OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [par-ch13.adb] - Rev 706

Compare with Previous | Blame | View Log

------------------------------------------------------------------------------
--                                                                          --
--                         GNAT COMPILER COMPONENTS                         --
--                                                                          --
--                             P A R . C H 1 3                              --
--                                                                          --
--                                 B o d y                                  --
--                                                                          --
--          Copyright (C) 1992-2012, Free Software Foundation, Inc.         --
--                                                                          --
-- GNAT is free software;  you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 3,  or (at your option) any later ver- --
-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
-- for  more details.  You should have  received  a copy of the GNU General --
-- Public License  distributed with GNAT; see file COPYING3.  If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license.          --
--                                                                          --
-- GNAT was originally developed  by the GNAT team at  New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc.      --
--                                                                          --
------------------------------------------------------------------------------
 
pragma Style_Checks (All_Checks);
--  Turn off subprogram body ordering check. Subprograms are in order
--  by RM section rather than alphabetical
 
separate (Par)
package body Ch13 is
 
   --  Local functions, used only in this chapter
 
   function P_Component_Clause return Node_Id;
   function P_Mod_Clause return Node_Id;
 
   -----------------------------------
   -- Aspect_Specifications_Present --
   -----------------------------------
 
   function Aspect_Specifications_Present
     (Strict : Boolean := Ada_Version < Ada_2012) return Boolean
   is
      Scan_State : Saved_Scan_State;
      Result     : Boolean;
 
   begin
      --  Definitely must have WITH to consider aspect specs to be present
 
      --  Note that this means that if we have a semicolon, we immediately
      --  return False. There is a case in which this is not optimal, namely
      --  something like
 
      --    type R is new Integer;
      --      with bla bla;
 
      --  where the semicolon is redundant, but scanning forward for it would
      --  be too expensive. Instead we pick up the aspect specifications later
      --  as a bogus declaration, and diagnose the semicolon at that point.
 
      if Token /= Tok_With then
         return False;
      end if;
 
      --  Have a WITH, see if it looks like an aspect specification
 
      Save_Scan_State (Scan_State);
      Scan; -- past WITH
 
      --  If no identifier, then consider that we definitely do not have an
      --  aspect specification.
 
      if Token /= Tok_Identifier then
         Result := False;
 
      --  This is where we pay attention to the Strict mode. Normally when we
      --  are in Ada 2012 mode, Strict is False, and we consider that we have
      --  an aspect specification if the identifier is an aspect name (even if
      --  not followed by =>) or the identifier is not an aspect name but is
      --  followed by =>. P_Aspect_Specifications will generate messages if the
      --  aspect specification is ill-formed.
 
      elsif not Strict then
         if Get_Aspect_Id (Token_Name) /= No_Aspect then
            Result := True;
         else
            Scan; -- past identifier
            Result := Token = Tok_Arrow;
         end if;
 
      --  If earlier than Ada 2012, check for valid aspect identifier (possibly
      --  completed with 'CLASS) followed by an arrow, and consider that this
      --  is still an aspect specification so we give an appropriate message.
 
      else
         if Get_Aspect_Id (Token_Name) = No_Aspect then
            Result := False;
 
         else
            Scan; -- past aspect name
 
            Result := False;
 
            if Token = Tok_Arrow then
               Result := True;
 
            elsif Token = Tok_Apostrophe then
               Scan; -- past apostrophe
 
               if Token = Tok_Identifier
                 and then Token_Name = Name_Class
               then
                  Scan; -- past CLASS
 
                  if Token = Tok_Arrow then
                     Result := True;
                  end if;
               end if;
            end if;
 
            if Result then
               Restore_Scan_State (Scan_State);
               Error_Msg_SC ("|aspect specification is an Ada 2012 feature");
               Error_Msg_SC ("\|unit must be compiled with -gnat2012 switch");
               return True;
            end if;
         end if;
      end if;
 
      Restore_Scan_State (Scan_State);
      return Result;
   end Aspect_Specifications_Present;
 
   --------------------------------------------
   -- 13.1  Representation Clause (also I.7) --
   --------------------------------------------
 
