URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [vms_data.ads] - Rev 717
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- V M S _ D A T A -- -- -- -- S p e c -- -- -- -- Copyright (C) 1996-2011, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- This package contains, for each of the command of the GNAT driver, one -- constant array; each component of this array is a string that defines, -- in coded form as explained below, the conversion of a VMS qualifier of the -- command to the corresponding switch of the GNAT tool corresponding to the -- command. -- This package is used by the GNAT driver to invokes the GNAT tools with the -- switches corresponding to the VMS qualifier and by the Project Manager to -- convert VMS qualifiers in project files to their corresponding switch -- values. -- This package is also an input to the tool that generates the VMS GNAT -- help information automatically. -- NOTE: the format of this package must follow the following rules, so that -- the VMS GNAT help tool works properly: -- - Each command zone (where the eventual qualifiers are declared) must -- begin with a boxed comment of the form: -- --------------------------------- -- -- Switches for GNAT <COMMAND> -- -- --------------------------------- -- where <COMMAND> is the name of a GNAT command in capital letters, for -- example BIND, COMPILE, XREF, ... -- - each qualifier declaration must be followed either by -- - a comment starting with "-- NODOC", to indicate that there is -- no documentation for this qualifier, or -- - a contiguous sequence of comments that constitute the -- documentation of the qualifier. -- - each command zone ends with the declaration of the constant array -- for the command, of the form: -- <Command>__Switches : aliased constant Switches := package VMS_Data is ---------------- -- QUALIFIERS -- ---------------- -- The syntax of a qualifier declaration is as follows: -- SWITCH_STRING ::= "/ command-qualifier-name TRANSLATION" -- TRANSLATION ::= -- DIRECT_TRANSLATION -- | DIRECTORIES_TRANSLATION -- | FILE_TRANSLATION -- | NO_SPACE_FILE_TRANSL -- | NUMERIC_TRANSLATION -- | STRING_TRANSLATION -- | OPTIONS_TRANSLATION -- | COMMANDS_TRANSLATION -- | ALPHANUMPLUS_TRANSLATION -- | OTHER_TRANSLATION -- DIRECT_TRANSLATION ::= space UNIX_SWITCHES -- DIRECTORIES_TRANSLATION ::= =* UNIX_SWITCH * -- DIRECTORY_TRANSLATION ::= =% UNIX_SWITCH % -- FILE_TRANSLATION ::= =@ UNIX_SWITCH @ -- NO_SPACE_FILE_TRANSL ::= =< UNIX_SWITCH > -- NUMERIC_TRANSLATION ::= =# UNIX_SWITCH # | # number # -- STRING_TRANSLATION ::= =" UNIX_SWITCH " -- OPTIONS_TRANSLATION ::= =OPTION {space OPTION} -- COMMANDS_TRANSLATION ::= =? ARGS space command-name -- ALPHANUMPLUS_TRANSLATION ::= =| UNIX_SWITCH | -- UNIX_SWITCHES ::= UNIX_SWITCH {, UNIX_SWITCH} -- UNIX_SWITCH ::= unix-switch-string | !unix-switch-string | `string' -- OPTION ::= option-name space UNIX_SWITCHES -- ARGS ::= -cargs | -bargs | -largs -- Here command-qual is the name of the switch recognized by the GNATCmd. -- This is always given in upper case in the templates, although in the -- actual commands, either upper or lower case is allowed. -- The unix-switch-string always starts with a minus, and has no commas -- or spaces in it. Case is significant in the unix switch string. If a -- unix switch string is preceded by the not sign (!) it means that the -- effect of the corresponding command qualifier is to remove any previous -- occurrence of the given switch in the command line. -- The DIRECTORIES_TRANSLATION format is used where a list of directories -- is given. This possible corresponding formats recognized by GNATCmd are -- as shown by the following example for the case of PATH -- PATH=direc -- PATH=(direc,direc,direc,direc) -- When more than one directory is present for the DIRECTORIES case, then -- multiple instances of the corresponding unix switch are generated, -- with the file name being substituted for the occurrence of *. -- The FILE_TRANSLATION format is similar except that only a single -- file is allowed, not a list of files, and only one unix switch is -- generated as a result. -- the NO_SPACE_FILE_TRANSL is similar to FILE_TRANSLATION, except that -- no space is inserted between the switch and the file name. -- The NUMERIC_TRANSLATION format is similar to the FILE_TRANSLATION case -- except that the parameter is a decimal integer in the range 0 to 999999. -- For the OPTIONS_TRANSLATION case, GNATCmd similarly permits one or -- more options to appear (although only in some cases does the use of -- multiple options make logical sense). For example, taking the -- case of ERRORS for GCC, the following are all allowed: -- /ERRORS=BRIEF -- /ERRORS=(FULL,VERBOSE) -- /ERRORS=(BRIEF IMMEDIATE) -- If no option is provided (e.g. just /ERRORS is written), then the -- first option in the list is the default option. For /ERRORS this -- is NORMAL, so /ERRORS with no option is equivalent to /ERRORS=NORMAL. -- The COMMANDS_TRANSLATION case is only used for gnatmake, to correspond -- to the use of -cargs, -bargs and -largs (the ARGS string as indicated -- is one of these three possibilities). The