URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [s-secsta.adb] - Rev 747
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S Y S T E M . S E C O N D A R Y _ S T A C K -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2011, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. -- -- -- -- As a special exception under Section 7 of GPL version 3, you are granted -- -- additional permissions described in the GCC Runtime Library Exception, -- -- version 3.1, as published by the Free Software Foundation. -- -- -- -- You should have received a copy of the GNU General Public License and -- -- a copy of the GCC Runtime Library Exception along with this program; -- -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -- -- <http://www.gnu.org/licenses/>. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ pragma Compiler_Unit; with System.Soft_Links; with System.Parameters; with Ada.Unchecked_Conversion; with Ada.Unchecked_Deallocation; package body System.Secondary_Stack is package SSL renames System.Soft_Links; use type SSE.Storage_Offset; use type System.Parameters.Size_Type; SS_Ratio_Dynamic : constant Boolean := Parameters.Sec_Stack_Percentage = Parameters.Dynamic; -- There are two entirely different implementations of the secondary -- stack mechanism in this unit, and this Boolean is used to select -- between them (at compile time, so the generated code will contain -- only the code for the desired variant). If SS_Ratio_Dynamic is -- True, then the secondary stack is dynamically allocated from the -- heap in a linked list of chunks. If SS_Ration_Dynamic is False, -- then the secondary stack is allocated statically by grabbing a -- section of the primary stack and using it for this purpose. type Memory is array (SS_Ptr range <>) of SSE.Storage_Element; for Memory'Alignment use Standard'Maximum_Alignment; -- This is the type used for actual allocation of secondary stack -- areas. We require maximum alignment for all such allocations. --------------------------------------------------------------- -- Data Structures for Dynamically Allocated Secondary Stack -- --------------------------------------------------------------- -- The following is a diagram of the data structures used for the -- case of a dynamically allocated secondary stack, where the stack -- is allocated as a linked list of chunks allocated from the heap. -- +------------------+ -- | Next | -- +------------------+ -- | | Last (200) -- | | -- | | -- | | -- | | -- | | -- | | First (101) -- +------------------+ -- +----------> | | | -- | +----------+-------+ -- | | | -- | ^ V -- | | | -- | +-------+----------+ -- | | | | -- | +------------------+ -- | | | Last (100) -- | | C | -- | | H | -- +-----------------+ | +-------->| U | -- | Current_Chunk -|--+ | | N | -- +-----------------+ | | K | -- | Top -|-----+ | | First (1) -- +-----------------+ +------------------+ -- | Default_Size | | Prev | -- +-----------------+ +------------------+ -- type Chunk_Id (First, Last : SS_Ptr); type Chunk_Ptr is access all Chunk_Id; type Chunk_Id (First, Last : SS_Ptr) is record Prev, Next : Chunk_Ptr; Mem : Memory (First .. Last); end record; type Stack_Id is record Top : SS_Ptr; Default_Size : SSE.Storage_Count; Current_Chunk : Chunk_Ptr; end record; type Stack_Ptr is access Stack_Id; -- Pointer to record used to represent a dynamically allocated secondary -- stack descriptor for a secondary stack chunk. procedure Free is new Ada.Unchecked_Deallocation (Chunk_Id, Chunk_Ptr); -- Free a dynamically allocated chunk function To_Stack_Ptr is new Ada.Unchecked_Conversion (Address, Stack_Ptr); function To_Addr is new Ada.Unchecked_Conversion (Stack_Ptr, Address); -- Convert to and from address stored in task data structures -------------------------------------------------------------- -- Data Structures for Statically Allocated Secondary Stack -- -------------------------------------------------------------- -- For the static case, the secondary stack is a single contiguous -- chunk of storage, carved out of the primary stack, and represented -- by the following data structure type Fixed_Stack_Id is record Top : SS_Ptr; -- Index of next available location in Mem. This is initialized to -- 0, and then incremented on Allocate, and Decremented on Release. Last : SS_Ptr; -- Length of usable Mem array, which is thus the index past the -- last available location in Mem. Mem (Last-1) can be used. This -- is used to check that the stack does not overflow. Max : SS_Ptr; -- Maximum value of Top. Initialized to 0, and then may be incremented -- on Allocate, but is never Decremented. The last used location will -- be Mem (Max - 1), so Max is the maximum count of used stack space. Mem : Memory (0 .. 