   --  REPRESENTATION_CLAUSE ::=
   --    ATTRIBUTE_DEFINITION_CLAUSE
   --  | ENUMERATION_REPRESENTATION_CLAUSE
   --  | RECORD_REPRESENTATION_CLAUSE
   --  | AT_CLAUSE
 
   --  ATTRIBUTE_DEFINITION_CLAUSE ::=
   --    for LOCAL_NAME'ATTRIBUTE_DESIGNATOR use EXPRESSION;
   --  | for LOCAL_NAME'ATTRIBUTE_DESIGNATOR use NAME;
 
   --  Note: in Ada 83, the expression must be a simple expression
 
   --  AT_CLAUSE ::= for DIRECT_NAME use at EXPRESSION;
 
   --  Note: in Ada 83, the expression must be a simple expression
 
   --  ENUMERATION_REPRESENTATION_CLAUSE ::=
   --    for first_subtype_LOCAL_NAME use ENUMERATION_AGGREGATE;
 
   --  ENUMERATION_AGGREGATE ::= ARRAY_AGGREGATE
 
   --  RECORD_REPRESENTATION_CLAUSE ::=
   --    for first_subtype_LOCAL_NAME use
   --      record [MOD_CLAUSE]
   --        {COMPONENT_CLAUSE}
   --      end record;
 
   --  Note: for now we allow only a direct name as the local name in the
   --  above constructs. This probably needs changing later on ???
 
   --  The caller has checked that the initial token is FOR
 
   --  Error recovery: cannot raise Error_Resync, if an error occurs,
   --  the scan is repositioned past the next semicolon.
 
   function P_Representation_Clause return Node_Id is
      For_Loc         : Source_Ptr;
      Name_Node       : Node_Id;
      Prefix_Node     : Node_Id;
      Attr_Name       : Name_Id;
      Identifier_Node : Node_Id;
      Rep_Clause_Node : Node_Id;
      Expr_Node       : Node_Id;
      Record_Items    : List_Id;
 
   begin
      For_Loc := Token_Ptr;
      Scan; -- past FOR
 
      --  Note that the name in a representation clause is always a simple
      --  name, even in the attribute case, see AI-300 which made this so!
 
      Identifier_Node := P_Identifier (C_Use);
 
      --  Check case of qualified name to give good error message
 
      if Token = Tok_Dot then
         Error_Msg_SC
            ("representation clause requires simple name!");
 
         loop
            exit when Token /= Tok_Dot;
            Scan; -- past dot
            Discard_Junk_Node (P_Identifier);
         end loop;
      end if;
 
      --  Attribute Definition Clause
 
      if Token = Tok_Apostrophe then
 
         --  Allow local names of the form a'b'.... This enables
         --  us to parse class-wide streams attributes correctly.
 
         Name_Node := Identifier_Node;
         while Token = Tok_Apostrophe loop
 
            Scan; -- past apostrophe
 
            Identifier_Node := Token_Node;
            Attr_Name := No_Name;
 
            if Token = Tok_Identifier then
               Attr_Name := Token_Name;
 
               if not Is_Attribute_Name (Attr_Name) then
                  Signal_Bad_Attribute;
               end if;
 
               if Style_Check then
                  Style.Check_Attribute_Name (False);
               end if;
 
            --  Here for case of attribute designator is not an identifier
 
            else
               if Token = Tok_Delta then
                  Attr_Name := Name_Delta;
 
               elsif Token = Tok_Digits then
                  Attr_Name := Name_Digits;
 
               elsif Token = Tok_Access then
                  Attr_Name := Name_Access;
 
               else
                  Error_Msg_AP ("attribute designator expected");
                  raise Error_Resync;
               end if;
 
               if Style_Check then
                  Style.Check_Attribute_Name (True);
               end if;
            end if;
 
            --  We come here with an OK attribute scanned, and the
            --  corresponding Attribute identifier node stored in Ident_Node.
 
