URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [scng.adb] - Rev 801
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S C N G -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2011, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Csets; use Csets; with Err_Vars; use Err_Vars; with Hostparm; use Hostparm; with Namet; use Namet; with Opt; use Opt; with Restrict; use Restrict; with Rident; use Rident; with Scans; use Scans; with Sinput; use Sinput; with Snames; use Snames; with Stringt; use Stringt; with Stylesw; use Stylesw; with Uintp; use Uintp; with Urealp; use Urealp; with Widechar; use Widechar; pragma Warnings (Off); -- This package is used also by gnatcoll with System.CRC32; with System.UTF_32; use System.UTF_32; with System.WCh_Con; use System.WCh_Con; pragma Warnings (On); package body Scng is use ASCII; -- Make control characters visible Special_Characters : array (Character) of Boolean := (others => False); -- For characters that are Special token, the value is True Comment_Is_Token : Boolean := False; -- True if comments are tokens End_Of_Line_Is_Token : Boolean := False; -- True if End_Of_Line is a token ----------------------- -- Local Subprograms -- ----------------------- procedure Accumulate_Token_Checksum; pragma Inline (Accumulate_Token_Checksum); -- Called after each numeric literal and identifier/keyword. For keywords, -- the token used is Tok_Identifier. This allows to detect additional -- spaces added in sources when using the builder switch -m. procedure Accumulate_Token_Checksum_GNAT_6_3; -- Used in place of Accumulate_Token_Checksum for GNAT versions 5.04 to -- 6.3, when Tok_Some was not included in Token_Type and the actual -- Token_Type was used for keywords. This procedure is never used in the -- compiler or gnatmake, only in gprbuild. procedure Accumulate_Token_Checksum_GNAT_5_03; -- Used in place of Accumulate_Token_Checksum for GNAT version 5.03, when -- Tok_Interface, Tok_Some, Tok_Synchronized and Tok_Overriding were not -- included in Token_Type and the actual Token_Type was used for keywords. -- This procedure is never used in the compiler or gnatmake, only in -- gprbuild. procedure Accumulate_Checksum (C : Character); pragma Inline (Accumulate_Checksum); -- This routine accumulates the checksum given character C. During the -- scanning of a source file, this routine is called with every character -- in the source, excluding blanks, and all control characters (except -- that ESC is included in the checksum). Upper case letters not in string -- literals are folded by the caller. See Sinput spec for the documentation -- of the checksum algorithm. Note: checksum values are only used if we -- generate code, so it is not necessary to worry about making the right -- sequence of calls in any error situation. procedure Accumulate_Checksum (C : Char_Code); pragma Inline (Accumulate_Checksum); -- This version is identical, except that the argument, C, is a character -- code value instead of a character. This is used when wide characters -- are scanned. We use the character code rather than the ASCII characters -- so that the checksum is independent of wide character encoding method. procedure Initialize_Checksum; pragma Inline (Initialize_Checksum); -- Initialize checksum value ------------------------- -- Accumulate_Checksum -- ------------------------- procedure Accumulate_Checksum (C : Character) is begin System.CRC32.Update (System.CRC32.CRC32 (Checksum), C); end Accumulate_Checksum; procedure Accumulate_Checksum (C : Char_Code) is begin if C > 16#FFFF# then Accumulate_Checksum (Character'Val (C / 2 ** 24)); Accumulate_Checksum (Character'Val ((C / 2 ** 16) mod 256)); Accumulate_Checksum (Character'Val ((C / 256) mod 256)); else Accumulate_Checksum (Character'Val (C / 256)); end if; Accumulate_Checksum (Character'Val (C mod 256)); end Accumulate_Checksum; ------------------------------- -- Accumulate_Token_Checksum -- ------------------------------- procedure Accumulate_Token_Checksum is begin System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token))); end Accumulate_Token_Checksum; ---------------------------------------- -- Accumulate_Token_Checksum_GNAT_6_3 -- ---------------------------------------- procedure Accumulate_Token_Checksum_GNAT_6_3 is begin -- Individual values of Token_Type are used, instead of subranges, so -- that additions or suppressions of enumerated values in type -- Token_Type are detected by the compiler. case Token is when Tok_Integer_Literal | Tok_Real_Literal | Tok_String_Literal | Tok_Char_Literal | Tok_Operator_Symbol | Tok_Identifier | Tok_Double_Asterisk | Tok_Ampersand | Tok_Minus | Tok_Plus | Tok_Asterisk | Tok_Mod | Tok_Rem | Tok_Slash | Tok_New | Tok_Abs | Tok_Others | Tok_Null | Tok_Dot | Tok_Apostrophe | Tok_Left_Paren | Tok_Delta | Tok_Digits | Tok_Range | Tok_Right_Paren | Tok_Comma | Tok_And | Tok_Or | Tok_Xor | Tok_Less | Tok_Equal | Tok_Greater | Tok_Not_Equal | Tok_Greater_Equal | Tok_Less_Equal | Tok_In | Tok_Not | Tok_Box | Tok_Colon_Equal | Tok_Colon | Tok_Greater_Greater | Tok_Abstract | Tok_Access | Tok_Aliased | Tok_All | Tok_Array | Tok_At | Tok_Body | Tok_Constant | Tok_Do | Tok_Is | Tok_Interface | Tok_Limited | Tok_Of | Tok_Out | Tok_Record | Tok_Renames | Tok_Reverse => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token))); when Tok_Some => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Tok_Identifier))); when Tok_Tagged | Tok_Then | Tok_Less_Less | Tok_Abort | Tok_Accept | Tok_Case | Tok_Delay | Tok_Else | Tok_Elsif | Tok_End | Tok_Exception | Tok_Exit | Tok_Goto | Tok_If | Tok_Pragma | Tok_Raise | Tok_Requeue | Tok_Return | Tok_Select | Tok_Terminate | Tok_Until | Tok_When | Tok_Begin | Tok_Declare | Tok_For | Tok_Loop | Tok_While | Tok_Entry | Tok_Protected | Tok_Task | Tok_Type | Tok_Subtype | Tok_Overriding | Tok_Synchronized | Tok_Use | Tok_Function | Tok_Generic | Tok_Package | Tok_Procedure | Tok_Private | Tok_With | Tok_Separate | Tok_EOF | Tok_Semicolon | Tok_Arrow | Tok_Vertical_Bar | Tok_Dot_Dot | Tok_Project | Tok_Extends | Tok_External | Tok_External_As_List | Tok_Comment | Tok_End_Of_Line | Tok_Special | Tok_SPARK_Hide | No_Token => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token_Type'Pred (Token)))); end case; end Accumulate_Token_Checksum_GNAT_6_3; ----------------------------------------- -- Accumulate_Token_Checksum_GNAT_5_03 -- ----------------------------------------- procedure Accumulate_Token_Checksum_GNAT_5_03 is begin -- Individual values of Token_Type are used, instead of subranges, so -- that additions or suppressions of enumerated values in type -- Token_Type are detected by the compiler. case Token is when Tok_Integer_Literal | Tok_Real_Literal | Tok_String_Literal | Tok_Char_Literal | Tok_Operator_Symbol | Tok_Identifier | Tok_Double_Asterisk | Tok_Ampersand | Tok_Minus | Tok_Plus | Tok_Asterisk | Tok_Mod | Tok_Rem | Tok_Slash | Tok_New | Tok_Abs | Tok_Others | Tok_Null | Tok_Dot | Tok_Apostrophe | Tok_Left_Paren | Tok_Delta | Tok_Digits | Tok_Range | Tok_Right_Paren | Tok_Comma | Tok_And | Tok_Or | Tok_Xor | Tok_Less | Tok_Equal | Tok_Greater | Tok_Not_Equal | Tok_Greater_Equal | Tok_Less_Equal | Tok_In | Tok_Not | Tok_Box | Tok_Colon_Equal | Tok_Colon | Tok_Greater_Greater | Tok_Abstract | Tok_Access | Tok_Aliased | Tok_All | Tok_Array | Tok_At | Tok_Body | Tok_Constant | Tok_Do | Tok_Is => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token))); when Tok_Interface | Tok_Some | Tok_Overriding | Tok_Synchronized => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Tok_Identifier))); when Tok_Limited | Tok_Of | Tok_Out | Tok_Record | Tok_Renames | Tok_Reverse => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token) - 1)); when Tok_Tagged | Tok_Then | Tok_Less_Less | Tok_Abort | Tok_Accept | Tok_Case | Tok_Delay | Tok_Else | Tok_Elsif | Tok_End | Tok_Exception | Tok_Exit | Tok_Goto | Tok_If | Tok_Pragma | Tok_Raise | Tok_Requeue | Tok_Return | Tok_Select | Tok_Terminate | Tok_Until | Tok_When | Tok_Begin | Tok_Declare | Tok_For | Tok_Loop | Tok_While | Tok_Entry | Tok_Protected | Tok_Task | Tok_Type | Tok_Subtype => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token) - 2)); when Tok_Use | Tok_Function | Tok_Generic | Tok_Package | Tok_Procedure | Tok_Private | Tok_With | Tok_Separate | Tok_EOF | Tok_Semicolon | Tok_Arrow | Tok_Vertical_Bar | Tok_Dot_Dot | Tok_Project | Tok_Extends | Tok_External | Tok_External_As_List | Tok_Comment | Tok_End_Of_Line | Tok_Special | Tok_SPARK_Hide | No_Token => System.CRC32.Update (System.CRC32.CRC32 (Checksum), Character'Val (Token_Type'Pos (Token) - 4)); end case; end Accumulate_Token_Checksum_GNAT_5_03; ---------------------------- -- Determine_Token_Casing -- ---------------------------- function Determine_Token_Casing return Casing_Type is begin return Determine_Casing (Source (Token_Ptr .. Scan_Ptr - 1)); end Determine_Token_Casing; ------------------------- -- Initialize_Checksum -- ------------------------- procedure Initialize_Checksum is begin System.CRC32.Initialize (System.CRC32.CRC32 (Checksum)); end Initialize_Checksum; ------------------------ -- Initialize_Scanner -- ------------------------ procedure Initialize_Scanner (Index : Source_File_Index) is begin -- Establish reserved words Scans.Initialize_Ada_Keywords; -- Initialize scan control variables Current_Source_File := Index; Source := Source_Text (Current_Source_File); Scan_Ptr := Source_First (Current_Source_File); Token := No_Token; Token_Ptr := Scan_Ptr; Current_Line_Start := Scan_Ptr; Token_Node := Empty; Token_Name := No_Name; Start_Column := Set_Start_Column; First_Non_Blank_Location := Scan_Ptr; Initialize_Checksum; Wide_Char_Byte_Count := 0; -- Do not call Scan, otherwise the License stuff does not work in Scn end Initialize_Scanner; ------------------------------ -- Reset_Special_Characters -- ------------------------------ procedure Reset_Special_Characters is begin Special_Characters := (others => False); end Reset_Special_Characters; ---------- -- Scan -- ---------- procedure Scan is Start_Of_Comment : Source_Ptr; -- Record start of comment position Underline_Found : Boolean; -- During scanning of an identifier, set to True if last character -- scanned was an underline or other punctuation character. This -- is used to flag the error of two underlines/punctuations in a -- row or ending an identifier with a underline/punctuation. Here -- punctuation means any UTF_32 character in the Unicode category -- Punctuation,Connector. Wptr : Source_Ptr; -- Used to remember start of last wide character scanned procedure Check_End_Of_Line; -- Called when end of line encountered. Checks that line is not too -- long, and that other style checks for the end of line are met. function Double_Char_Token (C : Character) return Boolean; -- This function is used for double character tokens like := or <>. It -- checks if the character following Source (Scan_Ptr) is C, and if so -- bumps Scan_Ptr past the pair of characters and returns True. A space -- between the two characters is also recognized with an appropriate -- error message being issued. If C is not present, False is returned. -- Note that Double_Char_Token can only be used for tokens defined in -- the Ada syntax (it's use for error cases like && is not appropriate -- since we do not want a junk message for a case like &-space-&). procedure Error_Illegal_Character; -- Give illegal character error, Scan_Ptr points to character. On -- return, Scan_Ptr is bumped past the illegal character. procedure Error_Illegal_Wide_Character; -- Give illegal wide character message. On return, Scan_Ptr is bumped -- past the illegal character, which may still leave us pointing to -- junk, not much we can do if the escape sequence is messed up! procedure Error_Long_Line; -- Signal error of excessively long line procedure Error_No_Double_Underline; -- Signal error of two underline or punctuation characters in a row. -- Called with Scan_Ptr pointing to second underline/punctuation char. procedure Nlit; -- This is the procedure for scanning out numeric literals. On entry, -- Scan_Ptr points to the digit that starts the numeric literal (the -- checksum for this character has not been accumulated yet). On return -- Scan_Ptr points past the last character of the numeric literal, Token -- and Token_Node are set appropriately, and the checksum is updated. procedure Slit; -- This is the procedure for scanning out string literals. On entry, -- Scan_Ptr points to the opening string quote (the checksum for this -- character has not been accumulated yet). On return Scan_Ptr points -- past the closing quote of the string literal, Token and Token_Node -- are set appropriately, and the checksum is updated. procedure Skip_Other_Format_Characters; -- Skips past any "other format" category characters at the current -- cursor location (does not skip past spaces or any other characters). function Start_Of_Wide_Character return Boolean; -- Returns True if the scan pointer is pointing to the start of a wide -- character sequence, does not modify the scan pointer in any case. ----------------------- -- Check_End_Of_Line -- ----------------------- procedure Check_End_Of_Line is Len : constant Int := Int (Scan_Ptr) - Int (Current_Line_Start) - Wide_Char_Byte_Count; begin if Style_Check then Style.Check_Line_Terminator (Len); end if; -- Deal with checking maximum line length if Style_Check and Style_Check_Max_Line_Length then Style.Check_Line_Max_Length (Len); -- If style checking is inactive, check maximum line length against -- standard value. elsif Len > Max_Line_Length then Error_Long_Line; end if; -- Now one more checking circuit. Normally we are only enforcing a -- limit of physical characters, with tabs counting as one character. -- But if after tab expansion we would have a total line length that -- exceeded 32766, that would really cause trouble, because column -- positions would exceed the maximum we allow for a column count. -- Note: the limit is 32766 rather than 32767, since we use a value -- of 32767 for special purposes (see Sinput). Now we really do not -- want to go messing with tabs in the normal case, so what we do is -- to check for a line that has more than 4096 physical characters. -- Any shorter line could not be a problem, even if it was all tabs. if Len >= 4096 then declare Col : Natural; Ptr : Source_Ptr; begin Col := 1; Ptr := Current_Line_Start; loop exit when Ptr = Scan_Ptr; if Source (Ptr) = ASCII.HT then Col := (Col - 1 + 8) / 8 * 8 + 1; else Col := Col + 1; end if; if Col > 32766 then Error_Msg ("this line is longer than 32766 characters", Current_Line_Start); raise Unrecoverable_Error; end if; Ptr := Ptr + 1; end loop; end; end if; -- Reset wide character byte count for next line Wide_Char_Byte_Count := 0; end Check_End_Of_Line; ----------------------- -- Double_Char_Token -- ----------------------- function Double_Char_Token (C : Character) return Boolean is begin if Source (Scan_Ptr + 1) = C then Accumulate_Checksum (C); Scan_Ptr := Scan_Ptr + 2; return True; elsif Source (Scan_Ptr + 1) = ' ' and then Source (Scan_Ptr + 2) = C then Scan_Ptr := Scan_Ptr + 1; Error_Msg_S -- CODEFIX ("no space allowed here"); Scan_Ptr := Scan_Ptr + 2; return True; else return False; end if; end Double_Char_Token; ----------------------------- -- Error_Illegal_Character -- ----------------------------- procedure Error_Illegal_Character is begin Error_Msg_S ("illegal character"); Scan_Ptr := Scan_Ptr + 1; end Error_Illegal_Character; ---------------------------------- -- Error_Illegal_Wide_Character -- ---------------------------------- procedure Error_Illegal_Wide_Character is begin Scan_Ptr := Scan_Ptr + 1; Error_Msg ("illegal wide character", Wptr); end Error_Illegal_Wide_Character; --------------------- -- Error_Long_Line -- --------------------- procedure Error_Long_Line is begin Error_Msg ("this line is too long", Current_Line_Start + Source_Ptr (Max_Line_Length)); end Error_Long_Line; ------------------------------- -- Error_No_Double_Underline -- ------------------------------- procedure Error_No_Double_Underline is begin Underline_Found := False; -- There are four cases, and we special case the messages if Source (Scan_Ptr) = '_' then if Source (Scan_Ptr - 1) = '_' then Error_Msg_S -- CODEFIX ("two consecutive underlines not permitted"); else Error_Msg_S ("underline cannot follow punctuation character"); end if; else if Source (Scan_Ptr - 1) = '_' then Error_Msg_S ("punctuation character cannot follow underline"); else Error_Msg_S ("two consecutive punctuation characters not permitted"); end if; end if; end Error_No_Double_Underline; ---------- -- Nlit -- ---------- procedure Nlit is C : Character; -- Current