OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [inline.ads] - Rev 749

Go to most recent revision | Compare with Previous | Blame | View Log

------------------------------------------------------------------------------
--                                                                          --
--                         GNAT COMPILER COMPONENTS                         --
--                                                                          --
--                               I N L I N E                                --
--                                                                          --
--                                 S p e c                                  --
--                                                                          --
--          Copyright (C) 1992-2010, Free Software Foundation, Inc.         --
--                                                                          --
-- GNAT is free software;  you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 3,  or (at your option) any later ver- --
-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
-- for  more details.  You should have  received  a copy of the GNU General --
-- Public License  distributed with GNAT; see file COPYING3.  If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license.          --
--                                                                          --
-- GNAT was originally developed  by the GNAT team at  New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc.      --
--                                                                          --
------------------------------------------------------------------------------
 
--  This module handles two kinds of inlining activity:
 
--  a) Instantiation of generic bodies. This is done unconditionally, after
--  analysis and expansion of the main unit.
 
--  b) Compilation of unit bodies that contain the bodies of inlined sub-
--  programs. This is done only if inlining is enabled (-gnatn). Full inlining
--  requires that a) an b) be mutually recursive, because each step may
--  generate another generic expansion and further inlined calls. For now each
--  of them uses a workpile algorithm, but they are called independently from
--  Frontend, and thus are not mutually recursive.
 
with Alloc;
with Opt;   use Opt;
with Sem;   use Sem;
with Table;
with Types; use Types;
 
package Inline is
 
   --------------------------------
   -- Generic Body Instantiation --
   --------------------------------
 
   --  The bodies of generic instantiations are built after semantic analysis
   --  of the main unit is complete. Generic instantiations are saved in a
   --  global data structure, and the bodies constructed by means of a separate
   --  analysis and expansion step.
 
   --  See full description in body of Sem_Ch12 for more details
 
   type Pending_Body_Info is record
      Inst_Node : Node_Id;
      --  Node for instantiation that requires the body
 
      Act_Decl : Node_Id;
      --  Declaration for package or subprogram spec for instantiation
 
      Expander_Status : Boolean;
      --  If the body is instantiated only for semantic checking, expansion
      --  must be inhibited.
 
      Current_Sem_Unit : Unit_Number_Type;
      --  The semantic unit within which the instantiation is found. Must
      --  be restored when compiling the body, to insure that internal enti-
      --  ties use the same counter and are unique over spec and body.
 
      Scope_Suppress           : Suppress_Array;
      Local_Suppress_Stack_Top : Suppress_Stack_Entry_Ptr;
      --  Save suppress information at the point of instantiation. Used to
      --  properly inherit check status active at this point (see RM 11.5
      --  (7.2/2), AI95-00224-01):
      --
      --    "If a checking pragma applies to a generic instantiation, then the
      --    checking pragma also applies to the instance. If a checking pragma
      --    applies to a call to a subprogram that has a pragma Inline applied
      --    to it, then the checking pragma also applies to the inlined
      --    subprogram body".
      --
      --  This means we have to capture this information from the current scope
      --  at the point of instantiation.
 
      Version : Ada_Version_Type;
      --  The body must be compiled with the same language version as the
      --  spec. The version may be set by a configuration pragma in a separate
      --  file or in the current file, and may differ from body to body.
   end record;
 
   package Pending_Instantiations is new Table.Table (
     Table_Component_Type => Pending_Body_Info,
     Table_Index_Type     => Int,
     Table_Low_Bound      => 0,
     Table_Initial        => Alloc.Pending_Instantiations_Initial,
     Table_Increment      => Alloc.Pending_Instantiations_Increment,
     Table_Name           => "Pending_Instantiations");
 
   --  The following table records subprograms and packages for which
   --  generation of subprogram descriptors must be delayed.
 
   package Pending_Descriptor is new Table.Table (
     Table_Component_Type => Entity_Id,
     Table_Index_Type     => Int,
     Table_Low_Bound      => 0,
     Table_Initial        => Alloc.Pending_Instantiations_Initial,
     Table_Increment      => Alloc.Pending_Instantiations_Increment,
     Table_Name           => "Pending_Descriptor");
 
   Analyzing_Inlined_Bodies : Boolean;
   --  This flag is set False by the call to Initialize, and then is set
   --  True by the call to Analyze_Inlined_Bodies. It is used to suppress
   --  generation of subprogram descriptors for inlined bodies.
 
   -----------------
   -- Subprograms --
   -----------------
 
   procedure Initialize;
   --  Initialize internal tables
 
   procedure Lock;
   --  Lock internal tables before calling backend
 
   procedure Instantiate_Bodies;
   --  This procedure is called after semantic analysis is complete, to
   --  instantiate the bodies of generic instantiations that appear in the
   --  compilation unit.
 
   procedure Add_Inlined_Body (E : Entity_Id);
   --  E is an inlined subprogram appearing in a call, either explicitly, or
   --  a discriminant check for which gigi builds a call.  Add E's enclosing
   --  unit to Inlined_Bodies so that body of E can be subsequently retrieved
   --  and analyzed.
 
   procedure Analyze_Inlined_Bodies;
   --  At end of compilation, analyze the bodies of all units that contain
   --  inlined subprograms that are actually called.
 
   procedure Check_Body_For_Inlining (N : Node_Id; P : Entity_Id);
   --  If front-end inlining is enabled and a package declaration contains
   --  inlined subprograms, load and compile the package body to collect the
   --  bodies of these subprograms, so they are available to inline calls.
   --  N is the compilation unit for the package.
 
   procedure Remove_Dead_Instance (N : Node_Id);
   --  If an instantiation appears in unreachable code, delete the pending
   --  body instance.
 
end Inline;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.