URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [sem_ch12.adb] - Rev 821
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S E M _ C H 1 2 -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2012, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Aspects; use Aspects; with Atree; use Atree; with Einfo; use Einfo; with Elists; use Elists; with Errout; use Errout; with Expander; use Expander; with Exp_Disp; use Exp_Disp; with Fname; use Fname; with Fname.UF; use Fname.UF; with Freeze; use Freeze; with Hostparm; with Itypes; use Itypes; with Lib; use Lib; with Lib.Load; use Lib.Load; with Lib.Xref; use Lib.Xref; with Nlists; use Nlists; with Namet; use Namet; with Nmake; use Nmake; with Opt; use Opt; with Rident; use Rident; with Restrict; use Restrict; with Rtsfind; use Rtsfind; with Sem; use Sem; with Sem_Aux; use Sem_Aux; with Sem_Cat; use Sem_Cat; with Sem_Ch3; use Sem_Ch3; with Sem_Ch6; use Sem_Ch6; with Sem_Ch7; use Sem_Ch7; with Sem_Ch8; use Sem_Ch8; with Sem_Ch10; use Sem_Ch10; with Sem_Ch13; use Sem_Ch13; with Sem_Dim; use Sem_Dim; with Sem_Disp; use Sem_Disp; with Sem_Elab; use Sem_Elab; with Sem_Elim; use Sem_Elim; with Sem_Eval; use Sem_Eval; with Sem_Prag; use Sem_Prag; with Sem_Res; use Sem_Res; with Sem_Type; use Sem_Type; with Sem_Util; use Sem_Util; with Sem_Warn; use Sem_Warn; with Stand; use Stand; with Sinfo; use Sinfo; with Sinfo.CN; use Sinfo.CN; with Sinput; use Sinput; with Sinput.L; use Sinput.L; with Snames; use Snames; with Stringt; use Stringt; with Uname; use Uname; with Table; with Tbuild; use Tbuild; with Uintp; use Uintp; with Urealp; use Urealp; with GNAT.HTable; package body Sem_Ch12 is ---------------------------------------------------------- -- Implementation of Generic Analysis and Instantiation -- ---------------------------------------------------------- -- GNAT implements generics by macro expansion. No attempt is made to share -- generic instantiations (for now). Analysis of a generic definition does -- not perform any expansion action, but the expander must be called on the -- tree for each instantiation, because the expansion may of course depend -- on the generic actuals. All of this is best achieved as follows: -- -- a) Semantic analysis of a generic unit is performed on a copy of the -- tree for the generic unit. All tree modifications that follow analysis -- do not affect the original tree. Links are kept between the original -- tree and the copy, in order to recognize non-local references within -- the generic, and propagate them to each instance (recall that name -- resolution is done on the generic declaration: generics are not really -- macros!). This is summarized in the following diagram: -- .-----------. .----------. -- | semantic |<--------------| generic | -- | copy | | unit | -- | |==============>| | -- |___________| global |__________| -- references | | | -- | | | -- .-----|--|. -- | .-----|---. -- | | .----------. -- | | | generic | -- |__| | | -- |__| instance | -- |__________| -- b) Each instantiation copies the original tree, and inserts into it a -- series of declarations that describe the mapping between generic formals -- and actuals. For example, a generic In OUT parameter is an object -- renaming of the corresponding actual, etc. Generic IN parameters are -- constant declarations. -- c) In order to give the right visibility for these renamings, we use -- a different scheme for package and subprogram instantiations. For -- packages, the list of renamings is inserted into the package -- specification, before the visible declarations of the package. The -- renamings are analyzed before any of the text of the instance, and are -- thus visible at the right place. Furthermore, outside of the instance, -- the generic parameters are visible and denote their corresponding -- actuals. -- For subprograms, we create a container package to hold the renamings -- and the subprogram instance itself. Analysis of the package makes the -- renaming declarations visible to the subprogram. After analyzing the -- package, the defining entity for the subprogram is touched-up so that -- it appears declared in the current scope, and not inside the container -- package. -- If the instantiation is a compilation unit, the container package is -- given the same name as the subprogram instance. This ensures that -- the elaboration procedure called by the binder, using the compilation -- unit name, calls in fact the elaboration procedure for the package. -- Not surprisingly, private types complicate this approach. By saving in -- the original generic object the non-local references, we guarantee that -- the proper entities are referenced at the point of instantiation. -- However, for private types, this by itself does not insure that the -- proper VIEW of the entity is used (the full type may be visible at the -- point of generic definition, but not at instantiation, or vice-versa). -- In order to reference the proper view, we special-case any reference -- to private types in the generic object, by saving both views, one in -- the generic and one in the semantic copy. At time of instantiation, we -- check whether the two views are consistent, and exchange declarations if -- necessary, in order to restore the correct visibility. Similarly, if -- the instance view is private when the generic view was not, we perform -- the exchange. After completing the instantiation, we restore the -- current visibility. The flag Has_Private_View marks identifiers in the -- the generic unit that require checking. -- Visibility within nested generic units requires special handling. -- Consider the following scheme: -- type Global is ... -- outside of generic unit. -- generic ... -- package Outer is -- ... -- type Semi_Global is ... -- global to inner. -- generic ... -- 1 -- procedure inner (X1 : Global; X2 : Semi_Global); -- procedure in2 is new inner (...); -- 4 -- end Outer; -- package New_Outer is new Outer (...); -- 2 -- procedure New_Inner is new New_Outer.Inner (...); -- 3 -- The semantic analysis of Outer captures all occurrences of Global. -- The semantic analysis of Inner (at 1) captures both occurrences of -- Global and Semi_Global. -- At point 2 (instantiation of Outer), we also produce a generic copy -- of Inner, even though Inner is, at that point, not being instantiated. -- (This is just part of the semantic analysis of New_Outer). -- Critically, references to Global within Inner must be preserved, while -- references to Semi_Global should not preserved, because they must now -- resolve to an entity within New_Outer. To distinguish between these, we -- use a global variable, Current_Instantiated_Parent, which is set when -- performing a generic copy during instantiation (at 2). This variable is -- used when performing a generic copy that is not an instantiation, but -- that is nested within one, as the occurrence of 1 within 2. The analysis -- of a nested generic only preserves references that are global to the -- enclosing Current_Instantiated_Parent. We use the Scope_Depth value to -- determine whether a reference is external to the given parent. -- The instantiation at point 3 requires no special treatment. The method -- works as well for further nestings of generic units, but of course the -- variable Current_Instantiated_Parent must be stacked because nested -- instantiations can occur, e.g. the occurrence of 4 within 2. -- The instantiation of package and subprogram bodies is handled in a -- similar manner, except that it is delayed until after semantic -- analysis is complete. In this fashion complex cross-dependencies -- between several package declarations and bodies containing generics -- can be compiled which otherwise would diagnose spurious circularities. -- For example, it is possible to compile two packages A and B that -- have the following structure: -- package A is package B is -- generic ... generic ... -- package G_A is package G_B is -- with B; with A; -- package body A is package body B is -- package N_B is new G_B (..) package N_A is new G_A (..) -- The table Pending_Instantiations in package Inline is used to keep -- track of body instantiations that are delayed in this manner. Inline -- handles the actual calls to do the body instantiations. This activity -- is part of Inline, since the processing occurs at the same point, and -- for essentially the same reason, as the handling of inlined routines. ---------------------------------------------- -- Detection of Instantiation Circularities -- ---------------------------------------------- -- If we have a chain of instantiations that is circular, this is static -- error which must be detected at compile time. The detection of these -- circularities is carried out at the point that we insert a generic -- instance spec or body. If there is a circularity, then the analysis of -- the offending spec or body will eventually result in trying to load the -- same unit again, and we detect this problem as we analyze the package -- instantiation for the second time. -- At least in some cases after we have detected the circularity, we get -- into trouble if we try to keep going. The following flag is set if a -- circularity is detected, and used to abandon compilation after the -- messages have been posted. Circularity_Detected : Boolean := False; -- This should really be reset on encountering a new main unit, but in -- practice we are not using multiple main units so it is not critical. ------------------------------------------------- -- Formal packages and partial parametrization -- ------------------------------------------------- -- When compiling a generic, a formal package is a local instantiation. If -- declared with a box, its generic formals are visible in the enclosing -- generic. If declared with a partial list of actuals, those actuals that -- are defaulted (covered by an Others clause, or given an explicit box -- initialization) are also visible in the enclosing generic, while those -- that have a corresponding actual are not. -- In our source model of instantiation, the same visibility must be -- present in the spec and body of an instance: the names of the formals -- that are defaulted must be made visible within the instance, and made -- invisible (hidden) after the instantiation is complete, so that they -- are not accessible outside of the instance. -- In a generic, a formal package is treated like a special instantiation. -- Our Ada 95 compiler handled formals with and without box in different -- ways. With partial parametrization, we use a single model for both. -- We create a package declaration that consists of the specification of -- the generic package, and a set of declarations that map the actuals -- into local renamings, just as we do for bona fide instantiations. For -- defaulted parameters and formals with a box, we copy directly the -- declarations of the formal into this local package. The result is a -- a package whose visible declarations may include generic formals. This -- package is only used for type checking and visibility analysis, and -- never reaches the back-end, so it can freely violate the placement -- rules for generic formal declarations. -- The list of declarations (renamings and copies of formals) is built -- by Analyze_Associations, just as for regular instantiations. -- At the point of instantiation, conformance checking must be applied only -- to those parameters that were specified in the formal. We perform this -- checking by creating another internal instantiation, this one including -- only the renamings and the formals (the rest of the package spec is not -- relevant to conformance checking). We can then traverse two lists: the -- list of actuals in the instance that corresponds to the formal package, -- and the list of actuals produced for this bogus instantiation. We apply -- the conformance rules to those actuals that are not defaulted (i.e. -- which still appear as generic formals. -- When we compile an instance body we must make the right parameters -- visible again. The predicate Is_Generic_Formal indicates which of the -- formals should have its Is_Hidden flag reset. ----------------------- -- Local subprograms -- ----------------------- procedure Abandon_Instantiation (N : Node_Id); pragma No_Return (Abandon_Instantiation); -- Posts an error message "instantiation abandoned" at the indicated node -- and then raises the exception Instantiation_Error to do it. procedure Analyze_Formal_Array_Type (T : in out Entity_Id; Def : Node_Id); -- A formal array type is treated like an array type declaration, and -- invokes Array_Type_Declaration (sem_ch3) whose first parameter is -- in-out, because in the case of an anonymous type the entity is -- actually created in the procedure. -- The following procedures treat other kinds of formal parameters procedure Analyze_Formal_Derived_Interface_Type (N : Node_Id; T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Derived_Type (N : Node_Id; T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Interface_Type (N : Node_Id; T : Entity_Id; Def : Node_Id); -- The following subprograms create abbreviated declarations for formal -- scalar types. We introduce an anonymous base of the proper class for -- each of them, and define the formals as constrained first subtypes of -- their bases. The bounds are expressions that are non-static in the -- generic. procedure Analyze_Formal_Decimal_Fixed_Point_Type (T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Discrete_Type (T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Floating_Type (T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Signed_Integer_Type (T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Modular_Type (T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Ordinary_Fixed_Point_Type (T : Entity_Id; Def : Node_Id); procedure Analyze_Formal_Private_Type (N : Node_Id; T : Entity_Id; Def : Node_Id); -- Creates a new private type, which does not require completion procedure Analyze_Formal_Incomplete_Type (T : Entity_Id; Def : Node_Id); -- Ada 2012: Creates a new incomplete type whose actual does not freeze procedure Analyze_Generic_Formal_Part (N : Node_Id); -- Analyze generic formal part procedure Analyze_Generic_Access_Type (T : Entity_Id; Def : Node_Id); -- Create a new access type with the given designated type function Analyze_Associations (I_Node : Node_Id; Formals : List_Id; F_Copy : List_Id) return List_Id; -- At instantiation time, build the list of associations between formals -- and actuals. Each association becomes a renaming declaration for the -- formal entity. F_Copy is the analyzed list of formals in the generic -- copy. It is used to apply legality checks to the actuals. I_Node is the -- instantiation node itself. procedure Analyze_Subprogram_Instantiation (N : Node_Id; K : Entity_Kind); procedure Build_Instance_Compilation_Unit_Nodes (N : Node_Id; Act_Body : Node_Id; Act_Decl : Node_Id); -- This procedure is used in the case where the generic instance of a -- subprogram body or package body is a library unit. In this case, the -- original library unit node for the generic instantiation must be -- replaced by the resulting generic body, and a link made to a new -- compilation unit node for the generic declaration. The argument N is -- the original generic instantiation. Act_Body and Act_Decl are the body -- and declaration of the instance (either package body and declaration -- nodes or subprogram body and declaration nodes depending on the case). -- On return, the node N has been rewritten with the actual body. procedure Check_Access_Definition (N : Node_Id); -- Subsidiary routine to null exclusion processing. Perform an assertion -- check on Ada version and the presence of an access definition in N. procedure Check_Formal_Packages (P_Id : Entity_Id); -- Apply the following to all formal packages in generic associations procedure Check_Formal_Package_Instance (Formal_Pack : Entity_Id; Actual_Pack : Entity_Id); -- Verify that the actuals of the actual instance match the actuals of -- the template for a formal package that is not declared with a box. procedure Check_Forward_Instantiation (Decl : Node_Id); -- If the generic is a local entity and the corresponding body has not -- been seen yet, flag enclosing packages to indicate that it will be -- elaborated after the generic body. Subprograms declared in the same -- package cannot be inlined by the front-end because front-end inlining -- requires a strict linear order of elaboration. function Check_Hidden_Primitives (Assoc_List : List_Id) return Elist_Id; -- Check if some association between formals and actuals requires to make -- visible primitives of a tagged type, and make those primitives visible. -- Return the list of primitives whose visibility is modified (to restore -- their visibility later through Restore_Hidden_Primitives). If no -- candidate is found then return No_Elist. procedure Check_Hidden_Child_Unit (N : Node_Id; Gen_Unit : Entity_Id; Act_Decl_Id : Entity_Id); -- If the generic unit is an implicit child instance within a parent -- instance, we need to make an explicit test that it is not hidden by -- a child instance of the same name and parent. procedure Check_Generic_Actuals (Instance : Entity_Id; Is_Formal_Box : Boolean); -- Similar to previous one. Check the actuals in the instantiation, -- whose views can change between the point of instantiation and the point -- of instantiation of the body. In addition, mark the generic renamings -- as generic actuals, so that they are not compatible with other actuals. -- Recurse on an actual that is a formal package whose declaration has -- a box. function Contains_Instance_Of (Inner : Entity_Id; Outer : Entity_Id; N : Node_Id) return Boolean; -- Inner is instantiated within the generic Outer. Check whether Inner -- directly or indirectly contains an instance of Outer or of one of its -- parents, in the case of a subunit. Each generic unit holds a list of -- the entities instantiated within (at any depth). This procedure -- determines whether the set of such lists contains a cycle, i.e. an -- illegal circular instantiation. function Denotes_Formal_Package (Pack : Entity_Id; On_Exit : Boolean := False; Instance : Entity_Id := Empty) return Boolean; -- Returns True if E is a formal package of an enclosing generic, or -- the actual for such a formal in an enclosing instantiation. If such -- a package is used as a formal in an nested generic, or as an actual -- in a nested instantiation, the visibility of ITS formals should not -- be modified. When called from within Restore_Private_Views, the flag -- On_Exit is true, to indicate that the search for a possible enclosing -- instance should ignore the current one. In that case Instance denotes -- the declaration for which this is an actual. This declaration may be -- an instantiation in the source, or the internal instantiation that -- corresponds to the actual for a formal package. function Earlier (N1, N2 : Node_Id) return Boolean; -- Yields True if N1 and N2 appear in the same compilation unit, -- ignoring subunits, and if N1 is to the left of N2 in a left-to-right -- traversal of the tree for the unit. Used to determine the placement -- of freeze nodes for instance bodies that may depend on other instances. function Find_Actual_Type (Typ : Entity_Id; Gen_Type : Entity_Id) return Entity_Id; -- When validating the actual types of a child instance, check whether -- the formal is a formal type of the parent unit, and retrieve the current -- actual for it. Typ is the entity in the analyzed formal type declaration -- (component or index type of an array type, or designated type of an -- access formal) and Gen_Type is the enclosing analyzed formal array -- or access type. The desired actual may be a formal of a parent, or may -- be declared in a formal package of a parent. In both cases it is a -- generic actual type because it appears within a visible instance. -- Finally, it may be declared in a parent unit without being a formal -- of that unit, in which case it must be retrieved by visibility. -- Ambiguities may still arise if two homonyms are declared in two formal -- packages, and the prefix of the formal type may be needed to resolve -- the ambiguity in the instance ??? function In_Same_Declarative_Part (F_Node : Node_Id; Inst : Node_Id) return Boolean; -- True if the instantiation Inst and the given freeze_node F_Node appear -- within the same declarative part, ignoring subunits, but with no inter- -- vening subprograms or concurrent units. Used to find the proper plave -- for the freeze node of an instance, when the generic is declared in a -- previous instance. If predicate is true, the freeze node of the instance -- can be placed after the freeze node of the previous instance, Otherwise -- it has to be placed at the end of the current declarative part. function In_Main_Context (E : Entity_Id) return Boolean; -- Check whether an instantiation is in the context of the main unit. -- Used to determine whether its body should be elaborated to allow -- front-end inlining. procedure Set_Instance_Env (Gen_Unit : Entity_Id; Act_Unit : Entity_Id); -- Save current instance on saved environment, to be used to determine -- the global status of entities in nested instances. Part of Save_Env. -- called after verifying that the generic unit is legal for the instance, -- The procedure also examines whether the generic unit is a predefined -- unit, in order to set configuration switches accordingly. As a result -- the procedure must be called after analyzing and freezing the actuals. procedure Set_Instance_Of (A : Entity_Id; B : Entity_Id); -- Associate analyzed generic parameter with corresponding -- instance. Used for semantic checks at instantiation time. function Has_Been_Exchanged (E : Entity_Id) return Boolean; -- Traverse the Exchanged_Views list to see if a type was private -- and has already been flipped during this phase of instantiation. procedure Hide_Current_Scope; -- When instantiating a generic child unit, the parent context must be -- present, but the instance and all entities that may be generated -- must be inserted in the current scope. We leave the current scope -- on the stack, but make its entities invisible to avoid visibility -- problems. This is reversed at the end of the instantiation. This is -- not done for the instantiation of the bodies, which only require the -- instances of the generic parents to be in scope. procedure Install_Body (Act_Body : Node_Id; N : Node_Id; Gen_Body : Node_Id; Gen_Decl : Node_Id); -- If the instantiation happens textually before the body of the generic, -- the instantiation of the body must be analyzed after the generic body, -- and not at the point of instantiation. Such early instantiations can -- happen if the generic and the instance appear in a package declaration -- because the generic body can only appear in the corresponding package -- body. Early instantiations can also appear if generic, instance and -- body are all in the declarative part of a subprogram or entry. Entities -- of packages that are early instantiations are delayed, and their freeze -- node appears after the generic body. procedure Insert_Freeze_Node_For_Instance (N : Node_Id; F_Node : Node_Id); -- N denotes a package or a subprogram instantiation and F_Node is the -- associated freeze node. Insert the freeze node before the first source -- body which follows immediately after N. If no such body is found, the -- freeze node is inserted at the end of the declarative region which -- contains N. procedure Freeze_Subprogram_Body (Inst_Node : Node_Id; Gen_Body : Node_Id; Pack_Id : Entity_Id); -- The generic body may appear textually after the instance, including -- in the proper body of a stub, or within a different package instance. -- Given that the instance can only be elaborated after the generic, we -- place freeze_nodes for the instance and/or for packages that may enclose -- the instance and the generic, so that the back-end can establish the -- proper order of elaboration. procedure Init_Env; -- Establish environment for subsequent instantiation. Separated from -- Save_Env because data-structures for visibility handling must be -- initialized before call to Check_Generic_Child_Unit. procedure Install_Formal_Packages (Par : Entity_Id); -- Install the visible part of any formal of the parent that is a formal -- package. Note that for the case of a formal package with a box, this -- includes the formal part of the formal package (12.7(10/2)). procedure Install_Parent (P : Entity_Id; In_Body : Boolean := False); -- When compiling an instance of a child unit the parent (which is -- itself an instance) is an enclosing scope that must be made -- immediately visible. This procedure is also used to install the non- -- generic parent of a generic child unit when compiling its body, so -- that full views of types in the parent are made visible. procedure Remove_Parent (In_Body : Boolean := False); -- Reverse effect after instantiation of child is complete procedure Install_Hidden_Primitives (Prims_List : in out Elist_Id; Gen_T : Entity_Id; Act_T : Entity_Id); -- Remove suffix 'P' from hidden primitives of Act_T to match the -- visibility of primitives of Gen_T. The list of primitives to which -- the suffix is removed is added to Prims_List to restore them later. procedure Restore_Hidden_Primitives (Prims_List : in out Elist_Id); -- Restore suffix 'P' to primitives of Prims_List and leave Prims_List -- set to No_Elist. procedure Inline_Instance_Body (N : Node_Id; Gen_Unit : Entity_Id; Act_Decl : Node_Id); -- If front-end inlining is requested, instantiate the package body, -- and preserve the visibility of its compilation unit, to insure -- that successive instantiations succeed. -- The functions Instantiate_XXX perform various legality checks and build -- the declarations for instantiated generic parameters. In all of these -- Formal is the entity in the generic unit, Actual is the entity of -- expression in the generic associations, and Analyzed_Formal is the -- formal in the generic copy, which contains the semantic information to -- be used to validate the actual. function Instantiate_Object (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id) return List_Id; function Instantiate_Type (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id; Actual_Decls : List_Id) return List_Id; function Instantiate_Formal_Subprogram (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id) return Node_Id; function Instantiate_Formal_Package (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id) return List_Id; -- If the formal package is declared with a box, special visibility rules -- apply to its formals: they are in the visible part of the package. This -- is true in the declarative region of the formal package, that is to say -- in the enclosing generic or instantiation. For an instantiation, the -- parameters of the formal package are made visible in an explicit step. -- Furthermore, if the actual has a visible USE clause, these formals must -- be made potentially use-visible as well. On exit from the enclosing -- instantiation, the reverse must be done. -- For a formal package declared without a box, there are conformance rules -- that apply to the actuals in the generic declaration and the actuals of -- the actual package in the enclosing instantiation. The simplest way to -- apply these rules is to repeat the instantiation of the formal package -- in the context of the enclosing instance, and compare the generic -- associations of this instantiation with those of the actual package. -- This internal instantiation only needs to contain the renamings of the -- formals: the visible and private declarations themselves need not be -- created. -- In Ada 2005, the formal package may be only partially parameterized. -- In that case the visibility step must make visible those actuals whose -- corresponding formals were given with a box. A final complication -- involves inherited operations from formal derived types, which must -- be visible if the type is. function Is_In_Main_Unit (N : Node_Id) return Boolean; -- Test if given node is in the main unit procedure Load_Parent_Of_Generic (N : Node_Id; Spec : Node_Id; Body_Optional : Boolean := False); -- If the generic appears in a separate non-generic library unit, load the -- corresponding body to retrieve the body of the generic. N is the node -- for the generic instantiation, Spec is the generic package declaration. -- -- Body_Optional is a flag that indicates that the body is being loaded to -- ensure that temporaries are generated consistently when there are other -- instances in the current declarative part that precede the one being -- loaded. In that case a missing body is acceptable. procedure Inherit_Context (Gen_Decl : Node_Id; Inst : Node_Id); -- Add the context clause of the unit containing a generic unit to a -- compilation unit that is, or contains, an instantiation. function Get_Associated_Node (N : Node_Id) return Node_Id; -- In order to propagate semantic information back from the analyzed copy -- to the original generic, we maintain links between selected nodes in the -- generic and their corresponding copies. At the end of generic analysis, -- the routine Save_Global_References traverses the generic tree, examines -- the semantic information, and preserves the links to those nodes that -- contain global information. At instantiation, the information from the -- associated node is placed on the new copy, so that name resolution is -- not repeated. -- -- Three kinds of source nodes have associated nodes: -- -- a) those that can reference (denote) entities, that is identifiers, -- character literals, expanded_names, operator symbols, operators, -- and attribute reference nodes. These nodes have an Entity field -- and are the set of nodes that are in N_Has_Entity. -- -- b) aggregates (N_Aggregate and N_Extension_Aggregate) -- -- c) selected components (N_Selected_Component) -- -- For the first class, the associated node preserves the entity if it is -- global. If the generic contains nested instantiations, the associated -- node itself has been recopied, and a chain of them must be followed. -- -- For aggregates, the associated node allows retrieval of the type, which -- may otherwise not appear in the generic. The view of this type may be -- different between generic and instantiation, and the full view can be -- installed before the instantiation is analyzed. For aggregates of type -- extensions, the same view exchange may have to be performed for some of -- the ancestor types, if their view is private at the point of -- instantiation. -- -- Nodes that are selected components in the parse tree may be rewritten -- as expanded names after resolution, and must be treated as potential -- entity holders, which is why they also have an Associated_Node. -- -- Nodes that do not come from source, such as freeze nodes, do not appear -- in the generic tree, and need not have an associated node. -- -- The associated node is stored in the Associated_Node field. Note that -- this field overlaps Entity, which is fine, because the whole point is -- that we don't need or want the normal Entity field in this situation. procedure Map_Formal_Package_Entities (Form : Entity_Id; Act : Entity_Id); -- Within the generic part, entities in the formal package are -- visible. To validate subsequent type declarations, indicate -- the correspondence between the entities in the analyzed formal, -- and the entities in the actual package. There are three packages -- involved in the instantiation of a formal package: the parent -- generic P1 which appears in the generic declaration, the fake -- instantiation P2 which appears in the analyzed generic, and whose -- visible entities may be used in subsequent formals, and the actual -- P3 in the instance. To validate subsequent formals, me indicate -- that the entities in P2 are mapped into those of P3. The mapping of -- entities has to be done recursively for nested packages. procedure Move_Freeze_Nodes (Out_Of : Entity_Id; After : Node_Id; L : List_Id); -- Freeze nodes can be generated in the analysis of a generic unit, but -- will not be seen by the back-end. It is necessary to move those nodes -- to the enclosing scope if they freeze an outer entity. We place them -- at the end of the enclosing generic package, which is semantically -- neutral. procedure Preanalyze_Actuals (N : Node_Id); -- Analyze actuals to perform name resolution. Full resolution is done -- later, when the expected types are known, but names have to be captured -- before installing parents of generics, that are not visible for the -- actuals themselves. function True_Parent (N : Node_Id) return Node_Id; -- For a subunit, return parent of corresponding stub, else return -- parent of node. procedure Valid_Default_Attribute (Nam : Entity_Id; Def : Node_Id); -- Verify that an attribute that appears as the default for a formal -- subprogram is a function or procedure with the correct profile. ------------------------------------------- -- Data Structures for Generic Renamings -- ------------------------------------------- -- The map Generic_Renamings associates generic entities with their -- corresponding actuals. Currently used to validate type instances. It -- will eventually be used for all generic parameters to eliminate the -- need for overload resolution in the instance. type Assoc_Ptr is new Int; Assoc_Null : constant Assoc_Ptr := -1; type Assoc is record Gen_Id : Entity_Id; Act_Id : Entity_Id; Next_In_HTable : Assoc_Ptr; end record; package Generic_Renamings is new Table.Table (Table_Component_Type => Assoc, Table_Index_Type => Assoc_Ptr, Table_Low_Bound => 0, Table_Initial => 10, Table_Increment => 100, Table_Name => "Generic_Renamings"); -- Variable to hold enclosing instantiation. When the environment is -- saved for a subprogram inlining, the corresponding Act_Id is empty. Current_Instantiated_Parent : Assoc := (Empty, Empty, Assoc_Null); -- Hash table for associations HTable_Size : constant := 37; type HTable_Range is range 0 .. HTable_Size - 1; procedure Set_Next_Assoc (E : Assoc_Ptr; Next : Assoc_Ptr); function Next_Assoc (E : Assoc_Ptr) return Assoc_Ptr; function Get_Gen_Id (E : Assoc_Ptr) return Entity_Id; function Hash (F : Entity_Id) return HTable_Range; package Generic_Renamings_HTable is new GNAT.HTable.Static_HTable ( Header_Num => HTable_Range, Element => Assoc, Elmt_Ptr => Assoc_Ptr, Null_Ptr => Assoc_Null, Set_Next => Set_Next_Assoc, Next => Next_Assoc, Key => Entity_Id, Get_Key => Get_Gen_Id, Hash => Hash, Equal => "="); Exchanged_Views : Elist_Id; -- This list holds the private views that have been exchanged during -- instantiation to restore the visibility of the generic declaration. -- (see comments above). After instantiation, the current visibility is -- reestablished by means of a traversal of this list. Hidden_Entities : Elist_Id; -- This list holds the entities of the current scope that are removed -- from immediate visibility when instantiating a child unit. Their -- visibility is restored in Remove_Parent. -- Because instantiations can be recursive, the following must be saved -- on entry and restored on exit from an instantiation (spec or body). -- This is done by the two procedures Save_Env and Restore_Env. For -- package and subprogram instantiations (but not for the body instances) -- the action of Save_Env is done in two steps: Init_Env is called before -- Check_Generic_Child_Unit, because setting the parent instances requires -- that the visibility data structures be properly initialized. Once the -- generic is unit is validated, Set_Instance_Env completes Save_Env. Parent_Unit_Visible : Boolean := False; -- Parent_Unit_Visible is used when the generic is a child unit, and -- indicates whether the ultimate parent of the generic is visible in the -- instantiation environment. It is used to reset the visibility of the -- parent at the end of the instantiation (see Remove_Parent). Instance_Parent_Unit : Entity_Id := Empty; -- This records the ultimate parent unit of an instance of a generic -- child unit and is used in conjunction with Parent_Unit_Visible to -- indicate the unit to which the Parent_Unit_Visible flag corresponds. type Instance_Env is record Instantiated_Parent : Assoc; Exchanged_Views : Elist_Id; Hidden_Entities : Elist_Id; Current_Sem_Unit : Unit_Number_Type; Parent_Unit_Visible : Boolean := False; Instance_Parent_Unit : Entity_Id := Empty; Switches : Config_Switches_Type; end record; package Instance_Envs is new Table.Table ( Table_Component_Type => Instance_Env, Table_Index_Type => Int, Table_Low_Bound => 0, Table_Initial => 32, Table_Increment => 100, Table_Name => "Instance_Envs"); procedure Restore_Private_Views (Pack_Id : Entity_Id; Is_Package : Boolean := True); -- Restore the private views of external types, and unmark the generic -- renamings of actuals, so that they become compatible subtypes again. -- For subprograms, Pack_Id is the package constructed to hold the -- renamings. procedure Switch_View (T : Entity_Id); -- Switch the partial and full views of a type and its private -- dependents (i.e. its subtypes and derived types). ------------------------------------ -- Structures for Error Reporting -- ------------------------------------ Instantiation_Node : Node_Id; -- Used by subprograms that validate instantiation of formal parameters -- where there might be no actual on which to place the error message. -- Also used to locate the instantiation node for generic subunits. Instantiation_Error : exception; -- When there is a semantic error in the generic parameter matching, -- there is no point in continuing the instantiation, because the -- number of cascaded errors is unpredictable. This exception aborts -- the instantiation process altogether. S_Adjustment : Sloc_Adjustment; -- Offset created for each node in an instantiation, in order to keep -- track of the source position of the instantiation in each of its nodes. -- A subsequent semantic error or warning on a construct of the instance -- points to both places: the original generic node, and the point of -- instantiation. See Sinput and Sinput.L for additional details. ------------------------------------------------------------ -- Data structure for keeping track when inside a Generic -- ------------------------------------------------------------ -- The following table is used to save values of the Inside_A_Generic -- flag (see spec of Sem) when they are saved by Start_Generic. package Generic_Flags is new Table.Table ( Table_Component_Type => Boolean, Table_Index_Type => Int, Table_Low_Bound => 0, Table_Initial => 32, Table_Increment => 200, Table_Name => "Generic_Flags"); --------------------------- -- Abandon_Instantiation -- --------------------------- procedure Abandon_Instantiation (N : Node_Id) is begin Error_Msg_N ("\instantiation abandoned!", N); raise Instantiation_Error; end Abandon_Instantiation; -------------------------- -- Analyze_Associations -- -------------------------- function Analyze_Associations (I_Node : Node_Id; Formals : List_Id; F_Copy : List_Id) return List_Id is Actuals_To_Freeze : constant Elist_Id := New_Elmt_List; Assoc : constant List_Id := New_List; Default_Actuals : constant Elist_Id := New_Elmt_List; Gen_Unit : constant Entity_Id := Defining_Entity (Parent (F_Copy)); Actuals : List_Id; Actual : Node_Id; Analyzed_Formal : Node_Id; First_Named : Node_Id := Empty; Formal : Node_Id; Match : Node_Id; Named : Node_Id; Saved_Formal : Node_Id; Default_Formals : constant List_Id := New_List; -- If an Others_Choice is present, some of the formals may be defaulted. -- To simplify the treatment of visibility in an instance, we introduce -- individual defaults for each such formal. These defaults are -- appended to the list of associations and replace the Others_Choice. Found_Assoc : Node_Id; -- Association for the current formal being match. Empty if there are -- no remaining actuals, or if there is no named association with the -- name of the formal. Is_Named_Assoc : Boolean; Num_Matched : Int := 0; Num_Actuals : Int := 0; Others_Present : Boolean := False; Others_Choice : Node_Id := Empty; -- In Ada 2005, indicates partial parametrization of a formal -- package. As usual an other association must be last in the list. procedure Check_Overloaded_Formal_Subprogram (Formal : Entity_Id); -- Apply RM 12.3 (9): if a formal subprogram is overloaded, the instance -- cannot have a named association for it. AI05-0025 extends this rule -- to formals of formal packages by AI05-0025, and it also applies to -- box-initialized formals. function Has_Fully_Defined_Profile (Subp : Entity_Id) return Boolean; -- Determine whether the parameter types and the return type of Subp -- are fully defined at the point of instantiation. function Matching_Actual (F : Entity_Id; A_F : Entity_Id) return Node_Id; -- Find actual that corresponds to a given a formal parameter. If the -- actuals are positional, return the next one, if any. If the actuals -- are named, scan the parameter associations to find the right one. -- A_F is the corresponding entity in the analyzed generic,which is -- placed on the selector name for ASIS use. -- -- In Ada 2005, a named association may be given with a box, in which -- case Matching_Actual sets Found_Assoc to the generic association, -- but return Empty for the actual itself. In this case the code below -- creates a corresponding declaration for the formal. function Partial_Parametrization return Boolean; -- Ada 2005: if no match is found for a given formal, check if the -- association for it includes a box, or whether the associations -- include an Others clause. procedure Process_Default (F : Entity_Id); -- Add a copy of the declaration of generic formal F to the list of -- associations, and add an explicit box association for F if there -- is none yet, and the default comes from an Others_Choice. function Renames_Standard_Subprogram (Subp : Entity_Id) return Boolean; -- Determine whether Subp renames one of the subprograms defined in the -- generated package Standard. procedure Set_Analyzed_Formal; -- Find the node in the generic copy that corresponds to a given formal. -- The semantic information on this node is used to perform legality -- checks on the actuals. Because semantic analysis can introduce some -- anonymous entities or modify the declaration node itself, the -- correspondence between the two lists is not one-one. In addition to -- anonymous types, the presence a formal equality will introduce an -- implicit declaration for the corresponding inequality. ---------------------------------------- -- Check_Overloaded_Formal_Subprogram -- ---------------------------------------- procedure Check_Overloaded_Formal_Subprogram (Formal : Entity_Id) is Temp_Formal : Entity_Id; begin Temp_Formal := First (Formals); while Present (Temp_Formal) loop if Nkind (Temp_Formal) in N_Formal_Subprogram_Declaration and then Temp_Formal /= Formal and then Chars (Defining_Unit_Name (Specification (Formal))) = Chars (Defining_Unit_Name (Specification (Temp_Formal))) then if Present (Found_Assoc) then Error_Msg_N ("named association not allowed for overloaded formal", Found_Assoc); else Error_Msg_N ("named association not allowed for overloaded formal", Others_Choice); end if; Abandon_Instantiation (Instantiation_Node); end if; Next (Temp_Formal); end loop; end Check_Overloaded_Formal_Subprogram; ------------------------------- -- Has_Fully_Defined_Profile -- ------------------------------- function Has_Fully_Defined_Profile (Subp : Entity_Id) return Boolean is function Is_Fully_Defined_Type (Typ : Entity_Id) return Boolean; -- Determine whethet type Typ is fully defined --------------------------- -- Is_Fully_Defined_Type -- --------------------------- function Is_Fully_Defined_Type (Typ : Entity_Id) return Boolean is begin -- A private type without a full view is not fully defined if Is_Private_Type (Typ) and then No (Full_View (Typ)) then return False; -- An incomplete type is never fully defined elsif Is_Incomplete_Type (Typ) then return False; -- All other types are fully defined else return True; end if; end Is_Fully_Defined_Type; -- Local declarations Param : Entity_Id; -- Start of processing for Has_Fully_Defined_Profile begin -- Check the parameters Param := First_Formal (Subp); while Present (Param) loop if not Is_Fully_Defined_Type (Etype (Param)) then return False; end if; Next_Formal (Param); end loop; -- Check the return type return Is_Fully_Defined_Type (Etype (Subp)); end Has_Fully_Defined_Profile; --------------------- -- Matching_Actual -- --------------------- function Matching_Actual (F : Entity_Id; A_F : Entity_Id) return Node_Id is Prev : Node_Id; Act : Node_Id; begin Is_Named_Assoc := False; -- End of list of purely positional parameters if No (Actual) or else Nkind (Actual) = N_Others_Choice then Found_Assoc := Empty; Act := Empty; -- Case of positional parameter corresponding to current formal elsif No (Selector_Name (Actual)) then Found_Assoc := Actual; Act := Explicit_Generic_Actual_Parameter (Actual); Num_Matched := Num_Matched + 1; Next (Actual); -- Otherwise scan list of named actuals to find the one with the -- desired name. All remaining actuals have explicit names. else Is_Named_Assoc := True; Found_Assoc := Empty; Act := Empty; Prev := Empty; while Present (Actual) loop if Chars (Selector_Name (Actual)) = Chars (F) then Set_Entity (Selector_Name (Actual), A_F); Set_Etype (Selector_Name (Actual), Etype (A_F)); Generate_Reference (A_F, Selector_Name (Actual)); Found_Assoc := Actual; Act := Explicit_Generic_Actual_Parameter (Actual); Num_Matched := Num_Matched + 1; exit; end if; Prev := Actual; Next (Actual); end loop; -- Reset for subsequent searches. In most cases the named -- associations are in order. If they are not, we reorder them -- to avoid scanning twice the same actual. This is not just a -- question of efficiency: there may be multiple defaults with -- boxes that have the same name. In a nested instantiation we -- insert actuals for those defaults, and cannot rely on their -- names to disambiguate them. if Actual = First_Named then Next (First_Named); elsif Present (Actual) then Insert_Before (First_Named, Remove_Next (Prev)); end if; Actual := First_Named; end if; if Is_Entity_Name (Act) and then Present (Entity (Act)) then Set_Used_As_Generic_Actual (Entity (Act)); end if; return Act; end Matching_Actual; ----------------------------- -- Partial_Parametrization -- ----------------------------- function Partial_Parametrization return Boolean is begin return Others_Present or else (Present (Found_Assoc) and then Box_Present (Found_Assoc)); end Partial_Parametrization; --------------------- -- Process_Default -- --------------------- procedure Process_Default (F : Entity_Id) is Loc : constant Source_Ptr := Sloc (I_Node); F_Id : constant Entity_Id := Defining_Entity (F); Decl : Node_Id; Default : Node_Id; Id : Entity_Id; begin -- Append copy of formal declaration to associations, and create new -- defining identifier for it. Decl := New_Copy_Tree (F); Id := Make_Defining_Identifier (Sloc (F_Id), Chars (F_Id)); if Nkind (F) in N_Formal_Subprogram_Declaration then Set_Defining_Unit_Name (Specification (Decl), Id); else Set_Defining_Identifier (Decl, Id); end if; Append (Decl, Assoc); if No (Found_Assoc) then Default := Make_Generic_Association (Loc, Selector_Name => New_Occurrence_Of (Id, Loc), Explicit_Generic_Actual_Parameter => Empty); Set_Box_Present (Default); Append (Default, Default_Formals); end if; end Process_Default; --------------------------------- -- Renames_Standard_Subprogram -- --------------------------------- function Renames_Standard_Subprogram (Subp : Entity_Id) return Boolean is Id : Entity_Id; begin Id := Alias (Subp); while Present (Id) loop if Scope (Id) = Standard_Standard then return True; end if; Id := Alias (Id); end loop; return False; end Renames_Standard_Subprogram; ------------------------- -- Set_Analyzed_Formal -- ------------------------- procedure Set_Analyzed_Formal is Kind : Node_Kind; begin while Present (Analyzed_Formal) loop Kind := Nkind (Analyzed_Formal); case Nkind (Formal) is when N_Formal_Subprogram_Declaration => exit when Kind in N_Formal_Subprogram_Declaration and then Chars (Defining_Unit_Name (Specification (Formal))) = Chars (Defining_Unit_Name (Specification (Analyzed_Formal))); when N_Formal_Package_Declaration => exit when Nkind_In (Kind, N_Formal_Package_Declaration, N_Generic_Package_Declaration, N_Package_Declaration); when N_Use_Package_Clause | N_Use_Type_Clause => exit; when others => -- Skip freeze nodes, and nodes inserted to replace -- unrecognized pragmas. exit when Kind not in N_Formal_Subprogram_Declaration and then not Nkind_In (Kind, N_Subprogram_Declaration, N_Freeze_Entity, N_Null_Statement, N_Itype_Reference) and then Chars (Defining_Identifier (Formal)) = Chars (Defining_Identifier (Analyzed_Formal)); end case; Next (Analyzed_Formal); end loop; end Set_Analyzed_Formal; -- Start of processing for Analyze_Associations begin Actuals := Generic_Associations (I_Node); if Present (Actuals) then -- Check for an Others choice, indicating a partial parametrization -- for a formal package. Actual := First (Actuals); while Present (Actual) loop if Nkind (Actual) = N_Others_Choice then Others_Present := True; Others_Choice := Actual; if Present (Next (Actual)) then Error_Msg_N ("others must be last association", Actual); end if; -- This subprogram is used both for formal packages and for -- instantiations. For the latter, associations must all be -- explicit. if Nkind (I_Node) /= N_Formal_Package_Declaration and then Comes_From_Source (I_Node) then Error_Msg_N ("others association not allowed in an instance", Actual); end if; -- In any case, nothing to do after the others association exit; elsif Box_Present (Actual) and then Comes_From_Source (I_Node) and then Nkind (I_Node) /= N_Formal_Package_Declaration then Error_Msg_N ("box association not allowed in an instance", Actual); end if; Next (Actual); end loop; -- If named associations are present, save first named association -- (it may of course be Empty) to facilitate subsequent name search. First_Named := First (Actuals); while Present (First_Named) and then Nkind (First_Named) /= N_Others_Choice and then No (Selector_Name (First_Named)) loop Num_Actuals := Num_Actuals + 1; Next (First_Named); end loop; end if; Named := First_Named; while Present (Named) loop if Nkind (Named) /= N_Others_Choice and then No (Selector_Name (Named)) then Error_Msg_N ("invalid positional actual after named one", Named); Abandon_Instantiation (Named); end if; -- A named association may lack an actual parameter, if it was -- introduced for a default subprogram that turns out to be local -- to the outer instantiation. if Nkind (Named) /= N_Others_Choice and then Present (Explicit_Generic_Actual_Parameter (Named)) then Num_Actuals := Num_Actuals + 1; end if; Next (Named); end loop; if Present (Formals) then Formal := First_Non_Pragma (Formals); Analyzed_Formal := First_Non_Pragma (F_Copy); if Present (Actuals) then Actual := First (Actuals); -- All formals should have default values else Actual := Empty; end if; while Present (Formal) loop Set_Analyzed_Formal; Saved_Formal := Next_Non_Pragma (Formal); case Nkind (Formal) is when N_Formal_Object_Declaration => Match := Matching_Actual ( Defining_Identifier (Formal), Defining_Identifier (Analyzed_Formal)); if No (Match) and then Partial_Parametrization then Process_Default (Formal); else Append_List (Instantiate_Object (Formal, Match, Analyzed_Formal), Assoc); end if; when N_Formal_Type_Declaration => Match := Matching_Actual ( Defining_Identifier (Formal), Defining_Identifier (Analyzed_Formal)); if No (Match) then if Partial_Parametrization then Process_Default (Formal); else Error_Msg_Sloc := Sloc (Gen_Unit); Error_Msg_NE ("missing actual&", Instantiation_Node, Defining_Identifier (Formal)); Error_Msg_NE ("\in instantiation of & declared#", Instantiation_Node, Gen_Unit); Abandon_Instantiation (Instantiation_Node); end if; else Analyze (Match); Append_List (Instantiate_Type (Formal, Match, Analyzed_Formal, Assoc), Assoc); -- An instantiation is a freeze point for the actuals, -- unless this is a rewritten formal package, or the -- formal is an Ada 2012 formal incomplete type. if Nkind (I_Node) = N_Formal_Package_Declaration or else (Ada_Version >= Ada_2012 and then Ekind (Defining_Identifier (Analyzed_Formal)) = E_Incomplete_Type) then null; else Append_Elmt (Entity (Match), Actuals_To_Freeze); end if; end if; -- A remote access-to-class-wide type is not a legal actual -- for a generic formal of an access type (E.2.2(17/2)). -- In GNAT an exception to this rule is introduced when -- the formal is marked as remote using implementation -- defined aspect/pragma Remote_Access_Type. In that case -- the actual must be remote as well. if Nkind (Analyzed_Formal) = N_Formal_Type_Declaration and then Nkind (Formal_Type_Definition (Analyzed_Formal)) = N_Access_To_Object_Definition then declare Formal_Ent : constant Entity_Id := Defining_Identifier (Analyzed_Formal); begin if Is_Remote_Access_To_Class_Wide_Type (Entity (Match)) = Is_Remote_Types (Formal_Ent) then -- Remoteness of formal and actual match null; elsif Is_Remote_Types (Formal_Ent) then -- Remote formal, non-remote actual Error_Msg_NE ("actual for& must be remote", Match, Formal_Ent); else -- Non-remote formal, remote actual Error_Msg_NE ("actual for& may not be remote", Match, Formal_Ent); end if; end; end if; when N_Formal_Subprogram_Declaration => Match := Matching_Actual (Defining_Unit_Name (Specification (Formal)), Defining_Unit_Name (Specification (Analyzed_Formal))); -- If the formal subprogram has the same name as another -- formal subprogram of the generic, then a named -- association is illegal (12.3(9)). Exclude named -- associations that are generated for a nested instance. if Present (Match) and then Is_Named_Assoc and then Comes_From_Source (Found_Assoc) then Check_Overloaded_Formal_Subprogram (Formal); end if; -- If there is no corresponding actual, this may be case of -- partial parametrization, or else the formal has a default -- or a box. if No (Match) and then Partial_Parametrization then Process_Default (Formal); if Nkind (I_Node) = N_Formal_Package_Declaration then Check_Overloaded_Formal_Subprogram (Formal); end if; else Append_To (Assoc, Instantiate_Formal_Subprogram (Formal, Match, Analyzed_Formal)); -- An instantiation is a freeze point for the actuals, -- unless this is a rewritten formal package. if Nkind (I_Node) /= N_Formal_Package_Declaration and then Nkind (Match) = N_Identifier and then Is_Subprogram (Entity (Match)) -- The actual subprogram may rename a routine defined -- in Standard. Avoid freezing such renamings because -- subprograms coming from Standard cannot be frozen. and then not Renames_Standard_Subprogram (Entity (Match)) -- If the actual subprogram comes from a different -- unit, it is already frozen, either by a body in -- that unit or by the end of the declarative part -- of the unit. This check avoids the freezing of -- subprograms defined in Standard which are used -- as generic actuals. and then In_Same_Code_Unit (Entity (Match), I_Node) and then Has_Fully_Defined_Profile (Entity (Match)) then -- Mark the subprogram as having a delayed freeze -- since this may be an out-of-order action. Set_Has_Delayed_Freeze (Entity (Match)); Append_Elmt (Entity (Match), Actuals_To_Freeze); end if; end if; -- If this is a nested generic, preserve default for later -- instantiations. if No (Match) and then Box_Present (Formal) then Append_Elmt (Defining_Unit_Name (Specification (Last (Assoc))), Default_Actuals); end if; when N_Formal_Package_Declaration => Match := Matching_Actual ( Defining_Identifier (Formal), Defining_Identifier (Original_Node (Analyzed_Formal))); if No (Match) then if Partial_Parametrization then Process_Default (Formal); else Error_Msg_Sloc := Sloc (Gen_Unit); Error_Msg_NE ("missing actual&", Instantiation_Node, Defining_Identifier (Formal)); Error_Msg_NE ("\in instantiation of & declared#", Instantiation_Node, Gen_Unit); Abandon_Instantiation (Instantiation_Node); end if; else Analyze (Match); Append_List (Instantiate_Formal_Package (Formal, Match, Analyzed_Formal), Assoc); end if; -- For use type and use package appearing in the generic part, -- we have already copied them, so we can just move them where -- they belong (we mustn't recopy them since this would mess up -- the Sloc values). when N_Use_Package_Clause | N_Use_Type_Clause => if Nkind (Original_Node (I_Node)) = N_Formal_Package_Declaration then Append (New_Copy_Tree (Formal), Assoc); else Remove (Formal); Append (Formal, Assoc); end if; when others => raise Program_Error; end case; Formal := Saved_Formal; Next_Non_Pragma (Analyzed_Formal); end loop; if Num_Actuals > Num_Matched then Error_Msg_Sloc := Sloc (Gen_Unit); if Present (Selector_Name (Actual)) then Error_Msg_NE ("unmatched actual&", Actual, Selector_Name (Actual)); Error_Msg_NE ("\in instantiation of& declared#", Actual, Gen_Unit); else Error_Msg_NE ("unmatched actual in instantiation of& declared#", Actual, Gen_Unit); end if; end if; elsif Present (Actuals) then Error_Msg_N ("too many actuals in generic instantiation", Instantiation_Node); end if; -- An instantiation freezes all generic actuals. The only exceptions -- to this are incomplete types and subprograms which are not fully -- defined at the point of instantiation. declare Elmt : Elmt_Id := First_Elmt (Actuals_To_Freeze); begin while Present (Elmt) loop Freeze_Before (I_Node, Node (Elmt)); Next_Elmt (Elmt); end loop; end; -- If there are default subprograms, normalize the tree by adding -- explicit associations for them. This is required if the instance -- appears within a generic. declare Elmt : Elmt_Id; Subp : Entity_Id; New_D : Node_Id; begin Elmt := First_Elmt (Default_Actuals); while Present (Elmt) loop if No (Actuals) then Actuals := New_List; Set_Generic_Associations (I_Node, Actuals); end if; Subp := Node (Elmt); New_D := Make_Generic_Association (Sloc (Subp), Selector_Name => New_Occurrence_Of (Subp, Sloc (Subp)), Explicit_Generic_Actual_Parameter => New_Occurrence_Of (Subp, Sloc (Subp))); Mark_Rewrite_Insertion (New_D); Append_To (Actuals, New_D); Next_Elmt (Elmt); end loop; end; -- If this is a formal package, normalize the parameter list by adding -- explicit box associations for the formals that are covered by an -- Others_Choice. if not Is_Empty_List (Default_Formals) then Append_List (Default_Formals, Formals); end if; return Assoc; end Analyze_Associations; ------------------------------- -- Analyze_Formal_Array_Type -- ------------------------------- procedure Analyze_Formal_Array_Type (T : in out Entity_Id; Def : Node_Id) is DSS : Node_Id; begin -- Treated like a non-generic array declaration, with additional -- semantic checks. Enter_Name (T); if Nkind (Def) = N_Constrained_Array_Definition then DSS := First (Discrete_Subtype_Definitions (Def)); while Present (DSS) loop if Nkind_In (DSS, N_Subtype_Indication, N_Range, N_Attribute_Reference) then Error_Msg_N ("only a subtype mark is allowed in a formal", DSS); end if; Next (DSS); end loop; end if; Array_Type_Declaration (T, Def); Set_Is_Generic_Type (Base_Type (T)); if Ekind (Component_Type (T)) = E_Incomplete_Type and then No (Full_View (Component_Type (T))) then Error_Msg_N ("premature usage of incomplete type", Def); -- Check that range constraint is not allowed on the component type -- of a generic formal array type (AARM 12.5.3(3)) elsif Is_Internal (Component_Type (T)) and then Present (Subtype_Indication (Component_Definition (Def))) and then Nkind (Original_Node (Subtype_Indication (Component_Definition (Def)))) = N_Subtype_Indication then Error_Msg_N ("in a formal, a subtype indication can only be " & "a subtype mark (RM 12.5.3(3))", Subtype_Indication (Component_Definition (Def))); end if; end Analyze_Formal_Array_Type; --------------------------------------------- -- Analyze_Formal_Decimal_Fixed_Point_Type -- --------------------------------------------- -- As for other generic types, we create a valid type representation with -- legal but arbitrary attributes, whose values are never considered -- static. For all scalar types we introduce an anonymous base type, with -- the same attributes. We choose the corresponding integer type to be -- Standard_Integer. -- Here and in other similar routines, the Sloc of the generated internal -- type must be the same as the sloc of the defining identifier of the -- formal type declaration, to provide proper source navigation. procedure Analyze_Formal_Decimal_Fixed_Point_Type (T : Entity_Id; Def : Node_Id) is Loc : constant Source_Ptr := Sloc (Def); Base : constant Entity_Id := New_Internal_Entity (E_Decimal_Fixed_Point_Type, Current_Scope, Sloc (Defining_Identifier (Parent (Def))), 'G'); Int_Base : constant Entity_Id := Standard_Integer; Delta_Val : constant Ureal := Ureal_1; Digs_Val : constant Uint := Uint_6; begin Enter_Name (T); Set_Etype (Base, Base); Set_Size_Info (Base, Int_Base); Set_RM_Size (Base, RM_Size (Int_Base)); Set_First_Rep_Item (Base, First_Rep_Item (Int_Base)); Set_Digits_Value (Base, Digs_Val); Set_Delta_Value (Base, Delta_Val); Set_Small_Value (Base, Delta_Val); Set_Scalar_Range (Base, Make_Range (Loc, Low_Bound => Make_Real_Literal (Loc, Ureal_1), High_Bound => Make_Real_Literal (Loc, Ureal_1))); Set_Is_Generic_Type (Base); Set_Parent (Base, Parent (Def)); Set_Ekind (T, E_Decimal_Fixed_Point_Subtype); Set_Etype (T, Base); Set_Size_Info (T, Int_Base); Set_RM_Size (T, RM_Size (Int_Base)); Set_First_Rep_Item (T, First_Rep_Item (Int_Base)); Set_Digits_Value (T, Digs_Val); Set_Delta_Value (T, Delta_Val); Set_Small_Value (T, Delta_Val); Set_Scalar_Range (T, Scalar_Range (Base)); Set_Is_Constrained (T); Check_Restriction (No_Fixed_Point, Def); end Analyze_Formal_Decimal_Fixed_Point_Type; ------------------------------------------- -- Analyze_Formal_Derived_Interface_Type -- ------------------------------------------- procedure Analyze_Formal_Derived_Interface_Type (N : Node_Id; T : Entity_Id; Def : Node_Id) is Loc : constant Source_Ptr := Sloc (Def); begin -- Rewrite as a type declaration of a derived type. This ensures that -- the interface list and primitive operations are properly captured. Rewrite (N, Make_Full_Type_Declaration (Loc, Defining_Identifier => T, Type_Definition => Def)); Analyze (N); Set_Is_Generic_Type (T); end Analyze_Formal_Derived_Interface_Type; --------------------------------- -- Analyze_Formal_Derived_Type -- --------------------------------- procedure Analyze_Formal_Derived_Type (N : Node_Id; T : Entity_Id; Def : Node_Id) is Loc : constant Source_Ptr := Sloc (Def); Unk_Disc : constant Boolean := Unknown_Discriminants_Present (N); New_N : Node_Id; begin Set_Is_Generic_Type (T); if Private_Present (Def) then New_N := Make_Private_Extension_Declaration (Loc, Defining_Identifier => T, Discriminant_Specifications => Discriminant_Specifications (N), Unknown_Discriminants_Present => Unk_Disc, Subtype_Indication => Subtype_Mark (Def), Interface_List => Interface_List (Def)); Set_Abstract_Present (New_N, Abstract_Present (Def)); Set_Limited_Present (New_N, Limited_Present (Def)); Set_Synchronized_Present (New_N, Synchronized_Present (Def)); else New_N := Make_Full_Type_Declaration (Loc, Defining_Identifier => T, Discriminant_Specifications => Discriminant_Specifications (Parent (T)), Type_Definition => Make_Derived_Type_Definition (Loc, Subtype_Indication => Subtype_Mark (Def))); Set_Abstract_Present (Type_Definition (New_N), Abstract_Present (Def)); Set_Limited_Present (Type_Definition (New_N), Limited_Present (Def)); end if; Rewrite (N, New_N); Analyze (N); if Unk_Disc then if not Is_Composite_Type (T) then Error_Msg_N ("unknown discriminants not allowed for elementary types", N); else Set_Has_Unknown_Discriminants (T); Set_Is_Constrained (T, False); end if; end if; -- If the parent type has a known size, so does the formal, which makes -- legal representation clauses that involve the formal. Set_Size_Known_At_Compile_Time (T, Size_Known_At_Compile_Time (Entity (Subtype_Mark (Def)))); end Analyze_Formal_Derived_Type; ---------------------------------- -- Analyze_Formal_Discrete_Type -- ---------------------------------- -- The operations defined for a discrete types are those of an enumeration -- type. The size is set to an arbitrary value, for use in analyzing the -- generic unit. procedure Analyze_Formal_Discrete_Type (T : Entity_Id; Def : Node_Id) is Loc : constant Source_Ptr := Sloc (Def); Lo : Node_Id; Hi : Node_Id; Base : constant Entity_Id := New_Internal_Entity (E_Floating_Point_Type, Current_Scope, Sloc (Defining_Identifier (Parent (Def))), 'G'); begin Enter_Name (T); Set_Ekind (T, E_Enumeration_Subtype); Set_Etype (T, Base); Init_Size (T, 8); Init_Alignment (T); Set_Is_Generic_Type (T); Set_Is_Constrained (T); -- For semantic analysis, the bounds of the type must be set to some -- non-static value. The simplest is to create attribute nodes for those -- bounds, that refer to the type itself. These bounds are never -- analyzed but serve as place-holders. Lo := Make_Attribute_Reference (Loc, Attribute_Name => Name_First, Prefix => New_Reference_To (T, Loc)); Set_Etype (Lo, T); Hi := Make_Attribute_Reference (Loc, Attribute_Name => Name_Last, Prefix => New_Reference_To (T, Loc)); Set_Etype (Hi, T); Set_Scalar_Range (T, Make_Range (Loc, Low_Bound => Lo, High_Bound => Hi)); Set_Ekind (Base, E_Enumeration_Type); Set_Etype (Base, Base); Init_Size (Base, 8); Init_Alignment (Base); Set_Is_Generic_Type (Base); Set_Scalar_Range (Base, Scalar_Range (T)); Set_Parent (Base, Parent (Def)); end Analyze_Formal_Discrete_Type; ---------------------------------- -- Analyze_Formal_Floating_Type -- --------------------------------- procedure Analyze_Formal_Floating_Type (T : Entity_Id; Def : Node_Id) is Base : constant Entity_Id := New_Internal_Entity (E_Floating_Point_Type, Current_Scope, Sloc (Defining_Identifier (Parent (Def))), 'G'); begin -- The various semantic attributes are taken from the predefined type -- Float, just so that all of them are initialized. Their values are -- never used because no constant folding or expansion takes place in -- the generic itself. Enter_Name (T); Set_Ekind (T, E_Floating_Point_Subtype); Set_Etype (T, Base); Set_Size_Info (T, (Standard_Float)); Set_RM_Size (T, RM_Size (Standard_Float)); Set_Digits_Value (T, Digits_Value (Standard_Float)); Set_Scalar_Range (T, Scalar_Range (Standard_Float)); Set_Is_Constrained (T); Set_Is_Generic_Type (Base); Set_Etype (Base, Base); Set_Size_Info (Base, (Standard_Float)); Set_RM_Size (Base, RM_Size (Standard_Float)); Set_Digits_Value (Base, Digits_Value (Standard_Float)); Set_Scalar_Range (Base, Scalar_Range (Standard_Float)); Set_Parent (Base, Parent (Def)); Check_Restriction (No_Floating_Point, Def); end Analyze_Formal_Floating_Type; ----------------------------------- -- Analyze_Formal_Interface_Type;-- ----------------------------------- procedure Analyze_Formal_Interface_Type (N : Node_Id; T : Entity_Id; Def : Node_Id) is Loc : constant Source_Ptr := Sloc (N); New_N : Node_Id; begin New_N := Make_Full_Type_Declaration (Loc, Defining_Identifier => T, Type_Definition => Def); Rewrite (N, New_N); Analyze (N); Set_Is_Generic_Type (T); end Analyze_Formal_Interface_Type; --------------------------------- -- Analyze_Formal_Modular_Type -- --------------------------------- procedure Analyze_Formal_Modular_Type (T : Entity_Id; Def : Node_Id) is begin -- Apart from their entity kind, generic modular types are treated like -- signed integer types, and have the same attributes. Analyze_Formal_Signed_Integer_Type (T, Def); Set_Ekind (T, E_Modular_Integer_Subtype); Set_Ekind (Etype (T), E_Modular_Integer_Type); end Analyze_Formal_Modular_Type; --------------------------------------- -- Analyze_Formal_Object_Declaration -- --------------------------------------- procedure Analyze_Formal_Object_Declaration (N : Node_Id) is E : constant Node_Id := Default_Expression (N); Id : constant Node_Id := Defining_Identifier (N); K : Entity_Kind; T : Node_Id; begin Enter_Name (Id); -- Determine the mode of the formal object if Out_Present (N) then K := E_Generic_In_Out_Parameter; if not In_Present (N) then Error_Msg_N ("formal generic objects cannot have mode OUT", N); end if; else K := E_Generic_In_Parameter; end if; if Present (Subtype_Mark (N)) then Find_Type (Subtype_Mark (N)); T := Entity (Subtype_Mark (N)); -- Verify that there is no redundant null exclusion if Null_Exclusion_Present (N) then if not Is_Access_Type (T) then Error_Msg_N ("null exclusion can only apply to an access type", N); elsif Can_Never_Be_Null (T) then Error_Msg_NE ("`NOT NULL` not allowed (& already excludes null)", N, T); end if; end if; -- Ada 2005 (AI-423): Formal object with an access definition else Check_Access_Definition (N); T := Access_Definition (Related_Nod => N, N => Access_Definition (N)); end if; if Ekind (T) = E_Incomplete_Type then declare Error_Node : Node_Id; begin if Present (Subtype_Mark (N)) then Error_Node := Subtype_Mark (N); else Check_Access_Definition (N); Error_Node := Access_Definition (N); end if; Error_Msg_N ("premature usage of incomplete type", Error_Node); end; end if; if K = E_Generic_In_Parameter then -- Ada 2005 (AI-287): Limited aggregates allowed in generic formals if Ada_Version < Ada_2005 and then Is_Limited_Type (T) then Error_Msg_N ("generic formal of mode IN must not be of limited type", N); Explain_Limited_Type (T, N); end if; if Is_Abstract_Type (T) then Error_Msg_N ("generic formal of mode IN must not be of abstract type", N); end if; if Present (E) then Preanalyze_Spec_Expression (E, T); if Is_Limited_Type (T) and then not OK_For_Limited_Init (T, E) then Error_Msg_N ("initialization not allowed for limited types", E); Explain_Limited_Type (T, E); end if; end if; Set_Ekind (Id, K); Set_Etype (Id, T); -- Case of generic IN OUT parameter else -- If the formal has an unconstrained type, construct its actual -- subtype, as is done for subprogram formals. In this fashion, all -- its uses can refer to specific bounds. Set_Ekind (Id, K); Set_Etype (Id, T); if (Is_Array_Type (T) and then not Is_Constrained (T)) or else (Ekind (T) = E_Record_Type and then Has_Discriminants (T)) then declare Non_Freezing_Ref : constant Node_Id := New_Reference_To (Id, Sloc (Id)); Decl : Node_Id; begin -- Make sure the actual subtype doesn't generate bogus freezing Set_Must_Not_Freeze (Non_Freezing_Ref); Decl := Build_Actual_Subtype (T, Non_Freezing_Ref); Insert_Before_And_Analyze (N, Decl); Set_Actual_Subtype (Id, Defining_Identifier (Decl)); end; else Set_Actual_Subtype (Id, T); end if; if Present (E) then Error_Msg_N ("initialization not allowed for `IN OUT` formals", N); end if; end if; if Has_Aspects (N) then Analyze_Aspect_Specifications (N, Id); end if; end Analyze_Formal_Object_Declaration; ---------------------------------------------- -- Analyze_Formal_Ordinary_Fixed_Point_Type -- ---------------------------------------------- procedure Analyze_Formal_Ordinary_Fixed_Point_Type (T : Entity_Id; Def : Node_Id) is Loc : constant Source_Ptr := Sloc (Def); Base : constant Entity_Id := New_Internal_Entity (E_Ordinary_Fixed_Point_Type, Current_Scope, Sloc (Defining_Identifier (Parent (Def))), 'G'); begin -- The semantic attributes are set for completeness only, their values -- will never be used, since all properties of the type are non-static. Enter_Name (T); Set_Ekind (T, E_Ordinary_Fixed_Point_Subtype); Set_Etype (T, Base); Set_Size_Info (T, Standard_Integer); Set_RM_Size (T, RM_Size (Standard_Integer)); Set_Small_Value (T, Ureal_1); Set_Delta_Value (T, Ureal_1); Set_Scalar_Range (T, Make_Range (Loc, Low_Bound => Make_Real_Literal (Loc, Ureal_1), High_Bound => Make_Real_Literal (Loc, Ureal_1))); Set_Is_Constrained (T); Set_Is_Generic_Type (Base); Set_Etype (Base, Base); Set_Size_Info (Base, Standard_Integer); Set_RM_Size (Base, RM_Size (Standard_Integer)); Set_Small_Value (Base, Ureal_1); Set_Delta_Value (Base, Ureal_1); Set_Scalar_Range (Base, Scalar_Range (T)); Set_Parent (Base, Parent (Def)); Check_Restriction (No_Fixed_Point, Def); end Analyze_Formal_Ordinary_Fixed_Point_Type; ---------------------------------------- -- Analyze_Formal_Package_Declaration -- ---------------------------------------- procedure Analyze_Formal_Package_Declaration (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Pack_Id : constant Entity_Id := Defining_Identifier (N); Formal : Entity_Id; Gen_Id : constant Node_Id := Name (N); Gen_Decl : Node_Id; Gen_Unit : Entity_Id; New_N : Node_Id; Parent_Installed : Boolean := False; Renaming : Node_Id; Parent_Instance : Entity_Id; Renaming_In_Par : Entity_Id; Associations : Boolean := True; Vis_Prims_List : Elist_Id := No_Elist; -- List of primitives made temporarily visible in the instantiation -- to match the visibility of the formal type function Build_Local_Package return Node_Id; -- The formal package is rewritten so that its parameters are replaced -- with corresponding declarations. For parameters with bona fide -- associations these declarations are created by Analyze_Associations -- as for a regular instantiation. For boxed parameters, we preserve -- the formal declarations and analyze them, in order to introduce -- entities of the right kind in the environment of the formal. ------------------------- -- Build_Local_Package -- ------------------------- function Build_Local_Package return Node_Id is Decls : List_Id; Pack_Decl : Node_Id; begin -- Within the formal, the name of the generic package is a renaming -- of the formal (as for a regular instantiation). Pack_Decl := Make_Package_Declaration (Loc, Specification => Copy_Generic_Node (Specification (Original_Node (Gen_Decl)), Empty, Instantiating => True)); Renaming := Make_Package_Renaming_Declaration (Loc, Defining_Unit_Name => Make_Defining_Identifier (Loc, Chars (Gen_Unit)), Name => New_Occurrence_Of (Formal, Loc)); if Nkind (Gen_Id) = N_Identifier and then Chars (Gen_Id) = Chars (Pack_Id) then Error_Msg_NE ("& is hidden within declaration of instance", Gen_Id, Gen_Unit); end if; -- If the formal is declared with a box, or with an others choice, -- create corresponding declarations for all entities in the formal -- part, so that names with the proper types are available in the -- specification of the formal package. -- On the other hand, if there are no associations, then all the -- formals must have defaults, and this will be checked by the -- call to Analyze_Associations. if Box_Present (N) or else Nkind (First (Generic_Associations (N))) = N_Others_Choice then declare Formal_Decl : Node_Id; begin -- TBA : for a formal package, need to recurse ??? Decls := New_List; Formal_Decl := First (Generic_Formal_Declarations (Original_Node (Gen_Decl))); while Present (Formal_Decl) loop Append_To (Decls, Copy_Generic_Node (Formal_Decl, Empty, True)); Next (Formal_Decl); end loop; end; -- If generic associations are present, use Analyze_Associations to -- create the proper renaming declarations. else declare Act_Tree : constant Node_Id := Copy_Generic_Node (Original_Node (Gen_Decl), Empty, Instantiating => True); begin Generic_Renamings.Set_Last (0); Generic_Renamings_HTable.Reset; Instantiation_Node := N; Decls := Analyze_Associations (I_Node => Original_Node (N), Formals => Generic_Formal_Declarations (Act_Tree), F_Copy => Generic_Formal_Declarations (Gen_Decl)); Vis_Prims_List := Check_Hidden_Primitives (Decls); end; end if; Append (Renaming, To => Decls); -- Add generated declarations ahead of local declarations in -- the package. if No (Visible_Declarations (Specification (Pack_Decl))) then Set_Visible_Declarations (Specification (Pack_Decl), Decls); else Insert_List_Before (First (Visible_Declarations (Specification (Pack_Decl))), Decls); end if; return Pack_Decl; end Build_Local_Package; -- Start of processing for Analyze_Formal_Package_Declaration begin Text_IO_Kludge (Gen_Id); Init_Env; Check_Generic_Child_Unit (Gen_Id, Parent_Installed); Gen_Unit := Entity (Gen_Id); -- Check for a formal package that is a package renaming if Present (Renamed_Object (Gen_Unit)) then -- Indicate that unit is used, before replacing it with renamed -- entity for use below. if In_Extended_Main_Source_Unit (N) then Set_Is_Instantiated (Gen_Unit); Generate_Reference (Gen_Unit, N); end if; Gen_Unit := Renamed_Object (Gen_Unit); end if; if Ekind (Gen_Unit) /= E_Generic_Package then Error_Msg_N ("expect generic package name", Gen_Id); Restore_Env; goto Leave; elsif Gen_Unit = Current_Scope then Error_Msg_N ("generic package cannot be used as a formal package of itself", Gen_Id); Restore_Env; goto Leave; elsif In_Open_Scopes (Gen_Unit) then if Is_Compilation_Unit (Gen_Unit) and then Is_Child_Unit (Current_Scope) then -- Special-case the error when the formal is a parent, and -- continue analysis to minimize cascaded errors. Error_Msg_N ("generic parent cannot be used as formal package " & "of a child unit", Gen_Id); else Error_Msg_N ("generic package cannot be used as a formal package " & "within itself", Gen_Id); Restore_Env; goto Leave; end if; end if; -- Check that name of formal package does not hide name of generic, -- or its leading prefix. This check must be done separately because -- the name of the generic has already been analyzed. declare Gen_Name : Entity_Id; begin Gen_Name := Gen_Id; while Nkind (Gen_Name) = N_Expanded_Name loop Gen_Name := Prefix (Gen_Name); end loop; if Chars (Gen_Name) = Chars (Pack_Id) then Error_Msg_NE ("& is hidden within declaration of formal package", Gen_Id, Gen_Name); end if; end; if Box_Present (N) or else No (Generic_Associations (N)) or else Nkind (First (Generic_Associations (N))) = N_Others_Choice then Associations := False; end if; -- If there are no generic associations, the generic parameters appear -- as local entities and are instantiated like them. We copy the generic -- package declaration as if it were an instantiation, and analyze it -- like a regular package, except that we treat the formals as -- additional visible components. Gen_Decl := Unit_Declaration_Node (Gen_Unit); if In_Extended_Main_Source_Unit (N) then Set_Is_Instantiated (Gen_Unit); Generate_Reference (Gen_Unit, N); end if; Formal := New_Copy (Pack_Id); Create_Instantiation_Source (N, Gen_Unit, False, S_Adjustment); begin -- Make local generic without formals. The formals will be replaced -- with internal declarations. New_N := Build_Local_Package; -- If there are errors in the parameter list, Analyze_Associations -- raises Instantiation_Error. Patch the declaration to prevent -- further exception propagation. exception when Instantiation_Error => Enter_Name (Formal); Set_Ekind (Formal, E_Variable); Set_Etype (Formal, Any_Type); Restore_Hidden_Primitives (Vis_Prims_List); if Parent_Installed then Remove_Parent; end if; goto Leave; end; Rewrite (N, New_N); Set_Defining_Unit_Name (Specification (New_N), Formal); Set_Generic_Parent (Specification (N), Gen_Unit); Set_Instance_Env (Gen_Unit, Formal); Set_Is_Generic_Instance (Formal); Enter_Name (Formal); Set_Ekind (Formal, E_Package); Set_Etype (Formal, Standard_Void_Type); Set_Inner_Instances (Formal, New_Elmt_List); Push_Scope (Formal); if Is_Child_Unit (Gen_Unit) and then Parent_Installed then -- Similarly, we have to make the name of the formal visible in the -- parent instance, to resolve properly fully qualified names that -- may appear in the generic unit. The parent instance has been -- placed on the scope stack ahead of the current scope. Parent_Instance := Scope_Stack.Table (Scope_Stack.Last - 1).Entity; Renaming_In_Par := Make_Defining_Identifier (Loc, Chars (Gen_Unit)); Set_Ekind (Renaming_In_Par, E_Package); Set_Etype (Renaming_In_Par, Standard_Void_Type); Set_Scope (Renaming_In_Par, Parent_Instance); Set_Parent (Renaming_In_Par, Parent (Formal)); Set_Renamed_Object (Renaming_In_Par, Formal); Append_Entity (Renaming_In_Par, Parent_Instance); end if; Analyze (Specification (N)); -- The formals for which associations are provided are not visible -- outside of the formal package. The others are still declared by a -- formal parameter declaration. -- If there are no associations, the only local entity to hide is the -- generated package renaming itself. declare E : Entity_Id; begin E := First_Entity (Formal); while Present (E) loop if Associations and then not Is_Generic_Formal (E) then Set_Is_Hidden (E); end if; if Ekind (E) = E_Package and then Renamed_Entity (E) = Formal then Set_Is_Hidden (E); exit; end if; Next_Entity (E); end loop; end; End_Package_Scope (Formal); Restore_Hidden_Primitives (Vis_Prims_List); if Parent_Installed then Remove_Parent; end if; Restore_Env; -- Inside the generic unit, the formal package is a regular package, but -- no body is needed for it. Note that after instantiation, the defining -- unit name we need is in the new tree and not in the original (see -- Package_Instantiation). A generic formal package is an instance, and -- can be used as an actual for an inner instance. Set_Has_Completion (Formal, True); -- Add semantic information to the original defining identifier. -- for ASIS use. Set_Ekind (Pack_Id, E_Package); Set_Etype (Pack_Id, Standard_Void_Type); Set_Scope (Pack_Id, Scope (Formal)); Set_Has_Completion (Pack_Id, True); <<Leave>> if Has_Aspects (N) then Analyze_Aspect_Specifications (N, Pack_Id); end if; end Analyze_Formal_Package_Declaration; --------------------------------- -- Analyze_Formal_Private_Type -- --------------------------------- procedure Analyze_Formal_Private_Type (N : Node_Id; T : Entity_Id; Def : Node_Id) is begin New_Private_Type (N, T, Def); -- Set the size to an arbitrary but legal value Set_Size_Info (T, Standard_Integer); Set_RM_Size (T, RM_Size (Standard_Integer)); end Analyze_Formal_Private_Type; ------------------------------------ -- Analyze_Formal_Incomplete_Type -- ------------------------------------ procedure Analyze_Formal_Incomplete_Type (T : Entity_Id; Def : Node_Id) is begin Enter_Name (T); Set_Ekind (T, E_Incomplete_Type); Set_Etype (T, T); Set_Private_Dependents (T, New_Elmt_List); if Tagged_Present (Def) then Set_Is_Tagged_Type (T); Make_Class_Wide_Type (T); Set_Direct_Primitive_Operations (T, New_Elmt_List); end if; end Analyze_Formal_Incomplete_Type; ---------------------------------------- -- Analyze_Formal_Signed_Integer_Type -- ---------------------------------------- procedure Analyze_Formal_Signed_Integer_Type (T : Entity_Id; Def : Node_Id) is Base : constant Entity_Id := New_Internal_Entity (E_Signed_Integer_Type, Current_Scope, Sloc (Defining_Identifier (Parent (Def))), 'G'); begin Enter_Name (T); Set_Ekind (T, E_Signed_Integer_Subtype); Set_Etype (T, Base); Set_Size_Info (T, Standard_Integer); Set_RM_Size (T, RM_Size (Standard_Integer)); Set_Scalar_Range (T, Scalar_Range (Standard_Integer)); Set_Is_Constrained (T); Set_Is_Generic_Type (Base); Set_Size_Info (Base, Standard_Integer); Set_RM_Size (Base, RM_Size (Standard_Integer)); Set_Etype (Base, Base); Set_Scalar_Range (Base, Scalar_Range (Standard_Integer)); Set_Parent (Base, Parent (Def)); end Analyze_Formal_Signed_Integer_Type; ------------------------------------------- -- Analyze_Formal_Subprogram_Declaration -- ------------------------------------------- procedure Analyze_Formal_Subprogram_Declaration (N : Node_Id) is Spec : constant Node_Id := Specification (N); Def : constant Node_Id := Default_Name (N); Nam : constant Entity_Id := Defining_Unit_Name (Spec); Subp : Entity_Id; begin if Nam = Error then return; end if; if Nkind (Nam) = N_Defining_Program_Unit_Name then Error_Msg_N ("name of formal subprogram must be a direct name", Nam); goto Leave; end if; Analyze_Subprogram_Declaration (N); Set_Is_Formal_Subprogram (Nam); Set_Has_Completion (Nam); if Nkind (N) = N_Formal_Abstract_Subprogram_Declaration then Set_Is_Abstract_Subprogram (Nam); Set_Is_Dispatching_Operation (Nam); declare Ctrl_Type : constant Entity_Id := Find_Dispatching_Type (Nam); begin if No (Ctrl_Type) then Error_Msg_N ("abstract formal subprogram must have a controlling type", N); else Check_Controlling_Formals (Ctrl_Type, Nam); end if; end; end if; -- Default name is resolved at the point of instantiation if Box_Present (N) then null; -- Else default is bound at the point of generic declaration elsif Present (Def) then if Nkind (Def) = N_Operator_Symbol then Find_Direct_Name (Def); elsif Nkind (Def) /= N_Attribute_Reference then Analyze (Def); else -- For an attribute reference, analyze the prefix and verify -- that it has the proper profile for the subprogram. Analyze (Prefix (Def)); Valid_Default_Attribute (Nam, Def); goto Leave; end if; -- Default name may be overloaded, in which case the interpretation -- with the correct profile must be selected, as for a renaming. -- If the definition is an indexed component, it must denote a -- member of an entry family. If it is a selected component, it -- can be a protected operation. if Etype (Def) = Any_Type then goto Leave; elsif Nkind (Def) = N_Selected_Component then if not Is_Overloadable (Entity (Selector_Name (Def))) then Error_Msg_N ("expect valid subprogram name as default", Def); end if; elsif Nkind (Def) = N_Indexed_Component then if Is_Entity_Name (Prefix (Def)) then if Ekind (Entity (Prefix (Def))) /= E_Entry_Family then Error_Msg_N ("expect valid subprogram name as default", Def); end if; elsif Nkind (Prefix (Def)) = N_Selected_Component then if Ekind (Entity (Selector_Name (Prefix (Def)))) /= E_Entry_Family then Error_Msg_N ("expect valid subprogram name as default", Def); end if; else Error_Msg_N ("expect valid subprogram name as default", Def); goto Leave; end if; elsif Nkind (Def) = N_Character_Literal then -- Needs some type checks: subprogram should be parameterless??? Resolve (Def, (Etype (Nam))); elsif not Is_Entity_Name (Def) or else not Is_Overloadable (Entity (Def)) then Error_Msg_N ("expect valid subprogram name as default", Def); goto Leave; elsif not Is_Overloaded (Def) then Subp := Entity (Def); if Subp = Nam then Error_Msg_N ("premature usage of formal subprogram", Def); elsif not Entity_Matches_Spec (Subp, Nam) then Error_Msg_N ("no visible entity matches specification", Def); end if; -- More than one interpretation, so disambiguate as for a renaming else declare I : Interp_Index; I1 : Interp_Index := 0; It : Interp; It1 : Interp; begin Subp := Any_Id; Get_First_Interp (Def, I, It); while Present (It.Nam) loop if Entity_Matches_Spec (It.Nam, Nam) then if Subp /= Any_Id then It1 := Disambiguate (Def, I1, I, Etype (Subp)); if It1 = No_Interp then Error_Msg_N ("ambiguous default subprogram", Def); else Subp := It1.Nam; end if; exit; else I1 := I; Subp := It.Nam; end if; end if; Get_Next_Interp (I, It); end loop; end; if Subp /= Any_Id then -- Subprogram found, generate reference to it Set_Entity (Def, Subp); Generate_Reference (Subp, Def); if Subp = Nam then Error_Msg_N ("premature usage of formal subprogram", Def); elsif Ekind (Subp) /= E_Operator then Check_Mode_Conformant (Subp, Nam); end if; else Error_Msg_N ("no visible subprogram matches specification", N); end if; end if; end if; <<Leave>> if Has_Aspects (N) then Analyze_Aspect_Specifications (N, Nam); end if; end Analyze_Formal_Subprogram_Declaration; ------------------------------------- -- Analyze_Formal_Type_Declaration -- ------------------------------------- procedure Analyze_Formal_Type_Declaration (N : Node_Id) is Def : constant Node_Id := Formal_Type_Definition (N); T : Entity_Id; begin T := Defining_Identifier (N); if Present (Discriminant_Specifications (N)) and then Nkind (Def) /= N_Formal_Private_Type_Definition then Error_Msg_N ("discriminants not allowed for this formal type", T); end if; -- Enter the new name, and branch to specific routine case Nkind (Def) is when N_Formal_Private_Type_Definition => Analyze_Formal_Private_Type (N, T, Def); when N_Formal_Derived_Type_Definition => Analyze_Formal_Derived_Type (N, T, Def); when N_Formal_Incomplete_Type_Definition => Analyze_Formal_Incomplete_Type (T, Def); when N_Formal_Discrete_Type_Definition => Analyze_Formal_Discrete_Type (T, Def); when N_Formal_Signed_Integer_Type_Definition => Analyze_Formal_Signed_Integer_Type (T, Def); when N_Formal_Modular_Type_Definition => Analyze_Formal_Modular_Type (T, Def); when N_Formal_Floating_Point_Definition => Analyze_Formal_Floating_Type (T, Def); when N_Formal_Ordinary_Fixed_Point_Definition => Analyze_Formal_Ordinary_Fixed_Point_Type (T, Def); when N_Formal_Decimal_Fixed_Point_Definition => Analyze_Formal_Decimal_Fixed_Point_Type (T, Def); when N_Array_Type_Definition => Analyze_Formal_Array_Type (T, Def); when N_Access_To_Object_Definition | N_Access_Function_Definition | N_Access_Procedure_Definition => Analyze_Generic_Access_Type (T, Def); -- Ada 2005: a interface declaration is encoded as an abstract -- record declaration or a abstract type derivation. when N_Record_Definition => Analyze_Formal_Interface_Type (N, T, Def); when N_Derived_Type_Definition => Analyze_Formal_Derived_Interface_Type (N, T, Def); when N_Error => null; when others => raise Program_Error; end case; Set_Is_Generic_Type (T); if Has_Aspects (N) then Analyze_Aspect_Specifications (N, T); end if; end Analyze_Formal_Type_Declaration; ------------------------------------ -- Analyze_Function_Instantiation -- ------------------------------------ procedure Analyze_Function_Instantiation (N : Node_Id) is begin Analyze_Subprogram_Instantiation (N, E_Function); end Analyze_Function_Instantiation; --------------------------------- -- Analyze_Generic_Access_Type -- --------------------------------- procedure Analyze_Generic_Access_Type (T : Entity_Id; Def : Node_Id) is begin Enter_Name (T); if Nkind (Def) = N_Access_To_Object_Definition then Access_Type_Declaration (T, Def); if Is_Incomplete_Or_Private_Type (Designated_Type (T)) and then No (Full_View (Designated_Type (T))) and then not Is_Generic_Type (Designated_Type (T)) then Error_Msg_N ("premature usage of incomplete type", Def); elsif not Is_Entity_Name (Subtype_Indication (Def)) then Error_Msg_N ("only a subtype mark is allowed in a formal", Def); end if; else Access_Subprogram_Declaration (T, Def); end if; end Analyze_Generic_Access_Type; --------------------------------- -- Analyze_Generic_Formal_Part -- --------------------------------- procedure Analyze_Generic_Formal_Part (N : Node_Id) is Gen_Parm_Decl : Node_Id; begin -- The generic formals are processed in the scope of the generic unit, -- where they are immediately visible. The scope is installed by the -- caller. Gen_Parm_Decl := First (Generic_Formal_Declarations (N)); while Present (Gen_Parm_Decl) loop Analyze (Gen_Parm_Decl); Next (Gen_Parm_Decl); end loop; Generate_Reference_To_Generic_Formals (Current_Scope); end Analyze_Generic_Formal_Part; ------------------------------------------ -- Analyze_Generic_Package_Declaration -- ------------------------------------------ procedure Analyze_Generic_Package_Declaration (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Id : Entity_Id; New_N : Node_Id; Save_Parent : Node_Id; Renaming : Node_Id; Decls : constant List_Id := Visible_Declarations (Specification (N)); Decl : Node_Id; begin Check_SPARK_Restriction ("generic is not allowed", N); -- We introduce a renaming of the enclosing package, to have a usable -- entity as the prefix of an expanded name for a local entity of the -- form Par.P.Q, where P is the generic package. This is because a local -- entity named P may hide it, so that the usual visibility rules in -- the instance will not resolve properly. Renaming := Make_Package_Renaming_Declaration (Loc, Defining_Unit_Name => Make_Defining_Identifier (Loc, Chars => New_External_Name (Chars (Defining_Entity (N)), "GH")), Name => Make_Identifier (Loc, Chars (Defining_Entity (N)))); if Present (Decls) then Decl := First (Decls); while Present (Decl) and then Nkind (Decl) = N_Pragma loop Next (Decl); end loop; if Present (Decl) then Insert_Before (Decl, Renaming); else Append (Renaming, Visible_Declarations (Specification (N))); end if; else Set_Visible_Declarations (Specification (N), New_List (Renaming)); end if; -- Create copy of generic unit, and save for instantiation. If the unit -- is a child unit, do not copy the specifications for the parent, which -- are not part of the generic tree. Save_Parent := Parent_Spec (N); Set_Parent_Spec (N, Empty); New_N := Copy_Generic_Node (N, Empty, Instantiating => False); Set_Parent_Spec (New_N, Save_Parent); Rewrite (N, New_N); Id := Defining_Entity (N); Generate_Definition (Id); -- Expansion is not applied to generic units Start_Generic; Enter_Name (Id); Set_Ekind (Id, E_Generic_Package); Set_Etype (Id, Standard_Void_Type); Push_Scope (Id); Enter_Generic_Scope (Id); Set_Inner_Instances (Id, New_Elmt_List); Set_Categorization_From_Pragmas (N); Set_Is_Pure (Id, Is_Pure (Current_Scope)); -- Link the declaration of the generic homonym in the generic copy to -- the package it renames, so that it is always resolved properly. Set_Generic_Homonym (Id, Defining_Unit_Name (Renaming)); Set_Entity (Associated_Node (Name (Renaming)), Id); -- For a library unit, we have reconstructed the entity for the unit, -- and must reset it in the library tables. if Nkind (Parent (N)) = N_Compilation_Unit then Set_Cunit_Entity (Current_Sem_Unit, Id); end if; Analyze_Generic_Formal_Part (N); -- After processing the generic formals, analysis proceeds as for a -- non-generic package. Analyze (Specification (N)); Validate_Categorization_Dependency (N, Id); End_Generic; End_Package_Scope (Id); Exit_Generic_Scope (Id); if Nkind (Parent (N)) /= N_Compilation_Unit then Move_Freeze_Nodes (Id, N, Visible_Declarations (Specification (N))); Move_Freeze_Nodes (Id, N, Private_Declarations (Specification (N))); Move_Freeze_Nodes (Id, N, Generic_Formal_Declarations (N)); else Set_Body_Required (Parent (N), Unit_Requires_Body (Id)); Validate_RT_RAT_Component (N); -- If this is a spec without a body, check that generic parameters -- are referenced. if not Body_Required (Parent (N)) then Check_References (Id); end if; end if; if Has_Aspects (N) then Analyze_Aspect_Specifications (N, Id); end if; end Analyze_Generic_Package_Declaration; -------------------------------------------- -- Analyze_Generic_Subprogram_Declaration -- -------------------------------------------- procedure Analyze_Generic_Subprogram_Declaration (N : Node_Id) is Spec : Node_Id; Id : Entity_Id; Formals : List_Id; New_N : Node_Id; Result_Type : Entity_Id; Save_Parent : Node_Id; Typ : Entity_Id; begin Check_SPARK_Restriction ("generic is not allowed", N); -- Create copy of generic unit, and save for instantiation. If the unit -- is a child unit, do not copy the specifications for the parent, which -- are not part of the generic tree. Save_Parent := Parent_Spec (N); Set_Parent_Spec (N, Empty); New_N := Copy_Generic_Node (N, Empty, Instantiating => False); Set_Parent_Spec (New_N, Save_Parent); Rewrite (N, New_N); -- The aspect specifications are not attached to the tree, and must -- be copied and attached to the generic copy explicitly. if Present (Aspect_Specifications (New_N)) then declare Aspects : constant List_Id := Aspect_Specifications (N); begin Set_Has_Aspects (N, False); Move_Aspects (New_N, N); Set_Has_Aspects (Original_Node (N), False); Set_Aspect_Specifications (Original_Node (N), Aspects); end; end if; Spec := Specification (N); Id := Defining_Entity (Spec); Generate_Definition (Id); Set_Contract (Id, Make_Contract (Sloc (Id))); if Nkind (Id) = N_Defining_Operator_Symbol then Error_Msg_N ("operator symbol not allowed for generic subprogram", Id); end if; Start_Generic; Enter_Name (Id); Set_Scope_Depth_Value (Id, Scope_Depth (Current_Scope) + 1); Push_Scope (Id); Enter_Generic_Scope (Id); Set_Inner_Instances (Id, New_Elmt_List); Set_Is_Pure (Id, Is_Pure (Current_Scope)); Analyze_Generic_Formal_Part (N); Formals := Parameter_Specifications (Spec); if Present (Formals) then Process_Formals (Formals, Spec); end if; if Nkind (Spec) = N_Function_Specification then Set_Ekind (Id, E_Generic_Function); if Nkind (Result_Definition (Spec)) = N_Access_Definition then Result_Type := Access_Definition (Spec, Result_Definition (Spec)); Set_Etype (Id, Result_Type); -- Check restriction imposed by AI05-073: a generic function -- cannot return an abstract type or an access to such. -- This is a binding interpretation should it apply to earlier -- versions of Ada as well as Ada 2012??? if Is_Abstract_Type (Designated_Type (Result_Type)) and then Ada_Version >= Ada_2012 then Error_Msg_N ("generic function cannot have an access result" & " that designates an abstract type", Spec); end if; else Find_Type (Result_Definition (Spec)); Typ := Entity (Result_Definition (Spec)); if Is_Abstract_Type (Typ) and then Ada_Version >= Ada_2012 then Error_Msg_N ("generic function cannot have abstract result type", Spec); end if; -- If a null exclusion is imposed on the result type, then create -- a null-excluding itype (an access subtype) and use it as the -- function's Etype. if Is_Access_Type (Typ) and then Null_Exclusion_Present (Spec) then Set_Etype (Id, Create_Null_Excluding_Itype (T => Typ, Related_Nod => Spec, Scope_Id => Defining_Unit_Name (Spec))); else Set_Etype (Id, Typ); end if; end if; else Set_Ekind (Id, E_Generic_Procedure); Set_Etype (Id, Standard_Void_Type); end if; -- For a library unit, we have reconstructed the entity for the unit, -- and must reset it in the library tables. We also make sure that -- Body_Required is set properly in the original compilation unit node. if Nkind (Parent (N)) = N_Compilation_Unit then Set_Cunit_Entity (Current_Sem_Unit, Id); Set_Body_Required (Parent (N), Unit_Requires_Body (Id)); end if; Set_Categorization_From_Pragmas (N); Validate_Categorization_Dependency (N, Id); Save_Global_References (Original_Node (N)); -- For ASIS purposes, convert any postcondition, precondition pragmas -- into aspects, if N is not a compilation unit by itself, in order to -- enable the analysis of expressions inside the corresponding PPC -- pragmas. if ASIS_Mode and then Is_List_Member (N) then Make_Aspect_For_PPC_In_Gen_Sub_Decl (N); end if; -- To capture global references, analyze the expressions of aspects, -- and propagate information to original tree. Note that in this case -- analysis of attributes is not delayed until the freeze point. -- It seems very hard to recreate the proper visibility of the generic -- subprogram at a later point because the analysis of an aspect may -- create pragmas after the generic copies have been made ??? if Has_Aspects (N) then declare Aspect : Node_Id; begin Aspect := First (Aspect_Specifications (N)); while Present (Aspect) loop if Get_Aspect_Id (Chars (Identifier (Aspect))) /= Aspect_Warnings then Analyze (Expression (Aspect)); end if; Next (Aspect); end loop; Aspect := First (Aspect_Specifications (Original_Node (N))); while Present (Aspect) loop Save_Global_References (Expression (Aspect)); Next (Aspect); end loop; end; end if; End_Generic; End_Scope; Exit_Generic_Scope (Id); Generate_Reference_To_Formals (Id); List_Inherited_Pre_Post_Aspects (Id); end Analyze_Generic_Subprogram_Declaration; ----------------------------------- -- Analyze_Package_Instantiation -- ----------------------------------- procedure Analyze_Package_Instantiation (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Gen_Id : constant Node_Id := Name (N); Act_Decl : Node_Id; Act_Decl_Name : Node_Id; Act_Decl_Id : Entity_Id; Act_Spec : Node_Id; Act_Tree : Node_Id; Gen_Decl : Node_Id; Gen_Unit : Entity_Id; Is_Actual_Pack : constant Boolean := Is_Internal (Defining_Entity (N)); Env_Installed : Boolean := False; Parent_Installed : Boolean := False; Renaming_List : List_Id; Unit_Renaming : Node_Id; Needs_Body : Boolean; Inline_Now : Boolean := False; Save_Style_Check : constant Boolean := Style_Check; -- Save style check mode for restore on exit procedure Delay_Descriptors (E : Entity_Id); -- Delay generation of subprogram descriptors for given entity function Might_Inline_Subp return Boolean; -- If inlining is active and the generic contains inlined subprograms, -- we instantiate the body. This may cause superfluous instantiations, -- but it is simpler than detecting the need for the body at the point -- of inlining, when the context of the instance is not available. ----------------------- -- Delay_Descriptors -- ----------------------- procedure Delay_Descriptors (E : Entity_Id) is begin if not Delay_Subprogram_Descriptors (E) then Set_Delay_Subprogram_Descriptors (E); Pending_Descriptor.Append (E); end if; end Delay_Descriptors; ----------------------- -- Might_Inline_Subp -- ----------------------- function Might_Inline_Subp return Boolean is E : Entity_Id; begin if not Inline_Processing_Required then return False; else E := First_Entity (Gen_Unit); while Present (E) loop if Is_Subprogram (E) and then Is_Inlined (E) then return True; end if; Next_Entity (E); end loop; end if; return False; end Might_Inline_Subp; -- Local declarations Vis_Prims_List : Elist_Id := No_Elist; -- List of primitives made temporarily visible in the instantiation -- to match the visibility of the formal type -- Start of processing for Analyze_Package_Instantiation begin Check_SPARK_Restriction ("generic is not allowed", N); -- Very first thing: apply the special kludge for Text_IO processing -- in case we are instantiating one of the children of [Wide_]Text_IO. Text_IO_Kludge (Name (N)); -- Make node global for error reporting Instantiation_Node := N; -- Turn off style checking in instances. If the check is enabled on the -- generic unit, a warning in an instance would just be noise. If not -- enabled on the generic, then a warning in an instance is just wrong. Style_Check := False; -- Case of instantiation of a generic package if Nkind (N) = N_Package_Instantiation then Act_Decl_Id := New_Copy (Defining_Entity (N)); Set_Comes_From_Source (Act_Decl_Id, True); if Nkind (Defining_Unit_Name (N)) = N_Defining_Program_Unit_Name then Act_Decl_Name := Make_Defining_Program_Unit_Name (Loc, Name => New_Copy_Tree (Name (Defining_Unit_Name (N))), Defining_Identifier => Act_Decl_Id); else Act_Decl_Name := Act_Decl_Id; end if; -- Case of instantiation of a formal package else Act_Decl_Id := Defining_Identifier (N); Act_Decl_Name := Act_Decl_Id; end if; Generate_Definition (Act_Decl_Id); Preanalyze_Actuals (N); Init_Env; Env_Installed := True; -- Reset renaming map for formal types. The mapping is established -- when analyzing the generic associations, but some mappings are -- inherited from formal packages of parent units, and these are -- constructed when the parents are installed. Generic_Renamings.Set_Last (0); Generic_Renamings_HTable.Reset; Check_Generic_Child_Unit (Gen_Id, Parent_Installed); Gen_Unit := Entity (Gen_Id); -- Verify that it is the name of a generic package -- A visibility glitch: if the instance is a child unit and the generic -- is the generic unit of a parent instance (i.e. both the parent and -- the child units are instances of the same package) the name now -- denotes the renaming within the parent, not the intended generic -- unit. See if there is a homonym that is the desired generic. The -- renaming declaration must be visible inside the instance of the -- child, but not when analyzing the name in the instantiation itself. if Ekind (Gen_Unit) = E_Package and then Present (Renamed_Entity (Gen_Unit)) and then In_Open_Scopes (Renamed_Entity (Gen_Unit)) and then Is_Generic_Instance (Renamed_Entity (Gen_Unit)) and then Present (Homonym (Gen_Unit)) then Gen_Unit := Homonym (Gen_Unit); end if; if Etype (Gen_Unit) = Any_Type then Restore_Env; goto Leave; elsif Ekind (Gen_Unit) /= E_Generic_Package then -- Ada 2005 (AI-50217): Cannot use instance in limited with_clause if From_With_Type (Gen_Unit) then Error_Msg_N ("cannot instantiate a limited withed package", Gen_Id); else Error_Msg_N ("expect name of generic package in instantiation", Gen_Id); end if; Restore_Env; goto Leave; end if; if In_Extended_Main_Source_Unit (N) then Set_Is_Instantiated (Gen_Unit); Generate_Reference (Gen_Unit, N); if Present (Renamed_Object (Gen_Unit)) then Set_Is_Instantiated (Renamed_Object (Gen_Unit)); Generate_Reference (Renamed_Object (Gen_Unit), N); end if; end if; if Nkind (Gen_Id) = N_Identifier and then Chars (Gen_Unit) = Chars (Defining_Entity (N)) then Error_Msg_NE ("& is hidden within declaration of instance", Gen_Id, Gen_Unit); elsif Nkind (Gen_Id) = N_Expanded_Name and then Is_Child_Unit (Gen_Unit) and then Nkind (Prefix (Gen_Id)) = N_Identifier and then Chars (Act_Decl_Id) = Chars (Prefix (Gen_Id)) then Error_Msg_N ("& is hidden within declaration of instance ", Prefix (Gen_Id)); end if; Set_Entity (Gen_Id, Gen_Unit); -- If generic is a renaming, get original generic unit if Present (Renamed_Object (Gen_Unit)) and then Ekind (Renamed_Object (Gen_Unit)) = E_Generic_Package then Gen_Unit := Renamed_Object (Gen_Unit); end if; -- Verify that there are no circular instantiations if In_Open_Scopes (Gen_Unit) then Error_Msg_NE ("instantiation of & within itself", N, Gen_Unit); Restore_Env; goto Leave; elsif Contains_Instance_Of (Gen_Unit, Current_Scope, Gen_Id) then Error_Msg_Node_2 := Current_Scope; Error_Msg_NE ("circular Instantiation: & instantiated in &!", N, Gen_Unit); Circularity_Detected := True; Restore_Env; goto Leave; else Gen_Decl := Unit_Declaration_Node (Gen_Unit); -- Initialize renamings map, for error checking, and the list that -- holds private entities whose views have changed between generic -- definition and instantiation. If this is the instance created to -- validate an actual package, the instantiation environment is that -- of the enclosing instance. Create_Instantiation_Source (N, Gen_Unit, False, S_Adjustment); -- Copy original generic tree, to produce text for instantiation Act_Tree := Copy_Generic_Node (Original_Node (Gen_Decl), Empty, Instantiating => True); Act_Spec := Specification (Act_Tree); -- If this is the instance created to validate an actual package, -- only the formals matter, do not examine the package spec itself. if Is_Actual_Pack then Set_Visible_Declarations (Act_Spec, New_List); Set_Private_Declarations (Act_Spec, New_List); end if; Renaming_List := Analyze_Associations (I_Node => N, Formals => Generic_Formal_Declarations (Act_Tree), F_Copy => Generic_Formal_Declarations (Gen_Decl)); Vis_Prims_List := Check_Hidden_Primitives (Renaming_List); Set_Instance_Env (Gen_Unit, Act_Decl_Id); Set_Defining_Unit_Name (Act_Spec, Act_Decl_Name); Set_Is_Generic_Instance (Act_Decl_Id); Set_Generic_Parent (Act_Spec, Gen_Unit); -- References to the generic in its own declaration or its body are -- references to the instance. Add a renaming declaration for the -- generic unit itself. This declaration, as well as the renaming -- declarations for the generic formals, must remain private to the -- unit: the formals, because this is the language semantics, and -- the unit because its use is an artifact of the implementation. Unit_Renaming := Make_Package_Renaming_Declaration (Loc, Defining_Unit_Name => Make_Defining_Identifier (Loc, Chars (Gen_Unit)), Name => New_Reference_To (Act_Decl_Id, Loc)); Append (Unit_Renaming, Renaming_List); -- The renaming declarations are the first local declarations of -- the new unit. if Is_Non_Empty_List (Visible_Declarations (Act_Spec)) then Insert_List_Before (First (Visible_Declarations (Act_Spec)), Renaming_List); else Set_Visible_Declarations (Act_Spec, Renaming_List); end if; Act_Decl := Make_Package_Declaration (Loc, Specification => Act_Spec); -- Save the instantiation node, for subsequent instantiation of the -- body, if there is one and we are generating code for the current -- unit. Mark the unit as having a body, to avoid a premature error -- message. -- We instantiate the body if we are generating code, if we are -- generating cross-reference information, or if we are building -- trees for ASIS use. declare Enclosing_Body_Present : Boolean := False; -- If the generic unit is not a compilation unit, then a body may -- be present in its parent even if none is required. We create a -- tentative pending instantiation for the body, which will be -- discarded if none is actually present. Scop : Entity_Id; begin if Scope (Gen_Unit) /= Standard_Standard and then not Is_Child_Unit (Gen_Unit) then Scop := Scope (Gen_Unit); while Present (Scop) and then Scop /= Standard_Standard loop if Unit_Requires_Body (Scop) then Enclosing_Body_Present := True; exit; elsif In_Open_Scopes (Scop) and then In_Package_Body (Scop) then Enclosing_Body_Present := True; exit; end if; exit when Is_Compilation_Unit (Scop); Scop := Scope (Scop); end loop; end if; -- If front-end inlining is enabled, and this is a unit for which -- code will be generated, we instantiate the body at once. -- This is done if the instance is not the main unit, and if the -- generic is not a child unit of another generic, to avoid scope -- problems and the reinstallation of parent instances. if Expander_Active and then (not Is_Child_Unit (Gen_Unit) or else not Is_Generic_Unit (Scope (Gen_Unit))) and then Might_Inline_Subp and then not Is_Actual_Pack then if Front_End_Inlining and then (Is_In_Main_Unit (N) or else In_Main_Context (Current_Scope)) and then Nkind (Parent (N)) /= N_Compilation_Unit then Inline_Now := True; -- In configurable_run_time mode we force the inlining of -- predefined subprograms marked Inline_Always, to minimize -- the use of the run-time library. elsif Is_Predefined_File_Name (Unit_File_Name (Get_Source_Unit (Gen_Decl))) and then Configurable_Run_Time_Mode and then Nkind (Parent (N)) /= N_Compilation_Unit then Inline_Now := True; end if; -- If the current scope is itself an instance within a child -- unit, there will be duplications in the scope stack, and the -- unstacking mechanism in Inline_Instance_Body will fail. -- This loses some rare cases of optimization, and might be -- improved some day, if we can find a proper abstraction for -- "the complete compilation context" that can be saved and -- restored. ??? if Is_Generic_Instance (Current_Scope) then declare Curr_Unit : constant Entity_Id := Cunit_Entity (Current_Sem_Unit); begin if Curr_Unit /= Current_Scope and then Is_Child_Unit (Curr_Unit) then Inline_Now := False; end if; end; end if; end if; Needs_Body := (Unit_Requires_Body (Gen_Unit) or else Enclosing_Body_Present or else Present (Corresponding_Body (Gen_Decl))) and then (Is_In_Main_Unit (N) or else Might_Inline_Subp) and then not Is_Actual_Pack and then not Inline_Now and then not Alfa_Mode and then (Operating_Mode = Generate_Code or else (Operating_Mode = Check_Semantics and then ASIS_Mode)); -- If front_end_inlining is enabled, do not instantiate body if -- within a generic context. if (Front_End_Inlining and then not Expander_Active) or else Is_Generic_Unit (Cunit_Entity (Main_Unit)) then Needs_Body := False; end if; -- If the current context is generic, and the package being -- instantiated is declared within a formal package, there is no -- body to instantiate until the enclosing generic is instantiated -- and there is an actual for the formal package. If the formal -- package has parameters, we build a regular package instance for -- it, that precedes the original formal package declaration. if In_Open_Scopes (Scope (Scope (Gen_Unit))) then declare Decl : constant Node_Id := Original_Node (Unit_Declaration_Node (Scope (Gen_Unit))); begin if Nkind (Decl) = N_Formal_Package_Declaration or else (Nkind (Decl) = N_Package_Declaration and then Is_List_Member (Decl) and then Present (Next (Decl)) and then Nkind (Next (Decl)) = N_Formal_Package_Declaration) then Needs_Body := False; end if; end; end if; end; -- For RCI unit calling stubs, we omit the instance body if the -- instance is the RCI library unit itself. -- However there is a special case for nested instances: in this case -- we do generate the instance body, as it might be required, e.g. -- because it provides stream attributes for some type used in the -- profile of a remote subprogram. This is consistent with 12.3(12), -- which indicates that the instance body occurs at the place of the -- instantiation, and thus is part of the RCI declaration, which is -- present on all client partitions (this is E.2.3(18)). -- Note that AI12-0002 may make it illegal at some point to have -- stream attributes defined in an RCI unit, in which case this -- special case will become unnecessary. In the meantime, there -- is known application code in production that depends on this -- being possible, so we definitely cannot eliminate the body in -- the case of nested instances for the time being. -- When we generate a nested instance body, calling stubs for any -- relevant subprogram will be be inserted immediately after the -- subprogram declarations, and will take precedence over the -- subsequent (original) body. (The stub and original body will be -- complete homographs, but this is permitted in an instance). -- (Could we do better and remove the original body???) if Distribution_Stub_Mode = Generate_Caller_Stub_Body and then Comes_From_Source (N) and then Nkind (Parent (N)) = N_Compilation_Unit then Needs_Body := False; end if; if Needs_Body then -- Here is a defence against a ludicrous number of instantiations -- caused by a circular set of instantiation attempts. if Pending_Instantiations.Last > Hostparm.Max_Instantiations then Error_Msg_N ("too many instantiations", N); raise Unrecoverable_Error; end if; -- Indicate that the enclosing scopes contain an instantiation, -- and that cleanup actions should be delayed until after the -- instance body is expanded. Check_Forward_Instantiation (Gen_Decl); if Nkind (N) = N_Package_Instantiation then declare Enclosing_Master : Entity_Id; begin -- Loop to search enclosing masters Enclosing_Master := Current_Scope; Scope_Loop : while Enclosing_Master /= Standard_Standard loop if Ekind (Enclosing_Master) = E_Package then if Is_Compilation_Unit (Enclosing_Master) then if In_Package_Body (Enclosing_Master) then Delay_Descriptors (Body_Entity (Enclosing_Master)); else Delay_Descriptors (Enclosing_Master); end if; exit Scope_Loop; else Enclosing_Master := Scope (Enclosing_Master); end if; elsif Is_Generic_Unit (Enclosing_Master) or else Ekind (Enclosing_Master) = E_Void then -- Cleanup actions will eventually be performed on the -- enclosing subprogram or package instance, if any. -- Enclosing scope is void in the formal part of a -- generic subprogram. exit Scope_Loop; else if Ekind (Enclosing_Master) = E_Entry and then Ekind (Scope (Enclosing_Master)) = E_Protected_Type then if not Expander_Active then exit Scope_Loop; else Enclosing_Master := Protected_Body_Subprogram (Enclosing_Master); end if; end if; Set_Delay_Cleanups (Enclosing_Master); while Ekind (Enclosing_Master) = E_Block loop Enclosing_Master := Scope (Enclosing_Master); end loop; if Is_Subprogram (Enclosing_Master) then Delay_Descriptors (Enclosing_Master); elsif Is_Task_Type (Enclosing_Master) then declare TBP : constant Node_Id := Get_Task_Body_Procedure (Enclosing_Master); begin if Present (TBP) then Delay_Descriptors (TBP); Set_Delay_Cleanups (TBP); end if; end; end if; exit Scope_Loop; end if; end loop Scope_Loop; end; -- Make entry in table Pending_Instantiations.Append ((Inst_Node => N, Act_Decl => Act_Decl, Expander_Status => Expander_Active, Current_Sem_Unit => Current_Sem_Unit, Scope_Suppress => Scope_Suppress, Local_Suppress_Stack_Top => Local_Suppress_Stack_Top, Version => Ada_Version)); end if; end if; Set_Categorization_From_Pragmas (Act_Decl); if Parent_Installed then Hide_Current_Scope; end if; Set_Instance_Spec (N, Act_Decl); -- If not a compilation unit, insert the package declaration before -- the original instantiation node. if Nkind (Parent (N)) /= N_Compilation_Unit then Mark_Rewrite_Insertion (Act_Decl); Insert_Before (N, Act_Decl); Analyze (Act_Decl); -- For an instantiation that is a compilation unit, place -- declaration on current node so context is complete for analysis -- (including nested instantiations). If this is the main unit, -- the declaration eventually replaces the instantiation node. -- If the instance body is created later, it replaces the -- instance node, and the declaration is attached to it -- (see Build_Instance_Compilation_Unit_Nodes). else if Cunit_Entity (Current_Sem_Unit) = Defining_Entity (N) then -- The entity for the current unit is the newly created one, -- and all semantic information is attached to it. Set_Cunit_Entity (Current_Sem_Unit, Act_Decl_Id); -- If this is the main unit, replace the main entity as well if Current_Sem_Unit = Main_Unit then Main_Unit_Entity := Act_Decl_Id; end if; end if; Set_Unit (Parent (N), Act_Decl); Set_Parent_Spec (Act_Decl, Parent_Spec (N)); Set_Package_Instantiation (Act_Decl_Id, N); Analyze (Act_Decl); Set_Unit (Parent (N), N); Set_Body_Required (Parent (N), False); -- We never need elaboration checks on instantiations, since by -- definition, the body instantiation is elaborated at the same -- time as the spec instantiation. Set_Suppress_Elaboration_Warnings (Act_Decl_Id); Set_Kill_Elaboration_Checks (Act_Decl_Id); end if; Check_Elab_Instantiation (N); if ABE_Is_Certain (N) and then Needs_Body then Pending_Instantiations.Decrement_Last; end if; Check_Hidden_Child_Unit (N, Gen_Unit, Act_Decl_Id); Set_First_Private_Entity (Defining_Unit_Name (Unit_Renaming), First_Private_Entity (Act_Decl_Id)); -- If the instantiation will receive a body, the unit will be -- transformed into a package body, and receive its own elaboration -- entity. Otherwise, the nature of the unit is now a package -- declaration. if Nkind (Parent (N)) = N_Compilation_Unit and then not Needs_Body then Rewrite (N, Act_Decl); end if; if Present (Corresponding_Body (Gen_Decl)) or else Unit_Requires_Body (Gen_Unit) then Set_Has_Completion (Act_Decl_Id); end if; Check_Formal_Packages (Act_Decl_Id); Restore_Hidden_Primitives (Vis_Prims_List); Restore_Private_Views (Act_Decl_Id); Inherit_Context (Gen_Decl, N); if Parent_Installed then Remove_Parent; end if; Restore_Env; Env_Installed := False; end if; Validate_Categorization_Dependency (N, Act_Decl_Id); -- There used to be a check here to prevent instantiations in local -- contexts if the No_Local_Allocators restriction was active. This -- check was removed by a binding interpretation in AI-95-00130/07, -- but we retain the code for documentation purposes. -- if Ekind (Act_Decl_Id) /= E_Void -- and then not Is_Library_Level_Entity (Act_Decl_Id) -- then -- Check_Restriction (No_Local_Allocators, N); -- end if; if Inline_Now then Inline_Instance_Body (N, Gen_Unit, Act_Decl); end if; -- The following is a tree patch for ASIS: ASIS needs separate nodes to -- be used as defining identifiers for a formal package and for the -- corresponding expanded package. if Nkind (N) = N_Formal_Package_Declaration then Act_Decl_Id := New_Copy (Defining_Entity (N)); Set_Comes_From_Source (Act_Decl_Id, True); Set_Is_Generic_Instance (Act_Decl_Id, False); Set_Defining_Identifier (N, Act_Decl_Id); end if; Style_Check := Save_Style_Check; -- Check that if N is an instantiation of System.Dim_Float_IO or -- System.Dim_Integer_IO, the formal type has a dimension system. if Nkind (N) = N_Package_Instantiation and then Is_Dim_IO_Package_Instantiation (N) then declare Assoc : constant Node_Id := First (Generic_Associations (N)); begin if not Has_Dimension_System (Etype (Explicit_Generic_Actual_Parameter (Assoc))) then Error_Msg_N ("type with a dimension system expected", Assoc); end if; end; end if; <<Leave>> if Has_Aspects (N) then Analyze_Aspect_Specifications (N, Act_Decl_Id); end if; exception when Instantiation_Error => if Parent_Installed then Remove_Parent; end if; if Env_Installed then Restore_Env; end if; Style_Check := Save_Style_Check; end Analyze_Package_Instantiation; -------------------------- -- Inline_Instance_Body -- -------------------------- procedure Inline_Instance_Body (N : Node_Id; Gen_Unit : Entity_Id; Act_Decl : Node_Id) is Vis : Boolean; Gen_Comp : constant Entity_Id := Cunit_Entity (Get_Source_Unit (Gen_Unit)); Curr_Comp : constant Node_Id := Cunit (Current_Sem_Unit); Curr_Scope : Entity_Id := Empty; Curr_Unit : constant Entity_Id := Cunit_Entity (Current_Sem_Unit); Removed : Boolean := False; Num_Scopes : Int := 0; Scope_Stack_Depth : constant Int := Scope_Stack.Last - Scope_Stack.First + 1; Use_Clauses : array (1 .. Scope_Stack_Depth) of Node_Id; Instances : array (1 .. Scope_Stack_Depth) of Entity_Id; Inner_Scopes : array (1 .. Scope_Stack_Depth) of Entity_Id; Num_Inner : Int := 0; N_Instances : Int := 0; S : Entity_Id; begin -- Case of generic unit defined in another unit. We must remove the -- complete context of the current unit to install that of the generic. if Gen_Comp /= Cunit_Entity (Current_Sem_Unit) then -- Add some comments for the following two loops ??? S := Current_Scope; while Present (S) and then S /= Standard_Standard loop loop Num_Scopes := Num_Scopes + 1; Use_Clauses (Num_Scopes) := (Scope_Stack.Table (Scope_Stack.Last - Num_Scopes + 1). First_Use_Clause); End_Use_Clauses (Use_Clauses (Num_Scopes)); exit when Scope_Stack.Last - Num_Scopes + 1 = Scope_Stack.First or else Scope_Stack.Table (Scope_Stack.Last - Num_Scopes).Entity = Scope (S); end loop; exit when Is_Generic_Instance (S) and then (In_Package_Body (S) or else Ekind (S) = E_Procedure or else Ekind (S) = E_Function); S := Scope (S); end loop; Vis := Is_Immediately_Visible (Gen_Comp); -- Find and save all enclosing instances S := Current_Scope; while Present (S) and then S /= Standard_Standard loop if Is_Generic_Instance (S) then N_Instances := N_Instances + 1; Instances (N_Instances) := S; exit when In_Package_Body (S); end if; S := Scope (S); end loop; -- Remove context of current compilation unit, unless we are within a -- nested package instantiation, in which case the context has been -- removed previously. -- If current scope is the body of a child unit, remove context of -- spec as well. If an enclosing scope is an instance body, the -- context has already been removed, but the entities in the body -- must be made invisible as well. S := Current_Scope; while Present (S) and then S /= Standard_Standard loop if Is_Generic_Instance (S) and then (In_Package_Body (S) or else Ekind (S) = E_Procedure or else Ekind (S) = E_Function) then -- We still have to remove the entities of the enclosing -- instance from direct visibility. declare E : Entity_Id; begin E := First_Entity (S); while Present (E) loop Set_Is_Immediately_Visible (E, False); Next_Entity (E); end loop; end; exit; end if; if S = Curr_Unit or else (Ekind (Curr_Unit) = E_Package_Body and then S = Spec_Entity (Curr_Unit)) or else (Ekind (Curr_Unit) = E_Subprogram_Body and then S = Corresponding_Spec (Unit_Declaration_Node (Curr_Unit))) then Removed := True; -- Remove entities in current scopes from visibility, so that -- instance body is compiled in a clean environment. Save_Scope_Stack (Handle_Use => False); if Is_Child_Unit (S) then -- Remove child unit from stack, as well as inner scopes. -- Removing the context of a child unit removes parent units -- as well. while Current_Scope /= S loop Num_Inner := Num_Inner + 1; Inner_Scopes (Num_Inner) := Current_Scope; Pop_Scope; end loop; Pop_Scope; Remove_Context (Curr_Comp); Curr_Scope := S; else Remove_Context (Curr_Comp); end if; if Ekind (Curr_Unit) = E_Package_Body then Remove_Context (Library_Unit (Curr_Comp)); end if; end if; S := Scope (S); end loop; pragma Assert (Num_Inner < Num_Scopes); Push_Scope (Standard_Standard); Scope_Stack.Table (Scope_Stack.Last).Is_Active_Stack_Base := True; Instantiate_Package_Body (Body_Info => ((Inst_Node => N, Act_Decl => Act_Decl, Expander_Status => Expander_Active, Current_Sem_Unit => Current_Sem_Unit, Scope_Suppress => Scope_Suppress, Local_Suppress_Stack_Top => Local_Suppress_Stack_Top, Version => Ada_Version)), Inlined_Body => True); Pop_Scope; -- Restore context Set_Is_Immediately_Visible (Gen_Comp, Vis); -- Reset Generic_Instance flag so that use clauses can be installed -- in the proper order. (See Use_One_Package for effect of enclosing -- instances on processing of use clauses). for J in 1 .. N_Instances loop Set_Is_Generic_Instance (Instances (J), False); end loop; if Removed then Install_Context (Curr_Comp); if Present (Curr_Scope) and then Is_Child_Unit (Curr_Scope) then Push_Scope (Curr_Scope); Set_Is_Immediately_Visible (Curr_Scope); -- Finally, restore inner scopes as well for J in reverse 1 .. Num_Inner loop Push_Scope (Inner_Scopes (J)); end loop; end if; Restore_Scope_Stack (Handle_Use => False); if Present (Curr_Scope) and then (In_Private_Part (Curr_Scope) or else In_Package_Body (Curr_Scope)) then -- Install private declaration of ancestor units, which are -- currently available. Restore_Scope_Stack and Install_Context -- only install the visible part of parents. declare Par : Entity_Id; begin Par := Scope (Curr_Scope); while (Present (Par)) and then Par /= Standard_Standard loop Install_Private_Declarations (Par); Par := Scope (Par); end loop; end; end if; end if; -- Restore use clauses. For a child unit, use clauses in the parents -- are restored when installing the context, so only those in inner -- scopes (and those local to the child unit itself) need to be -- installed explicitly. if Is_Child_Unit (Curr_Unit) and then Removed then for J in reverse 1 .. Num_Inner + 1 loop Scope_Stack.Table (Scope_Stack.Last - J + 1).First_Use_Clause := Use_Clauses (J); Install_Use_Clauses (Use_Clauses (J)); end loop; else for J in reverse 1 .. Num_Scopes loop Scope_Stack.Table (Scope_Stack.Last - J + 1).First_Use_Clause := Use_Clauses (J); Install_Use_Clauses (Use_Clauses (J)); end loop; end if; -- Restore status of instances. If one of them is a body, make -- its local entities visible again. declare E : Entity_Id; Inst : Entity_Id; begin for J in 1 .. N_Instances loop Inst := Instances (J); Set_Is_Generic_Instance (Inst, True); if In_Package_Body (Inst) or else Ekind (S) = E_Procedure or else Ekind (S) = E_Function then E := First_Entity (Instances (J)); while Present (E) loop Set_Is_Immediately_Visible (E); Next_Entity (E); end loop; end if; end loop; end; -- If generic unit is in current unit, current context is correct else Instantiate_Package_Body (Body_Info => ((Inst_Node => N, Act_Decl => Act_Decl, Expander_Status => Expander_Active, Current_Sem_Unit => Current_Sem_Unit, Scope_Suppress => Scope_Suppress, Local_Suppress_Stack_Top => Local_Suppress_Stack_Top, Version => Ada_Version)), Inlined_Body => True); end if; end Inline_Instance_Body; ------------------------------------- -- Analyze_Procedure_Instantiation -- ------------------------------------- procedure Analyze_Procedure_Instantiation (N : Node_Id) is begin Analyze_Subprogram_Instantiation (N, E_Procedure); end Analyze_Procedure_Instantiation; ----------------------------------- -- Need_Subprogram_Instance_Body -- ----------------------------------- function Need_Subprogram_Instance_Body (N : Node_Id; Subp : Entity_Id) return Boolean is begin if (Is_In_Main_Unit (N) or else Is_Inlined (Subp) or else Is_Inlined (Alias (Subp))) and then (Operating_Mode = Generate_Code or else (Operating_Mode = Check_Semantics and then ASIS_Mode)) and then (Full_Expander_Active or else ASIS_Mode) and then not ABE_Is_Certain (N) and then not Is_Eliminated (Subp) then Pending_Instantiations.Append ((Inst_Node => N, Act_Decl => Unit_Declaration_Node (Subp), Expander_Status => Expander_Active, Current_Sem_Unit => Current_Sem_Unit, Scope_Suppress => Scope_Suppress, Local_Suppress_Stack_Top => Local_Suppress_Stack_Top, Version => Ada_Version)); return True; else return False; end if; end Need_Subprogram_Instance_Body; -------------------------------------- -- Analyze_Subprogram_Instantiation -- -------------------------------------- procedure Analyze_Subprogram_Instantiation (N : Node_Id; K : Entity_Kind) is Loc : constant Source_Ptr := Sloc (N); Gen_Id : constant Node_Id := Name (N); Anon_Id : constant Entity_Id := Make_Defining_Identifier (Sloc (Defining_Entity (N)), Chars => New_External_Name (Chars (Defining_Entity (N)), 'R')); Act_Decl_Id : Entity_Id; Act_Decl : Node_Id; Act_Spec : Node_Id; Act_Tree : Node_Id; Env_Installed : Boolean := False; Gen_Unit : Entity_Id; Gen_Decl : Node_Id; Pack_Id : Entity_Id; Parent_Installed : Boolean := False; Renaming_List : List_Id; Save_Style_Check : constant Boolean := Style_Check; -- Save style check mode for restore on exit procedure Analyze_Instance_And_Renamings; -- The instance must be analyzed in a context that includes the mappings -- of generic parameters into actuals. We create a package declaration -- for this purpose, and a subprogram with an internal name within the -- package. The subprogram instance is simply an alias for the internal -- subprogram, declared in the current scope. ------------------------------------ -- Analyze_Instance_And_Renamings -- ------------------------------------ procedure Analyze_Instance_And_Renamings is Def_Ent : constant Entity_Id := Defining_Entity (N); Pack_Decl : Node_Id; begin if Nkind (Parent (N)) = N_Compilation_Unit then -- For the case of a compilation unit, the container package has -- the same name as the instantiation, to insure that the binder -- calls the elaboration procedure with the right name. Copy the -- entity of the instance, which may have compilation level flags -- (e.g. Is_Child_Unit) set. Pack_Id := New_Copy (Def_Ent); else -- Otherwise we use the name of the instantiation concatenated -- with its source position to ensure uniqueness if there are -- several instantiations with the same name. Pack_Id := Make_Defining_Identifier (Loc, Chars => New_External_Name (Related_Id => Chars (Def_Ent), Suffix => "GP", Suffix_Index => Source_Offset (Sloc (Def_Ent)))); end if; Pack_Decl := Make_Package_Declaration (Loc, Specification => Make_Package_Specification (Loc, Defining_Unit_Name => Pack_Id, Visible_Declarations => Renaming_List, End_Label => Empty)); Set_Instance_Spec (N, Pack_Decl); Set_Is_Generic_Instance (Pack_Id); Set_Debug_Info_Needed (Pack_Id); -- Case of not a compilation unit if Nkind (Parent (N)) /= N_Compilation_Unit then Mark_Rewrite_Insertion (Pack_Decl); Insert_Before (N, Pack_Decl); Set_Has_Completion (Pack_Id); -- Case of an instantiation that is a compilation unit -- Place declaration on current node so context is complete for -- analysis (including nested instantiations), and for use in a -- context_clause (see Analyze_With_Clause). else Set_Unit (Parent (N), Pack_Decl); Set_Parent_Spec (Pack_Decl, Parent_Spec (N)); end if; Analyze (Pack_Decl); Check_Formal_Packages (Pack_Id); Set_Is_Generic_Instance (Pack_Id, False); -- Why do we clear Is_Generic_Instance??? We set it 20 lines -- above??? -- Body of the enclosing package is supplied when instantiating the -- subprogram body, after semantic analysis is completed. if Nkind (Parent (N)) = N_Compilation_Unit then -- Remove package itself from visibility, so it does not -- conflict with subprogram. Set_Name_Entity_Id (Chars (Pack_Id), Homonym (Pack_Id)); -- Set name and scope of internal subprogram so that the proper -- external name will be generated. The proper scope is the scope -- of the wrapper package. We need to generate debugging info for -- the internal subprogram, so set flag accordingly. Set_Chars (Anon_Id, Chars (Defining_Entity (N))); Set_Scope (Anon_Id, Scope (Pack_Id)); -- Mark wrapper package as referenced, to avoid spurious warnings -- if the instantiation appears in various with_ clauses of -- subunits of the main unit. Set_Referenced (Pack_Id); end if; Set_Is_Generic_Instance (Anon_Id); Set_Debug_Info_Needed (Anon_Id); Act_Decl_Id := New_Copy (Anon_Id); Set_Parent (Act_Decl_Id, Parent (Anon_Id)); Set_Chars (Act_Decl_Id, Chars (Defining_Entity (N))); Set_Sloc (Act_Decl_Id, Sloc (Defining_Entity (N))); Set_Comes_From_Source (Act_Decl_Id, True); -- The signature may involve types that are not frozen yet, but the -- subprogram will be frozen at the point the wrapper package is -- frozen, so it does not need its own freeze node. In fact, if one -- is created, it might conflict with the freezing actions from the -- wrapper package. Set_Has_Delayed_Freeze (Anon_Id, False); -- If the instance is a child unit, mark the Id accordingly. Mark -- the anonymous entity as well, which is the real subprogram and -- which is used when the instance appears in a context clause. -- Similarly, propagate the Is_Eliminated flag to handle properly -- nested eliminated subprograms. Set_Is_Child_Unit (Act_Decl_Id, Is_Child_Unit (Defining_Entity (N))); Set_Is_Child_Unit (Anon_Id, Is_Child_Unit (Defining_Entity (N))); New_Overloaded_Entity (Act_Decl_Id); Check_Eliminated (Act_Decl_Id); Set_Is_Eliminated (Anon_Id, Is_Eliminated (Act_Decl_Id)); -- In compilation unit case, kill elaboration checks on the -- instantiation, since they are never needed -- the body is -- instantiated at the same point as the spec. if Nkind (Parent (N)) = N_Compilation_Unit then Set_Suppress_Elaboration_Warnings (Act_Decl_Id); Set_Kill_Elaboration_Checks (Act_Decl_Id); Set_Is_Compilation_Unit (Anon_Id); Set_Cunit_Entity (Current_Sem_Unit, Pack_Id); end if; -- The instance is not a freezing point for the new subprogram Set_Is_Frozen (Act_Decl_Id, False); if Nkind (Defining_Entity (N)) = N_Defining_Operator_Symbol then Valid_Operator_Definition (Act_Decl_Id); end if; Set_Alias (Act_Decl_Id, Anon_Id); Set_Parent (Act_Decl_Id, Parent (Anon_Id)); Set_Has_Completion (Act_Decl_Id); Set_Related_Instance (Pack_Id, Act_Decl_Id); if Nkind (Parent (N)) = N_Compilation_Unit then Set_Body_Required (Parent (N), False); end if; end Analyze_Instance_And_Renamings; -- Local variables Vis_Prims_List : Elist_Id := No_Elist; -- List of primitives made temporarily visible in the instantiation -- to match the visibility of the formal type -- Start of processing for Analyze_Subprogram_Instantiation begin Check_SPARK_Restriction ("generic is not allowed", N); -- Very first thing: apply the special kludge for Text_IO processing -- in case we are instantiating one of the children of [Wide_]Text_IO. -- Of course such an instantiation is bogus (these are packages, not -- subprograms), but we get a better error message if we do this. Text_IO_Kludge (Gen_Id); -- Make node global for error reporting Instantiation_Node := N; -- Turn off style checking in instances. If the check is enabled on the -- generic unit, a warning in an instance would just be noise. If not -- enabled on the generic, then a warning in an instance is just wrong. Style_Check := False; Preanalyze_Actuals (N); Init_Env; Env_Installed := True; Check_Generic_Child_Unit (Gen_Id, Parent_Installed); Gen_Unit := Entity (Gen_Id); Generate_Reference (Gen_Unit, Gen_Id); if Nkind (Gen_Id) = N_Identifier and then Chars (Gen_Unit) = Chars (Defining_Entity (N)) then Error_Msg_NE ("& is hidden within declaration of instance", Gen_Id, Gen_Unit); end if; if Etype (Gen_Unit) = Any_Type then Restore_Env; return; end if; -- Verify that it is a generic subprogram of the right kind, and that -- it does not lead to a circular instantiation. if not Ekind_In (Gen_Unit, E_Generic_Procedure, E_Generic_Function) then Error_Msg_N ("expect generic subprogram in instantiation", Gen_Id); elsif In_Open_Scopes (Gen_Unit) then Error_Msg_NE ("instantiation of & within itself", N, Gen_Unit); elsif K = E_Procedure and then Ekind (Gen_Unit) /= E_Generic_Procedure then if Ekind (Gen_Unit) = E_Generic_Function then Error_Msg_N ("cannot instantiate generic function as procedure", Gen_Id); else Error_Msg_N ("expect name of generic procedure in instantiation", Gen_Id); end if; elsif K = E_Function and then Ekind (Gen_Unit) /= E_Generic_Function then if Ekind (Gen_Unit) = E_Generic_Procedure then Error_Msg_N ("cannot instantiate generic procedure as function", Gen_Id); else Error_Msg_N ("expect name of generic function in instantiation", Gen_Id); end if; else Set_Entity (Gen_Id, Gen_Unit); Set_Is_Instantiated (Gen_Unit); if In_Extended_Main_Source_Unit (N) then Generate_Reference (Gen_Unit, N); end if; -- If renaming, get original unit if Present (Renamed_Object (Gen_Unit)) and then (Ekind (Renamed_Object (Gen_Unit)) = E_Generic_Procedure or else Ekind (Renamed_Object (Gen_Unit)) = E_Generic_Function) then Gen_Unit := Renamed_Object (Gen_Unit); Set_Is_Instantiated (Gen_Unit); Generate_Reference (Gen_Unit, N); end if; if Contains_Instance_Of (Gen_Unit, Current_Scope, Gen_Id) then Error_Msg_Node_2 := Current_Scope; Error_Msg_NE ("circular Instantiation: & instantiated in &!", N, Gen_Unit); Circularity_Detected := True; Restore_Hidden_Primitives (Vis_Prims_List); goto Leave; end if; Gen_Decl := Unit_Declaration_Node (Gen_Unit); -- Initialize renamings map, for error checking Generic_Renamings.Set_Last (0); Generic_Renamings_HTable.Reset; Create_Instantiation_Source (N, Gen_Unit, False, S_Adjustment); -- Copy original generic tree, to produce text for instantiation Act_Tree := Copy_Generic_Node (Original_Node (Gen_Decl), Empty, Instantiating => True); -- Inherit overriding indicator from instance node Act_Spec := Specification (Act_Tree); Set_Must_Override (Act_Spec, Must_Override (N)); Set_Must_Not_Override (Act_Spec, Must_Not_Override (N)); Renaming_List := Analyze_Associations (I_Node => N, Formals => Generic_Formal_Declarations (Act_Tree), F_Copy => Generic_Formal_Declarations (Gen_Decl)); Vis_Prims_List := Check_Hidden_Primitives (Renaming_List); -- The subprogram itself cannot contain a nested instance, so the -- current parent is left empty. Set_Instance_Env (Gen_Unit, Empty); -- Build the subprogram declaration, which does not appear in the -- generic template, and give it a sloc consistent with that of the -- template. Set_Defining_Unit_Name (Act_Spec, Anon_Id); Set_Generic_Parent (Act_Spec, Gen_Unit); Act_Decl := Make_Subprogram_Declaration (Sloc (Act_Spec), Specification => Act_Spec); -- The aspects have been copied previously, but they have to be -- linked explicitly to the new subprogram declaration. Explicit -- pre/postconditions on the instance are analyzed below, in a -- separate step. Move_Aspects (Act_Tree, Act_Decl); Set_Categorization_From_Pragmas (Act_Decl); if Parent_Installed then Hide_Current_Scope; end if; Append (Act_Decl, Renaming_List); Analyze_Instance_And_Renamings; -- If the generic is marked Import (Intrinsic), then so is the -- instance. This indicates that there is no body to instantiate. If -- generic is marked inline, so it the instance, and the anonymous -- subprogram it renames. If inlined, or else if inlining is enabled -- for the compilation, we generate the instance body even if it is -- not within the main unit. if Is_Intrinsic_Subprogram (Gen_Unit) then Set_Is_Intrinsic_Subprogram (Anon_Id); Set_Is_Intrinsic_Subprogram (Act_Decl_Id); if Chars (Gen_Unit) = Name_Unchecked_Conversion then Validate_Unchecked_Conversion (N, Act_Decl_Id); end if; end if; -- Inherit convention from generic unit. Intrinsic convention, as for -- an instance of unchecked conversion, is not inherited because an -- explicit Ada instance has been created. if Has_Convention_Pragma (Gen_Unit) and then Convention (Gen_Unit) /= Convention_Intrinsic then Set_Convention (Act_Decl_Id, Convention (Gen_Unit)); Set_Is_Exported (Act_Decl_Id, Is_Exported (Gen_Unit)); end if; Generate_Definition (Act_Decl_Id); -- Set_Contract (Anon_Id, Make_Contract (Sloc (Anon_Id))); -- ??? needed? Set_Contract (Act_Decl_Id, Make_Contract (Sloc (Act_Decl_Id))); -- Inherit all inlining-related flags which apply to the generic in -- the subprogram and its declaration. Set_Is_Inlined (Act_Decl_Id, Is_Inlined (Gen_Unit)); Set_Is_Inlined (Anon_Id, Is_Inlined (Gen_Unit)); Set_Has_Pragma_Inline (Act_Decl_Id, Has_Pragma_Inline (Gen_Unit)); Set_Has_Pragma_Inline (Anon_Id, Has_Pragma_Inline (Gen_Unit)); Set_Has_Pragma_Inline_Always (Act_Decl_Id, Has_Pragma_Inline_Always (Gen_Unit)); Set_Has_Pragma_Inline_Always (Anon_Id, Has_Pragma_Inline_Always (Gen_Unit)); if not Is_Intrinsic_Subprogram (Gen_Unit) then Check_Elab_Instantiation (N); end if; if Is_Dispatching_Operation (Act_Decl_Id) and then Ada_Version >= Ada_2005 then declare Formal : Entity_Id; begin Formal := First_Formal (Act_Decl_Id); while Present (Formal) loop if Ekind (Etype (Formal)) = E_Anonymous_Access_Type and then Is_Controlling_Formal (Formal) and then not Can_Never_Be_Null (Formal) then Error_Msg_NE ("access parameter& is controlling,", N, Formal); Error_Msg_NE ("\corresponding parameter of & must be" & " explicitly null-excluding", N, Gen_Id); end if; Next_Formal (Formal); end loop; end; end if; Check_Hidden_Child_Unit (N, Gen_Unit, Act_Decl_Id); Validate_Categorization_Dependency (N, Act_Decl_Id); if not Is_Intrinsic_Subprogram (Act_Decl_Id) then Inherit_Context (Gen_Decl, N); Restore_Private_Views (Pack_Id, False); -- If the context requires a full instantiation, mark node for -- subsequent construction of the body. if