name given by COMMAND is the -- corresponding command name to be used to interpret the switches to be -- passed on. Switches of this type set modes, e.g. /COMPILER_QUALIFIERS -- sets the mode so that all subsequent switches, up to another switch -- with COMMANDS_TRANSLATION apply to the corresponding commands issued -- by the make utility. For example -- /COMPILER_QUALIFIERS /LIST /BINDER_QUALIFIERS /MAIN -- /COMPILER_QUALIFIERS /NOLIST /COMPILE_CHECKS=SYNTAX -- Clearly these switches must come at the end of the list of switches -- since all subsequent switches apply to an issued command. -- For the DIRECT_TRANSLATION case, an implicit additional qualifier -- declaration is created by prepending NO to the name of the qualifier, -- and then inverting the sense of the UNIX_SWITCHES string. For example, -- given the qualifier definition: -- "/LIST -gnatl" -- An implicit qualifier definition is created: -- "/NOLIST !-gnatl" -- In the case where, a ! is already present, inverting the sense of the -- switch means removing it. subtype S is String; -- A synonym to shorten the table type String_Ptr is access constant String; -- String pointer type used throughout type Switches is array (Natural range <>) of String_Ptr; -- Type used for array of switches type Switches_Ptr is access constant Switches; ---------------------------- -- Switches for GNAT BIND -- ---------------------------- S_Bind_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Bind_ALI : aliased constant S := "/ALI_LIST " & "-A"; -- /NOALI_LIST (D) -- /ALI_LIST -- -- Output full names of all the ALI files in the partition. The output is -- written to SYS$OUTPUT. S_Bind_Bind : aliased constant S := "/BIND_FILE=" & "ADA " & "-A " & "C " & "-C"; -- /BIND_FILE[=bind-file-option] -- -- Specifies the language of the binder generated file. -- -- ADA (D) Binder file is Ada. -- -- C Binder file is 'C'. S_Bind_Build : aliased constant S := "/BUILD_LIBRARY=|" & "-L|"; -- /BUILD_LIBRARY=xxx -- -- Binds the units for library building. In this case the adainit and -- adafinal procedures are rename to xxxinit and xxxfinal. Implies -- /NOMAIN. S_Bind_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- /NOCURRENT_DIRECTORY -- -- Look for source, library or object files in the default directory. S_Bind_Debug : aliased constant S := "/DEBUG=" & "TRACEBACK " & "-g2 " & "ALL " & "-g3 " & "NONE " & "-g0 " & "SYMBOLS " & "-g1 " & "NOSYMBOLS " & "!-g1 " & "LINK " & "-g3 " & "NOTRACEBACK " & "!-g2"; -- /DEBUG[=debug-level] -- /NODEBUG -- -- Specify level of debugging information generated for the elaboration -- routine. See corresponding qualifier for GNAT COMPILE. S_Bind_DebugX : aliased constant S := "/NODEBUG " & "!-g"; -- NODOC (see /DEBUG) S_Bind_Elab : aliased constant S := "/ELABORATION_DEPENDENCIES " & "-e"; -- /ELABORATION_DEPENDENCIES -- /NOELABORATION_DEPENDENCIES (D) -- -- Output complete list of elaboration-order dependencies, showing the -- reason for each dependency. This output can be rather extensive but may -- be useful in diagnosing problems with elaboration order. The output is -- written to SYS$OUTPUT. S_Bind_Error : aliased constant S := "/ERROR_LIMIT=#" & "-m#"; -- /ERROR_LIMIT=nnn -- -- Limit number of detected errors to nnn (1-999999). S_Bind_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Bind_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Bind_Force : aliased constant S := "/FORCE_ELAB_FLAGS " & "-F"; -- /NOFORCE_ELAB_FLAGS (D) -- /FORCE_ELAB_FLAGS -- -- Force checking of elaboration Flags S_Bind_Help : aliased constant S := "/HELP " & "-h"; -- /HELP -- -- Output usage information. S_Bind_Init : aliased constant S := "/INITIALIZE_SCALARS=" & "INVALID " & "-Sin " & "LOW " & "-Slo " & "HIGH " & "-Shi"; -- /INITIALIZE_SCALARS[=scalar-option] -- -- Indicate how uninitialized scalar values for which a pragma -- Initialize_Scalars applies should be initialized. -- scalar-option may be one of the following: -- -- INVALID (D) Initialize with an invalid value. -- LOW Initialize with the lowest valid value of the subtype. -- HIGH Initialize with the highest valid value of the subtype. S_Bind_Leap : aliased constant S := "/ENABLE_LEAP_SECONDS " & "-y"; -- /ENABLE_LEAP_SECONDS -- /NOENABLE_LEAP_SECONDS (D) -- -- Enable leap seconds support in Ada.Calendar and its children. S_Bind_Library : aliased constant S := "/LIBRARY_SEARCH=*" & "-aO*"; -- /LIBRARY_SEARCH=(direc[,...]) -- -- When looking for library and object files look also in directories -- specified. S_Bind_Linker : aliased constant S := "/LINKER_OPTION_LIST " & "-K"; -- /NOLINKER_OPTION_LIST (D) -- /LINKER_OPTION_LIST -- -- Output linker options to SYS$OUTPUT. Includes library search -- paths, contents of pragmas Ident and Linker_Options, and -- libraries added by GNAT BIND. S_Bind_Main : aliased constant S := "/MAIN " & "!