-irix.adb,
s-taprop-hpux-dce.adb, s-taprop-linux.adb, s-taprop-dummy.adb,
s-taprop-solaris.adb, s-taprop-vms.adb, s-taprop-mingw.adb,
s-taprop-posix.adb (Stop_Task): New function, dummy implementation.
* s-taprop.ads, s-taprop-vxworks.adb (Stop_Task): New function.
* s-tasdeb.adb (Stop_All_Tasks): New function, implementing a run-time
function which can be called by the debugger to interrupt the tasks of
an Ada application asynchronously, as needed on VxWorks.
(Stop_All_Tasks_Handler): Renamed from Stop_All_Tasks.
* s-tasdeb.ads (Stop_All_Tasks_Handler): New function declaration,
renamed from Stop_All_Tasks. Update comments.
(Stop_All_tasks): New function declaration.
2007-09-26 Olivier Hainque <hainque@adacore.com>
* adaint.c (if defined (__Lynx__)): Wrap #def/#undef VMOS_DEV around
#include <utime.h> and #define GCC_RESOURCE_H before
#include <sys/wait.h>.
Add more protections in __gnat_translate_vms.
* expect.c (if defined (__Lynx__)): #define GCC_RESOURCE_H before
#include <sys/wait.h>.
2007-09-26 Thomas Quinot <quinot@adacore.com>
Sergey Rybin <rybin@adacore.com>
* gnatvsn.ads (PCS_Version_Number, ASIS_Version_Number): Removed.
* exp_dist.ads (PCS_Version_Number): Move from Gnatvsn to Exp_Dist,
where it belongs.
* opt.ads: Move ASIS_Version_Number from Gnatvsn into Tree_IO.
* rtsfind.adb (PCS_Version_Number): Move from Gnatvsn to Exp_Dist,
where it belongs.
* sem_dist.ads: Minor comment fix
* tree_io.ads: Move ASIS_Version_Number from Gnatvsn into Tree_IO.
2007-09-26 Javier Miranda <miranda@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* a-tags.adb:
(Get_HT_Link/Set_HT_Link): Updated to handle the additional level of
indirection added to the HT_Link component of the TSD. This is required
to statically allocate the TSD.
* a-tags.ads:
Minor reordering of the declarations in the private part. Required to
add a level of indirection to the contents of the TSD component HT_Link.
This is required to statically allocate the TSD.
* decl.c (gnat_to_gnu_entity) <object>: Do not exclude objects with
Is_Statically_Allocated set from constant objects.
Do not make exported constants created by the compiler volatile.
(gnat_to_gnu_param): Do not treat an IN parameter whose address is taken
as read-only.
* trans.c (Identifier_to_gnu): For constants, unshare initializers
before returning them.
* exp_disp.ads, exp_disp.adb (Building_Static_DT): Spec moved to the
public part of the package.
(Make_DT): Move HT_Link component out of the TSD record. For this
purpose Make_DT now declares a separate object that stores the
HT_Link value, and initializes the TSD component with the address
of this new object. The addition of this level of indirection is
required to statically allocate the TSD because the TSD cannot
have variable components.
(Expand_Interface_Conversion): Improve the expanded code.
(Expand_Interface_Thunk): Set Is_Thunk in the thunk entity.
* sem_disp.adb (Check_Dispatching_Operation): In case of a body
declaring a primitive operation ---allowed by RM 3.9.2 (13.e/2)---,
if we are building static dispatch tables then we must not generate
extra code to register the primitive because the dispatch table will
be built at the end of the library package; otherwise we notify that
we cannot build the static dispatch table.
2007-09-26 Robert Dewar <dewar@adacore.com>
* checks.adb, gnat1drv.adb, sem_util.ads: Improve warnings for address
overlays.
* sem_ch13.ads, sem_ch13.adb: Improve warnings for address overlays
(Analyze_Record_Representation_Clause): Suppress junk warning for
missing component clause.
(Analyze_Attribute_Definition_Clause, case Address): Apply the special
tests for controlled type overlay to composites with controlled
components.
(Analyze_Record_Representation_Clause): Add reference for component name
2007-09-26 Javier Miranda <miranda@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* einfo.adb (Is_Thunk): New attribute applicable to subprograms. True
for thunks associated with interface types.
* einfo.ads: Improve documentatation of Is_Internal
(Is_Thunk): New attribute applicable to subprograms. True for thunks
associated with interface types.
Extensive comment fixes regarding flags that appear in all entities. The
documentation is now consistent for all such flags (there were a number
of errors in the documentation in this regard).
* exp_attr.adb (Expand_N_Attribute_Reference): Minor code cleanup.
* exp_ch6.adb (Make_Build_In_Place_Call_*): Return immediately if any
of these procedures are passed a function call that already has
build-in-place actuals (testing new flag
Is_Expanded_Build_In_Place_Call). Set the flag on the function call in
the case where processing continues.
(Expand_Call): If the call is generated from a thunk body then we
propagate the extra actuals associated with the accessibility
level of the access type actuals.
* sem_ch6.adb (Analyze_Subprogram_Body): Set the Protected_Formal field
of each extra formal of a protected operation to reference the
corresponding extra formal of the subprogram denoted by the
operation's Protected_Body_Subprogram.
* sinfo.ads, sinfo.adb (Is_Expanded_Build_In_Place_Call): New flag on
N_Function_Call nodes.
2007-09-26 Robert Dewar <dewar@adacore.com>
* exp_ch5.adb: Activate memmove type processing if debug flag d.s is set
* debug.adb: Add d.s flag.
2007-09-26 Gary Dismukes <dismukes@adacore.com>
* exp_dbug.adb (Debug_Renaming_Declaration): Set Is_Internal on the
debug variable so that it won't be initialized when pragma
Initialize_Scalars is in effect.
2007-09-26 Gary Dismukes <dismukes@adacore.com>
* freeze.adb (Freeze_Entity): Remove check for preelaborable
initialization of a full view. This is moved to
Analyze_Package_Specification.
* sem_ch7.adb (Analyze_Package_Specification): Add check for
preelaborable initialization of a full view in entity loop.
(Uninstall_Declarations): If entity is a use-visible compilation unit,
its child units are use-visible only if they are visible child units.
* sem_util.adb (Is_Preelaborable_Expression): New function to determine
whether an expression can be used within a type declaration that
requires preelaborable init.
(Check_Components): Replace inline code that does partial checking for
preelaborable default expressions with call to
Is_Preelaborable_Expression.
(Has_Preelaborable_Initialization): In the case of a generic actual
subtype, (that is, Is_Generic_Actual is True), return the result of
applying Has_Preelaborable_Initialization to the generic actual's base
type.
2007-09-26 Hristian Kirtchev <kirtchev@adacore.com>
* g-calend.adb (Has_53_Weeks): Rename to Last_Year_Has_53_Weeks. Add a
call to Jan_1_Day _Of_Week to optimize its performance.
(Is_Leap): Move the routine to the scope of Week_In_Year.
(Jan_1_Day_Of_Week): New routine in Week_In_Year which calculates the
weekday on which January 1 falls of Year - 1 and Year + 1. This function
avoids calling Time_Of and Split, thus making it more efficent.
(Week_In_Year): Reimplemented in oder to follow ISO 8601.
* g-calend.ads (Week_In_Year): Change comment to reflect new
implementation.
2007-09-26 Emmanuel Briot <briot@adacore.com>
* g-comlin.ads, g-comlin.adb (Command_Line_Configuration,
Command_Line): New types
(Define_Alias, Define_Prefix, Free): New subprograms. These provide
support for defining how switches can be grouped on a command line (as
is the case for -gnatw... for GNAT), and how simple switches can be
used as aliases for more complex switches (-gnatwa is same as
-gnatwbcef...)
(Set_Command_Line, Add_Switch, Remove_Switch): New subprogram
(Start, Current_*): New subprograms
Added support for parsing an array of strings in addition to the real
command line.
(Opt_Parser, Opt_Parser_Data): New type. As a result, some types had to
be moved from the body to the private part of the spec.
(*): All subprograms now have an extra parameter with default value to
specify which parser should be used. For backward compatibility, it
defaults to parsing the command line of the application. They were also
modified to properly handle cases where each of the argument does not
start at index 1 (which is always true for Ada.Command_Line, but not
when processing any Argument_List).
(Free): New subprogram
(Internal_Initialize_Option_Scan, Find_Longuest_Matching_Switch,
Argument): New subprograms
(Switch_Parameter_Type): New enum, which clarifies the code. The extra
special characters like ':', '=',... are now handled in a single place,
which makes the code more extensible eventually.
(Getopt, Full_Switch): When the switch was returned as part of the
special character '*', make sure it is prepended by the switch character
('-' in general), so that the application knows whether "foo" or "-foo"
was specified on the command line.
2007-09-26 Florian Villoing <villoing@adacore.com>
* g-dirope.adb (Remove_Dir): In case we are removing directories
recursively, make sure that if an exception is raised during the
processing, the current working directory is reset to its initial
value before propagating the exception.
2007-09-26 Vincent Celier <celier@adacore.com>
* gnatbind.adb: If there are several ALI files specified and there is
a main program to bind, the first ALI is expected to contain the main
subprogram and the names of the binder generated files will be derived
from the first ALI file name.
(Gnatbind): Fix insertion character in invocation of Error_Msg
2007-09-26 Vincent Celier <celier@adacore.com>
* gnatcmd.adb (Check_Files): Do not include sources that have been
removed by attributes Exclude_Source_Files or Locally_Removed_Files.
2007-09-26 Ed Schonberg <schonberg@adacore.com>
* lib-xref.ads, lib-xref.adb: The entry for array types now carries
information about each of its index types, following the type
reference for its component type.
2007-09-26 Vincent Celier <celier@adacore.com>
* make.adb: (Kill): New procedure (__gnat_kill imported)
(Running_Compile, Outstanding_Compiles): Global variables that
were previously local to procedure Compile_Sources.
(Sigint_Intercepted): Send signal SIGINT to all outstanding
compilation processes.
(Gnatmake): If project files are used, create the mapping of all the
sources, so that the correct paths will be found.
* prj-env.ads, prj-env.adb (Create_Mapping): New procedure
2007-09-26 Vincent Celier <celier@adacore.com>
* makeutl.ads (Main_Config_Project): Moved to gpr_util.ads
* prj.ads, prj.adb (Default_Language): Remove function, no longer used
Replace components Compiler_Min_Options and Binder_Min_Options with
Compiler_Required_Switches and Binder_Required_Switches in record
Language_Config.
Remove components Default_Language and Config in Project_Tree_Data,
no longer used.
* prj-attr.adb: New attributes Required_Switches (<language>) in
packages Compiler and Binder.
* prj-nmsc.adb: Major rewrite of the processing of configuration
attributes for gprbuild. No impact on GNAT tools.
* prj-proc.ads, prj-proc.adb (Process_Project_Tree_Phase_2): No longer
process configuration attributes: this is done in Prj.Nmsc.Check.
(Recursive_Process): Make a full copy of packages inherited from project
being extended, instead of a shallow copy.
(Process_Project_Tree_Phase_1): New procedure
(Process_Project_Tree_Phase_1): New procedure
(Process): Implementation now uses the two new procedures
* prj-util.adb (Executable_Of): Get the suffix and the default suffix
from the project config, not the tree config that no longer exists.
2007-09-26 Vincent Celier <celier@adacore.com>
* Make-lang.in: Update dependencies..
2007-09-26 Vincent Celier <celier@adacore.com>
* osint.adb, osint.ads: Minor reformatting
* osint-b.adb, osint-b.ads (Set_Current_File_Name_Index): New procedure
2007-09-26 Gary Dismukes <dismukes@adacore.com>
* par-ch4.adb (P_Record_Or_Array_Component_Association): Change Ada 95
message to cite use of <> in aggregate component associations rather
than wrongly indicating use of limited aggregates.
2007-09-26 Robert Dewar <dewar@adacore.com>
* sem_attr.adb (Analyze_Access_Attribute): Fix missing set of
Address_Taken.
2007-09-26 Ed Schonberg <schonberg@adacore.com>
* sem_ch3.adb (Derive_Subprograms): If the interface parent is a direct
ancestor of the derived type, the operations are inherited from the
primary dispatch table of the parent.
(OK_For_Limited_Init_In_05): Remove old comment. Reject in-place calls
when the context is an explicit type conversion.
2007-09-26 Ed Schonberg <schonberg@adacore.com>
* sem_ch4.adb (Analyze_Qualified_Expression): Apply name resolution
rule for qualified expressions properly, to detect improper conversions
and resolve some cases of overloading.
2007-09-26 Ed Schonberg <schonberg@adacore.com>
* sem_res.adb (Resolve_Call): If the call is dispatching, generate the
proper kind of reference to the primitive operation, for better source
navigation.
(Valid_Conversion): A tagged conversion is legal if both operands are
tagged.
2007-09-26 Robert Dewar <dewar@adacore.com>
* sem_warn.adb (Check_References): Catch more cases of unreferenced
packages.
2007-09-26 Vincent Celier <celier@adacore.com>
* snames.adb, snames.ads: Change Include_Option to Include_Switches
2007-09-26 Robert Dewar <dewar@adacore.com>
* s-wchstw.adb: provide messages for run time unit exceptions
* a-witeio.adb: Minor reformatting
* exp_ch13.adb: Minor reformatting
2007-09-26 Sergey Rybin <rybin@adacore.com>
* vms_data.ads: Revise gnatmetric qualifiers.
Add qualified for the new gnatbind option '-y'
* gnat_ugn.texi: Revise the gnatmetric section.
Add entry for new gnatbind option '-y'.
* gnat_rm.texi: Minor spelling correction.
Document restriction on overlaying controlled types
2007-09-26 Vincent Celier <celier@adacore.com>
* makegpr.adb (Link_Executables): Do not fail when the root project has
no sources, but is an extending project.
2007-09-25 Eric Botcazou <ebotcazou@adacore.com>
* trans.c: Fix misplaced #define.
2007-09-22 Eric Botcazou <ebotcazou@adacore.com>
* utils2.c (build_unary_op) <ADDR_EXPR> [INDIRECT_REF]: Propagate
the TYPE_REF_CAN_ALIAS_ALL flag to the result.
2007-09-21 Olivier Hainque <hainque@adacore.com>
* utils.c (type_for_nonaliased_component_p): Return false for
all AGGREGATE_TYPEs.
2007-09-17 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (gnat_to_gnu_entity) <object>: Make again the type of an
object covered by 13.3(19) volatile.
2007-09-12 Eric Botcazou <ebotcazou@adacore.com>
PR ada/26797
PR ada/32407
* utils.c (unchecked_convert): Use a subtype as the intermediate type
in the special VIEW_CONVERT_EXPR case.
2007-09-12 Robert Dewar <dewar@adacore.com>
* types.ads, a-charac.ads, freeze.adb: Minor reformatting.
* a-except.adb, g-hesora.adb, g-speche.adb, lib.adb, lib.ads,
lib-load.adb, lib-writ.adb, s-assert.adb, s-carun8.adb,
s-casuti.adb, s-crc32.adb, s-exctab.adb, s-htable.adb, s-imgenu.adb,
s-mastop.adb, s-memory.adb, s-memory.ads, s-secsta.adb, s-soflin.adb,
s-sopco3.adb, s-sopco4.adb, s-sopco5.adb, s-stache.adb, s-stalib.adb,
s-stoele.adb, s-strcom.adb, s-strops.adb, s-traceb.adb, s-traent.adb,
s-wchcnv.adb, s-wchcon.adb, s-wchjis.adb, s-addope.adb, s-except.adb,
s-os_lib.adb, s-string.adb, s-utf_32.adb, a-elchha.adb,
a-chlat1.ads, a-elchha.ads, a-except.ads, g-hesora.ads, g-htable.ads,
g-speche.ads, par-prag.adb, restrict.adb, restrict.ads, s-assert.ads,
s-carun8.ads, s-casuti.ads, s-crc32.ads, sem_ch11.adb, sem_prag.adb,
s-exctab.ads, s-htable.ads, s-imgenu.ads, s-mastop.ads, snames.adb,
snames.ads, snames.h, s-purexc.ads, s-secsta.ads, s-soflin.ads,
s-sopco3.ads, s-sopco4.ads, s-sopco5.ads, s-stache.ads, s-stalib.ads,
s-stoele.ads, s-strcom.ads, s-strops.ads, s-traceb.ads, s-traent.ads,
s-unstyp.ads, s-wchcnv.ads, s-wchcon.ads, s-wchjis.ads, s-addope.ads,
s-except.ads, s-os_lib.ads, s-string.ads, s-utf_32.ads: Implement
pragma Compiler_Unit and adds it to relevant library units.
2007-09-12 Ed Schonberg <schonberg@adacore.com>
* sem_aggr.adb (Resolve_Record_Aggregate): An others association with
a box need not correspond to any component.
2007-09-12 Robert Dewar <dewar@adacore.com>
* g-thread.ads: Document use of "with GNAT.Threads" to ensure loading
the tasking version of the Ada run time when foreign threads are
present and there are no explicit Ada tasks or tasking constructs.
* gnat_rm.texi: Clarify documentation of GNAT.Threads.
2007-09-12 Hristian Kirtchev <kirtchev@adacore.com>
* bindusg.adb (Display): Correct comment for switch -X. Add a line for
the usage of switch -y.
* switch-b.adb (Scan_Binder_Switches): Set flag Leap_Seconds_Support
when switch -y is present.
* opt.ads: Add binder flag Leap_Seconds_Support used to enable/disable
leap seconds in Ada.Calendar and its children.
2007-09-12 Jose Ruiz <ruiz@adacore.com>
* a-extiti.ads (Timer): The discriminant is a "not null access
constant" in the Reference Manual.
(Cancel_Handler): Cancelled is an out parameter in the Reference Manual.
2007-09-12 Robert Dewar <dewar@adacore.com>
* a-swuwha.adb: Remove junk RM header
2007-09-12 Vincent Celier <celier@adacore.com>
* g-bytswa-x86.adb (Swap2, Swap4, Swap8): Remove explicit "in" mode
indicator
* g-bytswa.ads: Minor reformatting
2007-09-12 Thomas Quinot <quinot@adacore.com>
* g-soccon-solaris-64.ads, g-soccon-hpux-ia64.ads:
Add new constant Thread_Blocking_IO, always True by default, set False
on a per-runtime basis.
(Need_Netdb_Buffer): New constant.
2007-09-12 Arnaud Charlet <charlet@adacore.com>
* s-dsaser.ads (Get_Local_Partition_Id, Get_Passive_Partition_Id):
Added renames for corresponding functions in System.Partition_Interface.
2007-09-12 Doug Rupp <rupp@adacore.com>
* Makefile.in: Remove VMS specific System.CRTL packages which are no
longer needed.
* s-crtl-vms64.ads: Removed.
2007-09-12 Olivier Hainque <hainque@adacore.com>
* decl.c (gnat_to_gnu_entity) <E_Record_Subtype>: For a subtype
with discriminant constraints, generalize the code for BIT_FIELDs
to PACKED fields of constant size and propagate DECL_PACKED.
2007-09-11 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (array_type_has_nonaliased_component): New predicate.
(gnat_to_gnu_field) <E_Array_Type>: Invoke the above predicate to
set the TYPE_NONALIASED_COMPONENT flag on the type.
<E_Array_Subtype>: Likewise.
* gigi.h (type_for_nonaliased_component_p): Declare.
* utils.c (type_for_nonaliased_component_p): New predicate.
(create_field_decl): Invoke the above predicate to set the
DECL_NONADDRESSABLE_P flag on the field.
2007-09-11 Javier Miranda <miranda@adacore.com>
* einfo.ads, einfo.adb (Dispatch_Table_Wrapper): New attribute. Present
in library level record type entities if we are generating statically
allocated dispatch tables.
* exp_disp.adb (Make_Tags/Make_DT): Replace previous code
importing/exporting the _tag declaration by new code
importing/exporting the dispatch table wrapper. This change allows us
to statically allocate of the TSD.
(Make_DT.Export_DT): New procedure.
(Build_Static_DT): New function.
(Has_DT): New function.
* freeze.adb (Freeze_Static_Object): Code cleanup: Do not reset flags
True_Constant and Current_Value. Required to statically
allocate the dispatch tables.
(Check_Allocator): Make function iterative instead of recursive.
Also return inner allocator node, when present, so that we do not have
to look for that node again in the caller.
2007-09-11 Jan Hubicka <jh@suse.cz>
* misc.c (gnat_expand_body): Kill.
(LANG_HOOKS_CALLGRAPH_EXPAND_FUNCTION): Kill.
2007-09-10 Robert Dewar <dewar@adacore.com>
* exp_atag.ads, exp_atag.adb, mlib-tgt-tru64.adb, mlib-tgt-aix.adb,
mlib-tgt-irix.adb, mlib-tgt-hpux.adb, mlib-tgt-linux.adb,
mlib-tgt-solaris.adb, mlib-tgt-vms-alpha.adb, mlib-tgt-vms-ia64.adb,
mlib-tgt-mingw.adb, mlib-tgt-vxworks.adb, ali.adb, ali.ads,
ali-util.adb, ali-util.ads, atree.h, back_end.adb, back_end.ads,
bcheck.adb, bcheck.ads, binde.adb, binde.ads, binderr.adb, binderr.ads,
bindgen.adb, bindgen.ads, bindusg.adb, bindusg.ads, butil.adb,
butil.ads, checks.adb, checks.ads, clean.adb, clean.ads, comperr.adb,
comperr.ads, cstand.adb, cstand.ads, debug_a.adb, debug_a.ads,
elists.h, errout.adb, erroutc.ads, errutil.adb, errutil.ads,
err_vars.ads, eval_fat.adb, eval_fat.ads, exp_sel.ads, exp_sel.adb,
exp_aggr.adb, exp_aggr.ads, expander.adb, expander.ads, exp_attr.ads,
exp_ch10.ads, exp_ch11.adb, exp_ch12.adb, exp_ch12.ads, exp_ch13.adb,
exp_ch13.ads, exp_ch2.adb, exp_ch2.ads, exp_ch3.ads, exp_ch4.adb,
exp_ch4.ads, exp_ch5.adb, exp_ch5.ads, exp_ch6.adb, exp_ch6.ads,
exp_ch7.adb, exp_ch7.ads, exp_ch8.adb, exp_ch8.ads, exp_ch9.adb,
exp_ch9.ads, exp_code.adb, exp_code.ads, exp_dbug.adb, exp_dbug.ads,
exp_disp.ads, exp_dist.adb, exp_dist.ads, exp_fixd.adb, exp_fixd.ads,
exp_imgv.adb, exp_imgv.ads, exp_intr.adb, exp_intr.ads, exp_pakd.adb,
exp_pakd.ads, exp_prag.adb, exp_prag.ads, exp_smem.adb, exp_strm.adb,
exp_strm.ads, exp_tss.adb, exp_tss.ads, exp_util.adb, exp_util.ads,
exp_vfpt.adb, exp_vfpt.ads, fmap.adb, fmap.ads, fname-sf.adb,
fname-sf.ads, fname-uf.adb, fname-uf.ads, frontend.adb, frontend.ads,
get_targ.adb, get_targ.ads, gnat1drv.adb, gnat1drv.ads, gnatbind.adb,
gnatbind.ads, gnatbl.c, gnatchop.adb, gnatclean.adb, gnatcmd.adb,
gnatcmd.ads, gnatdll.adb, gnatfind.adb, gnatkr.adb, gnatkr.ads,
gnatlbr.adb, gnatlink.adb, gnatlink.ads, gnatls.adb, gnatls.ads,
gnatmake.adb, gnatmake.ads, gnatmem.adb, gnatname.adb, gnatname.ads,
gnatprep.adb, gnatprep.ads, gnatsym.adb, gnatxref.adb,
gprep.adb, gprep.ads, hlo.adb, hlo.ads, impunit.adb, impunit.ads,
inline.adb, inline.ads, itypes.adb, itypes.ads, layout.adb, layout.ads,
lib-load.adb, lib-load.ads, lib-util.adb, lib-util.ads, lib-writ.adb,
lib-writ.ads, lib-xref.adb, lib-xref.ads, live.adb, live.ads,
make.adb, make.ads, makeutl.ads, makeutl.adb, makeusg.adb, makeusg.ads,
mdll.adb, mdll.ads, mdll-fil.adb, mdll-fil.ads, mdll-utl.adb,
mdll-utl.ads, memroot.adb, memroot.ads, mlib.adb, mlib.ads,
mlib-fil.adb, mlib-fil.ads, mlib-prj.adb, mlib-prj.ads, mlib-tgt.adb,
mlib-tgt.ads, mlib-utl.adb, mlib-utl.ads, namet.h, nmake.adt,
osint.adb, osint.ads, osint-b.adb, osint-b.ads, osint-c.adb,
osint-c.ads, osint-l.adb, osint-l.ads, osint-m.adb, osint-m.ads,
par.adb, par.ads, par-ch10.adb, par-ch11.adb, par-ch12.adb,
par-ch13.adb, par-ch2.adb, par-ch3.adb, par-ch4.adb, par-ch5.adb,
par-ch6.adb, par-ch7.adb, par-ch8.adb, par-ch9.adb, par-endh.adb,
par-labl.adb, par-load.adb, par-prag.adb, par-sync.adb, par-tchk.adb,
par-util.adb, prep.adb, prep.ads, prepcomp.adb, prepcomp.ads,
prj.adb, prj.ads, prj-attr.adb, prj-attr.ads, prj-com.ads,
prj-dect.adb, prj-dect.ads, prj-err.adb, prj-err.ads, prj-ext.adb,
prj-ext.ads, prj-makr.adb, prj-makr.ads, prj-nmsc.adb, prj-nmsc.ads,
prj-pars.adb, prj-pars.ads, prj-part.adb, prj-part.ads,
prj-pp.adb, prj-pp.ads, prj-proc.adb, prj-proc.ads,
prj-strt.adb, prj-strt.ads, prj-tree.adb, prj-tree.ads,
prj-util.adb, prj-util.ads, restrict.adb, restrict.ads,
rtsfind.adb, rtsfind.ads, scn.adb, scn.ads,
scng.adb, scng.ads, sdefault.ads, sem.ads, sem_aggr.ads, sem_attr.adb,
sem_case.adb, sem_case.ads, sem_cat.adb, sem_cat.ads, sem_ch10.adb,
sem_ch10.ads, sem_ch11.adb, sem_ch11.ads, sem_ch12.ads, sem_ch13.adb,
sem_ch13.ads, sem_ch2.adb, sem_ch2.ads, sem_ch3.adb, sem_ch3.ads,
sem_ch4.ads, sem_ch5.adb, sem_ch5.ads, sem_ch6.adb, sem_ch6.ads,
sem_ch7.adb, sem_ch7.ads, sem_ch8.adb, sem_ch8.ads, sem_ch9.adb,
sem_ch9.ads, sem_disp.adb, sem_disp.ads, sem_dist.adb, sem_dist.ads,
sem_elab.adb, sem_elab.ads, sem_elim.adb, sem_elim.ads, sem_eval.adb,
sem_eval.ads, sem_intr.adb, sem_intr.ads, sem_maps.adb, sem_maps.ads,
sem_mech.adb, sem_mech.ads, sem_prag.adb, sem_prag.ads, sem_res.adb,
sem_res.ads, sem_smem.adb, sem_smem.ads, sem_type.adb, sem_type.ads,
sem_util.adb, sem_util.ads, sem_vfpt.adb, sem_vfpt.ads, sem_warn.adb,
sem_warn.ads, sfn_scan.ads, sinfo-cn.adb, sinfo-cn.ads, sinput-c.adb,
sinput-c.ads, sinput-d.adb, sinput-d.ads, sinput-l.adb, sinput-l.ads,
sinput-p.adb, sinput-p.ads, snames.h, sprint.adb, sprint.ads,
stringt.h, style.ads, styleg.adb, styleg.ads, styleg-c.adb,
styleg-c.ads, stylesw.adb, stylesw.ads, switch.adb, switch.ads,
switch-b.adb, switch-b.ads, switch-c.adb, switch-c.ads, switch-m.adb,
switch-m.ads, symbols.adb, symbols.ads, targparm.adb, tbuild.adb,
tbuild.ads, tempdir.adb, tempdir.ads, tree_gen.adb, tree_gen.ads,
treepr.adb, treepr.ads, treeprs.adt, ttypef.ads, ttypes.ads,
types.h, uintp.h, urealp.h, usage.adb, usage.ads,
validsw.adb, validsw.ads, vxaddr2line.adb, xeinfo.adb, xnmake.adb,
xref_lib.adb, xref_lib.ads, xr_tabls.adb, xr_tabls.ads, xsinfo.adb,
xtreeprs.adb, xsnames.adb, vms_conv.ads, vms_conv.adb, xgnatugn.adb,
gprmake.adb, makegpr.ads, makegpr.adb, prj-attr-pm.ads, prj-attr-pm.adb,
mlib-tgt-lynxos.adb, mlib-tgt-darwin.adb, symbols-vms.adb,
symbols-processing-vms-alpha.adb, symbols-processing-vms-ia64.adb,
mlib-tgt-specific.adb, mlib-tgt-specific.ads, mlib-tgt-vms.adb,
mlib-tgt-vms.ads: Replace headers with GPL v3 headers.
2007-09-10 Emmanuel Briot <briot@adacore.com>
* s-regpat.adb (Parse_Character_Class): Fix handling of empty character
classes ("[]").
2007-09-10 Vasiliy Fofanov <fofanov@adacore.com>
* adaint.c (__gnat_translate_vms): new function.
2007-09-10 Gary Dismukes <dismukes@adacore.com>
Thomas Quinot <quinot@adacore.com>
* exp_ch3.adb (Predef_Spec_Or_Body): When the type is abstract, only
create an abstract subprogram in the case of 'Input. For 'Output we now
create a real spec/body when the type is abstract, since it can
potentially be called.
(Predefined_Primitive_Bodies): Now allow the creation of a predefined
body for 'Output when the type is abstract (only the creation of the
body for 'Input is excluded when the type is abstract).
(Stream_Operation_OK): Add an additional condition in the return
statement, so that False will be returned for TTS_Stream_Input if the
associated tagged type is an abstract extension. Add comments for
return statement.
(Expand_N_Object_Declaration): For the case of a shared passive
variable, insert init proc call only after the shared variable
procedures have been processed, because the IP call needs to undergo
shared passive variable reference expansion, which requires these
procedures to be available (and elaborated).
2007-09-10 Vincent Celier <celier@adacore.com>
* prj-env.ads, prj-env.adb (Create_Mapping_File (Language)): Remove
parameter Runtime_Project.
2007-09-10 Ed Schonberg <schonberg@adacore.com>
* sem_aggr.adb (Build_Record_Aggr_Code): If an aggregate component is
given a box association, the type of the component is discriminated,
and the value of the discriminant is the discriminant of the enclosing
type, retrieve its value from the aggregate itself, where it must have
been supplied.
* sem_ch4.adb (Analyze_One_Call): Further refinement to previous fix,
to remove other spurious ambiguities on arithmetic operations involving
literals and addresses, on systems where Address is a visible integer
type, when the operator is called in functional notation.
(Try_Primitive_Operation): Within an instance, a call in prefixed form
is legal when the types match, even if the operation is currently
hidden.
2007-09-10 Ed Schonberg <schonberg@adacore.com>
* sem_ch12.adb (Build_Local_Package): A formal package with no
associations is legal if all formals have defaults. It is not
equivalent to a formal declared with a box.
2007-09-10 Sergey Rybin <rybin@adacore.com>
* vms_data.ads: Add qualifier for the new gnatmetric '-lratio' option
2007-09-10 Sergey Rybin <rybin@adacore.com>
* gnat_ugn.texi: Add description of the new '-lratio' option
Update 7.3.1 section about availability of the feature.
2007-09-10 Thomas Quinot <quinot@adacore.com>
* exp_smem.ads, exp_smem.adb (Make_Shared_Var_Procs): Return last
inserted node.
2007-09-10 Olivier Hainque <hainque@adacore.com>
* Makefile.in: (mips-irix section): Activate build of libgmem.
2007-09-10 Eric Botcazou <ebotcazou@adacore.com>
* a-numaux-x86.adb (Logarithmic_Pow): Do not silently clobber
x87 registers.
2007-09-10 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (gnat_to_gnu_entity) <object>: Deal with variable built for
a debug renaming declaration specially.
2007-09-08 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (gnat_to_gnu_entity) <Object>: Simplify the condition under
which a constant renaming is treated as a normal object declaration.
* trans.c (lvalue_required_p) <N_Slice>: New case, extracted from
the N_Indexed_Component case.
<N_Indexed_Component>: Fall through to above case.
<N_Object_Renaming_Declaration>: Return true for all composite types.
2007-09-08 Eric Botcazou <ebotcazou@adacore.com>
* decl.c (make_packable_type): If the new type has been given BLKmode,
try again to get an integral mode for it.
2007-09-07 Eric Botcazou <ebotcazou@adacore.com>
Re-apply accidentally reverted change:
2007-02-07 Andreas Krebbel <krebbel1@de.ibm.com>
* raise-gcc.c (get_region_description_for, get_call_site_action_for,
get_action_description_for): Replace _Unwind_Word with _uleb128_t
and _Unwind_SWord with _sleb128_t.
2007-09-06 Eric Botcazou <ebotcazou@adacore.com>
* trans.c (convert_with_check): Update call to real_2expN.
2007-09-05 Sandra Loosemore <sandra@codesourcery.com>
* trans.c (Compilation_unit_to_gnu): Use set_cfun.
* utils.c (end_subprog_body): Likewise.
2007-09-03 Nick Clifton <nickc@redhat.com>
* Make-lang.in: Change copyright header to refer to version 3 of
the GNU General Public License and to point readers at the
COPYING3 file and the FSF's license web page.
* ada-tree.def, nmake.adt, nlists.h, snames.h, utils.c,
Makefile.rtl, Makefile.in, config-lang.in, uintp.h, urealp.h,
namet.h, decl.c, utils2.c, lang.opt, elists.h, atree.h, types.h,
treeprs.adt, lang-specs.h, cuintp.c, stringt.h, gnatbl.c:
Likewise.
2007-08-31 Vincent Celier <celier@adacore.com>
PR ada/4720
* gnatchop.adb, gnatfind.adb, gnatlink.adb, gnatls.adb,
gnatname.adb, gnatxref.adb, gprep.adb, clean.adb gnatbind.adb
(Check_Version_And_Help): New procedure in package Switch to process
switches --version and --help.
Use Check_Version_And_Help in GNAT tools
* make.adb: Ditto.
(Compile_Sources): Make sure that sources that are "excluded" are not
compiled.
(Gnatmake): Do not issue -aO. to gnatbind and only issue -I- if a
project file is used.
(Version_Switch): Remove, moved to Switch
(Help_Switch): Remove, moved to Switch
(Display_Version): Remove, moved to Switch
* switch.ads, switch.adb (Check_Version_And_Help): New procedure in
package Switch to process switches --version and --help.
(Display_Version): New procedure
* gnatvsn.ads, gnatvsn.adb (Copyright_Holder): New function.
2007-08-31 Javier Miranda <miranda@adacore.com>
* a-tags.adb (Internal_Tag): Protect the run-time against wrong
internal tags.
2007-08-31 Hristian Kirtchev <kirtchev@adacore.com>
* checks.adb (In_Declarative_Region_Of_Subprogram_Body): New routine.
(Mark_Non_Null): If the node for which we just generated an access check
is a reference to an *in* parameter and the reference appears in the
declarative part of a subprogram body, mark the node as known non null.
2007-08-31 Hristian Kirtchev <kirtchev@adacore.com>
* einfo.ads, einfo.adb: New flag Is_Raised (Flag224). Update the
structure of E_Exception to reflect the new flag.
(Is_Raised, Set_Is_Raised): New inlined routines.
Update the usage of available flag to reflect the addition of Is_Raised.
(Is_Raised, Set_Is_Raised): Bodies of new routines.
(Write_Entity_Flags): Write the status of flag Is_Raised.
(Is_Descendent_Of_Address): New entity flag, to simplify handling of
spurious ambiguities when integer literals appear in the context of an
address type that is a visible integer type.
* sem_ch11.adb (Analyze_Exception_Handler): Add code to warn on local
exceptions never being raised.
(Analyze_Raise_Statement): When analyzing an exception, mark it as being
explicitly raised.
2007-08-31 Javier Miranda <miranda@adacore.com>
* exp_ch11.adb (Expand_At_End_Handler): Avoid generation of raise
statement when compiling under restriction No_Exceptions_Proparation.
2007-08-31 Ed Schonberg <schonberg@adacore.com>
* exp_ch3.adb (Build_Record_Init_Proc): If there is a static
initialization aggregate for the type, generate itype references for
thetypes of its (sub)components, to prevent out-of-scope errors in gigi.
2007-08-31 Gary Dismukes <dismukes@adacore.com>
* exp_ch8.adb (Expand_N_Package_Renaming_Declaration): In the case of a
library-level package renaming, pass the declaration associated with
the renaming's special debug variable to Qualify_Entity_Names to ensure
that its encoded name is properly qualified.
* exp_dbug.adb (Qualify_All_Entity_Names): Check for a variable entity
occurring in the list of entities to qualify, and do not attempt to
traverse an entity list in that case. Variables associated with
` library-level package renamings can now occur in the table.
* exp_dbug.ads: Revise documentation of the encoding for renaming
declarations.
2007-08-31 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* layout.adb (Layout_Type): Use Underlying_Type to determine whether an
access type points to an unconstrained array.
2007-08-31 Hristian Kirtchev <kirtchev@adacore.com>
* restrict.adb, namet.adb, par-util.adb: Remove redundant type
conversion.
* sem_res.adb (Resolve_Qualified_Expression): Add machinery to detect
simple redundant qualifications. The check is performed whenever the
expression is a non-overloaded identifier.
(Resolve_Type_Conversion): Enchance the redundant type conversion check
to include loop parameters.
(Valid_Conversion): Avoid generation of spurious error message.
2007-08-31 Bob Duff <duff@adacore.com>
* par-ch4.adb (P_Simple_Expression): Fold long sequences of
concatenations of string literals into a single literal, in order to
avoid very deep recursion in the front end, which was causing stack
overflow.
* sem_eval.adb (Eval_Concatenation): If the left operand is the empty
string, and the right operand is a string literal (the case of "" &
"..."), optimize by avoiding copying the right operand -- just use the
value of the right operand directly.
* stringt.adb (Store_String_Chars): Optimize by growing the
String_Chars table all at once, rather than appending characters one by
one.
(Write_String_Table_Entry): If the string to be printed is very long,
just print the first few characters, followed by the length. Otherwise,
doing "pn(n)" in the debugger can take an extremely long time.
* sem_prag.adb (Process_Interface_Name): Replace loop doing
Store_String_Char with Store_String_Chars.
2007-08-31 Vincent Celier <celier@adacore.com>
* prj-attr.adb: Add new attribute Excluded_Source_Files
* prj-nmsc.adb: Use attribute Excluded_Source_Files before
Locally_Removed_Files.
* snames.ads, snames.adb: New standard name Excluded_Source_Files
2007-08-31 Ed Schonberg <schonberg@adacore.com>
* sem_ch10.adb (Analyze_Subunit_Context): When analyzing context
clauses of subunits, ignore limited_with_clauses that are illegal and
have not been fully analyzed.
2007-08-31 Ed Schonberg <schonberg@adacore.com>
* sem_ch3.adb: The predicate Is_Descendent_Of_Address is now an entity
flag, for effiency. It is called when analyzing arithmetic operators
and also for actuals in calls that are universal_integers. The flag is
set for the predefined type address, and for any type or subtype
derived from it.
* sem_ch4.adb (Analyze_One_Call): Reject an actual that is a
Universal_Integer, when the formal is a descendent of address and the
call appears in user code.
(Analyze_Selected_Component): if the prefix is a private extension, the
tag component is visible.