            Prefix_Node := Name_Node;
            Name_Node := New_Node (N_Attribute_Reference, Prev_Token_Ptr);
            Set_Prefix (Name_Node, Prefix_Node);
            Set_Attribute_Name (Name_Node, Attr_Name);
            Scan;
         end loop;
 
         Rep_Clause_Node := New_Node (N_Attribute_Definition_Clause, For_Loc);
         Set_Name (Rep_Clause_Node, Prefix_Node);
         Set_Chars (Rep_Clause_Node, Attr_Name);
         T_Use;
 
         Expr_Node := P_Expression_No_Right_Paren;
         Check_Simple_Expression_In_Ada_83 (Expr_Node);
         Set_Expression (Rep_Clause_Node, Expr_Node);
 
      else
         TF_Use;
         Rep_Clause_Node := Empty;
 
         --  AT follows USE (At Clause)
 
         if Token = Tok_At then
            Scan; -- past AT
            Rep_Clause_Node := New_Node (N_At_Clause, For_Loc);
            Set_Identifier (Rep_Clause_Node, Identifier_Node);
            Expr_Node := P_Expression_No_Right_Paren;
            Check_Simple_Expression_In_Ada_83 (Expr_Node);
            Set_Expression (Rep_Clause_Node, Expr_Node);
 
         --  RECORD follows USE (Record Representation Clause)
 
         elsif Token = Tok_Record then
            Record_Items := P_Pragmas_Opt;
            Rep_Clause_Node :=
              New_Node (N_Record_Representation_Clause, For_Loc);
            Set_Identifier (Rep_Clause_Node, Identifier_Node);
 
            Push_Scope_Stack;
            Scope.Table (Scope.Last).Etyp := E_Record;
            Scope.Table (Scope.Last).Ecol := Start_Column;
            Scope.Table (Scope.Last).Sloc := Token_Ptr;
            Scan; -- past RECORD
            Record_Items := P_Pragmas_Opt;
 
            --  Possible Mod Clause
 
            if Token = Tok_At then
               Set_Mod_Clause (Rep_Clause_Node, P_Mod_Clause);
               Set_Pragmas_Before (Mod_Clause (Rep_Clause_Node), Record_Items);
               Record_Items := P_Pragmas_Opt;
            end if;
 
            if No (Record_Items) then
               Record_Items := New_List;
            end if;
 
            Set_Component_Clauses (Rep_Clause_Node, Record_Items);
 
            --  Loop through component clauses
 
            loop
               if Token not in Token_Class_Name then
                  exit when Check_End;
               end if;
 
               Append (P_Component_Clause, Record_Items);
               P_Pragmas_Opt (Record_Items);
            end loop;
 
         --  Left paren follows USE (Enumeration Representation Clause)
 
         elsif Token = Tok_Left_Paren then
            Rep_Clause_Node :=
              New_Node (N_Enumeration_Representation_Clause, For_Loc);
            Set_Identifier (Rep_Clause_Node, Identifier_Node);
            Set_Array_Aggregate (Rep_Clause_Node, P_Aggregate);
 
         --  Some other token follows FOR (invalid representation clause)
 
         else
            Error_Msg_SC ("invalid representation clause");
            raise Error_Resync;
         end if;
      end if;
 
      TF_Semicolon;
      return Rep_Clause_Node;
 
   exception
      when Error_Resync =>
         Resync_Past_Semicolon;
         return Error;
 
   end P_Representation_Clause;
 
   ----------------------
   -- 13.1  Local Name --
   ----------------------
 
   --  Local name is always parsed by its parent. In the case of its use in
   --  pragmas, the check for a local name is handled in Par.Prag and allows
   --  all the possible forms of local name. For the uses in chapter 13, we
   --  currently only allow a direct name, but this should probably change???
 
   ---------------------------
   -- 13.1  At Clause (I.7) --
   ---------------------------
 
   --  Parsed by P_Representation_Clause (13.1)
 
   ---------------------------------------
   -- 13.3  Attribute Definition Clause --
   ---------------------------------------
 
   --  Parsed by P_Representation_Clause (13.1)
 
   --------------------------------
   -- 13.1  Aspect Specification --
   --------------------------------
 
   --  ASPECT_SPECIFICATION ::=
   --    with ASPECT_MARK [=> ASPECT_DEFINITION] {,
   --         ASPECT_MARK [=> ASPECT_DEFINITION] }
 
   --  ASPECT_MARK ::= aspect_IDENTIFIER['Class]
 