-n"; -- /MAIN (D) -- -- The main program is in Ada. -- -- /NOMAIN -- -- The main program is not in Ada. S_Bind_Alloc32 : aliased constant S := "/32_MALLOC " & "-H32"; -- /32_MALLOC -- -- Use 32-bit allocations for `__gnat_malloc' (and thus for -- access types). S_Bind_Alloc64 : aliased constant S := "/64_MALLOC " & "-H64"; -- /64_MALLOC -- -- Use 64-bit allocations for `__gnat_malloc' (and thus for -- access types). S_Bind_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Bind_Nostinc : aliased constant S := "/NOSTD_INCLUDES " & "-nostdinc"; -- /NOSTD_INCLUDES -- -- Do not look for sources the in the system default directory. S_Bind_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " & "-nostdlib"; -- /NOSTD_LIBRARIES -- -- Do not look for library files in the system default directory. S_Bind_No_Time : aliased constant S := "/NO_TIME_STAMP_CHECK " & "-t"; -- NODOC (see /TIME_STAMP_CHECK) S_Bind_Object : aliased constant S := "/OBJECT_LIST " & "-O"; -- /NOOBJECT_LIST (D) -- /OBJECT_LIST -- -- Output full names of all the object files that must be linked to -- provide the Ada component of the program. The output is written to -- SYS$OUTPUT. S_Bind_Order : aliased constant S := "/ORDER_OF_ELABORATION " & "-l"; -- /NOORDER_OF_ELABORATION (D) -- /ORDER_OF_ELABORATION -- -- Output chosen elaboration order. The output is written to SYS$OUTPUT. S_Bind_Output : aliased constant S := "/OUTPUT=@" & "-o@"; -- /OUTPUT=filename -- -- File name to use for the program containing the elaboration code. S_Bind_OutputX : aliased constant S := "/NOOUTPUT " & "-c"; -- /NOOUTPUT -- -- Check only. Do not generate the binder output file. -- -- In this mode the binder performs all error checks but does not generate -- an output file. S_Bind_Pess : aliased constant S := "/PESSIMISTIC_ELABORATION " & "-p"; -- /PESSIMISTIC_ELABORATION -- -- Causes the binder to choose a "pessimistic" elaboration order, i.e. one -- which is most likely to cause elaboration order problems. This can be -- useful in testing portable code to make sure that there are no missing -- elaborate pragmas. S_Bind_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- binder. The source and object directories to be searched will be -- communicated to the binder through logical names ADA_PRJ_INCLUDE_FILE -- and ADA_PRJ_OBJECTS_FILE. S_Bind_Read : aliased constant S := "/READ_SOURCES=" & "ALL " & "-s " & "NONE " & "-x " & "AVAILABLE " & "!-x,!-s"; -- /READ_SOURCES[=(keyword[,...])] -- /NOREAD_SOURCES -- -- The following keyword are accepted: -- -- ALL (D) Require source files to be present. In this mode, the -- binder insists on being able to locate all source files -- that are referenced and checks their consistency. In -- normal mode, if a source file cannot be located it is -- simply ignored. If you specify the ALL keyword, a -- missing source file is an error. -- -- NONE Exclude source files. In this mode, the binder only -- checks that ALI files are consistent with one another. -- source files are not accessed. The binder runs faster -- in this mode, and there is still a guarantee that the -- resulting program is self-consistent. -- -- If a source file has been edited since it was last -- compiled and you specify the NONE keyword, the binder -- will not detect that the object file is out of date -- with the source file. -- -- This is the same as specifying /NOREAD_SOURCES. -- -- AVAILABLE Check that object files are consistent with one -- another and are consistent with any source files that -- can be located. S_Bind_ReadX : aliased constant S := "/NOREAD_SOURCES " & "-x"; -- NODOC (see /READ_SOURCES) S_Bind_Rename : aliased constant S := "/RENAME_MAIN=<" & "-M>"; -- /RENAME_MAIN=xxx -- -- Renames the generated main program from main to xxx. -- This is useful in the case of some cross-building environments, where -- the actual main program is separate from the one generated -- by GNAT BIND. S_Bind_Report : aliased constant S := "/REPORT_ERRORS=" & "VERBOSE " & "-v " & "BRIEF " & "-b " & "DEFAULT " & "!-b,!-v"; -- /REPORT_ERRORS[=(keyword[,...])] -- VERBOSE (D) -- BRIEF -- DEFAULT -- /NOREPORT_ERRORS -- -- With the DEFAULT keyword (which is not the default when the binder is -- run from GNAT BIND) or the /NOREPORT_ERRORS qualifier, brief error -- messages are generated to SYS$ERROR. If the VERBOSE keyword is -- present, a header is written to SYS$OUTPUT and any error messages are -- directed to SYS$OUTPUT All that is written to SYS$ERROR is a brief -- summary message. -- -- If the BRIEF keyword is specified, the binder will generate brief error -- messages to SYS$ERROR even if verbose mode is specified. This is -- relevant only when used together with the VERBOSE keyword or /VERBOSE -- qualifier. S_Bind_ReportX : aliased constant S := "/NOREPORT_ERRORS " & "!-b,!-v"; -- NODOC (see /REPORT_ERRORS) S_Bind_Restr : aliased constant S := "/RESTRICTION_LIST " & "-r"; -- /NORESTRICTION_LIST (D) -- /RESTRICTION_LIST -- -- Generate list of pragma Restrictions that could be applied to the -- current unit. This is useful for code audit purposes, and also may be -- used to improve code generation in some cases. S_Bind_Return : aliased constant S := "/RETURN_CODES=" & "POSIX " & "!