* sem_util.ads, sem_util.adb: Remove Is_Descendent_Of_Address, now an
entity flag.
2007-08-31 Robert Dewar <dewar@adacore.com>
* s-fileio.adb (Open): Normalize file name to lower case in non-case
sensitive file name systems to avoid unexpected mismatch in Vista.
2007-08-31 Vincent Celier <celier@adacore.com>
* tempdir.adb: On VMS, take into account GNUTMPDIR before TMPDIR
2007-08-31 Vincent Celier <celier@adacore.com>
* symbols-vms.adb (Initialize): Read symbol files with continuation
lines
(Finalize): If symbol is long, split the line
2007-08-31 Vincent Celier <celier@adacore.com>
* fmap.ads: Minor comment updates
2007-08-31 GNAT Script <nobody@adacore.com>
* Make-lang.in: Makefile automatically updated
2007-08-31 Bob Duff <duff@adacore.com>
* sinfo.ads: Minor comment fix.
2007-08-31 Thomas Quinot <quinot@adacore.com>
* stand.ads: (Standard_Debug_Renaming_Type): Make comment consistent
with implementation.
Documentation cleanup only.
2007-08-31 Sergey Rybin <rybin@adacore.com>
* vms_data.ads: Add new qualifier /STMT_NAME_ON_NEW_LINE for the new
gnatpp '--separate-stmt-name' option.
Add new qualifier /USE_ON_NEW_LIN for the new gnatpp '--use-on-new-line'
option.
* gnat_ugn.texi: Add description for the new gnatpp
'--separate-stmt-name' and '--use-on-new-line' options.
2007-08-31 Ben Elliston <bje@au.ibm.com>
* Makefile.in (LIBGNAT_TARGET_PAIRS): Use system-linux-ppc64.ads
when compiling for powerpc64-*-linux.
* system-linux-ppc64.ads: New file.
2007-08-22 Krister Walfridsson <cato@df.lth.se>
* env.c ( __gnat_clearenv): Use the __gnat_unsetenv mechanism for
NetBSD.
2007-08-16 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* misc.c (gnat_type_max_size): Constify.
2007-08-16 Gary Dismukes <dismukes@adacore.com>
* cstand.adb (Create_Standard): Create an entity for a zero-sized type
associated with Standard_Debug_Renaming_Type, to be used as the type of
the special variables whose names provide debugger encodings for
renaming declarations.
* einfo.ads, einfo.adb (Debug_Renaming_Link): Change to return Node25.
(Set_Debug_Renaming_Link): Change to set Node25.
(Write_Field13_Name): Remove case for E_Enumeration_Literal.
(Write_Field25_Name): Add case for E_Variable to output
"Debug_Renaming_Link".
(Write_Field23_Name): Correct the output string for "Limited_View".
* exp_dbug.adb: Add with and use of Tbuild.
(Debug_Renaming_Declaration): Replace creation of an enumeration type
and literal with creation of a variable of type
Standard_Debug_Renaming_Type whose name encodes both the renamed object
and the entity of the renaming declaration.
(Qualify_Entity_Name): Add the delayed qualification of the entity name
part of the name of a variable that has a Debug_Renaming_Link.
* stand.ads (Standard_Debug_Renaming_Type): New Entity_Id denoting a
special type to be associated with variables that provide debugger
encodings for renaming declarations.
2007-08-16 Gary Dismukes <dismukes@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* exp_aggr.adb (Build_Record_Aggr_Code): Extend the test for an
ancestor part given by an aggregate to test for an unchecked conversion,
since this can occur in some cases when the ancestor part is a function
call, and we don't want to fall into the recursive call to this
procedure in that case.
* exp_ch3.adb (Stream_Operation_OK): Revise tests for availability of
stream attributes on limited types to account for user-specified
attributes as well as whether Input (resp. Output) becomes available
due to Read (resp. Write) being available for the type. Change Boolean
variable to the more accurate name
Has_Predefined_Or_Specified_Stream_Attribute. Change convoluted
double-"not" predicate at beginning of return statement to more
understandable form.
* exp_ch5.adb (Expand_N_Extended_Return_Statement): If the extended
return has an associated N_Handled_Sequence_Of_Statements, then wrap it
in a block statement and use that as the first statement of the
expanded return rather than incorrectly using the handled sequence as
the first statement.
* exp_ch6.adb (Expand_N_Subprogram_Declaration): If this is a protected
operation, generate an explicit freeze node for it rather than
generating extra formals, to ensure that gigi has the proper order of
elaboration for anonymous subtypes in the signature of the subprograms.
(Build_In_Place_Formal): Move assertion to beginning of loop.
(Is_Build_In_Place_Function_Call): Allow for an unchecked conversion
applied to a function call (occurs for some cases of 'Input).
(Make_Build_In_Place_Call_In_*): Allow for an unchecked conversion
applied to a function call (occurs for some cases of 'Input).
* exp_strm.adb (Build_Record_Or_Elementary_Input_Function): For Ada
2005, generate an extended return statement enclosing the result object
and 'Read call.
* freeze.adb (Freeze_Record_Type): Extend the current management of
components that are access type with an allocator as default value: add
missing support to the use of qualified expressions of the
allocator (which also cause freezing of the designated type!)
(Freeze_Entity): Call Freeze_Subprogram in the case of a predefined
dispatching operation, since extra formals may be needed by calls to
build-in-place functions (such as stream 'Input).
* sem_ch6.adb (Create_Extra_Formals): Skip creation of the extra
formals for 'Constrained and accessibility level in the case of a
predefined dispatching operation.
* exp_util.adb (Insert_Actions): A protected body is a valid insertion
point, no need to find the parent node.
2007-08-16 Javier Miranda <miranda@adacore.com>
* exp_attr.adb (Attribute_Priority): Add missing support for entries
and entry barriers.
2007-08-16 Javier Miranda <miranda@adacore.com>
* exp_ch9.adb (Build_Protected_Entry): Undo previous change because it
is not really required and can introduce regression with the debugger.
The original problem is fixed with the patch written for checks.adb.
2007-08-16 Thomas Quinot <quinot@adacore.com>
* g-dyntab.adb, g-table.adb, table.adb: (Set_Item): Suppress
Range_Check on Allocated_Table.
2007-08-16 Vincent Celier <celier@adacore.com>
* make.adb (Collect_Arguments): Call Test_If_Relative_Path with
Including_Non_Switch set to False.
(Gnatmake): For the compiler, call Test_If_Relative_Path with
Including_Non_Switch set to False.
* makeutl.adb, makeutl.ads (Test_If_Relative_Path): New Boolean
parameter Including_Non_Switch, defaulted to True. When
Including_Non_Switch is False, options that are not switches and
appear as relative path are not converted to absolute paths.
2007-08-16 Nicolas Roche <roche@adacore.com>
* Makefile.in (gnatlib): Propagate FORCE_DEBUG_ADAFLAGS value to sub
makefiles
* Make-lang.in: Update dependencies
2007-08-16 Hristian Kirtchev <kirtchev@adacore.com>
* sem_ch10.adb (Has_With_Clause): If the name of the with clause
currently inspected is a selected component, retrieve the entity of
its selector.
(Install_Limited_Withed_Unit): Call Has_Limited_With_Clause starting
from the immediate ancestor of Main_Unit_Entity.
(Install_Limited_Withed_Unit): Do not install the limited view of
package P if P is reachable through an ancestor chain from package C
and C also has a with clause for P in its body.
(Has_Limited_With_Clause): New routine.
(Has_With_Clause): New routine.
2007-08-16 Ed Schonberg <schonberg@adacore.com>
* sem_ch12.adb (Copy_Generic_Node): A reference to a child unit of the
generic for an enclosing instance is a global reference, even though
its scope is the enclosing instance.
2007-08-16 Gary Dismukes <dismukes@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_ch3.adb (OK_For_Limited_Init_In_05): Allow calls to 'Input to
initialize a limited object.
(Build_Derived_Record_Type): Add missing check of rules ARM 3.9.4
13/2 and 14/2.
Make sure Has_Complex_Representation is inherited by derived type.
2007-08-16 Robert Dewar <dewar@adacore.com>
* sem_ch5.adb (Analyze_Assignment): Make sure we still note update in
exception case
2007-08-16 Ed Schonberg <schonberg@adacore.com>
* sem_disp.adb (Check_Dispatching_Operation): If the operation
implements an operation inherited from a progenitor interface, verify
that they are subtype-conformant.
2007-08-16 Hristian Kirtchev <kirtchev@adacore.com>
Bob Duff <duff@adacore.com>
Nicolas Setton <setton@adacore.com>
* sem_res.adb (Comes_From_Predefined_Lib_Unit): New.
(Resolve): Alphabetize local variables. Add new variable From_Lib. When
the statement which is being resolved comes from a predefined library
unit, all non-predefined library interpretations are skipped.
(Resolve_Op_Concat): If string concatenation was folded in the parser,
but the "&" is user defined, give an error, because the folding would
be wrong.
* sinfo.ads, sinfo.adb (Is_Folded_In_Parser): New flag to indicate that
the parser has folded a long sequence of concatenations of string
literals.
* trans.c (Handled_Sequence_Of_Statements_to_gnu): Mark "JMPBUF_SAVE"
and "JMP_BUF" variables as artificial.
(N_String_Literal): Do not use alloca for very long string literals. Use
xmalloc/free instead. Otherwise the stack might overflow.
* utils.c (init_gigi_decls): Mark "JMPBUF_T" type as created by the
compiler.
2007-08-16 Vincent Celier <celier@adacore.com>
* vms_conv.adb (Process_Argument): Ensure that project related options
are not put in the -cargs section when using GNAT COMPILE.
2007-08-16 Robert Dewar <dewar@adacore.com>
* gnat_ugn.texi: Add note on preprocessing (output file not written)
2007-08-16 Thomas Quinot <quinot@adacore.com>
* a-tags.adb: Minor reformatting.
2007-08-16 Bob Duff <duff@adacore.com>
* sem_type.ads, sem_ch4.adb: Minor reformatting.
2007-08-14 Thomas Quinot <quinot@adacore.com>
* g-soccon-interix.ads, a-excpol-interix.adb, a-intnam-interix.ads,
s-osinte-interix.ads, system-interix.ads: Removed.
2007-08-14 Hristian Kirtchev <kirtchev@adacore.com>
* a-calend-vms.adb, a-calend.adb ("+", "-", Add, Subtract): Remove
calls to Check_Within_Time_Bounds.
("+", "-", Add, Subtract): Remove calls to Check_Within_Time_Bounds.
(Difference): Account for possible rounding of the resulting difference
2007-08-14 Robert Dewar <dewar@adacore.com>
* uintp.adb, a-ztedit.adb, s-wchcon.adb, xnmake.adb, s-wchcon.adb,
par-ch5.adb, par-ch10.adb, get_targ.adb, a-wtedit.adb, a-teioed.adb,
s-osinte-solaris.adb, s-osinte-solaris.ads,
s-osinte-freebsd.ads, s-osinte-freebsd.adb: Minor reformatting.
* styleg.adb, styleg.ads, stylesw.adb, stylesw.ads: implement style
switch -gnatyS. Enable -gnatyS in GNAT style check mode
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* inline.adb, types.ads, inline.ads, frontend.adb, alloc.ads:
Suppress unmodified in-out parameter warning in some cases
This patch is a also fairly significant change to the way suppressible
checks are handled.
* checks.ads, checks.adb (Install_Null_Excluding_Check): No check
needed for access to concurrent record types generated by the expander.
(Generate_Range_Check): When generating a temporary to capture the
value of a conversion that requires a range check, set the type of the
temporary before rewriting the node, so that the type is always
properly placed for back-end use.
(Apply_Float_Conversion_Check): Handle case where the conversion is
truncating.
(Get_Discriminal): Code reformatting. Climb the scope stack looking
for a protected type in order to examine its discriminants.
2007-08-14 Robert Dewar <dewar@adacore.com>
Gary Dismukes <dismukes@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Thomas Quinot <quinot@adacore.com>
* a-stzsup.adb, nlists.adb, lib-util.adb, treepr.adb,
a-stwisu.adb, a-strsup.adb: Fix warnings for range
tests optimized out.
* exp_ch4.adb (Expand_N_In): Add warnings for range tests optimized out.
(Get_Allocator_Final_List): For the case of an anonymous access type
that has a specified Associated_Final_Chain, do not go up to the
enclosing scope.
(Expand_N_Type_Conversion): Test for the case of renamings of access
parameters when deciding whether to apply a run-time accessibility
check.
(Convert_Aggr_In_Allocator): Use Insert_Actions to place expanded
aggregate code before allocator, and ahead of declaration for
temporary, to prevent access before elaboration when the allocator is
an actual for an access parameter.
(Expand_N_Type_Conversion): On an access type conversion involving an
access parameter, do not apply an accessibility check when the
operand's original node was an attribute other than 'Access. We now
create access conversions for the expansion of 'Unchecked_Access and
'Unrestricted_Access in certain cases and clearly accessibility should
not be checked for those.
* exp_ch6.ads, exp_ch6.adb (Add_Call_By_Copy_Code): For an actual that
includes a type conversion of a packed component that has been expanded,
recover the original expression for the object, and use this expression
in the post-call assignment statement, so that the assignment is made
to the object and not to a back-end temporary.
(Freeze_Subprogram): In case of primitives of tagged types not defined
at the library level force generation of code to register the primitive
in the dispatch table. In addition some code reorganization has been
done to leave the implementation clear.
(Expand_Call): When expanding an inherited implicit conversion,
preserve the type of the inherited function after the intrinsic
operation has been expanded.
* exp_ch2.ads, exp_ch2.adb
(Expand_Entry_Parameter.In_Assignment_Context): An implicit dereference
of an entry formal appearing in an assignment statement does not assign
to the formal.
(Expand_Current_Value): Instead of calling a routine to determine
whether the prefix of an attribute reference should be optimized or
not, prevent the optimization of such prefixes all together.
* lib-xref.adb (Generate_Reference.Is_On_LHS): An indexed or selected
component whose prefix is known to be of an access type is an implicit
dereference and does not assign to the prefix.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* atree.ads, atree.adb (New_Copy_Tree): If hash table is being used and
itype is visited, make an entry into table to link associated node and
new itype.
Add comments and correct harmless error in Build_NCT_Hash_Tables
(Array_Aggr_Subtype): Associate each itype created for an index type to
the corresponding range construct, and not to the aggregate itself. to
maintain a one-to-one correspondence between itype and its associated
node, to prevent errors when complex expression is copied.
Fix mishandling of multiple levels of parens
* sem_aggr.adb: Create a limited view of an incomplete type, to make
treatment of limited views uniform for all visible declarations in a
limited_withed package.
(New_Copy_Tree): If hash table is being used and itype is visited,
make an entry into table to link associated node and new itype.
(Resolve_Record_Aggregate): Do not add an others box association for a
discriminated record component that has only discriminants, when there
is a box association for the component itself.
* par-ch4.adb: Fix mishandling of multiple levels of parens
2007-08-14 Robert Dewar <dewar@adacore.com>
* comperr.adb: Fix problem with suppressing warning messages from gigi
* erroutc.ads, erroutc.adb, errout.ads,
errout.adb (Write_Eol): Remove trailing spaces before writing the line
(Write_Eol_Keep_Blanks): New procedure to write a line, including
possible trailing spaces.
(Output_Source_Line): Call Write_Eol_Keep_Blanks to output a source line
Fix problem with suppressing warning messages from back end
Improve handling of deleted warnings
* gnat1drv.adb:
Fix problem with suppressing warning messages from back end
Handle setting of Static_Dispatch_Tables flag.
* prepcomp.adb:
Fix problem with suppressing warning messages from back end
* exp_intr.adb: Improve handling of deleted warnings
2007-08-14 Robert Dewar <dewar@adacore.com>
* debug.adb: Improve -gnatdI to cover all cases of serialization
Add documentation of dZ, d.t
* sprint.ads, sprint.adb: Improve -gnatdI to cover all cases of
serialization.
(Sprint_Node_Actual): Generate new output associated with implicit
importation and implicit exportation of object declarations.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* einfo.ads, einfo.adb: Create a limited view of an incomplete type,
to make treatment of limited views uniform for all visible declarations
in a limited_withed package.
Improve warnings for in out parameters
(Set_Related_Interaface/Related_Interface): Allow the use of this
attribute with constants.
(Write_Field26_Name): Handle attribute Related_Interface in constants.
Warn on duplicate pragma Preelaborable_Initialialization
* sem_ch6.ads, sem_ch6.adb (Analyze_Subprogram_Body): Force the
generation of a freezing node to ensure proper management of null
excluding access types in the backend.
(Create_Extra_Formals): Test base type of the formal when checking for
the need to add an extra accessibility-level formal. Pass the entity E
on all calls to Add_Extra_Formal (rather than Scope (Formal) as was
originally being done in a couple of cases), to ensure that the
Extra_Formals list gets set on the entity E when the first entity is
added.
(Conforming_Types): Add missing calls to Base_Type to the code that
handles anonymous access types. This is required to handle the
general case because Process_Formals builds internal subtype entities
to handle null-excluding access types.
(Make_Controlling_Function_Wrappers): Create wrappers for constructor
functions that need it, even when not marked Requires_Overriding.
Improve warnings for in out parameters
(Analyze_Function_Return): Warn for disallowed null return
Warn on return from procedure with unset out parameter
Ensure consistent use of # in error messages
(Check_Overriding_Indicator): Add in parameter Is_Primitive.
(Analyze_Function_Return): Move call to Apply_Constraint_Check before
the implicit conversion of the expression done for anonymous access
types. This is required to generate the code of the null excluding
check (if required).
* sem_warn.ads, sem_warn.adb (Check_References.Publicly_Referenceable):
A formal parameter is never publicly referenceable outside of its body.
(Check_References): For an unreferenced formal parameter in an accept
statement, use the same warning circuitry as for subprogram formal
parameters.
(Warn_On_Unreferenced_Entity): New subprogram, taken from
Output_Unreferenced_Messages, containing the part of that routine that
is now reused for entry formals as described above.
(Goto_Spec_Entity): New function
(Check_References): Do not give IN OUT warning for dispatching operation
Improve warnings for in out parameters
(Test_Ref): Check that the entity is not undefinite before calling
Scope_Within, in order to avoid infinite loops.
Warn on return from procedure with unset out parameter
Improved warnings for unused variables
2007-08-14 Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* exp_attr.adb (Expand_N_Attribute_Reference): Handle case of child unit
(Expand_N_Attribute_Reference): Further unify the handling of the
three forms of access attributes, using common code now for all three
cases. Add a test for the case of applying an access attribute to
an explicit dereference when the context is an access-to-interface
type. In that case we need to apply the conversion to the prefix
of the explicit dereference rather than the prefix of the attribute.
(Attribute_Version, UET_Address): Set entity as internal to ensure
proper dg output of implicit importation.
(Expand_Access_To_Type): Removed.
(Expand_N_Attribute_Reference): Merge the code from the three cases
of access attributes, since the processing is largely identical for
these cases. The substantive fix here is to process the case of a
type name prefix (current instance case) before handling the case
of interface prefixes.
2007-08-14 Thomas Quinot <quinot@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
Robert Dewar <dewar@adacore.com>
* exp_ch3.ads, exp_ch3.adb (Add_Final_Chain): New subprogram.
(Freeze_Array_Type, Freeze_Record_Type): For the case of a component
type that is an anonymous access to controlled object, establish
an associated finalization chain to avoid corrupting the global
finalization list when a dynamically allocated object designated
by such a component is deallocated.
(Make_Controlling_Function_Wrappers): Create wrappers for constructor
functions that need it, even when not marked Requires_Overriding.
(Initialize_Tag): Replace call to has_discriminants by call to
Is_Variable_Size_Record in the circuitry that handles the
initialization of secondary tags.
(Is_Variable_Size_Record): New implementation.
(Expand_N_Object_Declaration): Suppress call to init proc if there is a
Suppress_Initialization pragma for a derived type.
(Is_Variable_Size_Record): New subprogram.
(Build_Offset_To_Top_Functions): New implementation that simplifies the
initial version of this routine and also fixes problems causing
incomplete initialization of the table of interfaces.
(Build_Init_Procedure): Improve the generation of code to initialize the
the tag components of secondary dispatch tables.
(Init_Secondary_Tags): New implementation that simplifies the previous
version of this routine.
(Make_DT): Add parameter to indicate when type has been frozen by an
object declaration, for diagnostic purposes.
(Check_Premature_Freezing): New subsidiary procedure of Make_DT, to
diagnose attemps to freeze a subprogram when some untagged type of its
profile is a private type whose full view has not been analyzed yet.
(Freeze_Array_Type): Generate init proc for packed array if either
Initialize or Normalize_Scalars is set.
(Make_Controlling_Function_Wrappers, Make_Null_Procedure_Specs): when
constructing the new profile, copy the null_exclusion indicator for each
parameter, to ensure full conformance of the new body with the spec.
* sem_type.ads, sem_type.adb (Make_Controlling_Function_Wrappers):
Create wrappers for constructor functions that need it, even when not
marked Requires_Overriding.
(Covers): Handle properly designated types of anonymous access types,
whose non-limited views are themselves incomplete types.
(Add_Entry): Use an entity to store the abstract operation which hides
an interpretation.
(Binary_Op_May_Be_Hidden): Rename to Binary_Op_Interp_Has_Abstract_Op.
(Collect_Interps): Use Empty as an actual for Abstract_Op in the
initialization aggregate.
(Function_Interp_May_Be_Hidden): Rename to
Function_Interp_Has_Abstract_Op.
(Has_Compatible_Type): Remove machinery that skips interpretations if
they are labeled as potentially hidden by an abstract operator.
(Has_Hidden_Interp): Rename to Has_Abstract_Op.
(Set_May_Be_Hidden): Rename to Set_Abstract_Op.
(Write_Overloads): Output the abstract operator if present.
(Add_Entry): Before inserting a new entry into the interpretation table
for a node, determine whether the entry will be disabled by an abstract
operator.
(Binary_Op_Interp_May_Be_Hidden): New routine.
(Collect_Interps): Add value for flag May_Be_Hidden in initialization
aggregate.
(Function_Interp_May_Be_Hidden): New routine.
(Has_Compatible_Type): Do not consider interpretations hidden by
abstract operators when trying to determine whether two types are
compatible.
(Has_Hidden_Interp): New routine.
(Set_May_Be_Hidden_Interp): New routine.
(Write_Overloads): Write the status of flag May_Be_Hidden.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* exp_disp.ads, exp_disp.adb (Build_Dispatch_Tables): Handle tagged
types declared in the declarative part of a nested package body or in
the proper body of a stub.
(Set_All_DT_Position): Add missing check to avoid wrong assignation
of the same dispatch table slot to renamed primitives.
(Make_Select_Specific_Data_Table): Handle private types.
(Tagged_Kind): Handle private types.
(Make_Tags, Make_DT): Set tag entity as internal to ensure proper dg
output of implicit importation and exportation.
(Expand_Interface_Thunk): Fix bug in the expansion assuming that the
first formal of the thunk is always associated with the controlling
type. In addition perform the following code cleanup: remove formal
Thunk_Alias which is no longer required, cleanup evaluation of the
the controlling type, and update the documentation.
Replace occurrence of Default_Prim_Op_Count by
Max_Predef_Prims. Addition of compile-time check to verify
that the value of Max_Predef_Prims is correct.
(Check_Premature_Freezing): Apply check in Ada95 mode as well.
(Make_DT): Add parameter to indicate when type has been frozen by an
object declaration, for diagnostic purposes.
(Build_Static_Dispatch_Tables): New subprogram that takes care of the
construction of statically allocated dispatch tables.
(Make_DT): In case of library-level tagged types export the declaration
of the primary tag. Remove generation of tags (now done by Make_Tags).
Additional modifications to handle non-static generation of dispatch
tables. Take care of building tables for asynchronous interface types
(Make_Tags): New subprogram that generates the entities associated with
the primary and secondary tags of Typ and fills the contents of Access_
Disp_Table. In case of library-level tagged types imports the forward
declaration of the primary tag that will be declared later by Make_DT.
(Expand_Interface_Conversion): In case of access types to interfaces
replace an itype declaration by an explicit type declaration to avoid
problems associated with the scope of such itype in transient blocks.
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* exp_util.ads, exp_util.adb:
This patch replaces a number of occurrences of explicit tests for N_Null
with calls to Known_Null. This improves tracking of null values, since
Known_Null also catches null constants, and variables currently known to
be null, so we get better tracking.
(Ensure_Defined): create an itype reference only in the scope of the
itype.
(Side_Effect_Free): A selected component of an access type that
denotes a component with a rep clause must be treated as not
side-effect free, because if it is part of a linked structure its
value may be affected by a renaming.
(Expand_Subtype_From_Expr): For limited objects initialized with build
in place function calls, do nothing; otherwise we prematurely introduce
an N_Reference node in the expression initializing the object, which
breaks the circuitry that detects and adds the additional arguments to
the called function. Bug found working in the new patch for statically
allocated dispatch tables.
(Is_Library_Level_Tagged_Type): New subprogram.
(Remove_Side_Effects): If the expression of an elementary type is an
operator treat as a function call.
(Make_Literal_Range): If the index type of the array is not integer, use
attributes properly to compute the constraint on the resulting aggregate
which is a string.
* freeze.ads, freeze.adb (Freeze_Entity): If the entity is a
class-wide type whose base type is an incomplete private type, leave
class-wide type unfrozen so that freeze nodes can be generated
properly at a later point.
(Freeze_Entity, array case): Handle case of pragma Pack and component
size attributre clause for same array.
2007-08-14 Vincent Celier <celier@adacore.com>
* prj.ads, prj.adb: Update Project Manager to new attribute names for
gprbuild.
Allow all valid declarations in configuration project files
(Reset): Initialize all tables and hash tables in the project tree data
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
(Slash_Id): Change type to be Path_Name_Type
(Slash): Return a Path_Name_Type instead of a File_Name_Type
* prj-attr.ads, prj-attr.adb: Remove attributes no longer used by
gprbuild.
Update Project Manager to new attribute names for ghprbuild
Allow all valid declarations in configuration project files
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
* prj-com.ads:
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
* prj-dect.adb (Prj.Strt.Attribute_Reference): Set correctly the case
insensitive flag for attributes with optional index.
(Prj.Dect.Parse_Attribute_Declaration): For case insensitive associative
array attribute, put the index in lower case.
Update Project Manager to new attribute names for ghprbuild
Allow all valid declarations in configuration project files
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
* prj-env.ads, prj-env.adb:
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
(Get_Reference): Change type of parameter Path to Path_Name_Type
* prj-ext.ads, prj-ext.adb (Initialize_Project_Path): Make sure, after
removing '-' from the path to start with the first character of the
next directory.
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
* prj-nmsc.ads, prj-nmsc.adb:
Update Project Manager to new attribute names for ghprbuild
Allow all valid declarations in configuration project files
(Search_Directories): Detect subunits that are specified with an
attribute Body in package Naming. Do not replace a source/unit in the
same project when the order of the source dirs are known. Detect
duplicate sources/units in the same project when the order of the
source dirs are not known.
(Check_Ada_Name): Allow all identifiers that are not reserved words
in Ada 95.
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
(Look_For_Sources): If the list of sources is empty, set the object
directory of non extending project to nil.
Change type of path name variables to be Path_Name_Type
(Locate_Directory): Make sure that on Windows '/' is converted to '\',
otherwise creating missing directories will fail.
* prj-attr-pm.adb, prj-tree.ads, prj-proc.ads, prj-proc.adb,
prj-part.ads, prj-part.adb:
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
* prj-strt.adb (Prj.Strt.Attribute_Reference): Set correctly the case
insensitive flag for attributes with optional index.
(Prj.Dect.Parse_Attribute_Declaration): For case insensitive associative
array attribute, put the index in lower case.
(Parse_Variable_Reference): Allow the current project name to be used in
the prefix of an attribute reference.
* prj-util.ads, prj-util.adb
(Value_Of (for arrays)): New Boolean parameter Force_Lower_Case_Index,
defaulted to False. When True, always check against indexes in lower
case.
* snames.ads, snames.h, snames.adb:
Update Project Manager to new attribute names for gprbuild
Allow all valid declarations in configuration project files
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* opt.ads: Warning for non-local exception propagation now off by
default
New switch -gnatI to disable representation clauses
Implement new pragma Implicit_Packing
* usage.adb:
Warning for non-local exception propagation now off by default
Add warning for unchecked conversion of pointers wi different
conventions.
New switch -gnatI to disable representation clauses
* usage.adb: new switch -gnatyS
* gnat_ugn.texi: For the gnatcheck Non_Qualified_Aggregates rule add a
note that aggregates of anonymous array types are not flagged.
-gnatwc now includes membership tests optimized away
-gnatw.x warnings are now off by default
Added conditional compilation Appendix
Add documentation of -gnatI
Add documentation for new -gnatyS style check
Update documentation about SAL and auto-init on Windows.
* gnat_rm.texi:
Add documentation for pragma Check_Name and 'Enabled attribute
Document that Eliminate on dispatching operation is ignored
Document IDE attributes VCS_Repository_Root and VCS_Patch_Root.
Document pragma Main
Document pragma Implicit_Packing
* sem_ch13.adb: Add warning for unchecked conversion of pointers wi
different conventions
New switch -gnatI to disable representation clauses
* switch-c.adb (Scan_Front_End_Switches): When a -gnat switch is not
recognized, report the invalid characters including "-gnat" instead of
just the first character in the switch.
New switch -gnatI to disable representation clauses
Set Warn_On_Object_Renames_Function true for -gnatg
* vms_data.ads: Add doc for /IGNORE_REP_CLAUSES
Add STATEMENTS_AFTER_THEN_ELSE as synonym for -gnatyS
Add qualifier /ADD_PROJECT_SEARCH_DIR= for different tools, equivalent
to switch -aP (add directory to project search dir).
* par-prag.adb: Implement new pragma Implicit_Packing
* sem_prag.adb (Analyze_Pragma, case Complex_Representation): Mark the
type as having a non-standard representation, to force expansion on
conversion to related types.
(Analyze_Pragma): Warn on misspelled pragma
(Analyze_Pragma, case Convention_Identifier): Fix checking of second arg
Ensure consistent use of # in error messages
Implement pragma Implicit_Packing
2007-08-14 Olivier Hainque <hainque@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* targtyps.c (get_target_maximum_default_alignment): New function.
Maximum alignment
that the compiler might choose by default for a type or object.
(get_target_default_allocator_alignment): New function. Alignment known
to be honored by the target default allocator.
(get_target_maximum_allowed_alignment): New function. Maximum alignment
we might accept for any type or object on the target.
(get_target_maximum_alignment): Now synonym of maximum_default_alignment
* gigi.h (get_target_maximum_default_alignment): Declare new function.
(get_target_default_allocator_alignment): Likewise.
(get_target_maximum_allowed_alignment): Likewise.
PR ada/19037
* decl.c (gnat_to_gnu_entity) <object>: Except for the renaming of the
result of a function call, first try to use a stabilized reference for
a constant renaming too.
(validate_alignment): Use target_maximum_allowed_alignment instead of
MAX_OFILE_ALIGNMENT as the upper bound to what we accept.
(gnat_to_gnu_entity): Use common nodes directly.
(gnat_to_gnu_entity) <object>: Pick the values of the type to annotate
alignment and size for the object.
(lvalue_required_p): Handle N_Parameter_Association like N_Function_Call
and N_Procedure_Call_Statement.
(takes_address): Rename to lvalue_required_p, add third parameter
'aliased' and adjust recursive calls.
<N_Indexed_Component>: Update 'aliased' from the array type.
<N_Selected_Component>: New case.
<N_Object_Renaming_Declaration>: New Likewise.
(Identifier_to_gnu): Adjust for above changes.
(maybe_stabilize_reference) <CONST_DECL>: New case.
* utils2.c (build_binary_op) <ARRAY_RANGE_REF>: Look through conversion
between type variants.
(build_simple_component_ref): Likewise.
(build_call_alloc_dealloc): Use target_default_allocator_alignment
instead of BIGGEST_ALIGNMENT as the threshold to trigger the super
aligning type circuitry for allocations from the default storage pool.
(build_allocator): Likewise.
(build_simple_component_ref): Manually fold the reference for a
constructor if the record type contains a template.
* utils.c (value_zerop): Delete.
(gnat_init_decl_processing): Emit debug info for common types.
(rest_of_record_type_compilation): If a union contains a field
with a non-constant qualifier, treat it as variable-sized.
(finish_record_type): Give the stub TYPE_DECL a name.
(rest_of_record_type_compilation): Likewise.
(convert) <CONSTRUCTOR>: New case. Build a new constructor if
types are equivalent array types.
(create_field_decl): Claim fields of any ARRAY_TYPE are addressable,
even if the type is not passed by reference.
(static_ctors, static_dtors): Delete.
(end_subprog_body): Do not record constructors and destructors.
(build_global_cdtor): Delete.
(gnat_write_global_declarations): Do not call build_global_cdtor.
* lang-spARGET_VXWORKS_RTP is defined, append -mrtp when
-fRTS=rtp is specified.
If CONFIG_DUAL_EXCEPTIONS is 1, append -fsjlj when -fRTS=sjlj is
specified.
* misc.c (gnat_init_gcc_eh): Use __gnat_eh_personality_sj for the name
of the personality function with SJLJ exceptions.
* raise-gcc.c (PERSONALITY_FUNCTION): Use __gnat_eh_personality_sj for
the name of the personality function with SJLJ exceptions.
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* par.ads, par.adb: Improve handling of extra right parens.
(Par): Remove flag From_Limited_With_Clause.
* par-util.adb, par-ch3.adb: Improve error recovery for bad constraint
Improve handling of extra right parens.
2007-08-14 Robert Dewar <dewar@adacore.com>
* par-tchk.adb (TF_Semicolon): Improve error recovery
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_attr.ads, sem_attr.adb (Analyze_Attribute, case Value): For
enumeration type, mark all literals as referenced.
(Eval_Attribute, case 'Image): If the argument is an enumeration
literal and names are available, constant-fold but mark nevertheless as
non-static.
Clean up function names.
(Name_Modifies_Prefix): Rename to Name_Implies_Lvalue_Prefix. Clarify
comment.
(Requires_Simple_Name_Prefix): Removed.
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch11.adb: Improved warnings for unused variables
* sem_ch3.ads, sem_ch3.adb (Build_Derived_Record_Type): If the ancestor
is a synchronized interface, the derived type is limited.
(Analyze_Object_Declaration): Mark the potential coextensions in the
definition and expression of an object declaration node.
(Build_Derived_Type): For the completion of a private type declaration
with a derived type declaration, chain the parent type's representation
items to the last representation item of the derived type (not the
first one) if they are not present already.
(Analyze_Object_Declaration, Constant_Redeclaration): Allow incomplete
object declaration of forward references to tags.
(Access_Subprogram_Declaration): In Ada2005, anonymous access to
subprogram types can appear as access discriminants of synchronized
types.
(OK_For_Limited_Init_In_05): The initialization is legal is it is a call
given in prefixed form as a selected component.
(Process_Discriminants): If not all discriminants have defaults, place
error message on a default that is present.
(Analyze_Private_Extension_Declaration): Diagnose properly an attempt to
extend a synchronized tagged type.
Improved warnings for unused variables
(Is_Visible_Component): Fix a visibility hole on a component inherited
by a private extension when parent is itself declared as a private
extension, and the derivation is in a child unit.
(Find_Hidden_Interface): Move spec from the package body.
2007-08-14 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch5.adb: Improve warnings on redundant assignments
* sem_util.ads, sem_util.adb: (Is_Variable): Add defense against junk
parameter
(Is_Synchronized_Tagged_Type): New subprogram that returns true
in case of synchronized tagged types (AARM 3.9.4 (6/2)).
(Safe_To_Capture_Value): Can now return True for constants, even if Cond
is set to False. Improves handling of Known_[Not_]Null.
(Wrong_Type): Special case address arithmetic attempt
(Collect_Abstract_Interfaces): Add new formal to allow collecting
abstract interfaces just using the partial view of private types.
(Has_Abstract_Interfaces): Add new formal to allow checking types
covering interfaces using the partial view of private types.
(Is_Fully_Initialized_Type): Special VM case for uTag component. This
component still needs to be defined in this case, but is never
initialized as VMs are using other dispatching mechanisms.
(Abstract_Interface_List): For a protected type, use base type to get
proper declaration.
Improve warnings on redundant assignments
(Is_Variable): Handle properly an implicit dereference of a prefixed
function call.
(Build_Actual_Subtype): If this is an actual subtype for an
unconstrained formal parameter, use the sloc of the body for the new
declaration, to prevent anomalises in the debugger.
2007-08-14 Robert Dewar <dewar@adacore.com>
* sem_elim.adb (Set_Eliminated): Ignore pragma Eliminate for
dispatching operation
2007-08-14 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* exp_aggr.ads,
exp_aggr.adb (Convert_Aggr_In_Allocator): Use Insert_Actions to place
expanded aggregate code before allocator, and ahead of declaration for
temporary, to prevent access before elaboration when the allocator is
an actual for an access parameter.
(Is_Static_Dispatch_Table_Aggregate): Handle aggregates initializing
the TSD and the table of interfaces.
(Convert_To_Assignments): Augment the test for delaying aggregate
expansion for limited return statements to include the case of extended
returns, to prevent creation of an unwanted transient scope.
(Is_Static_Dispatch_Table_Aggregate): New subprogram.
(Expand_Array_Aggregate): Handle aggregates associated with
statically allocated dispatch tables.
(Expand_Record_Aggregate): Handle aggregates associated with
statically allocated dispatch tables.
(Gen_Ctrl_Actions_For_Aggr): Generate a finalization list for allocators
of anonymous access type.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
* exp_ch5.adb (Expand_Assign_Array): If source or target of assignment
is a variable that renames a slice, use the variable itself in the
expannsion when the renamed expression itself may be modified between
the declaration of the renaming and the array assignment.
2007-08-14 Jerome Guitton <guitton@adacore.com>
* s-taprop-lynxos.adb, s-taprop-tru64.adb, s-taprop-irix.adb,
s-taprop-hpux-dce.adb, s-taprop-dummy.adb, s-taprop-solaris.adb,
s-taprop-vms.adb, s-taprop-posix.adb (Continue_Task, Stop_All_Tasks):
New functions; dummy implementations.
* s-osinte-vxworks.ads (Task_Stop, Task_Cont, Int_Lock, Int_Unlock): New
functions, used to implement the multi-tasks mode routines on VxWorks.
* s-osinte-vxworks.adb, s-osinte-vxworks6.adb (Task_Cont, Task_Stop):
New functions, thin
binding to the VxWorks routines which have changed between VxWorks 5
and 6.
(Int_Lock, Int_Unlock): New function, thin binding to kernel routines
which are not callable from a RTP.
* s-taprop-vxworks.adb (Stop_All_Tasks, Continue_Task): New functions,
implemented for the multi-tasks mode on VxWorks 5 and 6.
* s-taprop.ads (Stop_All_Tasks, Continue_Task): New functions.
* s-tasdeb.ads, s-tasdeb.adb (Continue_All_Tasks, Stop_All_Tasks): New
functions.
2007-08-14 Vincent Celier <celier@adacore.com>
* clean.adb, fmap.adb, sinput-p.adb, sinput-p.ads, gnatcmd.adb,
gnatname.adb, makeutl.ads, makeutl.adb, makegpr.adb, mlib-tgt-vms.adb
mlib-tgt-darwin.adb, mlib-tgt-lynxos.adb, mlib-prj.adb, mlib-tgt.adb,
mlib-tgt.ads, mlib-tgt-irix.adb mlib-tgt-hpux.adb, mlib-tgt-linux.adb,
mlib-tgt-solaris.adb, mlib-tgt-vms-alpha.adb, mlib-tgt-vms-ia64.adb,
mlib-tgt-mingw.adb, mlib-tgt-vxworks.adb, mlib-tgt-aix.adb,
mlib-tgt-tru64.adb, mlib.ads, mlib.adb (Create_Sym_Links): New
procedure.
