Subversion Repositories openrisc

------------------------------------------------------------------------------
--                                                                          --
--                 GNAT RUN-TIME LIBRARY (GNARL) COMPONENTS                 --
--                                                                          --
--                     S Y S T E M . I N T E R R U P T S                    --
--                                                                          --
--                                  B o d y                                 --
--                                                                          --
--         Copyright (C) 1992-2009, Free Software Foundation, Inc.          --
--                                                                          --
-- GNARL is free software; you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 3,  or (at your option) any later ver- --
-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.                                     --
--                                                                          --
-- As a special exception under Section 7 of GPL version 3, you are granted --
-- additional permissions described in the GCC Runtime Library Exception,   --
-- version 3.1, as published by the Free Software Foundation.               --
--                                                                          --
-- You should have received a copy of the GNU General Public License and    --
-- a copy of the GCC Runtime Library Exception along with this program;     --
-- see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see    --
-- <http://www.gnu.org/licenses/>.                                          --
--                                                                          --
-- GNARL was developed by the GNARL team at Florida State University.       --
-- Extensive contributions were provided by Ada Core Technologies, Inc.     --
--                                                                          --
------------------------------------------------------------------------------
 
--  This is an OpenVMS/Alpha version of this package
 
--  Invariants:
 
--  Once we associate a Server_Task with an interrupt, the task never
--  goes away, and we never remove the association.
 
--  There is no more than one interrupt per Server_Task and no more than
--  one Server_Task per interrupt.
 
--  Within this package, the lock L is used to protect the various status
--  tables. If there is a Server_Task associated with an interrupt, we use
--  the per-task lock of the Server_Task instead so that we protect the
--  status between Interrupt_Manager and Server_Task. Protection among
--  service requests are done using User Request to Interrupt_Manager
--  rendezvous.
 
with Ada.Task_Identification;
with Ada.Unchecked_Conversion;
 
with System.Task_Primitives;
with System.Interrupt_Management;
 
with System.Interrupt_Management.Operations;
pragma Elaborate_All (System.Interrupt_Management.Operations);
 
with System.Task_Primitives.Operations;
with System.Task_Primitives.Interrupt_Operations;
with System.Storage_Elements;
with System.Tasking.Utilities;
 
with System.Tasking.Rendezvous;
pragma Elaborate_All (System.Tasking.Rendezvous);
 
with System.Tasking.Initialization;
with System.Parameters;
 
package body System.Interrupts is
 
   use Tasking;
   use System.Parameters;
 
   package POP renames System.Task_Primitives.Operations;
   package PIO renames System.Task_Primitives.Interrupt_Operations;
   package IMNG renames System.Interrupt_Management;
   package IMOP renames System.Interrupt_Management.Operations;
 
   function To_System is new Ada.Unchecked_Conversion
     (Ada.Task_Identification.Task_Id, Task_Id);
 
   -----------------
   -- Local Tasks --
   -----------------
 
   --  WARNING: System.Tasking.Stages performs calls to this task with
   --  low-level constructs. Do not change this spec without synchronizing it.
 
   task Interrupt_Manager is
      entry Detach_Interrupt_Entries (T : Task_Id);
 
      entry Initialize (Mask : IMNG.Interrupt_Mask);
 
      entry Attach_Handler
        (New_Handler : Parameterless_Handler;
         Interrupt   : Interrupt_ID;
         Static      : Boolean;
         Restoration : Boolean := False);
 
      entry Exchange_Handler
        (Old_Handler : out Parameterless_Handler;
         New_Handler : Parameterless_Handler;
         Interrupt   : Interrupt_ID;
         Static      : Boolean);
 
      entry Detach_Handler
        (Interrupt   : Interrupt_ID;
         Static      : Boolean);
 
      entry Bind_Interrupt_To_Entry
        (T         : Task_Id;
         E         : Task_Entry_Index;
         Interrupt : Interrupt_ID);
 
      entry Block_Interrupt (Interrupt : Interrupt_ID);
 
      entry Unblock_Interrupt (Interrupt : Interrupt_ID);
 
      entry Ignore_Interrupt (Interrupt : Interrupt_ID);
 
      entry Unignore_Interrupt (Interrupt : Interrupt_ID);
 
      pragma Interrupt_Priority (System.Interrupt_Priority'Last);
   end Interrupt_Manager;
 
   task type Server_Task (Interrupt : Interrupt_ID) is
      pragma Priority (System.Interrupt_Priority'Last);
      --  Note: the above pragma Priority is strictly speaking improper since
      --  it is outside the range of allowed priorities, but the compiler
      --  treats system units specially and does not apply this range checking
      --  rule to system units.
 