-X1 " & "VMS " & "-X1"; -- /RETURN_CODES=POSIX (D) -- /RETURN_CODES=VMS -- -- Specifies the style of default exit code returned. Must be used in -- conjunction with and match the Link qualifier with same name. -- -- POSIX (D) Return Posix success (0) by default. -- -- VMS Return VMS success (1) by default. S_Bind_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" & "--RTS=|"; -- /RUNTIME_SYSTEM=xxx -- -- Binds against an alternate runtime system named xxx or RTS-xxx. S_Bind_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory[,...]) -- -- When looking for source or object files also look in directories -- specified. -- -- This is the same as specifying both /LIBRARY_SEARCH and /SOURCE_SEARCH -- for a directory. S_Bind_Shared : aliased constant S := "/SHARED " & "-shared,!-static"; -- /SHARED -- /NOSHARED -- -- Link against a shared GNAT run time when available. S_Bind_Slice : aliased constant S := "/TIME_SLICE=#" & "-T#"; -- /TIME_SLICE=nnn -- -- Set the time slice value to nnn milliseconds. A value of zero means no -- time slicing and also indicates to the tasking run time to match as -- close as possible to the annex D requirements of the RM. S_Bind_Source : aliased constant S := "/SOURCE_SEARCH=*" & "-aI*"; -- /SOURCE_SEARCH=(directory[,...]) -- -- When looking for source files also look in directories specified. S_Bind_Static : aliased constant S := "/STATIC " & "-static,!-shared"; -- /STATIC -- /NOSTATIC -- -- Link against a static GNAT run time. S_Bind_Store : aliased constant S := "/STORE_TRACEBACKS " & "-E"; -- /STORE_TRACEBACKS (D) -- /NOSTORE_TRACEBACKS -- -- Store tracebacks in exception occurrences. -- This is the default on VMS, with the zero-cost exception mechanism. -- This qualifier has no impact, except when using the setjmp/longjmp -- exception mechanism, with the GNAT COMPILE qualifier /LONGJMP_SETJMP. S_Bind_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Bind_Time : aliased constant S := "/TIME_STAMP_CHECK " & "!-t"; -- /TIME_STAMP_CHECK (D) -- -- Time stamp errors will be treated as errors. -- -- /NOTIME_STAMP_CHECK -- -- Ignore time stamp errors. Any time stamp error messages are treated as -- warning messages. This switch essentially disconnects the normal -- consistency checking, and the resulting program may have undefined -- semantics if inconsistent units are present. -- -- This means that /NOTIME_STAMP_CHECK should be used only in unusual -- situations, with extreme care. S_Bind_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /VERBOSE (D) -- /NOVERBOSE -- -- Equivalent to /REPORT_ERRORS=VERBOSE. S_Bind_Warn : aliased constant S := "/WARNINGS=" & "NORMAL " & "!-ws,!-we " & "SUPPRESS " & "-ws " & "ERROR " & "-we"; -- /WARNINGS[=(keyword[,...])] -- /NOWARNINGS -- -- The following keywords are supported: -- -- NORMAL (D) Print warning messages and treat them as warning. -- SUPPRESS Suppress all warning messages (same as /NOWARNINGS). -- ERROR Treat any warning messages as fatal errors S_Bind_WarnX : aliased constant S := "/NOWARNINGS " & "-ws"; -- NODOC (see /WARNINGS) S_Bind_Wide : aliased constant S := "/WIDE_CHARACTER_ENCODING=" & "BRACKETS " & "-gnatWb " & "HEX " & "-gnatWh " & "UPPER " & "-gnatWu " & "SHIFT_JIS " & "-gnatWs " & "UTF8 " & "-gnatW8 " & "EUC " & "-gnatWe"; -- /NOWIDE_CHARACTER_ENCODING (D) -- /WIDE_CHARACTER_ENCODING[=encode-type] -- -- Specifies the mechanism used to encode wide characters, overriding -- the default as set by the /WIDE_CHARACTER_ENCODING option for the -- compilation of the main program. S_Bind_Zero : aliased constant S := "/ZERO_MAIN " & "-z"; -- /NOZERO_MAIN (D) -- /ZERO_MAIN -- -- Normally the binder checks that the unit name given on the command line -- corresponds to a suitable main subprogram. When /ZERO_MAIN is used, -- a list of ALI files can be given, and the execution of the program -- consists of elaboration of these units in an appropriate order. Bind_Switches : aliased constant Switches := (S_Bind_Add 'Access, S_Bind_ALI 'Access, S_Bind_Bind 'Access, S_Bind_Build 'Access, S_Bind_Current 'Access, S_Bind_Debug 'Access, S_Bind_DebugX 'Access, S_Bind_Elab 'Access, S_Bind_Error 'Access, S_Bind_Ext 'Access, S_Bind_Follow 'Access, S_Bind_Force 'Access, S_Bind_Help 'Access, S_Bind_Init 'Access, S_Bind_Leap 'Access, S_Bind_Library 'Access, S_Bind_Linker 'Access, S_Bind_Main 'Access, S_Bind_Alloc32 'Access, S_Bind_Alloc64 'Access, S_Bind_Mess 'Access, S_Bind_Nostinc 'Access, S_Bind_Nostlib 'Access, S_Bind_No_Time 'Access, S_Bind_Object 'Access, S_Bind_Order 'Access, S_Bind_Output 'Access, S_Bind_OutputX 'Access, S_Bind_Pess 'Access, S_Bind_Project 'Access, S_Bind_Read 'Access, S_Bind_ReadX 'Access, S_Bind_Rename 'Access, S_Bind_Report 'Access, S_Bind_ReportX 'Access, S_Bind_Restr 'Access, S_Bind_Return 'Access, S_Bind_RTS 'Access, S_Bind_Search 'Access, S_Bind_Shared 'Access, S_Bind_Slice 'Access, S_Bind_Source 'Access, S_Bind_Static 'Access, S_Bind_Store 'Access, S_Bind_Subdirs 'Access, S_Bind_Time 'Access, S_Bind_Verbose 'Access, S_Bind_Warn 'Access, S_Bind_WarnX 'Access, S_Bind_Wide 'Access, S_Bind_Zero 'Access); ----------------------------- -- Switches for GNAT CHECK -- ----------------------------- S_Check_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Check_All : aliased constant S := "/ALL " & "-a"; -- /NOALL (D) -- /ALL -- -- Also check the components of the