(Major_Id_Name): New function.
mlib-tgt.ads/mlib.tgt.adb:
(Library_Major_Minor_Id_Supported): New function, default returns True
Most mlib-tgt-*.adb that support shared libraries and symbolic links:
(Build_Dynamic_Library): Add support for major/minor ids for shared libs
Other mlib-tgt-*.adb (aix, mingw, vms, vxworks, xi):
Implementation of Library_Major_Minor_Id_Supported returns False
clean.adb:
(Clean_Library_Directory): If major/minor ids are supported, clean all
library files.
Major update of the Project Manager and of the project aware tools,
including gprmake, so that the same sources in the GNAT repository
can be used by gprbuild.
2007-08-14 Olivier Hainque <hainque@adacore.com>
* system-solaris-x86.ads (ZCX_By_Default): Switch to True.
(GCC_ZCX_Support): Switch to True.
* s-intman-solaris.adb (Notify_Exception): Call
Adjust_Context_For_Raise before raising, as expected for signal
handlers in general.
* s-intman-posix.adb (Notify_Exception): Remove declaration of
Adjust_Context_For_Raise, moved to the spec of this unit to be visible
to other implementation bodies.
* s-intman.ads (Adjust_Context_For_Raise): Declare and import here, to
be visible by multiple implementation bodies.
* init.c [VMS section] (__gnat_handle_vms_condition): Adjust context
only for conditions coming from hardware.
[alpha-tru64 section] (__gnat_adjust_context_for_raise): Implement,
adjustments to signal context prior to exception raise from signal
handler.
(__gnat_map_signal for VxWorks): Map SIGSEGV to Storage_Error in RTP
mode.
Solaris section: (__gnat_adjust_context_for_raise): New function.
Implementation of the machine context adjustments to perform prior to
raise from a signal handler. Version for both sparc and x86.
(HAVE_GNAT_ADJUST_CONTEXT_FOR_RAISE): Define.
(__gnat_error_handler): Expect a third argument, ucontext_t *. Adjust it
prior to raising as expected for any handler, before possible nested
faults to make sure all the contexts in a chain have been adjusted by
the time we propagate.
2007-08-14 Pascal Obry <obry@adacore.com>
* s-osinte-mingw.ads: Add support for Ada.Execution_Time on Windows.
(SYSTEM_INFO): New record.
(SetThreadIdealProcessor): New imported routine needed for supporting
task_info pragma on Windows.
* s-taprop-mingw.adb (Enter_Task): Check if CPU number given in task
info can be applied to the current host.
(Create_Task): Set the ideal processor if information is present.
* s-tasinf-mingw.adb, s-tasinf-mingw.ads,
a-exetim-mingw.adb, a-exetim-mingw.ads: New files.
2007-08-14 Olivier Hainque <hainque@adacore.com>
* s-taprop-linux.adb (Get_Stack_Attributes): New subprogram. Fetch the
stack size and initial stack pointer value for a given task.
(Enter_Task): Get the stack attributes of the task we are entering and
let the stack checking engine know about them.
* s-stchop.adb, s-stchop.ads (Notify_Stack_Attributes): New subprogram.
Let the stack-checking engine know about the initial sp value and stack
size associated with the current task.
(Set_Stack_Info): If a stack base has been notified for the current
task, honor it. Fallback to the previous less accurate method otherwise.
* s-stchop-vxworks.adb (Notify_Stack_Attributes): Dummy body.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
* sem_ch10.adb: Create a limited view of an incomplete type, to make
treatment of limited views uniform for all visible declarations in a
limited_withed package.
Set flag indicating that a subprogram body for a child unit has a
generated spec.
(Analyze_Compilation_Unit): If unit is a subprogram body that has no
separate declaration, remove the unit name from visibility after
compilation, so that environment is clean for subsequent compilations.
(Install_Limited_Context_Clauses): Do not install a
limited_private_with_clause unless the current unit is a body or a
private child unit.
(Analyze_Subunit, Install_Parents): Treat generic and non-generic units
in the same fashion.
(Install_Limited_Withed_Unit): Do not install a limited with clause if
it applies to the declaration of the current package body.
(Remove_Private_With_Clauses): If there is a regular with_clause for
the unit, delete Private_With_Clause from context, to prevent improper
hiding when processing subsequent nested packages and instantiations.
2007-08-14 Jose Ruiz <ruiz@adacore.com>
* adaint.c (__gnat_is_absolute_path): For VxWorks systems we accept
dir/file, device:/dir/file, and device:drive_letter:/dir/file as
representing absolute path names.
__gnat_set_file_time_name [VMS]: Fix some 64/32 bit issues.
* cstreams.c (__gnat_full_name for VxWorks): Use
__gnat_is_absolute_path to detect whether we need to add the current
directory to normalize the path.
2007-08-14 Javier Miranda <miranda@adacore.com>
* a-tags.ads,
a-tags.adb (Displace): Associate a message with the raised CE
exception.
(To_Addr_Ptr, To_Address, To_Dispatch_Table_Ptr,
To_Object_Specific_Data_Ptr To_Predef_Prims_Ptr,
To_Tag_Ptr, To_Type_Specific_Data_Ptr): Moved here from the package
spec.
(Default_Prim_Op_Count): Removed.
(IW_Membership, Get_Entry_Index, Get_Offset_Index, Get_Prim_Op_Kind,
Register_Tag, Set_Entry_Index, Set_Offset_To_Top, Set_Prim_Op_Kind):
Remove pragma Inline_Always.
* rtsfind.ads (Default_Prim_Op_Count): Removed
(Max_Predef_Prims): New entity
(RE_Expanded_Name): Removed
(RE_HT_Link): Removed
(RE_Iface_Tag): Remmoved
(RE_Ifaces_Table): Removed
(RE_Interfaces_Array): Removed
(RE_Interface_Data_Element): Removed
(RE_Nb_Ifaces): Removed
(RE_RC_Offset): Removed
(RE_Static_Offset_To_Top): Removed
* exp_atag.ads, exp_atag.adb (Build_Inherit_Prims): Addition of a new
formal.
(Build_Inherit_Predefined_Prims): Replace occurrences of Default_
Prim_Op_Count by Max_Predef_Prims.
2007-08-14 Thomas Quinot <quinot@adacore.com>
Vincent Celier <celier@adacore.com>
* binde.adb (Elab_All_Links): Remove unnecessary call to
Generic_Separately_Compiled (if a unit satisfies this predicate, there
won't be an associated Afile).
(Elab_All_Links): Fail if a referenced unit cannot be found
* bindgen.adb:
Fix comments in bindgen regarding consistency checks done in Bcheck:
the checks are made across units within a partition, not across several
partitions.
Fix generation of C binder file for VxWorks.
* lib.ads, lib.adb (Generic_Separately_Compiled): Rename to
Generic_May_Lack_ALI, more descriptive of the current use of the
predicate, and update documentation.
* lib-writ.ads, lib-writ.adb (Write_With_Lines): Minor code
reorganization and documentation update for the case of predefined
library generics (for which we do not reference an Afile).
2007-08-14 Robert Dewar <dewar@adacore.com>
* s-intman-irix.adb, s-osinte-irix.adb, s-osinte-irix.ads,
s-proinf-irix-athread.ads, s-osinte-hpux-dce.adb, s-osinte-hpux-dce.ads,
s-parame-hpux.ads, s-intman-dummy.adb, s-tasinf-solaris.adb,
s-tasinf-solaris.ads, s-asthan-vms-alpha.adb, s-inmaop-vms.adb,
s-intman-vms.adb, s-intman-vms.ads, s-osprim-mingw.adb,
s-parame-vms-restrict.ads, s-parame-ae653.ads, s-intman-vxworks.ads,
s-intman-vxworks.ads, s-intman-vxworks.adb, s-parame-vxworks.ads,
s-tfsetr-vxworks.adb, s-interr.adb, s-interr.ads, a-tasatt.adb,
exp_ch13.adb, s-htable.ads, s-imgboo.ads, s-imglli.ads, s-imgllu.ads,
s-imguns.ads, g-eacodu.adb, par-ch12.adb, s-stache.ads, s-stausa.adb,
s-poosiz.adb, s-parame.ads, s-mastop.ads, s-osinte-darwin.ads,
a-chtgke.adb, s-asthan-vms-alpha.adb, s-parame-vms-alpha.ads,
s-parame-vms-ia64.ads, s-parame-vxworks.adb, s-except.ads,
g-altcon.adb: Minor reformatting
ada-tree.h: Delete empty line.
ali.ads: Minor reformatting
Clarification of comments.
Minor spelling correction
* exp_dbug.adb: Add Warnings Off to suppress new warning
* a-witeio.adb (Write): Add Warnings (Off) for unneeded IN OUT mode
formal
* a-strunb.adb (Set_Unbounded_String): Avoid memory leak by freeing old
value
* a-textio.adb (Write): Remove an unnecessary IN OUT mode from
* a-textio.ads: Reorder the standard input/output/error declarations
for consistency.
* g-dirope.adb, g-dirope.ads: Change Dir to mode IN for Open call
* par-ch2.adb: Recognize RM specially in errout
Change 'R'M to RM in all error messages
* scng.adb: Recognize RM specially in errout
* sem.ads, sem.adb, exp_strm.adb, exp_ch5.ads, expander.adb: Rename
N_Return node to be N_Simple_Return, to reflect Ada 2005 terminology.
* s-direio.adb: Add missing routine header box.
* sem_attr.ads: Add ??? comments
* sem_eval.adb: Recognize RM specially in errout
Change 'R'M to RM in all error messages
* sem_maps.adb, sem_maps.ads: Remove some unnecessary IN OUT modes
* s-tasinf.ads: Fix minor comment typo.
* a-cihama.adb: Minor comment addition
* a-ztexio.adb (Write): Add Warnings (Off) for unneeded IN OUT mode
formal
* s-tasinf-tru64.ads: Fix minor comment typo.
* itypes.ads: Comment update.
* ali-util.adb: Remove Generic_Separately_Compiled guard, not needed
anymore.
* argv.c: Added protection against null gnat_argv and gnat_envp.
* bcheck.adb (Check_Consistency): Use correct markup character ({) in
warning message when Tolerate_Consistency_Errors is True.
* cstand.adb (Create_Standard): Do not call Init_Size_Alignment for
Any_Id, as this subprogram is only applicable to *type* entities (it
sets RM_Size). Instead initialize just Esize and Alignment.
2007-08-14 Bob Duff <duff@adacore.com>
* a-cihama.ads, a-cidlli.ads, a-chtgop.ads, a-chtgop.adb, a-cdlili.ads,
a-cihase.adb, a-cihase.ads, a-cohase.adb, a-cohase.ads, a-ciorma.ads,
a-coorma.ads, a-ciormu.ads, a-coormu.ads, a-ciorse.ads, a-cohama.ads,
a-cohata.ads, a-convec.adb, a-coinve.ads, a-coinve.adb, a-convec.ads,
a-coorse.ads (Next): Applied pragma Inline.
Make all Containers packages Remote_Types (unless they are already
Pure).
(Previous): applied pragma Inline
(Elements_Type): is now a record instead of an array
2007-08-14 Thomas Quinot <quinot@adacore.com>
* table.adb, g-table.adb, g-dyntab.adb (Append): Reimplement in terms
of Set_Item.
(Set_Item): When the new item is an element of the currently allocated
table passed by reference, save a copy on the stack if we're going
to reallocate. Also, in Table.Set_Item, make sure we test the proper
variable to determine whether to call Set_Last.
* sinput-d.adb, sinput-l.adb, stringt.adb, switch-m.adb,
symbols-vms.adb, symbols-processing-vms-alpha.adb,
symbols-processing-vms-ia64.adb, sem_elab.adb, repinfo.adb: Replace
some occurrences of the pattern
T.Increment_Last;
T.Table (T.Last) := Value;
with a cleaner call to
T.Append (Value);
2007-08-14 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
Thomas Quinot <quinot@adacore.com>
* sem_ch12.ads, sem_ch12.adb (Instantiate_Type): If the formal is a
derived type with interface progenitors use the analyzed formal as the
parent of the actual, to create renamings for all the inherited
operations in Derive_Subprograms.
(Collect_Previous_Instances): new procedure within of
Load_Parent_Of_Generic, to instantiate all bodies in the compilation
unit being loaded, to ensure that the generation of global symbols is
consistent in different compilation modes.
(Is_Tagged_Ancestor): New function testing the ancestor relation that
takes progenitor types into account.
(Validate_Derived_Type_Instance): Enforce the rule of 3.9.3(9) by
traversing over the primitives of the formal and actual types to locate
any abstract subprograms of the actual type that correspond to a
nonabstract subprogram of the formal type's ancestor type(s), and issue
an error if such is found.
(Analyze_Package_Instantiation, Analyze_Subprogram_Instantiation,
Instantiate_Package_Body, Instantiate_Subprogram_Body):
Remove bogus guard around calls to Inherit_Context.
(Reset_Entity): If the entity is the selector of a selected component
that denotes a named number, propagate constant-folding to the generic
template only if the named number is global to the generic unit.
(Set_Instance_Env): Only reset the compilation switches when compiling
a predefined or internal unit.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
* sem_ch4.adb (Try_Class_Wide_Operation): use base type of first
parameter to determine whether operation applies to the prefix.
(Complete_Object_Operation): If actual has an access type and
controlling formal is not an in_parameter, reject the actual if it is
an access_to_constant type.
(Try_Primitive_Operation): If the type of the prefix is a formal tagged
type, the candidate operations are found in the scope of declaration of
the type, because the type has no primitive subprograms.
(Analyze_Selected_Component): If prefix is class-wide, and root type is
a private extension, only examine visible components before trying to
analyze as a prefixed call.
Change Entity_List to Type_To_Use, for better readability.
(Has_Fixed_Op): Use base type when checking whether the type of an
operator has a user-defined multiplication/division
(Check_Arithmetic_Pair): Use Ada 2005 rules to remove ambiguities when
user-defined operators are available for fixed-point types.
2007-08-14 Thomas Quinot <quinot@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_cat.ads, sem_cat.adb (Has_Stream_Attribute_Definition): New
formal At_Any_Place indicating, when True, that we want to test for
availability of the stream attribute at any place (as opposed to the
current visibility context only).
(Missing_Read_Write_Attributes): A stream attribute is missing for the
purpose of enforcing E.2.2(8) only if it is not available at any place.
Take into account the Ada2005 pragma Has_Preelaborable_Initialization
when checking the legality of an extension aggregate in a preelaborable
package. Treat the literal null as a valid default expression in a
component declaration for a type with preelaborable initialization.
A limited interface is a legal progenitor for the designated type of a
remote access to class-wide type.
2007-08-14 Thomas Quinot <quinot@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch8.ads, sem_ch8.adb (Find_Type, case of a 'Base attribute
reference): Use correct entity as denoted entity for the selector of
the rewritten node.
(Find_Direct_Name): Add comment about Generate_Reference incorrectly
setting the Referenced_As_LHS flag for entities that are implicitly
dereferenced.
(Find_Type): If the type is an internally generated incomplete type,
mark the full view as referenced, to prevent spurious warnings.
(Find_Selected_Component, Has_Components): Handle properly non-limited
views that are themselves incomplete types.
Handle interfaces visible through limited-with clauses.
(Analyze_Subprogram_Renaming): Disambiguate and set the entity of a
subprogram generic actual for which we have generated a renaming.
Warn when the renaming introduces a homonym of
the renamed entity, and the renamed entity is directly visible.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
* sem_res.adb (Resolve_Allocator): Propagate any coextensions that
appear in the subtree to the current allocator if it is not a static
coextension.
(Resolve_Allocator): Perform cleanup if resolution has determined that
the allocator is not a coextension.
(Resolve): Skip an interpretation hidden by an abstract operator only
when the type of the interpretation matches that of the context.
(Resolve): When looping through all possible interpretations of a node,
do not consider those that are hidden by abstract operators.
(Resolve_Actuals): When verifying that an access to class-wide object
is an actual for a controlling formal, ignore anonymous access to
subprograms whose return type is an access to class_wide type.
(Resolve_Slice): If the prefix of the slice is a selected component
whose type depends on discriminants, build its actual subtype before
applying range checks on the bounds of the slice.
(Valid_Conversion): In an instance or inlined body, compare root types,
to prevent anomalies between private and public views.
(Resolve): Improve error message for ambiguous fixed multiplication
expressions that involve universal_fixed multiplying operations.
2007-08-14 Javier Miranda <miranda@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
* exp_ch9.adb (Build_Protected_Entry): Propagate the original source
location to allow the correct generation of errors in case of
restrictions applied to the expanded code.
(Expand_Entry_Barrier): Remove all generated renamings for a barrier
function if the condition does not reference them.
(Expand_Entry_Body_Declarations): Mark the index constant as having a
valid value.
2007-08-14 Thomas Quinot <quinot@adacore.com>
Pablo Oliveira <oliveira@adacore.com>
* exp_dist.adb (PolyORB_Support.Build_TypeCode_Function): When creating
typecode parameters for a union (in a variant record), remove
extraneous layer of Any wrapping for member label.
(Expand_Receiving_Stubs_Bodies): For an RCI package body that has
elabration statements, register the package with the name server
at the beginning, not at the end, of the elaboration statements so
that they can create remote access to subprogram values that designate
remote subprograms from the package.
2007-08-14 Hristian Kirtchev <kirtchev@adacore.com>
* g-catiio.adb (Image): For the case of %s, use Ada.Calendar.Time
values to compute the number of seconds since the Unix Epoc in order to
account for Daylight Savings Time. Perform special processing for dates
that are earlier than the Unix Epoc to obtain a negative number.
2007-08-14 Emmanuel Briot <briot@adacore.com>
* g-comlin.adb (Getopt): Fix handling of "*" switch when not collapsing
switches.
2007-08-14 Eric Botcazou <ebotcazou@adacore.com>
* gnatlink.adb (Gnatlink): Pass switches to the linker even if the
binder-generated file is not in Ada.
Pass -mrtp to the linker if it is GCC and --RTS=rtp has been
recorded in the ALI file.
Pass -fsjlj to the linker if it is GCC and --RTS=sjlj has been recorded.
2007-08-14 Vincent Celier <celier@adacore.com>
* gnatls.adb: (Corresponding_Sdep_Entry): Always return a value
(Output_Source): Do nothing if parameter is No_Sdep_Id
* make.adb (Gnatmake): Do not rebuild an archive simply because a
shared library it imports has a later time stamp.
(Check): Resolve the symbolic links in the path name of the object
directory.
Check that the ALI file is in the correct object directory
Check if a file name does not correspond to the mapping of units
to file names.
(Display_Version): New procedure
(Initialize): Process switches --version and --help
Use type Path_Name_Type for path name
2007-08-14 Paul Hilfinger <hilfinger@adacore.com>
* impunit.adb: Re-organize System.Random_Numbers and
GNAT.Random_Numbers and add to builds.
* Makefile.rtl: Add s-rannum.ad* and g-rannum.ad*, a-assert*
* s-rannum.ads, s-rannum.adb, g-rannum.ads, g-rannum.adb: New files.
* a-assert.ads, a-assert.adb: New files.
2007-08-14 Gary Dismukes <dismukes@adacore.com>
* layout.adb (Layout_Type): In the case of access-to-subprogram types,
if AAMP_On_Target is True, then the size of the type encompasses two
addresses (a static link and a subprogram address), except in the case
of library-level access types.
2007-08-14 Vincent Celier <celier@adacore.com>
* output.ads, output.adb (Write_Eol): Remove trailing spaces before
writing the line.
(Write_Eol_Keep_Blanks): New procedure to write a line, including
possible trailing spaces.
(Output_Source_Line): Call Write_Eol_Keep_Blanks to output a source line
2007-08-14 Javier Miranda <miranda@adacore.com>
* par-ch6.adb (P_Formal_Part): Fix wrong error message associated with
null-excluding access types.
2007-08-14 Javier Miranda <miranda@adacore.com>
* sem_ch9.adb (Check_Interfaces): New subprogram that factorizes code
that is common to Analyze_Protected_Type and Analyze_Task_Type. In case
of private types add missing check on matching interfaces in the
partial and full declarations.
(Analyze_Protected_Type): Code cleanup.
(Analyze_Task_Type): Code cleanup.
2007-08-14 Javier Miranda <miranda@adacore.com>
* sem_disp.adb (Check_Dispatching_Operation): Do not emit warning on a
generated interface thunk.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
* s-ficobl.ads: Declare AFCB as a tagged incomplete type, to prevent
obsolescent warning on application of 'Class to an incomplete type.
* s-finroo.ads: Declare Root_Controlled as a tagged incomplete type, to
prevent obsolescent warning on application of 'Class to an incomplete
type.
2007-08-14 Pascal Obry <obry@adacore.com>
* s-fileio.adb (Is_Open): Add check for usability of the underlying
file stream.
2007-08-14 Cyrille Comar <comar@adacore.com>
* s-finimp.adb (Detach_From_Final_List): make this procedure idempotent
since it is potentially used in cases implying double finalization of
the same object.
2007-08-14 Jose Ruiz <ruiz@adacore.com>
* s-tasini.adb (Get_Stack_Info): Move this function to
System.Soft_Links.Tasking because it is common to the full and the
restricted run times.
(Init_RTS): Do not set the Get_Stack_Info soft link because it is done
in SSL.Tasking.Init_Tasking_Soft_Links.
* s-solita.adb (Get_Stack_Info): Function moved from
System.Tasking.Initialization because it is common to the full and the
restricted run times.
(Init_Tasking_Soft_Links): Set the tasking soft link for Get_Stack_Info.
2007-08-14 Arnaud Charlet <charlet@adacore.com>
* s-tpobop.ads, s-tpobop.adb, s-tasren.ads, s-tasren.adb,
s-taskin.ads (Requeue_With_Abort): Rename field With_Abort.
(PO_Do_Or_Queue, Task_Do_Or_Queue, Requeue_Call): Remove With_Abort
parameter.
* s-tassta.adb (Task_Wrapper): Increased value of the small overflow
guard to 12K.
2007-08-14 Gary Dismukes <dismukes@adacore.com>
* s-veboop.adb (SU): New named number initialized to
System.Storage_Unit.
(True_Val): The initialization expression is revised to use SU (=
Storage_Unit) rather than assuming 8 for the component size of an
unpacked Boolean array.
2007-08-14 Tristan Gingold <gingold@adacore.com>
* tracebak.c: Use tb-ivms.c on OpenVMS Itanium.
* tb-ivms.c: New file.
* g-trasym-vms-ia64.adb: Fixed for OpenVMS version 8.2
2007-08-14 Geert Bosch <bosch@adacore.com>
* i-forbla.ads, i-forbla.adb, a-ngcoar.adb, a-ngcoar.ads, i-forlap.ads,
s-gearop.adb, s-gecobl.adb, s-gecobl.ads, s-gerela.adb, s-gerela.ads:
Add required linker pragmas for automatically linking with the gnalasup
linear algebra support library, and the systems math library.
Rename cdot to cdotu and zdot to zdotu.
Update header comment to describe purpose of package.
2007-08-14 Thomas Quinot <quinot@adacore.com>
* exp_ch7.adb (Find_Final_List): For an anonymous access type that has
an explicitly specified Associated_Final_Chain, use that list.
(Expand_N_Package_Body): Build dispatch tables of library level tagged
types.
(Expand_N_Package_Declaration): Build dispatch tables of library level
tagged types. Minor code cleanup.
2007-08-14 Vincent Celier <celier@adacore.com>
* gnatchop.adb (Terminate_Program): Remove exception and use
Types.Terminate_Program instead.
* osint.ads, osint.adb (Current_Exit_Status): New global variable
(Find_Program_Name): Added protection against empty name.
(OS_Exit_Through_Exception): New procedure
* s-os_lib.ads, s-os_lib.adb (OS_Exit): New procedure body
(OS_Exit_Default): New procedure that contains the previous
implementation of procedure OS_Exit.
(Final_Value): Remove obsolete Interix stuff.
2007-08-14 Thomas Quinot <quinot@adacore.com>
* g-socket.ads: Reorganize example code so that it also works on
Windows XP.
2007-08-14 Tristan Gingold <gingold@adacore.com>
* g-trasym.ads: AIX now supports symbolic backtraces.
2007-08-14 Ed Schonberg <schonberg@adacore.com>
* lib-load.adb (From_Limited_With_Chain): Always scan the stack of
units being loaded to detect circularities. A circularity may be
present even if the current chain of pending units to load starts from
a limited_with_clause.
* lib-load.ads: Change profile of Load_Unit to use a with_clause
rather than a boolean flag, in order to detect circularities in
with_clauses.
* par-load.adb: Use current with_clause in calls to Load_Unit, rather
than propagating the From_Limited_With flag, in order to handle
properly circularities involving with_clauses.
2007-08-14 Nicolas Setton <setton@adacore.com>
* link.c (FreeBSD): Add "const" keyword where needed, to eliminate
warnings.
2007-08-14 Arnaud Charlet <charlet@adacore.com>
* Makefile.in: GNATRTL_LINEARALGEBRA_OBJS: New variable holding objects
to build for libgnala.
libgnat: Add rules to build libgnala.a
(LIBGNAT_TARGET_PAIRS for VxWorks): Remove s-osinte-vxworks.adb from
target pairs of the VxWorks 6 kernel runtime, use it only for VxWorks 5.
Add s-osinte-vxworks-kernel.adb to the target pairs of the
kernel run-time lib for VxWorks 6, which would provide a different
implementation for Task_Cont and Task_Stop than the VxWorks 5 version.
x86-solaris section (EH_MECHANISM): Set to -gcc, as this port is now
running ZCX by default.
Add g-sttsne-locking to LynxOS version.
Remove g-sttsne-vxworks.ads; use g-sttsne-locking.ads instead.
On x86/darwin, use a-numaux-x86.ad? and system-darwin-x86.ads.
* system-darwin-x86.ads: New file.
* Make-lang.in: Delete files before copying onto them, so if they are
read-only, the copy won't fail.
Update dependencies
2007-08-14 Pascal Obry <obry@adacore.com>
* mdll-fil.adb, * mdll.adb: Implement a more consistent libraries
naming scheme.
2007-08-14 Vincent Celier <celier@adacore.com>
* mlib-utl.adb (Gcc_Name): Change from constant String to String_Access
(Gcc): Initialize Gcc_Name at the first call
2007-08-14 Ed Schonberg <schonberg@adacore.com>
* sem_ch7.adb (Analyze_Package_Specification): Do not install private
with_clauses of the enclosing unit when analyzing the package
specification of a nested instance.
2007-08-14 Hristian Kirtchev <kirtchev@adacore.com>
* sinfo.ads, sinfo.adb (Is_Coextension, Set_Is_Coextension): Removed.
(Is_Dynamic_Coextension, Set_Is_Dynamic_Coextension): New routines.
Remove flag Is_Coextension. Add flag Is_Dynamic_Coextension. Update the
layout of N_Allocator.
2007-08-14 Thomas Quinot <quinot@adacore.com>
* rtsfind.adb (Check_RPC): Add PCS version check.
* gnatvsn.ads, gnatvsn.adb: Add PCS version.
(Gnat_Free_Software): New function.
* sem_dist.ads, sem_dist.adb (Get_PCS_Version): New subprogram. Returns
the PCS_Version value from s-parint, used to check that it is consistent
with what exp_dist expects.
* s-parint.ads (PCS_Version): New entity for checking consistency
between exp_dist and PCS.
* gen-soccon.c: (SO_REUSEPORT): New constant.
2007-08-14 Hristian Kirtchev <kirtchev@adacore.com>
* a-calfor.adb (Image (Duration; Boolean)): Change type of local
variable Sub_Second to Duration in order to accomodate a larger range
of arithmetic operations.
2007-08-14 Bob Duff <duff@adacore.com>
* g-sttsne-locking.ads: Move comments from spec to body.
* g-sttsne-locking.adb: Move comments from spec to body.
* g-sttsne-vxworks.ads: Removed.
* g-sttsne-vxworks.adb: Removed.
2007-08-11 Ian Lance Taylor <iant@google.com>
* misc.c (gnat_get_alias_set): Change return type to
alias_set_type.
2007-08-11 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* decl.c, utils2.c: Fix whitespace in last change.
2007-08-11 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* decl.c (compare_field_bitpos): Constify.
* utils2.c (compare_elmt_bitpos): Likewise.
2007-07-27 Aurelien Jarno <aurelien@aurel32.net>
* s-osinte-kfreebsd-gnu.ads ((sigset_t_ptr): Removed, replaced by
anonymous access type.
(pthread_sigmask): Now take an access sigset_t.
2007-07-05 Joel Sherrill <joel.sherrill@oarcorp.com>
* s-osinte-rtems.ads: Correct prototype of pthread_sigmask.
2007-06-21 Eric Botcazou <ebotcazou@adacore.com>
PR tree-optimization/25737
* misc.c (gnat_post_options): Do not force flag_tree_salias to 0.
2007-06-15 Andrew Pinski <andrew_pinski@playstation.sony.com>
* trans.c (Attribute_to_gnu): When subtracting an
offset from a pointer, use POINTER_PLUS_EXPR with
NEGATE_EXPR instead of MINUS_EXPR.
(gnat_to_gnu): Likewise.
* utils.c (convert): When converting between
thin pointers, use POINTER_PLUS_EXPR and sizetype
for the offset.
* utils2.c (known_alignment): POINTER_PLUS_EXPR
have the same semantics as PLUS_EXPR for alignment.
(build_binary_op): Add support for the semantics of
POINTER_PLUS_EXPR's operands.
When adding an offset to a pointer, use POINTER_PLUS_EXPR.
2007-06-11 Rafael Ávila de Espíndola <espindola@google.com>
* trans.c (Attribute_to_gnu): Use signed_or_unsigned_type_for instead
of get_signed_or_unsigned_type.
* misc.c (LANG_HOOKS_SIGNED_TYPE): Remove.
2007-06-11 Bob Duff <duff@adacore.com>
Thomas Quinot <quinot@adacore.com>
* g-stsifd-sockets.adb (Create): Work around strange behavior of
'bind' on windows that causes 'connect' to fail intermittently, by
retrying the 'bind'.
(GNAT.Sockets.Thin.Signalling_Fds): New procedure Close.
2007-06-10 Duncan Sands <baldrick@free.fr>
* decl.c (gnat_to_gnu_entity): Use pointers to dummy nodes, rather
than to void, for the fields when making a new fat pointer type.
(gnat_substitute_in_type): Now substitute_in_type.
* gigi.h (gnat_substitute_in_type): Likewise. Adjust recursive calls.
* trans.c (gnat_gimplify_expr): Remove COMPONENT_REF kludge.
* utils.c (update_pointer_to): Update fat pointers by updating the
dummy node pointers used for the fields.
2007-06-06 Thomas Quinot <quinot@adacore.com>
Bob Duff <duff@adacore.com>
* g-soccon-freebsd.ads, g-soccon-vxworks.ads:,
g-soccon-aix.ads, g-soccon-irix.ads, g-soccon-hpux.ads,
g-soccon-solaris.ads, g-soccon-vms.ads, g-soccon-tru64.ads: Add new
constant Thread_Blocking_IO, always True by default, set False
on a per-runtime basis.
(Need_Netdb_Buffer): New constant.
* g-stheme.adb, g-sttsne.ads, g-sttsne-locking.ads,
g-sttsne-locking.adb, g-sttsne-vxworks.ads, g-sttsne-vxworks.adb: New
files.
* g-socthi-vxworks.ads, g-socthi-vxworks.adb,
g-socthi-vms.ads, g-socthi-vms.adb (Safe_Gethostbyname,
Safe_Gethostbyaddr, Safe_Getservbyname, Safe_Getservbyport): Use new
child package Task_Safe_NetDB
(Host_Error_Messages): Add stub body.
(GNAT.Sockets.Thin.Signalling_Fds): New procedure Close.
* g-soccon-mingw.ads: Add Windows-specific constants.
(Need_Netdb_Buffer): New constant.
(GNAT.Sockets.Thin.C_Inet_Addr, Windows version): Remove useless Ada
wrapper and import inet_addr(3) from the standard sockets library
directly instead.
(In_Addr): Add alignment clause.
(GNAT.Sockets.Thin.Signalling_Fds): New procedure Close.
2007-06-06 Robert Dewar <dewar@adacore.com>
* a-taster.adb, s-osinte-hpux.ads, s-osinte-solaris-posix.ads,
s-osinte-irix.ads, s-interr-sigaction.adb, s-mastop-irix.adb,
s-osinte-hpux-dce.ads, s-osinte-interix.ads, s-osinte-solaris.ads,
s-taspri-solaris.ads, s-inmaop-vms.adb, s-interr-vms.adb,
s-mastop-vms.adb, s-osinte-vms.ads, s-tpopde-vms.adb,
s-osinte-mingw.ads, s-interr-vxworks.adb, i-cstrea-vms.adb,
a-diocst.adb, a-direio.adb, a-interr.adb, a-sequio.adb, a-siocst.adb,
a-ssicst.adb, a-storio.adb, a-ststio.adb, a-stwima.adb, a-tasatt.adb,
a-taside.adb, a-tiocst.adb, a-witeio.adb, a-wtcstr.adb, g-crc32.adb,
g-dirope.adb, g-dyntab.adb, g-memdum.adb, g-regexp.adb, g-spipat.adb,
g-spitbo.adb, g-string.adb, g-string.ads, g-table.adb, g-thread.adb,
i-cobol.adb, i-cpoint.adb, i-cstrea.adb, i-cstrin.adb, i-pacdec.adb,
s-addima.adb, s-arit64.adb, s-auxdec.adb, s-auxdec.ads,
s-auxdec-vms_64.ads, s-carsi8.adb, s-carun8.adb, s-casi16.adb,
s-casi32.adb, s-casi64.adb, s-caun16.adb, s-caun32.adb, s-caun64.adb,
s-direio.adb, s-fileio.adb, s-finimp.ads, s-geveop.adb, s-imgenu.adb,
s-pack03.adb, s-pack05.adb, s-pack06.adb, s-pack07.adb, s-pack09.adb,
s-pack10.adb, s-pack11.adb, s-pack12.adb, s-pack13.adb, s-pack14.adb,
s-pack15.adb, s-pack17.adb, s-pack18.adb, s-pack19.adb, s-pack20.adb,
s-pack21.adb, s-pack22.adb, s-pack23.adb, s-pack24.adb, s-pack25.adb,
s-pack26.adb, s-pack27.adb, s-pack28.adb, s-pack29.adb, s-pack30.adb,
s-pack31.adb, s-pack33.adb, s-pack34.adb, s-pack35.adb, s-pack36.adb,
s-pack37.adb, s-pack38.adb, s-pack39.adb, s-pack40.adb, s-pack41.adb,
s-pack42.adb, s-pack43.adb, s-pack44.adb, s-pack45.adb, s-pack46.adb,
s-pack47.adb, s-pack48.adb, s-pack49.adb, s-pack50.adb, s-pack51.adb,
s-pack52.adb, s-pack53.adb, s-pack54.adb, s-pack55.adb, s-pack56.adb,
s-pack57.adb, s-pack58.adb, s-pack59.adb, s-pack60.adb, s-pack61.adb,
s-pack62.adb, s-pack63.adb, s-pooloc.adb, s-poosiz.adb, s-scaval.adb,
s-sequio.adb, s-shasto.adb, s-stalib.ads, s-stratt.adb, s-strcom.adb,
s-taasde.adb, s-tasdeb.adb, s-tasuti.ads, s-tataat.ads, s-tpoben.ads,
s-valenu.adb, s-widenu.adb, s-wwdenu.adb, s-addope.adb, a-stzmap.adb,
a-ztcstr.adb, a-ztexio.adb, s-osinte-linux-hppa.ads: Replace
Unchecked_* by Ada.Unchecked_*
2007-06-06 Robert Dewar <dewar@adacore.com>
* g-string.adb, s-proinf-irix-athread.adb, s-gloloc-mingw.adb,
s-tfsetr-default.adb, gnatfind.adb, gnatxref.adb, gprep.adb,
g-regexp.adb, g-regexp.ads, g-regpat.ads, g-tasloc.adb, g-tasloc.ads,
output.adb, switch-m.ads, tree_in.ads, tree_io.ads, indepsw.ads,
g-utf_32.adb, g-utf_32.ads, a-wichun.adb, a-wichun.ads, a-zchuni.adb,
a-zchuni.ads: Replace GNAT.xxx by System.xxx when appropriate.
* s-utf_32.adb, s-utf_32.ads, s-os_lib.adb, s-os_lib.ads, s-regexp.adb,
s-regexp.ads, s-regpat.adb, s-regpat.ads, s-string.adb, s-string.ads,
s-tasloc.adb, s-tasloc.ads: New files.
2007-06-06 Bob Duff <duff@adacore.com>
* g-expect-vms.adb:
(Send_Signal, Close): Raise Invalid_Process if the process id is invalid.
* g-expect.ads, g-expect.adb (Send): Avoid useless copy of the string.
(Send_Signal, Close): Raise Invalid_Process if the process id is
invalid.
(Pattern_Matcher_Access): Is now a general access type to be able to
use aliased string.
2007-06-06 Thomas Quinot <quinot@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* a-intnam-aix.ads: Adjust comment to account for SIGADAABORT change
(SIGEMT is now used instead of SIGTERM on AIX).
* s-osinte-aix.ads (Linker_Options): Use -pthread instead of -lpthreads.
(Time_Slice_Supported): Set to True.
Use SIGEMT instead of SIGTERM as SIGADAABORT.
2007-06-06 Hristian Kirtchev <kirtchev@adacore.com>
* a-calend.ads, a-calend.adb, a-calend-vms.ads, a-calend-vms.adb ("-"
(Time, Time)): Use To_Relative_Time rather than manual calculation to
express the bounds of Duration as Time. Raise Time_Error when the
result is greater or equal to the higher bound of Duration (on the
margin case).
("+" (Time, Duration)): Reorder code. Remove the declaration of constant
Ada_High_And_Leaps.
("-" (Time, Duration)): Reorder code. Remove the declaration of constant
Ada_High_And_Leaps.
("-" (Time, Time)): Reorder code.
(All_Leap_Seconds): Removed.
(Arithmetic_Operations.Add): Remove sign related kludge.
(Arithmetic_Operations.Difference): Control the leaps seconds processing
with flag Leap_Support.
(Arithmetic_Operations.Subtract): Remove sign related kludge.
(Check_Within_Time_Bounds): New procedure.
(Clock): Control the leap seconds processing with flag Leap_Support.
(Cumulative_Leap_Seconds): Assert that the target supports leap seconds.
(Formatting_Operations.Split): Control the leap seconds processing with
flag Leap_Support.
(Formatting_Operations.Time_Of): Control the leaps seconds processing
with flag Leap_Support. Adjust the year, month and day (if applicable)
when the value of day seconds designates a new day.
(Split): Use parameter associations for better readability. Integrate
flag Is_Ada_05.
(Time_Of): Use parameter associations for better readability. Integrate
flag Is_Ada_05.
* a-calfor.adb (Split): Use parameter associations for better
readability. Integrate flag Is_Ada_05.
(Time_Of): Remove flag Leap_Checks. Use parameter associations for
better readability. Integrate flag Is_Ada_05.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* s-taprop-vms.adb, s-taprop-hpux-dce.adb, s-taprop-vxworks.adb,
s-osprim-posix.adb, s-taprop-posix.adb, s-osprim-vxworks.adb,
s-taprop-solaris.adb, s-osprim-solaris.adb, s-taprop-dummy.adb,
s-osprim-unix.adb, s-osinte-freebsd.adb, s-osinte-freebsd.ads,
s-osinte-lynxos.adb, s-osinte-lynxos.ads, s-taprop-tru64.adb,
s-taprop-lynxos.adb, s-taprop-irix.adb, s-osinte-tru64.adb,
s-osinte-tru64.ads, s-taprop-linux.adb, s-parame.ads,
s-parame-vms-alpha.ads, s-parame-vms-ia64.ads, s-parame-hpux.ads,
s-parame-vms-restrict.ads, s-parame-ae653.ads, s-parame-vxworks.ads,
s-taprop-mingw.adb, s-osinte-lynxos-3.ads, s-osinte-lynxos-3.adb,
s-osprim-mingw.adb (Timed_Delay, Timed_Sleep): Register the base
time when entering this routine to detect a backward clock setting
(manual setting or DST adjustment), to avoid waiting for a longer delay
than needed.