   end Server_Task;
 
   type Server_Task_Access is access Server_Task;
 
   -------------------------------
   -- Local Types and Variables --
   -------------------------------
 
   type Entry_Assoc is record
      T : Task_Id;
      E : Task_Entry_Index;
   end record;
 
   type Handler_Assoc is record
      H      : Parameterless_Handler;
      Static : Boolean;   --  Indicates static binding;
   end record;
 
   User_Handler : array (Interrupt_ID'Range) of Handler_Assoc :=
                    (others => (null, Static => False));
   pragma Volatile_Components (User_Handler);
   --  Holds the protected procedure handler (if any) and its Static
   --  information for each interrupt. A handler is a Static one if it is
   --  specified through the pragma Attach_Handler. Attach_Handler. Otherwise,
   --  not static)
 
   User_Entry : array (Interrupt_ID'Range) of Entry_Assoc :=
                  (others => (T => Null_Task, E => Null_Task_Entry));
   pragma Volatile_Components (User_Entry);
   --  Holds the task and entry index (if any) for each interrupt
 
   Blocked : constant array (Interrupt_ID'Range) of Boolean :=
     (others => False);
   --  ??? pragma Volatile_Components (Blocked);
   --  True iff the corresponding interrupt is blocked in the process level
 
   Ignored : array (Interrupt_ID'Range) of Boolean := (others => False);
   pragma Volatile_Components (Ignored);
   --  True iff the corresponding interrupt is blocked in the process level
 
   Last_Unblocker : constant array (Interrupt_ID'Range) of Task_Id :=
     (others => Null_Task);
--  ??? pragma Volatile_Components (Last_Unblocker);
   --  Holds the ID of the last Task which Unblocked this Interrupt.
   --  It contains Null_Task if no tasks have ever requested the
   --  Unblocking operation or the Interrupt is currently Blocked.
 
   Server_ID : array (Interrupt_ID'Range) of Task_Id :=
                 (others => Null_Task);
   pragma Atomic_Components (Server_ID);
   --  Holds the Task_Id of the Server_Task for each interrupt. Task_Id is
   --  needed to accomplish locking per Interrupt base. Also is needed to
   --  decide whether to create a new Server_Task.
 
   --  Type and Head, Tail of the list containing Registered Interrupt
   --  Handlers. These definitions are used to register the handlers specified
   --  by the pragma Interrupt_Handler.
 
   type Registered_Handler;
   type R_Link is access all Registered_Handler;
 
   type Registered_Handler is record
      H :    System.Address := System.Null_Address;
      Next : R_Link := null;
   end record;
 
   Registered_Handler_Head : R_Link := null;
   Registered_Handler_Tail : R_Link := null;
 
   Access_Hold : Server_Task_Access;
   --  variable used to allocate Server_Task using "new"
 
   -----------------------
   -- Local Subprograms --
   -----------------------
 
   function Is_Registered (Handler : Parameterless_Handler) return Boolean;
   --  See if the Handler has been "pragma"ed using Interrupt_Handler.
   --  Always consider a null handler as registered.
 
   --------------------------------
   -- Register_Interrupt_Handler --
   --------------------------------
 
   procedure Register_Interrupt_Handler (Handler_Addr : System.Address) is
      New_Node_Ptr : R_Link;
 
   begin
      --  This routine registers the Handler as usable for Dynamic
      --  Interrupt Handler. Routines attaching and detaching Handler
      --  dynamically should first consult if the Handler is registered.
      --  A Program Error should be raised if it is not registered.
 