Need_Subprogram_Instance_Body (N, Act_Decl_Id) then Check_Forward_Instantiation (Gen_Decl); -- The wrapper package is always delayed, because it does not -- constitute a freeze point, but to insure that the freeze -- node is placed properly, it is created directly when -- instantiating the body (otherwise the freeze node might -- appear to early for nested instantiations). elsif Nkind (Parent (N)) = N_Compilation_Unit then -- For ASIS purposes, indicate that the wrapper package has -- replaced the instantiation node. Rewrite (N, Unit (Parent (N))); Set_Unit (Parent (N), N); end if; elsif Nkind (Parent (N)) = N_Compilation_Unit then -- Replace instance node for library-level instantiations of -- intrinsic subprograms, for ASIS use. Rewrite (N, Unit (Parent (N))); Set_Unit (Parent (N), N); end if; if Parent_Installed then Remove_Parent; end if; Restore_Hidden_Primitives (Vis_Prims_List); Restore_Env; Env_Installed := False; Generic_Renamings.Set_Last (0); Generic_Renamings_HTable.Reset; end if; Style_Check := Save_Style_Check; <<Leave>> if Has_Aspects (N) then Analyze_Aspect_Specifications (N, Act_Decl_Id); end if; exception when Instantiation_Error => if Parent_Installed then Remove_Parent; end if; if Env_Installed then Restore_Env; end if; Style_Check := Save_Style_Check; end Analyze_Subprogram_Instantiation; ------------------------- -- Get_Associated_Node -- ------------------------- function Get_Associated_Node (N : Node_Id) return Node_Id is Assoc : Node_Id; begin Assoc := Associated_Node (N); if Nkind (Assoc) /= Nkind (N) then return Assoc; elsif Nkind_In (Assoc, N_Aggregate, N_Extension_Aggregate) then return Assoc; else -- If the node is part of an inner generic, it may itself have been -- remapped into a further generic copy. Associated_Node is otherwise -- used for the entity of the node, and will be of a different node -- kind, or else N has been rewritten as a literal or function call. while Present (Associated_Node (Assoc)) and then Nkind (Associated_Node (Assoc)) = Nkind (Assoc) loop Assoc := Associated_Node (Assoc); end loop; -- Follow and additional link in case the final node was rewritten. -- This can only happen with nested generic units. if (Nkind (Assoc) = N_Identifier or else Nkind (Assoc) in N_Op) and then Present (Associated_Node (Assoc)) and then (Nkind_In (Associated_Node (Assoc), N_Function_Call, N_Explicit_Dereference, N_Integer_Literal, N_Real_Literal, N_String_Literal)) then Assoc := Associated_Node (Assoc); end if; return Assoc; end if; end Get_Associated_Node; ------------------------------------------- -- Build_Instance_Compilation_Unit_Nodes -- ------------------------------------------- procedure Build_Instance_Compilation_Unit_Nodes (N : Node_Id; Act_Body : Node_Id; Act_Decl : Node_Id) is Decl_Cunit : Node_Id; Body_Cunit : Node_Id; Citem : Node_Id; New_Main : constant Entity_Id := Defining_Entity (Act_Decl); Old_Main : constant Entity_Id := Cunit_Entity (Main_Unit); begin -- A new compilation unit node is built for the instance declaration Decl_Cunit := Make_Compilation_Unit (Sloc (N), Context_Items => Empty_List, Unit => Act_Decl, Aux_Decls_Node => Make_Compilation_Unit_Aux (Sloc (N))); Set_Parent_Spec (Act_Decl, Parent_Spec (N)); -- The new compilation unit is linked to its body, but both share the -- same file, so we do not set Body_Required on the new unit so as not -- to create a spurious dependency on a non-existent body in the ali. -- This simplifies CodePeer unit traversal. -- We use the original instantiation compilation unit as the resulting -- compilation unit of the instance, since this is the main unit. Rewrite (N, Act_Body); Body_Cunit := Parent (N); -- The two compilation unit nodes are linked by the Library_Unit field Set_Library_Unit (Decl_Cunit, Body_Cunit); Set_Library_Unit (Body_Cunit, Decl_Cunit); -- Preserve the private nature of the package if needed Set_Private_Present (Decl_Cunit, Private_Present (Body_Cunit)); -- If the instance is not the main unit, its context, categorization -- and elaboration entity are not relevant to the compilation. if Body_Cunit /= Cunit (Main_Unit) then Make_Instance_Unit (Body_Cunit, In_Main => False); return; end if; -- The context clause items on the instantiation, which are now attached -- to the body compilation unit (since the body overwrote the original -- instantiation node), semantically belong on the spec, so copy them -- there. It's harmless to leave them on the body as well. In fact one -- could argue that they belong in both places. Citem := First (Context_Items (Body_Cunit)); while Present (Citem) loop Append (New_Copy (Citem), Context_Items (Decl_Cunit)); Next (Citem); end loop; -- Propagate categorization flags on packages, so that they appear in -- the ali file for the spec of the unit. if Ekind (New_Main) = E_Package then Set_Is_Pure (Old_Main, Is_Pure (New_Main)); Set_Is_Preelaborated (Old_Main, Is_Preelaborated (New_Main)); Set_Is_Remote_Types (Old_Main, Is_Remote_Types (New_Main)); Set_Is_Shared_Passive (Old_Main, Is_Shared_Passive (New_Main)); Set_Is_Remote_Call_Interface (Old_Main, Is_Remote_Call_Interface (New_Main)); end if; -- Make entry in Units table, so that binder can generate call to -- elaboration procedure for body, if any. Make_Instance_Unit (Body_Cunit, In_Main => True); Main_Unit_Entity := New_Main; Set_Cunit_Entity (Main_Unit, Main_Unit_Entity); -- Build elaboration entity, since the instance may certainly generate -- elaboration code requiring a flag for protection. Build_Elaboration_Entity (Decl_Cunit, New_Main); end Build_Instance_Compilation_Unit_Nodes; ----------------------------- -- Check_Access_Definition -- ----------------------------- procedure Check_Access_Definition (N : Node_Id) is begin pragma Assert (Ada_Version >= Ada_2005 and then Present (Access_Definition (N))); null; end Check_Access_Definition; ----------------------------------- -- Check_Formal_Package_Instance -- ----------------------------------- -- If the formal has specific parameters, they must match those of the -- actual. Both of them are instances, and the renaming declarations for -- their formal parameters appear in the same order in both. The analyzed -- formal has been analyzed in the context of the current instance. procedure Check_Formal_Package_Instance (Formal_Pack : Entity_Id; Actual_Pack : Entity_Id) is E1 : Entity_Id := First_Entity (Actual_Pack); E2 : Entity_Id := First_Entity (Formal_Pack); Expr1 : Node_Id; Expr2 : Node_Id; procedure Check_Mismatch (B : Boolean); -- Common error routine for mismatch between the parameters of the -- actual instance and those of the formal package. function Same_Instantiated_Constant (E1, E2 : Entity_Id) return Boolean; -- The formal may come from a nested formal package, and the actual may -- have been constant-folded. To determine whether the two denote the -- same entity we may have to traverse several definitions to recover -- the ultimate entity that they refer to. function Same_Instantiated_Variable (E1, E2 : Entity_Id) return Boolean; -- Similarly, if the formal comes from a nested formal package, the -- actual may designate the formal through multiple renamings, which -- have to be followed to determine the original variable in question. -------------------- -- Check_Mismatch -- -------------------- procedure Check_Mismatch (B : Boolean) is Kind : constant Node_Kind := Nkind (Parent (E2)); begin if Kind = N_Formal_Type_Declaration then return; elsif Nkind_In (Kind, N_Formal_Object_Declaration, N_Formal_Package_Declaration) or else Kind in N_Formal_Subprogram_Declaration then null; elsif B then Error_Msg_NE ("actual for & in actual instance does not match formal", Parent (Actual_Pack), E1); end if; end Check_Mismatch; -------------------------------- -- Same_Instantiated_Constant -- -------------------------------- function Same_Instantiated_Constant (E1, E2 : Entity_Id) return Boolean is Ent : Entity_Id; begin Ent := E2; while Present (Ent) loop if E1 = Ent then return True; elsif Ekind (Ent) /= E_Constant then return False; elsif Is_Entity_Name (Constant_Value (Ent)) then if Entity (Constant_Value (Ent)) = E1 then return True; else Ent := Entity (Constant_Value (Ent)); end if; -- The actual may be a constant that has been folded. Recover -- original name. elsif Is_Entity_Name (Original_Node (Constant_Value (Ent))) then Ent := Entity (Original_Node (Constant_Value (Ent))); else return False; end if; end loop; return False; end Same_Instantiated_Constant; -------------------------------- -- Same_Instantiated_Variable -- -------------------------------- function Same_Instantiated_Variable (E1, E2 : Entity_Id) return Boolean is function Original_Entity (E : Entity_Id) return Entity_Id; -- Follow chain of renamings to the ultimate ancestor --------------------- -- Original_Entity -- --------------------- function Original_Entity (E : Entity_Id) return Entity_Id is Orig : Entity_Id; begin Orig := E; while Nkind (Parent (Orig)) = N_Object_Renaming_Declaration and then Present (Renamed_Object (Orig)) and then Is_Entity_Name (Renamed_Object (Orig)) loop Orig := Entity (Renamed_Object (Orig)); end loop; return Orig; end Original_Entity; -- Start of processing for Same_Instantiated_Variable begin return Ekind (E1) = Ekind (E2) and then Original_Entity (E1) = Original_Entity (E2); end Same_Instantiated_Variable; -- Start of processing for Check_Formal_Package_Instance begin while Present (E1) and then Present (E2) loop exit when Ekind (E1) = E_Package and then Renamed_Entity (E1) = Renamed_Entity (Actual_Pack); -- If the formal is the renaming of the formal package, this -- is the end of its formal part, which may occur before the -- end of the formal part in the actual in the presence of -- defaulted parameters in the formal package. exit when Nkind (Parent (E2)) = N_Package_Renaming_Declaration and then Renamed_Entity (E2) = Scope (E2); -- The analysis of the actual may generate additional internal -- entities. If the formal is defaulted, there is no corresponding -- analysis and the internal entities must be skipped, until we -- find corresponding entities again. if Comes_From_Source (E2) and then not Comes_From_Source (E1) and then Chars (E1) /= Chars (E2) then while Present (E1) and then Chars (E1) /= Chars (E2) loop Next_Entity (E1); end loop; end if; if No (E1) then return; -- If the formal entity comes from a formal declaration, it was -- defaulted in the formal package, and no check is needed on it. elsif Nkind (Parent (E2)) = N_Formal_Object_Declaration then goto Next_E; elsif Is_Type (E1) then -- Subtypes must statically match. E1, E2 are the local entities -- that are subtypes of the actuals. Itypes generated for other -- parameters need not be checked, the check will be performed -- on the parameters themselves. -- If E2 is a formal type declaration, it is a defaulted parameter -- and needs no checking. if not Is_Itype (E1) and then not Is_Itype (E2) then Check_Mismatch (not Is_Type (E2) or else Etype (E1) /= Etype (E2) or else not Subtypes_Statically_Match (E1, E2)); end if; elsif Ekind (E1) = E_Constant then -- IN parameters must denote the same static value, or the same -- constant, or the literal null. Expr1 := Expression (Parent (E1)); if Ekind (E2) /= E_Constant then Check_Mismatch (True); goto Next_E; else Expr2 := Expression (Parent (E2)); end if; if Is_Static_Expression (Expr1) then if not Is_Static_Expression (Expr2) then Check_Mismatch (True); elsif Is_Discrete_Type (Etype (E1)) then declare V1 : constant Uint := Expr_Value (Expr1); V2 : constant Uint := Expr_Value (Expr2); begin Check_Mismatch (V1 /= V2); end; elsif Is_Real_Type (Etype (E1)) then declare V1 : constant Ureal := Expr_Value_R (Expr1); V2 : constant Ureal := Expr_Value_R (Expr2); begin Check_Mismatch (V1 /= V2); end; elsif Is_String_Type (Etype (E1)) and then Nkind (Expr1) = N_String_Literal then if Nkind (Expr2) /= N_String_Literal then Check_Mismatch (True); else Check_Mismatch (not String_Equal (Strval (Expr1), Strval (Expr2))); end if; end if; elsif Is_Entity_Name (Expr1) then if Is_Entity_Name (Expr2) then if Entity (Expr1) = Entity (Expr2) then null; else Check_Mismatch (not Same_Instantiated_Constant (Entity (Expr1), Entity (Expr2))); end if; else Check_Mismatch (True); end if; elsif Is_Entity_Name (Original_Node (Expr1)) and then Is_Entity_Name (Expr2) and then Same_Instantiated_Constant (Entity (Original_Node (Expr1)), Entity (Expr2)) then null; elsif Nkind (Expr1) = N_Null then Check_Mismatch (Nkind (Expr1) /= N_Null); else Check_Mismatch (True); end if; elsif Ekind (E1) = E_Variable then Check_Mismatch (not Same_Instantiated_Variable (E1, E2)); elsif Ekind (E1) = E_Package then Check_Mismatch (Ekind (E1) /= Ekind (E2) or else Renamed_Object (E1) /= Renamed_Object (E2)); elsif Is_Overloadable (E1) then -- Verify that the actual subprograms match. Note that actuals -- that are attributes are rewritten as subprograms. If the -- subprogram in the formal package is defaulted, no check is -- needed. Note that this can only happen in Ada 2005 when the -- formal package can be partially parameterized. if Nkind (Unit_Declaration_Node (E1)) = N_Subprogram_Renaming_Declaration and then From_Default (Unit_Declaration_Node (E1)) then null; -- If the formal package has an "others" box association that -- covers this formal, there is no need for a check either. elsif Nkind (Unit_Declaration_Node (E2)) in N_Formal_Subprogram_Declaration and then Box_Present (Unit_Declaration_Node (E2)) then null; -- No check needed if subprogram is a defaulted null procedure elsif No (Alias (E2)) and then Ekind (E2) = E_Procedure and then Null_Present (Specification (Unit_Declaration_Node (E2))) then null; -- Otherwise the actual in the formal and the actual in the -- instantiation of the formal must match, up to renamings. else Check_Mismatch (Ekind (E2) /= Ekind (E1) or else (Alias (E1)) /= Alias (E2)); end if; else raise Program_Error; end if; <<Next_E>> Next_Entity (E1); Next_Entity (E2); end loop; end Check_Formal_Package_Instance; --------------------------- -- Check_Formal_Packages -- --------------------------- procedure Check_Formal_Packages (P_Id : Entity_Id) is E : Entity_Id; Formal_P : Entity_Id; begin -- Iterate through the declarations in the instance, looking for package -- renaming declarations that denote instances of formal packages. Stop -- when we find the renaming of the current package itself. The -- declaration for a formal package without a box is followed by an -- internal entity that repeats the instantiation. E := First_Entity (P_Id); while Present (E) loop if Ekind (E) = E_Package then if Renamed_Object (E) = P_Id then exit; elsif Nkind (Parent (E)) /= N_Package_Renaming_Declaration then null; elsif not Box_Present (Parent (Associated_Formal_Package (E))) then Formal_P := Next_Entity (E); Check_Formal_Package_Instance (Formal_P, E); -- After checking, remove the internal validating package. It -- is only needed for semantic checks, and as it may contain -- generic formal declarations it should not reach gigi. Remove (Unit_Declaration_Node (Formal_P)); end if; end if; Next_Entity (E); end loop; end Check_Formal_Packages; --------------------------------- -- Check_Forward_Instantiation -- --------------------------------- procedure Check_Forward_Instantiation (Decl : Node_Id) is S : Entity_Id; Gen_Comp : Entity_Id := Cunit_Entity (Get_Source_Unit (Decl)); begin -- The instantiation appears before the generic body if we are in the -- scope of the unit containing the generic, either in its spec or in -- the package body, and before the generic body. if Ekind (Gen_Comp) = E_Package_Body then Gen_Comp := Spec_Entity (Gen_Comp); end if; if In_Open_Scopes (Gen_Comp) and then No (Corresponding_Body (Decl)) then S := Current_Scope; while Present (S) and then not Is_Compilation_Unit (S) and then not Is_Child_Unit (S) loop if Ekind (S) = E_Package then Set_Has_Forward_Instantiation (S); end if; S := Scope (S); end loop; end if; end Check_Forward_Instantiation; --------------------------- -- Check_Generic_Actuals -- --------------------------- -- The visibility of the actuals may be different between the point of -- generic instantiation and the instantiation of the body. procedure Check_Generic_Actuals (Instance : Entity_Id; Is_Formal_Box : Boolean) is E : Entity_Id; Astype : Entity_Id; function Denotes_Previous_Actual (Typ : Entity_Id) return Boolean; -- For a formal that is an array type, the component type is often a -- previous formal in the same unit. The privacy status of the component -- type will have been examined earlier in the traversal of the -- corresponding actuals, and this status should not be modified for the -- array type itself. -- -- To detect this case we have to rescan the list of formals, which -- is usually short enough to ignore the resulting inefficiency. ----------------------------- -- Denotes_Previous_Actual -- ----------------------------- function Denotes_Previous_Actual (Typ : Entity_Id) return Boolean is Prev : Entity_Id; begin Prev := First_Entity (Instance); while Present (Prev) loop if Is_Type (Prev) and then Nkind (Parent (Prev)) = N_Subtype_Declaration and then Is_Entity_Name (Subtype_Indication (Parent (Prev))) and then Entity (Subtype_Indication (Parent (Prev))) = Typ then return True; elsif Prev = E then return False; else Next_Entity (Prev); end if; end loop; return False; end Denotes_Previous_Actual; -- Start of processing for Check_Generic_Actuals begin E := First_Entity (Instance); while Present (E) loop if Is_Type (E) and then Nkind (Parent (E)) = N_Subtype_Declaration and then Scope (Etype (E)) /= Instance and then Is_Entity_Name (Subtype_Indication (Parent (E))) then if Is_Array_Type (E) and then Denotes_Previous_Actual (Component_Type (E)) then null; else Check_Private_View (Subtype_Indication (Parent (E))); end if; Set_Is_Generic_Actual_Type (E, True); Set_Is_Hidden (E, False); Set_Is_Potentially_Use_Visible (E, In_Use (Instance)); -- We constructed the generic actual type as a subtype of the -- supplied type. This means that it normally would not inherit -- subtype specific attributes of the actual, which is wrong for -- the generic case. Astype := Ancestor_Subtype (E); if No (Astype) then -- This can happen when E is an itype that is the full view of -- a private type completed, e.g. with a constrained array. In -- that case, use the first subtype, which will carry size -- information. The base type itself is unconstrained and will -- not carry it. Astype := First_Subtype (E); end if; Set_Size_Info (E, (Astype)); Set_RM_Size (E, RM_Size (Astype)); Set_First_Rep_Item (E, First_Rep_Item (Astype)); if Is_Discrete_Or_Fixed_Point_Type (E) then Set_RM_Size (E, RM_Size (Astype)); -- In nested instances, the base type of an access actual -- may itself be private, and need to be exchanged. elsif Is_Access_Type (E) and then Is_Private_Type (Etype (E)) then Check_Private_View (New_Occurrence_Of (Etype (E), Sloc (Instance))); end if; elsif Ekind (E) = E_Package then -- If this is the renaming for the current instance, we're done. -- Otherwise it is a formal package. If the corresponding formal -- was declared with a box, the (instantiations of the) generic -- formal part are also visible. Otherwise, ignore the entity -- created to validate the actuals. if Renamed_Object (E) = Instance then exit; elsif Nkind (Parent (E)) /= N_Package_Renaming_Declaration then null; -- The visibility of a formal of an enclosing generic is already -- correct. elsif Denotes_Formal_Package (E) then null; elsif Present (Associated_Formal_Package (E)) and then not Is_Generic_Formal (E) then if Box_Present (Parent (Associated_Formal_Package (E))) then Check_Generic_Actuals (Renamed_Object (E), True); else Check_Generic_Actuals (Renamed_Object (E), False); end if; Set_Is_Hidden (E, False); end if; -- If this is a subprogram instance (in a wrapper package) the -- actual is fully visible. elsif Is_Wrapper_Package (Instance) then Set_Is_Hidden (E, False); -- If the formal package is declared with a box, or if the formal -- parameter is defaulted, it is visible in the body. elsif Is_Formal_Box or else Is_Visible_Formal (E) then Set_Is_Hidden (E, False); end if; if Ekind (E) = E_Constant then -- If the type of the actual is a private type declared in the -- enclosing scope of the generic unit, the body of the generic -- sees the full view of the type (because it has to appear in -- the corresponding package body). If the type is private now, -- exchange views to restore the proper visiblity in the instance. declare Typ : constant Entity_Id := Base_Type (Etype (E)); -- The type of the actual Gen_Id : Entity_Id; -- The generic unit Parent_Scope : Entity_Id; -- The enclosing scope of the generic unit begin if Is_Wrapper_Package (Instance) then Gen_Id := Generic_Parent (Specification (Unit_Declaration_Node (Related_Instance (Instance)))); else Gen_Id := Generic_Parent (Specification (Unit_Declaration_Node (Instance))); end if; Parent_Scope := Scope (Gen_Id); -- The exchange is only needed if the generic is defined -- within a package which is not a common ancestor of the -- scope of the instance, and is not already in scope. if Is_Private_Type (Typ) and then Scope (Typ) = Parent_Scope and then Scope (Instance) /= Parent_Scope and then Ekind (Parent_Scope) = E_Package and then not Is_Child_Unit (Gen_Id) then Switch_View (Typ); -- If the type of the entity is a subtype, it may also -- have to be made visible, together with the base type -- of its full view, after exchange. if Is_Private_Type (Etype (E)) then Switch_View (Etype (E)); Switch_View (Base_Type (Etype (E))); end if; end if; end; end if; Next_Entity (E); end loop; end Check_Generic_Actuals; ------------------------------ -- Check_Generic_Child_Unit -- ------------------------------ procedure Check_Generic_Child_Unit (Gen_Id : Node_Id; Parent_Installed : in out Boolean) is Loc : constant Source_Ptr := Sloc (Gen_Id); Gen_Par : Entity_Id := Empty; E : Entity_Id; Inst_Par : Entity_Id; S : Node_Id; function Find_Generic_Child (Scop : Entity_Id; Id : Node_Id) return Entity_Id; -- Search generic parent for possible child unit with the given name function In_Enclosing_Instance return Boolean; -- Within an instance of the parent, the child unit may be denoted -- by a simple name, or an abbreviated expanded name. Examine enclosing -- scopes to locate a possible parent instantiation. ------------------------ -- Find_Generic_Child -- ------------------------ function Find_Generic_Child (Scop : Entity_Id; Id : Node_Id) return Entity_Id is E : Entity_Id; begin -- If entity of name is already set, instance has already been -- resolved, e.g. in an enclosing instantiation. if Present (Entity (Id)) then if Scope (Entity (Id)) = Scop then return Entity (Id); else return Empty; end if; else E := First_Entity (Scop); while Present (E) loop if Chars (E) = Chars (Id) and then Is_Child_Unit (E) then if Is_Child_Unit (E) and then not Is_Visible_Child_Unit (E) then Error_Msg_NE ("generic child unit& is not visible", Gen_Id, E); end if; Set_Entity (Id, E); return E; end if; Next_Entity (E); end loop; return Empty; end if; end Find_Generic_Child; --------------------------- -- In_Enclosing_Instance -- --------------------------- function In_Enclosing_Instance return Boolean is Enclosing_Instance : Node_Id; Instance_Decl : Node_Id; begin -- We do not inline any call that contains instantiations, except -- for instantiations of Unchecked_Conversion, so if we are within -- an inlined body the current instance does not require parents. if In_Inlined_Body then pragma Assert (Chars (Gen_Id) = Name_Unchecked_Conversion); return False; end if; -- Loop to check enclosing scopes Enclosing_Instance := Current_Scope; while Present (Enclosing_Instance) loop Instance_Decl := Unit_Declaration_Node (Enclosing_Instance); if Ekind (Enclosing_Instance) = E_Package and then Is_Generic_Instance (Enclosing_Instance) and then Present (Generic_Parent (Specification (Instance_Decl))) then -- Check whether the generic we are looking for is a child of -- this instance. E := Find_Generic_Child (Generic_Parent (Specification (Instance_Decl)), Gen_Id); exit when Present (E); else E := Empty; end if; Enclosing_Instance := Scope (Enclosing_Instance); end loop; if No (E) then -- Not a child unit Analyze (Gen_Id); return False; else Rewrite (Gen_Id, Make_Expanded_Name (Loc, Chars => Chars (E), Prefix => New_Occurrence_Of (Enclosing_Instance, Loc), Selector_Name => New_Occurrence_Of (E, Loc))); Set_Entity (Gen_Id, E); Set_Etype (Gen_Id, Etype (E)); Parent_Installed := False; -- Already in scope. return True; end if; end In_Enclosing_Instance; -- Start of processing for Check_Generic_Child_Unit begin -- If the name of the generic is given by a selected component, it may -- be the name of a generic child unit, and the prefix is the name of an -- instance of the parent, in which case the child unit must be visible. -- If this instance is not in scope, it must be placed there and removed -- after instantiation, because what is being instantiated is not the -- original child, but the corresponding child present in the instance -- of the parent. -- If the child is instantiated within the parent, it can be given by -- a simple name. In this case the instance is already in scope, but -- the child generic must be recovered from the generic parent as well. if Nkind (Gen_Id) = N_Selected_Component then S := Selector_Name (Gen_Id); Analyze (Prefix (Gen_Id)); Inst_Par := Entity (Prefix (Gen_Id)); if Ekind (Inst_Par) = E_Package and then Present (Renamed_Object (Inst_Par)) then Inst_Par := Renamed_Object (Inst_Par); end if; if Ekind (Inst_Par) = E_Package then if Nkind (Parent (Inst_Par)) = N_Package_Specification then Gen_Par := Generic_Parent (Parent (Inst_Par)); elsif Nkind (Parent (Inst_Par)) = N_Defining_Program_Unit_Name and then Nkind (Parent (Parent (Inst_Par))) = N_Package_Specification then Gen_Par := Generic_Parent (Parent (Parent (Inst_Par))); end if; elsif Ekind (Inst_Par) = E_Generic_Package and then Nkind (Parent (Gen_Id)) = N_Formal_Package_Declaration then -- A formal package may be a real child package, and not the -- implicit instance within a parent. In this case the child is -- not visible and has to be retrieved explicitly as well. Gen_Par := Inst_Par; end if; if Present (Gen_Par) then -- The prefix denotes an instantiation. The entity itself may be a -- nested generic, or a child unit. E := Find_Generic_Child (Gen_Par, S); if Present (E) then Change_Selected_Component_To_Expanded_Name (Gen_Id); Set_Entity (Gen_Id, E); Set_Etype (Gen_Id, Etype (E)); Set_Entity (S, E); Set_Etype (S, Etype (E)); -- Indicate that this is a reference to the parent if In_Extended_Main_Source_Unit (Gen_Id) then Set_Is_Instantiated (Inst_Par); end if; -- A common mistake is to replicate the naming scheme of a -- hierarchy by instantiating a generic child directly, rather -- than the implicit child in a parent instance: -- generic .. package Gpar is .. -- generic .. package Gpar.Child is .. -- package Par is new Gpar (); -- with Gpar.Child; -- package Par.Child is new Gpar.Child (); -- rather than Par.Child -- In this case the instantiation is within Par, which is an -- instance, but Gpar does not denote Par because we are not IN -- the instance of Gpar, so this is illegal. The test below -- recognizes this particular case. if Is_Child_Unit (E) and then not Comes_From_Source (Entity (Prefix (Gen_Id))) and then (not In_Instance or else Nkind (Parent (Parent (Gen_Id))) = N_Compilation_Unit) then Error_Msg_N ("prefix of generic child unit must be instance of parent", Gen_Id); end if; if not In_Open_Scopes (Inst_Par) and then Nkind (Parent (Gen_Id)) not in N_Generic_Renaming_Declaration then Install_Parent (Inst_Par); Parent_Installed := True; elsif In_Open_Scopes (Inst_Par) then -- If the parent is already installed, install the actuals -- for its formal packages. This is necessary when the -- child instance is a child of the parent instance: -- in this case, the parent is placed on the scope stack -- but the formal packages are not made visible. Install_Formal_Packages (Inst_Par); end if; else -- If the generic parent does not contain an entity that -- corresponds to the selector, the instance doesn't either. -- Analyzing the node will yield the appropriate error message. -- If the entity is not a child unit, then it is an inner -- generic in the parent. Analyze (Gen_Id); end if; else Analyze (Gen_Id); if Is_Child_Unit (Entity (Gen_Id)) and then Nkind (Parent (Gen_Id)) not in N_Generic_Renaming_Declaration and then not In_Open_Scopes (Inst_Par) then Install_Parent (Inst_Par); Parent_Installed := True; -- The generic unit may be the renaming of the implicit child -- present in an instance. In that case the parent instance is -- obtained from the name of the renamed entity. elsif Ekind (Entity (Gen_Id)) = E_Generic_Package and then Present (Renamed_Entity (Entity (Gen_Id))) and then Is_Child_Unit (Renamed_Entity (Entity (Gen_Id))) then declare Renamed_Package : constant Node_Id := Name (Parent (Entity (Gen_Id))); begin if Nkind (Renamed_Package) = N_Expanded_Name then Inst_Par := Entity (Prefix (Renamed_Package)); Install_Parent (Inst_Par); Parent_Installed := True; end if; end; end if; end if; elsif Nkind (Gen_Id) = N_Expanded_Name then -- Entity already present, analyze prefix, whose meaning may be -- an instance in the current context. If it is an instance of -- a relative within another, the proper parent may still have -- to be installed, if they are not of the same generation. Analyze (Prefix (Gen_Id)); -- In the unlikely case that a local declaration hides the name -- of the parent package, locate it on the homonym chain. If the -- context is an instance of the parent, the renaming entity is -- flagged as such. Inst_Par := Entity (Prefix (Gen_Id)); while Present (Inst_Par) and then not Is_Package_Or_Generic_Package (Inst_Par) loop Inst_Par := Homonym (Inst_Par); end loop; pragma Assert (Present (Inst_Par)); Set_Entity (Prefix (Gen_Id), Inst_Par); if In_Enclosing_Instance then null; elsif Present (Entity (Gen_Id)) and then Is_Child_Unit (Entity (Gen_Id)) and then not In_Open_Scopes (Inst_Par) then Install_Parent (Inst_Par); Parent_Installed := True; end if; elsif In_Enclosing_Instance then -- The child unit is found in some enclosing scope null; else Analyze (Gen_Id); -- If this is the renaming of the implicit child in a parent -- instance, recover the parent name and install it. if Is_Entity_Name (Gen_Id) then E := Entity (Gen_Id); if Is_Generic_Unit (E) and then Nkind (Parent (E)) in N_Generic_Renaming_Declaration and then Is_Child_Unit (Renamed_Object (E)) and then Is_Generic_Unit (Scope (Renamed_Object (E))) and then Nkind (Name (Parent (E))) = N_Expanded_Name then Rewrite (Gen_Id, New_Copy_Tree (Name (Parent (E)))); Inst_Par := Entity (Prefix (Gen_Id)); if not In_Open_Scopes (Inst_Par) then Install_Parent (Inst_Par); Parent_Installed := True; end if; -- If it is a child unit of a non-generic parent, it may be -- use-visible and given by a direct name. Install parent as -- for other cases. elsif Is_Generic_Unit (E) and then Is_Child_Unit (E) and then Nkind (Parent (Gen_Id)) not in N_Generic_Renaming_Declaration and then not Is_Generic_Unit (Scope (E)) then if not In_Open_Scopes (Scope (E)) then Install_Parent (Scope (E)); Parent_Installed := True; end if; end if; end if; end if; end Check_Generic_Child_Unit; ----------------------------- -- Check_Hidden_Child_Unit -- ----------------------------- procedure Check_Hidden_Child_Unit (N : Node_Id; Gen_Unit : Entity_Id; Act_Decl_Id : Entity_Id) is Gen_Id : constant Node_Id := Name (N); begin if Is_Child_Unit (Gen_Unit) and then Is_Child_Unit (Act_Decl_Id) and then Nkind (Gen_Id) = N_Expanded_Name and then Entity (Prefix (Gen_Id)) = Scope (Act_Decl_Id) and then Chars (Gen_Unit) = Chars (Act_Decl_Id) then Error_Msg_Node_2 := Scope (Act_Decl_Id); Error_Msg_NE ("generic unit & is implicitly declared in &", Defining_Unit_Name (N), Gen_Unit); Error_Msg_N ("\instance must have different name", Defining_Unit_Name (N)); end if; end Check_Hidden_Child_Unit; ------------------------ -- Check_Private_View -- ------------------------ procedure Check_Private_View (N : Node_Id) is T : constant Entity_Id := Etype (N); BT : Entity_Id; begin -- Exchange views if the type was not private in the generic but is -- private at the point of instantiation. Do not exchange views if -- the scope of the type is in scope. This can happen if both generic -- and instance are sibling units, or if type is defined in a parent. -- In this case the visibility of the type will be correct for all -- semantic checks. if Present (T) then BT := Base_Type (T); if Is_Private_Type (T) and then not Has_Private_View (N) and then Present (Full_View (T)) and then not In_Open_Scopes (Scope (T)) then -- In the generic, the full type was visible. Save the private -- entity, for subsequent exchange. Switch_View (T); elsif Has_Private_View (N) and then not Is_Private_Type (T) and then not Has_Been_Exchanged (T) and then Etype (Get_Associated_Node (N)) /= T then -- Only the private declaration was visible in the generic. If -- the type appears in a subtype declaration, the subtype in the -- instance must have a view compatible with that of its parent, -- which must be exchanged (see corresponding code in Restore_ -- Private_Views). Otherwise, if the type is defined in a parent -- unit, leave full visibility within instance, which is safe. if In_Open_Scopes (Scope (Base_Type (T))) and then not Is_Private_Type (Base_Type (T)) and then Comes_From_Source (Base_Type (T)) then null; elsif Nkind (Parent (N)) = N_Subtype_Declaration or else not In_Private_Part (Scope (Base_Type (T))) then Prepend_Elmt (T, Exchanged_Views); Exchange_Declarations (Etype (Get_Associated_Node (N))); end if; -- For composite types with inconsistent representation exchange -- component types accordingly. elsif Is_Access_Type (T) and then Is_Private_Type (Designated_Type (T)) and then not Has_Private_View (N) and then Present (Full_View (Designated_Type (T))) then Switch_View (Designated_Type (T)); elsif Is_Array_Type (T) then if Is_Private_Type (Component_Type (T)) and then not Has_Private_View (N) and then Present (Full_View (Component_Type (T))) then Switch_View (Component_Type (T)); end if; -- The normal exchange mechanism relies on the setting of a -- flag on the reference in the generic. However, an additional -- mechanism is needed for types that are not explicitly mentioned -- in the generic, but may be needed in expanded code in the -- instance. This includes component types of arrays and -- designated types of access types. This processing must also -- include the index types of arrays which we take care of here. declare Indx : Node_Id; Typ : Entity_Id; begin Indx := First_Index (T); Typ := Base_Type (Etype (Indx)); while Present (Indx) loop if Is_Private_Type (Typ) and then Present (Full_View (Typ)) then Switch_View (Typ); end if; Next_Index (Indx); end loop; end; elsif Is_Private_Type (T) and then Present (Full_View (T)) and then Is_Array_Type (Full_View (T)) and then Is_Private_Type (Component_Type (Full_View (T))) then Switch_View (T); -- Finally, a non-private subtype may have a private base type, which -- must be exchanged for consistency. This can happen when a package -- body is instantiated, when the scope stack is empty but in fact -- the subtype and the base type are declared in an enclosing scope. -- Note that in this case we introduce an inconsistency in the view -- set, because we switch the base type BT, but there could be some -- private dependent subtypes of BT which remain unswitched. Such -- subtypes might need to be switched at a later point (see specific -- provision for that case in Switch_View). elsif not Is_Private_Type (T) and then not Has_Private_View (N) and then Is_Private_Type (BT) and then Present (Full_View (BT)) and then not Is_Generic_Type (BT) and then not In_Open_Scopes (BT) then Prepend_Elmt (Full_View (BT), Exchanged_Views); Exchange_Declarations (BT); end if; end if; end Check_Private_View; ----------------------------- -- Check_Hidden_Primitives -- ----------------------------- function Check_Hidden_Primitives (Assoc_List : List_Id) return Elist_Id is Actual : Node_Id; Gen_T : Entity_Id; Result : Elist_Id := No_Elist; begin if No (Assoc_List) then return No_Elist; end if; -- Traverse the list of associations between formals and actuals -- searching for renamings of tagged types Actual := First (Assoc_List); while Present (Actual) loop if Nkind (Actual) = N_Subtype_Declaration then Gen_T := Generic_Parent_Type (Actual); if Present (Gen_T) and then Is_Tagged_Type (Gen_T) then -- Traverse the list of primitives of the actual types -- searching for hidden primitives that are visible in the -- corresponding generic formal; leave them visible and -- append them to Result to restore their decoration later. Install_Hidden_Primitives (Prims_List => Result, Gen_T => Gen_T, Act_T => Entity (Subtype_Indication (Actual))); end if; end if; Next (Actual); end loop; return Result; end Check_Hidden_Primitives; -------------------------- -- Contains_Instance_Of -- -------------------------- function Contains_Instance_Of (Inner : Entity_Id; Outer : Entity_Id; N : Node_Id) return Boolean is Elmt : Elmt_Id; Scop : Entity_Id; begin Scop := Outer; -- Verify that there are no circular instantiations. We check whether -- the unit contains an instance of the current scope or some enclosing -- scope (in case one of the instances appears in a subunit). Longer -- circularities involving subunits might seem too pathological to -- consider, but they were not too pathological for the authors of -- DEC bc30vsq, so we loop over all enclosing scopes, and mark all -- enclosing generic scopes as containing an instance. loop -- Within a generic subprogram body, the scope is not generic, to -- allow for recursive subprograms. Use the declaration to determine -- whether this is a generic unit. if Ekind (Scop) = E_Generic_Package or else (Is_Subprogram (Scop) and then Nkind (Unit_Declaration_Node (Scop)) = N_Generic_Subprogram_Declaration) then Elmt := First_Elmt (Inner_Instances (Inner)); while Present (Elmt) loop if Node (Elmt) = Scop then Error_Msg_Node_2 := Inner; Error_Msg_NE ("circular Instantiation: & instantiated within &!", N, Scop); return True; elsif Node (Elmt) = Inner then return True; elsif Contains_Instance_Of (Node (Elmt), Scop, N) then Error_Msg_Node_2 := Inner; Error_Msg_NE ("circular Instantiation: & instantiated within &!", N, Node (Elmt)); return True; end if; Next_Elmt (Elmt); end loop; -- Indicate that Inner is being instantiated within Scop Append_Elmt (Inner, Inner_Instances (Scop)); end if; if Scop = Standard_Standard then exit; else Scop := Scope (Scop); end if; end loop; return False; end Contains_Instance_Of; ----------------------- -- Copy_Generic_Node -- ----------------------- function Copy_Generic_Node (N : Node_Id; Parent_Id : Node_Id; Instantiating : Boolean) return Node_Id is Ent : Entity_Id; New_N : Node_Id; function Copy_Generic_Descendant (D : Union_Id) return Union_Id; -- Check the given value of one of the Fields referenced by the -- current node to determine whether to copy it recursively. The -- field may hold a Node_Id, a List_Id, or an Elist_Id, or a plain -- value (Sloc, Uint, Char) in which case it need not be copied. procedure Copy_Descendants; -- Common utility for various nodes function Copy_Generic_Elist (E : Elist_Id) return Elist_Id; -- Make copy of element list function Copy_Generic_List (L : List_Id; Parent_Id : Node_Id) return List_Id; -- Apply Copy_Node recursively to the members of a node list function In_Defining_Unit_Name (Nam : Node_Id) return Boolean; -- True if an identifier is part of the defining program unit name -- of a child unit. The entity of such an identifier must be kept -- (for ASIS use) even though as the name of an enclosing generic -- it would otherwise not be preserved in the generic tree. ---------------------- -- Copy_Descendants -- ---------------------- procedure Copy_Descendants is use Atree.Unchecked_Access; -- This code section is part of the implementation of an untyped -- tree traversal, so it needs direct access to node fields. begin Set_Field1 (New_N, Copy_Generic_Descendant (Field1 (N))); Set_Field2 (New_N, Copy_Generic_Descendant (Field2 (N))); Set_Field3 (New_N, Copy_Generic_Descendant (Field3 (N))); Set_Field4 (New_N, Copy_Generic_Descendant (Field4 (N))); Set_Field5 (New_N, Copy_Generic_Descendant (Field5 (N))); end Copy_Descendants; ----------------------------- -- Copy_Generic_Descendant -- ----------------------------- function Copy_Generic_Descendant (D : Union_Id) return Union_Id is begin if D = Union_Id (Empty) then return D; elsif D in Node_Range then return Union_Id (Copy_Generic_Node (Node_Id (D), New_N, Instantiating)); elsif D in List_Range then return Union_Id (Copy_Generic_List (List_Id (D), New_N)); elsif D in Elist_Range then return Union_Id (Copy_Generic_Elist (Elist_Id (D))); -- Nothing else is copyable (e.g. Uint values), return as is else return D; end if; end Copy_Generic_Descendant; ------------------------ -- Copy_Generic_Elist -- ------------------------ function Copy_Generic_Elist (E : Elist_Id) return Elist_Id is M : Elmt_Id; L : Elist_Id; begin if Present (E) then L := New_Elmt_List; M := First_Elmt (E); while Present (M) loop Append_Elmt (Copy_Generic_Node (Node (M), Empty, Instantiating), L); Next_Elmt (M); end loop; return L; else return No_Elist; end if; end Copy_Generic_Elist; ----------------------- -- Copy_Generic_List -- ----------------------- function Copy_Generic_List (L : List_Id; Parent_Id : Node_Id) return List_Id is N : Node_Id; New_L : List_Id; begin if Present (L) then New_L := New_List; Set_Parent (New_L, Parent_Id); N := First (L); while Present (N) loop Append (Copy_Generic_Node (N, Empty, Instantiating), New_L); Next (N); end loop; return New_L; else return No_List; end if; end Copy_Generic_List; --------------------------- -- In_Defining_Unit_Name -- --------------------------- function In_Defining_Unit_Name (Nam : Node_Id) return Boolean is begin return Present (Parent (Nam)) and then (Nkind (Parent (Nam)) = N_Defining_Program_Unit_Name or else (Nkind (Parent (Nam)) = N_Expanded_Name and then In_Defining_Unit_Name (Parent (Nam)))); end In_Defining_Unit_Name; -- Start of processing for Copy_Generic_Node begin if N = Empty then return N; end if; New_N := New_Copy (N); -- Copy aspects if present if Has_Aspects (N) then Set_Has_Aspects (New_N, False); Set_Aspect_Specifications (New_N, Copy_Generic_List (Aspect_Specifications (N), Parent_Id)); end if; if Instantiating then Adjust_Instantiation_Sloc (New_N, S_Adjustment); end if; if not Is_List_Member (N) then Set_Parent (New_N, Parent_Id); end if; -- If defining identifier, then all fields have been copied already if Nkind (New_N) in N_Entity then null; -- Special casing for identifiers and other entity names and operators elsif Nkind_In (New_N, N_Identifier, N_Character_Literal, N_Expanded_Name, N_Operator_Symbol) or else Nkind (New_N) in N_Op then if not Instantiating then -- Link both nodes in order to assign subsequently the entity of -- the copy to the original node, in case this is a global -- reference. Set_Associated_Node (N, New_N); -- If we are within an instantiation, this is a nested generic -- that has already been analyzed at the point of definition. We -- must preserve references that were global to the enclosing -- parent at that point. Other occurrences, whether global or -- local to the current generic, must be resolved anew, so we -- reset the entity in the generic copy. A global reference has a -- smaller depth than the parent, or else the same depth in case -- both are distinct compilation units. -- A child unit is implicitly declared within the enclosing parent -- but is in fact global to it, and must be preserved. -- It is also possible for Current_Instantiated_Parent to be -- defined, and for this not to be a nested generic, namely if the -- unit is loaded through Rtsfind. In that case, the entity of -- New_N is only a link to the associated node, and not a defining -- occurrence. -- The entities for parent units in the defining_program_unit of a -- generic child unit are established when the context of the unit -- is first analyzed, before the generic copy is made. They are -- preserved in the copy for use in ASIS queries. Ent := Entity (New_N); if No (Current_Instantiated_Parent.Gen_Id) then if No (Ent) or else Nkind (Ent) /= N_Defining_Identifier or else not In_Defining_Unit_Name (N) then Set_Associated_Node (New_N, Empty); end if; elsif No (Ent) or else not Nkind_In (Ent, N_Defining_Identifier, N_Defining_Character_Literal, N_Defining_Operator_Symbol) or else No (Scope (Ent)) or else (Scope (Ent) = Current_Instantiated_Parent.Gen_Id and then not Is_Child_Unit (Ent)) or else (Scope_Depth (Scope (Ent)) > Scope_Depth (Current_Instantiated_Parent.Gen_Id) and then Get_Source_Unit (Ent) = Get_Source_Unit (Current_Instantiated_Parent.Gen_Id)) then Set_Associated_Node (New_N, Empty); end if; -- Case of instantiating identifier or some other name or operator else -- If the associated node is still defined, the entity in it is -- global, and must be copied to the instance. If this copy is -- being made for a body to inline, it is applied to an -- instantiated tree, and the entity is already present and must -- be also preserved. declare Assoc : constant Node_Id := Get_Associated_Node (N); begin if Present (Assoc) then if Nkind (Assoc) = Nkind (N) then Set_Entity (New_N, Entity (Assoc)); Check_Private_View (N); elsif Nkind (Assoc) = N_Function_Call then Set_Entity (New_N, Entity (Name (Assoc))); elsif Nkind_In (Assoc, N_Defining_Identifier, N_Defining_Character_Literal, N_Defining_Operator_Symbol) and then Expander_Active then -- Inlining case: we are copying a tree that contains -- global entities, which are preserved in the copy to be -- used for subsequent inlining. null; else Set_Entity (New_N, Empty); end if; end if; end; end if; -- For expanded name, we must copy the Prefix and Selector_Name if Nkind (N) = N_Expanded_Name then Set_Prefix (New_N, Copy_Generic_Node (Prefix (N), New_N, Instantiating)); Set_Selector_Name (New_N, Copy_Generic_Node (Selector_Name (N), New_N, Instantiating)); -- For operators, we must copy the right operand elsif Nkind (N) in N_Op then Set_Right_Opnd (New_N, Copy_Generic_Node (Right_Opnd (N), New_N, Instantiating)); -- And for binary operators, the left operand as well if Nkind (N) in N_Binary_Op then Set_Left_Opnd (New_N, Copy_Generic_Node (Left_Opnd (N), New_N, Instantiating)); end if; end if; -- Special casing for stubs elsif Nkind (N) in N_Body_Stub then -- In any case, we must copy the specification or defining -- identifier as appropriate. if Nkind (N) = N_Subprogram_Body_Stub then Set_Specification (New_N, Copy_Generic_Node (Specification (N), New_N, Instantiating)); else Set_Defining_Identifier (New_N, Copy_Generic_Node (Defining_Identifier (N), New_N, Instantiating)); end if; -- If we are not instantiating, then this is where we load and -- analyze subunits, i.e. at the point where the stub occurs. A -- more permissive system might defer this analysis to the point -- of instantiation, but this seems to complicated for now. if not Instantiating then declare Subunit_Name : constant Unit_Name_Type := Get_Unit_Name (N); Subunit : Node_Id; Unum : Unit_Number_Type; New_Body : Node_Id; begin -- Make sure that, if it is a subunit of the main unit that is -- preprocessed and if -gnateG is specified, the preprocessed -- file will be written. Lib.Analysing_Subunit_Of_Main := Lib.In_Extended_Main_Source_Unit (N); Unum := Load_Unit (Load_Name => Subunit_Name, Required => False, Subunit => True, Error_Node => N); Lib.Analysing_Subunit_Of_Main := False; -- If the proper body is not found, a warning message will be -- emitted when analyzing the stub, or later at the point -- of instantiation. Here we just leave the stub as is. if Unum = No_Unit then Subunits_Missing := True; goto Subunit_Not_Found; end if; Subunit := Cunit (Unum); if Nkind (Unit (Subunit)) /= N_Subunit then Error_Msg_N ("found child unit instead of expected SEPARATE subunit", Subunit); Error_Msg_Sloc := Sloc (N); Error_Msg_N ("\to complete stub #", Subunit); goto Subunit_Not_Found; end if; -- We must create a generic copy of the subunit, in order to -- perform semantic analysis on it, and we must replace the -- stub in the original generic unit with the subunit, in order -- to preserve non-local references within. -- Only the proper body needs to be copied. Library_Unit and -- context clause are simply inherited by the generic copy. -- Note that the copy (which may be recursive if there are -- nested subunits) must be done first, before attaching it to -- the enclosing generic. New_Body := Copy_Generic_Node (Proper_Body (Unit (Subunit)), Empty, Instantiating => False); -- Now place the original proper body in the original generic -- unit. This is a body, not a compilation unit. Rewrite (N, Proper_Body (Unit (Subunit))); Set_Is_Compilation_Unit (Defining_Entity (N), False); Set_Was_Originally_Stub (N); -- Finally replace the body of the subunit with its copy, and -- make this new subunit into the library unit of the generic -- copy, which does not have stubs any longer. Set_Proper_Body (Unit (Subunit), New_Body); Set_Library_Unit (New_N, Subunit); Inherit_Context (Unit (Subunit), N); end; -- If we are instantiating, this must be an error case, since -- otherwise we would have replaced the stub node by the proper body -- that corresponds. So just ignore it in the copy (i.e. we have -- copied it, and that is good enough). else null; end if; <<Subunit_Not_Found>> null; -- If the node is a compilation unit, it is the subunit of a stub, which -- has been loaded already (see code below). In this case, the library -- unit field of N points to the parent unit (which is a compilation -- unit) and need not (and cannot!) be copied. -- When the proper body of the stub is analyzed, the library_unit link -- is used to establish the proper context (see sem_ch10). -- The other fields of a compilation unit are copied as usual elsif Nkind (N) = N_Compilation_Unit then -- This code can only be executed when not instantiating, because in -- the copy made for an instantiation, the compilation unit node has -- disappeared at the point that a stub is replaced by its proper -- body. pragma Assert (not Instantiating); Set_Context_Items (New_N, Copy_Generic_List (Context_Items (N), New_N)); Set_Unit (New_N, Copy_Generic_Node (Unit (N), New_N, False)); Set_First_Inlined_Subprogram (New_N, Copy_Generic_Node (First_Inlined_Subprogram (N), New_N, False)); Set_Aux_Decls_Node (New_N, Copy_Generic_Node (Aux_Decls_Node (N), New_N, False)); -- For an assignment node, the assignment is known to be semantically -- legal if we are instantiating the template. This avoids incorrect -- diagnostics in generated code. elsif Nkind (N) = N_Assignment_Statement then -- Copy name and expression fields in usual manner Set_Name (New_N, Copy_Generic_Node (Name (N), New_N, Instantiating)); Set_Expression (New_N, Copy_Generic_Node (Expression (N), New_N, Instantiating)); if Instantiating then Set_Assignment_OK (Name (New_N), True); end if; elsif Nkind_In (N, N_Aggregate, N_Extension_Aggregate) then if not Instantiating then Set_Associated_Node (N, New_N); else if Present (Get_Associated_Node (N)) and then Nkind (Get_Associated_Node (N)) = Nkind (N) then -- In the generic the aggregate has some composite type. If at -- the point of instantiation the type has a private view, -- install the full view (and that of its ancestors, if any). declare T : Entity_Id := (Etype (Get_Associated_Node (New_N))); Rt : Entity_Id; begin if Present (T) and then Is_Private_Type (T) then Switch_View (T); end if; if Present (T) and then Is_Tagged_Type (T) and then Is_Derived_Type (T) then Rt := Root_Type (T); loop T := Etype (T); if Is_Private_Type (T) then Switch_View (T); end if; exit when T = Rt; end loop; end if; end; end if; end if; -- Do not copy the associated node, which points to the generic copy -- of the aggregate. declare use Atree.Unchecked_Access; -- This code section is part of the implementation of an untyped -- tree traversal, so it needs direct access to node fields. begin Set_Field1 (New_N, Copy_Generic_Descendant (Field1 (N))); Set_Field2 (New_N, Copy_Generic_Descendant (Field2 (N))); Set_Field3 (New_N, Copy_Generic_Descendant (Field3 (N))); Set_Field5 (New_N, Copy_Generic_Descendant (Field5 (N))); end; -- Allocators do not have an identifier denoting the access type, so we -- must locate it through the expression to check whether the views are -- consistent. elsif Nkind (N) = N_Allocator and then Nkind (Expression (N)) = N_Qualified_Expression and then Is_Entity_Name (Subtype_Mark (Expression (N))) and then Instantiating then declare T : constant Node_Id := Get_Associated_Node (Subtype_Mark (Expression (N))); Acc_T : Entity_Id; begin if Present (T) then -- Retrieve the allocator node in the generic copy Acc_T := Etype (Parent (Parent (T))); if Present (Acc_T) and then Is_Private_Type (Acc_T) then Switch_View (Acc_T); end if; end if; Copy_Descendants; end; -- For a proper body, we must catch the case of a proper body that -- replaces a stub. This represents the point at which a separate -- compilation unit, and hence template file, may be referenced, so we -- must make a new source instantiation entry for the template of the -- subunit, and ensure that all nodes in the subunit are adjusted using -- this new source instantiation entry. elsif Nkind (N) in N_Proper_Body then declare Save_Adjustment : constant Sloc_Adjustment := S_Adjustment; begin if Instantiating and then Was_Originally_Stub (N) then Create_Instantiation_Source (Instantiation_Node, Defining_Entity (N), False, S_Adjustment); end if; -- Now copy the fields of the proper body, using the new -- adjustment factor if one was needed as per test above. Copy_Descendants; -- Restore the original adjustment factor in case changed S_Adjustment := Save_Adjustment; end; -- Don't copy Ident or Comment pragmas, since the comment belongs to the -- generic unit, not to the instantiating unit. elsif Nkind (N) = N_Pragma and then Instantiating then declare Prag_Id : constant Pragma_Id := Get_Pragma_Id (N); begin if Prag_Id = Pragma_Ident or else Prag_Id = Pragma_Comment then New_N := Make_Null_Statement (Sloc (N)); else Copy_Descendants; end if; end; elsif Nkind_In (N, N_Integer_Literal, N_Real_Literal) then -- No descendant fields need traversing null; elsif Nkind (N) = N_String_Literal and then Present (Etype (N)) and then Instantiating then -- If the string is declared in an outer scope, the string_literal -- subtype created for it may have the wrong scope. We force the -- reanalysis of the constant to generate a new itype in the proper -- context. Set_Etype (New_N, Empty); Set_Analyzed (New_N, False); -- For the remaining nodes, copy their descendants recursively else Copy_Descendants; if Instantiating and then Nkind (N) = N_Subprogram_Body then Set_Generic_Parent (Specification (New_N), N); -- Should preserve Corresponding_Spec??? (12.3(14)) end if; end if; return New_N; end Copy_Generic_Node; ---------------------------- -- Denotes_Formal_Package -- ---------------------------- function Denotes_Formal_Package (Pack : Entity_Id; On_Exit : Boolean := False; Instance : Entity_Id := Empty) return Boolean is Par : Entity_Id; Scop : constant Entity_Id := Scope (Pack); E : Entity_Id; function Is_Actual_Of_Previous_Formal (P : Entity_Id) return Boolean; -- The package in question may be an actual for a previous formal -- package P of the current instance, so examine its actuals as well. -- This must be recursive over other formal packages. ---------------------------------- -- Is_Actual_Of_Previous_Formal -- ---------------------------------- function Is_Actual_Of_Previous_Formal (P : Entity_Id) return Boolean is E1 : Entity_Id; begin E1 := First_Entity (P); while Present (E1) and then E1 /= Instance loop if Ekind (E1) = E_Package and then Nkind (Parent (E1)) = N_Package_Renaming_Declaration then if Renamed_Object (E1) = Pack then return True; elsif E1 = P or else Renamed_Object (E1) = P then return False; elsif Is_Actual_Of_Previous_Formal (E1) then return True; end if; end if; Next_Entity (E1); end loop; return False; end Is_Actual_Of_Previous_Formal; -- Start of processing for Denotes_Formal_Package begin if On_Exit then Par := Instance_Envs.Table (Instance_Envs.Last).Instantiated_Parent.Act_Id; else Par := Current_Instantiated_Parent.Act_Id; end if; if Ekind (Scop) = E_Generic_Package or else Nkind (Unit_Declaration_Node (Scop)) = N_Generic_Subprogram_Declaration then return True; elsif Nkind (Original_Node (Unit_Declaration_Node (Pack))) = N_Formal_Package_Declaration then return True; elsif No (Par) then return False; else -- Check whether this package is associated with a formal package of -- the enclosing instantiation. Iterate over the list of renamings. E := First_Entity (Par); while Present (E) loop if Ekind (E) /= E_Package or else Nkind (Parent (E)) /= N_Package_Renaming_Declaration then null; elsif Renamed_Object (E) = Par then return False; elsif Renamed_Object (E) = Pack then return True; elsif Is_Actual_Of_Previous_Formal (E) then return True; end if; Next_Entity (E); end loop; return False; end if; end Denotes_Formal_Package; ----------------- -- End_Generic -- ----------------- procedure End_Generic is begin -- ??? More things could be factored out in this routine. Should -- probably be done at a later stage. Inside_A_Generic := Generic_Flags.Table (Generic_Flags.Last); Generic_Flags.Decrement_Last; Expander_Mode_Restore; end End_Generic; ------------- -- Earlier -- ------------- function Earlier (N1, N2 : Node_Id) return Boolean is procedure Find_Depth (P : in out Node_Id; D : in out Integer); -- Find distance from given node to enclosing compilation unit ---------------- -- Find_Depth -- ---------------- procedure Find_Depth (P : in out Node_Id; D : in out Integer) is begin while Present (P) and then Nkind (P) /= N_Compilation_Unit loop P := True_Parent (P); D := D + 1; end loop; end Find_Depth; -- Local declarations D1 : Integer := 0; D2 : Integer := 0; P1 : Node_Id := N1; P2 : Node_Id := N2; -- Start of processing for Earlier begin Find_Depth (P1, D1); Find_Depth (P2, D2); if P1 /= P2 then return False; else P1 := N1; P2 := N2; end if; while D1 > D2 loop P1 := True_Parent (P1); D1 := D1 - 1; end loop; while D2 > D1 loop P2 := True_Parent (P2); D2 := D2 - 1; end loop; -- At this point P1 and P2 are at the same distance from the root. -- We examine their parents until we find a common declarative list. -- If we reach the root, N1 and N2 do not descend from the same -- declarative list (e.g. one is nested in the declarative part and -- the other is in a block in the statement part) and the earlier -- one is already frozen. while not Is_List_Member (P1) or else not Is_List_Member (P2) or else List_Containing (P1) /= List_Containing (P2) loop P1 := True_Parent (P1); P2 := True_Parent (P2); if Nkind (Parent (P1)) = N_Subunit then P1 := Corresponding_Stub (Parent (P1)); end if; if Nkind (Parent (P2)) = N_Subunit then P2 := Corresponding_Stub (Parent (P2)); end if; if P1 = P2 then return False; end if; end loop; -- Expanded code usually shares the source location of the original -- construct it was generated for. This however may not necessarely -- reflect the true location of the code within the tree. -- Before comparing the slocs of the two nodes, make sure that we are -- working with correct source locations. Assume that P1 is to the left -- of P2. If either one does not come from source, traverse the common -- list heading towards the other node and locate the first source -- statement. -- P1 P2 -- ----+===+===+--------------+===+===+---- -- expanded code expanded code if not Comes_From_Source (P1) then while Present (P1) loop -- Neither P2 nor a source statement were located during the -- search. If we reach the end of the list, then P1 does not -- occur earlier than P2. -- ----> -- start --- P2 ----- P1 --- end if No (Next (P1)) then return False; -- We encounter P2 while going to the right of the list. This -- means that P1 does indeed appear earlier. -- ----> -- start --- P1 ===== P2 --- end -- expanded code in between elsif P1 = P2 then return True; -- No need to look any further since we have located a source -- statement. elsif Comes_From_Source (P1) then exit; end if; -- Keep going right Next (P1); end loop; end if; if not Comes_From_Source (P2) then while Present (P2) loop -- Neither P1 nor a source statement were located during the -- search. If we reach the start of the list, then P1 does not -- occur earlier than P2. -- <---- -- start --- P2 --- P1 --- end if No (Prev (P2)) then return False; -- We encounter P1 while going to the left of the list. This -- means that P1 does indeed appear earlier. -- <---- -- start --- P1 ===== P2 --- end -- expanded code in between elsif P2 = P1 then return True; -- No need to look any further since we have located a source -- statement. elsif Comes_From_Source (P2) then exit; end if; -- Keep going left Prev (P2); end loop; end if; -- At this point either both nodes came from source or we approximated -- their source locations through neighbouring source statements. There -- is no need to look at the top level locations of P1 and P2 because -- both nodes are in the same list and whether the enclosing context is -- instantiated is irrelevant. return Sloc (P1) < Sloc (P2); end Earlier; ---------------------- -- Find_Actual_Type -- ---------------------- function Find_Actual_Type (Typ : Entity_Id; Gen_Type : Entity_Id) return Entity_Id is Gen_Scope : constant Entity_Id := Scope (Gen_Type); T : Entity_Id; begin -- Special processing only applies to child units if not Is_Child_Unit (Gen_Scope) then return Get_Instance_Of (Typ); -- If designated or component type is itself a formal of the child unit, -- its instance is available. elsif Scope (Typ) = Gen_Scope then return Get_Instance_Of (Typ); -- If the array or access type is not declared in the parent unit, -- no special processing needed. elsif not Is_Generic_Type (Typ) and then Scope (Gen_Scope) /= Scope (Typ) then return Get_Instance_Of (Typ); -- Otherwise, retrieve designated or component type by visibility else T := Current_Entity (Typ); while Present (T) loop if In_Open_Scopes (Scope (T)) then return T; elsif Is_Generic_Actual_Type (T) then return T; end if; T := Homonym (T); end loop; return Typ; end if; end Find_Actual_Type; ---------------------------- -- Freeze_Subprogram_Body -- ---------------------------- procedure Freeze_Subprogram_Body (Inst_Node : Node_Id; Gen_Body : Node_Id; Pack_Id : Entity_Id) is Gen_Unit : constant Entity_Id := Get_Generic_Entity (Inst_Node); Par : constant Entity_Id := Scope (Gen_Unit); E_G_Id : Entity_Id; Enc_G : Entity_Id; Enc_I : Node_Id; F_Node : Node_Id; function Enclosing_Package_Body (N : Node_Id) return Node_Id; -- Find innermost package body that encloses the given node, and which -- is not a compilation unit. Freeze nodes for the instance, or for its -- enclosing body, may be inserted after the enclosing_body of the -- generic unit. Used to determine proper placement of freeze node for -- both package and subprogram instances. function Package_Freeze_Node (B : Node_Id) return Node_Id; -- Find entity for given package body, and locate or create a freeze -- node for it. ---------------------------- -- Enclosing_Package_Body -- ---------------------------- function Enclosing_Package_Body (N : Node_Id) return Node_Id is P : Node_Id; begin P := Parent (N); while Present (P) and then Nkind (Parent (P)) /= N_Compilation_Unit loop if Nkind (P) = N_Package_Body then if Nkind (Parent (P)) = N_Subunit then return Corresponding_Stub (Parent (P)); else return P; end if; end if; P := True_Parent (P); end loop; return Empty; end Enclosing_Package_Body; ------------------------- -- Package_Freeze_Node -- ------------------------- function Package_Freeze_Node (B : Node_Id) return Node_Id is Id : Entity_Id; begin if Nkind (B) = N_Package_Body then Id := Corresponding_Spec (B); else pragma Assert (Nkind (B) = N_Package_Body_Stub); Id := Corresponding_Spec (Proper_Body (Unit (Library_Unit (B)))); end if; Ensure_Freeze_Node (Id); return Freeze_Node (Id); end Package_Freeze_Node; -- Start of processing of Freeze_Subprogram_Body begin -- If the instance and the generic body appear within the same unit, and -- the instance precedes the generic, the freeze node for the instance -- must appear after that of the generic. If the generic is nested -- within another instance I2, then current instance must be frozen -- after I2. In both cases, the freeze nodes are those of enclosing -- packages. Otherwise, the freeze node is placed at the end of the -- current declarative part. Enc_G := Enclosing_Package_Body (Gen_Body); Enc_I := Enclosing_Package_Body (Inst_Node); Ensure_Freeze_Node (Pack_Id); F_Node := Freeze_Node (Pack_Id); if Is_Generic_Instance (Par) and then Present (Freeze_Node (Par)) and then In_Same_Declarative_Part (Freeze_Node (Par), Inst_Node) then -- The parent was a premature instantiation. Insert freeze node at -- the end the current declarative part. if ABE_Is_Certain (Get_Package_Instantiation_Node (Par)) then Insert_Freeze_Node_For_Instance (Inst_Node, F_Node); -- Handle the following case: -- -- package Parent_Inst is new ... -- Parent_Inst [] -- -- procedure P ... -- this body freezes Parent_Inst -- -- package Inst is new ... -- -- In this particular scenario, the freeze node for Inst must be -- inserted in the same manner as that of Parent_Inst - before the -- next source body or at the end of the declarative list (body not -- available). If body P did not exist and Parent_Inst was frozen -- after Inst, either by a body following Inst or at the end of the -- declarative region, the freeze node for Inst must be inserted -- after that of Parent_Inst. This relation is established by -- comparing the Slocs of Parent_Inst freeze node and Inst. elsif List_Containing (Get_Package_Instantiation_Node (Par)) = List_Containing (Inst_Node) and then Sloc (Freeze_Node (Par)) < Sloc (Inst_Node) then Insert_Freeze_Node_For_Instance (Inst_Node, F_Node); else Insert_After (Freeze_Node (Par), F_Node); end if; -- The body enclosing the instance should be frozen after the body that -- includes the generic, because the body of the instance may make -- references to entities therein. If the two are not in the same -- declarative part, or if the one enclosing the instance is frozen -- already, freeze the instance at the end of the current declarative -- part. elsif Is_Generic_Instance (Par) and then Present (Freeze_Node (Par)) and then Present (Enc_I) then if In_Same_Declarative_Part (Freeze_Node (Par), Enc_I) or else (Nkind (Enc_I) = N_Package_Body and then In_Same_Declarative_Part (Freeze_Node (Par), Parent (Enc_I))) then -- The enclosing package may contain several instances. Rather -- than computing the earliest point at which to insert its freeze -- node, we place it at the end of the declarative part of the -- parent of the generic. Insert_Freeze_Node_For_Instance (Freeze_Node (Par), Package_Freeze_Node (Enc_I)); end if; Insert_Freeze_Node_For_Instance (Inst_Node, F_Node); elsif Present (Enc_G) and then Present (Enc_I) and then Enc_G /= Enc_I and then Earlier (Inst_Node, Gen_Body) then if Nkind (Enc_G) = N_Package_Body then E_G_Id := Corresponding_Spec (Enc_G); else pragma Assert (Nkind (Enc_G) = N_Package_Body_Stub); E_G_Id := Corresponding_Spec (Proper_Body (Unit (Library_Unit (Enc_G)))); end if; -- Freeze package that encloses instance, and place node after -- package that encloses generic. If enclosing package is already -- frozen we have to assume it is at the proper place. This may be a -- potential ABE that requires dynamic checking. Do not add a freeze -- node if the package that encloses the generic is inside the body -- that encloses the instance, because the freeze node would be in -- the wrong scope. Additional contortions needed if the bodies are -- within a subunit. declare Enclosing_Body : Node_Id; begin if Nkind (Enc_I) = N_Package_Body_Stub then Enclosing_Body := Proper_Body (Unit (Library_Unit (Enc_I))); else Enclosing_Body := Enc_I; end if; if Parent (List_Containing (Enc_G)) /= Enclosing_Body then Insert_Freeze_Node_For_Instance (Enc_G, Package_Freeze_Node (Enc_I)); end if; end; -- Freeze enclosing subunit before instance Ensure_Freeze_Node (E_G_Id); if not Is_List_Member (Freeze_Node (E_G_Id)) then Insert_After (Enc_G, Freeze_Node (E_G_Id)); end if; Insert_Freeze_Node_For_Instance (Inst_Node, F_Node); else -- If none of the above, insert freeze node at the end of the current -- declarative part. Insert_Freeze_Node_For_Instance (Inst_Node, F_Node); end if; end Freeze_Subprogram_Body; ---------------- -- Get_Gen_Id -- ---------------- function Get_Gen_Id (E : Assoc_Ptr) return Entity_Id is begin return Generic_Renamings.Table (E).Gen_Id; end Get_Gen_Id; --------------------- -- Get_Instance_Of -- --------------------- function Get_Instance_Of (A : Entity_Id) return Entity_Id is Res : constant Assoc_Ptr := Generic_Renamings_HTable.Get (A); begin if Res /= Assoc_Null then return Generic_Renamings.Table (Res).Act_Id; else -- On exit, entity is not instantiated: not a generic parameter, or -- else parameter of an inner generic unit. return A; end if; end Get_Instance_Of; ------------------------------------ -- Get_Package_Instantiation_Node -- ------------------------------------ function Get_Package_Instantiation_Node (A : Entity_Id) return Node_Id is Decl : Node_Id := Unit_Declaration_Node (A); Inst : Node_Id; begin -- If the Package_Instantiation attribute has been set on the package -- entity, then use it directly when it (or its Original_Node) refers -- to an N_Package_Instantiation node. In principle it should be -- possible to have this field set in all cases, which should be -- investigated, and would allow this function to be significantly -- simplified. ??? Inst := Package_Instantiation (A); if Present (Inst) then if Nkind (Inst) = N_Package_Instantiation then return Inst; elsif Nkind (Original_Node (Inst)) = N_Package_Instantiation then return Original_Node (Inst); end if; end if; -- If the instantiation is a compilation unit that does not need body -- then the instantiation node has been rewritten as a package -- declaration for the instance, and we return the original node. -- If it is a compilation unit and the instance node has not been -- rewritten, then it is still the unit of the compilation. Finally, if -- a body is present, this is a parent of the main unit whose body has -- been compiled for inlining purposes, and the instantiation node has -- been rewritten with the instance body. -- Otherwise the instantiation node appears after the declaration. If -- the entity is a formal package, the declaration may have been -- rewritten as a generic declaration (in the case of a formal with box) -- or left as a formal package declaration if it has actuals, and is -- found with a forward search. if Nkind (Parent (Decl)) = N_Compilation_Unit then if Nkind (Decl) = N_Package_Declaration and then Present (Corresponding_Body (Decl)) then Decl := Unit_Declaration_Node (Corresponding_Body (Decl)); end if; if Nkind (Original_Node (Decl)) = N_Package_Instantiation then return Original_Node (Decl); else return Unit (Parent (Decl)); end if; elsif Nkind (Decl) = N_Package_Declaration and then Nkind (Original_Node (Decl)) = N_Formal_Package_Declaration then return Original_Node (Decl); else Inst := Next (Decl); while not Nkind_In (Inst, N_Package_Instantiation, N_Formal_Package_Declaration) loop Next (Inst); end loop; return Inst; end if; end Get_Package_Instantiation_Node; ------------------------ -- Has_Been_Exchanged -- ------------------------ function Has_Been_Exchanged (E : Entity_Id) return Boolean is Next : Elmt_Id; begin Next := First_Elmt (Exchanged_Views); while Present (Next) loop if Full_View (Node (Next)) = E then return True; end if; Next_Elmt (Next); end loop; return False; end Has_Been_Exchanged; ---------- -- Hash -- ---------- function Hash (F : Entity_Id) return HTable_Range is begin return HTable_Range (F mod HTable_Size); end Hash; ------------------------ -- Hide_Current_Scope -- ------------------------ procedure Hide_Current_Scope is C : constant Entity_Id := Current_Scope; E : Entity_Id; begin Set_Is_Hidden_Open_Scope (C); E := First_Entity (C); while Present (E) loop if Is_Immediately_Visible (E) then Set_Is_Immediately_Visible (E, False); Append_Elmt (E, Hidden_Entities); end if; Next_Entity (E); end loop; -- Make the scope name invisible as well. This is necessary, but might -- conflict with calls to Rtsfind later on, in case the scope is a -- predefined one. There is no clean solution to this problem, so for -- now we depend on the user not redefining Standard itself in one of -- the parent units. if Is_Immediately_Visible (C) and then C /= Standard_Standard then Set_Is_Immediately_Visible (C, False); Append_Elmt (C, Hidden_Entities); end if; end Hide_Current_Scope; -------------- -- Init_Env -- -------------- procedure Init_Env is Saved : Instance_Env; begin Saved.Instantiated_Parent := Current_Instantiated_Parent; Saved.Exchanged_Views := Exchanged_Views; Saved.Hidden_Entities := Hidden_Entities; Saved.Current_Sem_Unit := Current_Sem_Unit; Saved.Parent_Unit_Visible := Parent_Unit_Visible; Saved.Instance_Parent_Unit := Instance_Parent_Unit; -- Save configuration switches. These may be reset if the unit is a -- predefined unit, and the current mode is not Ada 2005. Save_Opt_Config_Switches (Saved.Switches); Instance_Envs.Append (Saved); Exchanged_Views := New_Elmt_List; Hidden_Entities := New_Elmt_List; -- Make dummy entry for Instantiated parent. If generic unit is legal, -- this is set properly in Set_Instance_Env. Current_Instantiated_Parent := (Current_Scope, Current_Scope, Assoc_Null); end Init_Env; ------------------------------ -- In_Same_Declarative_Part -- ------------------------------ function In_Same_Declarative_Part (F_Node : Node_Id; Inst : Node_Id) return Boolean is Decls : constant Node_Id := Parent (F_Node); Nod : Node_Id := Parent (Inst); begin while Present (Nod) loop if Nod = Decls then return True; elsif Nkind_In (Nod, N_Subprogram_Body, N_Package_Body, N_Package_Declaration, N_Task_Body, N_Protected_Body, N_Block_Statement) then return False; elsif Nkind (Nod) = N_Subunit then Nod := Corresponding_Stub (Nod); elsif Nkind (Nod) = N_Compilation_Unit then return False; else Nod := Parent (Nod); end if; end loop; return False; end In_Same_Declarative_Part; --------------------- -- In_Main_Context -- --------------------- function In_Main_Context (E : Entity_Id) return Boolean is Context : List_Id; Clause : Node_Id; Nam : Node_Id; begin if not Is_Compilation_Unit (E) or else Ekind (E) /= E_Package or else In_Private_Part (E) then return False; end if; Context := Context_Items (Cunit (Main_Unit)); Clause := First (Context); while Present (Clause) loop if Nkind (Clause) = N_With_Clause then Nam := Name (Clause); -- If the current scope is part of the context of the main unit, -- analysis of the corresponding with_clause is not complete, and -- the entity is not set. We use the Chars field directly, which -- might produce false positives in rare cases, but guarantees -- that we produce all the instance bodies we will need. if (Is_Entity_Name (Nam) and then Chars (Nam) = Chars (E)) or else (Nkind (Nam) = N_Selected_Component and then Chars (Selector_Name (Nam)) = Chars (E)) then return True; end if; end if; Next (Clause); end loop; return False; end In_Main_Context; --------------------- -- Inherit_Context -- --------------------- procedure Inherit_Context (Gen_Decl : Node_Id; Inst : Node_Id) is Current_Context : List_Id; Current_Unit : Node_Id; Item : Node_Id; New_I : Node_Id; begin if Nkind (Parent (Gen_Decl)) = N_Compilation_Unit then -- The inherited context is attached to the enclosing compilation -- unit. This is either the main unit, or the declaration for the -- main unit (in case the instantiation appears within the package -- declaration and the main unit is its body). Current_Unit := Parent (Inst); while Present (Current_Unit) and then Nkind (Current_Unit) /= N_Compilation_Unit loop Current_Unit := Parent (Current_Unit); end loop; Current_Context := Context_Items (Current_Unit); Item := First (Context_Items (Parent (Gen_Decl))); while Present (Item) loop if Nkind (Item) = N_With_Clause then -- Take care to prevent direct cyclic with's, which can happen -- if the generic body with's the current unit. Such a case -- would result in binder errors (or run-time errors if the -- -gnatE switch is in effect), but we want to prevent it here, -- because Sem.Walk_Library_Items doesn't like cycles. Note -- that we don't bother to detect indirect cycles. if Library_Unit (Item) /= Current_Unit then New_I := New_Copy (Item); Set_Implicit_With (New_I, True); Append (New_I, Current_Context); end if; end if; Next (Item); end loop; end if; end Inherit_Context; ---------------- -- Initialize -- ---------------- procedure Initialize is begin Generic_Renamings.Init; Instance_Envs.Init; Generic_Flags.Init; Generic_Renamings_HTable.Reset; Circularity_Detected := False; Exchanged_Views := No_Elist; Hidden_Entities := No_Elist; end Initialize; ------------------------------------- -- Insert_Freeze_Node_For_Instance -- ------------------------------------- procedure Insert_Freeze_Node_For_Instance (N : Node_Id; F_Node : Node_Id) is Inst : constant Entity_Id := Entity (F_Node); Decl : Node_Id; Decls : List_Id; Par_N : Node_Id; function Enclosing_Body (N : Node_Id) return Node_Id; -- Find enclosing package or subprogram body, if any. Freeze node -- may be placed at end of current declarative list if previous -- instance and current one have different enclosing bodies. function Previous_Instance (Gen : Entity_Id) return Entity_Id; -- Find the local instance, if any, that declares the generic that is -- being instantiated. If present, the freeze node for this instance -- must follow the freeze node for the previous instance. -------------------- -- Enclosing_Body -- -------------------- function Enclosing_Body (N : Node_Id) return Node_Id is P : Node_Id; begin P := Parent (N); while Present (P) and then Nkind (Parent (P)) /= N_Compilation_Unit loop if Nkind_In (P, N_Package_Body, N_Subprogram_Body) then if Nkind (Parent (P)) = N_Subunit then return Corresponding_Stub (Parent (P)); else return P; end if; end if; P := True_Parent (P); end loop; return Empty; end Enclosing_Body; ----------------------- -- Previous_Instance -- ----------------------- function Previous_Instance (Gen : Entity_Id) return Entity_Id is S : Entity_Id; begin S := Scope (Gen); while Present (S) and then S /= Standard_Standard loop if Is_Generic_Instance (S) and then In_Same_Source_Unit (S, N) then return S; end if; S := Scope (S); end loop; return Empty; end Previous_Instance; -- Start of processing for Insert_Freeze_Node_For_Instance begin if not Is_List_Member (F_Node) then Decls := List_Containing (N); Par_N := Parent (Decls); Decl := N; -- If this is a package instance, check whether the generic is -- declared in a previous instance and the current instance is -- not within the previous one. if Present (Generic_Parent (Parent (Inst))) and then Is_In_Main_Unit (N) then declare Enclosing_N : constant Node_Id := Enclosing_Body (N); Par_I : constant Entity_Id := Previous_Instance (Generic_Parent (Parent (Inst))); Scop : Entity_Id; begin if Present (Par_I) and then Earlier (N, Freeze_Node (Par_I)) then Scop := Scope (Inst); -- If the current instance is within the one that contains -- the generic, the freeze node for the current one must -- appear in the current declarative part. Ditto, if the -- current instance is within another package instance or -- within a body that does not enclose the current instance. -- In these three cases the freeze node of the previous -- instance is not relevant. while Present (Scop) and then Scop /= Standard_Standard loop exit when Scop = Par_I or else (Is_Generic_Instance (Scop) and then Scope_Depth (Scop) > Scope_Depth (Par_I)); Scop := Scope (Scop); end loop; -- Previous instance encloses current instance if Scop = Par_I then null; -- If the next node is a source body we must freeze in -- the current scope as well. elsif Present (Next (N)) and then Nkind_In (Next (N), N_Subprogram_Body, N_Package_Body) and then Comes_From_Source (Next (N)) then null; -- Current instance is within an unrelated instance elsif Is_Generic_Instance (Scop) then null; -- Current instance is within an unrelated body elsif Present (Enclosing_N) and then Enclosing_N /= Enclosing_Body (Par_I) then null; else Insert_After (Freeze_Node (Par_I), F_Node); return; end if; end if; end; end if; -- When the instantiation occurs in a package declaration, append the -- freeze node to the private declarations (if any). if Nkind (Par_N) = N_Package_Specification and then Decls = Visible_Declarations (Par_N) and then Present (Private_Declarations (Par_N)) and then not Is_Empty_List (Private_Declarations (Par_N)) then Decls := Private_Declarations (Par_N); Decl := First (Decls); end if; -- Determine the proper freeze point of a package instantiation. We -- adhere to the general rule of a package or subprogram body causing -- freezing of anything before it in the same declarative region. In -- this case, the proper freeze point of a package instantiation is -- before the first source body which follows, or before a stub. This -- ensures that entities coming from the instance are already frozen -- and usable in source bodies. if Nkind (Par_N) /= N_Package_Declaration and then Ekind (Inst) = E_Package and then Is_Generic_Instance (Inst) and then not In_Same_Source_Unit (Generic_Parent (Parent (Inst)), Inst) then while Present (Decl) loop if (Nkind (Decl) in N_Unit_Body or else Nkind (Decl) in N_Body_Stub) and then Comes_From_Source (Decl) then Insert_Before (Decl, F_Node); return; end if; Next (Decl); end loop; end if; -- In a package declaration, or if no previous body, insert at end -- of list. Set_Sloc (F_Node, Sloc (Last (Decls))); Insert_After (Last (Decls), F_Node); end if; end Insert_Freeze_Node_For_Instance; ------------------ -- Install_Body -- ------------------ procedure Install_Body (Act_Body : Node_Id; N : Node_Id; Gen_Body : Node_Id; Gen_Decl : Node_Id) is Act_Id : constant Entity_Id := Corresponding_Spec (Act_Body); Act_Unit : constant Node_Id := Unit (Cunit (Get_Source_Unit (N))); Gen_Id : constant Entity_Id := Corresponding_Spec (Gen_Body); Par : constant Entity_Id := Scope (Gen_Id); Gen_Unit : constant Node_Id := Unit (Cunit (Get_Source_Unit (Gen_Decl))); Orig_Body : Node_Id := Gen_Body; F_Node : Node_Id; Body_Unit : Node_Id; Must_Delay : Boolean; function Enclosing_Subp (Id : Entity_Id) return Entity_Id; -- Find subprogram (if any) that encloses instance and/or generic body function True_Sloc (N : Node_Id) return Source_Ptr; -- If the instance is nested inside a generic unit, the Sloc of the -- instance indicates the place of the original definition, not the -- point of the current enclosing instance. Pending a better usage of -- Slocs to indicate instantiation places, we determine the place of -- origin of a node by finding the maximum sloc of any ancestor node. -- Why is this not equivalent to Top_Level_Location ??? -------------------- -- Enclosing_Subp -- -------------------- function Enclosing_Subp (Id : Entity_Id) return Entity_Id is Scop : Entity_Id; begin Scop := Scope (Id); while Scop /= Standard_Standard and then not Is_Overloadable (Scop) loop Scop := Scope (Scop); end loop; return Scop; end Enclosing_Subp; --------------- -- True_Sloc -- --------------- function True_Sloc (N : Node_Id) return Source_Ptr is Res : Source_Ptr; N1 : Node_Id; begin Res := Sloc (N); N1 := N; while Present (N1) and then N1 /= Act_Unit loop if Sloc (N1) > Res then Res := Sloc (N1); end if; N1 := Parent (N1); end loop; return Res; end True_Sloc; -- Start of processing for Install_Body begin -- If the body is a subunit, the freeze point is the corresponding stub -- in the current compilation, not the subunit itself. if Nkind (Parent (Gen_Body)) = N_Subunit then Orig_Body := Corresponding_Stub (Parent (Gen_Body)); else Orig_Body := Gen_Body; end if; Body_Unit := Unit (Cunit (Get_Source_Unit (Orig_Body))); -- If the instantiation and the generic definition appear in the same -- package declaration, this is an early instantiation. If they appear -- in the same declarative part, it is an early instantiation only if -- the generic body appears textually later, and the generic body is -- also in the main unit. -- If instance is nested within a subprogram, and the generic body is -- not, the instance is delayed because the enclosing body is. If -- instance and body are within the same scope, or the same sub- -- program body, indicate explicitly that the instance is delayed. Must_Delay := (Gen_Unit = Act_Unit and then (Nkind_In (Gen_Unit, N_Package_Declaration, N_Generic_Package_Declaration) or else (Gen_Unit = Body_Unit and then True_Sloc (N) < Sloc (Orig_Body))) and then Is_In_Main_Unit (Gen_Unit) and then (Scope (Act_Id) = Scope (Gen_Id) or else Enclosing_Subp (Act_Id) = Enclosing_Subp (Gen_Id))); -- If this is an early instantiation, the freeze node is placed after -- the generic body. Otherwise, if the generic appears in an instance, -- we cannot freeze the current instance until the outer one is frozen. -- This is only relevant if the current instance is nested within some -- inner scope not itself within the outer instance. If this scope is -- a package body in the same declarative part as the outer instance, -- then that body needs to be frozen after the outer instance. Finally, -- if no delay is needed, we place the freeze node at the end of the -- current declarative part. if Expander_Active then Ensure_Freeze_Node (Act_Id); F_Node := Freeze_Node (Act_Id); if Must_Delay then Insert_After (Orig_Body, F_Node); elsif Is_Generic_Instance (Par) and then Present (Freeze_Node (Par)) and then Scope (Act_Id) /= Par then -- Freeze instance of inner generic after instance of enclosing -- generic. if In_Same_Declarative_Part (Freeze_Node (Par), N) then -- Handle the following case: -- package Parent_Inst is new ... -- Parent_Inst [] -- procedure P ... -- this body freezes Parent_Inst -- package Inst is new ... -- In this particular scenario, the freeze node for Inst must -- be inserted in the same manner as that of Parent_Inst - -- before the next source body or at the end of the declarative -- list (body not available). If body P did not exist and -- Parent_Inst was frozen after Inst, either by a body -- following Inst or at the end of the declarative region, the -- freeze node for Inst must be inserted after that of -- Parent_Inst. This relation is established by comparing the -- Slocs of Parent_Inst freeze node and Inst. if List_Containing (Get_Package_Instantiation_Node (Par)) = List_Containing (N) and then Sloc (Freeze_Node (Par)) < Sloc (N) then Insert_Freeze_Node_For_Instance (N, F_Node); else Insert_After (Freeze_Node (Par), F_Node); end if; -- Freeze package enclosing instance of inner generic after -- instance of enclosing generic. elsif Nkind_In (Parent (N), N_Package_Body, N_Subprogram_Body) and then In_Same_Declarative_Part (Freeze_Node (Par), Parent (N)) then declare Enclosing : Entity_Id; begin Enclosing := Corresponding_Spec (Parent (N)); if No (Enclosing) then Enclosing := Defining_Entity (Parent (N)); end if; Insert_Freeze_Node_For_Instance (N, F_Node); Ensure_Freeze_Node (Enclosing); if not Is_List_Member (Freeze_Node (Enclosing)) then -- The enclosing context is a subunit, insert the freeze -- node after the stub. if Nkind (Parent (Parent (N))) = N_Subunit then Insert_Freeze_Node_For_Instance (Corresponding_Stub (Parent (Parent (N))), Freeze_Node (Enclosing)); -- The enclosing context is a package with a stub body -- which has already been replaced by the real body. -- Insert the freeze node after the actual body. elsif Ekind (Enclosing) = E_Package and then Present (Body_Entity (Enclosing)) and then Was_Originally_Stub (Parent (Body_Entity (Enclosing))) then Insert_Freeze_Node_For_Instance (Parent (Body_Entity (Enclosing)), Freeze_Node (Enclosing)); -- The parent instance has been frozen before the body of -- the enclosing package, insert the freeze node after -- the body. elsif List_Containing (Freeze_Node (Par)) = List_Containing (Parent (N)) and then Sloc (Freeze_Node (Par)) < Sloc (Parent (N)) then Insert_Freeze_Node_For_Instance (Parent (N), Freeze_Node (Enclosing)); else Insert_After (Freeze_Node (Par), Freeze_Node (Enclosing)); end if; end if; end; else Insert_Freeze_Node_For_Instance (N, F_Node); end if; else Insert_Freeze_Node_For_Instance (N, F_Node); end if; end if; Set_Is_Frozen (Act_Id); Insert_Before (N, Act_Body); Mark_Rewrite_Insertion (Act_Body); end Install_Body; ----------------------------- -- Install_Formal_Packages -- ----------------------------- procedure Install_Formal_Packages (Par : Entity_Id) is E : Entity_Id; Gen : Entity_Id; Gen_E : Entity_Id := Empty; begin E := First_Entity (Par); -- If we are installing an instance parent, locate the formal packages -- of its generic parent. if Is_Generic_Instance (Par) then Gen := Generic_Parent (Specification (Unit_Declaration_Node (Par))); Gen_E := First_Entity (Gen); end if; while Present (E) loop if Ekind (E) = E_Package and then Nkind (Parent (E)) = N_Package_Renaming_Declaration then -- If this is the renaming for the parent instance, done if Renamed_Object (E) = Par then exit; -- The visibility of a formal of an enclosing generic is already -- correct. elsif Denotes_Formal_Package (E) then null; elsif Present (Associated_Formal_Package (E)) then Check_Generic_Actuals (Renamed_Object (E), True); Set_Is_Hidden (E, False); -- Find formal package in generic unit that corresponds to -- (instance of) formal package in instance. while Present (Gen_E) and then Chars (Gen_E) /= Chars (E) loop Next_Entity (Gen_E); end loop; if Present (Gen_E) then Map_Formal_Package_Entities (Gen_E, E); end if; end if; end if; Next_Entity (E); if Present (Gen_E) then Next_Entity (Gen_E); end if; end loop; end Install_Formal_Packages; -------------------- -- Install_Parent -- -------------------- procedure Install_Parent (P : Entity_Id; In_Body : Boolean := False) is Ancestors : constant Elist_Id := New_Elmt_List; S : constant Entity_Id := Current_Scope; Inst_Par : Entity_Id; First_Par : Entity_Id; Inst_Node : Node_Id; Gen_Par : Entity_Id; First_Gen : Entity_Id; Elmt : Elmt_Id; procedure Install_Noninstance_Specs (Par : Entity_Id); -- Install the scopes of noninstance parent units ending with Par procedure Install_Spec (Par : Entity_Id); -- The child unit is within the declarative part of the parent, so -- the declarations within the parent are immediately visible. ------------------------------- -- Install_Noninstance_Specs -- ------------------------------- procedure Install_Noninstance_Specs (Par : Entity_Id) is begin if Present (Par) and then Par /= Standard_Standard and then not In_Open_Scopes (Par) then Install_Noninstance_Specs (Scope (Par)); Install_Spec (Par); end if; end Install_Noninstance_Specs; ------------------ -- Install_Spec -- ------------------ procedure Install_Spec (Par : Entity_Id) is Spec : constant Node_Id := Specification (Unit_Declaration_Node (Par)); begin -- If this parent of the child instance is a top-level unit, -- then record the unit and its visibility for later resetting -- in Remove_Parent. We exclude units that are generic instances, -- as we only want to record this information for the ultimate -- top-level noninstance parent (is that always correct???). if Scope (Par) = Standard_Standard and then not Is_Generic_Instance (Par) then Parent_Unit_Visible := Is_Immediately_Visible (Par); Instance_Parent_Unit := Par; end if; -- Open the parent scope and make it and its declarations visible. -- If this point is not within a body, then only the visible -- declarations should be made visible, and installation of the -- private declarations is deferred until the appropriate point -- within analysis of the spec being instantiated (see the handling -- of parent visibility in Analyze_Package_Specification). This is -- relaxed in the case where the parent unit is Ada.Tags, to avoid -- private view problems that occur when compiling instantiations of -- a generic child of that package (Generic_Dispatching_Constructor). -- If the instance freezes a tagged type, inlinings of operations -- from Ada.Tags may need the full view of type Tag. If inlining took -- proper account of establishing visibility of inlined subprograms' -- parents then it should be possible to remove this -- special check. ??? Push_Scope (Par); Set_Is_Immediately_Visible (Par); Install_Visible_Declarations (Par); Set_Use (Visible_Declarations (Spec)); if In_Body or else Is_RTU (Par, Ada_Tags) then Install_Private_Declarations (Par); Set_Use (Private_Declarations (Spec)); end if; end Install_Spec; -- Start of processing for Install_Parent begin -- We need to install the parent instance to compile the instantiation -- of the child, but the child instance must appear in the current -- scope. Given that we cannot place the parent above the current scope -- in the scope stack, we duplicate the current scope and unstack both -- after the instantiation is complete. -- If the parent is itself the instantiation of a child unit, we must -- also stack the instantiation of its parent, and so on. Each such -- ancestor is the prefix of the name in a prior instantiation. -- If this is a nested instance, the parent unit itself resolves to -- a renaming of the parent instance, whose declaration we need. -- Finally, the parent may be a generic (not an instance) when the -- child unit appears