(Time_Duration, To_Timeval, struct_timeval): Removed when not relevant.
Remove handling of deferred priority change, and replace by setting the
task priority directly, as required by AI-188.
Update comments.
(Max_Task_Image_Length): New constant.
Replace Warnings (Off) by Unreferenced pragma, cleaner.
(Dynamic_Priority_Support): Removed, no longer needed.
(Poll_Base_Priority_Change): Ditto.
(Set_Ceiling): Add this procedure to change the ceiling priority
associated to a lock. This is a dummy implementation because dynamic
priority ceilings are not supported by the underlying system.
* a-dynpri.adb (Set_Priority): Take into account case where Target is
accepting a RV with its priority boosted.
Remove handling of deferred priority change, and replace by setting the
task priority directly, as required by AI-188.
* s-taenca.adb (Try_To_Cancel_Entry_Call): Remove special case for
Succeeded = True.
Remove handling of deferred priority change, and replace by setting the
task priority directly, as required by AI-188.
(Wait_For_Completion, Wait_For_Call, Timed_Selective_Wait): Change state
of Self_Id earlier.
* s-tasini.ads, s-tasini.adb (Wakeup_Entry_Caller): Relax assertion.
(Poll_Base_Priority_Change): Removed.
Code clean up: use SSL.Current_Target_Exception.
* s-tasren.adb (Task_Count): Call Yield to let a chance to other tasks
to run as this is a potentially dispatching point.
(Call_Synchronous): Use Local_Defer_Abort.
(Callable): Relax assertion.
(Selective_Wait): Relax assertion in case abort is not allowed.
Remove handling of deferred priority change, and replace by setting the
task priority directly, as required by AI-188.
* s-tasuti.adb (Make_Passive): Adjust assertions.
Remove handling of deferred priority change, and replace by setting the
task priority directly, as required by AI-188.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* system-vxworks-sparcv9.ads, system-solaris-x86.ads,
system-irix-o32.ads, system-freebsd-x86.ads, system-lynxos-ppc.ads,
system-lynxos-x86.ads, system-vxworks-m68k.ads, system-linux-x86.ads,
system-vxworks-mips.ads, system-vxworks-alpha.ads,
system-vxworks-x86.ads, system-linux-ppc.ads, system-mingw.ads,
system-vms-zcx.ads, system-darwin-ppc.ads, system-vxworks-ppc.ads,
system-interix.ads, system-linux-hppa.ads, system-tru64.ads,
system-hpux.ads, system-irix-n32.ads, system-solaris-sparc.ads,
system-solaris-sparcv9.ads, system-vms.ads, system.ads,
system-vms_64.ads, system-hpux-ia64.ads, system-linux-x86_64.ads,
system-linux-ia64.ads: Document mapping between Ada and OS priorities.
This patch changes the largest non-binary modulus from 2**31-1 to
2**32-1.
(Compiler_System_Version): Removed, no longer used.
Clean up system files by removing flags only used on a single target.
Also remove obsolete flags, only used during bootstrap from system.ads
(Address): Add a pragma Preelaborable_Initialization.
* system-aix.ads: Ditto.
(GCC_ZCX_Support): Set to true.
Update priority range on AIX and map Ada priorities to target
priorities appropriately for different scheduling policies.
* ttypes.ads: set largest non-binary modulus from 2**31-1 to 2**32-1
2007-06-06 Vincent Celier <celier@adacore.com>
* mlib-tgt-specific.adb, mlib-tgt-specific.ads,
mlib-tgt-vms.adb, mlib-tgt-vms.ads: New files.
* mlib-tgt.adb, mlib-tgt.ads, mlib-tgt-darwin.adb,
mlib-tgt-vxworks.adb, mlib-tgt-mingw.adb, mlib-tgt-lynxos.adb,
mlib-tgt-linux.adb, mlib-tgt-solaris.adb, mlib-tgt-vms-alpha.adb,
mlib-tgt-vms-ia64.adb, mlib-tgt-aix.adb, mlib-tgt-irix.adb,
mlib-tgt-hpux.adb, mlib-tgt-tru64.adb: Make a common body for package
MLib.Tgt, containing the default versions of the exported subprograms.
For each platform, create a specific version of the body of new child
package MLib.Tgt.Specific that contains only the body of subprograms
that are different from the default.
(Archive_Builder_Append_Options): New function.
2007-06-06 Matthew Gingell <gingell@adacore.com>
* s-osinte-aix.adb: Map Ada priorities to target priorities
appropriately for different scheduling policies.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* s-osinte-linux.ads (sigset_t): Bump alignment to match more closely
its C counterpart.
Remove references to Unchecked_Conversion, and use Ada.xxx instead.
Replace Unchecked_Conversion by Ada.Unchecked_Conversion.
2007-06-06 Vasiliy Fofanov <fofanov@adacore.com>
* s-osprim-vms.ads, s-osprim-vms.adb (Initialize): New procedure.
Noop on VMS, added for interface commonality.
2007-06-06 Eric Botcazou <ebotcazou@adacore.com>
Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
Olivier Hainque <hainque@adacore.com>
* decl.c (gnat_to_gnu_entity) <object>: Manually mark the top of the
renamed expression of a full renaming at toplevel.
(gnat_to_gnu_entity, case object): If not defining, do not look inside
the values the constant is initialized to if it is an N_Allocator.
(gnat_to_gnu_entity) <E_Array_Subtype>: Manually mark the top of the
TYPE_SIZE_UNIT of inner types after the stride is elaborated.
(make_aligning_type): Accept an extra ROOM argument for storage to be
made available before the aligned field, and an extra BASE_ALIGN
argument for callers to pass the alignment guaranteed to be honored for
the whole aligning object. Avoid call to finish_record_type, which only
interferes with the sizes we want to set.
(gnat_to_gnu_entity) <E_Variable>: Pass the required extra arguments to
make_aligning_type for super-aligned objects on stack.
(components_to_record): Pass the adjusted size of the type when creating
fields in the qualified union for the variant part.
(gnat_substitute_in_type): Copy TYPE_USER_ALIGN.
(gnat_to_gnu_entity, case E_Signed_Integer_Subtype): Likewise for
packed array type.
(maybe_pad_type): Set TYPE_USER_ALIGN.
(make_aligning_type): Likewise.
ALIGN argument is unsigned int.
(gnat_to_gnu_entity, case E_Function): Back annotate return mechanism.
(gnat_to_gnu_param): Likewise, for parameters.
(gnat_to_gnu_entity) <object>: Always instantiate the renaming object
if it is constant and stems from a function call.
(gnat_to_gnu_entity) <E_Record_Type>: Set packed to -2 if the alignment
of the record is specified. Adjust accordingly.
(adjust_packed): New static function.
(gnat_to_gnu_field): Use it to adjust the packedness setting.
(components_to_record): Likewise.
(gnat_to_gnu_entity) <object>: Do not test the renamed expression for
side-effects if the object is deemed constant.
(gnat_to_gnu_entity) <E_Array_Type>: Create a name for the fat pointer
type instead of merely finalizing it. Tidy.
<E_Access_Subprogram_Type>: Retrieve the type from the TYPE_DECL.
<E_Access_Type>: Likewise.
(defer_debug_incomplete_list): Rename to defer_finalize_list.
(defer_debug_level): Delete.
(gnat_to_gnu_entity) <debug_deferred>: Likewise
<E_Array_Type>: Call rest_of_record_type_compilation on the fat pointer
type.
<E_Record_Type>: Do not explicitly defer finalizing the type.
Adjust for write_record_type_debug_info renaming.
<E_Subprogram_Type>: Likewise.
Finalize deferred types right after deferred incomplete types are
expanded.
(rest_of_type_decl_compilation): New global function.
(components_to_record): Rename defer_debug parameter to do_not_finalize.
(components_to_record): Propagate the packedness to the fields of the
qualified union type if there is a variant part.
(gnat_to_gnu_entity) <E_Array_Type>: Use new function
instead of inline code to adjust the XUT field offsets.
(gnat_to_gnu_entity): Adjust for new prototype of finish_record_type.
<E_Record_Subtype>: Do not let finish_record_type compute the sizes
and write the debug info if the type derives from a discriminated one.
(gnat_to_gnu_entity) <E_Array_Type>: Adjust call to create_index_type.
<E_Array_Subtype>: Likewise.
<E_String_Literal_Subtype>: Likewise.
(gnat_to_gnu_entity): Set TYPE_USER_ALIGN on types only if they have
an alignment clause.
(maybe_pad_type): Update ORIG_SIZE to the minimum required to meet ALIGN
before giving warning.
(prepend_one_attribute_to): New function, helper to prepend an attribute
to an attribute list.
(gnat_to_gnu_entity) <E_Procedure>: Use it.
(prepend_attributes): Likewise.
(gnat_to_gnu_entity) <E_Variable>: Use constants of the proper type.
<E_Array_Type>: Declare the padding type for the element type, if any.
<E_Array_Subtype>: Likewise.
(defer_limited_with): New variable.
(Gigi_Equivalent_Type): New function.
(gnat_to_gnu_entity): Use it at start and use result throughout.
(gnat_to_gnu_entity, case E_Access_Type): Rework to use
Gigi_Equivalent_Type, support Limited_With, allow two levels of
indirection, precompute if unconstrained array to simplify logic, and
use defer_limited_with to defer elaboration of some types from limited
with.
(finalize_from_with_types): New function.
2007-06-06 Gary Dismukes <dismukes@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
Tristan Gingold <gingold@adacore.com>
Olivier Hainque <hainque@adacore.com>
* trans.c (Identifier_to_gnu): Change test for deferred constant by
adding guard that the entity is an E_Constant before testing presence
of Full_view (and remove unnecessary test that entity is not a type).
For a CONST_DECL used by reference, manually retrieve
the DECL_INITIAL. Do not invoke fold in the other DECL_P cases either.
(struct language_function): Move from utils.c to here.
(struct parm_attr): New structure.
(parm_attr, parm_attr vector, parm_attr GC vector): New types.
(f_parm_attr_cache): New macro.
(Attribute_to_gnu) <Attr_Length>: When not optimizing, cache the
expressions for the 'First, 'Last and 'Length attributes of the
unconstrained array IN parameters.
(Subprogram_Body_to_gnu): Use gnu_subprog_decl throughout.
Allocate the information structure for the function earlier, as well
as the language-specific part.
If the parameter attributes cache has been populated, evaluate the
cached expressions on entry.
(takes_address): Add OPERAND_TYPE parameter. Handle N_Function_Call,
N_Procedure_Call_Statement and N_Indexed_Component.
(Pragma_to_gnu): Translate inspection_point to an asm statement
containaing a comment and a reference to the object (either its address
for BLKmode or its value).
(Identifier_to_gnu): Use TREE_CONSTANT instead of CONST_DECL to decide
to go to DECL_INITIAL. Together with the size constraint relaxation
in create_var_decl, enlarges the set of situations in which an
identifier may be used as an initializer without implying elaboration
code.
(Subprogram_Body_to_gnu): Do not fiddle with the debug interface but set
DECL_IGNORED_P on the function if Needs_Debug_Info is not set on the
node.
(maybe_stabilize_reference): Remove lvalues_only parameter.
(gnat_stabilize_reference): Adjust for above change.
(gnat_to_gnu): Do not set location information on the result
if it is a reference.
(add_cleanup): Add gnat_node parameter and set the location of the
cleanup to it.
(Handled_Sequence_Of_Statements_to_gnu): Adjust calls to add_cleanup.
(Exception_Handler_to_gnu_zcx): Likewise.
(gigi): Remove the cgraph node if the elaboration procedure is empty.
(Subprogram_Body_to_gnu): If a stub is attached to the subprogram, emit
the former right after the latter.
(start_stmt_group): Make global.
(end_stmt_group): Likewise.
(gnu_constraint_error_label_stack, gnu_storage_error_label_stack): New
vars.
(gnu_program_error_label_stack): Likewise.
(gigi): Initialize them.
(call_to_gnu, gnat_to_gnu, emit_check): Add new arg to build_call_raise.
(gnat_to_gnu, N_{Push,Pop}_{Constraint,Storage,Program}_Error_Label):
New cases.
(push_exception_label_stack): New function.
(takes_address): New function.
* utils.c (struct language_function): Move to trans.c from here.
(unchecked_convert): Do not wrap up integer constants in
VIEW_CONVERT_EXPRs.
(create_var_decl_1): Decouple TREE_CONSTANT from CONST_DECL. Prevent
the latter for aggregate types, unexpected by later passes, and relax an
arbitrary size constraint on the former.
(create_field_decl): Use tree_int_cst_equal instead of operand_equal_p
to compare the sizes.
(convert_vms_descriptor): When converting to a fat pointer type, be
prepared for a S descriptor at runtime in spite of a SB specification.
(shift_unc_components_for_thin_pointers): New function.
(write_record_type_debug_info): For variable-sized fields, cap the
alignment of the pointer to the computed alignment.
(finish_record_type): Change HAS_REP parameter into REP_LEVEL.
If REP_LEVEL is 2, do not compute the sizes.
(build_vms_descriptor): Adjust for new prototype of finish_record_type.
(build_unc_object_type): Likewise.
(declare_debug_type): New function.
* ada-tree.def: USE_STMT: removed (not emitted anymore).
* misc.c (gnat_expand_expr): Call to gnat_expand_stmt removed because
no statement is expandable anymore.
(gnat_init_gcc_eh): Do not initialize the DWARF-2 CFI machinery twice.
(gnat_handle_option): Only allow flag_eliminate_debug_types to be set
when the user requested it explicitely.
(gnat_post_options): By default, set flag_eliminate_unused_debug_types
to 0 for Ada.
(get_alias_set): Return alias set 0 for a type if
TYPE_UNIVERSAL_ALIASING_P is set on its main variant.
* ada-tree.h: (TYPE_UNIVERSAL_ALIASING_P): New macro.
(DECL_FUNCTION_STUB): New accessor macro.
(SET_DECL_FUNCTION_STUB): New setter macro.
* lang.opt (feliminate-unused-debug-types): Intercept this flag for Ada.
* fe.h (Get_Local_Raise_Call_Entity, Get_RT_Exception_Entity): New
declarations.
2007-06-06 Jose Ruiz <ruiz@adacore.com>
* s-intman-vxworks.ads, s-intman-vxworks.adb (Abort_Task_Signal):
Rename to Abort_Task_Interrupt to be able to keep the same interface
as the rest of the targets.
* s-osinte-vxworks.ads s-osinte-vxworks.adb
(To_VxWorks_Priority): Remove explicit "in" mode indicator
* s-osinte-vxworks6.ads, s-vxwork-arm.ads, system-vxworks-arm.ads:
New files.
2007-06-06 Robert Dewar <dewar@adacore.com>
* a-chahan.ads: Remove obsolescent pragmas
* a-chlat1.ads: Minor reformatting
2007-06-06 Robert Dewar <dewar@adacore.com>
* comperr.adb (Compiler_Abort): New Finalize/Output_Messages interface
for Errout
* errout.adb: New Finalize/Compilation_Errors/Output_Messages
implementation
* errout.ads (Finalize): Changed interface
(Output_Messages): New procedure
(Compilation_Errors): New Interface
* prepcomp.ads, prepcomp.adb (Parse_Preprocessing_Data_File): New
Finalize/Output_Messages interface for Errout
(Prepare_To_Preprocess): New Finalize/Output_Messages interface for
Errout.
2007-06-06 Thomas Quinot <quinot@adacore.com>
Olivier Hainque <hainque@adacore.com>
Robert Dewar <dewar@adacore.com>
* a-except.ads, a-except.adb: (Rmsg_28): Fix description for E.4(18)
check.
(Raise_Current_Excep): Call Debug_Raise_Exception just before
propagation starts, to let debuggers know about the event in a reliable
fashion.
(Local_Raise): Moved to System.Exceptions
More convenient to have this as a separate unit
* s-except.adb, s-except.ads: New files.
* a-exextr.adb (Unhandled_Exception): Delete - replaced by
Debug_Unhandled_Exception in System.Exceptions where it belongs
together with a couple of other debug helpers.
(Notify_Unhandled_Exception): Use Debug_Unhandled_Exception instead of
the former Unhandled_Exception.
* exp_ch11.ads, exp_ch11.adb: (Possible_Local_Raise): New procedure
(Warn_No_Exception_Propagation): New procedure
(Warn_If_No_Propagation): Rewritten for new warning generation
(Expand_Exception_Handlers): New warning generation
(Expand_N_Raise_xxx_Error): Rewritten for new warnings
(Add_Exception_Label): Use Special_Exception_Package_Used for test
instead of Most_Recent_Exception_Used (accomodates Exception_Traces)
(Expand_Local_Exception_Handlers): Unconditionally add extra block wrap
even if restriction is set (makes life easier in Check_Returns)
(Expand_Local_Exception_Handlers): Follow renamed entity chain when
checking exception identities.
(Expand_Local_Exception_Handlers): Do not optimize when all others case
(Expand_Local_Exception_Handlers): Set Exception_Junk flag on generated
block for handler (used by Check_Returns)
(Expand_Local_Exception_Handlers): Local_Raise now takes an address
(Expand_N_Handled_Sequence_Of_Statements): Properly handle -gnatd.x to
remove all exception handlers when optimizing local raise statements.
(Find_Local_Handler): Use Get_Renamed_Entity
(Expand_N_Handled_Sequence_Of_Statements): If the handled sequence is
marked analyzed after expanding exception handlers, do not generate
redundant cleanup actions, because they have been constructed already.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* a-finali.ads (Ada.Finalization): Add missing pragma Remote_Types. The
presence of this categorization pragma is mandated by the language.
(Limited_Controlled): Add missing pragma Preelaborable_Initialization
for this type.
2007-06-06 Vincent Celier <celier@adacore.com>
Robert Dewar <dewar@adacore.com>
* bcheck.adb, binde.adb, binderr.adb, binderr.ads, butil.adb,
butil.ads, erroutc.adb, erroutc.ads, errutil.adb, errutil.ads,
err_vars.ads, exp_tss.adb, exp_tss.ads, fmap.adb, fmap.ads,
fname.adb, fname.ads, fname-sf.adb, fname-uf.adb, fname-uf.ads,
lib-sort.adb, lib-util.adb, lib-util.ads, lib-xref.adb, makeutl.ads,
makeutl.adb, nmake.adt, osint.adb, osint.ads, osint-b.adb,
par-load.adb, prj-attr.adb, prj-dect.adb, prj-err.adb, prj-makr.adb,
prj-part.adb, prj-pp.adb, prj-proc.adb, prj-tree.adb, prj-tree.ads,
prj-util.adb, prj-util.ads, scans.adb, scans.ads, sem_ch2.adb,
sinput-c.adb, styleg-c.adb, tempdir.adb, tempdir.ads, uname.adb,
uname.ads, atree.h, atree.ads, atree.adb, ali-util.ads, ali-util.adb,
ali.ads, ali.adb:
Move Name_Id, File_Name_Type and Unit_Name_Type from package Types to
package Namet. Make File_Name_Type and Unit_Name_Type types derived from
Mame_Id. Add new type Path_Name_Type, also derived from Name_Id.
Use variables of types File_Name_Type and Unit_Name_Type in error
messages.
(Get_Name): Add parameter Ignore_Special, and set it reading file name
(New_Copy): When debugging the compiler, call New_Node_Debugging_Output
here.
Define flags Flag217-Flag230 with associated subprograms
(Flag_Word5): New record type.
(Flag_Word5_Ptr): New access type.
(To_Flag_Word5): New unchecked conversion.
(To_Flag_Word5_Ptr): Likewise.
(Flag216): New function.
(Set_Flag216): New procedure.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* a-stzunb.adb, a-stwiun.adb, a-strunb.adb: (Insert): Use 'Length
instead of 'Size.
* a-stwifi.ads, a-stzfix.ads: Minor reformatting
2007-06-06 Javier Miranda <miranda@adacore.com>
* a-tags.ads, a-tags.adb (Tag_Size): This constant is now internal to
the package.
(Object_Specific_Data_Array): This is now internal to the package.
(Object_Specific_Data): This is now internal to the package.
(Select_Specific_Data_Element): This is now internal to the package.
(Select_Specific_Data_Array): This is now internal to the package.
(Select_Specific_Data): This is now internal to the package.
(Offset_To_Top_Function_Ptr): This is now public.
(To_Offset_To_Top_Function_Ptr): Removed.
(Storage_Offset_Ptr,To_Storage_Offset_Ptr): These declarations are now
local to subprogram Offset_To_Top.
(Predefined_DT): Removed.
(Typeinfo_Ptr): Removed.
(OSD): This function is now internal to this package.
(SSD): This function is now internal to this package.
(DT): New function that displaces the pointer to the table of primitives
to get access to the enclosing wrapper record.
(IW_Membership): Code cleanup.
(Offset_To_Top): Code cleanup.
(Predefined_DT): Removed.
(Register_Interface_Tag): Removed.
(Set_Interface_Table): Removed.
(Set_Offset_Index): Removed.
(Set_Offset_To_Top): Code cleanup.
(Set_OSD): Removed.
(Set_Signature): Removed.
(Set_SSD): Removed.
(Set_Tagged_Kind): Removed.
(Typeinfo_Ptr): Removed.
(TSD): Removed.
(Displace): Add missing check on null actual.
* exp_disp.ads, exp_disp.adb
(Select_Expansion_Utilities): Removed.
(Build_Common_Dispatching_Select_Statements): Moved to exp_atags.
(Expand_Dispatching_Call): Update calls to Get_Prim_Op_Address because
the interface requires a new parameter.
(Make_Disp_Asynchronous_Select_Spec, Make_Disp_Conditional_Select_Spec,
Make_Disp_Get_Prim_Op_Kind_Spec, Make_Disp_Timed_Select_Spec): Replace
calls to subprograms Build_T, Build_S, etc. by the corresponding code.
Done to remove package Select_Expansion_Utilities.
(Make_DT): New implementation for statically allocated dispatch tables.
(Make_Secondary_DT): Moved to the scope of Make_DT.
(Register_Primitive): Code cleanup plus incoporate the use of the new
function DT_Address_Attribute.
(Expand_Interface_Thunk): The profile of this subprogram has been
changed to return the Thunk_Id and the corresponding code.
(Fill_DT_Entry): Removed. Its functionality is now provided by
subprogram Register_Primitive.
(Fill_Secondary_DT_Entry): Removed. Its functionality is now provided by
subprogram Register_Primitive.
(Register_Primitive): New subprogram that incorporates the previous
functionalities of Fill_DT_Entry and Fill_Secondary_DT_Entry.
(Build_Common_Dispatching_Select_Statements): Remove formal Typ. This
was only required to call Make_DT_Access_Action, which is now removed.
(Ada_Actions): Removed
(Action_Is_Proc): Removed
(Action_Nb_Arg): Removed
Replace all the calls to Make_DT_Access_Action by direct calls to
Make_Procedure_Call_Statement or Make_Function_Call.
(Set_DTC_Entity_Value): New subprogram.
(Set_All_DT_Position): Add call to new subprogram Set_DTC_Entity_Value.
(Expand_Interface_Thunk): Add missing support for primitives that are
functions with a controlling result (case in which there is no need
to generate the thunk).
* exp_atag.ads, exp_atag.adb
(Build_DT): New subprogram that displaces the pointer to reference the
base of the wrapper record.
(Build_Typeinfo_Offset): Removed.
(RTE_Tag_Node): Removed.
(Build_Common_Dispatching_Select_Statements): Moved here from exp_disp
(Build_Get_RC_Offset): Removed.
(Build_Inherit_Predefined_Prims): Removed.
(Build_Inherit_TSD: Removed.
(Build_New_TSD): Removed.
(Build_Set_External_Tag): Removed.
(Build_Set_Predefined_Prim_Op_Address): Add documentation.
(Build_Set_Prim_Op_Address): Add documentation.
(Build_Set_TSD): Removed.
* rtsfind.ads, rtsfind.adb
(Load_Fail): If load fails and we are not in configurable run-time
mode, then raise Unrecoverable_Error.
(Text_IO_Kludge): Generate an error message if a run-time library is
not available in a given run-time (ie. zfp run-time).
(RTE_Record_Component): Add code to check that the component we search
for is not found in two records in the given run-time package.
(RE_DT_Offset_To_Top_Size, RE_DT_Predef_Prims_Size): Removed
(RE_DT_Predef_Prims_Offset): New entity
(RE_Static_Offset_To_Top): New entity
(RE_HT_Link): New entity.
(System_Address_Image): Addition of this run-time package.
(RE_Address_Image): New entity.
(RE_Abstract_Interface): Removed.
(RE_Default_Prim_Op_Count): Removed.
(RE_DT_Entry_Size): Removed.
(RE_DT_Min_Prologue_Size): Removed.
(RE_DT_Prologue_Size): Removed.
(RE_Ifaces_Table_Ptr): Removed.
(RE_Interface_Data_Ptr): Removed.
(RE_Type_Specific_Data): Removed.
(RE_Primary_DT): Removed.
(RE_Register_Interface_Tag): Removed.
(RE_Set_Offset_Index): Removed.
(RE_Set_OSD): Removed.
(RE_Set_SSD): Removed.
(RE_Set_Signature): Removed.
(RE_Set_Tagged_Kind): Removed.
(RE_Address_Array): New entity.
(RE_DT): New entity.
(RE_Iface_Tag): New entity.
(RE_Interfaces_Table): New entity.
(RE_No_Dispatch_Table): New entity.
(RE_NDT_Prims_Ptr): New entity.
(RE_NDT_TSD): New entity.
(RE_Num_Prims): New entity.
(RE_Offset_To_Top_Function_Ptr): New entity.
(RE_OSD_Table): New entity.
(RE_OSD_Num_Prims): New entity.
(RE_Predef_Prims): New entity
(RE_Predef_Prims_Table_Ptr): New entity.
(RE_Primary_DT): New entity.
(RE_Signature): New entity.
(RE_SSD): New entity.
(RE_TSD): New entity.
(RE_Type_Specific_Data): New entity.
(RE_Tag_Kind): New entity.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* a-textio.ads, a-textio.adb (Write): Add explicit size clause for the
C imported variable.
(Skip_Line): Do not reset Before_LM_PM immediately when Before_LM is set
on entry.
2007-06-06 Robert Dewar <dewar@adacore.com>
* a-tienio.adb (Get): Adjust buffer size to accomodate one extra
character
2007-06-06 Vincent Celier <celier@adacore.com>
* a-tifiio.adb (Put, internal): For negative numbers, check that there
is room for at least one digit and the minus sign.
(Put.Put_Character): Never put a character outside of the range of
string To.
2007-06-06 Olivier Hainque <hainque@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* utils2.c (build_allocator): Provide the extra arguments to
make_aligning_type for super-aligned objects allocated from the default
pool. Leave enough room for a pointer before the aligning field, and
store the system's allocator return value there.
(build_call_alloc_dealloc): When releasing a super-aligned object,
retrieve the system's allocator return value from where build_allocator
has stored it, just ahead of the adjusted address we are passed.
(build_call_raise): Handle properly the generation of line numbers when
the node is marked No_Location.
(compare_elmt_bitpos): Use tree_int_cst_compare. Stabilize the sort
by using DECL_UID on ties.
(build_binary_op) <EQ_EXPR>: Accept fat pointer types with the same
main variant.
(build_call_raise): Handle converting exception into goto; support new
argument KIND.
(build_component_ref): Add new arg to build_call_raise.
2007-06-06 Hristian Kirtchev <kirtchev@adacore.com>
* a-ztflau.adb, a-wtflau.adb, a-tiflau.adb (Load_Real): Do not parse
"." in the case of nnn.xxx when nnn terminates with an underscore.
Parse the remaining "#" or ":" in the case of nnn#.xxx#
2007-06-06 Robert Dewar <dewar@adacore.com>
* a-tigeau.ads, a-tigeau.adb: (Store_Char): Change Buf to IN OUT
2007-06-06 Arnaud Charlet <charlet@adacore.com>
Vincent Celier <celier@adacore.com>
Robert Dewar <dewar@adacore.com>
* bindgen.adb (Gen_Output_File_Ada): Generate pragma No_Run_Time when
needed.
(Gen_Output_File_Ada, Gen_Output_File_C): Never use __attribute
((destructor)) for adafinal, even when switch -a is used.
Do not issue pragma Linker_Destructor for adafinal when switch -a is
used.
(Gen_Object_Files_Options): Add formatting of Linker Options, when
Output_Linker_Option_List is set. Suppress this formatting when
Zero_Formatting is set.
Add case for CLI_Target.
(System_Restrictions_Used): New flag, used to avoid generating with of
System_Restrictions and initialization of the data unless there is
some use of System.Restrictions in the partition.
(Check_System_Restrictions_Used): New procedure
* s-stalib.adb: Remove with of System.Restrictions. No longer needed
since we only with this unit in the binder file if it is used elsewhere
in the partition.
2007-06-06 Vincent Celier <celier@adacore.com>
* bindusg.adb: Add line for @<response file>
Add lines for new switches -R and -Z
* gnatbind.adb (Gnatbind): Do not include sources from the GNAT
hierarchy in the list of files of the closure when -R is used
(Gnatbind): Accept arguments starting with '@' to indicate response
files and take the arguments from the response files.
If List_Closure is set, display the referenced files
2007-06-06 Javier Miranda <miranda@adacore.com>
Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* checks.ads, checks.adb (Apply_Address_Clause_Check): Handle case in
which the address-clause is applied to in-mode actuals (allowed by
13.1(22)).
(Apply_Discriminant_Check): Do not generate a check if the type is
constrained by a current instance.
(Activate_Division_Check): New procedure
(Activate_Overflow_Check): New procedure
(Activate_Range_Check): New procedure
Call these new Activate procedures instead of setting flags directly
(Apply_Array_Size_Check): Removed, no longer needed.
Code clean up: remove obsolete code related to GCC 2.
(Get_E_Length): Protect against bomb in case scope is standard
(Selected_Range_Checks): If the node to be checked is a conversion to
an unconstrained array type, and the expression is a slice, use the
bounds of the slice to construct the required constraint checks.
Improve NOT NULL error messages
(Apply_Constraint_Check): If the context is a null-excluding access
type, diagnose properly the literal null.
2007-06-06 Pascal Obry <obry@adacore.com>
* clean.adb (Clean_Archive): Use untouched casing for the archive name
and the corresponding .deps file.
(Clean_Interface_Copy_Directory): Use untouched casing for the library
src directory. Minor code-clean-up. Use untouched casing for files
read into the library src dir.
(Clean_Library_Directory): Idem.
(Parse_Cmd_Line): Accept new switch -aP
2007-06-06 Javier Miranda <miranda@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* einfo.ads, einfo.adb (Available_View): New synthesized attribute
applicable to types that have the With_Type flag set. Returns the
non-limited view of the type, if available, otherwise the type itself.
For class-wide types, there is no direct link in the tree, so we have
to retrieve the class-wide type of the non-limited view of the Etype.
New attributes Static_Initialization and Static_Elaboration_Desired.
Remove the pragma Thread_Body, and the associated flag
Is_Thread_Body in entities, and all related code.
(Suppress_Value_Tracking_On_Call): New flag
E_Exception has Esize and Alignment fields
(Universal_Aliasing): New function.
(Set_Universal_Aliasing): New procedure.
(Write_Entity_Flags): Deal with Universal_Aliasing flag.
(Check_Nested_Access): New procedure.
(Has_Up_Level_Access, Set_Has_Up_Level_Access): New procedures.
(Find_Direct_Name, Note_Possible_Modification): Use Check_Nested_Access.
(Related_Interface): New attribute. Present in dispatch table pointer
components of records. Set to point to the entity of the corresponding
interface type.
(Is_By_Reference_Type): Recurse on the full view of an incomplete type.
(Original_Access_Type): Remove, not needed.
(Root_Type): Handle properly subtypes of class-wide-types.
Update comments.
* sem_ch4.adb (Analyze_Explicit_Dereference): Add support for
class-wide types visible through limited-with clauses.
(Try_Primitive_Operation): When examining all primitive operations of a
tagged type, do not consider subprograms labeled as hidden unless they
belong to a private generic type with a tagged parent.
(Try_Object_Operation): Extensive rewriting, to handle properly various
overloading cases, when several ancestors may have class-wide operations
that are possible candidates, and when the overloaded functions return
array types and have defaulted parameters so that the call may be
interpreted as an indexing.
(Analyze_Allocator): Remove Mark_Allocator and its invocation.
(Process_Function_Call): use Next, rather than Next_Actual, to analyze
successive actuals before analyzing the call itself.
(Try_Primitive_Operation): A primitive operation is compatible with the
prefix if the prefix has a synchronized type and the type of the formal
is its corresponding record, as can be the case when the primitive
operation is declared outside of the body of the type.
(Traverse_Homonyms): New subprocedure of Try_Class_Wide_Operation, to
perform homonym traversal, looking for class-wide operation matches
(formerly done in statements of Try_Class_Wide_Operation). Matches on
access parameters are now restricted to anonymous access types.
(Mark_Allocator): An allocator with a discriminant association parent is
a coextension.
(Try_One_Prefix_Interpretation): If the type of the object is
incomplete, as can be happen when it is a limited view obtained through
a limited_with_clause, the selected component is not part of a prefixed
call.
(Complete_Object_Operation): Diagnose properly an object that is not
aliased when the corresponding controlling formal is an access
parameter.
(Try_Primitive_Operation, Try_Class_Wide_Operation): Diagnose properly
ambiguous calls in prefixed notation, where two primitives differ only
in that the controlling argument of one is an access parameter.
* sem_ch6.adb (Has_Single_Return): Add guard in code that determines
whether a function that returns an unconstrained type can be inlined.
(Process_Formals): Diagnose properly the illegal use of an incomplete
type in the profile of an access_to_subprogram declaration.
(Check_Synchronized_Overriding): Nothing check for concurrent types, the
operations are attached to the corresponding record.
(Analyze_Subprogram_Specification): Add variables Formal and Formal_Typ.
When processing a primitive of a concurrent type which implements an
interface change the type of all controlling formals to that of the
corresponding record type.
(Check_Synchronized_Overriding): Relax the conditional logic when trying
to determine the tagged type to which a primitive belongs.
(Check_Conventions): Capture condition to ignore a primitive operation
(which is shared between the loop in Check_Conventions and the one in
Check_Convention) in a new local function Skip_Check.
(Check_Convention): Rename Prim_Op to Second_Prim_Op to avoid possible
confusion with Check_Conventions' own Prim_Op local variable.
(Create_Extra_Formals): Test for a tagged result type rather than a
controlling result when determining whether to add a BIP_Alloc_Form
formal and a BIP_Final_List formal to the function.
(Check_Conformance); For parameters that are anonymous access types,
subtype conformance requires that the not null and the constant
indicators must match
(Check_Synchronized_Overriding): New parameter Formal_Typ. Add machinery
to retrieve the appropriate type when processing a concurrent type
declared within a generic. Minor comment reformatting. Change invocation
of Overrides_Synchronized_Primitive to Find_Overridden_Synchronized_Pri-
mitive.
(Analyze_Subprogram_Body): If the return type of a function is an
anonymous access to the limited view of a class-wide type, and the
non-limited view of the type is available, update the type of the
function so that code can be generated.
(Process_Formals): In case of access-subtype itype whose designated
type is also an itype (situation that happens now with access to
subprograms) we mark the access-type itype with the Has_Delayed_Freeze
attribute to avoid backend problems.
(Check_Return_Subtype_Indication): Replace R_Type with R_Stm_Type in
init of R_Stm_Type_Is_Anon_Access. Also check that base types of the
anonymous types' designated types are same before testing
Subtypes_Statically_Match.
(Create_Extra_Formals): Test for a named access parameter that is a
controlling formal as an additional condition for adding an
accessibility level formal. This can occur in the subp type created for
dispatching calls in Expand_Dispatching_Call, and allows calling
Create_Extra_Formals from that procedure rather than special-casing the
extra formals there.
(Create_Extra_Formals): Add BIP_Alloc_Form and BIP_Final_List formals
when the function has a controlling result.
(Check_Returns): Add much more knowledge of the optimization of local
raise statements to gotos, to retain proper warnings in this case.
(Check_Statement_Sequence): Ignore N_Push_xxx_Label and N_Pop_xxx_Label
nodes when looking for last statement.
* sem_type.ads, sem_type.adb (Specific_Type): Add support for
class-wide types visible through limited with clauses.
(Add_One_Interp): If the operands are anonymous access types, the
predefined operator on universal_access is immediately visibles
(Find_Unique_Type): Handle anonymous access to subprogram types just as
other anonymous access types.
(Disambiguate): Take into account CIL convention.
(Interface_Present_In_Ancestor): Add support for class-wide interfaces.
2007-06-06 Robert Dewar <dewar@adacore.com>
* sinput.ads, sinput.adb, uintp.ads, urealp.adb, stringt.adb,
sem_elim.adb, prj-strt.adb, repinfo.ads, repinfo.adb, namet.ads,
elists.ads, elists.adb, lib.ads, lib.adb (Unlock): New procedure.
Fix lower bound of tables.
Add rep clauses.
* nlists.adb: Ditto.
(Prev_Node, Next_Node): Change index type to Int so that it properly
covers the range First_Node_Id - 1 up.
2007-06-06 Javier Miranda <miranda@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Bob Duff <duff@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
* exp_aggr.ads, exp_aggr.adb:
(Build_Record_Aggr_Code): Add missing initialization of secondary tags
in extension aggregates.
(Flatten): Other conditions being met, an aggregate is static if the
low bound given by component associations is different from the low
bound of the base index type.
(Packed_Array_Aggregate_Handled): If the component type is itself a
packed array or record, the front-end must expand into assignments.
(Gen_Ctrl_Actions_For_Aggr): In call to Init_Controller, pass False to
Init_Pr, instead of Ancestor_Is_Expression.
(Gen_Ctrl_Actions_For_Aggr): When processing an aggregate of a
coextension chain root, either generate a list controller or use the
already existing one.
(Static_Array_Aggregate): New procedure to construct a positional
aggregate that can be handled by the backend, when all bounds and
components are compile-time known constants.
(Expand_Record_Aggregate): Force conversion of aggregates of tagged
types covering interface types into assignments.
(Replace_Type): move to Build_Record_Aggr_Code.
(Expand_Record_Aggr_Code): if the target of the aggregate is an
interface type, convert to the definite type of the aggregate itself,
so that needed components are visible.
(Convert_Aggr_In_Object_Decl): If the aggregate has controlled
components and the context is an extended return statement do not
create a transient block for it, to prevent premature finalization
before the return is executed.
(Gen_Assign): Do not generate a call to deep adjust routine if the
component type is itself an array of controlled (sub)-components
initialized with an inner aggregate.
(Component_Check): New name for Static_Check. This name is now more
appropriate, and documentation is added which was missing.
(Component_Check): Add test for bit aligned component value
(Component_Not_OK_For_Backend): Renames Has_Delayed_Nested_Aggregate_Or_
Tagged_Comps, name is more appropriate given added function below.
(Component_Not_OK_For_Backend): Check for bit aligned component ref.
2007-06-06 Hristian Kirtchev <kirtchev@adacore.com>
Javier Miranda <miranda@adacore.com>
Robert Dewar <dewar@adacore.com>
* exp_attr.adb (Expand_N_Attribute_Reference): Case Callable and
Terminated: Add unchecked type conversion from System.Address to
System.Tasking.Task_Id when calling the predefined primitive
_disp_get_task_id.