      --  The pragma Interrupt_Handler can only appear in the library
      --  level PO definition and instantiation. Therefore, we do not need
      --  to implement Unregistering operation. Neither we need to
      --  protect the queue structure using a Lock.
 
      pragma Assert (Handler_Addr /= System.Null_Address);
 
      New_Node_Ptr := new Registered_Handler;
      New_Node_Ptr.H := Handler_Addr;
 
      if Registered_Handler_Head = null then
         Registered_Handler_Head := New_Node_Ptr;
         Registered_Handler_Tail := New_Node_Ptr;
 
      else
         Registered_Handler_Tail.Next := New_Node_Ptr;
         Registered_Handler_Tail := New_Node_Ptr;
      end if;
   end Register_Interrupt_Handler;
 
   -------------------
   -- Is_Registered --
   -------------------
 
   function Is_Registered (Handler : Parameterless_Handler) return Boolean is
      type Fat_Ptr is record
         Object_Addr  : System.Address;
         Handler_Addr : System.Address;
      end record;
 
      function To_Fat_Ptr is new Ada.Unchecked_Conversion
        (Parameterless_Handler, Fat_Ptr);
 
      Ptr : R_Link;
      Fat : Fat_Ptr;
 
   begin
      if Handler = null then
         return True;
      end if;
 
      Fat := To_Fat_Ptr (Handler);
 
      Ptr := Registered_Handler_Head;
 
      while Ptr /= null loop
         if Ptr.H = Fat.Handler_Addr then
            return True;
         end if;
 
         Ptr := Ptr.Next;
      end loop;
 
      return False;
   end Is_Registered;
 
   -----------------
   -- Is_Reserved --
   -----------------
 
   function Is_Reserved (Interrupt : Interrupt_ID) return Boolean is
   begin
      return IMNG.Reserve (IMNG.Interrupt_ID (Interrupt));
   end Is_Reserved;
 
   -----------------------
   -- Is_Entry_Attached --
   -----------------------
 
   function Is_Entry_Attached (Interrupt : Interrupt_ID) return Boolean is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      return User_Entry (Interrupt).T /= Null_Task;
   end Is_Entry_Attached;
 
   -------------------------
   -- Is_Handler_Attached --
   -------------------------
 
   function Is_Handler_Attached (Interrupt : Interrupt_ID) return Boolean is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      return User_Handler (Interrupt).H /= null;
   end Is_Handler_Attached;
 
   ----------------
   -- Is_Blocked --
   ----------------
 
   function Is_Blocked (Interrupt : Interrupt_ID) return Boolean is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      return Blocked (Interrupt);
   end Is_Blocked;
 
   ----------------
   -- Is_Ignored --
   ----------------
 
   function Is_Ignored (Interrupt : Interrupt_ID) return Boolean is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      return Ignored (Interrupt);
   end Is_Ignored;
 
   ---------------------
   -- Current_Handler --
   ---------------------
 
   function Current_Handler
     (Interrupt : Interrupt_ID) return Parameterless_Handler
   is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      --  ??? Since Parameterless_Handler is not Atomic, the current
      --  implementation is wrong. We need a new service in Interrupt_Manager
      --  to ensure atomicity.
 
      return User_Handler (Interrupt).H;
   end Current_Handler;
 
   --------------------
   -- Attach_Handler --
   --------------------
 
   --  Calling this procedure with New_Handler = null and Static = True
   --  means we want to detach the current handler regardless of the
   --  previous handler's binding status (i.e. do not care if it is a
   --  dynamic or static handler).
 
   --  This option is needed so that during the finalization of a PO, we
   --  can detach handlers attached through pragma Attach_Handler.
 
   procedure Attach_Handler
     (New_Handler : Parameterless_Handler;
      Interrupt   : Interrupt_ID;
      Static      : Boolean := False) is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Attach_Handler (New_Handler, Interrupt, Static);
 
   end Attach_Handler;
 
   ----------------------
   -- Exchange_Handler --
   ----------------------
 
   --  Calling this procedure with New_Handler = null and Static = True means
   --  we want to detach the current handler regardless of the previous
   --  handler's binding status (i.e. do not care if it is dynamic or static
   --  handler).
 
   --  This option is needed so that during the finalization of a PO, we can
   --  detach handlers attached through pragma Attach_Handler.
 
   procedure Exchange_Handler
     (Old_Handler : out Parameterless_Handler;
      New_Handler : Parameterless_Handler;
      Interrupt   : Interrupt_ID;
      Static      : Boolean := False)
   is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Exchange_Handler
        (Old_Handler, New_Handler, Interrupt, Static);
 
   end Exchange_Handler;
 
   --------------------
   -- Detach_Handler --
   --------------------
 
   --  Calling this procedure with Static = True means we want to Detach the
   --  current handler regardless of the previous handler's binding status
   --  (i.e. do not care if it is a dynamic or static handler).
 