source program character Base_Char : Character; -- Either # or : (character at start of based number) Base : Int; -- Value of base UI_Base : Uint; -- Value of base in Uint format UI_Int_Value : Uint; -- Value of integer scanned by Scan_Integer in Uint format UI_Num_Value : Uint; -- Value of integer in numeric value being scanned Scale : Int; -- Scale value for real literal UI_Scale : Uint; -- Scale in Uint format Exponent_Is_Negative : Boolean; -- Set true for negative exponent Extended_Digit_Value : Int; -- Extended digit value Point_Scanned : Boolean; -- Flag for decimal point scanned in numeric literal ----------------------- -- Local Subprograms -- ----------------------- procedure Error_Digit_Expected; -- Signal error of bad digit, Scan_Ptr points to the location at -- which the digit was expected on input, and is unchanged on return. procedure Scan_Integer; -- Procedure to scan integer literal. On entry, Scan_Ptr points to a -- digit, on exit Scan_Ptr points past the last character of the -- integer. -- -- For each digit encountered, UI_Int_Value is multiplied by 10, and -- the value of the digit added to the result. In addition, the -- value in Scale is decremented by one for each actual digit -- scanned. -------------------------- -- Error_Digit_Expected -- -------------------------- procedure Error_Digit_Expected is begin Error_Msg_S ("digit expected"); end Error_Digit_Expected; ------------------ -- Scan_Integer -- ------------------ procedure Scan_Integer is C : Character; -- Next character scanned begin C := Source (Scan_Ptr); -- Loop through digits (allowing underlines) loop Accumulate_Checksum (C); UI_Int_Value := UI_Int_Value * 10 + (Character'Pos (C) - Character'Pos ('0')); Scan_Ptr := Scan_Ptr + 1; Scale := Scale - 1; C := Source (Scan_Ptr); -- Case of underline encountered if C = '_' then -- We do not accumulate the '_' in the checksum, so that -- 1_234 is equivalent to 1234, and does not trigger -- compilation for "minimal recompilation" (gnatmake -m). loop Scan_Ptr := Scan_Ptr + 1; C := Source (Scan_Ptr); exit when C /= '_'; Error_No_Double_Underline; end loop; if C not in '0' .. '9' then Error_Digit_Expected; exit; end if; else exit when C not in '0' .. '9'; end if; end loop; end Scan_Integer; -- Start of Processing for Nlit begin Base := 10; UI_Base := Uint_10; UI_Int_Value := Uint_0; Based_Literal_Uses_Colon := False; Scale := 0; Scan_Integer; Point_Scanned := False; UI_Num_Value := UI_Int_Value; -- Various possibilities now for continuing the literal are period, -- E/e (for exponent), or :/# (for based literal). Scale := 0; C := Source (Scan_Ptr); if C = '.' then -- Scan out point, but do not scan past .. which is a range -- sequence, and must not be eaten up scanning a numeric literal. while C = '.' and then Source (Scan_Ptr + 1) /= '.' loop Accumulate_Checksum ('.'); if Point_Scanned then Error_Msg_S ("duplicate point ignored"); end if; Point_Scanned := True; Scan_Ptr := Scan_Ptr + 1; C := Source (Scan_Ptr); if C not in '0' .. '9' then Error_Msg ("real literal cannot end with point", Scan_Ptr - 1); else Scan_Integer; UI_Num_Value := UI_Int_Value; end if; end loop; -- Based literal case. The base is the value we already scanned. -- In the case of colon, we insist that the following character -- is indeed an extended digit or a period. This catches a number -- of common errors, as well as catching the well known tricky -- bug otherwise arising from "x : integer range 1 .. 10:= 6;" elsif C = '#' or else (C = ':' and then (Source (Scan_Ptr + 1) = '.' or else Source (Scan_Ptr + 1) in '0' .. '9' or else Source (Scan_Ptr + 1) in 'A' .. 'Z' or else Source (Scan_Ptr + 1) in 'a' .. 'z')) then Accumulate_Checksum (C); Base_Char := C; UI_Base := UI_Int_Value; if Base_Char = ':' then Based_Literal_Uses_Colon := True; end if; if UI_Base < 2 or else UI_Base > 16 then Error_Msg_SC ("base not 2-16"); UI_Base := Uint_16; end if; Base := UI_To_Int (UI_Base); Scan_Ptr := Scan_Ptr + 1; -- Scan out extended integer [. integer] C := Source (Scan_Ptr); UI_Int_Value := Uint_0; Scale := 0; loop if C in '0' .. '9' then Accumulate_Checksum (C); Extended_Digit_Value := Int'(Character'Pos (C)) - Int'(Character'Pos ('0')); elsif C in 'A' .. 'F' then Accumulate_Checksum (Character'Val (Character'Pos (C) + 32)); Extended_Digit_Value := Int'(Character'Pos (C)) - Int'(Character'Pos ('A')) + 10; elsif C in 'a' .. 'f' then Accumulate_Checksum (C); Extended_Digit_Value := Int'(Character'Pos (C)) - Int'(Character'Pos ('a')) + 10; else Error_Msg_S ("extended digit expected"); exit; end if; if Extended_Digit_Value >= Base then Error_Msg_S ("digit '>= base"); end if; UI_Int_Value := UI_Int_Value * UI_Base + Extended_Digit_Value; Scale := Scale - 1; Scan_Ptr := Scan_Ptr + 1; C := Source (Scan_Ptr); if C = '_' then loop Accumulate_Checksum ('_'); Scan_Ptr := Scan_Ptr + 1; C := Source (Scan_Ptr); exit when C /= '_'; Error_No_Double_Underline; end loop; elsif C = '.' then Accumulate_Checksum ('.'); if Point_Scanned then Error_Msg_S ("duplicate point ignored"); end if; Scan_Ptr := Scan_Ptr + 1; C := Source (Scan_Ptr); Point_Scanned := True; Scale := 0; elsif C = Base_Char then Accumulate_Checksum (C); Scan_Ptr := Scan_Ptr + 1; exit; elsif C = '#' or else C = ':' then Error_Msg_S ("based number delimiters must match"); Scan_Ptr := Scan_Ptr + 1; exit; elsif not Identifier_Char (C) then if Base_Char = '#' then Error_Msg_S -- CODEFIX ("missing '#"); else Error_Msg_S -- CODEFIX ("missing ':"); end if; exit; end if; end loop; UI_Num_Value := UI_Int_Value; end if; -- Scan out exponent if not Point_Scanned then Scale := 0; UI_Scale := Uint_0; else UI_Scale := UI_From_Int (Scale); end if; if Source (Scan_Ptr) = 'e' or else Source (Scan_Ptr) = 'E' then Accumulate_Checksum ('e'); Scan_Ptr := Scan_Ptr + 1; Exponent_Is_Negative := False; if Source (Scan_Ptr) = '+' then Accumulate_Checksum ('+'); Scan_Ptr := Scan_Ptr + 1; elsif Source (Scan_Ptr) = '-' then Accumulate_Checksum ('-'); if not Point_Scanned then Error_Msg_S ("negative exponent not allowed for integer literal"); else Exponent_Is_Negative := True; end if; Scan_Ptr := Scan_Ptr + 1; end if; UI_Int_Value := Uint_0; if Source (Scan_Ptr) in '0' .. '9' then Scan_Integer; else Error_Digit_Expected; end if; if Exponent_Is_Negative then UI_Scale := UI_Scale - UI_Int_Value; else UI_Scale := UI_Scale + UI_Int_Value; end if; end if; -- Case of real literal to be returned if Point_Scanned then Token := Tok_Real_Literal; Real_Literal_Value := UR_From_Components ( Num => UI_Num_Value, Den => -UI_Scale, Rbase => Base); -- Case of integer literal to be returned else Token := Tok_Integer_Literal; if UI_Scale = 0 then Int_Literal_Value := UI_Num_Value; -- Avoid doing possibly expensive calculations in cases like -- parsing 163E800_000# when semantics will not be done anyway. -- This is especially useful when parsing garbled input. elsif Operating_Mode /= Check_Syntax and then (Serious_Errors_Detected = 0 or else Try_Semantics) then Int_Literal_Value := UI_Num_Value * UI_Base ** UI_Scale; else Int_Literal_Value := No_Uint; end if; end if; if Checksum_Accumulate_Token_Checksum then Accumulate_Token_Checksum; end if; return; end Nlit; ---------- -- Slit -- ---------- procedure Slit is Delimiter : Character; -- Delimiter (first character of string) C : Character; -- Current source program character Code : Char_Code; -- Current character code value Err : Boolean; -- Error flag for Scan_Wide call String_Start : Source_Ptr; -- Point to first character of string procedure Error_Bad_String_Char; -- Signal bad character in string/character literal. On entry -- Scan_Ptr points to the improper character encountered during the -- scan. Scan_Ptr is not modified, so it still points to the bad -- character on return. procedure Error_Unterminated_String; -- Procedure called if a line terminator character is encountered -- during scanning a string, meaning that the string is not properly -- terminated. procedure Set_String; -- Procedure used to distinguish between string and operator symbol. -- On entry the string has been scanned out, and its characters start -- at Token_Ptr and end one character before Scan_Ptr. On exit Token -- is set to Tok_String_Literal/Tok_Operator_Symbol as appropriate, -- and Token_Node is appropriately initialized. In addition, in the -- operator symbol case, Token_Name is appropriately