GNAT run time and process the needed -- components of the GNAT RTL when building and analyzing the global -- structure for checking the global rules. S_Check_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Check_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_Check_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Check_Help : aliased constant S := "/HELP " & "-h"; -- /NOHELP (D) -- /HELP -- -- Print information about currently implemented checks. S_Check_Locs : aliased constant S := "/LOCS " & "-l"; -- /NOLOCS (D) -- /LOCS -- -- Use full source locations references in the report file. S_Diagnosis : aliased constant S := "/DIAGNOSTIC_LIMIT=#" & "-m#"; -- /DIAGNOSTIC_LIMIT=500 (D) -- /DIAGNOSTIC_LIMIT=nnn -- -- NNN is a decimal integer in the range of 1 to 1000 and limits the -- number of diagnostic messages to be generated into Stdout to that -- number. Once that number has been reached, gnatcheck stops -- to print out diagnoses into Stderr. If NNN is equal to 0, this means -- that there is no limit on the number of diagnoses in Stdout. S_Check_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Check_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- gnatcheck. The source directories to be searched will be communicated -- to gnatcheck through logical name ADA_PRJ_INCLUDE_FILE. S_Check_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Work quietly, only output warnings and errors. S_Check_Time : aliased constant S := "/TIME " & "-t"; -- /NOTIME (D) -- /TIME -- -- Print out execution time S_Check_Log : aliased constant S := "/LOG " & "-log"; -- /NOLOG (D) -- /LOG -- -- Duplicate all the output sent to Stderr into a log file. S_Check_Short : aliased constant S := "/SHORT " & "-s"; -- /NOSHORT (D) -- /SHORT -- -- Generate a short form of the report file. S_Check_Include : aliased constant S := "/INCLUDE_FILE=@" & "--include-file=@"; -- /INCLUDE_FILE=filename -- -- Add the content of the specified text file to the generated report -- file. S_Check_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Check_Template : aliased constant S := "/TEMPLATE=@" & "--write-rules=@"; -- /TEMPLATE=filename -- -- Generate the rule template into the specified file. S_Check_Verb : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- The version number and copyright notice are output, as well as exact -- copies of the gnat1 commands spawned to obtain the chop control -- information. S_Check_Out : aliased constant S := "/OUTPUT=@" & "-o@"; -- /OUTPUT=filename -- -- Specify the name of the output file. Check_Switches : aliased constant Switches := (S_Check_Add 'Access, S_Check_All 'Access, S_Diagnosis 'Access, S_Check_Ext 'Access, S_Check_Files 'Access, S_Check_Follow 'Access, S_Check_Help 'Access, S_Check_Locs 'Access, S_Check_Mess 'Access, S_Check_Project 'Access, S_Check_Quiet 'Access, S_Check_Time 'Access, S_Check_Log 'Access, S_Check_Short 'Access, S_Check_Include 'Access, S_Check_Subdirs 'Access, S_Check_Template'Access, S_Check_Verb 'Access, S_Check_Out 'Access); ---------------------------- -- Switches for GNAT CHOP -- ---------------------------- S_Chop_Comp : aliased constant S := "/COMPILATION " & "-c"; -- /NOCOMPILATION (D) -- /COMPILATION -- -- Compilation mode, handle configuration pragmas strictly according to -- RM rules. S_Chop_File : aliased constant S := "/FILE_NAME_MAX_LENGTH=#" & "-k#"; -- /FILE_NAME_MAX_LENGTH[=nnn] -- -- Limit generated file names to NNN (default of 8) characters. This is -- useful if the resulting set of files is required to be interoperable -- with systems like MS-DOS which limit the length of file names. S_Chop_Help : aliased constant S := "/HELP " & "-h"; -- /NOHELP (D) -- /HELP -- -- Print usage information. S_Chop_Over : aliased constant S := "/OVERWRITE " & "-w"; -- /NOOVERWRITE (D) -- /OVERWRITE -- -- Overwrite existing file names. Normally GNAT CHOP regards it as a -- fatal error situation if there is already a file with the same name as -- a file it would otherwise output. The /OVERWRITE qualifier bypasses -- this check, and any such existing files will be silently overwritten. S_Chop_Pres : aliased constant S := "/PRESERVE " & "-p"; -- /NOPRESERVE (D) -- /PRESERVE -- -- Causes the file modification time stamp of the input file to be -- preserved and used for the time stamp of the output file(s). This may -- be useful for preserving coherency of time stamps in an environment -- where gnatchop is used as part of a standard build process. S_Chop_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Work quietly, only output warnings and errors. S_Chop_Ref : aliased constant S := "/REFERENCE " & "-r"; -- /NOREFERENCE (D) -- /REFERENCE -- -- Generate "Source_Reference" pragmas. Use this qualifier if the output -- files are regarded as temporary and development is to be done in terms -- of the original unchopped file. The /REFERENCE qualifier causes -- "Source_Reference" pragmas to be inserted into each of the generated -- files to refers back to the original file name and line number. The -- result is that all error messages refer back to the original unchopped -- file. -- -- In addition, the