   --  This option is needed so that during the finalization of a PO, we can
   --  detach handlers attached through pragma Attach_Handler.
 
   procedure Detach_Handler
     (Interrupt : Interrupt_ID;
      Static    : Boolean := False)
   is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Detach_Handler (Interrupt, Static);
   end Detach_Handler;
 
   ---------------
   -- Reference --
   ---------------
 
   function Reference (Interrupt : Interrupt_ID) return System.Address is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      return Storage_Elements.To_Address
        (Storage_Elements.Integer_Address (Interrupt));
   end Reference;
 
   -----------------------------
   -- Bind_Interrupt_To_Entry --
   -----------------------------
 
   --  This procedure raises a Program_Error if it tries to
   --  bind an interrupt to which an Entry or a Procedure is
   --  already bound.
 
   procedure Bind_Interrupt_To_Entry
     (T       : Task_Id;
      E       : Task_Entry_Index;
      Int_Ref : System.Address)
   is
      Interrupt : constant Interrupt_ID :=
        Interrupt_ID (Storage_Elements.To_Integer (Int_Ref));
 
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Bind_Interrupt_To_Entry (T, E, Interrupt);
 
   end Bind_Interrupt_To_Entry;
 
   ------------------------------
   -- Detach_Interrupt_Entries --
   ------------------------------
 
   procedure Detach_Interrupt_Entries (T : Task_Id) is
   begin
      Interrupt_Manager.Detach_Interrupt_Entries (T);
   end Detach_Interrupt_Entries;
 
   ---------------------
   -- Block_Interrupt --
   ---------------------
 
   procedure Block_Interrupt (Interrupt : Interrupt_ID) is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Block_Interrupt (Interrupt);
   end Block_Interrupt;
 
   -----------------------
   -- Unblock_Interrupt --
   -----------------------
 
   procedure Unblock_Interrupt (Interrupt : Interrupt_ID) is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Unblock_Interrupt (Interrupt);
   end Unblock_Interrupt;
 
   ------------------
   -- Unblocked_By --
   ------------------
 
   function Unblocked_By
     (Interrupt : Interrupt_ID) return System.Tasking.Task_Id is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      return Last_Unblocker (Interrupt);
   end Unblocked_By;
 
   ----------------------
   -- Ignore_Interrupt --
   ----------------------
 
   procedure Ignore_Interrupt (Interrupt : Interrupt_ID) is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Ignore_Interrupt (Interrupt);
   end Ignore_Interrupt;
 
   ------------------------
   -- Unignore_Interrupt --
   ------------------------
 
   procedure Unignore_Interrupt (Interrupt : Interrupt_ID) is
   begin
      if Is_Reserved (Interrupt) then
         raise Program_Error with
           "Interrupt" & Interrupt_ID'Image (Interrupt) & " is reserved";
      end if;
 
      Interrupt_Manager.Unignore_Interrupt (Interrupt);
   end Unignore_Interrupt;
 
   -----------------------
   -- Interrupt_Manager --
   -----------------------
 
   task body Interrupt_Manager is
 
      --------------------
      -- Local Routines --
      --------------------
 
      procedure Unprotected_Exchange_Handler
        (Old_Handler : out Parameterless_Handler;
         New_Handler : Parameterless_Handler;
         Interrupt   : Interrupt_ID;
         Static      : Boolean;
         Restoration : Boolean := False);
 
      procedure Unprotected_Detach_Handler
        (Interrupt : Interrupt_ID;
         Static    : Boolean);
 
      ----------------------------------
      -- Unprotected_Exchange_Handler --
      ----------------------------------
 
      procedure Unprotected_Exchange_Handler
        (Old_Handler : out Parameterless_Handler;
         New_Handler : Parameterless_Handler;
         Interrupt   : Interrupt_ID;
         Static      : Boolean;
         Restoration : Boolean := False)
      is
      begin
         if User_Entry (Interrupt).T /= Null_Task then
 
            --  In case we have an Interrupt Entry already installed.
            --  raise a program error. (propagate it to the caller).
 
            raise Program_Error with "An interrupt is already installed";
         end if;
 
         --  Note: A null handler with Static=True will pass the following
         --  check. That is the case when we want to Detach a handler
         --  regardless of the Static status of the current_Handler. We don't
         --  check anything if Restoration is True, since we may be detaching
         --  a static handler to restore a dynamic one.
 
         if not Restoration and then not Static
 
            --  Tries to overwrite a static Interrupt Handler with a
            --  dynamic Handler
 
           and then (User_Handler (Interrupt).Static
 
                        --  The new handler is not specified as an
                        --  Interrupt Handler by a pragma.
 