set, and the -- flags [Wide_]Wide_Character_Found are set appropriately. --------------------------- -- Error_Bad_String_Char -- --------------------------- procedure Error_Bad_String_Char is C : constant Character := Source (Scan_Ptr); begin if C = HT then Error_Msg_S ("horizontal tab not allowed in string"); elsif C = VT or else C = FF then Error_Msg_S ("format effector not allowed in string"); elsif C in Upper_Half_Character then Error_Msg_S ("(Ada 83) upper half character not allowed"); else Error_Msg_S ("control character not allowed in string"); end if; end Error_Bad_String_Char; ------------------------------- -- Error_Unterminated_String -- ------------------------------- procedure Error_Unterminated_String is S : Source_Ptr; begin -- An interesting little refinement. Consider the following -- examples: -- A := "this is an unterminated string; -- A := "this is an unterminated string & -- P(A, "this is a parameter that didn't get terminated); -- P("this is a parameter that didn't get terminated, A); -- We fiddle a little to do slightly better placement in these -- cases also if there is white space at the end of the line we -- place the flag at the start of this white space, not at the -- end. Note that we only have to test for blanks, since tabs -- aren't allowed in strings in the first place and would have -- caused an error message. -- Two more cases that we treat specially are: -- A := "this string uses the wrong terminator' -- A := "this string uses the wrong terminator' & -- In these cases we give a different error message as well -- We actually reposition the scan pointer to the point where we -- place the flag in these cases, since it seems a better bet on -- the original intention. while Source (Scan_Ptr - 1) = ' ' or else Source (Scan_Ptr - 1) = '&' loop Scan_Ptr := Scan_Ptr - 1; Unstore_String_Char; end loop; -- Check for case of incorrect string terminator, but single quote -- is not considered incorrect if the opening terminator misused -- a single quote (error message already given). if Delimiter /= ''' and then Source (Scan_Ptr - 1) = ''' then Unstore_String_Char; Error_Msg ("incorrect string terminator character", Scan_Ptr - 1); return; end if; -- Backup over semicolon or right-paren/semicolon sequence if Source (Scan_Ptr - 1) = ';' then Scan_Ptr := Scan_Ptr - 1; Unstore_String_Char; if Source (Scan_Ptr - 1) = ')' then Scan_Ptr := Scan_Ptr - 1; Unstore_String_Char; end if; end if; -- See if there is a comma in the string, if so, guess that -- the first comma terminates the string. S := String_Start; while S < Scan_Ptr loop if Source (S) = ',' then while Scan_Ptr > S loop Scan_Ptr := Scan_Ptr - 1; Unstore_String_Char; end loop; exit; end if; S := S + 1; end loop; -- Now we have adjusted the scan pointer, give message Error_Msg_S -- CODEFIX ("missing string quote"); end Error_Unterminated_String; ---------------- -- Set_String -- ---------------- procedure Set_String is Slen : constant Int := Int (Scan_Ptr - Token_Ptr - 2); C1 : Character; C2 : Character; C3 : Character; begin -- Token_Name is currently set to Error_Name. The following -- section of code resets Token_Name to the proper Name_Op_xx -- value if the string is a valid operator symbol, otherwise it is -- left set to Error_Name. if Slen = 1 then C1 := Source (Token_Ptr + 1); case C1 is when '=' => Token_Name := Name_Op_Eq; when '>' => Token_Name := Name_Op_Gt; when '<' => Token_Name := Name_Op_Lt; when '+' => Token_Name := Name_Op_Add; when '-' => Token_Name := Name_Op_Subtract; when '&' => Token_Name := Name_Op_Concat; when '*' => Token_Name := Name_Op_Multiply; when '/' => Token_Name := Name_Op_Divide; when others => null; end case; elsif Slen = 2 then C1 := Source (Token_Ptr + 1); C2 := Source (Token_Ptr + 2); if C1 = '*' and then C2 = '*' then Token_Name := Name_Op_Expon; elsif C2 = '=' then if C1 = '/' then Token_Name := Name_Op_Ne; elsif C1 = '<' then Token_Name := Name_Op_Le; elsif C1 = '>' then Token_Name := Name_Op_Ge; end if; elsif (C1 = 'O' or else C1 = 'o') and then -- OR (C2 = 'R' or else C2 = 'r') then Token_Name := Name_Op_Or; end if; elsif Slen = 3 then C1 := Source (Token_Ptr + 1); C2 := Source (Token_Ptr + 2); C3 := Source (Token_Ptr + 3); if (C1 = 'A' or else C1 = 'a') and then -- AND (C2 = 'N' or else C2 = 'n') and then (C3 = 'D' or else C3 = 'd') then Token_Name := Name_Op_And; elsif (C1 = 'A' or else C1 = 'a') and then -- ABS (C2 = 'B' or else C2 = 'b') and then (C3 = 'S' or else C3 = 's') then Token_Name := Name_Op_Abs; elsif (C1 = 'M' or else C1 = 'm') and then -- MOD (C2 = 'O' or else C2 = 'o') and then (C3 = 'D' or else C3 = 'd') then Token_Name := Name_Op_Mod; elsif (C1 = 'N' or else C1 = 'n') and then -- NOT (C2 = 'O' or else C2 = 'o') and then (C3 = 'T' or else C3 = 't') then Token_Name := Name_Op_Not; elsif (C1 = 'R' or else C1 = 'r') and then -- REM (C2 = 'E' or else C2 = 'e') and then (C3 = 'M' or else C3 = 'm') then Token_Name := Name_Op_Rem; elsif (C1 = 'X' or else C1 = 'x') and then -- XOR (C2 = 'O' or else C2 = 'o') and then (C3 = 'R' or else C3 = 'r') then Token_Name := Name_Op_Xor; end if; end if; -- If it is an operator symbol, then Token_Name is set. If it is -- some other string value, then Token_Name still contains -- Error_Name. if Token_Name = Error_Name then Token := Tok_String_Literal; else Token := Tok_Operator_Symbol; end if; end Set_String; -- Start of processing for Slit begin -- On entry, Scan_Ptr points to the opening character of the string -- which is either a percent, double quote, or apostrophe (single -- quote). The latter case is an error detected by the character -- literal circuit. String_Start := Scan_Ptr; Delimiter := Source (Scan_Ptr); Accumulate_Checksum (Delimiter); Start_String; Wide_Character_Found := False; Wide_Wide_Character_Found := False; Scan_Ptr := Scan_Ptr + 1; -- Loop to scan out characters of string literal loop C := Source (Scan_Ptr); if C = Delimiter then Accumulate_Checksum (C); Scan_Ptr := Scan_Ptr + 1; exit when Source (Scan_Ptr) /= Delimiter; Code := Get_Char_Code (C); Accumulate_Checksum (C); Scan_Ptr := Scan_Ptr + 1; else if C = '"' and then Delimiter = '%' then Error_Msg_S ("quote not allowed in percent delimited string"); Code := Get_Char_Code (C); Scan_Ptr := Scan_Ptr + 1; elsif Start_Of_Wide_Character then Wptr := Scan_Ptr; Scan_Wide (Source, Scan_Ptr, Code, Err); if Err then Error_Illegal_Wide_Character; Code := Get_Char_Code (' '); end if; Accumulate_Checksum (Code); -- In Ada 95 mode we allow any wide characters in a string -- but in Ada 2005, the set of characters allowed has been -- restricted to graphic characters. if Ada_Version >= Ada_2005 and then Is_UTF_32_Non_Graphic (UTF_32 (Code)) then Error_Msg ("(Ada 2005) non-graphic character not permitted " & "in string literal", Wptr); end if; else Accumulate_Checksum (C); if C not in Graphic_Character then if C in Line_Terminator then Error_Unterminated_String; exit; elsif C in Upper_Half_Character then if Ada_Version = Ada_83 then Error_Bad_String_Char; end if; else Error_Bad_String_Char; end if; end if; Code := Get_Char_Code (C); Scan_Ptr := Scan_Ptr + 1; end if; end if; Store_String_Char (Code); if not In_Character_Range (Code) then if In_Wide_Character_Range (Code) then Wide_Character_Found := True; else Wide_Wide_Character_Found := True; end if; end if; end loop; String_Literal_Id := End_String; Set_String; return; end Slit; ---------------------------------- -- Skip_Other_Format_Characters -- ---------------------------------- procedure Skip_Other_Format_Characters is P : Source_Ptr; Code : Char_Code; Err : Boolean; begin while Start_Of_Wide_Character loop P := Scan_Ptr; Scan_Wide (Source, Scan_Ptr, Code, Err); if not Is_UTF_32_Other (UTF_32 (Code)) then Scan_Ptr := P; return; end if; end loop; end Skip_Other_Format_Characters; ----------------------------- -- Start_Of_Wide_Character -- ----------------------------- function Start_Of_Wide_Character return Boolean is C : constant Character := Source (Scan_Ptr); begin -- ESC encoding method with ESC present if C = ESC and then Wide_Character_Encoding_Method in WC_ESC_Encoding_Method then return True; -- Upper half character with upper half encoding elsif C in Upper_Half_Character and then Upper_Half_Encoding then return True; -- Brackets encoding elsif C = '[' and then Source (Scan_Ptr + 1) = '"' and then Identifier_Char (Source (Scan_Ptr + 2)) then return True; -- Not the start of a wide character else return False; end if; end Start_Of_Wide_Character; -- Start of processing for Scan begin Prev_Token := Token; Prev_Token_Ptr := Token_Ptr; Token_Name := Error_Name; -- The following loop runs more than once only if a format effector -- (tab, vertical tab, form feed, line feed, carriage return) is -- encountered and skipped, or some error situation, such as an -- illegal character, is encountered. <<Scan_Next_Character>> loop -- Skip past blanks, loop is opened up for speed while Source (Scan_Ptr) = ' ' loop if Source (Scan_Ptr + 1) /= ' ' then Scan_Ptr := Scan_Ptr + 1; exit; end if; if Source (Scan_Ptr + 2) /= ' ' then Scan_Ptr := Scan_Ptr + 2; exit; end if; if Source (Scan_Ptr + 3) /= ' ' then Scan_Ptr := Scan_Ptr + 3; exit; end if; if Source (Scan_Ptr + 4) /= ' ' then Scan_Ptr := Scan_Ptr + 4; exit; end if; if Source (Scan_Ptr + 5) /= ' ' then Scan_Ptr := Scan_Ptr + 5; exit; end if; if Source (Scan_Ptr + 6) /= ' ' then Scan_Ptr := Scan_Ptr + 6; exit; end if; if Source (Scan_Ptr + 7) /= ' ' then Scan_Ptr := Scan_Ptr + 7; exit; end if; Scan_Ptr := Scan_Ptr + 8; end loop; -- We are now at a non-blank character, which is the first character -- of the token we will scan, and hence the value of Token_Ptr. Token_Ptr := Scan_Ptr; -- Here begins the main case statement which transfers control on the -- basis of the non-blank character we have encountered. case Source (Scan_Ptr) is -- Line terminator characters when CR | LF | FF | VT => goto Scan_Line_Terminator; -- Horizontal tab, just skip past it when HT => if Style_Check then Style.Check_HT; end if; Scan_Ptr := Scan_Ptr + 1; -- End of file character, treated as an end of file only if it is -- the last character in the buffer, otherwise it is ignored. when EOF => if Scan_Ptr = Source_Last (Current_Source_File) then Check_End_Of_Line; if Style_Check then Style.Check_EOF; end if; Token := Tok_EOF; return; else Scan_Ptr := Scan_Ptr + 1; end if; -- Ampersand when '&' => Accumulate_Checksum ('&'); if Source (Scan_Ptr + 1) = '&' then Error_Msg_S -- CODEFIX ("'&'& should be `AND THEN`"); Scan_Ptr := Scan_Ptr + 2; Token := Tok_And; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Ampersand; return; end if; -- Asterisk (can be multiplication operator or double asterisk which -- is the exponentiation compound delimiter). when '*' => Accumulate_Checksum ('*'); if Source (Scan_Ptr + 1) = '*' then Accumulate_Checksum ('*'); Scan_Ptr := Scan_Ptr + 2; Token := Tok_Double_Asterisk; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Asterisk; return; end if; -- Colon, which can either be an isolated colon, or part of an -- assignment compound delimiter. when ':' => Accumulate_Checksum (':'); if Double_Char_Token ('=') then Token := Tok_Colon_Equal; if Style_Check then Style.Check_Colon_Equal; end if; return; elsif Source (Scan_Ptr + 1) = '-' and then Source (Scan_Ptr + 2) /= '-' then Token := Tok_Colon_Equal; Error_Msg -- CODEFIX (":- should be :=", Scan_Ptr); Scan_Ptr := Scan_Ptr + 2; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Colon; if Style_Check then Style.Check_Colon; end if; return; end if; -- Left parenthesis when '(' => Accumulate_Checksum ('('); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Left_Paren; if Style_Check then Style.Check_Left_Paren; end if; return; -- Left bracket when '[' => if Source (Scan_Ptr + 1) = '"' then goto Scan_Wide_Character; else Error_Msg_S ("illegal character, replaced by ""("""); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Left_Paren; return; end if; -- Left brace when '{' => Error_Msg_S ("illegal character, replaced by ""("""); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Left_Paren; return; -- Comma when ',' => Accumulate_Checksum (','); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Comma; if Style_Check then Style.Check_Comma; end if; return; -- Dot, which is either an isolated period, or part of a double dot -- compound delimiter sequence. We also check for the case of a -- digit following the period, to give a better error message. when '.' => Accumulate_Checksum ('.'); if Double_Char_Token ('.') then Token := Tok_Dot_Dot; if Style_Check then Style.Check_Dot_Dot; end if; return; elsif Source (Scan_Ptr + 1) in '0' .. '9' then Error_Msg_S ("numeric literal cannot start with point"); Scan_Ptr := Scan_Ptr + 1; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Dot; return; end if; -- Equal, which can either be an equality operator, or part of the -- arrow (=>) compound delimiter. when '=' => Accumulate_Checksum ('='); if Double_Char_Token ('>') then Token := Tok_Arrow; if Style_Check then Style.Check_Arrow; end if; return; elsif Source (Scan_Ptr + 1) = '=' then Error_Msg_S -- CODEFIX ("== should be ="); Scan_Ptr := Scan_Ptr + 1; end if; Scan_Ptr := Scan_Ptr + 1; Token := Tok_Equal; return; -- Greater than, which can be a greater than operator, greater than -- or equal operator, or first character of a right label bracket. when '>' => Accumulate_Checksum ('>'); if Double_Char_Token ('=') then Token := Tok_Greater_Equal; return; elsif Double_Char_Token ('>') then Token := Tok_Greater_Greater; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Greater; return; end if; -- Less than, which can be a less than operator, less than or equal -- operator, or the first character of a left label bracket, or the -- first character of a box (<>) compound delimiter. when '<' => Accumulate_Checksum ('<'); if Double_Char_Token ('=') then Token := Tok_Less_Equal; return; elsif Double_Char_Token ('>') then Token := Tok_Box; if Style_Check then Style.Check_Box; end if; return; elsif Double_Char_Token ('<') then Token := Tok_Less_Less; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Less; return; end if; -- Minus, which is either a subtraction operator, or the first -- character of double minus starting a comment when '-' => Minus_Case : begin if Source (Scan_Ptr + 1) = '>' then Error_Msg_S ("invalid token"); Scan_Ptr := Scan_Ptr + 2; Token := Tok_Arrow; return; elsif Source (Scan_Ptr + 1) /= '-' then Accumulate_Checksum ('-'); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Minus; return; -- Comment else -- Source (Scan_Ptr + 1) = '-' then if Style_Check then Style.Check_Comment; end if; Scan_Ptr := Scan_Ptr + 2; -- If we are in preprocessor mode with Replace_In_Comments set, -- then we return the "--" as a token on its own. if Replace_In_Comments then Token := Tok_Comment; return; end if; -- Otherwise scan out the comment Start_Of_Comment := Scan_Ptr; -- Loop to scan comment (this loop runs more than once only if -- a horizontal tab or other non-graphic character is scanned) loop -- Scan to non graphic character (opened up for speed) -- Note that we just eat left brackets, which means that -- bracket notation cannot be used for end of line -- characters in comments. This seems a reasonable choice, -- since no one would ever use brackets notation in a real -- program in this situation, and if we allow brackets -- notation, we forbid some valid comments which contain a -- brackets sequence that happens to match an end of line -- character. loop exit when Source (Scan_Ptr) not in Graphic_Character; Scan_Ptr := Scan_Ptr + 1; exit when Source (Scan_Ptr) not in Graphic_Character; Scan_Ptr := Scan_Ptr + 1; exit when Source (Scan_Ptr) not in Graphic_Character; Scan_Ptr := Scan_Ptr + 1; exit when Source (Scan_Ptr) not in Graphic_Character; Scan_Ptr := Scan_Ptr + 1; exit when Source (Scan_Ptr) not in Graphic_Character; Scan_Ptr := Scan_Ptr + 1; end loop; -- Keep going if horizontal tab if Source (Scan_Ptr) = HT then if Style_Check then Style.Check_HT; end if; Scan_Ptr := Scan_Ptr + 1; -- Terminate scan of comment if line terminator elsif Source (Scan_Ptr) in Line_Terminator then exit; -- Terminate scan of comment if end of file encountered -- (embedded EOF character or real last character in file) elsif Source (Scan_Ptr) = EOF then exit; -- If we have a wide character, we have to scan it out, -- because it might be a legitimate line terminator elsif Start_Of_Wide_Character then declare Wptr : constant Source_Ptr := Scan_Ptr; Code : Char_Code; Err : Boolean; begin Scan_Wide (Source, Scan_Ptr, Code, Err); -- If not well formed wide character, then just skip -- past it and ignore it. if Err then Scan_Ptr := Wptr + 1; -- If UTF_32 terminator, terminate comment