Disable new Ada 05 accessibility check for JVM.NET targets, which
cannot be implemented in a practical way.
(Expand_N_Attribute_Reference: case Attribute_Tag): The use of 'Tag in
the sources always references the tag of the actual object. Therefore,
if 'Tag is applied in the sources to class-wide interface objects we
generate code that displaces "this" to reference the base of the object.
(Expand_N_Attribute_Reference, case Size): Return specified size if
known to front end.
(Expand_N_Attribute_Reference): The expansion of the 'Address attribute
has code that displaces the pointer of the object to manage interface
types. However this code must not be executed when the prefix is a
subprogram. This bug caused the wrong expansion of the internally
generated assignment that fills the dispatch table when the primitive
is a function returning a class-wide interface type.
(Expand_N_Attribute_Reference:Attribute_Valid): Remove incorrect call to
Set_Attribute_Name for Name_Unaligned_Valid.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* exp_ch13.adb (Expand_N_Attribute_Definition_Clause, case 'Address):
If the initialization is the equivalent aggregate of the initialization
procedure of the type, do not remove it.
(Expand_N_Attribute_Definition_Clause): Exclude access variables
initialized to null from having their expression reset to empty and
note this exception in the comment.
2007-06-06 Hristian Kirtchev <kirtchev@adacore.com>
Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* exp_ch2.adb: Remove "with" and "use" clauses for Namet and Snames.
Add "with" and "use" clauses for Sem_Attr.
(Expand_Current_Value): Do not replace occurences of attribute
references where the prefix must be a simple name.
* sem_attr.ads, sem_attr.adb: Remove "with" and "use" clauses for
Namet. Add new arrays Attribute_Name_Modifies_Prefix and
Attribute_Requires_Simple_Name_Prefix.
(Name_Modifies_Prefix): Body of new function.
(Requires_Simple_Name_Prefix): Body of new function.
(Resolve_Attribute, case Access): Improve error message for case of
mismatched conventions.
(Analyze_Attribute, case 'Tag): The prefix the attribute cannot be of an
incomplete type.
(Analyze_Attribute, case 'Access): If the type of the prefix is a
constrained subtype for a nominal unconstrained type, use its base type
to check for conformance with the context.
(Resolve_Attribute): Remove test of the access type being associated
with a return statement from condition for performing accessibility
checks on access attributes, since this case is now captured by
Is_Local_Anonymous_Access.
(Analyze_Access_Attribute): Set Address_Taken on entity
(Analyze_Attribute, case Address): Set Address_Taken on entity
(OK_Self_Reference): Traverse tree to locate enclosing aggregate when
validating an access attribute whose prefix is a current instance.
(Resolve_Attribute): In case of attributes 'Code_Address and 'Address
applied to dispatching operations, if freezing is required then we set
the attribute Has_Delayed_Freeze in the prefix's entity.
(Check_Local_Access): Set flag Suppress_Value_Tracking_On_Call in
current scope if access of local subprogram taken
(Analyze_Access_Attribute): Check legality of self-reference even if the
expression comes from source, as when a single component association in
an aggregate has a box association.
(Resolve_Attribute, case 'Access): Do not apply accessibility checks to
the prefix if it is a protected operation and the attribute is
Unrestricted_Access.
(Resolve_Attribute, case 'Access): Set the Etype of the attribute
reference to the base type of the context, to force a constraint check
when the context is an access subtype with an explicit constraint.
(Analyze_Attribute, case 'Class): If the prefix is an interface and the
node is rewritten as an interface conversion. leave unanalyzed after
resolution, to ensure that type checking against the context will take
place.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
Robert Dewar <dewar@adacore.com>
* exp_ch3.adb (Make_Controlling_Function_Wrappers): generate wrapper a
wrapper when the full view of the controlling type of an inherited
function that dispatches on result implements interfaces.
(Expand_N_Object_Declaration): In cases where the type of the
declaration is anonymous access, create finalization list for it.
(Expand_N_Object_Declaration): Generate a persistent_bss directive only
if the object has no explicit initialization, to match description of
functionality of pragam Persistent_BSS.
(Build_Equivalent_Array_Aggregate, Build_Equivalent_Record_Aggregate):
new function to build static aggregates, to replace initialization call
when static initialization is desired.
(Freeze_Type): Generate a list controller for an access type whenever
its designated type has controlled anonymous access discriminants.
(Build_Equivalent_Aggregate): New procedure to compute a static
aggregate to be used as default initialization for composite types,
instead of a generating a call to the initialization procedure for the
type.
(Build_Initialization_Call): When available, replace a call to the
initialization procedure with a copy of the equivalent static aggregate
for the type.
(Expand_N_Object_Declaration): Use New_Occurrence_Of in generated
declarations for objects of a class-wide interface type, rather than
just identifiers, to prevent visibility problems.
(Expand_N_Object_Declaration): When expanding the declaration for an
object of a class-wide interface type, preserve the homonym chain of
the original entity before exchanging it with that of the generated
renaming declaration.
(Freeze_Enumeration_Type): Don't raise CE if No_Exception_Propagation
active, because there is no way to handle the exception.
(Freeze_Record_Type): In case of CPP_Class types add a call to Make_DT
to do a minimum decoration of the Access_Disp_Table list.
(Expand_Record_Controller): Avoid the addition of the controller between
the component containing the tag of a secondary dispatch table and its
adjacent component that stores the offset to the base of the object.
This latter component is only generated when the parent type has
discriminants ---documented in Add_Interface_Tag_Components).
(Apply_Array_Size_Check): Removed, no longer needed.
(Expand_N_Full_Type_Declaration): If the type has anonymous access
components, create a Master_Entity for it only if it contains tasks.
(Build_Init_Procedure): Suppress the tag assignment compiling under
no run-time mode.
(Freeze_Record_Type): Remove code associated with creation of dispatch
table.
(Init_Secondary_Tags): Update type of actuals when generating calls to
Ada.Tags.Set_Offset_To_Top
(Stream_Operation_OK): Disable use of streams compiling under no
run-time mode
(Expand_N_Object_Declaration): Don't do Initialize_Scalars initalization
if Has_Init_Expression set.
(Build_Init_Procedure): Replace call to Fill_DT_Entry by call to
Register_Primitive, which provides the same functionality.
(Requires_Init_Proc): Return false in case of interface types.
(Add_Secondary_Tables): Use the new attribute Related_Interface to
cleanup the code.
(Predefined_Primitive_Freeze): Do not assume that an internal entity
is always associated with a predefined primitive because the internal
entities associated with interface types are not predefined primitives.
Therefore, the call to Is_Internal is replaced by a call to the
function Is_Predefined_Dispatching_Operation.
(Make_Eq_If): When generating the list of comparisons for the
components of a given variant, omit the controller component that is
present if the variant has controlled components.
2007-06-06 Javier Miranda <miranda@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
Bob Duff <duff@adacore.com>
* exp_ch4.adb (Complete_Coextension_Finalization): Add machinery to
handle the creation of finalization lists and calls for nested
coextensions when the root of the chains is part of a return statement.
(Inside_A_Return_Statement): New function inside Complete_Coextension_
Finalization.
(Expand_Record_Equality): Skip components that are interface types.
(Displace_Allocator_Pointer): Add missing support for interface subtypes
(Expand_N_Allocator): Replace invocation of Is_Local_Access_Discriminant
with Rewrite_Coextension. Change the condition for detecting coextension
root nodes.
(Is_Local_Access_Discriminant): Removed.
(Rewrite_Coextension): New routine which rewrites a static coextension
as a temporary and uses its unrestricted access in the construction of
the outer object.
(Complete_Coextension_Finalization): New routine. Generate finalization
attachment calls to all delayed coextensions.
(Expand_N_Allocator): Call Complete_Coextension_Finalization whenever
the allocator is not a coextension itself and has delayed coextensions.
If the current allocator is controlled, but also a coextension, delay
the generation of the finalization attachment call.
Rename local variable "Node" to "Nod" in order to avoid confusion with
"Elists.Node".
(Expand_Allocator_Expression): Call Adjust for initialized allocators of
limited types that are not inherently limited. Such an allocator is
illegal, but is generated by the expander for a return statement, to
copy the result onto the secondary stack. This is the only case where a
limited object can be copied. Generate code to displace the pointer
to the object if the qualified expression is a class-wide interface
object. Such displacement was missing and hence the copy of the object
was wrong.
(Apply_Accessibility_Check): Handle allocated objects initialized in
place.
(Displace_Allocator_Pointer): Subsidiary procedure to Expand_N_Allocator
and Expand_Allocator_Expression. Allocating class-wide interface objects
this routine displaces the pointer to the allocated object to reference
the component referencing the corresponding secondary dispatch table.
Expand_Allocator_Expression): Add missing support to allocate class-wide
interface objects initialized with a qualified expression.
(Get_Allocator_Final_List): Test for an anonymous access type that is a
function result type, and use the finalization list associated with the
function scope in that case (such an anonymous type should not be
treated like an access parameter's type).
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
Javier Miranda <miranda@adacore.com>
* exp_ch5.adb (Expand_N_Assignment_Statement): For the assignment of a
controlled type, use Make_Handler_For_Ctrl_Operation to construct the
required exception handler.
(Expand_Simple_Function_Return, Expand_N_Return_Statement): Handle
properly the case of a function whose return type is a limited
class-wide interface type. Modify the code of the accessibility
check to handle class-wide interface objects. In this case we need to
displace "this" to reference the primary dispatch table to get access
to the TSD of the object (to evaluate its accessibility level).
(Expand_N_Extended_Return_Statement): Test for a tagged result type
rather than a controlling result as one of the conditions for
generating tests of the implicit BIP_Alloc_Form formal. The
initialization assignment is also handled according to whether the
result is tagged instead of controlling.
In the case where the init assignment is inserted in the "then" part of
the allocation conditional, rewrite the target to be a dereference of
the implicit BIP_Object_Access formal.
If the returned value is unconstrained and created on the secondary
stack, mark the enclosing block and function so that the secondary
stack is not reclaimed on return.
Treat returns from functions with controlling results similarly to
returns from functions with unconstrained result subtypes.
If the object returned is unconstrained, and an allocator must be
created for it, analyze the allocator once the block for the extended
return is installed, to ensure that finalizable components
of the expression use the proper finalization list. Guard the call to
Move_Final_List with a check that there is something to finalize.
(Make_Tag_Ctrl_Assignment): Use "old" handling
of controlled type assignment for virtual machines, since new code uses
unsupported features (such as direct access to bytes in memory).
2007-06-06 Gary Dismukes <dismukes@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_ch6.ads, exp_ch6.adb (Expand_Call): When adding an extra
accessibility actual, check for the case of an aliased object that has
been rewritten as an Access attribute, and assign Prev to Prev_Orig so
we fall into processing for the attribute rather than the name of the
object.
(Expand_Inline_Call): If an actual is a literal, and the corresponding
formal has its address taken in the body, create a temporary to capture
value. If the return type is a limited interface, do not treat the
return value as Controlled.
(Is_In_Place_Function): If the return type is a limited interface,
treat as returning in place. The actual returned object may not always
be limited, but the caller has to assume that it is returned in place.
(Add_Final_List_Actual_To_Build_In_Place_Call): If the call is the
context of an allocator, use the correct finalization chain (that is,
the chain belonging to the access type, rather than the chain belonging
to the current scope).
(Add_Alloc_Form_Actual_To_Build_In_Place_Call): Test for a tagged
result type rather than a controlling result as a precondition for
adding an allocation form actual to a build-in-place call.
(Add_Final_List_Actual_To_Build_In_Place_Call): Ditto.
(Freeze_Subprogram): Code cleanup. Remove all the code that register the
primitive in the dispatch tables. This work is now done by Make_DT when
the type is frozen.
(Register_Predefined_DT_Entry): Removed.
(Add_Return): If end label is not present, use sloc of last statement
for generated return statement in procedure, for better gdb behavior
on expanded code.
(Add_Access_Actual_To_Build_In_Place_Call): Set parent fields of the
object address nodes to ensure proper processing by routines like
Insert_After*.
(Expand_Call): Fix generation of validity check for parameter
(Add_Alloc_Form_Actual_To_Build_In_Place_Call): Return without passing
the allocation form parameter if the result subtype is constrained,
except when the function has a controlling result.
(Add_Final_List_Actual_To_Build_In_Place_Call): Test Controlled_Type
rather than Is_Controlled and Has_Controlled_Component, since we want to
include class-wide result types in this treatment. Also test for a
controlling result, since that also requires passing a finalization
list.
(Make_Build_In_Place_Call_In_Allocator): Call Add_Alloc_Form_Actual_*
even when the result subtype is constrained, to handle calls involving
controlling results.
(Make_Build_In_Place_Call_In_Anonymous_Context): Add_Alloc_Form_Actual_*
is now called even when the result subtype is constrained, to handle
calls involving controlling results.
(Make_Build_In_Place_Call_In_Assignment): Remove test for Is_Constrained
on call to Add_Alloc_Form_Actual_To_Build_In_Place_Call (that procedure
now performs the test).
(Make_Build_In_Place_Call_In_Object_Declaration):
Add_Alloc_Form_Actual_* is now called even when the result subtype is
constrained, to handle calls involving controlling results.
(Add_Return): Accomodate rewritten pattern from local raise to goto
transformation, so that we still recognize an transfer statement
and do the right thing here in that case.
(Expand_N_Subprogram_Body): Add dummy Push/Pop_xxx_Label nodes at start
and end of subprogram code.
(Register_Interface_DT_Entry, Register_Predefined_DT_Entry): Add missing
support for primitives that are functions (without formals) with a
controlling result.
(Inherited_From_Formal): If the actual subtype has not generic parent
type, it is not an actual for a formal derived type, and there is no
operation to inherit from the formal.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Thomas Quinot <quinot@adacore.com>
* exp_ch7.ads, exp_ch7.adb (Expand_Cleanup_Actions): Set Sloc of
inserted cleanup code appropriately for GDB use.
(Make_Deep_Proc): Use Make_Handler_For_Ctrl_Operation to create
exception handler for Deep_Adjust or Deep_Finalize.
(Make_Handler_For_Ctrl_Operation): New subprogram. When runtime entity
Raise_From_Controlled_Operation is available, use a call to that
subprogram instead of a plain "raise Program_Error" node to raise
Program_Error if an exception is propagated from an Adjust or Finalize
operation.
(Insert_Actions_In_Scope_Around): If the statement to be wrapped
appears in the optional statement list of a triggering alternative, the
scope actions can be inserted directly there, and not in the list that
includes the asynchronous select itself.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
* exp_ch9.ads, exp_ch9.adb (Build_Protected_Entry): Set sloc of
generated exception handler appropriately when debugging generated code.
Deal properly with No_Exception_Propagation restriction mode.
(Expand_N_Abort_Statement): Add an unchecked type conversion from
System.Address to System.Tasking.Task_Id when processing the result of
the predefined primitive _disp_get_task_id.
(Expand_N_Asynchronous_Select): Clarify comment.
(Expand_N_Protected_Type_Declaration): Minor code cleanup.
(Find_Parameter_Type): New routine inside Type_Conformant_Parameters.
(Type_Conformant_Parameters): New parameter Prim_Op_Typ. Code cleanup.
(Add_Private_Declarations, Build_Protected_Body): Use proper slocs for
privals and for generated call to Complete_Entry_Body, for better gdb
behavior.
(Copy_Result_Type): Utility to construct a parameter and result profile
for protected functions whose return type is an anonymous access to
subprogram.
(Build_Protected_Sub_Spec and Expand_Access_Protected_Subprogram_Type):
call the above.
(Build_Task_Activation_Call): Insert Activate_Tasks call at proper
point when the local-raise-to-goto transformation has taken place.
2007-06-06 Javier Miranda <miranda@adacore.com>
Nicolas Setton <setton@adacore.com>
* exp_dbug.adb (Get_Encoded_Name): Modified to continue providing its
functionality when the backend is generating code.
Otherwise any serious error
reported by the backend calling the frontend routine Error_Msg
changes the Compilation_Mode to Check_Semantics, disables the
functionality of this routine and causes the generation of
spureous additional errors.
* exp_dbug.ads (Pointers to Unconstrained Arrays): Document the
debugging information now generated by the compiler for fat-pointer
types.
Document the contents of DW_AT_producer in the GNAT Vendor extensions to
DWARF2/3.
Document GNAT Vendor extensions to DWARF 2/3 and the "-gdwarf+" switch.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* exp_dist.ads, exp_dist.adb (Make_Transportable_Check): New subprogram
(GARLIC_Support.Build_Subprogram_Receiving_Stubs,
PolyORB_Support.Build_Subprogram_Receiving_Stubs):
For a remote call to a function with a classwide return type, apply an
E.4(18) check to the returned value.
(Add_RACW_Primitive_Declarations_And_Bodies): Do not generate stubs for
stream attributes of the designated type of an RACW, as they are not
dispatching primitive operations.
2007-06-06 Geert Bosch <bosch@adacore.com>
* exp_fixd.adb (Integer_Literal): Add optional argument to construct a
negative literal
(Do_Divide_Fixed_Fixed): Add comments to indicate Frac is always
positive
(Do_Divide_Fixed_Universal): Handle case of negative Frac.
(Do_Multiply_Fixed_Fixed): Add coments to indicate Frac is always
positive
(Do_Multiply_Fixed_Universal): Handle case of negative Frac.
2007-06-06 Javier Miranda <miranda@adacore.com>
* exp_imgv.adb (Expand_Value_Attribute): Disable compilation of this
attribute compiling package Ada.Tags under No_Run_Time_Mode.
2007-06-06 Javier Miranda <miranda@adacore.com>
* exp_intr.adb (Expand_Unc_Deallocation): Add missing support for
deallocation of class-wide interface objects.
(Expand_Dispatching_Constructor_Call): Take into account that if the
result of the dispatching constructor is an interface type, the
function returns a class-wide interface type; otherwise the returned
object would be actual. The frontend previously accepted returning
interface types because Expand_Interface_Actuals silently performed
the management of the returned type "as if" it were a class-wide
interface type.
(Expand_Dispatching_Constructor_Call): Replace call to
Make_DT_Access_Action by direct call to Make_Function_Call.
2007-06-06 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_pakd.adb (Expand_Packed_Not): Use RM_Size rather than ESize to
compute masking constant, since we now set Esize properly to the
underlying size.
(Create_Packed_Array_Type): Set proper Esize value adjusted as required
to match the alignment.
(Create_Packed_Array_Type): Use Short_Short_Unsigned as base type for
packed arrays of 8 bits or less.
* freeze.adb (Freeze_Entity): When freezing the formals of a
subprogram, freeze the designated type of a parameter of an access type
only if it is an access parameter.
Increase size of C convention enumeration object
(Freeze_Entity, array type case): Make sure Esize value is properly
adjusted for the alignment if it is known.
(Freeze_Entity, array type case): When checking bit packed arrays for
the size being incorrect, check RM_Size, not Esize.
(Freeze_Record_Type): Check for bad discriminated record convention
(In_Exp_Body): Return true if the body is generated for a subprogram
renaming, either an attribute renaming or a renaming as body.
(Check_Itype): If the designated type of an anonymous access component
is a non-protected subprogram type, indicate that it is frozen, to
prevent out-of-scope freeze node at some subsequent call.
(Freeze_Subprogram): On OpenVMS, reject descriptor passing mechanism
only if the subprogram is neither imported nor exported, as well as the
NCA descriptor class if the subprogram is exported.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Arnaud Charlet <charlet@adacore.com>
Robert Dewar <dewar@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* exp_prag.adb (Expand_Pragma_Import_Or_Interface): Remove properly a
default initialization on an imported object, when there is no
initialization call generated for it.
(Expand_Pragma_Assert): Add handling of No_Exception_Propagation
restriction
* snames.h, snames.ads, snames.adb, par-prag.adb: New pragma
Static_Elaboration_Desired.
Remove pragma Thread_Body.
Implement a new pragma No_Body
Removes the Explicit_Overriding pragma
Remove Optional_Overriding pragma
(Prag): Deal with Universal_Aliasing.
(Name_CIL, Name_CIL_Constructor, Convention_CIL,
Pragma_CIL_Constructor): New names.
* sem_cat.adb (Validate_Object_Declaration): An initialization that
uses the equivalent aggregate of a type must be treated as an implicit
initialization.
(Get_Categorization): Check a unit for pragma Preelaborate only if it
has none of the other categories.
(Process_Import_Or_Interface_Pragma): Report an error for an attempt
to apply Import to an object renaming declaration.
* sem_prag.adb (Process_Import_Or_Interface): Warn that a type imported
from a C++ class should be declared as limited and that it will be
considererd limited.
(Analyze_Pragma): Warn that a type specified with pragma CPP_Class
should be declared as limited and that it will be considererd limited.
(Ada_2005_Pragma): New procedure, used to deal with Ada 2005 pragmas
(Analyze_Pragma, case Export): Diagnose export of enumeration literal
(Analyze_Pragma): Deal with Universal_Aliasing.
(Sig_Flags): Likewise.
(Set_Encoded_Interface_Name): Suppress encoding when compiling for AAMP.
(Overflow_Checks_Unsuppressed): New flag.
(Process_Suppress_Unsuppress): Set Overflow_Checks_Unsuppressed.
(Analyze_Pragma [case Pack]): Ignore pragma Pack and post warning in
case of JVM or .NET targets, and compiling user code.
Add debugging convenience routine rv
2007-06-06 Robert Dewar <dewar@adacore.com>
* exp_strm.adb (Make_Field_Attributes): Avoid _Parent components that
are interface type.
(Build_Elementary_Input_Call): For floating-point use right type in the
absence of strange size or stream size clauses.
(Build_Elementary_Write_Call): Same fix
(Has_Stream_Standard_Rep): Returns False if Stream_Size attribute
set to value that does not match base type size.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
* exp_util.ads, exp_util.adb (Expand_Subtype_From_Expr): In Ada2005, an
object of a limited type can be initialized with a call to a function
that returns in place. If the limited type has unknown discriminants,
and the underlying type is a constrained composite type, build an actual
subtype from the function call, as is done for private types.
(Side_Effect_Free): An expression that is the renaming of an object or
whose prefix is the renaming of a object, is not side-effect free
because it may be assigned through the renaming and its value must be
captured in a temporary.
(Has_Controlled_Coextensions): New routine.
(Expand_Subtype_From_Expr): Do nothing if type is a limited interface,
as is done for other limited types.
(Non_Limited_Designated_Type): new predicate.
(Make_CW_Equivalent_Type): Modified to handle class-wide interface
objects.
Remove all handling of with_type clauses.
* par-ch10.adb: Remove all handling of with_type clauses.
* lib-load.ads, lib-load.adb (Load_Main_Source): Do not get the
checksum if the main source could not be parsed.
(Loat_Unit): When processing a child unit, determine properly whether
the parent unit is a renaming when the parent is itself a child unit.
Remove handling of with_type clauses.
* sinfo.ads, sinfo.adb (Is_Static_Coextension): New function.
(Set_Is_Static_Coextension): New procedure.
(Has_Local_Raise): New function
(Set_Has_Local_Raise): New procedure
(Renaming_Exception): New field
(Has_Init_Expression): New flag
(Delay_Finalize_Attach): Remove because flag is obsolete.
(Set_Delay_Finalize_Attach): Remove because flag is obsolete.
Remove all handling of with_type clauses.
(Exception_Junk): Can now be set in N_Block_Statement
2007-06-06 Vincent Celier <celier@adacore.com>
Robert Dewar <dewar@adacore.com>
* frontend.adb (Frontend): Return immediately if the main source could
not be parsed, because of preprocessing errors.
* gnat1drv.adb (gnat1drv): Handle RE_Not_Available gracefully.
(Gnat1drv): Exit with errors if the main source could not be parsed,
because of preprocessing errors.
(Check_Rep_Info): New procedure
2007-06-06 Robert Dewar <dewar@adacore.com>
* g-hesorg.ads, g-heasor.ads,
g-busorg.ads, g-bubsor.ads: Update documentation
GNAT.Heap/Bubble_Sort_G is now pure
2007-06-06 Robert Dewar <dewar@adacore.com>
* g-catiio.ads, g-catiio.adb (Image): Check for null picture string
2007-06-06 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* g-comlin.ads, g-comlin.adb:
Add new warning for renaming of function return objects
* opt.adb (Tree_Write, Tree_Read): Use proper expressions for size
(Tree_Read): Use size of object instead of type'object_size, since the
latter is incorrect for packed array types.
(Tree_Write): Same fix
* opt.ads: Add new warning for renaming of function return objects
(Generating_Code): New boolean variable used to indicate that the
frontend as finished its work and has called the backend to process
the tree and generate the object file.
(GCC_Version): Is now private
(Static_Dispatch_Tables): New constant declaration.
(Overflow_Checks_Unsuppressed): New flag.
(Process_Suppress_Unsuppress): Set Overflow_Checks_Unsuppressed.
(List_Closure): New flag for gnatbind (-R)
Zero_Formatting: New flag for gnatbind (-Z)
(Special_Exception_Package_Used): New flag.
(Warn_On_Unrepped_Components): New flag.
* sem_ch8.adb (Check_Library_Unit_Renaming): Check that the renamed
unit is a compilation unit, rather than relying on its scope, so that
Standard can be renamed.
(Analyze_Object_Renaming): Add new warning for renaming of function
return objects.
Also reject attempt to rename function return object in Ada 83 mode.
(Attribute_Renaming): In case of tagged types, add the body of the
generated function to the freezing actions of the type.
(Find_Type): A protected type is visible right after the reserved word
"is" is encountered in its type declaration. Set the entity and type
rather than emitting an error message.
(New_Scope): Properly propagate Discard_Names to inner scopes
(Check_Nested_Access): New procedure.
(Has_Nested_Access, Set_Has_Nested_Access): New procedures.
(Find_Direct_Name, Note_Possible_Modification): Use Check_Nested_Access.
* sem_warn.ads, sem_warn.adb: Improvements to infinite loop warning
Add new warning for renaming of function return objects
(Check_References): Suppress warnings for objects whose type or
base type has Warnings suppressed.
(Set_Dot_Warning_Switch): Add processing for -gnatw.c/C
(Set_Warning_Switch): Include new -gnatwc in -gnatwa
2007-06-06 Vincent Celier <celier@adacore.com>
Emmanuel Briot <briot@adacore.com>
Olivier Hainque <hainque@adacore.com>
* g-debpoo.ads, g-debpoo.adb (Free_Physically.Free_Blocks): Use the
absolute value of Header.Block_Size when displaying the freed physical
memory in traces.
(Allocate): Compute Storage_Address using Integer_Address, not
Storage_Offset, because the range of Storage_Offset may not be large
enough.
(Configure): New parameter Low_Level_Traces
(Allocate, Deallocation, Free_Physically): Added low-level traces
(Configure): new parameter Errors_To_Stdout.
(Output_File): new subprogram
(Deallocate, Dereference): Send error messages to the proper stream
(Print_Pool, Print_Info_Stdout): Make sure the output goes to stdout, as
documented. Previous code would send it to the current output file
defined in GNAT.IO, which might not be stdout
(Is_Valid): Adjust comment to mention that a positive reply means that
Header_Of may be used to retrieve the allocation header associated with
the subprogram Storage address argument. Return False early if this
address argument is misaligned.
2007-06-06 Vincent Celier <celier@adacore.com>
* gnatcmd.adb (GNATCmd): Accept switch -aP for commands that accept
switch -P
(ASIS_Main): New global variable
(Get_Closure): New procedure
(GNATCmd): Set ASIS_Main when -P and -U with a main is used for gnat
check, metric or pretty. Call Get_Closure in this case.
(Check_Files): For GNAT LIST, check all sources of all projects when
All_Projects is True.
(GNATCmd): Accept -U for GNAT LIST
2007-06-06 Vincent Celier <celier@adacore.com>
* gnatlink.adb (Gnatlink): Do not specify -static-libgcc when --LINK=
has been specified
Correct error message when invocation of the linker fails
Add explicit size clause for the C imported variables
Object_List_File_Supported and Using_GNU_Linker to emphasize that
we expect char size.
Read target parameters earlier, since this is needed to set
Target_VM properly. Also do not use -static/shared-libgcc for non GCC
targets.
2007-06-06 Vincent Celier <celier@adacore.com>
* gnatls.adb:
Add 3 spaces before the default project directory when displaying
the project search path.
Add new command line switch '-l' to display license information.
2007-06-06 Vasiliy Fofanov <fofanov@adacore.com>
* gmem.c: Add support for timestamps on memory operations.
* memtrack.adb, gnatmem.adb: Add support for timestamps on memory
operations (not used currently, just foundation for future
enhancements). Add possibility to perform full dump of gmem.out file.
(Print_Back_Traces): Declare accesses to root arrays constants since
they aren't modified.
(Print_Back_Traces): allocate root arrays on the heap rather than stack.
2007-06-06 Vincent Celier <celier@adacore.com>
* gnatsym.adb: Update Copyright notice
(Parse_Cmd_Line): Accept new switch -D
(Gnatsym): In Direct policy (switch -D) copy reference file to symbol
file.
* prj.ads (Policy): New policy Direct
(Yes_No_Unknown): New enumeration type
(Project_Data): New component Libgnarl_Needed
* prj-nmsc.adb (Check_For_Source): When recording a source file make
use the untouched pathname casing.
(Get_Directories): Ensure that the Display_Exec_Directory is using the
proper casing on non case-sensitive platforms like Windows.
(Get_Unit): Accept file names x__... and x~... (where x = a, g, i or s)
on all platforms, as it is not possible to know which one is allowed
before processing the project files.
(Check_Stand_Alone_Library): Check that Library_Reference_Symbol_File is
specified when symbol policy is Direct. Check that when there is a
symbol file defined (either by default or with attribute
Library_Symbol_File) it is not the same as the reference symbol file.
(Check_Stand_Alone_Library): Recognize new symbol policy Direct.
(Look_For_Sources): Allow Locally_Removed_Files to be declare in non
extending projects.
(Record_Ada_Source): Record a source that has been locally removed in an
imported project.
* symbols.ads (Policy): New policy Direct
* symbols-vms.adb (Initialize): Take new policy Direct in case
statement
2007-06-06 Vincent Celier <celier@adacore.com>
* g-os_lib.ads, g-os_lib.adb (Normalize_Pathname.Get_Directory):
Correct obvious bug (return Dir; instead of return Directory;).
(Normalize_Pathname): Use Reference_Dir'Length, not Reference_Dir'Last
2007-06-06 Thomas Quinot <quinot@adacore.com>
* g-pehage.adb (Produce): Open output files in Binary mode, so that
they have UNIX line endings (LF only) even on Windows, and thus pass
all GNAT style checks.
2007-06-06 Emmanuel Briot <briot@adacore.com>
* g-regpat.adb (Quote): Fix improper quoting of '.'
2007-06-06 Thomas Quinot <quinot@adacore.com>
* g-soccon.ads: Add new constant Thread_Blocking_IO, always True by
default, set False on a per-runtime basis.
(Need_Netdb_Buffer): New constant.
* g-socket.ads, g-socket.adb: Import new package
GNAT.Sockets.Thin.Task_Safe_NetDB.
(Raise_Host_Error): Use Host_Error_Message from platform-specific thin
binding to obtain proper message.
(Close_Selector): Use GNAT.Sockets.Thin.Signalling_Fds.Close.
Replace various occurrences of Arry (Arry'First)'Address with the
equivalent Arry'Address (GNAT always follows implementation advice from
13.3(14)).
(Get_Host_By_Address, Get_Host_By_Name,
Get_Service_By_Name, Get_Service_By_Port): Do not use GNAT.Task_Lock;
instead, rely on platform-specific task safe netdb operations provided
by g-socthi.
* g-socthi.ads, g-socthi.adb (Initialize): Remove obsolete formal
parameter Process_Blocking_IO.
(Host_Error_Messages): Add stub body.
(GNAT.Sockets.Thin.Signalling_Fds): New procedure Close.
(Safe_Gethostbyname, Safe_Gethostbyaddr, Safe_Getservbyname,
Safe_Getservbyport): Move functions into new child package
Task_Safe_NetDB.
(Nonreentrant_Gethostbyname, Nonreentrant_Gethostbyaddr,
Nonreentrant_Getservbyname, Nonreentrant_Getservbyport): New routines.
(In_Addr): Add alignment clause.
2007-06-06 Robert Dewar <dewar@adacore.com>
* g-trasym.ads, g-traceb.ads: Update list of supported targets
Add note about symbolic traceback
2007-06-06 Pascal Obry <obry@adacore.com>
* hostparm.ads (Normalized_CWD): Use the host directory separator
instead of the hardcoded forward slash which is not the proper
character on Windows for example.
(Java_VM): Removed.
2007-06-06 Vincent Celier <celier@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* a-clrefi.adb, a-clrefi.ads: New files
* impunit.adb: Add s-os_lib in the list of user visible units.
(Non_Imp_File_Names_95): Add a-clrefi to this list
Remove obsolete run-time entries.
(Non_Imp_File_Names_05): Add Ada 2005 entries for:
"a-exetim" -- Ada.Execution_Time
"a-extiti" -- Ada.Execution_Time.Timers
* mlib-prj.ads, mlib-prj.adb
(Build_Library): Use untouched object dir and library dir. At the
same time makes sure that the checks are done using the canonical
form. Removes hard-coded directory separator and use the proper host
one instead.
(Process_Project): Do not look in object directory to check if libgnarl
is needed for a library, if there is no object directory.
(Build_Library): Scan the ALI files to decide if libgnarl is needed for
linking.
(Build_Library): When invoking gnatbind, use a response file if the
total size of the arguments is too large.
* Makefile.rtl: (g-sttsne): New object file.
Add entry for a-clrefi, s-utf_32, System.Exceptions
* Make-lang.in: Remove bogus dependency of s-memory.o on memtrack.o.
(GNAT_ADA_OBJS, GNATBIND_OBJS): Add s-except.o.
(GNATBIND_OBJS): Add new objects a-clrefi.o and a-comlin.o
Change g-string to s-string, g-os_lib to s-os_lib
Change all g-utf_32 references to s-utf_32
2007-06-06 Tristan Gingold <gingold@adacore.com>
Olivier Hainque <hainque@adacore.com>
* init.c: Do not adjust IP of an imported VMS exception of ia64.
LIB$STOP is called to raise an exception and the IP of the exception
is the instruction right after the call.
(__gnat_adjust_context_for_raise, AIX): Implement.
(__gnat_error_handler, AIX): Accept SIGINFO related arguments and call
adjust_context_for_raise before Raise_From_Signal_Hanler.
(__gnat_install_handler, AIX): Add SA_SIGINFO to the sa_flags, to ensure
siginfo is passed to the handler, necessary to let the zcx propagation
engine unwind past it.
2007-06-06 Olivier Hainque <hainque@adacore.com>
* initialize.c (__gnat_initialize for vxworks): Update documentation
on the ZCX support, using different sets of crtstuff objects than with
GCC 3.4.
2007-06-06 Robert Dewar <dewar@adacore.com>
* layout.ads, layout.adb (Adjust_Esize_Alignment): Move spec to package
spec from body
(Layout_Type): Fix recomputation of size from alignment.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_ch12.adb (Analyze_Associations): Diagnose use of an others
association in an instance.
(Copy_Generic_Node): If the node is a string literal, no need to copy
its descendants.
(Is_Generic_Formal): For a formal subprogram, the declaration is the
grandparent of the entity.
(Analyze_Formal_Interface_Type): Transform into a full type declaration,
to simplify handling of formal interfaces that derive from other formal
interfaces.
(Instantiate_Subprogram_Body): The defining unit name of the body of
the instance should be a defining identifier.
(Install_Formal_Packages): make global to the package, for use in
instantiations of child units.
(Analyze_Package_Instantiation): Do not attempt to set information on an
enclosing master of an entry when expansion is disabled.
(Instantiate_Type): If the actual is a tagged synchronized type and the
generic ancestor is an interface, create a generic actual for the
corresponding record.
(Analyze_Formal_Derived_Interface_Type): Rewrite as a derived type
declaration, to ensure that the interface list is processed correctly.
(Inline_Instance_Body): If enclosing scope is an instance body, remove
its entities from visibiility as well.
(Pre_Analyze_Actuals): if the actual is an allocator with constraints
given with a named association, analyze the expression only, not the
discriminant association itself.
(Reset_Entity): If the analysis of a selected component is transformed
into an expanded name in the prefix of a call with parameters, do not
transform the original node into an expanded name, to prevent visibility
errors in the case of nested generics.
(Check_Private_View): For an array type, check whether the index types
may need exchanging.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
Vincent Celier <celier@adacore.com>
* lib-writ.adb: Handle Convention_CIL in addition to Convention_Java,
since both are separated.
Add support for imported CIL packages.
Add further special handling of "value_type" for CIL.
Add special handling of pragma Import for CIL.
* make.ads, make.adb: When switch -eS is used, direct all outputs to
standard output instead of standard error, except errors.
(Absolute_Path): Use untouched casing for the parent directory.
(Add_Library_Search_Dir): Use the untouched directory name.
(Add_Source_Search_Dir): Idem.
(Change_To_Object_Directory): Update output to use proper casing.
(Create_Binder_Mapping_File): Use the untouched filename to set
ALI_Name.
(Gnatmake): Use untouched library and executable directory names.
(Insert_Project_Sources): Use untouched filename for spec and body.
(Is_In_Object_Directory): Use untouched object directory.
(Mark_Directory): Idem.
(Collect_Arguments_And_Compile): Ensure that Full_Source_File always
contains the non-canonical filename in all cases.
(Change_To_Object_Directory): In verbose mode, display the name of the
object directory we're changing to.
(Compile_Sources): Make sure, when a project file is used, to compile
the body of the unit, when there is one, even when only the spec is
recorded in an ALI file.
(Gcc_Switches, Binder_Switches, Linker_Switches): Tables moved from the
spec to the body.
(Report_Compilation_Failed): New procedure
(Bind, Display_Commands, Compile_Sources, Initialize, Scan_Make_Arg):
procedures moved from the spec to the body.
(Extract_Failure): Removed, not used
Replace explicit raises of exception Bind_Failed and Link_Failed with
calls to Make_Failed with the proper message.
Replace explicit raises of exception Compilation_Failed with calls to
procedure Report_Compilation_Failed.
(Initialize): Create mapping files unconditionally when using project
files.
* sem_mech.adb: (Name_CIL, Name_CIL_Constructor, Convention_CIL,
Pragma_CIL_Constructor): New names.
* targparm.ads, targparm.adb
(Compiler_System_Version): Removed, no longer used.
(Get_Target_Parameters): Relax checks on system.ads validity. Add
handling of two new system flags: JVM and CLI.
2007-06-06 Jose Ruiz <ruiz@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* Makefile.in (LIBGNAT_TARGET_PAIRS for VxWorks 6): For the RTP run
time, use the default s-interr body that provides interrupt support
based on signals.
(LIBGNAT_TARGET_PAIRS for x86-linux): Use specialized versions of
a-exetim.ad{s,b}, a-extiti.ad{s,b}, a-rttiev.ad{s,b}, s-osinte.ad{s,b},
g-soccon.ads, and s-taprop.adb for the marte run time.
(EXTRA_GNATRTL_TASKING_OBJS for x86-linux): Execution time clocks and
timers are supported on marte.
(EH_MECHANISM for marte): Do not use ZCX.
(THREADSLIB for marte): Use -lmarte.
Add mlib-tgt-vms.o to the list of objects for gnatmake for VMS
Add mlib-tgt-specific.o to gnatmake objects
mlib-tgt-<platforms>.adb is now the body of MLib.Tgt.Specific, no
longer of MLib.Tgt.
(LIBGNAT_TARGET_PAIRS for vxworks): When building a run time for VxWorks
6, either kernel or rtp, use a specialized version of s-osinte.ads.