                        or else not Is_Registered (New_Handler))
         then
            raise Program_Error with
              "Trying to overwrite a static Interrupt Handler with a " &
              "dynamic Handler";
         end if;
 
         --  The interrupt should no longer be ignored if it was ever ignored
 
         Ignored (Interrupt) := False;
 
         --  Save the old handler
 
         Old_Handler := User_Handler (Interrupt).H;
 
         --  The new handler
 
         User_Handler (Interrupt).H := New_Handler;
 
         if New_Handler = null then
 
            --  The null handler means we are detaching the handler
 
            User_Handler (Interrupt).Static := False;
 
         else
            User_Handler (Interrupt).Static := Static;
         end if;
 
         --  Invoke a corresponding Server_Task if not yet created.
         --  Place Task_Id info in Server_ID array.
 
         if Server_ID (Interrupt) = Null_Task then
            Access_Hold := new Server_Task (Interrupt);
            Server_ID (Interrupt) := To_System (Access_Hold.all'Identity);
         else
            POP.Wakeup (Server_ID (Interrupt), Interrupt_Server_Idle_Sleep);
         end if;
 
      end Unprotected_Exchange_Handler;
 
      --------------------------------
      -- Unprotected_Detach_Handler --
      --------------------------------
 
      procedure Unprotected_Detach_Handler
        (Interrupt   : Interrupt_ID;
         Static      : Boolean)
      is
      begin
         if User_Entry (Interrupt).T /= Null_Task then
 
            --  In case we have an Interrupt Entry installed.
            --  raise a program error. (propagate it to the caller).
 
            raise Program_Error with
              "An interrupt entry is already installed";
         end if;
 
         --  Note : Static = True will pass the following check. That is the
         --  case when we want to detach a handler regardless of the static
         --  status of the current_Handler.
 
         if not Static and then User_Handler (Interrupt).Static then
            --  Tries to detach a static Interrupt Handler.
            --  raise a program error.
 
            raise Program_Error with
              "Trying to detach a static Interrupt Handler";
         end if;
 
         --  The interrupt should no longer be ignored if
         --  it was ever ignored.
 
         Ignored (Interrupt) := False;
 
         --  The new handler
 
         User_Handler (Interrupt).H := null;
         User_Handler (Interrupt).Static := False;
         IMOP.Interrupt_Self_Process (IMNG.Interrupt_ID (Interrupt));
 
      end Unprotected_Detach_Handler;
 
   --  Start of processing for Interrupt_Manager
 
   begin
      --  By making this task independent of master, when the process
      --  goes away, the Interrupt_Manager will terminate gracefully.
 
      System.Tasking.Utilities.Make_Independent;
 
      --  Environment task gets its own interrupt mask, saves it,
      --  and then masks all interrupts except the Keep_Unmasked set.
 
      --  During rendezvous, the Interrupt_Manager receives the old
      --  interrupt mask of the environment task, and sets its own
      --  interrupt mask to that value.
 
      --  The environment task will call the entry of Interrupt_Manager some
      --  during elaboration of the body of this package.
 
      accept Initialize (Mask : IMNG.Interrupt_Mask) do
         pragma Warnings (Off, Mask);
         null;
      end Initialize;
 
      --  Note: All tasks in RTS will have all the Reserve Interrupts
      --  being masked (except the Interrupt_Manager) and Keep_Unmasked
      --  unmasked when created.
 
      --  Abort_Task_Interrupt is one of the Interrupt unmasked
      --  in all tasks. We mask the Interrupt in this particular task
      --  so that "sigwait" is possible to catch an explicitly sent
      --  Abort_Task_Interrupt from the Server_Tasks.
 
      --  This sigwaiting is needed so that we make sure a Server_Task is
      --  out of its own sigwait state. This extra synchronization is
      --  necessary to prevent following scenarios.
 