as a formal package. Inst_Par := P; if Present (Renamed_Entity (Inst_Par)) then Inst_Par := Renamed_Entity (Inst_Par); end if; First_Par := Inst_Par; Gen_Par := Generic_Parent (Specification (Unit_Declaration_Node (Inst_Par))); First_Gen := Gen_Par; while Present (Gen_Par) and then Is_Child_Unit (Gen_Par) loop -- Load grandparent instance as well Inst_Node := Get_Package_Instantiation_Node (Inst_Par); if Nkind (Name (Inst_Node)) = N_Expanded_Name then Inst_Par := Entity (Prefix (Name (Inst_Node))); if Present (Renamed_Entity (Inst_Par)) then Inst_Par := Renamed_Entity (Inst_Par); end if; Gen_Par := Generic_Parent (Specification (Unit_Declaration_Node (Inst_Par))); if Present (Gen_Par) then Prepend_Elmt (Inst_Par, Ancestors); else -- Parent is not the name of an instantiation Install_Noninstance_Specs (Inst_Par); exit; end if; else -- Previous error exit; end if; end loop; if Present (First_Gen) then Append_Elmt (First_Par, Ancestors); else Install_Noninstance_Specs (First_Par); end if; if not Is_Empty_Elmt_List (Ancestors) then Elmt := First_Elmt (Ancestors); while Present (Elmt) loop Install_Spec (Node (Elmt)); Install_Formal_Packages (Node (Elmt)); Next_Elmt (Elmt); end loop; end if; if not In_Body then Push_Scope (S); end if; end Install_Parent; ------------------------------- -- Install_Hidden_Primitives -- ------------------------------- procedure Install_Hidden_Primitives (Prims_List : in out Elist_Id; Gen_T : Entity_Id; Act_T : Entity_Id) is Elmt : Elmt_Id; List : Elist_Id := No_Elist; Prim_G_Elmt : Elmt_Id; Prim_A_Elmt : Elmt_Id; Prim_G : Node_Id; Prim_A : Node_Id; begin -- No action needed in case of serious errors because we cannot trust -- in the order of primitives if Serious_Errors_Detected > 0 then return; -- No action possible if we don't have available the list of primitive -- operations elsif No (Gen_T) or else not Is_Record_Type (Gen_T) or else not Is_Tagged_Type (Gen_T) or else not Is_Record_Type (Act_T) or else not Is_Tagged_Type (Act_T) then return; -- There is no need to handle interface types since their primitives -- cannot be hidden elsif Is_Interface (Gen_T) then return; end if; Prim_G_Elmt := First_Elmt (Primitive_Operations (Gen_T)); if not Is_Class_Wide_Type (Act_T) then Prim_A_Elmt := First_Elmt (Primitive_Operations (Act_T)); else Prim_A_Elmt := First_Elmt (Primitive_Operations (Root_Type (Act_T))); end if; loop -- Skip predefined primitives in the generic formal while Present (Prim_G_Elmt) and then Is_Predefined_Dispatching_Operation (Node (Prim_G_Elmt)) loop Next_Elmt (Prim_G_Elmt); end loop; -- Skip predefined primitives in the generic actual while Present (Prim_A_Elmt) and then Is_Predefined_Dispatching_Operation (Node (Prim_A_Elmt)) loop Next_Elmt (Prim_A_Elmt); end loop; exit when No (Prim_G_Elmt) or else No (Prim_A_Elmt); Prim_G := Node (Prim_G_Elmt); Prim_A := Node (Prim_A_Elmt); -- There is no need to handle interface primitives because their -- primitives are not hidden exit when Present (Interface_Alias (Prim_G)); -- Here we install one hidden primitive if Chars (Prim_G) /= Chars (Prim_A) and then Has_Suffix (Prim_A, 'P') and then Remove_Suffix (Prim_A, 'P') = Chars (Prim_G) then Set_Chars (Prim_A, Chars (Prim_G)); if List = No_Elist then List := New_Elmt_List; end if; Append_Elmt (Prim_A, List); end if; Next_Elmt (Prim_A_Elmt); Next_Elmt (Prim_G_Elmt); end loop; -- Append the elements to the list of temporarily visible primitives -- avoiding duplicates. if Present (List) then if No (Prims_List) then Prims_List := New_Elmt_List; end if; Elmt := First_Elmt (List); while Present (Elmt) loop Append_Unique_Elmt (Node (Elmt), Prims_List); Next_Elmt (Elmt); end loop; end if; end Install_Hidden_Primitives; ------------------------------- -- Restore_Hidden_Primitives -- ------------------------------- procedure Restore_Hidden_Primitives (Prims_List : in out Elist_Id) is Prim_Elmt : Elmt_Id; Prim : Node_Id; begin if Prims_List /= No_Elist then Prim_Elmt := First_Elmt (Prims_List); while Present (Prim_Elmt) loop Prim := Node (Prim_Elmt); Set_Chars (Prim, Add_Suffix (Prim, 'P')); Next_Elmt (Prim_Elmt); end loop; Prims_List := No_Elist; end if; end Restore_Hidden_Primitives; -------------------------------- -- Instantiate_Formal_Package -- -------------------------------- function Instantiate_Formal_Package (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id) return List_Id is Loc : constant Source_Ptr := Sloc (Actual); Actual_Pack : Entity_Id; Formal_Pack : Entity_Id; Gen_Parent : Entity_Id; Decls : List_Id; Nod : Node_Id; Parent_Spec : Node_Id; procedure Find_Matching_Actual (F : Node_Id; Act : in out Entity_Id); -- We need to associate each formal entity in the formal package -- with the corresponding entity in the actual package. The actual -- package has been analyzed and possibly expanded, and as a result -- there is no one-to-one correspondence between the two lists (for -- example, the actual may include subtypes, itypes, and inherited -- primitive operations, interspersed among the renaming declarations -- for the actuals) . We retrieve the corresponding actual by name -- because each actual has the same name as the formal, and they do -- appear in the same order. function Get_Formal_Entity (N : Node_Id) return Entity_Id; -- Retrieve entity of defining entity of generic formal parameter. -- Only the declarations of formals need to be considered when -- linking them to actuals, but the declarative list may include -- internal entities generated during analysis, and those are ignored. procedure Match_Formal_Entity (Formal_Node : Node_Id; Formal_Ent : Entity_Id; Actual_Ent : Entity_Id); -- Associates the formal entity with the actual. In the case -- where Formal_Ent is a formal package, this procedure iterates -- through all of its formals and enters associations between the -- actuals occurring in the formal package's corresponding actual -- package (given by Actual_Ent) and the formal package's formal -- parameters. This procedure recurses if any of the parameters is -- itself a package. function Is_Instance_Of (Act_Spec : Entity_Id; Gen_Anc : Entity_Id) return Boolean; -- The actual can be an instantiation of a generic within another -- instance, in which case there is no direct link from it to the -- original generic ancestor. In that case, we recognize that the -- ultimate ancestor is the same by examining names and scopes. procedure Process_Nested_Formal (Formal : Entity_Id); -- If the current formal is declared with a box, its own formals are -- visible in the instance, as they were in the generic, and their -- Hidden flag must be reset. If some of these formals are themselves -- packages declared with a box, the processing must be recursive. -------------------------- -- Find_Matching_Actual -- -------------------------- procedure Find_Matching_Actual (F : Node_Id; Act : in out Entity_Id) is Formal_Ent : Entity_Id; begin case Nkind (Original_Node (F)) is when N_Formal_Object_Declaration | N_Formal_Type_Declaration => Formal_Ent := Defining_Identifier (F); while Chars (Act) /= Chars (Formal_Ent) loop Next_Entity (Act); end loop; when N_Formal_Subprogram_Declaration | N_Formal_Package_Declaration | N_Package_Declaration | N_Generic_Package_Declaration => Formal_Ent := Defining_Entity (F); while Chars (Act) /= Chars (Formal_Ent) loop Next_Entity (Act); end loop; when others => raise Program_Error; end case; end Find_Matching_Actual; ------------------------- -- Match_Formal_Entity -- ------------------------- procedure Match_Formal_Entity (Formal_Node : Node_Id; Formal_Ent : Entity_Id; Actual_Ent : Entity_Id) is Act_Pkg : Entity_Id; begin Set_Instance_Of (Formal_Ent, Actual_Ent); if Ekind (Actual_Ent) = E_Package then -- Record associations for each parameter Act_Pkg := Actual_Ent; declare A_Ent : Entity_Id := First_Entity (Act_Pkg); F_Ent : Entity_Id; F_Node : Node_Id; Gen_Decl : Node_Id; Formals : List_Id; Actual : Entity_Id; begin -- Retrieve the actual given in the formal package declaration Actual := Entity (Name (Original_Node (Formal_Node))); -- The actual in the formal package declaration may be a -- renamed generic package, in which case we want to retrieve -- the original generic in order to traverse its formal part. if Present (Renamed_Entity (Actual)) then Gen_Decl := Unit_Declaration_Node (Renamed_Entity (Actual)); else Gen_Decl := Unit_Declaration_Node (Actual); end if; Formals := Generic_Formal_Declarations (Gen_Decl); if Present (Formals) then F_Node := First_Non_Pragma (Formals); else F_Node := Empty; end if; while Present (A_Ent) and then Present (F_Node) and then A_Ent /= First_Private_Entity (Act_Pkg) loop F_Ent := Get_Formal_Entity (F_Node); if Present (F_Ent) then -- This is a formal of the original package. Record -- association and recurse. Find_Matching_Actual (F_Node, A_Ent); Match_Formal_Entity (F_Node, F_Ent, A_Ent); Next_Entity (A_Ent); end if; Next_Non_Pragma (F_Node); end loop; end; end if; end Match_Formal_Entity; ----------------------- -- Get_Formal_Entity -- ----------------------- function Get_Formal_Entity (N : Node_Id) return Entity_Id is Kind : constant Node_Kind := Nkind (Original_Node (N)); begin case Kind is when N_Formal_Object_Declaration => return Defining_Identifier (N); when N_Formal_Type_Declaration => return Defining_Identifier (N); when N_Formal_Subprogram_Declaration => return Defining_Unit_Name (Specification (N)); when N_Formal_Package_Declaration => return Defining_Identifier (Original_Node (N)); when N_Generic_Package_Declaration => return Defining_Identifier (Original_Node (N)); -- All other declarations are introduced by semantic analysis and -- have no match in the actual. when others => return Empty; end case; end Get_Formal_Entity; -------------------- -- Is_Instance_Of -- -------------------- function Is_Instance_Of (Act_Spec : Entity_Id; Gen_Anc : Entity_Id) return Boolean is Gen_Par : constant Entity_Id := Generic_Parent (Act_Spec); begin if No (Gen_Par) then return False; -- Simplest case: the generic parent of the actual is the formal elsif Gen_Par = Gen_Anc then return True; elsif Chars (Gen_Par) /= Chars (Gen_Anc) then return False; -- The actual may be obtained through several instantiations. Its -- scope must itself be an instance of a generic declared in the -- same scope as the formal. Any other case is detected above. elsif not Is_Generic_Instance (Scope (Gen_Par)) then return False; else return Generic_Parent (Parent (Scope (Gen_Par))) = Scope (Gen_Anc); end if; end Is_Instance_Of; --------------------------- -- Process_Nested_Formal -- --------------------------- procedure Process_Nested_Formal (Formal : Entity_Id) is Ent : Entity_Id; begin if Present (Associated_Formal_Package (Formal)) and then Box_Present (Parent (Associated_Formal_Package (Formal))) then Ent := First_Entity (Formal); while Present (Ent) loop Set_Is_Hidden (Ent, False); Set_Is_Visible_Formal (Ent); Set_Is_Potentially_Use_Visible (Ent, Is_Potentially_Use_Visible (Formal)); if Ekind (Ent) = E_Package then exit when Renamed_Entity (Ent) = Renamed_Entity (Formal); Process_Nested_Formal (Ent); end if; Next_Entity (Ent); end loop; end if; end Process_Nested_Formal; -- Start of processing for Instantiate_Formal_Package begin Analyze (Actual); if not Is_Entity_Name (Actual) or else Ekind (Entity (Actual)) /= E_Package then Error_Msg_N ("expect package instance to instantiate formal", Actual); Abandon_Instantiation (Actual); raise Program_Error; else Actual_Pack := Entity (Actual); Set_Is_Instantiated (Actual_Pack); -- The actual may be a renamed package, or an outer generic formal -- package whose instantiation is converted into a renaming. if Present (Renamed_Object (Actual_Pack)) then Actual_Pack := Renamed_Object (Actual_Pack); end if; if Nkind (Analyzed_Formal) = N_Formal_Package_Declaration then Gen_Parent := Get_Instance_Of (Entity (Name (Analyzed_Formal))); Formal_Pack := Defining_Identifier (Analyzed_Formal); else Gen_Parent := Generic_Parent (Specification (Analyzed_Formal)); Formal_Pack := Defining_Unit_Name (Specification (Analyzed_Formal)); end if; if Nkind (Parent (Actual_Pack)) = N_Defining_Program_Unit_Name then Parent_Spec := Specification (Unit_Declaration_Node (Actual_Pack)); else Parent_Spec := Parent (Actual_Pack); end if; if Gen_Parent = Any_Id then Error_Msg_N ("previous error in declaration of formal package", Actual); Abandon_Instantiation (Actual); elsif Is_Instance_Of (Parent_Spec, Get_Instance_Of (Gen_Parent)) then null; else Error_Msg_NE ("actual parameter must be instance of&", Actual, Gen_Parent); Abandon_Instantiation (Actual); end if; Set_Instance_Of (Defining_Identifier (Formal), Actual_Pack); Map_Formal_Package_Entities (Formal_Pack, Actual_Pack); Nod := Make_Package_Renaming_Declaration (Loc, Defining_Unit_Name => New_Copy (Defining_Identifier (Formal)), Name => New_Reference_To (Actual_Pack, Loc)); Set_Associated_Formal_Package (Defining_Unit_Name (Nod), Defining_Identifier (Formal)); Decls := New_List (Nod); -- If the formal F has a box, then the generic declarations are -- visible in the generic G. In an instance of G, the corresponding -- entities in the actual for F (which are the actuals for the -- instantiation of the generic that F denotes) must also be made -- visible for analysis of the current instance. On exit from the -- current instance, those entities are made private again. If the -- actual is currently in use, these entities are also use-visible. -- The loop through the actual entities also steps through the formal -- entities and enters associations from formals to actuals into the -- renaming map. This is necessary to properly handle checking of -- actual parameter associations for later formals that depend on -- actuals declared in the formal package. -- In Ada 2005, partial parametrization requires that we make visible -- the actuals corresponding to formals that were defaulted in the -- formal package. There formals are identified because they remain -- formal generics within the formal package, rather than being -- renamings of the actuals supplied. declare Gen_Decl : constant Node_Id := Unit_Declaration_Node (Gen_Parent); Formals : constant List_Id := Generic_Formal_Declarations (Gen_Decl); Actual_Ent : Entity_Id; Actual_Of_Formal : Node_Id; Formal_Node : Node_Id; Formal_Ent : Entity_Id; begin if Present (Formals) then Formal_Node := First_Non_Pragma (Formals); else Formal_Node := Empty; end if; Actual_Ent := First_Entity (Actual_Pack); Actual_Of_Formal := First (Visible_Declarations (Specification (Analyzed_Formal))); while Present (Actual_Ent) and then Actual_Ent /= First_Private_Entity (Actual_Pack) loop if Present (Formal_Node) then Formal_Ent := Get_Formal_Entity (Formal_Node); if Present (Formal_Ent) then Find_Matching_Actual (Formal_Node, Actual_Ent); Match_Formal_Entity (Formal_Node, Formal_Ent, Actual_Ent); -- We iterate at the same time over the actuals of the -- local package created for the formal, to determine -- which one of the formals of the original generic were -- defaulted in the formal. The corresponding actual -- entities are visible in the enclosing instance. if Box_Present (Formal) or else (Present (Actual_Of_Formal) and then Is_Generic_Formal (Get_Formal_Entity (Actual_Of_Formal))) then Set_Is_Hidden (Actual_Ent, False); Set_Is_Visible_Formal (Actual_Ent); Set_Is_Potentially_Use_Visible (Actual_Ent, In_Use (Actual_Pack)); if Ekind (Actual_Ent) = E_Package then Process_Nested_Formal (Actual_Ent); end if; else Set_Is_Hidden (Actual_Ent); Set_Is_Potentially_Use_Visible (Actual_Ent, False); end if; end if; Next_Non_Pragma (Formal_Node); Next (Actual_Of_Formal); else -- No further formals to match, but the generic part may -- contain inherited operation that are not hidden in the -- enclosing instance. Next_Entity (Actual_Ent); end if; end loop; -- Inherited subprograms generated by formal derived types are -- also visible if the types are. Actual_Ent := First_Entity (Actual_Pack); while Present (Actual_Ent) and then Actual_Ent /= First_Private_Entity (Actual_Pack) loop if Is_Overloadable (Actual_Ent) and then Nkind (Parent (Actual_Ent)) = N_Subtype_Declaration and then not Is_Hidden (Defining_Identifier (Parent (Actual_Ent))) then Set_Is_Hidden (Actual_Ent, False); Set_Is_Potentially_Use_Visible (Actual_Ent, In_Use (Actual_Pack)); end if; Next_Entity (Actual_Ent); end loop; end; -- If the formal is not declared with a box, reanalyze it as an -- abbreviated instantiation, to verify the matching rules of 12.7. -- The actual checks are performed after the generic associations -- have been analyzed, to guarantee the same visibility for this -- instantiation and for the actuals. -- In Ada 2005, the generic associations for the formal can include -- defaulted parameters. These are ignored during check. This -- internal instantiation is removed from the tree after conformance -- checking, because it contains formal declarations for those -- defaulted parameters, and those should not reach the back-end. if not Box_Present (Formal) then declare I_Pack : constant Entity_Id := Make_Temporary (Sloc (Actual), 'P'); begin Set_Is_Internal (I_Pack); Append_To (Decls, Make_Package_Instantiation (Sloc (Actual), Defining_Unit_Name => I_Pack, Name => New_Occurrence_Of (Get_Instance_Of (Gen_Parent), Sloc (Actual)), Generic_Associations => Generic_Associations (Formal))); end; end if; return Decls; end if; end Instantiate_Formal_Package; ----------------------------------- -- Instantiate_Formal_Subprogram -- ----------------------------------- function Instantiate_Formal_Subprogram (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id) return Node_Id is Loc : Source_Ptr; Formal_Sub : constant Entity_Id := Defining_Unit_Name (Specification (Formal)); Analyzed_S : constant Entity_Id := Defining_Unit_Name (Specification (Analyzed_Formal)); Decl_Node : Node_Id; Nam : Node_Id; New_Spec : Node_Id; function From_Parent_Scope (Subp : Entity_Id) return Boolean; -- If the generic is a child unit, the parent has been installed on the -- scope stack, but a default subprogram cannot resolve to something on -- the parent because that parent is not really part of the visible -- context (it is there to resolve explicit local entities). If the -- default has resolved in this way, we remove the entity from -- immediate visibility and analyze the node again to emit an error -- message or find another visible candidate. procedure Valid_Actual_Subprogram (Act : Node_Id); -- Perform legality check and raise exception on failure ----------------------- -- From_Parent_Scope -- ----------------------- function From_Parent_Scope (Subp : Entity_Id) return Boolean is Gen_Scope : Node_Id; begin Gen_Scope := Scope (Analyzed_S); while Present (Gen_Scope) and then Is_Child_Unit (Gen_Scope) loop if Scope (Subp) = Scope (Gen_Scope) then return True; end if; Gen_Scope := Scope (Gen_Scope); end loop; return False; end From_Parent_Scope; ----------------------------- -- Valid_Actual_Subprogram -- ----------------------------- procedure Valid_Actual_Subprogram (Act : Node_Id) is Act_E : Entity_Id; begin if Is_Entity_Name (Act) then Act_E := Entity (Act); elsif Nkind (Act) = N_Selected_Component and then Is_Entity_Name (Selector_Name (Act)) then Act_E := Entity (Selector_Name (Act)); else Act_E := Empty; end if; if (Present (Act_E) and then Is_Overloadable (Act_E)) or else Nkind_In (Act, N_Attribute_Reference, N_Indexed_Component, N_Character_Literal, N_Explicit_Dereference) then return; end if; Error_Msg_NE ("expect subprogram or entry name in instantiation of&", Instantiation_Node, Formal_Sub); Abandon_Instantiation (Instantiation_Node); end Valid_Actual_Subprogram; -- Start of processing for Instantiate_Formal_Subprogram begin New_Spec := New_Copy_Tree (Specification (Formal)); -- The tree copy has created the proper instantiation sloc for the -- new specification. Use this location for all other constructed -- declarations. Loc := Sloc (Defining_Unit_Name (New_Spec)); -- Create new entity for the actual (New_Copy_Tree does not) Set_Defining_Unit_Name (New_Spec, Make_Defining_Identifier (Loc, Chars (Formal_Sub))); -- Create new entities for the each of the formals in the -- specification of the renaming declaration built for the actual. if Present (Parameter_Specifications (New_Spec)) then declare F : Node_Id; begin F := First (Parameter_Specifications (New_Spec)); while Present (F) loop Set_Defining_Identifier (F, Make_Defining_Identifier (Sloc (F), Chars => Chars (Defining_Identifier (F)))); Next (F); end loop; end; end if; -- Find entity of actual. If the actual is an attribute reference, it -- cannot be resolved here (its formal is missing) but is handled -- instead in Attribute_Renaming. If the actual is overloaded, it is -- fully resolved subsequently, when the renaming declaration for the -- formal is analyzed. If it is an explicit dereference, resolve the -- prefix but not the actual itself, to prevent interpretation as call. if Present (Actual) then Loc := Sloc (Actual); Set_Sloc (New_Spec, Loc); if Nkind (Actual) = N_Operator_Symbol then Find_Direct_Name (Actual); elsif Nkind (Actual) = N_Explicit_Dereference then Analyze (Prefix (Actual)); elsif Nkind (Actual) /= N_Attribute_Reference then Analyze (Actual); end if; Valid_Actual_Subprogram (Actual); Nam := Actual; elsif Present (Default_Name (Formal)) then if not Nkind_In (Default_Name (Formal), N_Attribute_Reference, N_Selected_Component, N_Indexed_Component, N_Character_Literal) and then Present (Entity (Default_Name (Formal))) then Nam := New_Occurrence_Of (Entity (Default_Name (Formal)), Loc); else Nam := New_Copy (Default_Name (Formal)); Set_Sloc (Nam, Loc); end if; elsif Box_Present (Formal) then -- Actual is resolved at the point of instantiation. Create an -- identifier or operator with the same name as the formal. if Nkind (Formal_Sub) = N_Defining_Operator_Symbol then Nam := Make_Operator_Symbol (Loc, Chars => Chars (Formal_Sub), Strval => No_String); else Nam := Make_Identifier (Loc, Chars (Formal_Sub)); end if; elsif Nkind (Specification (Formal)) = N_Procedure_Specification and then Null_Present (Specification (Formal)) then -- Generate null body for procedure, for use in the instance Decl_Node := Make_Subprogram_Body (Loc, Specification => New_Spec, Declarations => New_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Make_Null_Statement (Loc)))); Set_Is_Intrinsic_Subprogram (Defining_Unit_Name (New_Spec)); return Decl_Node; else Error_Msg_Sloc := Sloc (Scope (Analyzed_S)); Error_Msg_NE ("missing actual&", Instantiation_Node, Formal_Sub); Error_Msg_NE ("\in instantiation of & declared#", Instantiation_Node, Scope (Analyzed_S)); Abandon_Instantiation (Instantiation_Node); end if; Decl_Node := Make_Subprogram_Renaming_Declaration (Loc, Specification => New_Spec, Name => Nam); -- If we do not have an actual and the formal specified <> then set to -- get proper default. if No (Actual) and then Box_Present (Formal) then Set_From_Default (Decl_Node); end if; -- Gather possible interpretations for the actual before analyzing the -- instance. If overloaded, it will be resolved when analyzing the -- renaming declaration. if Box_Present (Formal) and then No (Actual) then Analyze (Nam); if Is_Child_Unit (Scope (Analyzed_S)) and then Present (Entity (Nam)) then if not Is_Overloaded (Nam) then if From_Parent_Scope (Entity (Nam)) then Set_Is_Immediately_Visible (Entity (Nam), False); Set_Entity (Nam, Empty); Set_Etype (Nam, Empty); Analyze (Nam); Set_Is_Immediately_Visible (Entity (Nam)); end if; else declare I : Interp_Index; It : Interp; begin Get_First_Interp (Nam, I, It); while Present (It.Nam) loop if From_Parent_Scope (It.Nam) then Remove_Interp (I); end if; Get_Next_Interp (I, It); end loop; end; end if; end if; end if; -- The generic instantiation freezes the actual. This can only be done -- once the actual is resolved, in the analysis of the renaming -- declaration. To make the formal subprogram entity available, we set -- Corresponding_Formal_Spec to point to the formal subprogram entity. -- This is also needed in Analyze_Subprogram_Renaming for the processing -- of formal abstract subprograms. Set_Corresponding_Formal_Spec (Decl_Node, Analyzed_S); -- We cannot analyze the renaming declaration, and thus find the actual, -- until all the actuals are assembled in the instance. For subsequent -- checks of other actuals, indicate the node that will hold the -- instance of this formal. Set_Instance_Of (Analyzed_S, Nam); if Nkind (Actual) = N_Selected_Component and then Is_Task_Type (Etype (Prefix (Actual))) and then not Is_Frozen (Etype (Prefix (Actual))) then -- The renaming declaration will create a body, which must appear -- outside of the instantiation, We move the renaming declaration -- out of the instance, and create an additional renaming inside, -- to prevent freezing anomalies. declare Anon_Id : constant Entity_Id := Make_Temporary (Loc, 'E'); begin Set_Defining_Unit_Name (New_Spec, Anon_Id); Insert_Before (Instantiation_Node, Decl_Node); Analyze (Decl_Node); -- Now create renaming within the instance Decl_Node := Make_Subprogram_Renaming_Declaration (Loc, Specification => New_Copy_Tree (New_Spec), Name => New_Occurrence_Of (Anon_Id, Loc)); Set_Defining_Unit_Name (Specification (Decl_Node), Make_Defining_Identifier (Loc, Chars (Formal_Sub))); end; end if; return Decl_Node; end Instantiate_Formal_Subprogram; ------------------------ -- Instantiate_Object -- ------------------------ function Instantiate_Object (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id) return List_Id is Gen_Obj : constant Entity_Id := Defining_Identifier (Formal); A_Gen_Obj : constant Entity_Id := Defining_Identifier (Analyzed_Formal); Acc_Def : Node_Id := Empty; Act_Assoc : constant Node_Id := Parent (Actual); Actual_Decl : Node_Id := Empty; Decl_Node : Node_Id; Def : Node_Id; Ftyp : Entity_Id; List : constant List_Id := New_List; Loc : constant Source_Ptr := Sloc (Actual); Orig_Ftyp : constant Entity_Id := Etype (A_Gen_Obj); Subt_Decl : Node_Id := Empty; Subt_Mark : Node_Id := Empty; begin if Present (Subtype_Mark (Formal)) then Subt_Mark := Subtype_Mark (Formal); else Check_Access_Definition (Formal); Acc_Def := Access_Definition (Formal); end if; -- Sloc for error message on missing actual Error_Msg_Sloc := Sloc (Scope (A_Gen_Obj)); if Get_Instance_Of (Gen_Obj) /= Gen_Obj then Error_Msg_N ("duplicate instantiation of generic parameter", Actual); end if; Set_Parent (List, Parent (Actual)); -- OUT present if Out_Present (Formal) then -- An IN OUT generic actual must be a name. The instantiation is a -- renaming declaration. The actual is the name being renamed. We -- use the actual directly, rather than a copy, because it is not -- used further in the list of actuals, and because a copy or a use -- of relocate_node is incorrect if the instance is nested within a -- generic. In order to simplify ASIS searches, the Generic_Parent -- field links the declaration to the generic association. if No (Actual) then Error_Msg_NE ("missing actual&", Instantiation_Node, Gen_Obj); Error_Msg_NE ("\in instantiation of & declared#", Instantiation_Node, Scope (A_Gen_Obj)); Abandon_Instantiation (Instantiation_Node); end if; if Present (Subt_Mark) then Decl_Node := Make_Object_Renaming_Declaration (Loc, Defining_Identifier => New_Copy (Gen_Obj), Subtype_Mark => New_Copy_Tree (Subt_Mark), Name => Actual); else pragma Assert (Present (Acc_Def)); Decl_Node := Make_Object_Renaming_Declaration (Loc, Defining_Identifier => New_Copy (Gen_Obj), Access_Definition => New_Copy_Tree (Acc_Def), Name => Actual); end if; Set_Corresponding_Generic_Association (Decl_Node, Act_Assoc); -- The analysis of the actual may produce Insert_Action nodes, so -- the declaration must have a context in which to attach them. Append (Decl_Node, List); Analyze (Actual); -- Return if the analysis of the actual reported some error if Etype (Actual) = Any_Type then return List; end if; -- This check is performed here because Analyze_Object_Renaming will -- not check it when Comes_From_Source is False. Note though that the -- check for the actual being the name of an object will be performed -- in Analyze_Object_Renaming. if Is_Object_Reference (Actual) and then Is_Dependent_Component_Of_Mutable_Object (Actual) then Error_Msg_N ("illegal discriminant-dependent component for in out parameter", Actual); end if; -- The actual has to be resolved in order to check that it is a -- variable (due to cases such as F (1), where F returns access to an -- array, and for overloaded prefixes). Ftyp := Get_Instance_Of (Etype (A_Gen_Obj)); -- If the type of the formal is not itself a formal, and the -- current unit is a child unit, the formal type must be declared -- in a parent, and must be retrieved by visibility. if Ftyp = Orig_Ftyp and then Is_Generic_Unit (Scope (Ftyp)) and then Is_Child_Unit (Scope (A_Gen_Obj)) then declare Temp : constant Node_Id := New_Copy_Tree (Subtype_Mark (Analyzed_Formal)); begin Set_Entity (Temp, Empty); Find_Type (Temp); Ftyp := Entity (Temp); end; end if; if Is_Private_Type (Ftyp) and then not Is_Private_Type (Etype (Actual)) and then (Base_Type (Full_View (Ftyp)) = Base_Type (Etype (Actual)) or else Base_Type (Etype (Actual)) = Ftyp) then -- If the actual has the type of the full view of the formal, or -- else a non-private subtype of the formal, then the visibility -- of the formal type has changed. Add to the actuals a subtype -- declaration that will force the exchange of views in the body -- of the instance as well. Subt_Decl := Make_Subtype_Declaration (Loc, Defining_Identifier => Make_Temporary (Loc, 'P'), Subtype_Indication => New_Occurrence_Of (Ftyp, Loc)); Prepend (Subt_Decl, List); Prepend_Elmt (Full_View (Ftyp), Exchanged_Views); Exchange_Declarations (Ftyp); end if; Resolve (Actual, Ftyp); if not Denotes_Variable (Actual) then Error_Msg_NE ("actual for& must be a variable", Actual, Gen_Obj); elsif Base_Type (Ftyp) /= Base_Type (Etype (Actual)) then -- Ada 2005 (AI-423): For a generic formal object of mode in out, -- the type of the actual shall resolve to a specific anonymous -- access type. if Ada_Version < Ada_2005 or else Ekind (Base_Type (Ftyp)) /= E_Anonymous_Access_Type or else Ekind (Base_Type (Etype (Actual))) /= E_Anonymous_Access_Type then Error_Msg_NE ("type of actual does not match type of&", Actual, Gen_Obj); end if; end if; Note_Possible_Modification (Actual, Sure => True); -- Check for instantiation of atomic/volatile actual for -- non-atomic/volatile formal (RM C.6 (12)). if Is_Atomic_Object (Actual) and then not Is_Atomic (Orig_Ftyp) then Error_Msg_N ("cannot instantiate non-atomic formal object " & "with atomic actual", Actual); elsif Is_Volatile_Object (Actual) and then not Is_Volatile (Orig_Ftyp) then Error_Msg_N ("cannot instantiate non-volatile formal object " & "with volatile actual", Actual); end if; -- Formal in-parameter else -- The instantiation of a generic formal in-parameter is constant -- declaration. The actual is the expression for that declaration. if Present (Actual) then if Present (Subt_Mark) then Def := Subt_Mark; else pragma Assert (Present (Acc_Def)); Def := Acc_Def; end if; Decl_Node := Make_Object_Declaration (Loc, Defining_Identifier => New_Copy (Gen_Obj), Constant_Present => True, Null_Exclusion_Present => Null_Exclusion_Present (Formal), Object_Definition => New_Copy_Tree (Def), Expression => Actual); Set_Corresponding_Generic_Association (Decl_Node, Act_Assoc); -- A generic formal object of a tagged type is defined to be -- aliased so the new constant must also be treated as aliased. if Is_Tagged_Type (Etype (A_Gen_Obj)) then Set_Aliased_Present (Decl_Node); end if; Append (Decl_Node, List); -- No need to repeat (pre-)analysis of some expression nodes -- already handled in Preanalyze_Actuals. if Nkind (Actual) /= N_Allocator then Analyze (Actual); -- Return if the analysis of the actual reported some error if Etype (Actual) = Any_Type then return List; end if; end if; declare Formal_Type : constant Entity_Id := Etype (A_Gen_Obj); Typ : Entity_Id; begin Typ := Get_Instance_Of (Formal_Type); Freeze_Before (Instantiation_Node, Typ); -- If the actual is an aggregate, perform name resolution on -- its components (the analysis of an aggregate does not do it) -- to capture local names that may be hidden if the generic is -- a child unit. if Nkind (Actual) = N_Aggregate then Preanalyze_And_Resolve (Actual, Typ); end if; if Is_Limited_Type (Typ) and then not OK_For_Limited_Init (Typ, Actual) then Error_Msg_N ("initialization not allowed for limited types", Actual); Explain_Limited_Type (Typ, Actual); end if; end; elsif Present (Default_Expression (Formal)) then -- Use default to construct declaration if Present (Subt_Mark) then Def := Subt_Mark; else pragma Assert (Present (Acc_Def)); Def := Acc_Def; end if; Decl_Node := Make_Object_Declaration (Sloc (Formal), Defining_Identifier => New_Copy (Gen_Obj), Constant_Present => True, Null_Exclusion_Present => Null_Exclusion_Present (Formal), Object_Definition => New_Copy (Def), Expression => New_Copy_Tree (Default_Expression (Formal))); Append (Decl_Node, List); Set_Analyzed (Expression (Decl_Node), False); else Error_Msg_NE ("missing actual&", Instantiation_Node, Gen_Obj); Error_Msg_NE ("\in instantiation of & declared#", Instantiation_Node, Scope (A_Gen_Obj)); if Is_Scalar_Type (Etype (A_Gen_Obj)) then -- Create dummy constant declaration so that instance can be -- analyzed, to minimize cascaded visibility errors. if Present (Subt_Mark) then Def := Subt_Mark; else pragma Assert (Present (Acc_Def)); Def := Acc_Def; end if; Decl_Node := Make_Object_Declaration (Loc, Defining_Identifier => New_Copy (Gen_Obj), Constant_Present => True, Null_Exclusion_Present => Null_Exclusion_Present (Formal), Object_Definition => New_Copy (Def), Expression => Make_Attribute_Reference (Sloc (Gen_Obj), Attribute_Name => Name_First, Prefix => New_Copy (Def))); Append (Decl_Node, List); else Abandon_Instantiation (Instantiation_Node); end if; end if; end if; if Nkind (Actual) in N_Has_Entity then Actual_Decl := Parent (Entity (Actual)); end if; -- Ada 2005 (AI-423): For a formal object declaration with a null -- exclusion or an access definition that has a null exclusion: If the -- actual matching the formal object declaration denotes a generic -- formal object of another generic unit G, and the instantiation -- containing the actual occurs within the body of G or within the body -- of a generic unit declared within the declarative region of G, then -- the declaration of the formal object of G must have a null exclusion. -- Otherwise, the subtype of the actual matching the formal object -- declaration shall exclude null. if Ada_Version >= Ada_2005 and then Present (Actual_Decl) and then Nkind_In (Actual_Decl, N_Formal_Object_Declaration, N_Object_Declaration) and then Nkind (Analyzed_Formal) = N_Formal_Object_Declaration and then not Has_Null_Exclusion (Actual_Decl) and then Has_Null_Exclusion (Analyzed_Formal) then Error_Msg_Sloc := Sloc (Analyzed_Formal); Error_Msg_N ("actual must exclude null to match generic formal#", Actual); end if; return List; end Instantiate_Object; ------------------------------ -- Instantiate_Package_Body -- ------------------------------ procedure Instantiate_Package_Body (Body_Info : Pending_Body_Info; Inlined_Body : Boolean := False; Body_Optional : Boolean := False) is Act_Decl : constant Node_Id := Body_Info.Act_Decl; Inst_Node : constant Node_Id := Body_Info.Inst_Node; Loc : constant Source_Ptr := Sloc (Inst_Node); Gen_Id : constant Node_Id := Name (Inst_Node); Gen_Unit : constant Entity_Id := Get_Generic_Entity (Inst_Node); Gen_Decl : constant Node_Id := Unit_Declaration_Node (Gen_Unit); Act_Spec : constant Node_Id := Specification (Act_Decl); Act_Decl_Id : constant Entity_Id := Defining_Entity (Act_Spec); Act_Body_Name : Node_Id; Gen_Body : Node_Id; Gen_Body_Id : Node_Id; Act_Body : Node_Id; Act_Body_Id : Entity_Id; Parent_Installed : Boolean := False; Save_Style_Check : constant Boolean := Style_Check; Par_Ent : Entity_Id := Empty; Par_Vis : Boolean := False; Vis_Prims_List : Elist_Id := No_Elist; -- List of primitives made temporarily visible in the instantiation -- to match the visibility of the formal type begin Gen_Body_Id := Corresponding_Body (Gen_Decl); -- The instance body may already have been processed, as the parent of -- another instance that is inlined (Load_Parent_Of_Generic). if Present (Corresponding_Body (Instance_Spec (Inst_Node))) then return; end if; Expander_Mode_Save_And_Set (Body_Info.Expander_Status); -- Re-establish the state of information on which checks are suppressed. -- This information was set in Body_Info at the point of instantiation, -- and now we restore it so that the instance is compiled using the -- check status at the instantiation (RM 11.5 (7.2/2), AI95-00224-01). Local_Suppress_Stack_Top := Body_Info.Local_Suppress_Stack_Top; Scope_Suppress := Body_Info.Scope_Suppress; Opt.Ada_Version := Body_Info.Version; if No (Gen_Body_Id) then Load_Parent_Of_Generic (Inst_Node, Specification (Gen_Decl), Body_Optional); Gen_Body_Id := Corresponding_Body (Gen_Decl); end if; -- Establish global variable for sloc adjustment and for error recovery Instantiation_Node := Inst_Node; if Present (Gen_Body_Id) then Save_Env (Gen_Unit, Act_Decl_Id); Style_Check := False; Current_Sem_Unit := Body_Info.Current_Sem_Unit; Gen_Body := Unit_Declaration_Node (Gen_Body_Id); Create_Instantiation_Source (Inst_Node, Gen_Body_Id, False, S_Adjustment); Act_Body := Copy_Generic_Node (Original_Node (Gen_Body), Empty, Instantiating => True); -- Build new name (possibly qualified) for body declaration Act_Body_Id := New_Copy (Act_Decl_Id); -- Some attributes of spec entity are not inherited by body entity Set_Handler_Records (Act_Body_Id, No_List); if Nkind (Defining_Unit_Name (Act_Spec)) = N_Defining_Program_Unit_Name then Act_Body_Name := Make_Defining_Program_Unit_Name (Loc, Name => New_Copy_Tree (Name (Defining_Unit_Name (Act_Spec))), Defining_Identifier => Act_Body_Id); else Act_Body_Name := Act_Body_Id; end if; Set_Defining_Unit_Name (Act_Body, Act_Body_Name); Set_Corresponding_Spec (Act_Body, Act_Decl_Id); Check_Generic_Actuals (Act_Decl_Id, False); -- Install primitives hidden at the point of the instantiation but -- visible when processing the generic formals declare E : Entity_Id; begin E := First_Entity (Act_Decl_Id); while Present (E) loop if Is_Type (E) and then Is_Generic_Actual_Type (E) and then Is_Tagged_Type (E) then Install_Hidden_Primitives (Prims_List => Vis_Prims_List, Gen_T => Generic_Parent_Type (Parent (E)), Act_T => E); end if; Next_Entity (E); end loop; end; -- If it is a child unit, make the parent instance (which is an -- instance of the parent of the generic) visible. The parent -- instance is the prefix of the name of the generic unit. if Ekind (Scope (Gen_Unit)) = E_Generic_Package and then Nkind (Gen_Id) = N_Expanded_Name then Par_Ent := Entity (Prefix (Gen_Id)); Par_Vis := Is_Immediately_Visible (Par_Ent); Install_Parent (Par_Ent, In_Body => True); Parent_Installed := True; elsif Is_Child_Unit (Gen_Unit) then Par_Ent := Scope (Gen_Unit); Par_Vis := Is_Immediately_Visible (Par_Ent); Install_Parent (Par_Ent, In_Body => True); Parent_Installed := True; end if; -- If the instantiation is a library unit, and this is the main unit, -- then build the resulting compilation unit nodes for the instance. -- If this is a compilation unit but it is not the main unit, then it -- is the body of a unit in the context, that is being compiled -- because it is encloses some inlined unit or another generic unit -- being instantiated. In that case, this body is not part of the -- current compilation, and is not attached to the tree, but its -- parent must be set for analysis. if Nkind (Parent (Inst_Node)) = N_Compilation_Unit then -- Replace instance node with body of instance, and create new -- node for corresponding instance declaration. Build_Instance_Compilation_Unit_Nodes (Inst_Node, Act_Body, Act_Decl); Analyze (Inst_Node); if Parent (Inst_Node) = Cunit (Main_Unit) then -- If the instance is a child unit itself, then set the scope -- of the expanded body to be the parent of the instantiation -- (ensuring that the fully qualified name will be generated -- for the elaboration subprogram). if Nkind (Defining_Unit_Name (Act_Spec)) = N_Defining_Program_Unit_Name then Set_Scope (Defining_Entity (Inst_Node), Scope (Act_Decl_Id)); end if; end if; -- Case where instantiation is not a library unit else -- If this is an early instantiation, i.e. appears textually -- before the corresponding body and must be elaborated first, -- indicate that the body instance is to be delayed. Install_Body (Act_Body, Inst_Node, Gen_Body, Gen_Decl); -- Now analyze the body. We turn off all checks if this is an -- internal unit, since there is no reason to have checks on for -- any predefined run-time library code. All such code is designed -- to be compiled with checks off. -- Note that we do NOT apply this criterion to children of GNAT -- (or on VMS, children of DEC). The latter units must suppress -- checks explicitly if this is needed. if Is_Predefined_File_Name (Unit_File_Name (Get_Source_Unit (Gen_Decl))) then Analyze (Act_Body, Suppress => All_Checks); else Analyze (Act_Body); end if; end if; Inherit_Context (Gen_Body, Inst_Node); -- Remove the parent instances if they have been placed on the scope -- stack to compile the body. if Parent_Installed then Remove_Parent (In_Body => True); -- Restore the previous visibility of the parent Set_Is_Immediately_Visible (Par_Ent, Par_Vis); end if; Restore_Hidden_Primitives (Vis_Prims_List); Restore_Private_Views (Act_Decl_Id); -- Remove the current unit from visibility if this is an instance -- that is not elaborated on the fly for inlining purposes. if not Inlined_Body then Set_Is_Immediately_Visible (Act_Decl_Id, False); end if; Restore_Env; Style_Check := Save_Style_Check; -- If we have no body, and the unit requires a body, then complain. This -- complaint is suppressed if we have detected other errors (since a -- common reason for missing the body is that it had errors). -- In CodePeer mode, a warning has been emitted already, no need for -- further messages. elsif Unit_Requires_Body (Gen_Unit) and then not Body_Optional then if CodePeer_Mode then null; elsif Serious_Errors_Detected = 0 then Error_Msg_NE ("cannot find body of generic package &", Inst_Node, Gen_Unit); -- Don't attempt to perform any cleanup actions if some other error -- was already detected, since this can cause blowups. else return; end if; -- Case of package that does not need a body else -- If the instantiation of the declaration is a library unit, rewrite -- the original package instantiation as a package declaration in the -- compilation unit node. if Nkind (Parent (Inst_Node)) = N_Compilation_Unit then Set_Parent_Spec (Act_Decl, Parent_Spec (Inst_Node)); Rewrite (Inst_Node, Act_Decl); -- Generate elaboration entity, in case spec has elaboration code. -- This cannot be done when the instance is analyzed, because it -- is not known yet whether the body exists. Set_Elaboration_Entity_Required (Act_Decl_Id, False); Build_Elaboration_Entity (Parent (Inst_Node), Act_Decl_Id); -- If the instantiation is not a library unit, then append the -- declaration to the list of implicitly generated entities, unless -- it is already a list member which means that it was already -- processed elsif not Is_List_Member (Act_Decl) then Mark_Rewrite_Insertion (Act_Decl); Insert_Before (Inst_Node, Act_Decl); end if; end if; Expander_Mode_Restore; end Instantiate_Package_Body; --------------------------------- -- Instantiate_Subprogram_Body -- --------------------------------- procedure Instantiate_Subprogram_Body (Body_Info : Pending_Body_Info; Body_Optional : Boolean := False) is Act_Decl : constant Node_Id := Body_Info.Act_Decl; Inst_Node : constant Node_Id := Body_Info.Inst_Node; Loc : constant Source_Ptr := Sloc (Inst_Node); Gen_Id : constant Node_Id := Name (Inst_Node); Gen_Unit : constant Entity_Id := Get_Generic_Entity (Inst_Node); Gen_Decl : constant Node_Id := Unit_Declaration_Node (Gen_Unit); Anon_Id : constant Entity_Id := Defining_Unit_Name (Specification (Act_Decl)); Pack_Id : constant Entity_Id := Defining_Unit_Name (Parent (Act_Decl)); Decls : List_Id; Gen_Body : Node_Id; Gen_Body_Id : Node_Id; Act_Body : Node_Id; Pack_Body : Node_Id; Prev_Formal : Entity_Id; Ret_Expr : Node_Id; Unit_Renaming : Node_Id; Parent_Installed : Boolean := False; Save_Style_Check : constant Boolean := Style_Check; Par_Ent : Entity_Id := Empty; Par_Vis : Boolean := False; begin Gen_Body_Id := Corresponding_Body (Gen_Decl); -- Subprogram body may have been created already because of an inline -- pragma, or because of multiple elaborations of the enclosing package -- when several instances of the subprogram appear in the main unit. if Present (Corresponding_Body (Act_Decl)) then return; end if; Expander_Mode_Save_And_Set (Body_Info.Expander_Status); -- Re-establish the state of information on which checks are suppressed. -- This information was set in Body_Info at the point of instantiation, -- and now we restore it so that the instance is compiled using the -- check status at the instantiation (RM 11.5 (7.2/2), AI95-00224-01). Local_Suppress_Stack_Top := Body_Info.Local_Suppress_Stack_Top; Scope_Suppress := Body_Info.Scope_Suppress; Opt.Ada_Version := Body_Info.Version; if No (Gen_Body_Id) then -- For imported generic subprogram, no body to compile, complete -- the spec entity appropriately. if Is_Imported (Gen_Unit) then Set_Is_Imported (Anon_Id); Set_First_Rep_Item (Anon_Id, First_Rep_Item (Gen_Unit)); Set_Interface_Name (Anon_Id, Interface_Name (Gen_Unit)); Set_Convention (Anon_Id, Convention (Gen_Unit)); Set_Has_Completion (Anon_Id); return; -- For other cases, compile the body else Load_Parent_Of_Generic (Inst_Node, Specification (Gen_Decl), Body_Optional); Gen_Body_Id := Corresponding_Body (Gen_Decl); end if; end if; Instantiation_Node := Inst_Node; if Present (Gen_Body_Id) then Gen_Body := Unit_Declaration_Node (Gen_Body_Id); if Nkind (Gen_Body) = N_Subprogram_Body_Stub then -- Either body is not present, or context is non-expanding, as -- when compiling a subunit. Mark the instance as completed, and -- diagnose a missing body when needed. if Expander_Active and then Operating_Mode = Generate_Code then Error_Msg_N ("missing proper body for instantiation", Gen_Body); end if; Set_Has_Completion (Anon_Id); return; end if; Save_Env (Gen_Unit, Anon_Id); Style_Check := False; Current_Sem_Unit := Body_Info.Current_Sem_Unit; Create_Instantiation_Source (Inst_Node, Gen_Body_Id, False, S_Adjustment); Act_Body := Copy_Generic_Node (Original_Node (Gen_Body), Empty, Instantiating => True); -- Create proper defining name for the body, to correspond to -- the one in the spec. Set_Defining_Unit_Name (Specification (Act_Body), Make_Defining_Identifier (Sloc (Defining_Entity (Inst_Node)), Chars (Anon_Id))); Set_Corresponding_Spec (Act_Body, Anon_Id); Set_Has_Completion (Anon_Id); Check_Generic_Actuals (Pack_Id, False); -- Generate a reference to link the visible subprogram instance to -- the generic body, which for navigation purposes is the only -- available source for the instance. Generate_Reference (Related_Instance (Pack_Id), Gen_Body_Id, 'b', Set_Ref => False, Force => True); -- If it is a child unit, make the parent instance (which is an -- instance of the parent of the generic) visible. The parent -- instance is the prefix of the name of the generic unit. if Ekind (Scope (Gen_Unit)) = E_Generic_Package and then Nkind (Gen_Id) = N_Expanded_Name then Par_Ent := Entity (Prefix (Gen_Id)); Par_Vis := Is_Immediately_Visible (Par_Ent); Install_Parent (Par_Ent, In_Body => True); Parent_Installed := True; elsif Is_Child_Unit (Gen_Unit) then Par_Ent := Scope (Gen_Unit); Par_Vis := Is_Immediately_Visible (Par_Ent); Install_Parent (Par_Ent, In_Body => True); Parent_Installed := True; end if; -- Inside its body, a reference to the generic unit is a reference -- to the instance. The corresponding renaming is the first -- declaration in the body. Unit_Renaming := Make_Subprogram_Renaming_Declaration (Loc, Specification => Copy_Generic_Node ( Specification (Original_Node (Gen_Body)), Empty, Instantiating => True), Name => New_Occurrence_Of (Anon_Id, Loc)); -- If there is a formal subprogram with the same name as the unit -- itself, do not add this renaming declaration. This is a temporary -- fix for one ACVC test. ??? Prev_Formal := First_Entity (Pack_Id); while Present (Prev_Formal) loop if Chars (Prev_Formal) = Chars (Gen_Unit) and then Is_Overloadable (Prev_Formal) then exit; end if; Next_Entity (Prev_Formal); end loop; if Present (Prev_Formal) then Decls := New_List (Act_Body); else Decls := New_List (Unit_Renaming, Act_Body); end if; -- The subprogram body is placed in the body of a dummy package body, -- whose spec contains the subprogram declaration as well as the -- renaming declarations for the generic parameters. Pack_Body := Make_Package_Body (Loc, Defining_Unit_Name => New_Copy (Pack_Id), Declarations => Decls); Set_Corresponding_Spec (Pack_Body, Pack_Id); -- If the instantiation is a library unit, then build resulting -- compilation unit nodes for the instance. The declaration of -- the enclosing package is the grandparent of the subprogram -- declaration. First replace the instantiation node as the unit -- of the corresponding compilation. if Nkind (Parent (Inst_Node)) = N_Compilation_Unit then if Parent (Inst_Node) = Cunit (Main_Unit) then Set_Unit (Parent (Inst_Node), Inst_Node); Build_Instance_Compilation_Unit_Nodes (Inst_Node, Pack_Body, Parent (Parent (Act_Decl))); Analyze (Inst_Node); else Set_Parent (Pack_Body, Parent (Inst_Node)); Analyze (Pack_Body); end if; else Insert_Before (Inst_Node, Pack_Body); Mark_Rewrite_Insertion (Pack_Body); Analyze (Pack_Body); if Expander_Active then Freeze_Subprogram_Body (Inst_Node, Gen_Body, Pack_Id); end if; end if; Inherit_Context (Gen_Body, Inst_Node); Restore_Private_Views (Pack_Id, False); if Parent_Installed then Remove_Parent (In_Body => True); -- Restore the previous visibility of the parent Set_Is_Immediately_Visible (Par_Ent, Par_Vis); end if; Restore_Env; Style_Check := Save_Style_Check; -- Body not found. Error was emitted already. If there were no previous -- errors, this may be an instance whose scope is a premature instance. -- In that case we must insure that the (legal) program does raise -- program error if executed. We generate a subprogram body for this -- purpose. See DEC ac30vso. -- Should not reference proprietary DEC tests in comments ??? elsif Serious_Errors_Detected = 0 and then Nkind (Parent (Inst_Node)) /= N_Compilation_Unit then if Body_Optional then return; elsif Ekind (Anon_Id) = E_Procedure then Act_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Make_Defining_Identifier (Loc, Chars (Anon_Id)), Parameter_Specifications => New_Copy_List (Parameter_Specifications (Parent (Anon_Id)))), Declarations => Empty_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List ( Make_Raise_Program_Error (Loc, Reason => PE_Access_Before_Elaboration)))); else Ret_Expr := Make_Raise_Program_Error (Loc, Reason => PE_Access_Before_Elaboration); Set_Etype (Ret_Expr, (Etype (Anon_Id))); Set_Analyzed (Ret_Expr); Act_Body := Make_Subprogram_Body (Loc, Specification => Make_Function_Specification (Loc, Defining_Unit_Name => Make_Defining_Identifier (Loc, Chars (Anon_Id)), Parameter_Specifications => New_Copy_List (Parameter_Specifications (Parent (Anon_Id))), Result_Definition => New_Occurrence_Of (Etype (Anon_Id), Loc)), Declarations => Empty_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Make_Simple_Return_Statement (Loc, Ret_Expr)))); end if; Pack_Body := Make_Package_Body (Loc, Defining_Unit_Name => New_Copy (Pack_Id), Declarations => New_List (Act_Body)); Insert_After (Inst_Node, Pack_Body); Set_Corresponding_Spec (Pack_Body, Pack_Id); Analyze (Pack_Body); end if; Expander_Mode_Restore; end Instantiate_Subprogram_Body; ---------------------- -- Instantiate_Type -- ---------------------- function Instantiate_Type (Formal : Node_Id; Actual : Node_Id; Analyzed_Formal : Node_Id; Actual_Decls : List_Id) return List_Id is Gen_T : constant Entity_Id := Defining_Identifier (Formal); A_Gen_T : constant Entity_Id := Defining_Identifier (Analyzed_Formal); Ancestor : Entity_Id := Empty; Def : constant Node_Id := Formal_Type_Definition (Formal); Act_T : Entity_Id; Decl_Node : Node_Id; Decl_Nodes : List_Id; Loc : Source_Ptr; Subt : Entity_Id; procedure Validate_Array_Type_Instance; procedure Validate_Access_Subprogram_Instance; procedure Validate_Access_Type_Instance; procedure Validate_Derived_Type_Instance; procedure Validate_Derived_Interface_Type_Instance; procedure Validate_Discriminated_Formal_Type; procedure Validate_Interface_Type_Instance; procedure Validate_Private_Type_Instance; procedure Validate_Incomplete_Type_Instance; -- These procedures perform validation tests for the named case. -- Validate_Discriminated_Formal_Type is shared by formal private -- types and Ada 2012 formal incomplete types. function Subtypes_Match (Gen_T, Act_T : Entity_Id) return Boolean; -- Check that base types are the same and that the subtypes match -- statically. Used in several of the above. -------------------- -- Subtypes_Match -- -------------------- function Subtypes_Match (Gen_T, Act_T : Entity_Id) return Boolean is T : constant Entity_Id := Get_Instance_Of (Gen_T); begin return (Base_Type (T) = Base_Type (Act_T) and then Subtypes_Statically_Match (T, Act_T)) or else (Is_Class_Wide_Type (Gen_T) and then Is_Class_Wide_Type (Act_T) and then Subtypes_Match (Get_Instance_Of (Root_Type (Gen_T)), Root_Type (Act_T))) or else ((Ekind (Gen_T) = E_Anonymous_Access_Subprogram_Type or else Ekind (Gen_T) = E_Anonymous_Access_Type) and then Ekind (Act_T) = Ekind (Gen_T) and then Subtypes_Statically_Match (Designated_Type (Gen_T), Designated_Type (Act_T))); end Subtypes_Match; ----------------------------------------- -- Validate_Access_Subprogram_Instance -- ----------------------------------------- procedure Validate_Access_Subprogram_Instance is begin if not Is_Access_Type (Act_T) or else Ekind (Designated_Type (Act_T)) /= E_Subprogram_Type then Error_Msg_NE ("expect access type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; Check_Mode_Conformant (Designated_Type (Act_T), Designated_Type (A_Gen_T), Actual, Get_Inst => True); if Ekind (Base_Type (Act_T)) = E_Access_Protected_Subprogram_Type then if Ekind (A_Gen_T) = E_Access_Subprogram_Type then Error_Msg_NE ("protected access type not allowed for formal &", Actual, Gen_T); end if; elsif Ekind (A_Gen_T) = E_Access_Protected_Subprogram_Type then Error_Msg_NE ("expect protected access type for formal &", Actual, Gen_T); end if; end Validate_Access_Subprogram_Instance; ----------------------------------- -- Validate_Access_Type_Instance -- ----------------------------------- procedure Validate_Access_Type_Instance is Desig_Type : constant Entity_Id := Find_Actual_Type (Designated_Type (A_Gen_T), A_Gen_T); Desig_Act : Entity_Id; begin if not Is_Access_Type (Act_T) then Error_Msg_NE ("expect access type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; if Is_Access_Constant (A_Gen_T) then if not Is_Access_Constant (Act_T) then Error_Msg_N ("actual type must be access-to-constant type", Actual); Abandon_Instantiation (Actual); end if; else if Is_Access_Constant (Act_T) then Error_Msg_N ("actual type must be access-to-variable type", Actual); Abandon_Instantiation (Actual); elsif Ekind (A_Gen_T) = E_General_Access_Type and then Ekind (Base_Type (Act_T)) /= E_General_Access_Type then Error_Msg_N -- CODEFIX ("actual must be general access type!", Actual); Error_Msg_NE -- CODEFIX ("add ALL to }!", Actual, Act_T); Abandon_Instantiation (Actual); end if; end if; -- The designated subtypes, that is to say the subtypes introduced -- by an access type declaration (and not by a subtype declaration) -- must match. Desig_Act := Designated_Type (Base_Type (Act_T)); -- The designated type may have been introduced through a limited_ -- with clause, in which case retrieve the non-limited view. This -- applies to incomplete types as well as to class-wide types. if From_With_Type (Desig_Act) then Desig_Act := Available_View (Desig_Act); end if; if not Subtypes_Match (Desig_Type, Desig_Act) then Error_Msg_NE ("designated type of actual does not match that of formal &", Actual, Gen_T); Abandon_Instantiation (Actual); elsif Is_Access_Type (Designated_Type (Act_T)) and then Is_Constrained (Designated_Type (Designated_Type (Act_T))) /= Is_Constrained (Designated_Type (Desig_Type)) then Error_Msg_NE ("designated type of actual does not match that of formal &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; -- Ada 2005: null-exclusion indicators of the two types must agree if Can_Never_Be_Null (A_Gen_T) /= Can_Never_Be_Null (Act_T) then Error_Msg_NE ("non null exclusion of actual and formal & do not match", Actual, Gen_T); end if; end Validate_Access_Type_Instance; ---------------------------------- -- Validate_Array_Type_Instance -- ---------------------------------- procedure Validate_Array_Type_Instance is I1 : Node_Id; I2 : Node_Id; T2 : Entity_Id; function Formal_Dimensions return Int; -- Count number of dimensions in array type formal ----------------------- -- Formal_Dimensions -- ----------------------- function Formal_Dimensions return Int is Num : Int := 0; Index : Node_Id; begin if Nkind (Def) = N_Constrained_Array_Definition then Index := First (Discrete_Subtype_Definitions (Def)); else Index := First (Subtype_Marks (Def)); end if; while Present (Index) loop Num := Num + 1; Next_Index (Index); end loop; return Num; end Formal_Dimensions; -- Start of processing for Validate_Array_Type_Instance begin if not Is_Array_Type (Act_T) then Error_Msg_NE ("expect array type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); elsif Nkind (Def) = N_Constrained_Array_Definition then if not (Is_Constrained (Act_T)) then Error_Msg_NE ("expect constrained array in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; else if Is_Constrained (Act_T) then Error_Msg_NE ("expect unconstrained array in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; end if; if Formal_Dimensions /= Number_Dimensions (Act_T) then Error_Msg_NE ("dimensions of actual do not match formal &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; I1 := First_Index (A_Gen_T); I2 := First_Index (Act_T); for J in 1 .. Formal_Dimensions loop -- If the indexes of the actual were given by a subtype_mark, -- the index was transformed into a range attribute. Retrieve -- the original type mark for checking. if Is_Entity_Name (Original_Node (I2)) then T2 := Entity (Original_Node (I2)); else T2 := Etype (I2); end if; if not Subtypes_Match (Find_Actual_Type (Etype (I1), A_Gen_T), T2) then Error_Msg_NE ("index types of actual do not match those of formal &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; Next_Index (I1); Next_Index (I2); end loop; -- Check matching subtypes. Note that there are complex visibility -- issues when the generic is a child unit and some aspect of the -- generic type is declared in a parent unit of the generic. We do -- the test to handle this special case only after a direct check -- for static matching has failed. if Subtypes_Match (Component_Type (A_Gen_T), Component_Type (Act_T)) or else Subtypes_Match (Find_Actual_Type (Component_Type (A_Gen_T), A_Gen_T), Component_Type (Act_T)) then null; else Error_Msg_NE ("component subtype of actual does not match that of formal &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; if Has_Aliased_Components (A_Gen_T) and then not Has_Aliased_Components (Act_T) then Error_Msg_NE ("actual must have aliased components to match formal type &", Actual, Gen_T); end if; end Validate_Array_Type_Instance; ----------------------------------------------- -- Validate_Derived_Interface_Type_Instance -- ----------------------------------------------- procedure Validate_Derived_Interface_Type_Instance is Par : constant Entity_Id := Entity (Subtype_Indication (Def)); Elmt : Elmt_Id; begin -- First apply interface instance checks Validate_Interface_Type_Instance; -- Verify that immediate parent interface is an ancestor of -- the actual. if Present (Par) and then not Interface_Present_In_Ancestor (Act_T, Par) then Error_Msg_NE ("interface actual must include progenitor&", Actual, Par); end if; -- Now verify that the actual includes all other ancestors of -- the formal. Elmt := First_Elmt (Interfaces (A_Gen_T)); while Present (Elmt) loop if not Interface_Present_In_Ancestor (Act_T, Get_Instance_Of (Node (Elmt))) then Error_Msg_NE ("interface actual must include progenitor&", Actual, Node (Elmt)); end if; Next_Elmt (Elmt); end loop; end Validate_Derived_Interface_Type_Instance; ------------------------------------ -- Validate_Derived_Type_Instance -- ------------------------------------ procedure Validate_Derived_Type_Instance is Actual_Discr : Entity_Id; Ancestor_Discr : Entity_Id; begin -- If the parent type in the generic declaration is itself a previous -- formal type, then it is local to the generic and absent from the -- analyzed generic definition. In that case the ancestor is the -- instance of the formal (which must have been instantiated -- previously), unless the ancestor is itself a formal derived type. -- In this latter case (which is the subject of Corrigendum 8652/0038 -- (AI-202) the ancestor of the formals is the ancestor of its -- parent. Otherwise, the analyzed generic carries the parent type. -- If the parent type is defined in a previous formal package, then -- the scope of that formal package is that of the generic type -- itself, and it has already been mapped into the corresponding type -- in the actual package. -- Common case: parent type defined outside of the generic if Is_Entity_Name (Subtype_Mark (Def)) and then Present (Entity (Subtype_Mark (Def))) then Ancestor := Get_Instance_Of (Entity (Subtype_Mark (Def))); -- Check whether parent is defined in a previous formal package elsif Scope (Scope (Base_Type (Etype (A_Gen_T)))) = Scope (A_Gen_T) then Ancestor := Get_Instance_Of (Base_Type (Etype (A_Gen_T))); -- The type may be a local derivation, or a type extension of a -- previous formal, or of a formal of a parent package. elsif Is_Derived_Type (Get_Instance_Of (A_Gen_T)) or else Ekind (Get_Instance_Of (A_Gen_T)) = E_Record_Type_With_Private then -- Check whether the parent is another derived formal type in the -- same generic unit. if Etype (A_Gen_T) /= A_Gen_T and then Is_Generic_Type (Etype (A_Gen_T)) and then Scope (Etype (A_Gen_T)) = Scope (A_Gen_T) and then Etype (Etype (A_Gen_T)) /= Etype (A_Gen_T) then -- Locate ancestor of parent from the subtype declaration -- created for the actual. declare Decl : Node_Id; begin Decl := First (Actual_Decls); while Present (Decl) loop if Nkind (Decl) = N_Subtype_Declaration and then Chars (Defining_Identifier (Decl)) = Chars (Etype (A_Gen_T)) then Ancestor := Generic_Parent_Type (Decl); exit; else Next (Decl); end if; end loop; end; pragma Assert (Present (Ancestor)); else Ancestor := Get_Instance_Of (Base_Type (Get_Instance_Of (A_Gen_T))); end if; else Ancestor := Get_Instance_Of (Etype (Base_Type (A_Gen_T))); end if; -- If the formal derived type has pragma Preelaborable_Initialization -- then the actual type must have preelaborable initialization. if Known_To_Have_Preelab_Init (A_Gen_T) and then not Has_Preelaborable_Initialization (Act_T) then Error_Msg_NE ("actual for & must have preelaborable initialization", Actual, Gen_T); end if; -- Ada 2005 (AI-251) if Ada_Version >= Ada_2005 and then Is_Interface (Ancestor) then if not Interface_Present_In_Ancestor (Act_T, Ancestor) then Error_Msg_NE ("(Ada 2005) expected type implementing & in instantiation", Actual, Ancestor); end if; elsif not Is_Ancestor (Base_Type (Ancestor), Act_T) then Error_Msg_NE ("expect type derived from & in instantiation", Actual, First_Subtype (Ancestor)); Abandon_Instantiation (Actual); end if; -- Ada 2005 (AI-443): Synchronized formal derived type checks. Note -- that the formal type declaration has been rewritten as a private -- extension. if Ada_Version >= Ada_2005 and then Nkind (Parent (A_Gen_T)) = N_Private_Extension_Declaration and then Synchronized_Present (Parent (A_Gen_T)) then -- The actual must be a synchronized tagged type if not Is_Tagged_Type (Act_T) then Error_Msg_N ("actual of synchronized type must be tagged", Actual); Abandon_Instantiation (Actual); elsif Nkind (Parent (Act_T)) = N_Full_Type_Declaration and then Nkind (Type_Definition (Parent (Act_T))) = N_Derived_Type_Definition and then not Synchronized_Present (Type_Definition (Parent (Act_T))) then Error_Msg_N ("actual of synchronized type must be synchronized", Actual); Abandon_Instantiation (Actual); end if; end if; -- Perform atomic/volatile checks (RM C.6(12)). Note that AI05-0218-1 -- removes the second instance of the phrase "or allow pass by copy". if Is_Atomic (Act_T) and then not Is_Atomic (Ancestor) then Error_Msg_N ("cannot have atomic actual type for non-atomic formal type", Actual); elsif Is_Volatile (Act_T) and then not Is_Volatile (Ancestor) then Error_Msg_N ("cannot have volatile actual type for non-volatile formal type", Actual); end if; -- It should not be necessary to check for unknown discriminants on -- Formal, but for some reason Has_Unknown_Discriminants is false for -- A_Gen_T, so Is_Indefinite_Subtype incorrectly returns False. This -- needs fixing. ??? if not Is_Indefinite_Subtype (A_Gen_T) and then not Unknown_Discriminants_Present (Formal) and then Is_Indefinite_Subtype (Act_T) then Error_Msg_N ("actual subtype must be constrained", Actual); Abandon_Instantiation (Actual); end if; if not Unknown_Discriminants_Present (Formal) then if Is_Constrained (Ancestor) then if not Is_Constrained (Act_T) then Error_Msg_N ("actual subtype must be constrained", Actual); Abandon_Instantiation (Actual); end if; -- Ancestor is unconstrained, Check if generic formal and actual -- agree on constrainedness. The check only applies to array types -- and discriminated types. elsif Is_Constrained (Act_T) then if Ekind (Ancestor) = E_Access_Type or else (not Is_Constrained (A_Gen_T) and then Is_Composite_Type (A_Gen_T)) then Error_Msg_N ("actual subtype must be unconstrained", Actual); Abandon_Instantiation (Actual); end if; -- A class-wide type is only allowed if the formal has unknown -- discriminants. elsif Is_Class_Wide_Type (Act_T) and then not Has_Unknown_Discriminants (Ancestor) then Error_Msg_NE ("actual for & cannot be a class-wide type", Actual, Gen_T); Abandon_Instantiation (Actual); -- Otherwise, the formal and actual shall have the same number -- of discriminants and each discriminant of the actual must -- correspond to a discriminant of the formal. elsif Has_Discriminants (Act_T) and then not Has_Unknown_Discriminants (Act_T) and then Has_Discriminants (Ancestor) then Actual_Discr := First_Discriminant (Act_T); Ancestor_Discr := First_Discriminant (Ancestor); while Present (Actual_Discr) and then Present (Ancestor_Discr) loop if Base_Type (Act_T) /= Base_Type (Ancestor) and then No (Corresponding_Discriminant (Actual_Discr)) then Error_Msg_NE ("discriminant & does not correspond " & "to ancestor discriminant", Actual, Actual_Discr); Abandon_Instantiation (Actual); end if; Next_Discriminant (Actual_Discr); Next_Discriminant (Ancestor_Discr); end loop; if Present (Actual_Discr) or else Present (Ancestor_Discr) then Error_Msg_NE ("actual for & must have same number of discriminants", Actual, Gen_T); Abandon_Instantiation (Actual); end if; -- This case should be caught by the earlier check for -- constrainedness, but the check here is added for completeness. elsif Has_Discriminants (Act_T) and then not Has_Unknown_Discriminants (Act_T) then Error_Msg_NE ("actual for & must not have discriminants", Actual, Gen_T); Abandon_Instantiation (Actual); elsif Has_Discriminants (Ancestor) then Error_Msg_NE ("actual for & must have known discriminants", Actual, Gen_T); Abandon_Instantiation (Actual); end if; if not Subtypes_Statically_Compatible (Act_T, Ancestor) then Error_Msg_N ("constraint on actual is incompatible with formal", Actual); Abandon_Instantiation (Actual); end if; end if; -- If the formal and actual types are abstract, check that there -- are no abstract primitives of the actual type that correspond to -- nonabstract primitives of the formal type (second sentence of -- RM95-3.9.3(9)). if Is_Abstract_Type (A_Gen_T) and then Is_Abstract_Type (Act_T) then Check_Abstract_Primitives : declare Gen_Prims : constant Elist_Id := Primitive_Operations (A_Gen_T); Gen_Elmt : Elmt_Id; Gen_Subp : Entity_Id; Anc_Subp : Entity_Id; Anc_Formal : Entity_Id; Anc_F_Type : Entity_Id; Act_Prims : constant Elist_Id := Primitive_Operations (Act_T); Act_Elmt : Elmt_Id; Act_Subp : Entity_Id; Act_Formal : Entity_Id; Act_F_Type : Entity_Id; Subprograms_Correspond : Boolean; function Is_Tagged_Ancestor (T1, T2 : Entity_Id) return Boolean; -- Returns true if T2 is derived directly or indirectly from -- T1, including derivations from interfaces. T1 and T2 are -- required to be specific tagged base types. ------------------------ -- Is_Tagged_Ancestor -- ------------------------ function Is_Tagged_Ancestor (T1, T2 : Entity_Id) return Boolean is Intfc_Elmt : Elmt_Id; begin -- The predicate is satisfied if the types are the same if T1 = T2 then return True; -- If we've reached the top of the derivation chain then -- we know that T1 is not an ancestor of T2. elsif Etype (T2) = T2 then return False; -- Proceed to check T2's immediate parent elsif Is_Ancestor (T1, Base_Type (Etype (T2))) then return True; -- Finally, check to see if T1 is an ancestor of any of T2's -- progenitors. else Intfc_Elmt := First_Elmt (Interfaces (T2)); while Present (Intfc_Elmt) loop if Is_Ancestor (T1, Node (Intfc_Elmt)) then return True; end if; Next_Elmt (Intfc_Elmt); end loop; end if; return False; end Is_Tagged_Ancestor; -- Start of processing for Check_Abstract_Primitives begin -- Loop over all of the formal derived type's primitives Gen_Elmt := First_Elmt (Gen_Prims); while Present (Gen_Elmt) loop Gen_Subp := Node (Gen_Elmt); -- If the primitive of the formal is not abstract, then -- determine whether there is a corresponding primitive of -- the actual type that's abstract. if not Is_Abstract_Subprogram (Gen_Subp) then Act_Elmt := First_Elmt (Act_Prims); while Present (Act_Elmt) loop Act_Subp := Node (Act_Elmt); -- If we find an abstract primitive of the actual, -- then we need to test whether it corresponds to the -- subprogram from which the generic formal primitive -- is inherited. if Is_Abstract_Subprogram (Act_Subp) then Anc_Subp := Alias (Gen_Subp); -- Test whether we have a corresponding primitive -- by comparing names, kinds, formal types, and -- result types. if Chars (Anc_Subp) = Chars (Act_Subp) and then Ekind (Anc_Subp) = Ekind (Act_Subp) then Anc_Formal := First_Formal (Anc_Subp); Act_Formal := First_Formal (Act_Subp); while Present (Anc_Formal) and then Present (Act_Formal) loop Anc_F_Type := Etype (Anc_Formal); Act_F_Type := Etype (Act_Formal); if Ekind (Anc_F_Type) = E_Anonymous_Access_Type then Anc_F_Type := Designated_Type (Anc_F_Type); if Ekind (Act_F_Type) = E_Anonymous_Access_Type then Act_F_Type := Designated_Type (Act_F_Type); else exit; end if; elsif Ekind (Act_F_Type) = E_Anonymous_Access_Type then exit; end if; Anc_F_Type := Base_Type (Anc_F_Type); Act_F_Type := Base_Type (Act_F_Type); -- If the formal is controlling, then the -- the type of the actual primitive's formal -- must be derived directly or indirectly -- from the type of the ancestor primitive's -- formal. if Is_Controlling_Formal (Anc_Formal) then if not Is_Tagged_Ancestor (Anc_F_Type, Act_F_Type) then exit; end if; -- Otherwise the types of the formals must -- be the same. elsif Anc_F_Type /= Act_F_Type then exit; end if; Next_Entity (Anc_Formal); Next_Entity (Act_Formal); end loop; -- If we traversed through all of the formals -- then so far the subprograms correspond, so -- now check that any result types correspond. if No (Anc_Formal) and then No (Act_Formal) then Subprograms_Correspond := True; if Ekind (Act_Subp) = E_Function then Anc_F_Type := Etype (Anc_Subp); Act_F_Type := Etype (Act_Subp); if Ekind (Anc_F_Type) = E_Anonymous_Access_Type then Anc_F_Type := Designated_Type (Anc_F_Type); if Ekind (Act_F_Type) = E_Anonymous_Access_Type then Act_F_Type := Designated_Type (Act_F_Type); else Subprograms_Correspond := False; end if; elsif Ekind (Act_F_Type) = E_Anonymous_Access_Type then Subprograms_Correspond := False; end if; Anc_F_Type := Base_Type (Anc_F_Type); Act_F_Type := Base_Type (Act_F_Type); -- Now either the result types must be -- the same or, if the result type is -- controlling, the result type of the -- actual primitive must descend from the -- result type of the ancestor primitive. if Subprograms_Correspond and then Anc_F_Type /= Act_F_Type and then Has_Controlling_Result (Anc_Subp) and then not Is_Tagged_Ancestor (Anc_F_Type, Act_F_Type) then Subprograms_Correspond := False; end if; end if; -- Found a matching subprogram belonging to -- formal ancestor type, so actual subprogram -- corresponds and this violates 3.9.3(9). if Subprograms_Correspond then Error_Msg_NE ("abstract subprogram & overrides " & "nonabstract subprogram of ancestor", Actual, Act_Subp); end if; end if; end if; end if; Next_Elmt (Act_Elmt); end loop; end if; Next_Elmt (Gen_Elmt); end loop; end Check_Abstract_Primitives; end if; -- Verify that limitedness matches. If parent is a limited -- interface then the generic formal is not unless declared -- explicitly so. If not declared limited, the actual cannot be -- limited (see AI05-0087). -- Even though this AI is a binding interpretation, we enable the -- check only in Ada 2012 mode, because this improper construct -- shows up in user code and in existing B-tests. if Is_Limited_Type (Act_T) and then not Is_Limited_Type (A_Gen_T) and then Ada_Version >= Ada_2012 then if In_Instance then null; else Error_Msg_NE ("actual for non-limited & cannot be a limited type", Actual, Gen_T); Explain_Limited_Type (Act_T, Actual); Abandon_Instantiation (Actual); end if; end if; end Validate_Derived_Type_Instance; ---------------------------------------- -- Validate_Discriminated_Formal_Type -- ---------------------------------------- procedure Validate_Discriminated_Formal_Type is Formal_Discr : Entity_Id; Actual_Discr : Entity_Id; Formal_Subt : Entity_Id; begin if Has_Discriminants (A_Gen_T) then if not Has_Discriminants (Act_T) then Error_Msg_NE ("actual for & must have discriminants", Actual, Gen_T); Abandon_Instantiation (Actual); elsif Is_Constrained (Act_T) then Error_Msg_NE ("actual for & must be unconstrained", Actual, Gen_T); Abandon_Instantiation (Actual); else Formal_Discr := First_Discriminant (A_Gen_T); Actual_Discr := First_Discriminant (Act_T); while Formal_Discr /= Empty loop if Actual_Discr = Empty then Error_Msg_NE ("discriminants on actual do not match formal", Actual, Gen_T); Abandon_Instantiation (Actual); end if; Formal_Subt := Get_Instance_Of (Etype (Formal_Discr)); -- Access discriminants match if designated types do if Ekind (Base_Type (Formal_Subt)) = E_Anonymous_Access_Type and then (Ekind (Base_Type (Etype (Actual_Discr)))) = E_Anonymous_Access_Type and then Get_Instance_Of (Designated_Type (Base_Type (Formal_Subt))) = Designated_Type (Base_Type (Etype (Actual_Discr))) then null; elsif Base_Type (Formal_Subt) /= Base_Type (Etype (Actual_Discr)) then Error_Msg_NE ("types of actual discriminants must match formal", Actual, Gen_T); Abandon_Instantiation (Actual); elsif not Subtypes_Statically_Match (Formal_Subt, Etype (Actual_Discr)) and then Ada_Version >= Ada_95 then Error_Msg_NE ("subtypes of actual discriminants must match formal", Actual, Gen_T); Abandon_Instantiation (Actual); end if; Next_Discriminant (Formal_Discr); Next_Discriminant (Actual_Discr); end loop; if Actual_Discr /= Empty then Error_Msg_NE ("discriminants on actual do not match formal", Actual, Gen_T); Abandon_Instantiation (Actual); end if; end if; end if; end Validate_Discriminated_Formal_Type; --------------------------------------- -- Validate_Incomplete_Type_Instance -- --------------------------------------- procedure Validate_Incomplete_Type_Instance is begin if not Is_Tagged_Type (Act_T) and then Is_Tagged_Type (A_Gen_T) then Error_Msg_NE ("actual for & must be a tagged type", Actual, Gen_T); end if; Validate_Discriminated_Formal_Type; end Validate_Incomplete_Type_Instance; -------------------------------------- -- Validate_Interface_Type_Instance -- -------------------------------------- procedure Validate_Interface_Type_Instance is begin if not Is_Interface (Act_T) then Error_Msg_NE ("actual for formal interface type must be an interface", Actual, Gen_T); elsif Is_Limited_Type (Act_T) /= Is_Limited_Type (A_Gen_T) or else Is_Task_Interface (A_Gen_T) /= Is_Task_Interface (Act_T) or else Is_Protected_Interface (A_Gen_T) /= Is_Protected_Interface (Act_T) or else Is_Synchronized_Interface (A_Gen_T) /= Is_Synchronized_Interface (Act_T) then Error_Msg_NE ("actual for interface& does not match (RM 12.5.5(4))", Actual, Gen_T); end if; end Validate_Interface_Type_Instance; ------------------------------------ -- Validate_Private_Type_Instance -- ------------------------------------ procedure Validate_Private_Type_Instance is begin if Is_Limited_Type (Act_T) and then not Is_Limited_Type (A_Gen_T) then if In_Instance then null; else Error_Msg_NE ("actual for non-limited & cannot be a limited type", Actual, Gen_T); Explain_Limited_Type (Act_T, Actual); Abandon_Instantiation (Actual); end if; elsif Known_To_Have_Preelab_Init (A_Gen_T) and then not Has_Preelaborable_Initialization (Act_T) then Error_Msg_NE ("actual for & must have preelaborable initialization", Actual, Gen_T); elsif Is_Indefinite_Subtype (Act_T) and then not Is_Indefinite_Subtype (A_Gen_T) and then Ada_Version >= Ada_95 then Error_Msg_NE ("actual for & must be a definite subtype", Actual, Gen_T); elsif not Is_Tagged_Type (Act_T) and then Is_Tagged_Type (A_Gen_T) then Error_Msg_NE ("actual for & must be a tagged type", Actual, Gen_T); end if; Validate_Discriminated_Formal_Type; Ancestor := Gen_T; end Validate_Private_Type_Instance; -- Start of processing for Instantiate_Type begin if Get_Instance_Of (A_Gen_T) /= A_Gen_T then Error_Msg_N ("duplicate instantiation of generic type", Actual); return New_List (Error); elsif not Is_Entity_Name (Actual) or else not Is_Type (Entity (Actual)) then Error_Msg_NE ("expect valid subtype mark to instantiate &", Actual, Gen_T); Abandon_Instantiation (Actual); else Act_T := Entity (Actual); -- Ada 2005 (AI-216): An Unchecked_Union subtype shall only be passed -- as a generic actual parameter if the corresponding formal type -- does not have a known_discriminant_part, or is a formal derived -- type that is an Unchecked_Union type. if Is_Unchecked_Union (Base_Type (Act_T)) then if not Has_Discriminants (A_Gen_T) or else (Is_Derived_Type (A_Gen_T) and then Is_Unchecked_Union (A_Gen_T)) then null; else Error_Msg_N ("Unchecked_Union cannot be the actual for a" & " discriminated formal type", Act_T); end if; end if; -- Deal with fixed/floating restrictions if Is_Floating_Point_Type (Act_T) then Check_Restriction (No_Floating_Point, Actual); elsif Is_Fixed_Point_Type (Act_T) then Check_Restriction (No_Fixed_Point, Actual); end if; -- Deal with error of using incomplete type as generic actual. -- This includes limited views of a type, even if the non-limited -- view may be available. if Ekind (Act_T) = E_Incomplete_Type or else (Is_Class_Wide_Type (Act_T) and then Ekind (Root_Type (Act_T)) = E_Incomplete_Type) then -- If the formal is an incomplete type, the actual can be -- incomplete as well. if Ekind (A_Gen_T) = E_Incomplete_Type then null; elsif Is_Class_Wide_Type (Act_T) or else No (Full_View (Act_T)) then Error_Msg_N ("premature use of incomplete type", Actual); Abandon_Instantiation (Actual); else Act_T := Full_View (Act_T); Set_Entity (Actual, Act_T); if Has_Private_Component (Act_T) then Error_Msg_N ("premature use of type with private component", Actual); end if; end if; -- Deal with error of premature use of private type as generic actual elsif Is_Private_Type (Act_T) and then Is_Private_Type (Base_Type (Act_T)) and then not Is_Generic_Type (Act_T) and then not Is_Derived_Type (Act_T) and then No (Full_View (Root_Type (Act_T))) then -- If the formal is an incomplete type, the actual can be -- private or incomplete as well. if Ekind (A_Gen_T) = E_Incomplete_Type then null; else Error_Msg_N ("premature use of private type", Actual); end if; elsif Has_Private_Component (Act_T) then Error_Msg_N ("premature use of type with private component", Actual); end if; Set_Instance_Of (A_Gen_T, Act_T); -- If the type is generic, the class-wide type may also be used if Is_Tagged_Type (A_Gen_T) and then Is_Tagged_Type (Act_T) and then not Is_Class_Wide_Type (A_Gen_T) then Set_Instance_Of (Class_Wide_Type (A_Gen_T), Class_Wide_Type (Act_T)); end if; if not Is_Abstract_Type (A_Gen_T) and then Is_Abstract_Type (Act_T) then Error_Msg_N ("actual of non-abstract formal cannot be abstract", Actual); end if; -- A generic scalar type is a first subtype for which we generate -- an anonymous base type. Indicate that the instance of this base -- is the base type of the actual. if Is_Scalar_Type (A_Gen_T) then Set_Instance_Of (Etype (A_Gen_T), Etype (Act_T)); end if; end if; if Error_Posted (Act_T) then null; else case Nkind (Def) is when N_Formal_Private_Type_Definition => Validate_Private_Type_Instance; when N_Formal_Incomplete_Type_Definition => Validate_Incomplete_Type_Instance; when N_Formal_Derived_Type_Definition => Validate_Derived_Type_Instance; when N_Formal_Discrete_Type_Definition => if not Is_Discrete_Type (Act_T) then Error_Msg_NE ("expect discrete type in instantiation of&", Actual, Gen_T); Abandon_Instantiation (Actual); end if; when N_Formal_Signed_Integer_Type_Definition => if not Is_Signed_Integer_Type (Act_T) then Error_Msg_NE ("expect signed integer type in instantiation of&", Actual, Gen_T); Abandon_Instantiation (Actual); end if; when N_Formal_Modular_Type_Definition => if not Is_Modular_Integer_Type (Act_T) then Error_Msg_NE ("expect modular type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; when N_Formal_Floating_Point_Definition => if not Is_Floating_Point_Type (Act_T) then Error_Msg_NE ("expect float type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; when N_Formal_Ordinary_Fixed_Point_Definition => if not Is_Ordinary_Fixed_Point_Type (Act_T) then Error_Msg_NE ("expect ordinary fixed point type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; when N_Formal_Decimal_Fixed_Point_Definition => if not Is_Decimal_Fixed_Point_Type (Act_T) then Error_Msg_NE ("expect decimal type in instantiation of &", Actual, Gen_T); Abandon_Instantiation (Actual); end if; when N_Array_Type_Definition => Validate_Array_Type_Instance; when N_Access_To_Object_Definition => Validate_Access_Type_Instance; when N_Access_Function_Definition | N_Access_Procedure_Definition => Validate_Access_Subprogram_Instance; when N_Record_Definition => Validate_Interface_Type_Instance; when N_Derived_Type_Definition => Validate_Derived_Interface_Type_Instance; when others => raise Program_Error; end case; end if; Subt := New_Copy (Gen_T); -- Use adjusted sloc of subtype name as the location for other nodes in -- the subtype declaration. Loc := Sloc (Subt); Decl_Node := Make_Subtype_Declaration (Loc, Defining_Identifier => Subt, Subtype_Indication => New_Reference_To (Act_T, Loc)); if Is_Private_Type (Act_T) then Set_Has_Private_View (Subtype_Indication (Decl_Node)); elsif Is_Access_Type (Act_T) and then Is_Private_Type (Designated_Type (Act_T)) then Set_Has_Private_View (Subtype_Indication (Decl_Node)); end if; Decl_Nodes := New_List (Decl_Node); -- Flag actual derived types so their elaboration produces the -- appropriate renamings for the primitive operations of the ancestor. -- Flag actual for formal private types as well, to determine whether -- operations in the private part may override inherited operations. -- If the formal has an interface list, the ancestor is not the -- parent, but the analyzed formal that includes the interface -- operations of all its progenitors. -- Same treatment for formal private types, so we can check whether the -- type is tagged limited when validating derivations in the private -- part. (See AI05-096). if Nkind (Def) = N_Formal_Derived_Type_Definition then if Present (Interface_List (Def)) then Set_Generic_Parent_Type (Decl_Node, A_Gen_T); else Set_Generic_Parent_Type (Decl_Node, Ancestor); end if; elsif Nkind_In (Def, N_Formal_Private_Type_Definition, N_Formal_Incomplete_Type_Definition) then Set_Generic_Parent_Type (Decl_Node, A_Gen_T); end if; -- If the actual is a synchronized type that implements an interface, -- the primitive operations are attached to the corresponding record, -- and we have to treat it as an additional generic actual, so that its -- primitive operations become visible in the instance. The task or -- protected type itself does not carry primitive operations. if Is_Concurrent_Type (Act_T) and then Is_Tagged_Type (Act_T) and then Present (Corresponding_Record_Type (Act_T)) and then Present (Ancestor) and then Is_Interface (Ancestor) then declare Corr_Rec : constant Entity_Id := Corresponding_Record_Type (Act_T); New_Corr : Entity_Id; Corr_Decl : Node_Id; begin New_Corr := Make_Temporary (Loc, 'S'); Corr_Decl := Make_Subtype_Declaration (Loc, Defining_Identifier => New_Corr, Subtype_Indication => New_Reference_To (Corr_Rec, Loc)); Append_To (Decl_Nodes, Corr_Decl); if Ekind (Act_T) = E_Task_Type then Set_Ekind (Subt, E_Task_Subtype); else Set_Ekind (Subt, E_Protected_Subtype); end if; Set_Corresponding_Record_Type (Subt, Corr_Rec); Set_Generic_Parent_Type (Corr_Decl, Ancestor); Set_Generic_Parent_Type (Decl_Node, Empty); end; end if; return Decl_Nodes; end Instantiate_Type; --------------------- -- Is_In_Main_Unit -- --------------------- function Is_In_Main_Unit (N : Node_Id) return Boolean is Unum : constant Unit_Number_Type := Get_Source_Unit (N); Current_Unit : Node_Id; begin if Unum = Main_Unit then return True; -- If the current unit is a subunit then it is either the main unit or -- is being compiled as part of the main unit. elsif Nkind (N) = N_Compilation_Unit then return Nkind (Unit (N)) = N_Subunit; end if; Current_Unit := Parent (N); while Present (Current_Unit) and then Nkind (Current_Unit) /= N_Compilation_Unit loop Current_Unit := Parent (Current_Unit); end loop; -- The instantiation node is in the main unit, or else the current node -- (perhaps as the result of nested instantiations) is in the main unit, -- or in the declaration of the main unit, which in this last case must -- be a body. return Unum = Main_Unit or else Current_Unit = Cunit (Main_Unit) or else Current_Unit = Library_Unit (Cunit (Main_Unit)) or else (Present (Library_Unit (Current_Unit)) and then Is_In_Main_Unit (Library_Unit (Current_Unit))); end Is_In_Main_Unit; ---------------------------- -- Load_Parent_Of_Generic -- ---------------------------- procedure Load_Parent_Of_Generic (N : Node_Id; Spec : Node_Id; Body_Optional : Boolean := False) is Comp_Unit : constant Node_Id := Cunit (Get_Source_Unit (Spec)); Save_Style_Check : constant Boolean := Style_Check; True_Parent : Node_Id; Inst_Node : Node_Id; OK : Boolean; Previous_Instances : constant Elist_Id := New_Elmt_List; procedure Collect_Previous_Instances (Decls : List_Id); -- Collect all instantiations in the given list of declarations, that -- precede the generic that we need to load. If the bodies of these -- instantiations are available, we must analyze them, to ensure that -- the public symbols generated are the same when the unit is compiled -- to generate code, and when it is compiled in the context of a unit -- that needs a particular nested instance. This process is applied to -- both package and subprogram instances. -------------------------------- -- Collect_Previous_Instances -- -------------------------------- procedure Collect_Previous_Instances (Decls : List_Id) is Decl : Node_Id; begin Decl := First (Decls); while Present (Decl) loop if Sloc (Decl) >= Sloc (Inst_Node) then return; -- If Decl is an instantiation, then record it as requiring -- instantiation of the corresponding body, except if it is an -- abbreviated instantiation generated internally for conformance -- checking purposes only for the case of a formal package -- declared without a box (see Instantiate_Formal_Package). Such -- an instantiation does not generate any code (the actual code -- comes from actual) and thus does not need to be analyzed here. -- If the instantiation appears with a generic package body it is -- not analyzed here either. elsif Nkind (Decl) = N_Package_Instantiation and then not Is_Internal (Defining_Entity (Decl)) then Append_Elmt (Decl, Previous_Instances); -- For a subprogram instantiation, omit instantiations intrinsic -- operations (Unchecked_Conversions, etc.) that have no bodies. elsif Nkind_In (Decl, N_Function_Instantiation, N_Procedure_Instantiation) and then not Is_Intrinsic_Subprogram (Entity (Name (Decl))) then Append_Elmt (Decl, Previous_Instances); elsif Nkind (Decl) = N_Package_Declaration then Collect_Previous_Instances (Visible_Declarations (Specification (Decl))); Collect_Previous_Instances (Private_Declarations (Specification (Decl))); -- Previous non-generic bodies may contain instances as well elsif Nkind (Decl) = N_Package_Body and then Ekind (Corresponding_Spec (Decl)) /= E_Generic_Package then Collect_Previous_Instances (Declarations (Decl)); elsif Nkind (Decl) = N_Subprogram_Body and then not Acts_As_Spec (Decl) and then not Is_Generic_Subprogram (Corresponding_Spec (Decl)) then Collect_Previous_Instances (Declarations (Decl)); end if; Next (Decl); end loop; end Collect_Previous_Instances; -- Start of processing for Load_Parent_Of_Generic begin if not In_Same_Source_Unit (N, Spec) or else Nkind (Unit (Comp_Unit)) = N_Package_Declaration or else (Nkind (Unit (Comp_Unit)) = N_Package_Body and then not Is_In_Main_Unit (Spec)) then -- Find body of parent of spec, and analyze it. A special case arises -- when the parent is an instantiation, that is to say when we are -- currently instantiating a nested generic. In that case, there is -- no separate file for the body of the enclosing instance. Instead, -- the enclosing body must be instantiated as if it were a pending -- instantiation, in order to produce the body for the nested generic -- we require now. Note that in that case the generic may be defined -- in a package body, the instance defined in the same package body, -- and the original enclosing body may not be in the main unit. Inst_Node := Empty; True_Parent := Parent (Spec); while Present (True_Parent) and then Nkind (True_Parent) /= N_Compilation_Unit loop if Nkind (True_Parent) = N_Package_Declaration and then Nkind (Original_Node (True_Parent)) = N_Package_Instantiation then -- Parent is a compilation unit that is an instantiation. -- Instantiation node has been replaced with package decl. Inst_Node := Original_Node (True_Parent); exit; elsif Nkind (True_Parent) = N_Package_Declaration and then Present (Generic_Parent (Specification (True_Parent))) and then Nkind (Parent (True_Parent)) /= N_Compilation_Unit then -- Parent is an instantiation within another specification. -- Declaration for instance has been inserted before original -- instantiation node. A direct link would be preferable? Inst_Node := Next (True_Parent); while Present (Inst_Node) and then Nkind (Inst_Node) /= N_Package_Instantiation loop Next (Inst_Node); end loop; -- If the instance appears within a generic, and the generic -- unit is defined within a formal package of the enclosing -- generic, there is no generic body available, and none -- needed. A more precise test should be used ??? if No (Inst_Node) then return; end if; exit; else True_Parent := Parent (True_Parent); end if; end loop; -- Case where we are currently instantiating a nested generic if Present (Inst_Node) then if Nkind (Parent (True_Parent)) = N_Compilation_Unit then -- Instantiation node and declaration of instantiated package -- were exchanged when only the declaration was needed. -- Restore instantiation node before proceeding with body. Set_Unit (Parent (True_Parent), Inst_Node); end if; -- Now complete instantiation of enclosing body, if it appears in -- some other unit. If it appears in the current unit, the body -- will have been instantiated already. if No (Corresponding_Body (Instance_Spec (Inst_Node))) then -- We need to determine the expander mode to instantiate the -- enclosing body. Because the generic body we need may use -- global entities declared in the enclosing package (including -- aggregates) it is in general necessary to compile this body -- with expansion enabled, except if we are within a generic -- package, in which case the usual generic rule applies. declare Exp_Status : Boolean := True; Scop : Entity_Id; begin -- Loop through scopes looking for generic package Scop := Scope (Defining_Entity (Instance_Spec (Inst_Node))); while Present (Scop) and then Scop /= Standard_Standard loop if Ekind (Scop) = E_Generic_Package then Exp_Status := False; exit; end if; Scop := Scope (Scop); end loop; -- Collect previous instantiations in the unit that contains -- the desired generic. if Nkind (Parent (True_Parent)) /= N_Compilation_Unit and then not Body_Optional then declare Decl : Elmt_Id; Info : Pending_Body_Info; Par : Node_Id; begin Par := Parent (Inst_Node); while Present (Par) loop exit when Nkind (Parent (Par)) = N_Compilation_Unit; Par := Parent (Par); end loop; pragma Assert (Present (Par)); if Nkind (Par) = N_Package_Body then Collect_Previous_Instances (Declarations (Par)); elsif