debugging information placed into the object file -- (when the /DEBUG qualifier of GNAT COMPILE or GNAT MAKE is specified) -- also refers back to this original file so that tools like profilers -- and debuggers will give information in terms of the original unchopped -- file. S_Chop_Verb : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- The version number and copyright notice are output, as well as exact -- copies of the gnat1 commands spawned to obtain the chop control -- information. Chop_Switches : aliased constant Switches := (S_Chop_Comp 'Access, S_Chop_File 'Access, S_Chop_Help 'Access, S_Chop_Over 'Access, S_Chop_Pres 'Access, S_Chop_Quiet 'Access, S_Chop_Ref 'Access, S_Chop_Verb 'Access); ----------------------------- -- Switches for GNAT CLEAN -- ----------------------------- S_Clean_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Clean_Compil : aliased constant S := "/COMPILER_FILES_ONLY " & "-c"; -- /NOCOMPILER_FILES_ONLY (D) -- /COMPILER_FILES_ONLY -- -- Only attempt to delete the files produced by the compiler, not those -- produced by the binder or the linker. The files that are not to be -- deleted are library files, interface copy files, binder generated files -- and executable files. S_Clean_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- -- Look for ALI or object files in the directory where GNAT CLEAN was -- invoked. -- -- /NOCURRENT_DIRECTORY -- -- Do not look for ALI or object files in the directory where GNAT CLEAN -- was invoked. S_Clean_Delete : aliased constant S := "/DELETE " & "!-n"; -- /DELETE (D) -- -- Delete the files that are not read-only. -- -- /NODELETE -- -- Informative-only mode. Do not delete any files. Output the list of the -- files that would have been deleted if this switch was not specified. S_Clean_Dirobj : aliased constant S := "/DIRECTORY_OBJECTS=@" & "-D@"; -- /DIRECTORY_OBJECTS=<file> -- -- Find the object files and .ALI files in <file>. -- This qualifier is not compatible with /PROJECT_FILE. S_Clean_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Clean_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Clean_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " & "-F"; -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D) -- /FULL_PATH_IN_BRIEF_MESSAGES -- -- When using project files, if some errors or warnings are detected -- during parsing and verbose mode is not in effect (no use of qualifier -- /VERBOSE), then error lines start with the full path name of the -- project file, rather than its simple file name. S_Clean_Help : aliased constant S := "/HELP " & "-h"; -- /NOHELP (D) -- /HELP -- -- Output a message explaining the usage of gnatclean. S_Clean_Index : aliased constant S := "/SOURCE_INDEX=#" & "-i#"; -- /SOURCE_INDEX=nnn -- -- Specifies the index of the units in the source file -- By default, source files are mono-unit and there is no index S_Clean_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Clean_Object : aliased constant S := "/OBJECT_SEARCH=*" & "-aO*"; -- /OBJECT_SEARCH=(directory,...) -- -- When searching for library and object files, look in the specified -- directories. The order in which library files are searched is the same -- as for MAKE. S_Clean_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- compiler. The source and object directories to be searched will be -- communicated to gnatclean through logical names ADA_PRJ_INCLUDE_FILE -- and ADA_PRJ_OBJECTS_FILE. S_Clean_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Quiet output. If there are no error, do not output anything, except in -- verbose mode (qualifier /VERBOSE) or in informative-only mode -- (qualifier /NODELETE). S_Clean_Recurs : aliased constant S := "/RECURSIVE " & "-r"; -- /NORECURSIVE (D) -- /RECURSIVE -- -- When a project file is specified (using switch -P), clean all imported -- and extended project files, recursively. If this qualifier is not -- specified, only the files related to the main project file are to be -- deleted. This qualifier has no effect if no project file is specified. S_Clean_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory,...) -- -- Equivalent to /OBJECT_SEARCH=(directory,...). S_Clean_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Clean_USL : aliased constant S := "/UNCHECKED_SHARED_LIB_IMPORTS " & "--unchecked-shared-lib-imports"; -- /NOUNCHECKED_SHARED_LIB_IMPORTS (D) -- /UNCHECKED_SHARED_LIB_IMPORTS -- -- Allow shared library projects to import static library projects S_Clean_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Verbose mode. Clean_Switches : aliased constant Switches := (S_Clean_Add 'Access, S_Clean_Compil 'Access, S_Clean_Current'Access, S_Clean_Delete 'Access, S_Clean_Dirobj 'Access, S_Clean_Ext 'Access, S_Clean_Follow 'Access, S_Clean_Full 'Access, S_Clean_Help 'Access, S_Clean_Index 'Access, S_Clean_Mess 'Access, S_Clean_Object 'Access, S_Clean_Project'Access, S_Clean_Quiet 'Access, S_Clean_Recurs 'Access, S_Clean_Search 'Access, S_Clean_Subdirs'Access, S_Clean_Verbose'Access, S_Clean_USL 'Access); ------------------------------- -- Switches for GNAT COMPILE -- ------------------------------- S_GCC_Ada_83 : aliased constant S := "/83 " & "-gnat83"; -- /NO83 (D) -- /83 -- -- Although GNAT is primarily an Ada 95 compiler, it accepts this -- qualifier to specify that an Ada 83 mode program is being compiled. If -- you specify this qualifier, GNAT rejects Ada 95 extensions and applies -- Ada 83 semantics. It is not possible to guarantee this qualifier does -- a perfect job; for example, some subtle tests of pathological cases, -- such as are found in ACVC tests that have been removed from the ACVC -- suite for Ada 95, may not compile correctly. However for practical -- purposes, using this qualifier should ensure that programs that -- compile correctly under the /83 qualifier can be ported reasonably -- easily to an Ada 83 compiler. This is the main use of this qualifier. -- -- With few exceptions (most notably the need to use "<>" on -- unconstrained generic formal parameters), it is not necessary to use -- this qualifier switch when compiling Ada 83 programs, because, with -- rare and obscure exceptions, Ada 95 is upwardly compatible with Ada -- 83. This means that a correct Ada 83 program is usually also a correct -- Ada 95 program. S_GCC_Ada_95 : aliased constant S := "/95 " & "-gnat95"; -- /95 (D) -- -- Allows GNAT to recognize the full range of Ada 95 constructs. -- This is the normal default for GNAT Pro. S_GCC_Ada_05 : aliased constant S := "/05 " & "-gnat05"; -- /05 (D) -- -- Allows GNAT to recognize the full range of Ada 2005 constructs. S_GCC_Ada_2005 : aliased constant S := "/2005 " & "-gnat2005"; -- /05 (D) -- -- Allows GNAT to recognize the full range of Ada 2005 constructs. -- Equivalent to /05 (/2005 is the preferred usage). S_GCC_Ada_12 : aliased constant S := "/12 " & "-gnat12"; -- /05 (D) -- -- Allows GNAT to recognize all implemented proposed Ada 2012 -- extensions. See features file for list of implemented features. S_GCC_Ada_2012 : aliased constant S := "/2012 " & "-gnat2012"; -- /05 (D) -- -- Allows GNAT to recognize all implemented proposed Ada 2012 -- extensions. See features file for list of implemented features. -- Equivalent to /12 (/2012 is the preferred usage). S_GCC_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_GCC_Asm : aliased constant S := "/ASM " & "-S,!-c"; -- /NOASM (D) -- /ASM -- -- Use to cause the assembler source file to be generated, using S as the -- filetype, instead of the object file. This may be useful if you need -- to examine the generated assembly code. S_GCC_AValid : aliased constant S := "/ASSUME_VALID " & "-gnatB"; -- /NO_ASSUME_VALID (D) -- /ASSUME_VALID -- -- Use to tell the compiler to assume that all objects have valid values -- except those occurring as prefixes to 'Valid attributes. In the default -- mode, the compiler assumes that values may be invalid unless it can -- be sure that they are valid, and code is generated to allow for this -- possibility. The use of /ASSUME_VALID will improve the code. S_GCC_CategW : aliased constant S := "/CATEGORIZATION_WARNINGS " & "-gnateP"; -- /NO_CATEGORIZATION_WARNINGS (D) -- /CATEGORIZATION_WARNINGS -- -- Use to tell the compiler to disable categorization dependency errors. -- Ada requires that units that WITH one another have compatible -- categories, for example a Pure unit cannot WITH a Preelaborate unit. -- If this switch is used, these errors become warnings (which can be -- ignored, or suppressed in the usual manner). This can be useful in -- some specialized circumstances such as the temporary use of special -- test software. S_GCC_Checks : aliased constant S := "/CHECKS=" & "FULL " & "-gnato,!-gnatE,!-gnatp " & "OVERFLOW " & "-gnato " & "ELABORATION " & "-gnatE " & "ASSERTIONS " & "-gnata " & "DEFAULT " & "!-gnato,!-gnatp " & "STACK " & "-fstack-check " & "SUPPRESS_ALL " & "-gnatp " & "UNSUPPRESS_ALL " & "-gnat-p"; -- /NOCHECKS -- /CHECKS[=(keyword[,...])] -- -- If you compile with the default options, GNAT will insert many runtime -- checks into the compiled code, including code that performs range -- checking against constraints, but not arithmetic overflow checking for -- integer operations (including division by zero) or checks for access -- before elaboration on subprogram calls. All other runtime checks, as -- required by the Ada 95 Reference Manual, are generated by default. -- -- You may specify one or more of the following keywords to the /CHECKS -- qualifier to modify this behavior: -- -- DEFAULT The behavior described above. This is the default -- if the /CHECKS qualifier is not present on the -- command line. Same as /NOCHECKS. -- -- OVERFLOW Enables overflow checking for integer operations and -- checks for access before elaboration on subprogram -- calls. This causes GNAT to generate slower and larger -- executable programs by adding code to check for both -- overflow and division by zero (resulting in raising -- "Constraint_Error" as required by Ada semantics). -- Similarly, GNAT does not generate elaboration check -- by default, and you must specify this keyword to -- enable them. -- -- Note that this keyword does not affect the code -- generated for any floating-point operations; it -- applies only to integer