      --   1) Interrupt_Manager sends an Abort_Task_Interrupt to the
      --      Server_Task then changes its own interrupt mask (OS level).
      --      If an interrupt (corresponding to the Server_Task) arrives
      --      in the mean time we have the Interrupt_Manager unmasked and
      --      the Server_Task waiting on sigwait.
 
      --   2) For unbinding handler, we install a default action in the
      --      Interrupt_Manager. POSIX.1c states that the result of using
      --      "sigwait" and "sigaction" simultaneously on the same interrupt
      --      is undefined. Therefore, we need to be informed from the
      --      Server_Task of the fact that the Server_Task is out of its
      --      sigwait stage.
 
      loop
         --  A block is needed to absorb Program_Error exception
 
         declare
            Old_Handler : Parameterless_Handler;
         begin
            select
 
            accept Attach_Handler
               (New_Handler : Parameterless_Handler;
                Interrupt   : Interrupt_ID;
                Static      : Boolean;
                Restoration : Boolean := False)
            do
               Unprotected_Exchange_Handler
                 (Old_Handler, New_Handler, Interrupt, Static, Restoration);
            end Attach_Handler;
 
            or accept Exchange_Handler
               (Old_Handler : out Parameterless_Handler;
                New_Handler : Parameterless_Handler;
                Interrupt   : Interrupt_ID;
                Static      : Boolean)
            do
               Unprotected_Exchange_Handler
                 (Old_Handler, New_Handler, Interrupt, Static);
            end Exchange_Handler;
 
            or accept Detach_Handler
               (Interrupt   : Interrupt_ID;
                Static      : Boolean)
            do
               Unprotected_Detach_Handler (Interrupt, Static);
            end Detach_Handler;
 
            or accept Bind_Interrupt_To_Entry
              (T       : Task_Id;
               E       : Task_Entry_Index;
               Interrupt : Interrupt_ID)
            do
               --  if there is a binding already (either a procedure or an
               --  entry), raise Program_Error (propagate it to the caller).
 
               if User_Handler (Interrupt).H /= null
                 or else User_Entry (Interrupt).T /= Null_Task
               then
                  raise Program_Error with
                    "A binding for this interrupt is already present";
               end if;
 
               --  The interrupt should no longer be ignored if
               --  it was ever ignored.
 
               Ignored (Interrupt) := False;
               User_Entry (Interrupt) := Entry_Assoc'(T => T, E => E);
 
               --  Indicate the attachment of Interrupt Entry in ATCB.
               --  This is need so that when an Interrupt Entry task
               --  terminates the binding can be cleaned.
               --  The call to unbinding must be
               --  make by the task before it terminates.
 
               T.Interrupt_Entry := True;
 
               --  Invoke a corresponding Server_Task if not yet created.
               --  Place Task_Id info in Server_ID array.
 
               if Server_ID (Interrupt) = Null_Task then
 
                  Access_Hold := new Server_Task (Interrupt);
                  Server_ID (Interrupt) :=
                    To_System (Access_Hold.all'Identity);
               else
                  POP.Wakeup (Server_ID (Interrupt),
                              Interrupt_Server_Idle_Sleep);
               end if;
            end Bind_Interrupt_To_Entry;
 
            or accept Detach_Interrupt_Entries (T : Task_Id)
            do
               for J in Interrupt_ID'Range loop
                  if not Is_Reserved (J) then
                     if User_Entry (J).T = T then
 
                        --  The interrupt should no longer be ignored if
                        --  it was ever ignored.
 
                        Ignored (J) := False;
                        User_Entry (J) :=
                          Entry_Assoc'(T => Null_Task, E => Null_Task_Entry);
                        IMOP.Interrupt_Self_Process (IMNG.Interrupt_ID (J));
                     end if;
                  end if;
               end loop;
 
               --  Indicate in ATCB that no Interrupt Entries are attached
 
               T.Interrupt_Entry := False;
            end Detach_Interrupt_Entries;
 
            or accept Block_Interrupt (Interrupt : Interrupt_ID) do
               pragma Warnings (Off, Interrupt);
               raise Program_Error;
            end Block_Interrupt;
 
            or accept Unblock_Interrupt (Interrupt : Interrupt_ID) do
               pragma Warnings (Off, Interrupt);
               raise Program_Error;
            end Unblock_Interrupt;
 
            or accept Ignore_Interrupt (Interrupt : Interrupt_ID) do
               pragma Warnings (Off, Interrupt);
               raise Program_Error;
            end Ignore_Interrupt;
 
            or accept Unignore_Interrupt (Interrupt : Interrupt_ID) do
               pragma Warnings (Off, Interrupt);
               raise Program_Error;
            end Unignore_Interrupt;
 
            end select;
 
         exception
            --  If there is a program error we just want to propagate it
            --  to the caller and do not want to stop this task.
 