   --  ASPECT_DEFINITION ::= NAME | EXPRESSION
 
   --  Error recovery: cannot raise Error_Resync
 
   procedure P_Aspect_Specifications
     (Decl      : Node_Id;
      Semicolon : Boolean := True)
   is
      Aspects : List_Id;
      Aspect  : Node_Id;
      A_Id    : Aspect_Id;
      OK      : Boolean;
      Ptr     : Source_Ptr;
 
   begin
      --  Check if aspect specification present
 
      if not Aspect_Specifications_Present then
         if Semicolon then
            TF_Semicolon;
         end if;
 
         return;
      end if;
 
      --  Aspect Specification is present
 
      Ptr := Token_Ptr;
      Scan; -- past WITH
 
      --  Here we have an aspect specification to scan, note that we don't
      --  set the flag till later, because it may turn out that we have no
      --  valid aspects in the list.
 
      Aspects := Empty_List;
      loop
         OK := True;
 
         if Token /= Tok_Identifier then
            Error_Msg_SC ("aspect identifier expected");
 
            if Semicolon then
               Resync_Past_Semicolon;
            end if;
 
            return;
         end if;
 
         --  We have an identifier (which should be an aspect identifier)
 
         A_Id := Get_Aspect_Id (Token_Name);
         Aspect :=
           Make_Aspect_Specification (Token_Ptr,
             Identifier => Token_Node);
 
         --  No valid aspect identifier present
 
         if A_Id = No_Aspect then
            Error_Msg_SC ("aspect identifier expected");
 
            --  Check bad spelling
 
            for J in Aspect_Id loop
               if Is_Bad_Spelling_Of (Token_Name, Aspect_Names (J)) then
                  Error_Msg_Name_1 := Aspect_Names (J);
                  Error_Msg_SC -- CODEFIX
                    ("\possible misspelling of%");
                  exit;
               end if;
            end loop;
 
            Scan; -- past incorrect identifier
 
            if Token = Tok_Apostrophe then
               Scan; -- past '
               Scan; -- past presumably CLASS
            end if;
 
            if Token = Tok_Arrow then
               Scan; -- Past arrow
               Set_Expression (Aspect, P_Expression);
               OK := False;
 
            elsif Token = Tok_Comma then
               OK := False;
 
            else
               if Semicolon then
                  Resync_Past_Semicolon;
               end if;
 
               return;
            end if;
 
         --  OK aspect scanned
 
         else
            Scan; -- past identifier
 
            --  Check for 'Class present
 
            if Token = Tok_Apostrophe then
               if not Class_Aspect_OK (A_Id) then
                  Error_Msg_Node_1 := Identifier (Aspect);
                  Error_Msg_SC ("aspect& does not permit attribute here");
                  Scan; -- past apostrophe
                  Scan; -- past presumed CLASS
                  OK := False;
 
               else
                  Scan; -- past apostrophe
 
                  if Token /= Tok_Identifier
                    or else Token_Name /= Name_Class
                  then
                     Error_Msg_SC ("Class attribute expected here");
                     OK := False;
 
                     if Token = Tok_Identifier then
                        Scan; -- past identifier not CLASS
                     end if;
 
                  else
                     Scan; -- past CLASS
                     Set_Class_Present (Aspect);
                  end if;
               end if;
            end if;
 
            --  Test case of missing aspect definition
 
            if Token = Tok_Comma
              or else Token = Tok_Semicolon
            then
               if Aspect_Argument (A_Id) /= Optional then
                  Error_Msg_Node_1 := Identifier (Aspect);
                  Error_Msg_AP ("aspect& requires an aspect definition");
                  OK := False;
               end if;
 
            elsif not Semicolon and then Token /= Tok_Arrow then
               if Aspect_Argument (A_Id) /= Optional then
 
                  --  The name or expression may be there, but the arrow is
                  --  missing. Skip to the end of the declaration.
 