2007-06-06 Pascal Obry <obry@adacore.com>
* mkdir.c (__gnat_mkdir): Add support for UTF-8.
2007-06-06 Vincent Celier <celier@adacore.com>
* mlib.ads, mlib.adb (Build_Library): Do not use hard-coded directory
separator, use instead the proper host directory separator.
(Copy_ALI_Files): Make sure that an already existing ALI file in the
ALI copy dir is writable, before doing the copy.
* mlib-utl.ads, mlib-utl.adb:
(Gcc): If length of command line is too long, put the list of object
files in a response file, if this is supported by the platform.
(Ar): If invocation of the archive builder is allowed to be done in
chunks and building it in one shot would go above an OS dependent
limit on the number of characters on the command line, build the archive
in chunks.
2007-06-06 Vincent Celier <celier@adacore.com>
* osinte-c.ads, osint-c.adb (Set_Library_Info_Name): Fail if base name
of specified object file is not equal to base name of source.
2007-06-06 Javier Miranda <miranda@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch3.adb (Process_Full_View): Propagate the CPP_Class attribute to
the full type declaration.
(Analyze_Component_Declaration): Add local variable E to capture the
initialization expression of the declaration. Replace the occurences of
Expression (N) with E.
(OK_For_Limited_Init_In_05): Allow initialization of class-wide
limited interface object with a function call.
(Array_Type_Declaration): If the declaration lacks subtype marks for
indices, create a simple index list to prevent cascaded errors.
(Is_Null_Extension): Ignore internal components created for secondary
tags when checking whether a record extension is a null extension.
(Check_Abstract_Interfaces): Add missing support for interface subtypes
and generic formals.
(Derived_Type_Declaration): Add missing support for interface subtypes
and generic formals.
(Analyze_Object_Declaration): If an initialization expression is
present, traverse its subtree and mark all allocators as static
coextensions.
(Add_Interface_Tag_Component): When looking for components that may be
secondary tags, ignore pragmas that can appear within a record
declaration.
(Check_Abstract_Overriding): an inherited function that dispatches on
result does not need to be overriden if the controlling type is a null
extension.
(Mentions_T): Handle properly a 'class attribute in an anonymous access
component declaration, when the prefix is an expanded name.
(Inherit_Component): If the derivation is for a private extension,
inherited components remain visible and their ekind should not be set
to Void.
(Find_Type_Of_Object): In the case of an access definition, always set
Is_Local_Anonymous_Access. We were previously not marking the anonymous
access type of a return object as a local anonymous type.
(Make_Index): Use Ambiguous_Character to report ambiguity on a discrete
range with character literal bounds.
(Constrain_Array): Initialize the Packed_Array_Type field to Empty.
(Access_Subprogram_Declaration): Indicate that the type declaration
depends on an incomplete type only if the incomplete type is declared
in an open scope.
(Analyze_Subtype_Declaration): Handle properly subtypes of
synchronized types that are tagged, and that may appear as generic
actuals.
(Access_Subprogram_Declaration): An anonymous access to subprogram can
appear as an access discriminant in a private type declaration.
(Add_Interface_Tag_Components): Complete decoration of the component
containing the tag of a secondary dispatch table and the component
containing the offset to the base of the object (this latter component
is only generated when the parent type has discriminants --as documented
in this routine).
(Inherit_Components): Use the new decoration of the tag components to
improve the condition that avoids inheriting the components associated
with secondary tags of the parent.
(Build_Discriminanted_Subtype): Indicate to the backend that the
size of record types associated with dispatch tables is known at
compile time.
(Analyze_Subtype_Declaration): Propagate Is_Interface flag when needed.
(Analyze_Interface_Declaration): Change setting of Is_Limited_Interface
to include task, protected, and synchronized interfaces as limited
interfaces.
(Process_Discriminants): Remove the setting of
Is_Local_Anonymous_Access on the type of (anonymous) access
discriminants of nonlimited types.
(Analyze_Interface_Type_Declaration): Complete the decoration of the
class-wide entity it is is already present. This situation occurs if
the limited-view has been previously built.
(Enumeration_Type_Declaration): Initialize properly the Enum_Pos_To_Rep
field.
(Add_Interface_Tag_Components.Add_Tag): Set the value of the attribute
Related_Interface.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
* sem_aggr.adb (Resolve_Record_Aggregate): Ignore internal components
of the type that specify the position of interface tags when the type
inherits discriminated array components from the parent type.
If a component is initialized with a box, check for the presence of a
default expression in its declaration before using its default
initialization procedure.
(Resolve_Record_Aggregate): If a component is box-initialized, and the
component type has a discriminants, create a partial aggregate for it
by copying the discriminants of the component subtype.
Reject attempt to initialize a discriminant with a box.
(Array_Aggr_Subtype): Indicate to the backend that the size of arrays
associated with dispatch tables is known at compile time.
(Get_Value): If an association in a record aggregate has a box
association, and the corresponding record component has a default
expression, always copy the default expression, even when the
association has a single choice, in order to create a proper
association for the expanded aggregate.
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* par-ch12.adb (P_Generic_Associations): The source position of an
Others association is that of the others keyword, not that of the token
that follows the box.
(P_Formal_Type_Definition): Handle formal access types that carry a
not null indicator.
* par-ch3.adb (P_Known_Discriminant_Part_Opt, P_Component_Items): If
multiple identifier are present, save Scan_State before scanning the
colon, to ensure that separate trees are constructed for each
declaration.
(P_Identifier_Declarations): For object declaration, set new flag
Has_Init_Expression if initialization expression present.
(P_Null_Exclusion): Properly diagnose NOT NULL coming before NULL
Improve NOT NULL error messages
2007-06-06 Robert Dewar <dewar@adacore.com>
* par-ch4.adb: (P_Name): Recover from literal used as name
2007-06-06 Vincent Celier <celier@adacore.com>
* prep.ads, prep.adb (Expression): New Boolean parameter Complemented,
defaulted to False.
In the "not" case, recursive call with Complemented set to True.
Do not allow "or" or "and" operators when Complemented is True.
2007-06-06 Vincent Celier <celier@adacore.com>
* prj.adb (Project_Empty): Gives default value for new component
Libgnarl_Needed
* prj-attr.ads: Minor reformatting
* prj-env.ads, prj-env.adb (For_All_Object_Dirs): Register object
directory using the untouched casing.
(For_All_Source_Dirs): Idem.
* prj-ext.ads, prj-ext.adb (Search_Directories): New table to record
directories specified with switches -aP.
(Add_Search_Project_Directory): New procedure
(Initialize_Project_Path): Put the directories in table
Search_Directories in the project search path.
(Initialize_Project_Path): For VMS, transform into canonical form the
project path.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* restrict.ads, restrict.adb (No_Exception_Handlers_Set): Only return
true if configurable run-time or No_Run_Time is set.
(Set_Restriction): Avoid setting restriction No_Elaboration_Code when
processing an unit which is not the one being compiled.
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* s-arit64.adb: Replace System.Pure_Exceptions by Ada 05 syntax.
Replace UC by Ada.UC
* s-bitops.adb: Get rid of System.Pure_Exceptions.
Replace UC by Ada.UC
2007-06-06 Robert Dewar <dewar@adacore.com>
* scng.adb: (Check_End_Of_Line): Deal with very long lines
2007-06-06 Robert Dewar <dewar@adacore.com>
* sem.ads, sem.adb (Semantics): Save and restore Global_Discard_Names
Remove no longer used nodes.
2007-06-06 Javier Miranda <miranda@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* sem_ch10.ads, sem_ch10.adb (Analyze_Compilation_Unit): Disable check
on obsolescent withed unit in case of limited-withed units.
(Analyze_Compilation_Unit): Add guard to code that removed an
instantiation from visibility, to prevent compiler aborts when
instantiation is abandoned early on.
(Install_Limited_Withed_Unit): Recognize a limited-with clause on the
current unit being analyzed, and Distinguish local incomplete types
from limited views of types declared elsewhere.
(Build_Limited_Views.Decorate_Tagged_Type): Add documentation
to state that the class-wide entity is shared by the limited-view
and the full-view.
(Analyze_With_Clause): Improve placement of flag for case of
unimplemented unit.
(Analyze_With_Clause): Recognize use of GNAT.Exception_Traces in a
manner similar to GNAT.Current_Exception. This is a violation of
restriction (No_Exception_Propagation), and also inhibits the
optimization of local raise to goto.
(Analyze_With_Clause): Check for Most_Recent_Exception being with'ed,
and if so set Most_Recent_Exception_Used flag in Opt, and also check
for violation of restriction No_Exception_Propagation.
2007-06-06 Javier Miranda <miranda@adacore.com>
Hristian Kirtchev <kirtchev@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* sem_ch11.adb (Analyze_Exception_Handlers): Add barrier to avoid the
use of entity Exception_Occurrence if it is not available in the
target run-time.
* sem_ch9.adb (Analyze_Protected_Type, Analyze_Task_Type): When
concurrent types are declared within an Ada 2005 generic, build their
corresponding record types since they are needed for overriding-related
semantic checks.
(Analyze_Protected_Type): Rearrange and simplify code for testing that a
protected type does not implement a task interface or a nonlimited
interface.
(Analyze_Task_Type): Rearrange and simplify code for testing that a task
type does not implement a protected interface or a nonlimited interface.
(Single_Task_Declaration, Single_Protected_Declaration): use original
entity for variable declaration, to ensure that debugging information
is correcty generated.
(Analyze_Protected_Type, Analyze_Task_Type): Do not call expander
routines if the expander is not active.
(Analyze_Task_Body): Mark all handlers to stop optimization of local
raise, since special things happen for task exception handlers.
* sem_disp.adb (Check_Controlling_Formals): Add type retrieval for
concurrent types declared within a generic.
(Check_Dispatching_Operation): Do not emit warning about late interface
operations in the context of an instance.
(Check_Dispatching_Call): Remove restriction against calling a
dispatching operation with a limited controlling result.
(Check_Dispatching_Operation): Replace calls to Fill_DT_Entry and
Register_Interface_DT_Entry by calls to Register_Primitive.
(Check_Dispatching_Formals): Handle properly a function with a
controlling access result.
2007-06-06 Robert Dewar <dewar@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* sem_ch13.adb (Analyze_Attribute_Definition_Clause, case Stream_Size):
Check for restriction No_Implementation_Attributes if in Ada 95 mode.
(Storage_Pool): Do not crash when RE_Stack_Bounded_Pool is not available
(Analyze_Attribute_Definition_Clause [External_Tag]): Generate error
message when using a VM, since this attribute is not supported.
(Analyze_Record_Representation_Clause): Give unrepped component warnings
* usage.adb: Add new warning for renaming of function return objects
Indicate that -gnatwp and -gnatwP concern front-end inlining
Add line for -gnatyg
Add usage information for -gnatw.c/C
2007-06-06 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* sem_ch5.adb
(Find_Var): Do not consider function call in test for infinite loop
warning if warnings set off for function entity.
(One_Bound): Do not create a temporary for a loop bound if it is a
character literal.
(Analyze_Assignment): Traverse the right hand side of an assignment and
mark all allocators as static coextensions.
(Analyze_Assignment): Exempt assignments involving a dispatching call
to a function with a controlling access result from the check requiring
the target to be class-wide.
2007-06-06 Hristian Kirtchev <kirtchev@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_res.ads, sem_res.adb (Process_Allocator): Do not propagate the
chain of coextensions when an allocator serves as the root of such a
chain.
(Propagate_Coextensions): Remove the test for the root being an
allocator.
(Resolve_Allocator): Add condition to ensure that all future decoration
occurs on an allocator node. Add processing and cleanup for static
coextensions.
(Valid_Conversion): If the operand type is the limited view of a
class-wide type, use the non-limited view is available to determine
legality of operation.
(Ambiguous_Character): move to spec, for use elsewhere.
(Ambiguous_Character): Handle Wide_Wide_Character in Ada 2005 mode
(Resolve_Range): Diagnose properly an ambiguous range whose bounds are
character literals.
(Resolve_Arithmetic_Op): Call Activate_Division_Check instead of setting
Do_Division_Check flag explicitly.
(Resolve_Actuals): If the actual is of a synchronized type, and the
formal is of the corresponding record type, this is a call to a
primitive operation of the type, that is declared outside of the type;
the actual must be unchecked-converted to the type of the actual
(Resolve_Call): Kill all current values for any subprogram call if
flag Suppress_Value_Tracking_On_Call is set.
(Resolve_Type_Conversion): Generate error message the the operand
or target of interface conversions come from a limited view.
(Check_Infinite_Recursion): Ignore generated calls
(Check_Allocator_Discrim_Accessibility): New procedure for checking
that an expression that constrains an access discriminant in an
allocator does not denote an object with a deeper level than the
allocator's access type.
(Resolve_Allocator): In the case of an allocator initialized by an
aggregate of a discriminated type, check that associations for any
access discriminants satisfy accessibility requirements by calling
Check_Allocator_Discrim_Accessibility.
(Resolve_Equality_Op): Handle comparisons of anonymous access to
subprogram types in the same fashion as other anonymous access types.
(Resolve_Concatenation_Arg): Remove initial character '\' in an error
message that is not a continuation message.
(Resolve_Type_Conversion): Add missing support for conversion to
interface type.
(Resolve_Actuals): Introduce a transient scope around the call if an
actual is a call to a function returning a limited type, because the
resulting value must be finalized after the call.
(Resolve_Actuals): If the call was given in prefix notations, check
whether an implicit 'Access reference or implicit dereference must be
added to make the actual conform to the controlling formal.
2007-06-06 Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_ch7.adb (Check_Anonymous_Access_Types): Fix error for null body
(Derive_Inherited_Private_Subprogram): Code cleanup. In case of explicit
overriding of an inherited private subprogram now there is no need to
inherit its dispatching slot and reduce the size of the dispatch table.
Set_All_DT_Position now ensures that the same slot is now assigned to
both entities. This is required to statically build the dispatch table.
(Declare_Inherited_Private_Subprograms): Rewriten to avoid the need
of calling Set_All_DT_Position to re-evaluate the position of the
entries in the dispatch table. Such reevaluation is not desired if
the tagged type is already frozen.
2007-06-06 Hristian Kirtchev <kirtchev@adacore.com>
Gary Dismukes <dismukes@adacore.com>
Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_util.ads, sem_util.adb (May_Be_Lvalue): A prefix of an attribute
reference acts as an lvalue when the attribute name modifies the prefix
(Is_Coextension_Root): New routine.
(Mark_Static_Coextensions): New routine.
(Type_Access_Level): Revise code for checking the level of the
anonymous access type of a return object.
(Safe_To_Capture_Value): Not safe to capture if Address_Taken
(Matches_Prefixed_View_Profile): Remove the no longer necessary
retrieval of the corresponding controlling record type.
(Find_Overridden_Synchronized_Primitive): Code cleanup. Add handling of
concurrent types declared within a generic as well as class wide types.
Emit a mode incompatibility error whenever a protected entry or routine
override an interface routine whose first parameter is not of mode
"out", "in out" or access to variable.
(Overrides_Synchronized_Primitive): Rename to
Find_Overridden_Synchronized_Primitive.
(Collect_Interface_Components): New subprogram that collects all the
components of a tagged record containing tags of secondary dispatch
tables.
(Add_Global_Declaration): New procedure
(Abstract_Interface_List): Handle properly the case of a subtype of a
private extension.
(Type_Access_Level): In the case of a type whose parent scope is a
return statement, call Type_Access_Level recursively on the enclosing
function's result type to determine the level of the return object's
type.
(Build_Elaboration_Entity): Build name of elaboration entity from the
scope chain of the entity, rather than the unit name of the file name.
(Check_Nested_Access): New procedure.
(Has_Up_Level_Access, Set_Has_Up_Level_Access): New procedures.
(Find_Direct_Name, Note_Possible_Modification): Use Check_Nested_Access.
(Get_Renamed_Entity): Utility routine for performing common operation
of chasing the Renamed_Entity field of an entity.
2007-06-06 Robert Dewar <dewar@adacore.com>
* sem_elab.adb (Check_A_Call): Specialize elaboration warnings on
elaboration model
(Check_A_Call): Add check for entry call which was causing blowup
2007-06-06 Olivier Hainque <hainque@adacore.com>
* raise-gcc.c (__gnat_eh_personality): Tweak the signature and add
special code on ia64-vms to handle major incompatibilities between the
GCC unwinding ABI and the VMS Condition Handling Facility, both calling
this routine with a very different set of arguments and expectations on
the return value.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* socket.c (__gnat_close_signalling_fd): New function.
(__gnat_safe_gethostbyaddr, __gnat_safe_gethostbyname,
__gnat_safe_getservbyname, __gnat_safe_getservbyport):
New supporting functions for task safe Netdb operations.
2007-06-06 Thomas Quinot <quinot@adacore.com>
Olivier Hainque <hainque@adacore.com>
* a-except-2005.ads, a-except-2005.adb
(Raise_From_Controlled_Operation): New procedure in
(private part of) Ada.Exceptions (standard runtime version). Used to
provide informational exception message when Program_Error is raised as
a result of an Adjust or Finalize operation propagating an exception.
(Rmsg_28): Fix description for E.4(18) check.
(Raise_Current_Excep): Call Debug_Raise_Exception just before
propagation starts, to let debuggers know about the event in a reliable
fashion.
Take the address of E and dereference to make sure it is homed on stack
and prevent the stores from being deleted, necessary for proper
debugger behavior on "break exception" hits.
(Local_Raise): Moved to System.Exceptions
* s-finimp.adb (Raise_From_Finalize): Code to construct an appropriate
exception message from the current occurrence and raise Program_Error
has been moved to Ada.Exceptions.Raise_From_Controlled_Operation.
2007-06-06 Jose Ruiz <ruiz@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* s-taprob.adb (Unlock): Change the ceiling priority of the underlying
lock, if needed.
* s-taprop.ads (Set_Ceiling): Add this procedure to change the ceiling
priority associated to a lock.
* s-tpoben.adb ([Vulnerable_]Complete_Task, Lock_Entries): Relax
assertion to take into account case of no abort restriction.
(Initialize_Protection_Entries): Add initialization for the field
New_Ceiling associated to the protected object.
(Unlock_Entries): Change the ceiling priority of the underlying lock, if
needed.
* s-solita.adb (Get_Current_Excep): Moved back to s-tasini/s-tarest,
since this function needs to be set consistently with Update_Exception.
* s-tarest.adb (Get_Current_Excep): Moved back to s-tasini/s-tarest,
since this function needs to be set consistently with Update_Exception.
* s-taskin.ads: Update comments on
Interrupt_Server_Blocked_On_Event_Flag.
(Unbind_Handler): Fix handling of server_task wakeup
(Server_Task): Set self's state so that Unbind_Handler can take
appropriate actions.
(Common_ATCB): Now use a constant from System.Parameters to determine
the max size of the Task_Image field.
* s-tassta.adb (Task_Wrapper): Now pass the overflow guard to the
Initialize_Analyzer function.
([Vulnerable_]Complete_Task, Lock_Entries): Relax assertion to
take into account case of no abort restriction.
([Vulnerable_]Complete_Master): Modify assertion.
* s-tataat.adb (Finalize): Use the nestable versions of
Defer/Undefer_Abort.
* s-tpobop.adb (Protected_Entry_Call): Relax assertion.
* s-tpobop.ads: Update comments.
* s-tposen.adb (Protected_Single_Entry_Call): Call Lock_Entry instead
of locking the object manually, to avoid inconsistencies between
Lock/Unlock_Entry assertions.
* s-interr.ads, s-interr.adb (Server_Task): Fix race condition when
terminating
application and System.Parameters.No_Abort is True.
Update comments on Interrupt_Server_Blocked_On_Event_Flag.
(Unbind_Handler): Fix handling of server_task wakeup
(Server_Task): Set self's state so that Unbind_Handler can take
appropriate actions.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* s-finroo.ads, s-finroo.adb (Read, Write): Use null procedure
declarations instead of an explicit null body, for conciseness.
2007-06-06 Robert Dewar <dewar@adacore.com>
* sem_eval.adb (Eval_Relational_Op): nothing to do if an operand is an
illegal aggregate and the type is still Any_Composite.
(Subtypes_Statically_Match): Fix problem of empty discriminant list
2007-06-06 Ed Schonberg <schonberg@adacore.com>
* sem_smem.adb (Check_Shared_Var): Check explicitly for as task object,
to prevent subsequent expansion.
2007-06-06 Robert Dewar <dewar@adacore.com>
* sinput-l.ads, sinput-l.adb: implement a new pragma No_Body
2007-06-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* sprint.ads, sprint.adb (Sprint_Node_Actual): Output aggregate for
exceptions.
(Write_Itype): Handle case of string literal subtype, which
comes up in this context.
(Update_Itype): when debugging expanded code, update sloc of itypes
associated with defining_identifiers and ranges, for gdb use.
(Sprint_Node_Actual): Add static keyword to object or exception
declaration output if Is_Statically_Allocated is True.
(Sprint_End_Label): Set entity of end marker for a subprogram, package,
or task body, so that the tree carries the proper Sloc information for
debugging use.
(Write_Indent): In Dump_Source_Text mode, ignore implicit label nodes
2007-06-06 Arnaud Charlet <charlet@adacore.com>
* s-secsta.adb (Chunk): Ensure this object has a static size known at
compile time, to avoid dynamic memory allocation
(Elaboration code): Only use dynamic memory allocation when needed.
2007-06-06 Quentin Ochem <ochem@adacore.com>
* s-stausa.ads, s-stausa.adb (Initialize_Analyzer): Added parameter
"Overflow_Guard".
(Stack_Analyzer): Added field "Overflow_Guard"
(Task_Result): Added field "Overflow_Guard".
(Index_Str): New constant.
(Task_Name_Str): New constant.
(Actual_Size_Str): New constant.
(Pattern_Array_Element_Size): New constant.
(Get_Usage_Range): New subprogram.
(Output_Result): Added parameter Max_Size_Len and Max_Actual_Use_Len.
Now align the output.
Added comments.
(Initialize): Added value for Overflow_Guard.
(Fill_Stack): Use constant Pattern_Array_Elem_Size when relevant.
Update the value of the overflow guard according to the actual
beginning of the pattern array.
(Initialize_Analyzer): Added parameter Overflow_Guard.
Take this parameter into accound when computing the max size.
(Compute_Result): Use constant Pattern_Array_Elem_Size when relevant.
(Report_Result): Removed extra useless procedure.
Updated call to Output_Result.
Moved full computation of the Task_Result here.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* g-soccon-darwin.ads, gen-soccon.c: Add new constant
Thread_Blocking_IO, always True by default, set False on a per-runtime
basis.
Add Windows-specific constants
Add new constant Need_Netdb_Buffer.
Add new macros to indicate whether getXXXbyYYY is thread safe and, if
not, whether to use getXXXbyYYY_r.
* gsocket.h: Add new constant Need_Netdb_Buffer.
Add new macros to indicate whether getXXXbyYYY is thread safe and, if
not, whether to use getXXXbyYYY_r.
2007-06-06 Eric Botcazou <ebotcazou@adacore.com>
* s-stoele.ads, s-stoele.adb: Move inline_always subprograms earlier
than their first call.
Add type Dummy_Communication_Block used in the generation of the pre-
defined dispatching primitive _disp_asynchronous_select.
(Storage_Element): Put Pragma Universal_Aliasing on it.
2007-06-06 Vincent Celier <celier@adacore.com>
* a-dirval-vms.adb, a-dirval.ads, a-dirval.adb (Windows): New Boolean
function.
* a-dirval-mingw.adb (Is_Valid_Path_Name): Forbid a path with a drive
letter if it is not followed by a '/' or a '\'.
(Windows): New Boolean function
* a-direct.ads, a-direct.adb: Remove unnecessary and misplaced pragma
Ada 2005.
(Containing_Directory): On Windows, keep at least one '/' or '\' after a
drive letter.
(Containing_Directory): Raise Use_Error when the directory is a root
directory.
(Extension): When returning the result, use a conversion to Result_Type,
not a qualification.
2007-06-06 Robert Dewar <dewar@adacore.com>
* stylesw.ads, stylesw.adb (Set_GNAT_Style_Check): New procedure
(Set_Style_Check_Options): Recognize new -gnatyg style switch
* switch-c.adb (Scan_Front_End_Switches, case -gnatg): Set
Warn_On_Non_Local_Exception to False, to turn off warnings for
No_Exception_Propagation in ZFP runtime.
(Scan_Front_End_Switches): Fix handling of --RTS switch for non GCC
back-ends.
(Scan_Front_End_Switches): For 'g', call Set_GNAT_Style_Checks
2007-06-06 Vincent Celier <celier@adacore.com>
* switch-b.adb (Scan_Binder_Switches): Add processing for new
switches -R and -Z
* switch-m.adb (Normalize_Compiler_Switches): Do not record switch -E
(Scan_Make_Switches): Recognize new switch -aP
2007-06-06 Matthew Gingell <gingell@adacore.com>
Jose Ruiz <ruiz@adacore.com>
* s-stchop-vxworks.adb (Set_Stack_Info): Instead of trying to map the
VxWorks task descriptor in the Ada run time, call a C subprogram
(__gnat_get_stack_info) that extracts the required information.
* sysdep.c: Back out temporary lynxos workaround.
(__gnat_get_stack_info): Add this procedure that passes to the Ada run
time the stack information associated to the currently executing task.
Only VxWorks systems require this function.
2007-06-06 Eric Botcazou <ebotcazou@adacore.com>
* tracebak.c (FRAME_OFFSET): Add parameter FP. On SPARC/Solaris, do not
add the stack bias if the offset is computed from a frame address.
(__gnat_backtrace): Adjust for above change.
2007-06-06 Thomas Quinot <quinot@adacore.com>
* types.h, types.ads: Rename PE_Illegal_CW_Actual_E_4_18 to
PE_Non_Transportable_Actual.
(By_Descriptor_Last): New constant.
(By_Copy_Return): Likewise.
2007-06-06 Vincent Celier <celier@adacore.com>
* vms_conv.adb (Process_Argument): Keep arguments starting with '+' as
is.
* vms_data.ads: Add entries for -gnatw.x and -gnatw.X
/STYLE_CHECKS=GNAT: Change meaning to -gnatyg
/GNAT_INTERNAL: New compiler qualifier corresponding to -gnatg
Add missing comment for /OPTIMIZE=SPACE
Add entry for OPTIMIZE=SPACE
Add new qualifier /ALL_PROJECTS (= -U) for GNAT LIST
Add documentation for new qualifiers corresponding to -gnatw.c/.C
2007-06-06 Vincent Celier <celier@adacore.com>
Robert Dewar <dewar@adacore.com>
* xgnatugn.adb: Allow dots to be used in ug_words (-gnatw.c and
-gnatw.C)
* gnat_ugn.texi: Fix ordering of -g switch for gnatmake
Document gnatbind switch -a
(case Constructions): Document that variables declarations are allowed
for previously declared variables.
Fix external lib project example
-gnatg: Indicate new VMS qualifier /GNAT_INTERNAL
Indicate that "#if not X or Y then" is not allowed in input files to
gnatprep.
Document gnatw.x and gnatw.X warning flags
Mention -Winline switch to activate warnings when back-end inlining is
ineffective.
Add gnatcheck rule descriptions
Describe how to use the GNAT driver to call a tool on a closure.
Describe how to run project-wide checks or metrics.
Document gnatbind's -R option
Updated to account for Ada 2005 support
* gnat_rm.texi (Case Construction): Allow variable declarations for
previously declared variables.
(Representation Clauses and Pragmas): Lift restriction on alignment
clauses for record types.
(Ada.Characters.*): Fix typo in reference to A.3.3(27).
Document No_Exception_Propagation restriction
Document No_Body pragma
Updated to account for Ada 2005 support; corrected some typos
(Implementation Defined Pragmas): Document pragma Universal_Aliasing.
* gnat-style.texi: Make it clear that we never use mode IN for
procedures or functions
* ug_words: Add entries for -gnatw.x and -gnatw.X
Add entries for -gnatw.c/.C
2007-06-06 Pascal Obry <obry@adacore.com>
Vincent Celier <celier@adacore.com>
* makegpr.adb (Add_Archive_Path): Use untouched object and library
dirs and library name.
(Build_Global_Archive): Idem. Minor code clean-up. Removes duplicate
comments.
(Build_Library): Idem.
(Compile_Individual_Sources): Idem.
(Compile_Link_With_Gnatmake): Idem.
(Compile_Sources): Idem.
(Get_Imported_Directories): Idem.
(Link_Executables): Idem. Same change for the executable dir.
(Check_Compilation_Needed): C_Source_Path new variable containing
the canonical form of Source_Path to check against the source names
in the dependency file.
(Build_Global_Archive, Compile_Individual_Sources, Compile_Sources): In
verbose mode, display the name of the object directory we're changing
to.
(Saved_Switches): New name of table X_Switches
(Scan_Arg): Recognize new switch -aP and save in table Saved_Switches
(Usage): New line for switch -aP
(Get_Imported_Directories.Add): Make sure that Add_Arg is True before
testing if a directory should be added to the search path.
2007-06-06 Javier Miranda <miranda@adacore.com>
* a-cidlli.ads, a-cdlili.ads, a-cohama.ads, a-coinve.ads,
a-convec.ads (Empty_Vector, Empty_Map, Empty_List): Move this object
declaration after freezing point of all its associated tagged types;
otherwise such types are frozen too early.
2007-06-06 Robert Dewar <dewar@adacore.com>
* a-reatim.adb: Documentation addition
* g-cgideb.adb: Minor code reorganization
* tree_io.adb, treepr.adb, cstand.adb, krunch.adb, par.adb,
mdll-utl.adb, par-ch5.adb, par-tchk.adb, s-exctab.ads, s-memory.ads,
s-osprim.ads, s-restri.ads, s-soflin.ads: Minor reformatting.
* debug.ads, debug.adb (Get_Debug_Flag_K): Remove unused obsolete
function. Change name New_Scope to Push_Scope
(Get_Debug_Flag_K): Remove unused obsolete function.
* exp_ch8.adb, inline.adb, sem_ch8.ads: Change name New_Scope to
Push_Scope.
* makeusg.adb: Update Copyright notice
Add line for switch -aP
* makeusg.adb: Fix wording of some usage messages
* s-assert.adb (Raise_Assert_Failure): Add call to
Debug_Raise_Assert_Failure.
* s-unstyp.ads (type Packed_Bytes2): Change alignment to use 'Min
(2, Standard'Alignment) for compatibility with AAMP (where alignment
is restricted to 1).
* s-wchjis.adb: Remove use of System.Pure_Exceptions
* tbuild.ads, tbuild.adb (Make_Implicit_Exception_Handler): Set the
node location to No_Location when we're not debugging the expanded
code.
2007-05-22 Alexandre Oliva <aoliva@redhat.com>
* misc.c (enumerate_modes): Consider log2_b to always be one.
2007-05-14 Rafael Ávila de Espíndola <espindola@google.com>
* misc.c (LANG_HOOKS_UNSIGNED_TYPE): Remove.
2007-05-02 Pascal Obry <obry@adacore.com>
* gnatchop.adb (Write_Source_Reference_Pragma): Change implementation
to use Stream_IO.File_Type. This is needed to make use of the UTF-8
encoding support of Stream_IO.
(Write_Unit): Idem.
* adaint.h, adaint.c (__gnat_os_filename): New routine. Returns the
filename and corresponding encoding to match the OS requirement.
(__gnat_file_exists): Do not call __gnat_stat() on Windows as this
routine will fail on specific devices like CON: AUX: ...
PR ada/29856: Add missing braces
2007-04-22 Andrew Pinski <andrew_pinski@playstation.sony.com>
PR ada/31660
* ada-tree.h (lang_tree_node): Fix typo in chain_next.
2007-04-21 Jan Hubicka <jh@suse.cz>
* misc.c (gnat_expand_body): Don't call target for destructors,
avoid redundant check on syntax errors.
2007-04-21 Andrew Pinski <andrew_pinski@playstation.sony.com>
* ada-tree.h (lang_tree_node): Use GENERIC_NEXT
instead of checking GIMPLE_STMT_P in chain_next.
2007-04-17 Andreas Krebbel <krebbel1@de.ibm.com>
PR ada/31576
* system-linux-alpha.ads: Disable constant condition warning for the
Default_Bit_Order variable.
* system-linux-s390.ads: Likewise.
* system-linux-s390x.ads: Likewise.
* system-linux-sparc.ads: Likewise.
2007-04-06 Javier Miranda <miranda@adacore.com>
Matt Heaney <heaney@adacore.com>
Robert Dewar <dewar@adacore.com>
a-coprnu.ads, a-cohata.ads, a-chtgop.ads, a-chtgop.adb, a-cgcaso.ads,
a-cgarso.ads, a-secain.ads, a-slcain.ads, a-shcain.ads, a-chtgke.ads,
a-chtgke.ads, a-coprnu.ads, a-contai.ads, a-chtgke.ads, a-chtgke.adb,
a-stwiha.ads, a-strhas.ads, a-lfztio.ads, a-liztio.ads, a-llfzti.ads,
a-llizti.ads, a-sfztio.ads, a-siztio.ads, a-ssizti.ads, a-stzfix.ads,
a-stzhas.ads, a-szuzha.ads, a-tiunio.ads, a-wwunio.ads, a-ztcoio.ads,
a-ztinio.ads, a-zttest.ads, a-zzunio.ads, a-astaco.ads, a-charac.ads,
a-chlat1.ads, ada.ads, a-dynpri.ads, a-flteio.ads, a-fwteio.ads,
a-inteio.ads, a-intnam.ads, a-ioexce.ads, a-iwteio.ads, a-lfteio.ads,
a-lfwtio.ads, a-liteio.ads, a-liwtio.ads, a-llftio.ads, a-llfwti.ads,
a-llitio.ads, a-lliwti.ads, a-ncelfu.ads, a-ngcefu.ads, a-ngelfu.ads,
a-nlcefu.ads, a-nlcoty.ads, a-nlelfu.ads, a-nllcef.ads, a-nllcty.ads,
a-nllefu.ads, a-nscefu.ads, a-nscoty.ads, a-nselfu.ads, a-nucoty.ads,
a-nuelfu.ads, a-numeri.ads, a-sfteio.ads, a-sfwtio.ads, a-siteio.ads,
a-siwtio.ads, a-ssitio.ads, a-ssiwti.ads, a-storio.ads, a-strfix.ads,
a-string.ads, a-stwifi.ads, a-titest.ads, a-unccon.ads, a-uncdea.ads,
a-wtcoio.ads, a-wtinio.ads, a-wttest.ads, calendar.ads, directio.ads,
i-c.ads, ioexcept.ads, machcode.ads, sequenio.ads, text_io.ads,
unchconv.ads, unchdeal.ads, a-widcha.ads, a-zchara.ads, a-stboha.ads,
a-stfiha.ads, a-coteio.ads, a-envvar.ads, a-lcteio.ads, a-llctio.ads,
a-scteio.ads, a-swbwha.ads, a-swfwha.ads, a-szbzha.ads, a-szfzha.ads,
a-tiboio.ads, a-wwboio.ads, a-zzboio.ads, a-dispat.ads, a-tgdico.ads,
expander.adb, g-socket.ads, par-labl.adb, sinput-c.adb, s-tarest.ads,
s-stchop.ads, g-expect-vms.adb, s-taprop-lynxos.adb,
s-taprop-tru64.adb, s-taprop-irix.adb,
s-taprop-hpux-dce.adb, s-traceb-hpux.adb,
s-taprop-linux.adb, s-taprop-dummy.adb, s-osprim-unix.adb,
s-osprim-solaris.adb, s-taprop-solaris.adb, s-taprop-vms.adb,
s-osprim-mingw.adb, s-taprop-mingw.adb, s-osprim-posix.adb,
s-taprop-posix.adb, a-exexpr-gcc.adb, a-ststio.adb, a-ststio.ads,
a-textio.adb, a-textio.ads, a-tideau.adb, a-tideau.ads, a-witeio.adb,
a-witeio.ads, a-wtdeau.adb, a-wtdeau.ads, g-calend.adb, g-calend.ads,
g-dirope.adb, g-expect.ads, gnatchop.adb, g-spipat.adb, g-spipat.ads,
s-direio.adb, s-direio.ads, s-fatgen.adb, s-fatgen.ads, s-parint.adb,
s-sequio.adb, s-sequio.ads, s-taprop.ads, s-valdec.adb, s-valdec.ads,
s-valint.adb, s-valint.ads, s-vallld.adb, s-vallld.ads, s-vallli.adb,
s-vallli.ads, s-valllu.adb, s-valllu.ads, s-valrea.adb, s-valrea.ads,
s-valuns.adb, s-valuns.ads, s-valuti.adb, s-valuti.ads, xref_lib.adb,
s-stchop.adb, i-vxwork-x86.ads, a-crbtgo.ads, a-crbtgo.adb,
a-coorse.ads, a-coorse.adb, a-cohama.ads, a-cohama.adb, a-ciorse.ads,
a-ciorse.adb, a-cihama.ads, a-cihama.adb, a-chtgop.ads, a-chtgop.ads,
a-coormu.adb, a-ciormu.adb, a-cihase.adb, a-cihase.ads, a-cohase.adb,
a-cohase.ads, a-swuwha.ads, a-ciormu.ads, a-coormu.ads, a-rbtgso.ads,
a-stunha.ads, a-ciorma.adb, a-coorma.adb, a-ztdeau.adb, a-ztdeau.ads,
a-ztexio.adb, a-ztexio.ads: Addition of null-exclusion to anonymous
access types.
Update documentation.
Minor rewording.
2007-04-06 Robert Dewar <dewar@adacore.com>
* system-linux-ia64.ads, system-freebsd-x86.ads, system-lynxos-ppc.ads,
system-lynxos-x86.ads, system-linux-x86_64.ads, system-tru64.ads,
system-vxworks-sparcv9.ads, system-solaris-x86.ads, system-irix-o32.ads,
system-irix-n32.ads, system-hpux.ads, system-vxworks-m68k.ads,
system-linux-x86.ads, system-vxworks-mips.ads, system-interix.ads,
system-solaris-sparc.ads, system-solaris-sparcv9.ads, system-vms.ads,
system-mingw.ads, system-vms-zcx.ads, system-vxworks-ppc.ads,
system-vxworks-alpha.ads, system-vms_64.ads, system-darwin-ppc.ads,
system-vxworks-x86.ads, system-linux-ppc.ads, system-linux-hppa.ads,
system-hpux-ia64.ads, targparm.adb,
targparm.ads (Functions_Return_By_DSP_On_Target): Removed
* system.ads: Move Functions_Return_By_DSP to obsolete section,
kept for bootstrap purposes only.
2007-04-06 Arnaud Charlet <charlet@adacore.com>
* s-osinte-lynxos-3.ads, s-osinte-hpux.ads, s-osinte-solaris-posix.ads,
s-osinte-freebsd.ads, s-osinte-aix.ads, s-osinte-darwin.ads,
s-taprop-posix.adb (Create_Task): Fix handling of Task_Info.
(PTHREAD_SCOPE_PROCESS, PTHREAD_SCOPE_SYSTEM): New constants.
2007-04-06 Robert Dewar <dewar@adacore.com>
* a-except.adb, a-except.ads, a-except-2005.ads, a-except-2005.adb
(Local_Raise): New dummy procedure called when a raise is converted
to a local goto. Used for debugger to detect that the exception
is raised.
* debug.adb: Document new d.g flag (expand local raise statements to
gotos even if pragma Restriction (No_Exception_Propagation) is not set)
* exp_sel.adb: Use Make_Implicit_Exception_Handler
* exp_ch11.adb (Expand_Exception_Handlers): Use new flag -gnatw.x to
suppress warnings for unused handlers.
(Warn_If_No_Propagation): Use new flag -gnatw.x to suppress
warnings for raise statements not handled locally.