scan elsif Is_UTF_32_Line_Terminator (UTF_32 (Code)) then Scan_Ptr := Wptr; exit; end if; end; -- Keep going if character in 80-FF range, or is ESC. These -- characters are allowed in comments by RM-2.1(1), 2.7(2). -- They are allowed even in Ada 83 mode according to the -- approved AI. ESC was added to the AI in June 93. elsif Source (Scan_Ptr) in Upper_Half_Character or else Source (Scan_Ptr) = ESC then Scan_Ptr := Scan_Ptr + 1; -- Otherwise we have an illegal comment character else Error_Illegal_Character; end if; end loop; -- Note that, except when comments are tokens, we do NOT -- execute a return here, instead we fall through to reexecute -- the scan loop to look for a token. if Comment_Is_Token then Name_Len := Integer (Scan_Ptr - Start_Of_Comment); Name_Buffer (1 .. Name_Len) := String (Source (Start_Of_Comment .. Scan_Ptr - 1)); Comment_Id := Name_Find; Token := Tok_Comment; return; end if; -- If the SPARK restriction is set for this unit, then generate -- a token Tok_SPARK_Hide for a SPARK HIDE directive. if Restriction_Check_Required (SPARK) and then Source (Start_Of_Comment) = '#' then declare Scan_SPARK_Ptr : Source_Ptr; begin Scan_SPARK_Ptr := Start_Of_Comment + 1; -- Scan out blanks while Source (Scan_SPARK_Ptr) = ' ' or else Source (Scan_SPARK_Ptr) = HT loop Scan_SPARK_Ptr := Scan_SPARK_Ptr + 1; end loop; -- Recognize HIDE directive. SPARK input cannot be -- encoded as wide characters, so only deal with -- lower/upper case. if (Source (Scan_SPARK_Ptr) = 'h' or else Source (Scan_SPARK_Ptr) = 'H') and then (Source (Scan_SPARK_Ptr + 1) = 'i' or else Source (Scan_SPARK_Ptr + 1) = 'I') and then (Source (Scan_SPARK_Ptr + 2) = 'd' or else Source (Scan_SPARK_Ptr + 2) = 'D') and then (Source (Scan_SPARK_Ptr + 3) = 'e' or else Source (Scan_SPARK_Ptr + 3) = 'E') and then (Source (Scan_SPARK_Ptr + 4) = ' ' or else Source (Scan_SPARK_Ptr + 4) = HT) then Token := Tok_SPARK_Hide; return; end if; end; end if; end if; end Minus_Case; -- Double quote or percent starting a string literal when '"' | '%' => Slit; Post_Scan; return; -- Apostrophe. This can either be the start of a character literal, -- or an isolated apostrophe used in a qualified expression or an -- attribute. We treat it as a character literal if it does not -- follow a right parenthesis, identifier, the keyword ALL or -- a literal. This means that we correctly treat constructs like: -- A := CHARACTER'('A'); -- Note that RM-2.2(7) does not require a separator between -- "CHARACTER" and "'" in the above. when ''' => Char_Literal_Case : declare Code : Char_Code; Err : Boolean; begin Accumulate_Checksum ('''); Scan_Ptr := Scan_Ptr + 1; -- Here is where we make the test to distinguish the cases. Treat -- as apostrophe if previous token is an identifier, right paren -- or the reserved word "all" (latter case as in A.all'Address) -- (or the reserved word "project" in project files). Also treat -- it as apostrophe after a literal (this catches some legitimate -- cases, like A."abs"'Address, and also gives better error -- behavior for impossible cases like 123'xxx). if Prev_Token = Tok_Identifier or else Prev_Token = Tok_Right_Paren or else Prev_Token = Tok_All or else Prev_Token = Tok_Project or else Prev_Token in Token_Class_Literal then Token := Tok_Apostrophe; if Style_Check then Style.Check_Apostrophe; end if; return; -- Otherwise the apostrophe starts a character literal else -- Case of wide character literal if Start_Of_Wide_Character then Wptr := Scan_Ptr; Scan_Wide (Source, Scan_Ptr, Code, Err); Accumulate_Checksum (Code); if Err then Error_Illegal_Wide_Character; Code := Character'Pos (' '); -- In Ada 95 mode we allow any wide character in a character -- literal, but in Ada 2005, the set of characters allowed -- is restricted to graphic characters. elsif Ada_Version >= Ada_2005 and then Is_UTF_32_Non_Graphic (UTF_32 (Code)) then Error_Msg -- CODEFIX???? ("(Ada 2005) non-graphic character not permitted " & "in character literal", Wptr); end if; if Source (Scan_Ptr) /= ''' then Error_Msg_S ("missing apostrophe"); else Scan_Ptr := Scan_Ptr + 1; end if; -- If we do not find a closing quote in the expected place then -- assume that we have a misguided attempt at a string literal. -- However, if previous token is RANGE, then we return an -- apostrophe instead since this gives better error recovery elsif Source (Scan_Ptr + 1) /= ''' then if Prev_Token = Tok_Range then Token := Tok_Apostrophe; return; else Scan_Ptr := Scan_Ptr - 1; Error_Msg_S ("strings are delimited by double quote character"); Slit; Post_Scan; return; end if; -- Otherwise we have a (non-wide) character literal else Accumulate_Checksum (Source (Scan_Ptr)); if Source (Scan_Ptr) not in Graphic_Character then if Source (Scan_Ptr) in Upper_Half_Character then if Ada_Version = Ada_83 then Error_Illegal_Character; end if; else Error_Illegal_Character; end if; end if; Code := Get_Char_Code (Source (Scan_Ptr)); Scan_Ptr := Scan_Ptr + 2; end if; -- Fall through here with Scan_Ptr updated past the closing -- quote, and Code set to the Char_Code value for the literal Accumulate_Checksum ('''); Token := Tok_Char_Literal; Set_Character_Literal_Name (Code); Token_Name := Name_Find; Character_Code := Code; Post_Scan; return; end if; end Char_Literal_Case; -- Right parenthesis when ')' => Accumulate_Checksum (')'); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Right_Paren; if Style_Check then Style.Check_Right_Paren; end if; return; -- Right bracket or right brace, treated as right paren when ']' | '}' => Error_Msg_S ("illegal character, replaced by "")"""); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Right_Paren; return; -- Slash (can be division operator or first character of not equal) when '/' => Accumulate_Checksum ('/'); if Double_Char_Token ('=') then Token := Tok_Not_Equal; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Slash; return; end if; -- Semicolon when ';' => Accumulate_Checksum (';'); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Semicolon; if Style_Check then Style.Check_Semicolon; end if; return; -- Vertical bar when '|' => Vertical_Bar_Case : begin Accumulate_Checksum ('|'); -- Special check for || to give nice message if Source (Scan_Ptr + 1) = '|' then Error_Msg_S -- CODEFIX ("""'|'|"" should be `OR ELSE`"); Scan_Ptr := Scan_Ptr + 2; Token := Tok_Or; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Vertical_Bar; if Style_Check then Style.Check_Vertical_Bar; end if; Post_Scan; return; end if; end Vertical_Bar_Case; -- Exclamation, replacement character for vertical bar when '!' => Exclamation_Case : begin Accumulate_Checksum ('!'); if Source (Scan_Ptr + 1) = '=' then Error_Msg_S -- CODEFIX ("'!= should be /="); Scan_Ptr := Scan_Ptr + 2; Token := Tok_Not_Equal; return; else Scan_Ptr := Scan_Ptr + 1; Token := Tok_Vertical_Bar; Post_Scan; return; end if; end Exclamation_Case; -- Plus when '+' => Plus_Case : begin Accumulate_Checksum ('+'); Scan_Ptr := Scan_Ptr + 1; Token := Tok_Plus; return; end Plus_Case; -- Digits starting a numeric literal when '0' .. '9' => -- First a bit of a scan ahead to see if we have a case of an -- identifier starting with a digit (remembering exponent case). declare C : constant Character := Source (Scan_Ptr + 1); begin -- OK literal if digit followed by digit or underscore if C in '0' .. '9' or else C = '_' then null; -- OK literal if digit not followed by identifier char elsif not Identifier_Char (C) then null; -- OK literal if digit followed by e/E followed by digit/sign. -- We also allow underscore after the E, which is an error, but -- better handled by Nlit than deciding this is an identifier. elsif (C = 'e' or else C = 'E') and then (Source (Scan_Ptr + 2) in '0' .. '9' or else Source (Scan_Ptr + 2) = '+' or else Source (Scan_Ptr + 2) = '-' or else Source (Scan_Ptr + 2) = '_') then null; -- Here we have what really looks like an identifier that -- starts with a digit, so give error msg. else Error_Msg_S ("identifier may not start with digit"); Name_Len := 1; Underline_Found := False; Name_Buffer (1) := Source (Scan_Ptr); Accumulate_Checksum (Name_Buffer (1)); Scan_Ptr := Scan_Ptr + 1; goto Scan_Identifier; end if; end; -- Here we have an OK integer literal Nlit; -- Check for proper delimiter, ignoring other format characters Skip_Other_Format_Characters; if Identifier_Char (Source (Scan_Ptr)) then Error_Msg_S ("delimiter required between literal and identifier"); end if; Post_Scan; return; -- Lower case letters when 'a' .. 