0); -- This is the area that is actually used for the secondary stack. -- Note that the upper bound is a dummy value properly defined by -- the value of Last. We never actually allocate objects of type -- Fixed_Stack_Id, so the bounds declared here do not matter. end record; Dummy_Fixed_Stack : Fixed_Stack_Id; pragma Warnings (Off, Dummy_Fixed_Stack); -- Well it is not quite true that we never allocate an object of the -- type. This dummy object is allocated for the purpose of getting the -- offset of the Mem field via the 'Position attribute (such a nuisance -- that we cannot apply this to a field of a type!) type Fixed_Stack_Ptr is access Fixed_Stack_Id; -- Pointer to record used to describe statically allocated sec stack function To_Fixed_Stack_Ptr is new Ada.Unchecked_Conversion (Address, Fixed_Stack_Ptr); -- Convert from address stored in task data structures -------------- -- Allocate -- -------------- procedure SS_Allocate (Addr : out Address; Storage_Size : SSE.Storage_Count) is Max_Align : constant SS_Ptr := SS_Ptr (Standard'Maximum_Alignment); Max_Size : constant SS_Ptr := ((SS_Ptr (Storage_Size) + Max_Align - 1) / Max_Align) * Max_Align; begin -- Case of fixed allocation secondary stack if not SS_Ratio_Dynamic then declare Fixed_Stack : constant Fixed_Stack_Ptr := To_Fixed_Stack_Ptr (SSL.Get_Sec_Stack_Addr.all); begin -- Check if max stack usage is increasing if Fixed_Stack.Top + Max_Size > Fixed_Stack.Max then -- If so, check if max size is exceeded if Fixed_Stack.Top + Max_Size > Fixed_Stack.Last then raise Storage_Error; end if; -- Record new max usage Fixed_Stack.Max := Fixed_Stack.Top + Max_Size; end if; -- Set resulting address and update top of stack pointer Addr := Fixed_Stack.Mem (Fixed_Stack.Top)'Address; Fixed_Stack.Top := Fixed_Stack.Top + Max_Size; end; -- Case of dynamically allocated secondary stack else declare Stack : constant Stack_Ptr := To_Stack_Ptr (SSL.Get_Sec_Stack_Addr.all); Chunk : Chunk_Ptr; To_Be_Released_Chunk : Chunk_Ptr; begin Chunk := Stack.Current_Chunk; -- The Current_Chunk may not be the good one if a lot of release -- operations have taken place. So go down the stack if necessary while Chunk.First > Stack.Top loop Chunk := Chunk.Prev; end loop; -- Find out if the available memory in the current chunk is -- sufficient, if not, go to the next one and eventually create -- the necessary room. while Chunk.Last - Stack.Top + 1 < Max_Size loop if Chunk.Next /= null then -- Release unused non-first empty chunk if Chunk.Prev /= null and then Chunk.First = Stack.Top then To_Be_Released_Chunk := Chunk; Chunk := Chunk.Prev; Chunk.Next := To_Be_Released_Chunk.Next; To_Be_Released_Chunk.Next.Prev := Chunk; Free (To_Be_Released_Chunk); end if; -- Create new chunk of default size unless it is not -- sufficient to satisfy the current request. elsif SSE.Storage_Count (Max_Size) <= Stack.Default_Size then Chunk.Next := new Chunk_Id (First => Chunk.Last + 1, Last => Chunk.Last + SS_Ptr (Stack.Default_Size)); Chunk.Next.Prev := Chunk; -- Otherwise create new chunk of requested size else Chunk.Next := new Chunk_Id (First => Chunk.Last + 1, Last => Chunk.Last + Max_Size); Chunk.Next.Prev := Chunk; end if; Chunk := Chunk.Next; Stack.Top := Chunk.First; end loop; -- Resulting address is the address pointed by Stack.Top Addr := Chunk.Mem (Stack.Top)'Address; Stack.Top := Stack.Top + Max_Size; Stack.Current_Chunk := Chunk; end; end if; end SS_Allocate; ------------- -- SS_Free -- ------------- procedure SS_Free (Stk : in out Address) is begin -- Case of statically allocated secondary stack, nothing to free if not SS_Ratio_Dynamic then return; -- Case of dynamically allocated secondary stack else declare Stack : Stack_Ptr := To_Stack_Ptr (Stk); Chunk : Chunk_Ptr; procedure Free is new Ada.Unchecked_Deallocation (Stack_Id, Stack_Ptr); begin Chunk := Stack.Current_Chunk; while Chunk.Prev /= null loop Chunk := Chunk.Prev; end loop; while Chunk.Next /= null loop Chunk := Chunk.Next; Free (Chunk.Prev); end loop; Free (Chunk); Free (Stack); Stk := Null_Address; end; end if; end SS_Free; ---------------- -- SS_Get_Max -- ---------------- function SS_Get_Max return Long_Long_Integer