                  T_Arrow;
                  Resync_To_Semicolon;
               end if;
 
            --  Here we have an aspect definition
 
            else
               if Token = Tok_Arrow then
                  Scan; -- past arrow
               else
                  T_Arrow;
                  OK := False;
               end if;
 
               if Aspect_Argument (A_Id) = Name then
                  Set_Expression (Aspect, P_Name);
               else
                  Set_Expression (Aspect, P_Expression);
               end if;
            end if;
 
            --  If OK clause scanned, add it to the list
 
            if OK then
               Append (Aspect, Aspects);
            end if;
 
            if Token = Tok_Comma then
               Scan; -- past comma
               goto Continue;
 
            --  Recognize the case where a comma is missing between two
            --  aspects, issue an error and proceed with next aspect.
 
            elsif Token = Tok_Identifier
              and then Get_Aspect_Id (Token_Name) /= No_Aspect
            then
               declare
                  Scan_State : Saved_Scan_State;
 
               begin
                  Save_Scan_State (Scan_State);
                  Scan; -- past identifier
 
                  if Token = Tok_Arrow then
                     Restore_Scan_State (Scan_State);
                     Error_Msg_AP -- CODEFIX
                       ("|missing "",""");
                     goto Continue;
 
                  else
                     Restore_Scan_State (Scan_State);
                  end if;
               end;
 
            --  Recognize the case where a semicolon was mistyped for a comma
            --  between two aspects, issue an error and proceed with next
            --  aspect.
 
            elsif Token = Tok_Semicolon then
               declare
                  Scan_State : Saved_Scan_State;
 
               begin
                  Save_Scan_State (Scan_State);
                  Scan; -- past semicolon
 
                  if Token = Tok_Identifier
                    and then Get_Aspect_Id (Token_Name) /= No_Aspect
                  then
                     Scan; -- past identifier
 
                     if Token = Tok_Arrow then
                        Restore_Scan_State (Scan_State);
                        Error_Msg_SC -- CODEFIX
                          ("|"";"" should be "",""");
                        Scan; -- past semicolon
                        goto Continue;
 
                     else
                        Restore_Scan_State (Scan_State);
                     end if;
 
                  else
                     Restore_Scan_State (Scan_State);
                  end if;
               end;
            end if;
 
            --  Must be terminator character
 
            if Semicolon then
               T_Semicolon;
            end if;
 
            exit;
 
         <<Continue>>
            null;
         end if;
      end loop;
 
      --  Here if aspects present
 
      if Is_Non_Empty_List (Aspects) then
 
         --  If Decl is Empty, we just ignore the aspects (the caller in this
         --  case has always issued an appropriate error message).
 
         if Decl = Empty then
            null;
 
         --  If Decl is Error, we ignore the aspects, and issue a message
 
         elsif Decl = Error then
            Error_Msg ("aspect specifications not allowed here", Ptr);
 
         --  Here aspects are allowed, and we store them
 
         else
            Set_Parent (Aspects, Decl);
            Set_Aspect_Specifications (Decl, Aspects);
         end if;
      end if;
   end P_Aspect_Specifications;
 
   ---------------------------------------------
   -- 13.4  Enumeration Representation Clause --
   ---------------------------------------------
 
   --  Parsed by P_Representation_Clause (13.1)
 
   ---------------------------------
   -- 13.4  Enumeration Aggregate --
   ---------------------------------
 
   --  Parsed by P_Representation_Clause (13.1)
 
   ------------------------------------------
   -- 13.5.1  Record Representation Clause --
   ------------------------------------------
 
   --  Parsed by P_Representation_Clause (13.1)
 
   ------------------------------
   -- 13.5.1  Mod Clause (I.8) --
   ------------------------------
 
   --  MOD_CLAUSE ::= at mod static_EXPRESSION;
 
   --  Note: in Ada 83, the expression must be a simple expression
 
   --  The caller has checked that the initial Token is AT
 
   --  Error recovery: cannot raise Error_Resync
 
   --  Note: the caller is responsible for setting the Pragmas_Before field
 
   function P_Mod_Clause return Node_Id is
      Mod_Node  : Node_Id;
      Expr_Node : Node_Id;
 
   begin
      Mod_Node := New_Node (N_Mod_Clause, Token_Ptr);
      Scan; -- past AT
      T_Mod;
      Expr_Node := P_Expression_No_Right_Paren;
      Check_Simple_Expression_In_Ada_83 (Expr_Node);
      Set_Expression (Mod_Node, Expr_Node);
      TF_Semicolon;
      return Mod_Node;
   end P_Mod_Clause;
 