'z' => Name_Len := 1; Underline_Found := False; Name_Buffer (1) := Source (Scan_Ptr); Accumulate_Checksum (Name_Buffer (1)); Scan_Ptr := Scan_Ptr + 1; goto Scan_Identifier; -- Upper case letters when 'A' .. 'Z' => Name_Len := 1; Underline_Found := False; Name_Buffer (1) := Character'Val (Character'Pos (Source (Scan_Ptr)) + 32); Accumulate_Checksum (Name_Buffer (1)); Scan_Ptr := Scan_Ptr + 1; goto Scan_Identifier; -- Underline character when '_' => if Special_Characters ('_') then Token_Ptr := Scan_Ptr; Scan_Ptr := Scan_Ptr + 1; Token := Tok_Special; Special_Character := '_'; return; end if; Error_Msg_S ("identifier cannot start with underline"); Name_Len := 1; Name_Buffer (1) := '_'; Scan_Ptr := Scan_Ptr + 1; Underline_Found := False; goto Scan_Identifier; -- Space (not possible, because we scanned past blanks) when ' ' => raise Program_Error; -- Characters in top half of ASCII 8-bit chart when Upper_Half_Character => -- Wide character case if Upper_Half_Encoding then goto Scan_Wide_Character; -- Otherwise we have OK Latin-1 character else -- Upper half characters may possibly be identifier letters -- but can never be digits, so Identifier_Char can be used to -- test for a valid start of identifier character. if Identifier_Char (Source (Scan_Ptr)) then Name_Len := 0; Underline_Found := False; goto Scan_Identifier; else Error_Illegal_Character; end if; end if; when ESC => -- ESC character, possible start of identifier if wide characters -- using ESC encoding are allowed in identifiers, which we can -- tell by looking at the Identifier_Char flag for ESC, which is -- only true if these conditions are met. In Ada 2005 mode, may -- also be valid UTF_32 space or line terminator character. if Identifier_Char (ESC) then Name_Len := 0; goto Scan_Wide_Character; else Error_Illegal_Character; end if; -- Invalid control characters when NUL | SOH | STX | ETX | EOT | ENQ | ACK | BEL | BS | ASCII.SO | SI | DLE | DC1 | DC2 | DC3 | DC4 | NAK | SYN | ETB | CAN | EM | FS | GS | RS | US | DEL => Error_Illegal_Character; -- Invalid graphic characters when '#' | '$' | '?' | '@' | '`' | '\' | '^' | '~' => -- If Set_Special_Character has been called for this character, -- set Scans.Special_Character and return a Special token. if Special_Characters (Source (Scan_Ptr)) then Token_Ptr := Scan_Ptr; Token := Tok_Special; Special_Character := Source (Scan_Ptr); Scan_Ptr := Scan_Ptr + 1; return; -- Otherwise, this is an illegal character else Error_Illegal_Character; end if; -- End switch on non-blank character end case; -- End loop past format effectors. The exit from this loop is by -- executing a return statement following completion of token scan -- (control never falls out of this loop to the code which follows) end loop; -- Wide_Character scanning routine. On entry we have encountered the -- initial character of a wide character sequence. <<Scan_Wide_Character>> declare Code : Char_Code; Cat : Category; Err : Boolean; begin Wptr := Scan_Ptr; Scan_Wide (Source, Scan_Ptr, Code, Err); -- If bad wide character, signal error and continue scan if Err then Error_Illegal_Wide_Character; goto Scan_Next_Character; end if; Cat := Get_Category (UTF_32 (Code)); -- If OK letter, reset scan ptr and go scan identifier if Is_UTF_32_Letter (Cat) then Scan_Ptr := Wptr; Name_Len := 0; Underline_Found := False; goto Scan_Identifier; -- If OK wide space, ignore and keep scanning (we do not include -- any ignored spaces in checksum) elsif Is_UTF_32_Space (Cat) then goto Scan_Next_Character; -- If other format character, ignore and keep scanning (again we -- do not include in the checksum) (this is for AI-0079). elsif Is_UTF_32_Other (Cat) then goto Scan_Next_Character; -- If OK wide line terminator, terminate current line elsif Is_UTF_32_Line_Terminator (UTF_32 (Code)) then Scan_Ptr := Wptr; goto Scan_Line_Terminator; -- Punctuation is an error (at start of identifier) elsif Is_UTF_32_Punctuation (Cat) then Error_Msg ("identifier cannot start with punctuation", Wptr); Scan_Ptr := Wptr; Name_Len := 0; Underline_Found := False; goto Scan_Identifier; -- Mark character is an error (at start of identifier) elsif Is_UTF_32_Mark (Cat) then Error_Msg ("identifier cannot start with mark character", Wptr); Scan_Ptr := Wptr; Name_Len := 0; Underline_Found := False; goto Scan_Identifier; -- Extended digit character is an error. Could be bad start of -- identifier or bad literal. Not worth doing too much to try to -- distinguish these cases, but we will do a little bit. elsif Is_UTF_32_Digit (Cat) then Error_Msg ("identifier cannot start with digit character", Wptr); Scan_Ptr := Wptr; Name_Len := 0; Underline_Found := False; goto Scan_Identifier; -- All other wide characters are illegal here else Error_Illegal_Wide_Character; goto Scan_Next_Character; end if; end; -- Routine to scan line terminator. On entry Scan_Ptr points to a -- character which is one of FF,LR,CR,VT, or one of the wide characters -- that is treated as a line terminator. <<Scan_Line_Terminator>> -- Check line too long Check_End_Of_Line; -- Set Token_Ptr, if End_Of_Line is a token, for the case when it is -- a physical line. if End_Of_Line_Is_Token then Token_Ptr := Scan_Ptr; end if; declare Physical : Boolean; begin Skip_Line_Terminators (Scan_Ptr, Physical); -- If we are at start of physical line, update scan pointers to -- reflect the start of the new line. if Physical then Current_Line_Start := Scan_Ptr; Start_Column := Set_Start_Column; First_Non_Blank_Location := Scan_Ptr; -- If End_Of_Line is a token, we return it as it is a -- physical line. if End_Of_Line_Is_Token then Token := Tok_End_Of_Line; return; end if; end if; end; goto Scan_Next_Character; -- Identifier scanning routine. On entry, some initial characters of -- the identifier may have already been stored in Name_Buffer. If so, -- Name_Len has the number of characters stored, otherwise Name_Len is -- set to zero on entry. Underline_Found is also set False on entry. <<Scan_Identifier>> -- This loop scans as fast as possible past lower half letters and -- digits, which we expect to be the most common characters. loop if Source (Scan_Ptr) in 'a' .. 'z' or else Source (Scan_Ptr) in '0' .. '9' then Name_Buffer (Name_Len + 1) := Source (Scan_Ptr); Accumulate_Checksum (Source (Scan_Ptr)); elsif Source (Scan_Ptr) in 'A' .. 'Z' then Name_Buffer (Name_Len + 1) := Character'Val (Character'Pos (Source (Scan_Ptr)) + 32); Accumulate_Checksum (Name_Buffer (Name_Len + 1)); else exit; end if; Underline_Found := False; Scan_Ptr := Scan_Ptr + 1; Name_Len := Name_Len + 1; end loop; -- If we fall through, then we have encountered either an underline -- character, or an extended identifier character (i.e. one from the -- upper half), or a wide character, or an identifier terminator. The -- initial test speeds us up in the most common case where we have -- an identifier terminator. Note that ESC is an identifier character -- only if a wide character encoding method that uses ESC encoding -- is active, so if we find an ESC character we know that we have a -- wide character. if Identifier_Char (Source (Scan_Ptr)) or else (Source (Scan_Ptr) in Upper_Half_Character and then Upper_Half_Encoding) then -- Case of underline if Source (Scan_Ptr) = '_' then Accumulate_Checksum ('_'); if Underline_Found then Error_No_Double_Underline; else Underline_Found := True; Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := '_'; end if; Scan_Ptr := Scan_Ptr + 1; goto Scan_Identifier; -- Upper half character elsif Source (Scan_Ptr) in Upper_Half_Character and then not Upper_Half_Encoding then Accumulate_Checksum (Source (Scan_Ptr)); Store_Encoded_Character (Get_Char_Code (Fold_Lower (Source (Scan_Ptr)))); Scan_Ptr := Scan_Ptr + 1; Underline_Found := False; goto Scan_Identifier; -- Left bracket not followed by a quote terminates an identifier. -- This is an error, but we don't want to give a junk error msg -- about wide characters in this case! elsif Source (Scan_Ptr) = '[' and then Source (Scan_Ptr + 1) /= '"' then null; -- We know we have a wide character encoding here (the current -- character is either ESC, left bracket, or an upper half -- character depending on the encoding method). else -- Scan out the wide character and insert the appropriate -- encoding into the