            when Program_Error =>
               null;
 
            when others =>
               pragma Assert (False);
               null;
         end;
      end loop;
   end Interrupt_Manager;
 
   -----------------
   -- Server_Task --
   -----------------
 
   task body Server_Task is
      Self_ID         : constant Task_Id := Self;
      Tmp_Handler     : Parameterless_Handler;
      Tmp_ID          : Task_Id;
      Tmp_Entry_Index : Task_Entry_Index;
      Intwait_Mask    : aliased IMNG.Interrupt_Mask;
 
   begin
      --  By making this task independent of master, when the process
      --  goes away, the Server_Task will terminate gracefully.
 
      System.Tasking.Utilities.Make_Independent;
 
      --  Install default action in system level
 
      IMOP.Install_Default_Action (IMNG.Interrupt_ID (Interrupt));
 
      --  Set up the mask (also clears the event flag)
 
      IMOP.Empty_Interrupt_Mask (Intwait_Mask'Access);
      IMOP.Add_To_Interrupt_Mask
        (Intwait_Mask'Access, IMNG.Interrupt_ID (Interrupt));
 
      --  Remember the Interrupt_ID for Abort_Task
 
      PIO.Set_Interrupt_ID (IMNG.Interrupt_ID (Interrupt), Self_ID);
 
      --  Note: All tasks in RTS will have all the Reserve Interrupts
      --  being masked (except the Interrupt_Manager) and Keep_Unmasked
      --  unmasked when created.
 
      loop
         System.Tasking.Initialization.Defer_Abort (Self_ID);
 
         --  A Handler or an Entry is installed. At this point all tasks
         --  mask for the Interrupt is masked. Catch the Interrupt using
         --  sigwait.
 
         --  This task may wake up from sigwait by receiving an interrupt
         --  (Abort_Task_Interrupt) from the Interrupt_Manager for unbinding
         --  a Procedure Handler or an Entry. Or it could be a wake up
         --  from status change (Unblocked -> Blocked). If that is not
         --  the case, we should execute the attached Procedure or Entry.
 
         if Single_Lock then
            POP.Lock_RTS;
         end if;
 
         POP.Write_Lock (Self_ID);
 
         if User_Handler (Interrupt).H = null
           and then User_Entry (Interrupt).T = Null_Task
         then
            --  No Interrupt binding. If there is an interrupt,
            --  Interrupt_Manager will take default action.
 
            Self_ID.Common.State := Interrupt_Server_Idle_Sleep;
            POP.Sleep (Self_ID, Interrupt_Server_Idle_Sleep);
            Self_ID.Common.State := Runnable;
 
         else
            Self_ID.Common.State := Interrupt_Server_Blocked_On_Event_Flag;
            Self_ID.Common.State := Runnable;
 
            if not (Self_ID.Deferral_Level = 0
                    and then Self_ID.Pending_ATC_Level
                             < Self_ID.ATC_Nesting_Level)
            then
               if User_Handler (Interrupt).H /= null then
                  Tmp_Handler := User_Handler (Interrupt).H;
 
                  --  RTS calls should not be made with self being locked
 
                  POP.Unlock (Self_ID);
 
                  if Single_Lock then
                     POP.Unlock_RTS;
                  end if;
 
                  Tmp_Handler.all;
 
                  if Single_Lock then
                     POP.Lock_RTS;
                  end if;
 
                  POP.Write_Lock (Self_ID);
 
               elsif User_Entry (Interrupt).T /= Null_Task then
                  Tmp_ID := User_Entry (Interrupt).T;
                  Tmp_Entry_Index := User_Entry (Interrupt).E;
 
                  --  RTS calls should not be made with self being locked
 
                  POP.Unlock (Self_ID);
 
                  if Single_Lock then
                     POP.Unlock_RTS;
                  end if;
 