(Get_RT_Exception_Entity): New function
(Get_Local_Call_Entity): New function
(Find_Local_Handler): New function
(Warn_If_No_Propagation): New procedure
(Expand_At_End_Handler): Call Make_Implicit_Handler
(Expand_Exception_Handlers): Major additions to deal with local handlers
(Expand_N_Raise_Constraint_Error, Expand_N_Raise_Program_Error,
Expand_N_Raise_Storage_Error, (Expand_N_Raise_Statement): Add handling
for local raise
* exp_ch11.ads (Get_RT_Exception_Entity): New function
(Get_Local_Call_Entity): New function
* gnatbind.adb (Restriction_List): Add No_Exception_Propagation to list
of restrictions that the binder will never suggest adding.
* par-ch11.adb (P_Exception_Handler): Set Local_Raise_Statements field
to No_Elist.
* restrict.adb (Check_Restricted_Unit): GNAT.Current_Exception may not
be with'ed in the presence of pragma Restriction
(No_Exception_Propagation).
* sem.adb (Analyze): Add entries for N_Push and N_Pop nodes
* sem_ch11.adb (Analyze_Exception_Handler): If there is a choice
parameter, then the handler is not a suitable target for a local raise,
and this is a violation of restriction No_Exception_Propagation.
(Analyze_Handled_Statements): Analyze choice parameters in exception
handlers before analyzing statement sequence (needed for proper
detection of local raise statements).
(Analyze_Raise_Statement): Reraise statement is a violation of the
No_Exception_Propagation restriction.
* s-rident.ads: Add new restriction No_Exception_Propagation
* tbuild.ads, tbuild.adb (Make_Implicit_Exception_Handler): New
function, like Make_Exception_Handler but sets Local_Raise_Statements
to No_List.
(Add_Unique_Serial_Number): Deal with case where this is called during
processing of configuration pragmas.
2007-04-06 Thomas Quinot <quinot@adacore.com>
Pat Rogers <rogers@adacore.com>
Pascal Obry <obry@adacore.com>
* g-stsifd-sockets.adb: New file.
* g-socthi.ads, g-socket.adb, g-socthi-vxworks.adb,
g-socthi-vxworks.ads, g-socthi-mingw.ads, g-socthi-vms.ads,
g-socthi-vms.adb: Move signalling
fd management to a nested package, so that they can conveniently be
moved to a subunit that is shared across Windows, VMS, and VxWorks
(Ada implementation) or completed with imported bodies from socket.c
(UNIX case).
(Read_Signalling_Fd, Write_Signalling_Fd, Create_Signalling_Fds): New
subprograms.
(Check_Selector): Use Read_Signalling_Fd to read and discard data from
the signalling file descriptor.
(Abort_Selector): Use Write_Signalling_Fd to write dummy data to the
signalling file descriptor.
(Create_Selector): Use new C-imported subprogram Create_Signalling_Fds
instead of creating a pair of sockets for signalling here.
* g-socthi.adb: Ditto.
Set the runtime process to ignore SIGPIPEs on platforms that support
neither SO_NOSIGPIPE nor MSG_NOSIGNAL functionality.
* g-socthi-mingw.adb: Ditto.
(WS_Version): Use Windows 2.2.
Use Winsock 2.2 (instead of 1.1) for the GNAT.Socket API.
* g-soliop-mingw.ads: Link with ws2_32 for Windows 2.x support.
Use Winsock 2.2 (instead of 1.1) for the GNAT.Socket API.
* Makefile.in: New libgnat pair g-stsifd.adb<g-stsifd-sockets.adb.
added GNAT byte swapping facility
Update FreeBSD THREADSLIB from -lc_r to -lpthread, for FreeBSD 6.
* g-bytswa.adb, g-bytswa-x86.adb, g-bytswa.ads: New files.
* socket.c (__gnat_read_signalling_fd, __gnat_write_controlling_fd):
New subprograms.
(__gnat_create_signalling_fds): New subprogram.
Set the runtime process to ignore SIGPIPEs on platforms that support
neither SO_NOSIGPIPE nor MSG_NOSIGNAL functionality.
2007-04-06 Hristian Kirtchev <kirtchev@adacore.com>
Vincent Celier <celier@adacore.com>
* a-calend-vms.ads, a-calend.ads, a-calend.adb, a-calend-vms.adb:
New version of Ada.Calendar which supports the new upper bound of Ada
time (2399-12-31 86_399.999999999).
The following modifications have been made to the package:
- New representation of time as count of nanoseconds since the start of
Ada time (1901-1-1 0.0).
- Target independent Split and Time_Of routines which service both
Ada 95 and Ada 2005 code.
- Target independent interface to the Ada 2005 children of Calendar.
- Integrated leap seconds into Ada 95 and Ada 2005 mode.
- Handling of non-leap centenial years.
- Updated clock function.
- Updated arithmetic and comparison operators.
* a-caldel.adb (To_Duration): Add call to target independent routine in
Ada.Calendar to handle the conversion of time to duration.
* sysdep.c (__gnat_localtime_tzoff): Test timezone before setting off
(UTC Offset).
If timezone is obviously incorrect (outside of -14 hours .. 14 hours),
set off to 0.
(__gnat_localtime_tzoff for Lynx and VxWorks): Even though these
targets do not have a natural time zone, GMT is used as a default.
(__gnat_get_task_options): New.
* a-direct.adb (Modification_Time): Add with and use clauses for
Ada.Calendar and Ada.
Calendar.Formatting. Remove with clause for Ada.Unchecked_Conversion
since it is no longer needed.
(Duration_To_Time): Removed.
(OS_Time_To_Long_Integer): Removed.
(Modification_Time): Rewritten to use Ada.Calendar and Ada.Calendar.
Formatting Time_Of routines which automatically handle time zones,
buffer periods and leap seconds.
* a-calari.ads, a-calari.adb ("+", "-", Difference): Add calls to
target independent routines in Ada.Calendar.
* a-calfor.ads, a-calfor.adb:
Code cleanup and addition of validity checks in various routines.
(Day_Of_Week, Split, Time_Of): Add call to target independent routine in
Ada.Calendar.
* a-catizo.ads, a-catizo.adb (UTC_Time_Offset): Add call to target
independent routine in Ada.Calendar.
2007-04-06 Olivier Hainque <hainque@adacore.com>
* adaint.c:
(convert_addresses): Adjust prototype and dummy definition to expect an
extra file_name argument.
* gmem.c (__gnat_convert_addresses): Wrapper to convert_addresses,
filling the now expected file_name argument with the appropriate
argv[0] expansion.
(__gnat_gmem_a2l_initialize, __gnat_gmem_read_next_frame): Use it.
(tracebk): Array of void * instead of char *, corresponding to what
convert_addresses expects.
(exename): New static global, to hold the executable file name to be
used in all convert_addresses invocations.
(gmem_read_backtrace, __gnat_gmem_symbolic): Account for tracebk type
change.
(__gnat_gmem_a2l_initialize): Resolve exename.
(__gnat_convert_addresses): Use exename as the convert_addresses
file_name argument.
* g-trasym.adb (Symbolic_Traceback): Adjust signature of imported
"convert_addresses", now expecting a filename argument. Import the
necessary entities to compute the filename to use and pass it to
convert_addresses.
2007-04-06 Matt Gingell <gingell@adacore.com>
* system-aix.ads: Back out previous change.
(Functions_Return_By_DSP): Removed
2007-04-06 Pascal Obry <obry@adacore.com>
* s-osprim-mingw.adb (Timed_Delay): Use the right clock (standard one
or the monotonic used by Ada.Real_Time) to compute the sleep duration
on Windows.
2007-04-06 Jose Ruiz <ruiz@adacore.com>
* s-osinte-vxworks.ads, s-osinte-vxworks.adb (VX_FP_TASK): Remove this
function. Its value changes in different VxWorks versions, and it is
now handled by the function __gnat_get_task_options.
* s-taprop-vxworks.adb (Create_Task): Call the function
__gnat_get_task_options to get the required options for creating a task.
2007-04-06 Pascal Obry <obry@adacore.com>
Thomas Quinot <quinot@adacore.com>
* adaint.c: Replace all occurences of S2WS to S2WSU (Unicode) when
dealing with filename.
(__gnat_fopen): Call the proper macro (8bits or UTF8) to convert the
filename from a standard string to a wide-string depending on the
encoding value.
(__gnat_freopen): Idem.
(__gnat_current_time): New function (wrapper for time(3) standard C
function).
* g-os_lib.ads (Current_Time): New function. Returns the current
system time as an OS_Time value.
* s-osprim.ads (Clock): Add more precise definition of UNIX epoch.
(Monotonic_Clock): Same.
2007-04-06 Quentin Ochem <ochem@adacore.com>
* ali.ads, ali.adb (Get_Nat): Raise an exception if the file cursor is
not on a natural.
(Scan_ALI): Cancel the xref line if there has been a reading ALI error.
2007-04-06 Jose Ruiz <ruiz@adacore.com>
* a-retide.adb: Add elaboration code to ensure that the tasking run
time is initialized when using delay operations even when no task is
created.
2007-04-06 Javier Miranda <miranda@adacore.com>
* a-tags.ads, a-tags.adb (Object_Specific_Data): Remove
component Num_Prim_Ops.
(Set_Num_Prim_Ops): Removed.
Remove all the assertions because all the routines of this
package are inline always.
(Get_Offset_Index): Add support to primary dispatch tables.
Move the documentation about the dispatch table to a-tags.ads
(Set_External_Tag): Removed
(Inherit_TSD): Removed.
(Interface_Data_Element, Interfaces_Array, Interface_Data): Declarations
moved to a-tags.ads
(Displace, IW_Membership, Inherit_TSD, Interface_Ancestor_Tags,
Register_Interface_Tag, Set_Offset_To_Top): Update all the occurrences
of the TSD field "Table" because this field has been renamed to
"Ifaces_Table".
(Inherit_CPP_DT): Removed.
(K_Typeinfo, K_Offset_To_Top, K_Tagged_Kind, K_Signature,
Cstring, Tag_Table, Type_Specific_Data, Dispatch_Table): These
declarations have been moved to a-tags.ads
(Check_Size): Removed.
(Expanded_Name): Updated to get access to the new field of TSD
containing the address of the expanded name.
(Get_Access_Level/Set_Access_Level): Removed.
(Get_Predefined_Prim_Op_Address): Removed.
(Set_Predefined_Prim_Op_Address): Removed.
(Get_Prim_Op_Address/Set_Prim_Op_Address): Removed.
(Get_Remotely_Callable/Set_Remotely_Callable): Removed.
(Set_Expanded_Name): Removed.
(Inherit_DT): Removed.
(Inherit_CPP_DT): Removed.
(Set_RC_Offset): Removed.
(Set_TSD): Removed.
(Base_Address): New function that displaces "this" to point to the base
of the object (that is, to point to the primary tag of the object).
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* exp_ch3.ads, exp_ch3.adb (Analyze_N_Full_Type_Declaration): For an
anonymous access component, do not create a master_id if type already
has one, as may happen if the type is a subcomponent of a packed array
type.
(Build_Init_Procedure, Component_Needs_Simple_Initialization,
Initialize_Tag): Remove code associated with the old CPP pragmas.
CPP_Virtual and CPP_Vtable are no longer supported.
(Build_Offset_To_Top_Internal): Add support for concurrent record types
(Build_Offset_To_Top_Functions): Add support for concurrent record types
(Freeze_Record_Type): Remove call to
Init_Predefined_Interface_Primitives.
(Init_Secondary_Tags.Initialize_Tag): New subprogram containing all the
code required to initialize the tags of the secondary dispatch tables.
This leaves the algoritm more clear.
(Init_Secondary_Tags): Add support for concurrent record types
(Make_Predefined_Primitive_Specs): Code cleanup.
(Predefined_Primitive_Bodies): Code cleanup.
(Build_Master_Renaming): New local subprogram.
(Expand_N_Full_Type_Declaration): Build the master_id associated with
anonymous access to task type components.
(Expand_N_Subtype_Indication): The bounds of a range constraint in a
subtype indication are resolved during analysis, and must not be done
here.
(Stream_Operation_OK): Check Restriction_Active before RTE_Available.
2007-04-06 Geert Bosch <bosch@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
Bob Duff <duff@adacore.com>
* exp_ch4.adb (Expand_N_Type_Conversion): Remove special processing
for conversion of a Float_Type'Truncation to integer.
* exp_attr.adb (Is_Inline_Floating_Point_Attribute): New function to
check if a node is an attribute that can be handled directly by the
back end.
(Expand_N_Attribute_Reference): Suppress expansion of floating-point
attributes that can be handled directly by the back end.
(Expand_N_Attribute_Reference, case 'Access and 'Unchecked_Access):
use new predicate Is_Access_Protected_Subprogram_Type.
(Expand_N_Attribute_Reference, case 'Write): The reference is legal for
and Unchecked_Union if it is generated as part of the default Output
procedure for a type with default discriminants.
(Expand_N_Attribute_Reference): Avoid the expansion of dispatching calls
if we are compiling under restriction No_Dispatching_Calls.
(Constrained): Use Underlying_Type, in case the type is private without
discriminants, but the full type has discriminants.
(Expand_N_Attribute_Reference): Replace call to Get_Access_Level by
call to Build_Get_Access_Level.
(Expand_N_Attribute_Reference): The use of 'Address with class-wide
interface objects requires a call to the run-time subprogram that
returns the base address of the object.
(Valid_Conversion): Improve error message on illegal attempt to store
an anonymous access to subprogram value into a record component.
* sem_res.adb (Resolve_Equality_Op): Detect ambiguity for "X'Access =
null".
(Simplify_Type_Conversion): New procedure that performs simplification
of Int_Type (Float_Type'Truncation (X)).
(Resolve_Type_Conversion): Call above procedure after resolving operand
and before performing checks. This replaces the existing ineffective
code in Exp_Ch4.
(Set_String_Literal_Subtype): When creating the internal static lower
bound subtype for a string literal, use a newly created copy of the
subtree representing the lower bound.
(Resolve_Call): Exclude build-in-place function calls from transient
scope treatment. Update comments to describe this exception.
(Resolve_Equality_Op): In case of dispatching call check violation of
restriction No_Dispatching_Calls.
(Resolve_Call): If the call returns an array, the context imposes the
component type of the array, and the function has one non-defaulted
parameter, rewrite the call as the indexing of a call with a single
parameter, to handle an Ada 2005 syntactic ambiguity for calls written
in prefix form.
(Resolve_Actuals): If an actual is an allocator for an access parameter,
the master of the created object is the innermost enclosing statement.
(Remove_Conversions): For a binary operator, check if type of second
formal is numeric, to check if an abstract interpretation is present
in the case of exponentiation as well.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Bob Duff <duff@adacore.com>
* atree.h, atree.ads, atree.adb (Copy_Node_With_Replacement): When
copying a parameter list in a call, set properly the First_Named_Formal
and Next_Named_Formal fields in the new list and in the enclosing call.
(Watch_Node,New_Node_Breakpoint,New_Node_Debugging_Output): Shorten
names, to ease typing in the debugger. Improve comments.
(Watch_Node): New variable, intended to be set in the debugger.
(New_Node_Breakpoint): New do-nothing procedure to set a breakpoint on,
called when the watched node is created.
(New_Node_Debugging_Output): Combined version of local procedures
New_Node_Debugging_Output and New_Entity_Debugging_Output, now global,
with a parameter so that conditional breakpoints like "if Node = 12345"
work.
(New_Node, New_Entity): Call the global New_Node_Debugging_Output.
Add Elist1 function
2007-04-06 Thomas Quinot <quinot@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* checks.ads, checks.adb (Selected_Range_Checks): No range check is
required for a conversion between two access-to-unconstrained-array
types.
(Expr_Known_Valid): Validity checks do not apply to discriminants, but
to discriminant constraints on discriminant objects. This rule must
apply as well to discriminants of protected types in private components.
(Null_Exclusion_Static_Checks): If No_Initialization is set on an
object of a null-excluding access type then don't require the
the object declaration to have an expression and don't emit a
run-time check.
2007-04-06 Arnaud Charlet <charlet@adacore.com>
Eric Botcazou <botcazou@adacore.com>
* gnatvsn.ads, comperr.adb (Get_Gnat_build_Type): Renamed Build_Type
and made constant.
* comperr.ads, comperr.adb (Compiler_Abort): Add third parameter
Fallback_Loc. Use it as the sloc info when Current_Error_Node doesn't
carry any.
* fe.h (Compiler_Abort): Add third parameter.
* misc.c (internal_error_function): Build third argument from current
input location and pass it to Compiler_Abort.
2007-04-06 Gary Dismukes <dismukes@adacore.com>
* cstand.adb (Create_Standard): When the target's storage unit size is
greater than a byte, set Has_Non_Standard_Rep and Has_Pragma_Pack on
Standard_String.
2007-04-06 Nicolas Roche <roche@adacore.com>
* cstreams.c (__gnat_full_name): Fix issues on VxWorks 6.x for which
absolute path can have the following form: device:/a/b. In this case
'/' should be inserted between the path and the filename.
2007-04-06 Olivier Hainque <hainque@adacore.com>
Eric Botcazou <botcazou@adacore.com>
* decl.c (gnat_to_gnu_entity) <E_Constant>: Associate an external
VAR_DECL to a CONST_DECL we make for a public constant when we know the
corresponding definition has created the so made visible variable.
Handle anonymous access to protected subprogram.
(gnat_to_gnu_entity) <E_Variable>: Do not make the underlying type of an
object with an address clause volatile. Re-enable original fix.
<E_Subprogram_Type>: Set TYPE_REF_CAN_ALIAS_ALL on the reference type
too.
(gnat_to_gnu_entity) <E_Class_Wide_Type>: Retrieve the TYPE_DECL
associated with either the Equivalent or Root type, instead of the
naked type node.
(gnat_to_gnu_entity): Manually mark the top of the DECL_FIELD_OFFSET
subtree for every field of a global record type.
(gnat_to_gnu_entity) <E_Record_Subtype>: If the subtype has
discriminants, invoke again variable_size on its newly computed sizes.
2007-04-06 Robert Dewar <dewar@adacore.com>
Thomas Quinot <quinot@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Bob Duff <duff@adacore.com>
* einfo.ads, einfo.adb: (First_Component_Or_Discriminant): New function
(Next_Component_Or_Discriminant): New function and procedure
(First_Index, First_Literal, Master_Id,
Set_First_Index, Set_First_Literal, Set_Master_Id):
Add missing Ekind assertions.
(Is_Access_Protected_Subprogram_Type): New predicate.
(Has_RACW): New entity flag, set on package entities to indicate that
the package contains the declaration of a remote accecss-to-classwide
type.
(E_Return_Statement): This node type has the Finalization_Chain_Entity
attribute, in case the result type has controlled parts.
(Requires_Overriding): Add this new flag, because "requires
overriding" is subtly different from "is abstract" (see AI-228).
(Is_Abstract): Split Is_Abstract flag into Is_Abstract_Subprogram and
Is_Abstract_Type. Make sure these are called only when appropriate.
(Has_Pragma_Unreferenced_Objects): New flag
* exp_ch5.adb (Expand_N_Assignment_Statement): If the left-hand side is
class-wide, the tag of the right-hand side must be an exact match, not
an ancestor of that of the object on left-hand side.
(Move_Activation_Chain): New procedure to create the call to
System.Tasking.Stages.Move_Activation_Chain.
(Expand_N_Extended_Return_Statement): Generate code to call
System.Finalization_Implementation.Move_Final_List at the end of a
return statement if the function's result type has controlled parts.
Move asserts to Build_In_Place_Formal.
(Move_Final_List): New function to create the call statement.
(Expand_N_Assignment_Statement): In case of assignment to a class-wide
tagged type, replace generation of call to the run-time subprogram
CW_Membership by call to Build_CW_Membership.
(Expand_N_Return_Statement): Replace generation of call to the run-time
subprogram Get_Access_Level by call to Build_Get_Access_Level.
(Expand_N_Simple_Function_Return): Replace generation of call to the
run-time subprogram Get_Access_Level by call to Build_Get_Access_Level.
* exp_ch6.ads, exp_ch6.adb (Expand_Call): Use new predicate
Is_Access_Protected_Subprogram_Type, to handle both named and anonymous
access to protected operations.
(Add_Task_Actuals_To_Build_In_Place_Call): New procedure to add the
master and chain actual parameters to a build-in-place function call
involving tasks.
(BIP_Formal_Suffix): Add new enumeration literals to complete the case
statement.
(Make_Build_In_Place_Call_In_Allocator,
Make_Build_In_Place_Call_In_Anonymous_Context,
Make_Build_In_Place_Call_In_Assignment,
Make_Build_In_Place_Call_In_Object_Declaration): Call
Add_Task_Actuals_To_Build_In_Place_Call with the appropriate master.
(Expand_Inlined_Call): If the subprogram is a null procedure, or a
stubbed procedure with a null body, replace the call with a null
statement without using the full inlining machinery, for efficiency
and to avoid invalid values in source file table entries.
* exp_ch8.adb (Expand_N_Object_Renaming_Declaration): Add support for
renamings of calls to build-in-place functions.
* rtsfind.adb (RTE_Record_Component_Available): New subprogram that
provides the functionality of RTE_Available to record components.
(RTU_Entity): The function Entity has been renamed to RTU_Entity
to avoid undesired overloading.
(Entity): New subprogram that returns the entity for the referened
unit. If this unit has not been loaded, it returns Empty.
(RE_Activation_Chain_Access, RE_Move_Activation_Chain): New entities.
Remove no longer used entities.
(RE_Finalizable_Ptr_Ptr, RE_Move_Final_List): New entities.
(RE_Type_Specific_Data): New entity.
(RE_Move_Any_Value): New entity.
(RE_TA_A, RE_Get_Any_Type): New entities.
(RE_Access_Level, RE_Dispatch_Table, E_Default_Prim_Op_Count,
RE_Prims_Ptr, RE_RC_Offset, RE_Remotely_Callable,
RE_DT_Typeinfo_Ptr_Size, RE_Cstring_Ptr, RE_DT_Expanded_Name): Added.
(Entity): New subprogram that returns the entity for the referened
unit. If this unit has not been loaded, it returns Empty.
(RTE): Addition of a new formal that extends the search to the scopes
of the record types found in the chain of the package.
* sem_ch6.ads, sem_ch6.adb (Check_Overriding_Indicator): Print
"abstract subprograms must be visible" message, whether or not the type
is an interface; that is, remove the special case for interface types.
(Analyze_Function_Return): Remove error message "return of task objects
is not yet implemented" because this is now implemented.
(Create_Extra_Formals): Add the extra master and activation chain
formals in case the result type has tasks.
Remove error message "return of limited controlled objects is not yet
implemented".
(Create_Extra_Formals): Add the extra caller's finalization list formal
in case the result type has controlled parts.
(Process_Formals): In case of access formal types there is no need
to continue with the analysis of the formals if we already notified
errors.
(Check_Overriding_Indicator): Add code to check overriding of predefined
operators.
(Create_Extra_Formals): Prevent creation of useless Extra_Constrained
flags for formals that do not require them,.
(Enter_Overloaded_Entity): Do not give -gnatwh warning message unless
hidden entity is use visible or directly visible.
(Analyze_Abstract_Subprogram_Declaration,Analyze_Subprogram_Body,
Analyze_Subprogram_Declaration,Analyze_Subprogram_Specification,
Check_Conventions,Check_Delayed_Subprogram,Make_Inequality_Operator,
New_Overloaded_Entity): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type.
* s-finimp.ads, s-finimp.adb (Move_Final_List): New procedure to move
a return statement's finalization list to the caller's list, used for
build-in-place functions with result type with controlled parts.
Remove no longer used entities.
* s-taskin.ads (Activation_Chain): Remove pragma Volatile. It is no
longer needed, because the full type is now limited, and therefore a
pass-by-reference type.
(Foreign_Task_Level): New constant.
* s-tassta.ads, s-tassta.adb (Move_Activation_Chain): New procedure to
move tasks from the activation chain belonging to a return statement to
the one passed in by the caller, and update the master to the one
passed in by the caller.
(Vulnerable_Complete_Master, Check_Unactivated_Tasks): Check the master
of unactivated tasks, so we don't kill the ones that are being returned
by a build-in-place function.
(Create_Task): Ignore AI-280 for foreign threads.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
Bob Duff <duff@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* errout.adb (Unwind_Internal_Type): Use predicate
Is_Access__Protected_Subprogram_Type.
* freeze.adb (Size_Known): Use First/Next_Component_Or_Discriminant
(Freeze_Entity, packed array case): Do not override explicitly set
alignment and size clauses.
(Freeze_Entity): An entity declared in an outer scope can be frozen if
the enclosing subprogram is a child unit body that acts as a spec.
(Freeze_Entity): Use new predicate Is_Access_Protected_Subprogram_Type.
(Freeze_Record_Type): New Ada 2005 processing for reverse bit order
Remove all code for DSP option
* layout.adb (Layout_Record_Type): Use First/
Next_Component_Or_Discriminant
(Layout_Type): Use new predicate Is_Access_Protected_Subprogram_Type,
to handle properly the anonymous access case.
* sem_attr.adb (Build_Access_Object_Type): Use E_Access_Attribute_Type
for all access attributes, because overload resolution should work the
same for 'Access, 'Unchecked_Access, and 'Unrestricted_Access. This
causes the error message for the ambiguous "X'Access = Y'Access" and
"X'Unrestricted_Access = Y'Access" and so forth to match.
(Resolve_Attribute, case 'Access): Remove use of Original_Access_Type,
now that anonymous access to protected operations have their own kind.
(Resolve_Attribute): In case of dispatching call check the violation of
restriction No_Dispatching_Calls.
(Check_Array_Type): Check new -gnatyA array index style option
* sem_ch3.ads, sem_ch3.adb (Derived_Type_Declaration): Reject an
attempt to derive from a synchronized tagged type.
(Analyze_Type_Declaration): If there is a incomplete tagged view of the
type, inherit the class-wide type already created, because it may
already have been used in a self-referential anonymous access component.
(Mentions_T): Recognize self-referential anonymous access components
that use (a subtype of) the class-wide type of the enclosing type.
(Build_Derived_Record_Type): Add earlier setting of Is_Tagged_Type. Pass
Derived_Type for Prev formal on call to
Check_Anonymous_Access_Components rather than Empty.
(Make_Incomplete_Type_Declaration): Add test for case where the type has
a record extension in deciding whether to create a class-wide type,
rather than just checking Tagged_Present.
(Replace_Anonymous_Access_To_Protected_Subprogram): Procedure applies
to stand-alone object declarations as well as component declarations.
(Array_Type_Declaration): Initialize Packed_Array_Type to Empty, to
prevent accidental overwriting when enclosing package appears in
a limited_with_clause.
(Array_Type_Declaration): If the component type is an anonymous access,
the associated_node for the itype is the type declaration itself.
(Add_Interface_Tag_Components): Modified to support concurrent
types with abstract interfaces.
(Check_Abstract_Interfaces): New subprogram that verifies the ARM
rules 3.9.4 (15/2), 9.1 (9.d/2) and 9.4 (11.d/2).
(Build_Derived_Record_Type): Add call to Analyze_Interface_Declaration
to complete the decoration of synchronized interface types. Add also
a call to Check_Abstract_Interfaces to verify the ARM rules.
(Derive_Interface_Subprograms): Modified to support concurrent types
with abstract interfaces.
(Analyze_Subtype_Indication): Resolve the range with the given subtype
mark, rather than delaying the full resolution depending on context.
(Analyze_Component_Declaration,Analyze_Interface_Declaration,
Analyze_Object_Declaration,Analyze_Subtype_Declaration,
Array_Type_Declaration,Build_Derived_Record_Type,
Build_Discriminated_Subtype,Check_Abstract_Overriding,Check_Completion,
Derive_Interface_Subprograms,Derive_Subprogram,Make_Class_Wide_Type,
Process_Full_View,Record_Type_Declaration): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type. Make sure these are
called only when appropriate.
(Copy_And_Swap): Copy Has_Unreferenced_Objects flag from full type
to private type.
(Analyze_Subtype_Declaration): For an access subtype declaration, create
an itype reference for the anonymous designated subtype, to prevent
scope anonmalies in gigi.
(Build_Itype_Reference): New utility, to simplify construction of such
references.
2007-04-06 Vincent Celier <celier@adacore.com>
* errutil.adb (Initialize): Initialize warnings table, if all warnings
are suppressed, supply an initial dummy entry covering all possible
source locations.
* make.adb (Scan_Make_Arg): Reject options that should start with "--"
and start with only one, such as "-RTS=none".
(Collect_Arguments): Do not check for sources outside of projects.
Do not collect arguments if project is externally built.
(Compile_Sources): Do nothing, not even check if the source is up to
date, if its project is externally built.
(Compile): When compiling a predefined source, add -gnatpg
as the second switch, after -c.
(Compile_Sources): Allow compilation of Annex J renames without -a
(Is_In_Object_Directory): Check if the ALI file is in the object
even if there is no project extension.
(Create_Binder_Mapping_File): Only put a unit in the mapping file for
gnatbind if the ALI file effectively exists.
(Initialize): Add the directory where gnatmake is invoked in front of
the path if it is invoked from a bin directory, even without directory
information, so that the correct GNAT tools will be used when spawned
without directory information.
* makeusg.adb: Change switch -S to -eS
Add lines for new switches -we, -wn and -ws
Add line for new switch -p
* prj-proc.adb (Process): Set Success to False when Warning_Mode is
Treat_As_Error and there are warnings.
* switch-m.ads, switch-m.adb (Normalize_Compiler_Switches): Do not skip
-gnatww Change gnatmake switch -S to -eS
(Scan_Make_Switches): Code reorganisation. Process separately multi
character switches and single character switches.
(Scan_Make_Switches): New Boolean out parameter Success. Set Success to
False when switch is not recognized by gnatmake.
(Scan_Make_Switches): Set Setup_Projects True when -p or
--create-missing-dirs is specified.
* fname.adb (Is_Predefined_File_Name): Return True for annex J
renamings Calendar, Machine_Code, Unchecked_Conversion and
Unchecked_Deallocation only when Renamings_Included is True.
* par.adb: Allow library units Calendar, Machine_Code,
Unchecked_Conversion and Unchecked_Deallocation to be recompiled even
when -gnatg is not specified.
(P_Interface_Type_Definition): Remove the formal Is_Synchronized because
there is no need to generate always a record_definition_node in case
of synchronized interface types.
(SIS_Entry_Active): Initialize global variable to False
(P_Null_Exclusion): For AI-447: Add parameter Allow_Anonymous_In_95 to
indicate cases where AI-447 says "not null" is legal.
* makeutl.ads, makeutil.adb (Executable_Prefix_Path): New function
* makegpr.adb (Check_Compilation_Needed): Take into account dependency
files with with several lines starting with the object fileb name.
(Scan_Arg): Set Setup_Projects True when -p or --create-missing-dirs
is specified.
(Initialize): Add the directory where gprmake is invoked in front of the
path, if it is invoked from a bin directory or with directory
information, so that the correct GNAT tools will be used when invoked
directly.
(Check_Compilation_Needed): Process correctly backslashes on Windows.
* vms_data.ads: Update switches/qualifiers
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Thomas Quinot <quinot@adacore.com>
* exp_aggr.adb:
If the array component is a discriminated record, the array aggregate
is non-static even if the component is given by an aggregate with
static components.
(Expand_Record_Aggregate): Use First/Next_Component_Or_Discriminant
(Convert_Aggr_In_Allocator): If the allocator is for an access
discriminant and the type is controlled. do not place on a finalization
list at this point. The proper list will be determined from the
enclosing object.
(Build_Record_Aggr_Code): If aggregate has box-initialized components,
initialize record controller if needed, before the components, to ensure
that they are properly finalized.
(Build_Record_Aggr_Code): For the case of an array component that has a
corresponding array aggregate in the record aggregate, perform sliding
if required.
2007-04-06 Javier Miranda <miranda@adacore.com>
Gary Dismukes <dismukes@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_ch13.adb (Expand_External_Tag_Definition): Replace call to the
run-time subprogram Set_External_Tag by call to Build_Set_External_Tag.
* exp_ch4.adb (Expand_Allocator_Expression): Don't perform a run-time
accessibility on class-wide allocators if the allocator occurs at the
same scope level as the allocator's type. The check is guaranteed to
succeed in that case, even when the expression originates from a
parameter of the containing subprogram.
(Expand_N_Op_Eq): Do nothing in case of dispatching call if compiling
under No_Dispatching_Calls restriction. During the semantic analysis
we already notified such violation.
(Tagged_Membership): Constant folding. There is no need to check
the tag at run-time if the type of the right operand is non
class-wide abstract.
Replace call to Is_Ancestor by call to Is_Parent
to support concurrent types with interface types.
(Expand_N_Allocator): Add an assertion associated with the generation
of the master_id.
(Expand_N_Slice): Do not enable range check to nodes associated
with the frontend expansion of the dispatch table.
(Is_Local_Access_Discriminant): Subsidiary function to
Expand_N_Allocator.
(Tagged_Membership): Replace generation of call to the run-time
subprogram CW_Membership by call to Build_CW_Membership.
(Expand_Allocator_Expression): Replace generation of call to the
run-time subprogram Get_Access_Level by call to Build_Get_Access_Level.
* exp_disp.ads, exp_disp.adb (Make_DT): Code reorganization to
initialize most the TSD components by means of an aggregate.
Modify the declaration of the object containing the TSD
because we now expand code that has a higher level of abstraction.
The TSD has a discriminant containing the Inheritance Depth Level,
value that is used in the membership test but also to fix the size
of the table of ancestors.
(Expand_Interface_Conversion): Insert function body at the closest place
to the conversion expression, to prevent access-before-elaboration
errors in the backend.
Code improved to reduce the size of the dispatch table if
compiling under restriction No_Dispatching_Calls plus code cleanup.
Code reorganization plus removal of calls to Set_Num_Prim_Ops
(Make_Secondary_DT): Remove call to Set_Num_Prim_Ops.
(Expand_Dispatching_Call): Minor code reorganization plus addition of
code to return immediately if compiling under No_Dispatching_Calls
restriction.
(Set_All_DT_Position): Remove code associated with the old CPP pragmas.
CPP_Virtual and CPP_Vtable are no longer supported.
(Expand_Interface_Conversion): Add missing support for interface type
derivations.
(Expand_Interface_Actuals): Replace calls to Is_Ancestor by calls to
Is_Parent to support concurrent types with interfaces.
(Init_Predefined_Interface_Primitives): Removed.
(Make_Secondary_DT): Modified to support concurrent record types.
(Set_All_DT_Position): Modified to support concurrent record types.
(Ada_Actions, Action_Is_Proc, Action_Nb_Arg): Remove entries associated
with Get_External_Tag, Inherit_TSD, Set_External_Tag.
(Ada_Actions, Action_Is_Proc, Action_Nb_Arg): Remove entry associated
with CW_Membership.
(Ada_Actions, Action_Is_Proc, Action_Nb_Arg): Remove entries associated
with Get_Access_Level, Get_Predefined_Prim_Op_Address,
Get_Prim_Op_Address Get_RC_Offset, Get_Remotely_Callable, Inherit_DT,
Set_Access_Level, Set_Expanded_Name, Set_Predefined_Prim_Op_Address,
Set_Prim_Op_Address, Set_RC_Offset, Set_Remotely_Callable, Set_TSD.
(Expand_Dispatching_Call): Replace generation of call to the run-time
subprograms Get_Predefined_Prim_Op_Address and Get_Prim_Op_Address by
calls to Build_Get_Predefined_Prim_Op_Address, and Build_Get_Prim_Op_
Address.
(Fill_DT_Entry, Fill_Secondary_DT_Entry): Replace generation of call to
the run-time subprograms Set_Predefined_Prim_Op_Address and Set_Prim_
Op_Address by calls to Build_Set_Predefined_Prim_Op_Address, and
Build_Set_Prim_Op_Address.
(Get_Remotely_Callable): Subprogram removed.
(Init_Predefined_Interface_Primitives): Replace generation of call to
the run-time subprograms Inherit_DT by call to Build_Inherit_Predefined_
Prims.
* sem_elab.adb (Set_Elaboration_Constraint): Replace the call to
First (Parameter_Associations ()) with the call to First_Actual that
returns an actual parameter expression for both named and positional
associations.
* sem_disp.adb (Check_Dispatching_Call): In case of dispatching call
check violation of restriction No_Dispatching_Calls.
(Check_Controlling_Type): A formal of a tagged incomplete type is a
controlling argument.
* exp_util.ads, exp_util.adb (Type_May_Have_Bit_Aligned_Components): Use
First/Next_Component_Or_Discriminant
(Insert_Actions): Add entries for new N_Push and N_Pop nodes
(Find_Implemented_Interface): Removed. All the calls to this subprogram
specify Any_Limited_Interface, and this functionality is already
provided by the function Has_Abstract_Interfaces.
(Find_Interface, Find_Interface_Tag, Find_Interface_ADT): Modified to
support concurrent types implementing interfaces.
(Find_Implemented_Interface): Removed. All the calls to this subprogram
specify kind Any_Limited_Interface, and this functionality is already
provided by the function Has_Abstract_Interfaces.
(Remove_Side_Effects): replace Controlled_Type by
CW_Or_Controlled_Type whenever the issue is related to
using or not the secondary stack.
* par-ch12.adb (P_Formal_Type_Definition): Update calls to
P_Interface_Type_Definition to fulfill the new interface (the formal
Is_Synchronized is no longer required).
* Make-lang.in (GNAT_ADA_OBJS): Addition of exp_atag.o
Update dependencies.
* exp_atag.ads, exp_atag.adb: New file
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Bob Duff <duff@adacore.com>
Cyrille Comar <comar@adacore.com>
* exp_ch7.ads, exp_ch7.adb (Find_Final_List): If the access type is
anonymous, use finalization list of enclosing dynamic scope.
(Expand_N_Package_Declaration): For a library package declaration
without a corresponding body, generate RACW subprogram bodies in the
spec (just as we do for the task activation call).
(Convert_View): Split Is_Abstract flag into Is_Abstract_Subprogram and
Is_Abstract_Type. Make sure these are called only when appropriate.
Remove all code for DSP option
(CW_Or_Controlled_Type): new subprogram.
2007-04-06 Eric Botcazou <botcazou@adacore.com>
Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* exp_ch9.ads, exp_ch9.adb (Family_Offset): Add new 'Cap' boolean
parameter. If it is set to true, return a result capped according to
the global upper bound for the index of an entry family.
(Family_Size): Add new 'Cap' boolean parameter. Pass it to Family_Offset
(Build_Find_Body_Index): Adjust for above change.
(Entry_Index_Expression): Likewise.
(Is_Potentially_Large_Family): New function extracted from...
(Collect_Entry_Families): ...here. Call it to detect whether the family
is potentially large.
(Build_Entry_Count_Expression): If the family is potentially large, call
Family_Size with 'Cap' set to true.
(Expand_N_Protected_Type_Declaration, Expand_N_Protected_Body): Generate
a protected version of an operation declared in the private part of
a protected object, because they may be invoked through a callback.
(Set_Privals): If the type of a private component is an anonymous access
type, do not create a new itype for each protected body.
If the body of a protected operation creates
controlled types (including allocators for class-widetypes), the
body of the corresponding protected subprogram must include a
finalization list.
(Build_Activation_Chain_Entity): Build the chain entity for extended
return statements.
(Type_Conformant_Parameters): Use common predicate Conforming_Types
to determine whether operation overrides an inherited primitive.
(Build_Wrapper_Spec): Add code to examine the parents while looking
for a possible overriding candidate.
(Build_Simple_Entry_Call): Set No_Initialization on the object used to
hold an actual parameter value since its initialization is separated
from the the declaration. Prevents errors on null-excluding access
formals.