name table entry for the identifier. declare Code : Char_Code; Err : Boolean; Chr : Character; Cat : Category; begin Wptr := Scan_Ptr; Scan_Wide (Source, Scan_Ptr, Code, Err); -- If error, signal error if Err then Error_Illegal_Wide_Character; -- If the character scanned is a normal identifier -- character, then we treat it that way. elsif In_Character_Range (Code) and then Identifier_Char (Get_Character (Code)) then Chr := Get_Character (Code); Accumulate_Checksum (Chr); Store_Encoded_Character (Get_Char_Code (Fold_Lower (Chr))); Underline_Found := False; -- Here if not a normal identifier character else Cat := Get_Category (UTF_32 (Code)); -- Wide character in Unicode category "Other, Format" -- is not accepted in an identifier. This is because it -- it is considered a security risk (AI-0091). -- However, it is OK for such a character to appear at -- the end of an identifier. if Is_UTF_32_Other (Cat) then if not Identifier_Char (Source (Scan_Ptr)) then goto Scan_Identifier_Complete; else Error_Msg ("identifier cannot contain other_format " & "character", Wptr); goto Scan_Identifier; end if; -- Wide character in category Separator,Space terminates elsif Is_UTF_32_Space (Cat) then goto Scan_Identifier_Complete; end if; -- Here if wide character is part of the identifier -- Make sure we are allowing wide characters in -- identifiers. Note that we allow wide character -- notation for an OK identifier character. This in -- particular allows bracket or other notation to be -- used for upper half letters. -- Wide characters are always allowed in Ada 2005 if Identifier_Character_Set /= 'w' and then Ada_Version < Ada_2005 then Error_Msg ("wide character not allowed in identifier", Wptr); end if; -- If OK letter, store it folding to upper case. Note -- that we include the folded letter in the checksum. if Is_UTF_32_Letter (Cat) then Code := Char_Code (UTF_32_To_Upper_Case (UTF_32 (Code))); Accumulate_Checksum (Code); Store_Encoded_Character (Code); Underline_Found := False; -- If OK extended digit or mark, then store it elsif Is_UTF_32_Digit (Cat) or else Is_UTF_32_Mark (Cat) then Accumulate_Checksum (Code); Store_Encoded_Character (Code); Underline_Found := False; -- Wide punctuation is also stored, but counts as an -- underline character for error checking purposes. elsif Is_UTF_32_Punctuation (Cat) then Accumulate_Checksum (Code); if Underline_Found then declare Cend : constant Source_Ptr := Scan_Ptr; begin Scan_Ptr := Wptr; Error_No_Double_Underline; Scan_Ptr := Cend; end; else Store_Encoded_Character (Code); Underline_Found := True; end if; -- Any other wide character is not acceptable else Error_Msg ("invalid wide character in identifier", Wptr); end if; end if; goto Scan_Identifier; end; end if; end if; -- Scan of identifier is complete. The identifier is stored in -- Name_Buffer, and Scan_Ptr points past the last character. <<Scan_Identifier_Complete>> Token_Name := Name_Find; -- Check for identifier ending with underline or punctuation char if Underline_Found then Underline_Found := False; if Source (Scan_Ptr - 1) = '_' then Error_Msg ("identifier cannot end with underline", Scan_Ptr - 1); else Error_Msg ("identifier cannot end with punctuation character", Wptr); end if; end if; -- We will assume it is an identifier, not a keyword, so that the -- checksum is independent of the Ada version. Token := Tok_Identifier; -- Here is where we check if it was a keyword if Is_Keyword_Name (Token_Name) then if Opt.Checksum_GNAT_6_3 then Token := Token_Type'Val (Get_Name_Table_Byte (Token_Name)); if Checksum_Accumulate_Token_Checksum then if Checksum_GNAT_5_03 then Accumulate_Token_Checksum_GNAT_5_03; else Accumulate_Token_Checksum_GNAT_6_3; end if; end if; else Accumulate_Token_Checksum; Token := Token_Type'Val (Get_Name_Table_Byte (Token_Name)); end if; -- Keyword style checks if Style_Check then -- Deal with possible style check for non-lower case keyword, -- but we don't treat ACCESS, DELTA, DIGITS, RANGE as keywords -- for this purpose if they appear as attribute designators. -- Actually we only check the first character for speed. -- Ada 2005 (AI-284): Do not apply the style check in case of -- "pragma Interface" -- Ada 2005 (AI-340): Do not apply the style check in case of -- MOD attribute. if Source (Token_Ptr) <= 'Z' and then (Prev_Token /= Tok_Apostrophe or else (Token /= Tok_Access and then Token /= Tok_Delta and then Token /= Tok_Digits and then Token /= Tok_Mod and then Token /= Tok_Range)) and then (Token /= Tok_Interface or else (Token = Tok_Interface and then Prev_Token /= Tok_Pragma)) then Style.Non_Lower_Case_Keyword; end if; -- Check THEN/ELSE style rules. These do not apply to AND THEN -- or OR ELSE, and do not apply in conditional expressions. if (Token = Tok_Then and then Prev_Token /= Tok_And) or else (Token = Tok_Else and then Prev_Token /= Tok_Or) then if Inside_Conditional_Expression = 0 then Style.Check_Separate_Stmt_Lines; end if; end if; end if; -- We must reset Token_Name since this is not an identifier and -- if we leave Token_Name set, the parser gets confused because -- it thinks it is dealing with an identifier instead of the -- corresponding keyword. Token_Name := No_Name; return; -- It is an identifier after all else if Checksum_Accumulate_Token_Checksum then Accumulate_Token_Checksum; end if; Post_Scan; return; end if; end Scan; -------------------------- -- Set_Comment_As_Token -- -------------------------- procedure Set_Comment_As_Token (Value : Boolean) is begin Comment_Is_Token := Value; end Set_Comment_As_Token; ------------------------------ -- Set_End_Of_Line_As_Token -- ------------------------------ procedure Set_End_Of_Line_As_Token (Value : Boolean) is begin End_Of_Line_Is_Token := Value; end Set_End_Of_Line_As_Token; --------------------------- -- Set_Special_Character -- --------------------------- procedure Set_Special_Character (C : Character) is begin case C is when '#' | '$' | '_' | '?' | '@' | '`' | '\' | '^' | '~' => Special_Characters (C) := True; when others => null; end case; end Set_Special_Character; ---------------------- -- Set_Start_Column -- ---------------------- -- Note: it seems at first glance a little expensive to compute this value -- for every source line (since it is certainly not used for all source -- lines). On the other hand, it doesn't take much more work to skip past -- the initial white space on the line counting the columns than it would -- to scan past the white space using the standard scanning circuits. function Set_Start_Column return Column_Number is Start_Column : Column_Number := 0; begin -- Outer loop scans past horizontal tab characters Tabs_Loop : loop -- Inner loop scans past blanks as fast as possible, bumping Scan_Ptr -- past the blanks and adjusting Start_Column to account for them. Blanks_Loop : loop if Source (Scan_Ptr) = ' ' then if Source (Scan_Ptr + 1) = ' ' then if Source (Scan_Ptr + 2) = ' ' then if Source (Scan_Ptr + 3) = ' ' then if Source (Scan_Ptr + 4) = ' ' then if Source (Scan_Ptr + 5) = ' ' then if Source (Scan_Ptr + 6) = ' ' then Scan_Ptr := Scan_Ptr + 7; Start_Column := Start_Column + 7; else Scan_Ptr := Scan_Ptr + 6; Start_Column := Start_Column + 6; exit Blanks_Loop; end if; else Scan_Ptr := Scan_Ptr + 5; Start_Column := Start_Column + 5; exit Blanks_Loop; end if; else Scan_Ptr := Scan_Ptr + 4; Start_Column := Start_Column + 4; exit Blanks_Loop; end if; else Scan_Ptr := Scan_Ptr + 3; Start_Column := Start_Column + 3; exit Blanks_Loop; end if; else Scan_Ptr := Scan_Ptr + 2; Start_Column := Start_Column + 2; exit Blanks_Loop; end if; else Scan_Ptr := Scan_Ptr + 1; Start_Column := Start_Column + 1; exit Blanks_Loop; end if; else exit Blanks_Loop; end if; end loop Blanks_Loop; -- Outer loop keeps going only if a horizontal tab follows if Source (Scan_Ptr) = HT then if Style_Check then Style.Check_HT; end if; Scan_Ptr := Scan_Ptr + 1; Start_Column := (Start_Column / 8) * 8 + 8; else exit Tabs_Loop; end if; end loop Tabs_Loop; return Start_Column; -- A constraint error can happen only if we have a compiler with checks on -- and a line with a ludicrous number of tabs or spaces at the start. In -- such a case, we really don't care if Start_Column is right or not. exception when Constraint_Error => return Start_Column; end Set_Start_Column; end Scng;
Go to most recent revision | Compare with Previous | Blame | View Log