Nkind (Par) = N_Package_Declaration then Collect_Previous_Instances (Visible_Declarations (Specification (Par))); Collect_Previous_Instances (Private_Declarations (Specification (Par))); else -- Enclosing unit is a subprogram body. In this -- case all instance bodies are processed in order -- and there is no need to collect them separately. null; end if; Decl := First_Elmt (Previous_Instances); while Present (Decl) loop Info := (Inst_Node => Node (Decl), Act_Decl => Instance_Spec (Node (Decl)), Expander_Status => Exp_Status, Current_Sem_Unit => Get_Code_Unit (Sloc (Node (Decl))), Scope_Suppress => Scope_Suppress, Local_Suppress_Stack_Top => Local_Suppress_Stack_Top, Version => Ada_Version); -- Package instance if Nkind (Node (Decl)) = N_Package_Instantiation then Instantiate_Package_Body (Info, Body_Optional => True); -- Subprogram instance else -- The instance_spec is the wrapper package, -- and the subprogram declaration is the last -- declaration in the wrapper. Info.Act_Decl := Last (Visible_Declarations (Specification (Info.Act_Decl))); Instantiate_Subprogram_Body (Info, Body_Optional => True); end if; Next_Elmt (Decl); end loop; end; end if; Instantiate_Package_Body (Body_Info => ((Inst_Node => Inst_Node, Act_Decl => True_Parent, Expander_Status => Exp_Status, Current_Sem_Unit => Get_Code_Unit (Sloc (Inst_Node)), Scope_Suppress => Scope_Suppress, Local_Suppress_Stack_Top => Local_Suppress_Stack_Top, Version => Ada_Version)), Body_Optional => Body_Optional); end; end if; -- Case where we are not instantiating a nested generic else Opt.Style_Check := False; Expander_Mode_Save_And_Set (True); Load_Needed_Body (Comp_Unit, OK); Opt.Style_Check := Save_Style_Check; Expander_Mode_Restore; if not OK and then Unit_Requires_Body (Defining_Entity (Spec)) and then not Body_Optional then declare Bname : constant Unit_Name_Type := Get_Body_Name (Get_Unit_Name (Unit (Comp_Unit))); begin -- In CodePeer mode, the missing body may make the analysis -- incomplete, but we do not treat it as fatal. if CodePeer_Mode then return; else Error_Msg_Unit_1 := Bname; Error_Msg_N ("this instantiation requires$!", N); Error_Msg_File_1 := Get_File_Name (Bname, Subunit => False); Error_Msg_N ("\but file{ was not found!", N); raise Unrecoverable_Error; end if; end; end if; end if; end if; -- If loading parent of the generic caused an instantiation circularity, -- we abandon compilation at this point, because otherwise in some cases -- we get into trouble with infinite recursions after this point. if Circularity_Detected then raise Unrecoverable_Error; end if; end Load_Parent_Of_Generic; --------------------------------- -- Map_Formal_Package_Entities -- --------------------------------- procedure Map_Formal_Package_Entities (Form : Entity_Id; Act : Entity_Id) is E1 : Entity_Id; E2 : Entity_Id; begin Set_Instance_Of (Form, Act); -- Traverse formal and actual package to map the corresponding entities. -- We skip over internal entities that may be generated during semantic -- analysis, and find the matching entities by name, given that they -- must appear in the same order. E1 := First_Entity (Form); E2 := First_Entity (Act); while Present (E1) and then E1 /= First_Private_Entity (Form) loop -- Could this test be a single condition??? -- Seems like it could, and isn't FPE (Form) a constant anyway??? if not Is_Internal (E1) and then Present (Parent (E1)) and then not Is_Class_Wide_Type (E1) and then not Is_Internal_Name (Chars (E1)) then while Present (E2) and then Chars (E2) /= Chars (E1) loop Next_Entity (E2); end loop; if No (E2) then exit; else Set_Instance_Of (E1, E2); if Is_Type (E1) and then Is_Tagged_Type (E2) then Set_Instance_Of (Class_Wide_Type (E1), Class_Wide_Type (E2)); end if; if Is_Constrained (E1) then Set_Instance_Of (Base_Type (E1), Base_Type (E2)); end if; if Ekind (E1) = E_Package and then No (Renamed_Object (E1)) then Map_Formal_Package_Entities (E1, E2); end if; end if; end if; Next_Entity (E1); end loop; end Map_Formal_Package_Entities; ----------------------- -- Move_Freeze_Nodes -- ----------------------- procedure Move_Freeze_Nodes (Out_Of : Entity_Id; After : Node_Id; L : List_Id) is Decl : Node_Id; Next_Decl : Node_Id; Next_Node : Node_Id := After; Spec : Node_Id; function Is_Outer_Type (T : Entity_Id) return Boolean; -- Check whether entity is declared in a scope external to that of the -- generic unit. ------------------- -- Is_Outer_Type -- ------------------- function Is_Outer_Type (T : Entity_Id) return Boolean is Scop : Entity_Id := Scope (T); begin if Scope_Depth (Scop) < Scope_Depth (Out_Of) then return True; else while Scop /= Standard_Standard loop if Scop = Out_Of then return False; else Scop := Scope (Scop); end if; end loop; return True; end if; end Is_Outer_Type; -- Start of processing for Move_Freeze_Nodes begin if No (L) then return; end if; -- First remove the freeze nodes that may appear before all other -- declarations. Decl := First (L); while Present (Decl) and then Nkind (Decl) = N_Freeze_Entity and then Is_Outer_Type (Entity (Decl)) loop Decl := Remove_Head (L); Insert_After (Next_Node, Decl); Set_Analyzed (Decl, False); Next_Node := Decl; Decl := First (L); end loop; -- Next scan the list of declarations and remove each freeze node that -- appears ahead of the current node. while Present (Decl) loop while Present (Next (Decl)) and then Nkind (Next (Decl)) = N_Freeze_Entity and then Is_Outer_Type (Entity (Next (Decl))) loop Next_Decl := Remove_Next (Decl); Insert_After (Next_Node, Next_Decl); Set_Analyzed (Next_Decl, False); Next_Node := Next_Decl; end loop; -- If the declaration is a nested package or concurrent type, then -- recurse. Nested generic packages will have been processed from the -- inside out. case Nkind (Decl) is when N_Package_Declaration => Spec := Specification (Decl); when N_Task_Type_Declaration => Spec := Task_Definition (Decl); when N_Protected_Type_Declaration => Spec := Protected_Definition (Decl); when others => Spec := Empty; end case; if Present (Spec) then Move_Freeze_Nodes (Out_Of, Next_Node, Visible_Declarations (Spec)); Move_Freeze_Nodes (Out_Of, Next_Node, Private_Declarations (Spec)); end if; Next (Decl); end loop; end Move_Freeze_Nodes; ---------------- -- Next_Assoc -- ---------------- function Next_Assoc (E : Assoc_Ptr) return Assoc_Ptr is begin return Generic_Renamings.Table (E).Next_In_HTable; end Next_Assoc; ------------------------ -- Preanalyze_Actuals -- ------------------------ procedure Preanalyze_Actuals (N : Node_Id) is Assoc : Node_Id; Act : Node_Id; Errs : constant Int := Serious_Errors_Detected; Cur : Entity_Id := Empty; -- Current homograph of the instance name Vis : Boolean; -- Saved visibility status of the current homograph begin Assoc := First (Generic_Associations (N)); -- If the instance is a child unit, its name may hide an outer homonym, -- so make it invisible to perform name resolution on the actuals. if Nkind (Defining_Unit_Name (N)) = N_Defining_Program_Unit_Name and then Present (Current_Entity (Defining_Identifier (Defining_Unit_Name (N)))) then Cur := Current_Entity (Defining_Identifier (Defining_Unit_Name (N))); if Is_Compilation_Unit (Cur) then Vis := Is_Immediately_Visible (Cur); Set_Is_Immediately_Visible (Cur, False); else Cur := Empty; end if; end if; while Present (Assoc) loop if Nkind (Assoc) /= N_Others_Choice then Act := Explicit_Generic_Actual_Parameter (Assoc); -- Within a nested instantiation, a defaulted actual is an empty -- association, so nothing to analyze. If the subprogram actual -- is an attribute, analyze prefix only, because actual is not a -- complete attribute reference. -- If actual is an allocator, analyze expression only. The full -- analysis can generate code, and if instance is a compilation -- unit we have to wait until the package instance is installed -- to have a proper place to insert this code. -- String literals may be operators, but at this point we do not -- know whether the actual is a formal subprogram or a string. if No (Act) then null; elsif Nkind (Act) = N_Attribute_Reference then Analyze (Prefix (Act)); elsif Nkind (Act) = N_Explicit_Dereference then Analyze (Prefix (Act)); elsif Nkind (Act) = N_Allocator then declare Expr : constant Node_Id := Expression (Act); begin if Nkind (Expr) = N_Subtype_Indication then Analyze (Subtype_Mark (Expr)); -- Analyze separately each discriminant constraint, when -- given with a named association. declare Constr : Node_Id; begin Constr := First (Constraints (Constraint (Expr))); while Present (Constr) loop if Nkind (Constr) = N_Discriminant_Association then Analyze (Expression (Constr)); else Analyze (Constr); end if; Next (Constr); end loop; end; else Analyze (Expr); end if; end; elsif Nkind (Act) /= N_Operator_Symbol then Analyze (Act); end if; if Errs /= Serious_Errors_Detected then -- Do a minimal analysis of the generic, to prevent spurious -- warnings complaining about the generic being unreferenced, -- before abandoning the instantiation. Analyze (Name (N)); if Is_Entity_Name (Name (N)) and then Etype (Name (N)) /= Any_Type then Generate_Reference (Entity (Name (N)), Name (N)); Set_Is_Instantiated (Entity (Name (N))); end if; if Present (Cur) then -- For the case of a child instance hiding an outer homonym, -- provide additional warning which might explain the error. Set_Is_Immediately_Visible (Cur, Vis); Error_Msg_NE ("& hides outer unit with the same name?", N, Defining_Unit_Name (N)); end if; Abandon_Instantiation (Act); end if; end if; Next (Assoc); end loop; if Present (Cur) then Set_Is_Immediately_Visible (Cur, Vis); end if; end Preanalyze_Actuals; ------------------- -- Remove_Parent -- ------------------- procedure Remove_Parent (In_Body : Boolean := False) is S : Entity_Id := Current_Scope; -- S is the scope containing the instantiation just completed. The scope -- stack contains the parent instances of the instantiation, followed by -- the original S. Cur_P : Entity_Id; E : Entity_Id; P : Entity_Id; Hidden : Elmt_Id; begin -- After child instantiation is complete, remove from scope stack the -- extra copy of the current scope, and then remove parent instances. if not In_Body then Pop_Scope; while Current_Scope /= S loop P := Current_Scope; End_Package_Scope (Current_Scope); if In_Open_Scopes (P) then E := First_Entity (P); while Present (E) loop Set_Is_Immediately_Visible (E, True); Next_Entity (E); end loop; -- If instantiation is declared in a block, it is the enclosing -- scope that might be a parent instance. Note that only one -- block can be involved, because the parent instances have -- been installed within it. if Ekind (P) = E_Block then Cur_P := Scope (P); else Cur_P := P; end if; if Is_Generic_Instance (Cur_P) and then P /= Current_Scope then -- We are within an instance of some sibling. Retain -- visibility of parent, for proper subsequent cleanup, and -- reinstall private declarations as well. Set_In_Private_Part (P); Install_Private_Declarations (P); end if; -- If the ultimate parent is a top-level unit recorded in -- Instance_Parent_Unit, then reset its visibility to what it was -- before instantiation. (It's not clear what the purpose is of -- testing whether Scope (P) is In_Open_Scopes, but that test was -- present before the ultimate parent test was added.???) elsif not In_Open_Scopes (Scope (P)) or else (P = Instance_Parent_Unit and then not Parent_Unit_Visible) then Set_Is_Immediately_Visible (P, False); -- If the current scope is itself an instantiation of a generic -- nested within P, and we are in the private part of body of this -- instantiation, restore the full views of P, that were removed -- in End_Package_Scope above. This obscure case can occur when a -- subunit of a generic contains an instance of a child unit of -- its generic parent unit. elsif S = Current_Scope and then Is_Generic_Instance (S) then declare Par : constant Entity_Id := Generic_Parent (Specification (Unit_Declaration_Node (S))); begin if Present (Par) and then P = Scope (Par) and then (In_Package_Body (S) or else In_Private_Part (S)) then Set_In_Private_Part (P); Install_Private_Declarations (P); end if; end; end if; end loop; -- Reset visibility of entities in the enclosing scope Set_Is_Hidden_Open_Scope (Current_Scope, False); Hidden := First_Elmt (Hidden_Entities); while Present (Hidden) loop Set_Is_Immediately_Visible (Node (Hidden), True); Next_Elmt (Hidden); end loop; else -- Each body is analyzed separately, and there is no context that -- needs preserving from one body instance to the next, so remove all -- parent scopes that have been installed. while Present (S) loop End_Package_Scope (S); Set_Is_Immediately_Visible (S, False); S := Current_Scope; exit when S = Standard_Standard; end loop; end if; end Remove_Parent; ----------------- -- Restore_Env -- ----------------- procedure Restore_Env is Saved : Instance_Env renames Instance_Envs.Table (Instance_Envs.Last); begin if No (Current_Instantiated_Parent.Act_Id) then -- Restore environment after subprogram inlining Restore_Private_Views (Empty); end if; Current_Instantiated_Parent := Saved.Instantiated_Parent; Exchanged_Views := Saved.Exchanged_Views; Hidden_Entities := Saved.Hidden_Entities; Current_Sem_Unit := Saved.Current_Sem_Unit; Parent_Unit_Visible := Saved.Parent_Unit_Visible; Instance_Parent_Unit := Saved.Instance_Parent_Unit; Restore_Opt_Config_Switches (Saved.Switches); Instance_Envs.Decrement_Last; end Restore_Env; --------------------------- -- Restore_Private_Views -- --------------------------- procedure Restore_Private_Views (Pack_Id : Entity_Id; Is_Package : Boolean := True) is M : Elmt_Id; E : Entity_Id; Typ : Entity_Id; Dep_Elmt : Elmt_Id; Dep_Typ : Node_Id; procedure Restore_Nested_Formal (Formal : Entity_Id); -- Hide the generic formals of formal packages declared with box which -- were reachable in the current instantiation. --------------------------- -- Restore_Nested_Formal -- --------------------------- procedure Restore_Nested_Formal (Formal : Entity_Id) is Ent : Entity_Id; begin if Present (Renamed_Object (Formal)) and then Denotes_Formal_Package (Renamed_Object (Formal), True) then return; elsif Present (Associated_Formal_Package (Formal)) then Ent := First_Entity (Formal); while Present (Ent) loop exit when Ekind (Ent) = E_Package and then Renamed_Entity (Ent) = Renamed_Entity (Formal); Set_Is_Hidden (Ent); Set_Is_Potentially_Use_Visible (Ent, False); -- If package, then recurse if Ekind (Ent) = E_Package then Restore_Nested_Formal (Ent); end if; Next_Entity (Ent); end loop; end if; end Restore_Nested_Formal; -- Start of processing for Restore_Private_Views begin M := First_Elmt (Exchanged_Views); while Present (M) loop Typ := Node (M); -- Subtypes of types whose views have been exchanged, and that are -- defined within the instance, were not on the Private_Dependents -- list on entry to the instance, so they have to be exchanged -- explicitly now, in order to remain consistent with the view of the -- parent type. if Ekind_In (Typ, E_Private_Type, E_Limited_Private_Type, E_Record_Type_With_Private) then Dep_Elmt := First_Elmt (Private_Dependents (Typ)); while Present (Dep_Elmt) loop Dep_Typ := Node (Dep_Elmt); if Scope (Dep_Typ) = Pack_Id and then Present (Full_View (Dep_Typ)) then Replace_Elmt (Dep_Elmt, Full_View (Dep_Typ)); Exchange_Declarations (Dep_Typ); end if; Next_Elmt (Dep_Elmt); end loop; end if; Exchange_Declarations (Node (M)); Next_Elmt (M); end loop; if No (Pack_Id) then return; end if; -- Make the generic formal parameters private, and make the formal types -- into subtypes of the actuals again. E := First_Entity (Pack_Id); while Present (E) loop Set_Is_Hidden (E, True); if Is_Type (E) and then Nkind (Parent (E)) = N_Subtype_Declaration then Set_Is_Generic_Actual_Type (E, False); -- An unusual case of aliasing: the actual may also be directly -- visible in the generic, and be private there, while it is fully -- visible in the context of the instance. The internal subtype -- is private in the instance but has full visibility like its -- parent in the enclosing scope. This enforces the invariant that -- the privacy status of all private dependents of a type coincide -- with that of the parent type. This can only happen when a -- generic child unit is instantiated within a sibling. if Is_Private_Type (E) and then not Is_Private_Type (Etype (E)) then Exchange_Declarations (E); end if; elsif Ekind (E) = E_Package then -- The end of the renaming list is the renaming of the generic -- package itself. If the instance is a subprogram, all entities -- in the corresponding package are renamings. If this entity is -- a formal package, make its own formals private as well. The -- actual in this case is itself the renaming of an instantiation. -- If the entity is not a package renaming, it is the entity -- created to validate formal package actuals: ignore it. -- If the actual is itself a formal package for the enclosing -- generic, or the actual for such a formal package, it remains -- visible on exit from the instance, and therefore nothing needs -- to be done either, except to keep it accessible. if Is_Package and then Renamed_Object (E) = Pack_Id then exit; elsif Nkind (Parent (E)) /= N_Package_Renaming_Declaration then null; elsif Denotes_Formal_Package (Renamed_Object (E), True, Pack_Id) then Set_Is_Hidden (E, False); else declare Act_P : constant Entity_Id := Renamed_Object (E); Id : Entity_Id; begin Id := First_Entity (Act_P); while Present (Id) and then Id /= First_Private_Entity (Act_P) loop exit when Ekind (Id) = E_Package and then Renamed_Object (Id) = Act_P; Set_Is_Hidden (Id, True); Set_Is_Potentially_Use_Visible (Id, In_Use (Act_P)); if Ekind (Id) = E_Package then Restore_Nested_Formal (Id); end if; Next_Entity (Id); end loop; end; end if; end if; Next_Entity (E); end loop; end Restore_Private_Views; -------------- -- Save_Env -- -------------- procedure Save_Env (Gen_Unit : Entity_Id; Act_Unit : Entity_Id) is begin Init_Env; Set_Instance_Env (Gen_Unit, Act_Unit); end Save_Env; ---------------------------- -- Save_Global_References -- ---------------------------- procedure Save_Global_References (N : Node_Id) is Gen_Scope : Entity_Id; E : Entity_Id; N2 : Node_Id; function Is_Global (E : Entity_Id) return Boolean; -- Check whether entity is defined outside of generic unit. Examine the -- scope of an entity, and the scope of the scope, etc, until we find -- either Standard, in which case the entity is global, or the generic -- unit itself, which indicates that the entity is local. If the entity -- is the generic unit itself, as in the case of a recursive call, or -- the enclosing generic unit, if different from the current scope, then -- it is local as well, because it will be replaced at the point of -- instantiation. On the other hand, if it is a reference to a child -- unit of a common ancestor, which appears in an instantiation, it is -- global because it is used to denote a specific compilation unit at -- the time the instantiations will be analyzed. procedure Reset_Entity (N : Node_Id); -- Save semantic information on global entity so that it is not resolved -- again at instantiation time. procedure Save_Entity_Descendants (N : Node_Id); -- Apply Save_Global_References to the two syntactic descendants of -- non-terminal nodes that carry an Associated_Node and are processed -- through Reset_Entity. Once the global entity (if any) has been -- captured together with its type, only two syntactic descendants need -- to be traversed to complete the processing of the tree rooted at N. -- This applies to Selected_Components, Expanded_Names, and to Operator -- nodes. N can also be a character literal, identifier, or operator -- symbol node, but the call has no effect in these cases. procedure Save_Global_Defaults (N1, N2 : Node_Id); -- Default actuals in nested instances must be handled specially -- because there is no link to them from the original tree. When an -- actual subprogram is given by a default, we add an explicit generic -- association for it in the instantiation node. When we save the -- global references on the name of the instance, we recover the list -- of generic associations, and add an explicit one to the original -- generic tree, through which a global actual can be preserved. -- Similarly, if a child unit is instantiated within a sibling, in the -- context of the parent, we must preserve the identifier of the parent -- so that it can be properly resolved in a subsequent instantiation. procedure Save_Global_Descendant (D : Union_Id); -- Apply Save_Global_References recursively to the descendents of the -- current node. procedure Save_References (N : Node_Id); -- This is the recursive procedure that does the work, once the -- enclosing generic scope has been established. --------------- -- Is_Global -- --------------- function Is_Global (E : Entity_Id) return Boolean is Se : Entity_Id; function Is_Instance_Node (Decl : Node_Id) return Boolean; -- Determine whether the parent node of a reference to a child unit -- denotes an instantiation or a formal package, in which case the -- reference to the child unit is global, even if it appears within -- the current scope (e.g. when the instance appears within the body -- of an ancestor). ---------------------- -- Is_Instance_Node -- ---------------------- function Is_Instance_Node (Decl : Node_Id) return Boolean is begin return Nkind (Decl) in N_Generic_Instantiation or else Nkind (Original_Node (Decl)) = N_Formal_Package_Declaration; end Is_Instance_Node; -- Start of processing for Is_Global begin if E = Gen_Scope then return False; elsif E = Standard_Standard then return True; elsif Is_Child_Unit (E) and then (Is_Instance_Node (Parent (N2)) or else (Nkind (Parent (N2)) = N_Expanded_Name and then N2 = Selector_Name (Parent (N2)) and then Is_Instance_Node (Parent (Parent (N2))))) then return True; else Se := Scope (E); while Se /= Gen_Scope loop if Se = Standard_Standard then return True; else Se := Scope (Se); end if; end loop; return False; end if; end Is_Global; ------------------ -- Reset_Entity -- ------------------ procedure Reset_Entity (N : Node_Id) is procedure Set_Global_Type (N : Node_Id; N2 : Node_Id); -- If the type of N2 is global to the generic unit, save the type in -- the generic node. Just as we perform name capture for explicit -- references within the generic, we must capture the global types -- of local entities because they may participate in resolution in -- the instance. function Top_Ancestor (E : Entity_Id) return Entity_Id; -- Find the ultimate ancestor of the current unit. If it is not a -- generic unit, then the name of the current unit in the prefix of -- an expanded name must be replaced with its generic homonym to -- ensure that it will be properly resolved in an instance. --------------------- -- Set_Global_Type -- --------------------- procedure Set_Global_Type (N : Node_Id; N2 : Node_Id) is Typ : constant Entity_Id := Etype (N2); begin Set_Etype (N, Typ); if Entity (N) /= N2 and then Has_Private_View (Entity (N)) then -- If the entity of N is not the associated node, this is a -- nested generic and it has an associated node as well, whose -- type is already the full view (see below). Indicate that the -- original node has a private view. Set_Has_Private_View (N); end if; -- If not a private type, nothing else to do if not Is_Private_Type (Typ) then if Is_Array_Type (Typ) and then Is_Private_Type (Component_Type (Typ)) then Set_Has_Private_View (N); end if; -- If it is a derivation of a private type in a context where no -- full view is needed, nothing to do either. elsif No (Full_View (Typ)) and then Typ /= Etype (Typ) then null; -- Otherwise mark the type for flipping and use the full view when -- available. else Set_Has_Private_View (N); if Present (Full_View (Typ)) then Set_Etype (N2, Full_View (Typ)); end if; end if; end Set_Global_Type; ------------------ -- Top_Ancestor -- ------------------ function Top_Ancestor (E : Entity_Id) return Entity_Id is Par : Entity_Id; begin Par := E; while Is_Child_Unit (Par) loop Par := Scope (Par); end loop; return Par; end Top_Ancestor; -- Start of processing for Reset_Entity begin N2 := Get_Associated_Node (N); E := Entity (N2); if Present (E) then -- If the node is an entry call to an entry in an enclosing task, -- it is rewritten as a selected component. No global entity to -- preserve in this case, since the expansion will be redone in -- the instance. if not Nkind_In (E, N_Defining_Identifier, N_Defining_Character_Literal, N_Defining_Operator_Symbol) then Set_Associated_Node (N, Empty); Set_Etype (N, Empty); return; end if; -- If the entity is an itype created as a subtype of an access -- type with a null exclusion restore source entity for proper -- visibility. The itype will be created anew in the instance. if Is_Itype (E) and then Ekind (E) = E_Access_Subtype and then Is_Entity_Name (N) and then Chars (Etype (E)) = Chars (N) then E := Etype (E); Set_Entity (N2, E); Set_Etype (N2, E); end if; if Is_Global (E) then Set_Global_Type (N, N2); elsif Nkind (N) = N_Op_Concat and then Is_Generic_Type (Etype (N2)) and then (Base_Type (Etype (Right_Opnd (N2))) = Etype (N2) or else Base_Type (Etype (Left_Opnd (N2))) = Etype (N2)) and then Is_Intrinsic_Subprogram (E) then null; else -- Entity is local. Mark generic node as unresolved. -- Note that now it does not have an entity. Set_Associated_Node (N, Empty); Set_Etype (N, Empty); end if; if Nkind (Parent (N)) in N_Generic_Instantiation and then N = Name (Parent (N)) then Save_Global_Defaults (Parent (N), Parent (N2)); end if; elsif Nkind (Parent (N)) = N_Selected_Component and then Nkind (Parent (N2)) = N_Expanded_Name then if Is_Global (Entity (Parent (N2))) then Change_Selected_Component_To_Expanded_Name (Parent (N)); Set_Associated_Node (Parent (N), Parent (N2)); Set_Global_Type (Parent (N), Parent (N2)); Save_Entity_Descendants (N); -- If this is a reference to the current generic entity, replace -- by the name of the generic homonym of the current package. This -- is because in an instantiation Par.P.Q will not resolve to the -- name of the instance, whose enclosing scope is not necessarily -- Par. We use the generic homonym rather that the name of the -- generic itself because it may be hidden by a local declaration. elsif In_Open_Scopes (Entity (Parent (N2))) and then not Is_Generic_Unit (Top_Ancestor (Entity (Prefix (Parent (N2))))) then if Ekind (Entity (Parent (N2))) = E_Generic_Package then Rewrite (Parent (N), Make_Identifier (Sloc (N), Chars => Chars (Generic_Homonym (Entity (Parent (N2)))))); else Rewrite (Parent (N), Make_Identifier (Sloc (N), Chars => Chars (Selector_Name (Parent (N2))))); end if; end if; if Nkind (Parent (Parent (N))) in N_Generic_Instantiation and then Parent (N) = Name (Parent (Parent (N))) then Save_Global_Defaults (Parent (Parent (N)), Parent (Parent ((N2)))); end if; -- A selected component may denote a static constant that has been -- folded. If the static constant is global to the generic, capture -- its value. Otherwise the folding will happen in any instantiation. elsif Nkind (Parent (N)) = N_Selected_Component and then Nkind_In (Parent (N2), N_Integer_Literal, N_Real_Literal) then if Present (Entity (Original_Node (Parent (N2)))) and then Is_Global (Entity (Original_Node (Parent (N2)))) then Rewrite (Parent (N), New_Copy (Parent (N2))); Set_Analyzed (Parent (N), False); else null; end if; -- A selected component may be transformed into a parameterless -- function call. If the called entity is global, rewrite the node -- appropriately, i.e. as an extended name for the global entity. elsif Nkind (Parent (N)) = N_Selected_Component and then Nkind (Parent (N2)) = N_Function_Call and then N = Selector_Name (Parent (N)) then if No (Parameter_Associations (Parent (N2))) then if Is_Global (Entity (Name (Parent (N2)))) then Change_Selected_Component_To_Expanded_Name (Parent (N)); Set_Associated_Node (Parent (N), Name (Parent (N2))); Set_Global_Type (Parent (N), Name (Parent (N2))); Save_Entity_Descendants (N); else Set_Is_Prefixed_Call (Parent (N)); Set_Associated_Node (N, Empty); Set_Etype (N, Empty); end if; -- In Ada 2005, X.F may be a call to a primitive operation, -- rewritten as F (X). This rewriting will be done again in an -- instance, so keep the original node. Global entities will be -- captured as for other constructs. Indicate that this must -- resolve as a call, to prevent accidental overloading in the -- instance, if both a component and a primitive operation appear -- as candidates. else Set_Is_Prefixed_Call (Parent (N)); end if; -- Entity is local. Reset in generic unit, so that node is resolved -- anew at the point of instantiation. else Set_Associated_Node (N, Empty); Set_Etype (N, Empty); end if; end Reset_Entity; ----------------------------- -- Save_Entity_Descendants -- ----------------------------- procedure Save_Entity_Descendants (N : Node_Id) is begin case Nkind (N) is when N_Binary_Op => Save_Global_Descendant (Union_Id (Left_Opnd (N))); Save_Global_Descendant (Union_Id (Right_Opnd (N))); when N_Unary_Op => Save_Global_Descendant (Union_Id (Right_Opnd (N))); when N_Expanded_Name | N_Selected_Component => Save_Global_Descendant (Union_Id (Prefix (N))); Save_Global_Descendant (Union_Id (Selector_Name (N))); when N_Identifier | N_Character_Literal | N_Operator_Symbol => null; when others => raise Program_Error; end case; end Save_Entity_Descendants; -------------------------- -- Save_Global_Defaults -- -------------------------- procedure Save_Global_Defaults (N1, N2 : Node_Id) is Loc : constant Source_Ptr := Sloc (N1); Assoc2 : constant List_Id := Generic_Associations (N2); Gen_Id : constant Entity_Id := Get_Generic_Entity (N2); Assoc1 : List_Id; Act1 : Node_Id; Act2 : Node_Id; Def : Node_Id; Ndec : Node_Id; Subp : Entity_Id; Actual : Entity_Id; begin Assoc1 := Generic_Associations (N1); if Present (Assoc1) then Act1 := First (Assoc1); else Act1 := Empty; Set_Generic_Associations (N1, New_List); Assoc1 := Generic_Associations (N1); end if; if Present (Assoc2) then Act2 := First (Assoc2); else return; end if; while Present (Act1) and then Present (Act2) loop Next (Act1); Next (Act2); end loop; -- Find the associations added for default subprograms if Present (Act2) then while Nkind (Act2) /= N_Generic_Association or else No (Entity (Selector_Name (Act2))) or else not Is_Overloadable (Entity (Selector_Name (Act2))) loop Next (Act2); end loop; -- Add a similar association if the default is global. The -- renaming declaration for the actual has been analyzed, and -- its alias is the program it renames. Link the actual in the -- original generic tree with the node in the analyzed tree. while Present (Act2) loop Subp := Entity (Selector_Name (Act2)); Def := Explicit_Generic_Actual_Parameter (Act2); -- Following test is defence against rubbish errors if No (Alias (Subp)) then return; end if; -- Retrieve the resolved actual from the renaming declaration -- created for the instantiated formal. Actual := Entity (Name (Parent (Parent (Subp)))); Set_Entity (Def, Actual); Set_Etype (Def, Etype (Actual)); if Is_Global (Actual) then Ndec := Make_Generic_Association (Loc, Selector_Name => New_Occurrence_Of (Subp, Loc), Explicit_Generic_Actual_Parameter => New_Occurrence_Of (Actual, Loc)); Set_Associated_Node (Explicit_Generic_Actual_Parameter (Ndec), Def); Append (Ndec, Assoc1); -- If there are other defaults, add a dummy association in case -- there are other defaulted formals with the same name. elsif Present (Next (Act2)) then Ndec := Make_Generic_Association (Loc, Selector_Name => New_Occurrence_Of (Subp, Loc), Explicit_Generic_Actual_Parameter => Empty); Append (Ndec, Assoc1); end if; Next (Act2); end loop; end if; if Nkind (Name (N1)) = N_Identifier and then Is_Child_Unit (Gen_Id) and then Is_Global (Gen_Id) and then Is_Generic_Unit (Scope (Gen_Id)) and then In_Open_Scopes (Scope (Gen_Id)) then -- This is an instantiation of a child unit within a sibling, so -- that the generic parent is in scope. An eventual instance must -- occur within the scope of an instance of the parent. Make name -- in instance into an expanded name, to preserve the identifier -- of the parent, so it can be resolved subsequently. Rewrite (Name (N2), Make_Expanded_Name (Loc, Chars => Chars (Gen_Id), Prefix => New_Occurrence_Of (Scope (Gen_Id), Loc), Selector_Name => New_Occurrence_Of (Gen_Id, Loc))); Set_Entity (Name (N2), Gen_Id); Rewrite (Name (N1), Make_Expanded_Name (Loc, Chars => Chars (Gen_Id), Prefix => New_Occurrence_Of (Scope (Gen_Id), Loc), Selector_Name => New_Occurrence_Of (Gen_Id, Loc))); Set_Associated_Node (Name (N1), Name (N2)); Set_Associated_Node (Prefix (Name (N1)), Empty); Set_Associated_Node (Selector_Name (Name (N1)), Selector_Name (Name (N2))); Set_Etype (Name (N1), Etype (Gen_Id)); end if; end Save_Global_Defaults; ---------------------------- -- Save_Global_Descendant -- ---------------------------- procedure Save_Global_Descendant (D : Union_Id) is N1 : Node_Id; begin if D in Node_Range then if D = Union_Id (Empty) then null; elsif Nkind (Node_Id (D)) /= N_Compilation_Unit then Save_References (Node_Id (D)); end if; elsif D in List_Range then if D = Union_Id (No_List) or else Is_Empty_List (List_Id (D)) then null; else N1 := First (List_Id (D)); while Present (N1) loop Save_References (N1); Next (N1); end loop; end if; -- Element list or other non-node field, nothing to do else null; end if; end Save_Global_Descendant; --------------------- -- Save_References -- --------------------- -- This is the recursive procedure that does the work once the enclosing -- generic scope has been established. We have to treat specially a -- number of node rewritings that are required by semantic processing -- and which change the kind of nodes in the generic copy: typically -- constant-folding, replacing an operator node by a string literal, or -- a selected component by an expanded name. In each of those cases, the -- transformation is propagated to the generic unit. procedure Save_References (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); begin if N = Empty then null; elsif Nkind_In (N, N_Character_Literal, N_Operator_Symbol) then if Nkind (N) = Nkind (Get_Associated_Node (N)) then Reset_Entity (N); elsif Nkind (N) = N_Operator_Symbol and then Nkind (Get_Associated_Node (N)) = N_String_Literal then Change_Operator_Symbol_To_String_Literal (N); end if; elsif Nkind (N) in N_Op then if Nkind (N) = Nkind (Get_Associated_Node (N)) then if Nkind (N) = N_Op_Concat then Set_Is_Component_Left_Opnd (N, Is_Component_Left_Opnd (Get_Associated_Node (N))); Set_Is_Component_Right_Opnd (N, Is_Component_Right_Opnd (Get_Associated_Node (N))); end if; Reset_Entity (N); else -- Node may be transformed into call to a user-defined operator N2 := Get_Associated_Node (N); if Nkind (N2) = N_Function_Call then E := Entity (Name (N2)); if Present (E) and then Is_Global (E) then Set_Etype (N, Etype (N2)); else Set_Associated_Node (N, Empty); Set_Etype (N, Empty); end if; elsif Nkind_In (N2, N_Integer_Literal, N_Real_Literal, N_String_Literal) then if Present (Original_Node (N2)) and then Nkind (Original_Node (N2)) = Nkind (N) then -- Operation was constant-folded. Whenever possible, -- recover semantic information from unfolded node, -- for ASIS use. Set_Associated_Node (N, Original_Node (N2)); if Nkind (N) = N_Op_Concat then Set_Is_Component_Left_Opnd (N, Is_Component_Left_Opnd (Get_Associated_Node (N))); Set_Is_Component_Right_Opnd (N, Is_Component_Right_Opnd (Get_Associated_Node (N))); end if; Reset_Entity (N); else -- If original node is already modified, propagate -- constant-folding to template. Rewrite (N, New_Copy (N2)); Set_Analyzed (N, False); end if; elsif Nkind (N2) = N_Identifier and then Ekind (Entity (N2)) = E_Enumeration_Literal then -- Same if call was folded into a literal, but in this case -- retain the entity to avoid spurious ambiguities if it is -- overloaded at the point of instantiation or inlining. Rewrite (N, New_Copy (N2)); Set_Analyzed (N, False); end if; end if; -- Complete operands check if node has not been constant-folded if Nkind (N) in N_Op then Save_Entity_Descendants (N); end if; elsif Nkind (N) = N_Identifier then if Nkind (N) = Nkind (Get_Associated_Node (N)) then -- If this is a discriminant reference, always save it. It is -- used in the instance to find the corresponding discriminant -- positionally rather than by name. Set_Original_Discriminant (N, Original_Discriminant (Get_Associated_Node (N))); Reset_Entity (N); else N2 := Get_Associated_Node (N); if Nkind (N2) = N_Function_Call then E := Entity (Name (N2)); -- Name resolves to a call to parameterless function. If -- original entity is global, mark node as resolved. if Present (E) and then Is_Global (E) then Set_Etype (N, Etype (N2)); else Set_Associated_Node (N, Empty); Set_Etype (N, Empty); end if; elsif Nkind_In (N2, N_Integer_Literal, N_Real_Literal) and then Is_Entity_Name (Original_Node (N2)) then -- Name resolves to named number that is constant-folded, -- We must preserve the original name for ASIS use, and -- undo the constant-folding, which will be repeated in -- each instance. Set_Associated_Node (N, Original_Node (N2)); Reset_Entity (N); elsif Nkind (N2) = N_String_Literal then -- Name resolves to string literal. Perform the same -- replacement in generic. Rewrite (N, New_Copy (N2)); elsif Nkind (N2) = N_Explicit_Dereference then -- An identifier is rewritten as a dereference if it is the -- prefix in an implicit dereference (call or attribute). -- The analysis of an instantiation will expand the node -- again, so we preserve the original tree but link it to -- the resolved entity in case it is global. if Is_Entity_Name (Prefix (N2)) and then Present (Entity (Prefix (N2))) and then Is_Global (Entity (Prefix (N2))) then Set_Associated_Node (N, Prefix (N2)); elsif Nkind (Prefix (N2)) = N_Function_Call and then Is_Global (Entity (Name (Prefix (N2)))) then Rewrite (N, Make_Explicit_Dereference (Loc, Prefix => Make_Function_Call (Loc, Name => New_Occurrence_Of (Entity (Name (Prefix (N2))), Loc)))); else Set_Associated_Node (N, Empty); Set_Etype (N, Empty); end if; -- The subtype mark of a nominally unconstrained object is -- rewritten as a subtype indication using the bounds of the -- expression. Recover the original subtype mark. elsif Nkind (N2) = N_Subtype_Indication and then Is_Entity_Name (Original_Node (N2)) then Set_Associated_Node (N, Original_Node (N2)); Reset_Entity (N); else null; end if; end if; elsif Nkind (N) in N_Entity then null; else declare Qual : Node_Id := Empty; Typ : Entity_Id := Empty; Nam : Node_Id; use Atree.Unchecked_Access; -- This code section is part of implementing an untyped tree -- traversal, so it needs direct access to node fields. begin if Nkind_In (N, N_Aggregate, N_Extension_Aggregate) then N2 := Get_Associated_Node (N); if No (N2) then Typ := Empty; else Typ := Etype (N2); -- In an instance within a generic, use the name of the -- actual and not the original generic parameter. If the -- actual is global in the current generic it must be -- preserved for its instantiation. if Nkind (Parent (Typ)) = N_Subtype_Declaration and then Present (Generic_Parent_Type (Parent (Typ))) then Typ := Base_Type (Typ); Set_Etype (N2, Typ); end if; end if; if No (N2) or else No (Typ) or else not Is_Global (Typ) then Set_Associated_Node (N, Empty); -- If the aggregate is an actual in a call, it has been -- resolved in the current context, to some local type. -- The enclosing call may have been disambiguated by the -- aggregate, and this disambiguation might fail at -- instantiation time because the type to which the -- aggregate did resolve is not preserved. In order to -- preserve some of this information, we wrap the -- aggregate in a qualified expression, using the id of -- its type. For further disambiguation we qualify the -- type name with its scope (if visible) because both -- id's will have corresponding entities in an instance. -- This resolves most of the problems with missing type -- information on aggregates in instances. if Nkind (N2) = Nkind (N) and then Nkind_In (Parent (N2), N_Procedure_Call_Statement, N_Function_Call) and then Comes_From_Source (Typ) then if Is_Immediately_Visible (Scope (Typ)) then Nam := Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Chars (Scope (Typ))), Selector_Name => Make_Identifier (Loc, Chars (Typ))); else Nam := Make_Identifier (Loc, Chars (Typ)); end if; Qual := Make_Qualified_Expression (Loc, Subtype_Mark => Nam, Expression => Relocate_Node (N)); end if; end if; Save_Global_Descendant (Field1 (N)); Save_Global_Descendant (Field2 (N)); Save_Global_Descendant (Field3 (N)); Save_Global_Descendant (Field5 (N)); if Present (Qual) then Rewrite (N, Qual); end if; -- All other cases than aggregates else Save_Global_Descendant (Field1 (N)); Save_Global_Descendant (Field2 (N)); Save_Global_Descendant (Field3 (N)); Save_Global_Descendant (Field4 (N)); Save_Global_Descendant (Field5 (N)); end if; end; end if; -- If a node has aspects, references within their expressions must -- be saved separately, given that they are not directly in the -- tree. if Has_Aspects (N) then declare Aspect : Node_Id; begin Aspect := First (Aspect_Specifications (N)); while Present (Aspect) loop Save_Global_References (Expression (Aspect)); Next (Aspect); end loop; end; end if; end Save_References; -- Start of processing for Save_Global_References begin Gen_Scope := Current_Scope; -- If the generic unit is a child unit, references to entities in the -- parent are treated as local, because they will be resolved anew in -- the context of the instance of the parent. while Is_Child_Unit (Gen_Scope) and then Ekind (Scope (Gen_Scope)) = E_Generic_Package loop Gen_Scope := Scope (Gen_Scope); end loop; Save_References (N); end Save_Global_References; -------------------------------------- -- Set_Copied_Sloc_For_Inlined_Body -- -------------------------------------- procedure Set_Copied_Sloc_For_Inlined_Body (N : Node_Id; E : Entity_Id) is begin Create_Instantiation_Source (N, E, True, S_Adjustment); end Set_Copied_Sloc_For_Inlined_Body; --------------------- -- Set_Instance_Of -- --------------------- procedure Set_Instance_Of (A : Entity_Id; B : Entity_Id) is begin Generic_Renamings.Table (Generic_Renamings.Last) := (A, B, Assoc_Null); Generic_Renamings_HTable.Set (Generic_Renamings.Last); Generic_Renamings.Increment_Last; end Set_Instance_Of; -------------------- -- Set_Next_Assoc -- -------------------- procedure Set_Next_Assoc (E : Assoc_Ptr; Next : Assoc_Ptr) is begin Generic_Renamings.Table (E).Next_In_HTable := Next; end Set_Next_Assoc; ------------------- -- Start_Generic -- ------------------- procedure Start_Generic is begin -- ??? More things could be factored out in this routine. -- Should probably be done at a later stage. Generic_Flags.Append (Inside_A_Generic); Inside_A_Generic := True; Expander_Mode_Save_And_Set (False); end Start_Generic; ---------------------- -- Set_Instance_Env -- ---------------------- procedure Set_Instance_Env (Gen_Unit : Entity_Id; Act_Unit : Entity_Id) is begin -- Regardless of the current mode, predefined units are analyzed in the -- most current Ada mode, and earlier version Ada checks do not apply -- to predefined units. Nothing needs to be done for non-internal units. -- These are always analyzed in the current mode. if Is_Internal_File_Name (Fname => Unit_File_Name (Get_Source_Unit (Gen_Unit)), Renamings_Included => True) then Set_Opt_Config_Switches (True, Current_Sem_Unit = Main_Unit); end if; Current_Instantiated_Parent := (Gen_Id => Gen_Unit, Act_Id => Act_Unit, Next_In_HTable => Assoc_Null); end Set_Instance_Env; ----------------- -- Switch_View -- ----------------- procedure Switch_View (T : Entity_Id) is BT : constant Entity_Id := Base_Type (T); Priv_Elmt : Elmt_Id := No_Elmt; Priv_Sub : Entity_Id; begin -- T may be private but its base type may have been exchanged through -- some other occurrence, in which case there is nothing to switch -- besides T itself. Note that a private dependent subtype of a private -- type might not have been switched even if the base type has been, -- because of the last branch of Check_Private_View (see comment there). if not Is_Private_Type (BT) then Prepend_Elmt (Full_View (T), Exchanged_Views); Exchange_Declarations (T); return; end if; Priv_Elmt := First_Elmt (Private_Dependents (BT)); if Present (Full_View (BT)) then Prepend_Elmt (Full_View (BT), Exchanged_Views); Exchange_Declarations (BT); end if; while Present (Priv_Elmt) loop Priv_Sub := (Node (Priv_Elmt)); -- We avoid flipping the subtype if the Etype of its full view is -- private because this would result in a malformed subtype. This -- occurs when the Etype of the subtype full view is the full view of -- the base type (and since the base types were just switched, the -- subtype is pointing to the wrong view). This is currently the case -- for tagged record types, access types (maybe more?) and needs to -- be resolved. ??? if Present (Full_View (Priv_Sub)) and then not Is_Private_Type (Etype (Full_View (Priv_Sub))) then Prepend_Elmt (Full_View (Priv_Sub), Exchanged_Views); Exchange_Declarations (Priv_Sub); end if; Next_Elmt (Priv_Elmt); end loop; end Switch_View; ----------------- -- True_Parent -- ----------------- function True_Parent (N : Node_Id) return Node_Id is begin if Nkind (Parent (N)) = N_Subunit then return Parent (Corresponding_Stub (Parent (N))); else return Parent (N); end if; end True_Parent; ----------------------------- -- Valid_Default_Attribute -- ----------------------------- procedure Valid_Default_Attribute (Nam : Entity_Id; Def : Node_Id) is Attr_Id : constant Attribute_Id := Get_Attribute_Id (Attribute_Name (Def)); T : constant Entity_Id := Entity (Prefix (Def)); Is_Fun : constant Boolean := (Ekind (Nam) = E_Function); F : Entity_Id; Num_F : Int; OK : Boolean; begin if No (T) or else T = Any_Id then return; end if; Num_F := 0; F := First_Formal (Nam); while Present (F) loop Num_F := Num_F + 1; Next_Formal (F); end loop; case Attr_Id is when Attribute_Adjacent | Attribute_Ceiling | Attribute_Copy_Sign | Attribute_Floor | Attribute_Fraction | Attribute_Machine | Attribute_Model | Attribute_Remainder | Attribute_Rounding | Attribute_Unbiased_Rounding => OK := Is_Fun and then Num_F = 1 and then Is_Floating_Point_Type (T); when Attribute_Image | Attribute_Pred | Attribute_Succ | Attribute_Value | Attribute_Wide_Image | Attribute_Wide_Value => OK := (Is_Fun and then Num_F = 1 and then Is_Scalar_Type (T)); when Attribute_Max | Attribute_Min => OK := (Is_Fun and then Num_F = 2 and then Is_Scalar_Type (T)); when Attribute_Input => OK := (Is_Fun and then Num_F = 1); when Attribute_Output | Attribute_Read | Attribute_Write => OK := (not Is_Fun and then Num_F = 2); when others => OK := False; end case; if not OK then Error_Msg_N ("attribute reference has wrong profile for subprogram", Def); end if; end Valid_Default_Attribute; end Sem_Ch12;
Go to most recent revision | Compare with Previous | Blame | View Log