2007-04-06 Thomas Quinot <quinot@adacore.com>
Pablo Oliveira <oliveira@adacore.com>
* exp_dist.ads, exp_dist.adb (Build_To_Any_Call, Build_From_Any_Call):
Do an Unchecked_Conversion to handle the passage from the Underlying
Type to the Base Type when calling Build_To_Any_Call and
Build_From_Any_Call.
(Build_Actual_Object_Declaration): Set Object's Ekind to E_Variable or
E_Constant, depending upon Variable formal.
(GARLIC_Support.Build_Subprogram_Receiving_Stubs,
PolyORB_Support.Build_Subprogram_Receiving_Stubs): For a formal
parameter that requires an extra constrained parameter, declare
temporary for actual as a variable, not a constant.
(Add_RACW_Primitive_Declarations_And_Bodies): Generate bodies only when
the unit being compiled is the one that contains the stub type.
Change primitive operation name for the RACW associated with a RAS
from Call to _Call so it cannot clash with any legal identifier.
(PolyORB_Support.Add_RACW_Write_Attribute): Remove unused constant
Is_RAS.
(Append_RACW_Bodies): New subprogram.
(Expand_Receiving_Stubs_Bodies): Pass a 'Stmts' list to
Add_Receiving_Stubs_To_Declarations functions.
When expanding a package body, this list correspond to the
statements in the HSS at the end of the pacakge.
When expanding a package spec, this list correspond to the
spec declarations.
(Add_Receiving_Stubs_To_Declarations): Append the function
registering the receiving stubs at the end of the 'Stmts' list.
(RCI_Package_Locator): Pass the new Version generic formal when
instantiating a RCI_Locator package.
(Build_From_Any_Function): To compute the High bound for an
unconstrained array actual, we add the Low bound with the length.
Thus we must convert the low bound and the length to an appropriate
type before doing the sum.
(Build_Subprogram_Receiving_Stubs, PolyORB):
* Retrieve the extra formals parameters at the
end of the parameter stream.
* Use Move_Any_Value to write back out parameters
after executing the request as it is more efficient
than Copy_Any_Value.
* Build the any containing Extra Formals with the
appropriate typecode.
(PolyORB_Support.Helpers.Append_Record_Traversal): Nothing to do for an
empty Component_List.
(Build_Actual_Object_Declaration): New subprogram. Build and insert into
the tree the declaration for an object that serves as actual parameter
in server-side stubs.
(GARLIC_Support.Build_Subprogram_Receiving_Stubs,
PolyORB_Support.Build_Subprogram_Receiving_Stubs):
Use Build_Actual_Object_Declaration to prepare the actuals.
(Add_Parameter_To_NVList): Set the parameter mode to In for
Extra Constrained Parameters.
(Build_General_Calling_Stubs): Set the parameter type to boolean for
Extra Constrained parameters.
(Build_To_Any_Function, Build_From_Any_Function,
Built_TypeCode_Function): When Typ is implicit, call the correct
function with the first not implicit parent type.
(TC_Rec_Add_Process_Element, FA_Rec_Add_Process_Element,
(FA_Ary_Add_Process_Element): When Datum is an Any, we cannot infer the
typecode from the Etype. Therefore we retrieve the correct typecode
with a call to Get_Any_Type.
(Copy_Specification): Do controlling formal type substitution based on
Is_Controlling_Formal flag, instead of caller-provided object type.
(Build_Subprogram_Calling_Stubs): When retrieveing the original spec for
a RACW primitive operation, we might get a subprogram declaration for an
ancestor of the RACW designated type (not for the designated type
itself), in the case where this operation is inherited. In this case we
have no easy means of determining the original tagged type for which
the primitive was declared, so instead we now rely on
Copy_Specification to use the Is_Controlling_Formal flag to determine
which formals require type substitution.
2007-04-06 Robert Dewar <dewar@adacore.com>
Ed Schonberg <schonberg@adacore.com>
* exp_intr.adb (Expand_Exception_Call): Calls to subprograms in
GNAT.Current_Exception are not allowed if pragma Restrictions
(No_Exception_Propagation) is set and in any case make the associated
handler unsuitable as a target for a local raise statement.
(Expand_Dispatching_Constructor_Call): Replace generation of call to the
run-time subprogram CW_Membership by call to Build_CW_Membership.
(Expand_Dispatching_Constructor_Call): If the dispatching tag is given
by a function call, a temporary must be created before expanding the
Constructor_Call itself, to prevent out-of-order elaboration in the
back-end when stack checking is enabled..
2007-04-06 Ed Schonberg <schonberg@adacore.com>
* exp_pakd.adb (Expand_Packed_Boolean_Operator): The bounds of the
result are the bounds of the left operand, not the right.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
* exp_strm.adb
(Build_Mutable_Record_Write_Procedure): For an Unchecked_Union type, use
discriminant defaults.
(Build_Record_Or_Elementary_Output_Procedure): Ditto.
(Make_Component_List_Attributes): Ditto.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Bob Duff <duff@adacore.com>
* sem_aggr.adb (Resolve_Record_Aggregate): In semantics-only mode treat
an association with a box as providing a value even though the
initialization procedure for the type is not available.
(Resolve_Record_Aggregate): Check that a choice of an association with a
box corresponds to a component of the type.
(Resolve_Record_Aggregate): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type.
* exp_tss.adb (Base_Init_Proc): Use Is_Type instead of Type_Kind for
assert.
* inline.adb (Add_Inlined_Body): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type. Make sure these are
called only when appropriate.
2007-04-06 Olivier Hainque <hainque@adacore.com>
* g-alleve.ads (Low Level Vector type definitions): Map each to the
associated vector view instead of all to the unsigned char view.
* g-altcon.adb (Generic_Conversions): New internal generic package,
offering facilities for all the Vector/View conversion routines
implemented by this unit.
(To_View/To_Vector - all versions): Reimplemented in a systematic
manner, using the internal Generic_Conversions facilities.
2007-04-06 Pascal Obry <obry@adacore.com>
* g-arrspl.adb (Free) [Element_Access]: New routine to free the source
string.
(Create): Free the source string before storing the new one.
2007-04-06 Vincent Celier <celier@adacore.com>
* g-debpoo.adb (Validity): New package with a complete new
implementation of subprograms Is_Valid and Set_Valid.
(Is_Valid): Move to local package Validity
(Set_Valid): Move to local package Validity
2007-04-06 Arnaud Charlet <charlet@adacore.com>
Pablo Oliveira <oliveira@adacore.com>
* g-expect.adb (Get_Command_Output): When expanding the output buffer
we must ensure that there is enough place for the new data we are going
to copy in.
2007-04-06 Thomas Quinot <quinot@adacore.com>
* g-md5.ads, g-md5.adb (Digest): Fix off-by-one error in padding
computation.
2007-04-06 Jose Ruiz <ruiz@adacore.com>
Vincent Celier <celier@adacore.com>
* gnatcmd.adb (B_Start): Add prefix of binder generated file.
(Stack_String): Add this String that contains the name of the Stack
package in the project file.
(Packages_To_Check_By_Stack): Add this list that contains the packages
to be checked by gnatstack, which are the naming and the stack packages.
(Check_Files): If no .ci files were specified for gnatstack we add all
the .ci files belonging to the projects, including binder generated
files.
(Non_VMS_Usage): Document that gnatstack accept project file switches.
(GNATCmd): Update the B_Start variable if we are in a VMS environment.
Add gnatstack to the list of commands that use project file related
switches, and get the single attribute Switches from the stack package
in a project file when calling gnatstack. Parse the -U flag for
processing files belonging to all projects in the project tree.
Remove all processing for command Setup
* prj-attr.adb: Add new package Stack with single attribute Switches
* vms_conv.ads (Command_Type): Add command Stack.
Move to body declarations that are only used in the body: types Item_Id,
Translation_Type, Item_Ptr, Item and its subtypes.
* vms_conv.adb: (Initialize): Add data for new command Stack.
Add declarations moved from the spec: types Item_Id, Translation_Type,
Item_Ptr, Item and its subtypes.
(Cargs_Buffer): New table
(Cargs): New Boolean global variable
(Process_Buffer): New procedure to create arguments
(Place): Put character in table Buffer or Cargs_Buffer depending on the
value of Cargs.
(Process_Argument): Set Cargs when processing qualifiers for GNAT
COMPILE
(VMS_Conversion): Call Process_Buffer for table Buffer and, if it is not
empty, for table Cargs_Buffer.
(Initialize): Remove component Setup in Command_List
2007-04-06 Vincent Celier <celier@adacore.com>
* gprep.adb (Process_Files.Process_One_File): Use full file name when
issuing pragma Source_Reference.
2007-04-06 Emmanuel Briot <briot@adacore.com>
* g-regpat.adb (Parse_Posix_Character_Class): Fix handling of
[[:xdigit:]] character class.
Also raise an exception when an invalid character class is used.
2007-04-06 Pascal Obry <obry@adacore.com>
* i-cstrea.ads: (fopen): Add encoding parameter.
(freopen): Idem.
Change reference from a-sysdep.c to sysdep.c in comment.
Update copyright notice.
This set of patch add support for the encoding form parameter.
* mingw32.h (S2WSU): New macro to convert from a string to a
wide-string using the UTF-8 encoding. The S2WS macro supports now only
standard 8bits encoding.
(WS2SU): As above but converting from wide-sring to string.
This is needed as it is necessary to have access to both versions in the
runtime for the form parameter encoding support.
This set of patch add support for the encoding form parameter.
(S2WS): Improve implementation to handle cases where the filename is not
UTF-8 encoded. In this case we default to using the current code page
for the conversion.
* s-crtl-vms64.ads, s-crtl.ads (Filename_Encoding): New enumeration
type (UTF8, ASCII_8bits). This enumeration has a rep clause to match
the constants defined in adaint.h.
(fopen): Add encoding parameter.
(freopen): Idem.
* s-ficobl.ads (AFCB): Add Encoding field to record the filename
encoding. This is needed for the Reset routine (freopen low level-call).
* s-fileio.adb (Open): Decode encoding form parameter and set the
corresponding encoding value into AFCB structure.
(Reset): Pass the encoding value to freopen.
(Close): Move the call to Lock_Task to the beginning of the procedure.
2007-04-06 Geert Bosch <bosch@adacore.com>
Robert Dewar <dewar@adacore.com>
* i-fortra.ads: Add Double_Complex type.
* impunit.adb: (Is_Known_Unit): New function
Add Gnat.Byte_Swapping
Add GNAT.SHA1
Add new Ada 2005 units
Ada.Numerics.Generic_Complex_Arrays, Ada.Numerics.Generic_Real_Arrays,
Ada.Numerics.Complex_Arrays, Ada.Numerics.Real_Arrays,
Ada.Numerics.Long_Complex_Arrays, Ada.Numerics.Long_Long_Complex_Arrays,
Ada.Numerics.Long_Long_Real_Arrays and Ada.Numerics.Long_Real_Arrays
* impunit.ads (Is_Known_Unit): New function
* a-ngcoar.adb, a-ngcoar.ads, a-ngrear.adb,
a-ngrear.ads, a-nlcoar.ads, a-nllcar.ads, a-nllrar.ads, a-nlrear.ads,
a-nucoar.ads, a-nurear.ads, g-bytswa.adb, g-bytswa-x86.adb,
g-bytswa.ads, g-sha1.adb, g-sha1.ads, i-forbla.ads, i-forlap.ads,
s-gearop.adb, s-gearop.ads, s-gecobl.adb, s-gecobl.ads, s-gecola.adb,
s-gecola.ads, s-gerebl.adb, s-gerebl.ads, s-gerela.adb, s-gerela.ads:
New files.
* Makefile.rtl: Add g-bytswa, g-sha1, a-fzteio and a-izteio
* a-fzteio.ads, a-izteio.ads: New Ada 2005 run-time units.
2007-04-06 Eric Botcazou <botcazou@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* init.c: Reuse PA/HP-UX code for IA-64/HP-UX, except
__gnat_adjust_context_for_raise.
(__gnat_init_float): on x86 vxworks 5.x and 6.x, we use the same
implementation of floating point operations as native x86 targets.
So the FPU should be initialized in the same way using finit. Fix
floating point operations accuracy issues.
(__gnat_install_handler, case FreeBSD): Use proper type for sa_sigaction
member in struct sigaction, so as to avoid warning for incompatible
pointer types.
2007-04-06 Serguei Rybin <rybin@adacore.com>
* lib.ads, lib.adb (Tree_Read): Release the memory occupied by the
switches from previously loaded tree
2007-04-06 Thomas Quinot <quinot@adacore.com>
* lib-writ.adb (Write_With_Lines): Factor duplicated code between the
cases where a given dependency has a body or not.
(Write_With_File_Names): New subprogram, common code for the two cases
above.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* lib-xref.ads, lib-xref.adb:
Modify the loop that collects type references, to include interface
types that the type implements. List each of these interfaces when
building the entry for the type.
(Generate_Definition): Initialize component Def and Typ of new entry
in table Xrefs, to avoid to have these components unitialized.
(Output_References): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type.
(Generate_Reference): Add barrier to do not generate the warning
associated with Ada 2005 entities with entities generated by the
expander.
2007-04-06 Robert Dewar <dewar@adacore.com>
Arnaud Charlet <charlet@adacore.com>
Vincent Celier <celier@adacore.com>
* gnat_rm.texi, gnat_ugn.texi: Add -gnatyl documentation
Update 'Exception Handling Control' chapter which was outdated.
Minor fix to documentation of -gnatwq
Remove section "Adapting the Run Time to a New C++ Compiler" because
it is now obsolete.
Add passage on need of -nostart-files in some non-ada-main cases.
Document new switch -eS (/STANDARD_OUTPUT_FOR_COMMANDS) for gnatmake
Update documentation about Interfacing with C++
Add documentation for new gnatmake switch -p
Add missing protocol part in URLs.
Document -gnatyA
Document pragma Compile_Time_Error
Add documentation for Object_Size indicating that stand alone
objects can have a larger size in some cases.
Add node for GNAT.Byte_Swapping, GNAT.SHA1
Update reference to the Ravenscar profile.
Document pragma Unreferenced_Objects
* gnat-style.texi: Fix typo
2007-04-06 Vincent Celier <celier@adacore.com>
* mlib.adb (Building_Library): Only output "building a library..." in
verbose mode
* mlib-prj.adb (Build_Library): Only output lists of object and ALI
files in verbose mode.
* mlib-utl.adb (Ar): Only output the first object files when not in
verbose mode.
(Gcc): Do not display all the object files if not in verbose mode, only
the first one.
2007-04-06 Robert Dewar <dewar@adacore.com>
* namet.ads, namet.adb (wn): Improve this debugging routine. Calling
it no longer destroys the contents of Name_Buffer or Name_Len and
non-standard and invalid names are handled better.
(Get_Decoded_Name_String): Improve performance by using
Name_Has_No_Encodings flag in the name table.
(Is_Valid_Name): New function to determine whether a Name_Id is valid.
Used for debugging printouts.
2007-04-06 Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
Bob Duff <duff@adacore.com>
* par-ch3.adb: (P_Type_Declaration): Set Type_Token_Location
(P_Interface_Type_Definition): Remove the formal Is_Synchronized because
there is no need to generate always a record_definition_node in case
of synchronized interface types.
(P_Type_Declaration): Update calls to P_Interface_Type_Definition.
(P_Null_Exclusion): For AI-447: Remove warnings about "not null" being
illegal in Ada 95, in cases where it is legal. Change the warnings to
errors in other cases. Don't give the error unless the "not null"
parses properly. Correct the source position at which the error occurs.
(P_Known_Discriminant_Part_Opt): Pass Allow_Anonymous_In_95 => True to
P_Null_Exclusion, to suppress "not null" warnings.
(P_Identifier_Declarations): Code cleanup. Removed unrequired label and
associated goto statements.
* par-endh.adb (Pop_End_Context): Allow more flexibility in placement
of END RECORD
* scans.ads (Type_Token_Location): New flag
* par-ch6.adb (P_Mode): Check specifically for case of IN ACCESS
(P_Formal_Part): Pass Allow_Anonymous_In_95 => True to
P_Null_Exclusion, to suppress "not null" warnings.
2007-04-06 Robert Dewar <dewar@adacore.com>
Javier Miranda <miranda@adacore.com>
Bob Duff <duff@adacore.com>
Vincent Celier <celier@adacore.com>
* par-prag.adb (Prag): Add dummy entry for pragma Compile_Time_Error
(Extensions_Allowed): No longer sets Ada_Version
Entry for pragma Unreferenced_Objects
* sem_prag.adb (Analyze_Pragma, case Priority): Force with of
system.tasking if pragma priority used in a procedure
(Analyze_Pragma, case Warning): Handle dot warning switches
(Process_Compile_Time_Warning_Or_Error): New procedure
(Analyze_Pragma): Add processing for Compile_Time_Error
Add support for extra arguments External_Name and Link_Name.
Remove code associated with pragmas CPP_Virtual and CPP_Vtable.
(Process_Import_Or_Interface): Add support for the use of pragma Import
with tagged types.
(Extensions_Allowed): No longer affects Ada_Version
(Analyze_Pragma): Split Is_Abstract flag into Is_Abstract_Subprogram and
Is_Abstract_Type. Make sure these are called only when appropriate.
Add processing for pragma Unreferenced_Objects
* snames.h, snames.ads, snames.adb: Add entry for pragma
Compile_Time_Error
Add new standard name Minimum_Binder_Options for new gprmake
Add new standard names for gprmake: Archive_Suffix,
Library_Auto_Init_Supported, Library_Major_Minor_Id_Supported,
Library_Support, Library_Version_Options,
Shared_Library_Minimum_Options,
Shared_Library_Prefix, Shared_Library_Suffix, Symbolic_Link_Supported.
Change Name_Call to Name_uCall so that it cannot clash with a legal
subprogram name.
Add new standard names Mapping_Spec_Suffix and Mapping_Body_Suffix
Append C_Plus_Plus to convention identifiers as synonym for CPP
Add new standard names Stack and Builder_Switches
Add new standard names: Compiler_Minimum_Options, Global_Config_File,
Library_Builder, Local_Config_File, Objects_Path, Objects_Path_File,
Run_Path_Option, Toolchain_Version.
Entry for pragma Unreferenced_Objects
* switch-c.adb (Scan_Front_End_Switches): Store correct -gnateD
switches, without repetition of "eD". Make sure that last character of
-gnatep= switch is not taken as -gnat switch character.
Complete rewrite of circuit for handling saving compilation options
Occasioned by need to support dot switchs for -gnatw, but cleans up
things in general.
-gnatX does not affect Ada_Version
Include -gnatyA in -gnatg style switches
* sem_warn.ads, sem_warn.adb (Output_Unreferenced_Messages): Exclude
warnings on return objects.
(Warn_On_Useless_Assignment): Exclude warnings on return objects
(Set_Dot_Warning_Switch): New procedure
(Check_References): Add missing case of test for
Has_Pragma_Unreferenced_Objects
(Output_Unreferenced_Messages): Implement effect of new pragma
Unreferenced_Objects, remove special casing of limited controlled
variables.
2007-04-06 Vincent Celier <celier@adacore.com>
* prj-ext.adb (Initialize_Project_Path): New procedure that initialize
the default project path, initially done during elaboration of the
package.
If the prefix returned by Sdefault is null, get the prefix from a call
to Executable_Prefix_Path.
(Project_Path): Call Initialize_Project_Path if Current_Project_Path is
null.
* prj-nmsc.adb (Get_Path_Names_And_Record_Sources): Use the non
canonical directory name to open the directory from which files are
retrieved.
(Record_Other_Sources): Idem.
(Locate_Directory): Add the possibility to create automatically missing
directories when Setup_Projects is True.
Call Locate_Directory so that the directory will be created when
Setup_Projects is True, for object dir, library dir, library ALI dir,
library source copy dir and exec dir.
* prj-pp.adb (Max_Line_Length): Set to 255 for compatibility with older
versions of GNAT.
2007-04-06 Robert Dewar <dewar@adacore.com>
* sem_ch13.ads, sem_ch13.adb (Adjust_Record_For_Reverse_Bit_Order):
Use First/Next_Component_Or_Discriminant
(Analyze_Record_Representation_Clause):
Use First/Next_Component_Or_Discriminant
(Check_Component_Overlap): Use First/Next_Component_Or_Discriminant
(Analyze_Attribute_Definition_Clause, case Value_Size): Reject
definition if type is unconstrained.
(Adjust_Record_For_Reverse_Bit_Order): New procedure
(Analyze_Attribute_Definition_Clause): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type.
(Adjust_Record_For_Reverse_Bit_Order): New procedure
* repinfo.adb (List_Record_Info): Use First/
Next_Component_Or_Discriminant.
* style.ads, styleg-c.adb, styleg-c.ads (Check_Array_Attribute_Index):
New procedure.
* stylesw.ads, stylesw.adb: Recognize new -gnatyA style switch
Include -gnatyA in default switches
* opt.ads: (Warn_On_Non_Local_Exception): New flag
(Warn_On_Reverse_Bit_Order): New flag
(Extensions_Allowed): Update the documentation.
(Warn_On_Questionable_Missing_Parens): Now on by default
* usage.adb: Add documentation of -gnatw.x/X switches
Document new -gnatyA style switch
-gnatq warnings are on by default
2007-04-06 Ed Falis <falis@adacore.com>
* s-carun8.adb, s-carsi8.adb (Compare_Array_?8): modify so that last
full word is no longer compared twice.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
* sem_ch10.adb (Install_Limited_Context_Clauses.
Expand_Limited_With_Clause): Use a new copy of selector name in the
call to Make_With_Clause. This fixes the tree structure for ASIS
purposes. Nothing is changed in the compiler behaviour.
(Process_Body_Clauses): Handle properly use clauses whose prefix is
a package renaming.
(Install_Limited_With_Clauses): Do not install non-limited view when it
is still incomplete.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* sem_ch12.adb (Check_Generic_Actuals): Use first subtype of actual
when capturing size information, instead of base type, which for a
formal array type will be the unconstrained type.
(Analyze_Formal_Object_Declaration): Add check for illegal default
expressions for a formal in object of a limited type.
(Instantiate_Object): Ditto.
(Check_Formal_Package_Instance): Skip entities that are formal objects,
because they were defaulted in the formal package and no check applies
to them.
(Check_Formal_Package_Instance): Extend conformance check to other
discrete types beyond Integer.
(Process_Default): Copy directly the unmatched formal. A generic copy
has already been performed in Analyze_Formal_Package.
(Analyze_Associations): If a formal subprogram has no match, check for
partial parametrization before looking for a default, to prevent
spurious errors.
(Analyze_Package_Instantiation, Analyze_Subprogram_Instantiation): Do
not set the instantiation environment before analyzing the actuals.
Fixes regression on 8515-003 with implementation of AI-133.
Set_Instance_Env checks whether the generic unit is a predefined
unit, in which case the instance must be analyzed with the latest Ada
mode. This setting must take place after analysis of the actuals,
because the actuals must be analyzed and frozen in the Ada mode extant
outside of the current instantiation.
(Save_Env, Restore_Env): Preserve and restore the configuration
parameters so that predefined units can be compiled in the proper Ada
mode.
(Analyze_Formal_Object_Declaration,Analyze_Formal_Subprogram,
Instantiate_Type): Split Is_Abstract flag into Is_Abstract_Subprogram
and Is_Abstract_Type.
(Analyze_Formal_Package): For better error recovery, Add exception
handler to catch Instantion_Error, which can be raised in
Analyze_Associations
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Bob Duff <duff@adacore.com>
Gary Dismukes <dismukes@adacore.com>
* sem_ch4.adb (Try_Primitive_Operation): The call is legal if the
prefix type is a discriminated subtype of the type of the formal.
(Analyze_Allocator): Collect all coextensions regardless of the context.
Whether they can be allocated statically is determined in exp_ch4.
(Analyze_Selected_Component): If the prefix is a limited view and the
non-limited view is available, use the non-limited one.
(Operator_Check): For "X'Access = Y'Access" (which is ambiguous, and
therefore illegal), suggest a qualified expression rather than a type
conversion, because a type conversion would be illegal in this context.
(Anayze_Allocator): Trace recursively all nested allocators so that all
coextensions are on the corresponding list for the root. Do no mark
coextensions if the root allocator is within a declaration for a stack-
allocated object, because the access discriminants will be allocated on
the stack as well.
(Analyze_Call): Remove restriction on calls to limited functions for the
cases of generic actuals for formal objects, defaults for formal objects
and defaults for record components.
(Analyze_Allocator): Before analysis, chain coextensions on the proper
element list. Their expansion is delayed until the enclosing allocator
is processed and its finalization list constructed.
(Try_Primitive_Operation): If the prefix is a concurrent type, looks
for an operation with the given name among the primitive operations of
the corresponding record type.
(Analyze_Selected_Component): If the prefix is a task type that
implements an interface, and there is no entry with the given name,
check whether there is another primitive operation (e.g. a function)
with that name.
(Try_Object_Operation, Analyze_One_Call, Try_Indexed_Call): Handle
properly the indexing of a function call written in prefix form, where
the function returns an array type, and all parameters of the function
except the first have defaults.
(Analyze_Equality_Op): If this is a call to an implicit inequality, keep
the original operands, rather than relocating them, for efficiency and
to work properly when an operand is overloaded.
(Analyze_Allocator,Operator_Check,Remove_Abstract_Operations): Split
Is_Abstract flag into Is_Abstract_Subprogram and Is_Abstract_Type.
(Analyze_Selected_Component): If the prefix is a private extension, only
scan the visible components, not those of the full view.
(Try_Primitive_Operation): If the operation is a procedure, collect all
possible interpretations, as for a function, because in the presence of
classwide parameters several primitive operations of the type can match
the given arguments.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* sem_ch5.adb (Analyze_Assignment): Reject a right-hand side that is a
tag-indeterminate call to an abstract function, when the left-hand side
is not classwide.
(Analyze_Loop_Statement): Improve detection of infinite loops
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Thomas Quinot <quinot@adacore.com>
* sem_ch7.ads, sem_ch7.adb (Inspect_Deferred_Constant_Completion): Move
out of Analyze_Package_Declaration, because processing must be applied
to package bodies as well, for deferred constants completed by pragmas.
(Analyze_Package_Declaration): When the package declaration being
analyzed does not require an explicit body, call Check_Completion.
(May_Need_Implicit_Body): An implicit body is required when a package
spec contains the declaration of a remote access-to-classwide type.
(Analyze_Package_Body): If the package contains RACWs, append the
pending subprogram bodies generated by exp_dist at the end of the body.
(New_Private_Type,Unit_Requires_Body): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type.
(Preserve_Full_Attributes): The full entity list is not an attribute
that must be preserved from full to partial view.
* sem_dist.adb (Add_RAS_Dereference_TSS):
Change primitive name to _Call so it cannot clash with any legal
identifier, and be special-cased in Check_Completion.
Mark the full view of the designated type for the RACW associated with
a RAS as Comes_From_Source to get proper view switching when installing
private declarations.
Provite a placeholder nested package body along with the nested spec
to have a place for Append_RACW_Bodies to generate the calling stubs
and stream attributes.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* sem_ch8.adb (Has_Components): If the argument is an incomplete type
that is a limited view, check the non-limited view if available.
(Undefined): Refine error message for missing with of Text_IO
(Find_Expanded_Name): Use Is_Known_Unit for more accurate error message
to distinguish real missing with cases.
Fix format of all missing with messages
(Analyze_Subprogram_Renaming): Emit proper error message on illegal
renaming as body when renamed entity is abstract.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_type.ads, sem_type.adb (Has_Abstract_Interpretation): Make
predicate recursive, to handle complex expressions on literals whose
spurious ambiguity comes from the abstract interpretation of some
subexpression.
(Interface_Present_In_Ancestor): Add support to concurrent record
types.
(Add_One_Interp,Disambiguate): Split Is_Abstract flag into
Is_Abstract_Subprogram and Is_Abstract_Type.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Javier Miranda <miranda@adacore.com>
* sem_util.ads, sem_util.adb (Object_Access_Level): If the object is a
dereference of a local object R created as a reference to another
object O, use the access level of O.
(Matches_Prefixed_View_Profile): Use common predicate Conforming_Types,
rather than local Same_Formal_Type, to check whether protected operation
overrides an inherited one.
(Same_Formal_Type): New predicate, used when matching signatures of
overriding synchronized operations, to handle the case when a formal
has a type that is a generic actual.
(Is_Aliased_View): Replace check on E_Task_Type and E_Protected_Type by
predicate Is_Concurrent_Type. This ensures supportin case of subtypes.
(Needs_One_Actual): New predicate, for Ada 2005 use, to resolve
syntactic ambiguities involving indexing of function calls that return
arrays.
(Abstract_Interface_List): New subprogram that returns the list of
abstract interfaces associated with a concurrent type or a
concurrent record type.
(Interface_Present_In_Parent): New subprogram used to check if a
given type or some of its parents implement a given interface.
(Collect_Abstract_Interfaces): Add support for concurrent types
with interface types.
(Has_Abstract_Interfaces): Add support for concurrent types with
interface types.
(Is_Parent): New subprogram that determines whether E1 is a parent
of E2. For a concurrent type its parent is the first element of its
list of interface types; for other types this function provides the
same result than Is_Ancestor.
(Enclosing_Subprogram): Add test for N_Extended_Return_Statement.
(Collect_Synchronized_Interfaces): Removed because the subprogram
Collect_Abstract_Interfaces provides this functionality.
(Collect_Abstract_Interfaces): Minor update to give support to
concurrent types and thus avoid undesired code duplication.
(Get_Subprogram_Entity): Handle entry calls.
(May_Be_Lvalue): Include actuals that appear as in-out parameters in
entry calls.
(Enter_Name): Do not give -gnatwh hiding warning for record component
entities, they never result in hiding.
2007-04-06 Ed Schonberg <schonberg@adacore.com>
Robert Dewar <dewar@adacore.com>
* sinfo.ads, sinfo.adb (Coextensions): New element list for allocators,
to chain nested components that are allocators for access discriminants
of the enclosing object.
Add N_Push and N_Pop nodes
New field Exception_Label added
(Local_Raise_Statements): New field in N_Exception_Handler_Node
(Local_Raise_Not_OK): New flag in N_Exception_Handler_Node
(Is_Coextension): New flag for allocators, to mark allocators that
correspond to access discriminants of dynamically allocated objects.
(N_Block_Statement): Document the fact that the corresponding entity
can be an E_Return_Statement.
(Is_Coextension): New flag for allocators.
Remove all code for DSP option
* sprint.ads, sprint.adb: Display basic information for class_wide
subtypes. Add handling of N_Push and N_Pop nodes
2007-04-06 Arnaud Charlet <charlet@adacore.com>
* s-tpobop.adb (Exceptional_Complete_Entry_Body): Undefer abortion
before propagating exception.
2007-04-06 Olivier Hainque <hainque@adacore.com>
* tracebak.c (PC_ADJUST - ia64): -4 instead of -16, expected to yield
an address always within the call instruction from a return address.
2007-04-06 Olivier Hainque <hainque@adacore.com>
Eric Botcazou <botcazou@adacore.com>
* trans.c (call_to_gnu) <TYPE_RETURNS_BY_TARGET_PTR_P>: Return an
expression with a COMPOUND_EXPR including the call instead of emitting
the call directly here.
(gnat_to_gnu) <N_Slice>: Do not return a non-constant low bound if the
high bound is constant and the slice is empty. Tidy.
(tree_transform, case N_Op_Not): Handle properly the case where the
operation applies to a private type whose full view is a modular type.
(Case_Statement_To_gnu): If an alternative is an E_Constant with an
Address_Clause, use the associated Expression as the GNAT tree
representing the choice value to ensure the corresponding GCC tree is
of the proper kind.
(maybe_stabilize_reference): Stabilize COMPOUND_EXPRs as a whole
instead of just the operands, as the base GCC stabilize_reference does.
<CALL_EXPR>: New case. Directly stabilize the call if an lvalue is not
requested; otherwise fail.
(addressable_p) <COMPONENT_REF>: Do not test DECL_NONADDRESSABLE_P.
2007-04-06 Thomas Quinot <quinot@adacore.com>
* uintp.ads, uintp.adb (UI_Div_Rem): New subprogram, extending previous
implementation of UI_Div.
(UI_Div): Reimplement as a call to UI_Div_Rem.
(UI_Rem): Take advantage of the fact that UI_Div_Rem provides the
remainder, avoiding the cost of a multiplication and a subtraction.
(UI_Modular_Inverse): Take advantage of the fact that UI_Div_Rem
provides both quotient and remainder in a single computation.
(UI_Modular_Exponentiation, UI_Modular_Inverse): New modular arithmetic
functions for uint.
(UI_Modular_Inverse): Add a note that the behaviour of this subprogram
is undefined if the given n is not inversible.
2007-04-06 Olivier Hainque <hainque@adacore.com>
* utils2.c (known_alignment): Handle COMPOUND_EXPR, COND_EXPR and
BIT_AND_EXPR. Handle also VIEW_CONVERT_EXPR, as the other conversion
opcodes.
2007-04-06 Eric Botcazou <botcazou@adacore.com>
Olivier Hainque <hainque@adacore.com>
* utils.c (update_pointer_to): Make a copy of the couple of FIELD_DECLs
when updating the contents of the old pointer to an unconstrained array.
(end_subprog_body): Set error_gnat_node to Empty.
(write_record_type_debug_info): Do not be unduly sparing with our bytes.
(unchecked_convert): For subtype to base type conversions, require that
the source be a subtype if it is an integer type.
(builtin_decls): New global, vector of available builtin functions.
(gnat_pushdecl): Add global builtin function declaration nodes to the
builtin_decls list.
(gnat_install_builtins): Adjust comments.
(builtin_function): Set DECL_BUILTIN_CLASS and DECL_FUNCTION_CODE before
calling gnat_pushdecl, so that it knows when it handed a builtin
function declaration node.
(builtin_decl_for): Search the builtin_decls list.
2007-04-06 Eric Botcazou <botcazou@adacore.com>
* s-stchop-vxworks.adb:
(Stack_Check): Raise Storage_Error if the argument has wrapped around.
2007-04-06 Robert Dewar <dewar@adacore.com>
Arnaud Charlet <charlet@adacore.com>
* a-diroro.ads: Inserted the pragma Unimplemented_Unit
* bindgen.adb (Gen_Output_File_Ada): Generate pragma Ada_95 at start
of files
Add mention of -Sev (set initialize_scalars option from environment
variable at run time) in gnatbind usage message.
* elists.ads, elists.adb: (Append_Unique_Elmt): New procedure
* fname-uf.ads: Minor comment fix
* osint.ads: Change pragma Elaborate to Elaborate_All
* par-load.adb: Add documentation.
* sem_cat.ads, sem_cat.adb: Minor code reorganization
* s-parint.ads (RCI_Locator) : Add 'Version' generic formal
* s-secsta.ads: Extra comments
* s-soflin.ads: Minor comment fixes
* s-stratt.ads (Block_Stream_Ops_OK): Removed.
* s-wchcon.ads: Minor comment addition
* treepr.adb: Minor change in message
(Print_Name,Print_Node): Make these debug printouts more robust: print
"no such..." instead of crashing on bad input.
2007-03-30 Rafael Ávila de Espíndola <espindola@google.com>
* trans.c (Attribute_to_gnu): Use get_signed_or_unsigned_type
instead of gnat_signed_or_unsigned_type.
* utils.c (gnat_signed_or_unsigned_type): Remove.
* misc.c (LANG_HOOKS_SIGNED_OR_UNSIGNED_TYPE): Remove
* gigi.h (gnat_signed_or_unsigned_type): Remove
2007-03-09 Roger Sayle <roger@eyesopen.com>
* cuintp.c (UI_To_gnu): Use fold_buildN calls instead of calling
fold with the result of buildN.
* decl.c (gnat_to_gnu_entity): Likewise.
* trans.c (Attribute_to_gnu, gnat_to_gnu, emit_check): Likewise.
* utils.c (finish_record_type, merge_sizes, max_size, convert):
Likewise.
* utils2.c (gnat_truthvalue_conversion, compare_arrays,
nonbinary_modular_operation, build_binary_op, build_unary_op,
build_cond_expr): Likewise.
* utils.c (convert): Use fold_build1 when casting values to void.
* utils2.c (gnat_truthvalue_conversion): Use build_int_cst and
fold_convert instead of convert when appropriate.
2007-03-01 Brooks Moses <brooks.moses@codesourcery.com>
* Make-lang.in: Add install-pdf target as copied from
automake v1.10 rules.
2007-02-28 Andreas Schwab <schwab@suse.de>
* Make-lang.in (doc/gnat_ugn_unw.texi): Depend on
$(gcc_docdir)/include/gcc-common.texi and gcc-vers.texi.
(doc/gnat-style.info): Likewise.
2007-02-26 Brooks Moses <brooks.moses@codesourcery.com>
* gnat-style.texi: Standardize title page.
* gnat_rm.texi: Likewise.
* gnat_ugn.texi: Likewise.
2007-02-25 Mark Mitchell <mark@codesourcery.com>
* decl.c (annotate_value): Adjust for refactoring of tree_map
hierarchy.
2007-02-24 Mark Mitchell <mark@codesourcery.com>
* decl.c (annotate_value): Adjust for refactoring of tree_map
hierarchy.
2007-02-21 Ed Schonberg <schonberg@adacore.com>
PR ada/18819
* sem_ch3.adb (Create_Constrained_Components): for a subtype of an
untagged derived type, add hidden components to keep discriminant
layout consistent, when a given discriminant of the derived type
constraints several discriminants of the parent type.
2007-02-16 Eric Botcazou <ebotcazou@adacore.com>
Sandra Loosemore <sandra@codesourcery.com>
* trans.c (call_to_gnu): Use build_call_list instead of build3 to
build the call expression.
(gnat_stabilize_reference_1): Handle tcc_vl_exp.
* utils.c (max_size) <tcc_exceptional>: Delete.
<tcc_vl_exp>: New case.
<tcc_expression>: Delete CALL_EXPR subcase.
(build_global_cdtor): Use build_call_nary instead of build3.
* utils2.c (build_call_1_expr): Likewise.
(build_call_2_expr): Likewise.
(build_call_0_expr): Likewise.
(build_call_alloc_dealloc): Likewise.
2007-02-07 Andreas Krebbel <krebbel1@de.ibm.com>
* raise-gcc.c (get_region_description_for, get_call_site_action_for,
get_action_description_for): Replace _Unwind_Word with _uleb128_t
and _Unwind_SWord with _sleb128_t.
2007-02-06 Paolo Bonzini <bonzini@gnu.org>
* Make-lang.in (ada/decl.o): Add gt-ada-decl.h dependency.
* decl.c: Include gt-ada-decl.h.
(annotate_value_cache): New.
(annotate_value): Use it instead of TREE_COMPLEXITY.
2007-02-03 Kazu Hirata <kazu@codesourcery.com>
* misc.c, utils2.c: Fix comment typos.
2007-01-24 Roger Sayle <roger@eyesopen.com>
* decl.c (gnat_to_gnu_entity): Use TREE_OVERFLOW instead of
TREE_CONSTANT_OVERFLOW.
(allocatable_size_p, annotate_value): Likewise.
* trans.c (gnat_to_gnu): Likewise.
* utils.c (unchecked_convert): Likewise.
* utils2.c (build_simple_component_ref): Likewise.
2007-01-23 Richard Guenther <rguenther@suse.de>
PR bootstrap/30541
* Make-lang.in: Replace invocations of gnatmake with $(GNATMAKE).
(gnatboot2): Pass staged GNATMAKE instead of STAGE_PREFIX.
(gnatboot3): Likewise.
(GNATBIND): Do not define.
* Makefile.in (GNATBIND): Do not define.
2007-01-08 Richard Guenther <rguenther@suse.de>
* cuintp.c (build_cst_from_int): Use built_int_cst_type.
* trans.c (gnat_to_gnu): Likewise.
Copyright (C) 2007 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Go to most recent revision | Compare with Previous | Blame | View Log