                  System.Tasking.Rendezvous.Call_Simple
                    (Tmp_ID, Tmp_Entry_Index, System.Null_Address);
 
                  if Single_Lock then
                     POP.Lock_RTS;
                  end if;
 
                  POP.Write_Lock (Self_ID);
               end if;
            end if;
         end if;
 
         POP.Unlock (Self_ID);
 
         if Single_Lock then
            POP.Unlock_RTS;
         end if;
 
         System.Tasking.Initialization.Undefer_Abort (Self_ID);
 
         --  Undefer abort here to allow a window for this task
         --  to be aborted  at the time of system shutdown.
      end loop;
   end Server_Task;
 
   -------------------------------------
   -- Has_Interrupt_Or_Attach_Handler --
   -------------------------------------
 
   function Has_Interrupt_Or_Attach_Handler
     (Object : access Dynamic_Interrupt_Protection) return Boolean
   is
      pragma Warnings (Off, Object);
 
   begin
      return True;
   end Has_Interrupt_Or_Attach_Handler;
 
   --------------
   -- Finalize --
   --------------
 
   procedure Finalize (Object : in out Static_Interrupt_Protection) is
   begin
      --  ??? loop to be executed only when we're not doing library level
      --  finalization, since in this case all interrupt tasks are gone.
 
      if not Interrupt_Manager'Terminated then
         for N in reverse Object.Previous_Handlers'Range loop
            Interrupt_Manager.Attach_Handler
              (New_Handler => Object.Previous_Handlers (N).Handler,
               Interrupt   => Object.Previous_Handlers (N).Interrupt,
               Static      => Object.Previous_Handlers (N).Static,
               Restoration => True);
         end loop;
      end if;
 
      Tasking.Protected_Objects.Entries.Finalize
        (Tasking.Protected_Objects.Entries.Protection_Entries (Object));
   end Finalize;
 
   -------------------------------------
   -- Has_Interrupt_Or_Attach_Handler --
   -------------------------------------
 
   function Has_Interrupt_Or_Attach_Handler
     (Object : access Static_Interrupt_Protection) return Boolean
   is
      pragma Warnings (Off, Object);
   begin
      return True;
   end Has_Interrupt_Or_Attach_Handler;
 
   ----------------------
   -- Install_Handlers --
   ----------------------
 
   procedure Install_Handlers
     (Object       : access Static_Interrupt_Protection;
      New_Handlers : New_Handler_Array)
   is
   begin
      for N in New_Handlers'Range loop
 
         --  We need a lock around this ???
 
         Object.Previous_Handlers (N).Interrupt := New_Handlers (N).Interrupt;
         Object.Previous_Handlers (N).Static    := User_Handler
           (New_Handlers (N).Interrupt).Static;
 
         --  We call Exchange_Handler and not directly Interrupt_Manager.
         --  Exchange_Handler so we get the Is_Reserved check.
 
         Exchange_Handler
           (Old_Handler => Object.Previous_Handlers (N).Handler,
            New_Handler => New_Handlers (N).Handler,
            Interrupt   => New_Handlers (N).Interrupt,
            Static      => True);
      end loop;
   end Install_Handlers;
 
   ---------------------------------
   -- Install_Restricted_Handlers --
   ---------------------------------
 
   procedure Install_Restricted_Handlers (Handlers : New_Handler_Array) is
   begin
      for N in Handlers'Range loop
         Attach_Handler (Handlers (N).Handler, Handlers (N).Interrupt, True);
      end loop;
   end Install_Restricted_Handlers;
 
--  Elaboration code for package System.Interrupts
 
begin
   --  Get Interrupt_Manager's ID so that Abort_Interrupt can be sent
 
   Interrupt_Manager_ID := To_System (Interrupt_Manager'Identity);
 
   --  During the elaboration of this package body we want RTS to inherit the
   --  interrupt mask from the Environment Task.
 
   --  The Environment Task should have gotten its mask from the enclosing
   --  process during the RTS start up. (See in s-inmaop.adb). Pass the
   --  Interrupt_Mask of the Environment task to the Interrupt_Manager.
 
   --  Note : At this point we know that all tasks (including RTS internal
   --  servers) are masked for non-reserved signals (see s-taprop.adb). Only
   --  the Interrupt_Manager will have masks set up differently inheriting the
   --  original Environment Task's mask.
 
   Interrupt_Manager.Initialize (IMOP.Environment_Mask);
end System.Interrupts;