is begin if SS_Ratio_Dynamic then return -1; else declare Fixed_Stack : constant Fixed_Stack_Ptr := To_Fixed_Stack_Ptr (SSL.Get_Sec_Stack_Addr.all); begin return Long_Long_Integer (Fixed_Stack.Max); end; end if; end SS_Get_Max; ------------- -- SS_Info -- ------------- procedure SS_Info is begin Put_Line ("Secondary Stack information:"); -- Case of fixed secondary stack if not SS_Ratio_Dynamic then declare Fixed_Stack : constant Fixed_Stack_Ptr := To_Fixed_Stack_Ptr (SSL.Get_Sec_Stack_Addr.all); begin Put_Line ( " Total size : " & SS_Ptr'Image (Fixed_Stack.Last) & " bytes"); Put_Line ( " Current allocated space : " & SS_Ptr'Image (Fixed_Stack.Top - 1) & " bytes"); end; -- Case of dynamically allocated secondary stack else declare Stack : constant Stack_Ptr := To_Stack_Ptr (SSL.Get_Sec_Stack_Addr.all); Nb_Chunks : Integer := 1; Chunk : Chunk_Ptr := Stack.Current_Chunk; begin while Chunk.Prev /= null loop Chunk := Chunk.Prev; end loop; while Chunk.Next /= null loop Nb_Chunks := Nb_Chunks + 1; Chunk := Chunk.Next; end loop; -- Current Chunk information Put_Line ( " Total size : " & SS_Ptr'Image (Chunk.Last) & " bytes"); Put_Line ( " Current allocated space : " & SS_Ptr'Image (Stack.Top - 1) & " bytes"); Put_Line ( " Number of Chunks : " & Integer'Image (Nb_Chunks)); Put_Line ( " Default size of Chunks : " & SSE.Storage_Count'Image (Stack.Default_Size)); end; end if; end SS_Info; ------------- -- SS_Init -- ------------- procedure SS_Init (Stk : in out Address; Size : Natural := Default_Secondary_Stack_Size) is begin -- Case of fixed size secondary stack if not SS_Ratio_Dynamic then declare Fixed_Stack : constant Fixed_Stack_Ptr := To_Fixed_Stack_Ptr (Stk); begin Fixed_Stack.Top := 0; Fixed_Stack.Max := 0; if Size < Dummy_Fixed_Stack.Mem'Position then Fixed_Stack.Last := 0; else Fixed_Stack.Last := SS_Ptr (Size) - Dummy_Fixed_Stack.Mem'Position; end if; end; -- Case of dynamically allocated secondary stack else declare Stack : Stack_Ptr; begin Stack := new Stack_Id; Stack.Current_Chunk := new Chunk_Id (1, SS_Ptr (Size)); Stack.Top := 1; Stack.Default_Size := SSE.Storage_Count (Size); Stk := To_Addr (Stack); end; end if; end SS_Init; ------------- -- SS_Mark -- ------------- function SS_Mark return Mark_Id is Sstk : constant System.Address := SSL.Get_Sec_Stack_Addr.all; begin if SS_Ratio_Dynamic then return (Sstk => Sstk, Sptr => To_Stack_Ptr (Sstk).Top); else return (Sstk => Sstk, Sptr => To_Fixed_Stack_Ptr (Sstk).Top); end if; end SS_Mark; ---------------- -- SS_Release -- ---------------- procedure SS_Release (M : Mark_Id) is begin if SS_Ratio_Dynamic then To_Stack_Ptr (M.Sstk).Top := M.Sptr; else To_Fixed_Stack_Ptr (M.Sstk).Top := M.Sptr; end if; end SS_Release; ------------------------- -- Package Elaboration -- ------------------------- -- Allocate a secondary stack for the main program to use -- We make sure that the stack has maximum alignment. Some systems require -- this (e.g. Sparc), and in any case it is a good idea for efficiency. Stack : aliased Stack_Id; for Stack'Alignment use Standard'Maximum_Alignment; Static_Secondary_Stack_Size : constant := 10 * 1024; -- Static_Secondary_Stack_Size must be static so that Chunk is allocated -- statically, and not via dynamic memory allocation. Chunk : aliased Chunk_Id (1, Static_Secondary_Stack_Size); for Chunk'Alignment use Standard'Maximum_Alignment; -- Default chunk used, unless gnatbind -D is specified with a value -- greater than Static_Secondary_Stack_Size begin declare Chunk_Address : Address; Chunk_Access : Chunk_Ptr; begin if Default_Secondary_Stack_Size <= Static_Secondary_Stack_Size then -- Normally we allocate the secondary stack for the main program -- statically, using the default secondary stack size. Chunk_Access := Chunk'Access; else -- Default_Secondary_Stack_Size was increased via gnatbind -D, so we -- need to allocate a chunk dynamically. Chunk_Access := new Chunk_Id (1, SS_Ptr (Default_Secondary_Stack_Size)); end if; if SS_Ratio_Dynamic then Stack.Top := 1; Stack.Current_Chunk := Chunk_Access; Stack.Default_Size := SSE.Storage_Offset (Default_Secondary_Stack_Size); System.Soft_Links.Set_Sec_Stack_Addr_NT (Stack'Address); else Chunk_Address := Chunk_Access.all'Address; SS_Init (Chunk_Address, Default_Secondary_Stack_Size); System.Soft_Links.Set_Sec_Stack_Addr_NT (Chunk_Address); end if; end; end System.Secondary_Stack;
Go to most recent revision | Compare with Previous | Blame | View Log