   ------------------------------
   -- 13.5.1  Component Clause --
   ------------------------------
 
   --  COMPONENT_CLAUSE ::=
   --    COMPONENT_CLAUSE_COMPONENT_NAME at POSITION
   --      range FIRST_BIT .. LAST_BIT;
 
   --  COMPONENT_CLAUSE_COMPONENT_NAME ::=
   --    component_DIRECT_NAME
   --  | component_DIRECT_NAME'ATTRIBUTE_DESIGNATOR
   --  | FIRST_SUBTYPE_DIRECT_NAME'ATTRIBUTE_DESIGNATOR
 
   --  POSITION ::= static_EXPRESSION
 
   --  Note: in Ada 83, the expression must be a simple expression
 
   --  FIRST_BIT ::= static_SIMPLE_EXPRESSION
   --  LAST_BIT ::= static_SIMPLE_EXPRESSION
 
   --  Note: the AARM V2.0 grammar has an error at this point, it uses
   --  EXPRESSION instead of SIMPLE_EXPRESSION for FIRST_BIT and LAST_BIT
 
   --  Error recovery: cannot raise Error_Resync
 
   function P_Component_Clause return Node_Id is
      Component_Node : Node_Id;
      Comp_Name      : Node_Id;
      Expr_Node      : Node_Id;
 
   begin
      Component_Node := New_Node (N_Component_Clause, Token_Ptr);
      Comp_Name := P_Name;
 
      if Nkind (Comp_Name) = N_Identifier
        or else Nkind (Comp_Name) = N_Attribute_Reference
      then
         Set_Component_Name (Component_Node, Comp_Name);
      else
         Error_Msg_N
           ("component name must be direct name or attribute", Comp_Name);
         Set_Component_Name (Component_Node, Error);
      end if;
 
      Set_Sloc (Component_Node, Token_Ptr);
      T_At;
      Expr_Node := P_Expression_No_Right_Paren;
      Check_Simple_Expression_In_Ada_83 (Expr_Node);
      Set_Position (Component_Node, Expr_Node);
      T_Range;
      Expr_Node := P_Expression_No_Right_Paren;
      Check_Simple_Expression_In_Ada_83 (Expr_Node);
      Set_First_Bit (Component_Node, Expr_Node);
      T_Dot_Dot;
      Expr_Node := P_Expression_No_Right_Paren;
      Check_Simple_Expression_In_Ada_83 (Expr_Node);
      Set_Last_Bit (Component_Node, Expr_Node);
      TF_Semicolon;
      return Component_Node;
   end P_Component_Clause;
 
   ----------------------
   -- 13.5.1  Position --
   ----------------------
 
   --  Parsed by P_Component_Clause (13.5.1)
 
   -----------------------
   -- 13.5.1  First Bit --
   -----------------------
 
   --  Parsed by P_Component_Clause (13.5.1)
 
   ----------------------
   -- 13.5.1  Last Bit --
   ----------------------
 
   --  Parsed by P_Component_Clause (13.5.1)
 
   --------------------------
   -- 13.8  Code Statement --
   --------------------------
 
   --  CODE_STATEMENT ::= QUALIFIED_EXPRESSION
 
   --  On entry the caller has scanned the SUBTYPE_MARK (passed in as the
   --  single argument, and the scan points to the apostrophe.
 
   --  Error recovery: can raise Error_Resync
 
   function P_Code_Statement (Subtype_Mark : Node_Id) return Node_Id is
      Node1 : Node_Id;
 
   begin
      Scan; -- past apostrophe
 
      --  If left paren, then we have a possible code statement
 
      if Token = Tok_Left_Paren then
         Node1 := New_Node (N_Code_Statement, Sloc (Subtype_Mark));
         Set_Expression (Node1, P_Qualified_Expression (Subtype_Mark));
         TF_Semicolon;
         return Node1;
 
      --  Otherwise we have an illegal range attribute. Note that P_Name
      --  ensures that Token = Tok_Range is the only possibility left here.
 
      else -- Token = Tok_Range
         Error_Msg_SC ("RANGE attribute illegal here!");
         raise Error_Resync;
      end if;
 
   end P_Code_Statement;
 
end Ch13;
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.