operations. For the case of -- floating-point, GNAT has the "Machine_Overflows" -- attribute set to "False" and the normal mode of -- operation is to generate IEEE NaN and infinite values -- on overflow or invalid operations (such as dividing -- 0.0 by 0.0). -- -- ELABORATION Enables dynamic checks for access-before-elaboration -- on subprogram calls and generic instantiations. -- -- ASSERTIONS The pragmas "Assert" and "Debug" normally have no -- effect and are ignored. This keyword causes "Assert" -- and "Debug" pragmas to be activated, as well as -- "Check", "Precondition" and "Postcondition" pragmas. -- -- SUPPRESS_ALL Suppress all runtime checks as though you have -- "pragma Suppress (all_checks)" in your source. Use -- this switch to improve the performance of the code at -- the expense of safety in the presence of invalid data -- or program bugs. -- -- UNSUPPRESS_ALL Cancels effect of previous SUPPRESS_ALL. -- -- DEFAULT Suppress the effect of any option OVERFLOW or -- ASSERTIONS. -- -- FULL (D) Similar to OVERFLOW, but suppress the effect of any -- option ELABORATION or SUPPRESS_ALL. -- -- These keywords only control the default setting of the checks. You -- may modify them using either "Suppress" (to remove checks) or -- "Unsuppress" (to add back suppressed checks) pragmas in your program -- source. S_GCC_ChecksX : aliased constant S := "/NOCHECKS " & "-gnatp,!-gnato,!-gnatE"; -- NODOC (see /CHECKS) S_GCC_Compres : aliased constant S := "/COMPRESS_NAMES " & "-gnatC"; -- /NOCOMPRESS_NAMES (D) -- /COMPRESS_NAMES -- -- Compress debug information and external symbol name table entries. -- In the generated debugging information, and also in the case of long -- external names, the compiler uses a compression mechanism if the name -- is very long. This compression method uses a checksum, and avoids -- trouble on some operating systems which have difficulty with very long -- names. S_GCC_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" & "-gnatec>"; -- /CONFIGURATION_PRAGMAS_FILE=file -- -- Specify a configuration pragmas file that need to be taken into account S_GCC_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- /NOCURRENT_DIRECTORY -- -- Look for source files in the default directory. S_GCC_Data : aliased constant S := "/DATA_PREPROCESSING=<" & "-gnatep>"; -- /DATA_PREPROCESSING=file_name -- -- This qualifier indicates to the compiler the file name (without -- directory information) of the preprocessor data file to use. -- The preprocessor data file should be found in the source directories. -- -- A preprocessing data file is a text file with significant lines -- indicating how should be preprocessed either a specific source or all -- sources not mentioned in other lines. A significant line is a non -- empty, non comment line. Comments are similar to Ada comments. -- -- Each significant line starts with either a literal string or the -- character '*'. A literal string is the file name (without directory -- information) of the source to preprocess. A character '*' indicates the -- preprocessing for all the sources that are not specified explicitly on -- other lines. It is an error to have two lines with the same file name -- or two lines starting with the character '*'. -- -- After the file name or the character '*', another optional literal -- string indicating the file name of the definition file to be used for -- preprocessing. (see 15.3 Form of Definitions File. The definition files -- are found by the compiler in one of the source directories. In some -- cases, when compiling a source in a directory other than the current -- directory, if the definition file is in the current directory, it may -- be necessary to add the current directory as a source directory through -- qualifier "/SEARCH=[]", otherwise the compiler would not find the -- definition file. -- -- Then, optionally, switches similar to those of gnatprep may be found. -- Those switches are: -- -- -b Causes both preprocessor lines and the lines deleted by -- preprocessing to be replaced by blank lines, preserving -- the line number. This switch is always implied; -- however, if specified after `-c' it cancels the effect -- of `-c'. -- -- -c Causes both preprocessor lines and the lines deleted by -- preprocessing to be retained as comments marked with -- the special string "--! ". -- -- -Dsymbol=value Define or redefine a symbol, associated with value. -- A symbol is an Ada identifier, or an Ada reserved word, -- with the exception of "if", "else", "elsif", "end", -- "and", "or" and "then". value is either a literal -- string, an Ada identifier or any Ada reserved word. -- A symbol declared with this switch replaces a symbol -- with the same name defined in a definition file. -- -- -s Causes a sorted list of symbol names and values to be -- listed on the standard output file. -- -- -u Causes undefined symbols to be treated as having the -- value FALSE in the context of a preprocessor test. -- In the absence of this option, an undefined symbol -- in a #if or #elsif test will be treated as an error. -- -- Examples of valid lines in a preprocessor data file: -- -- "toto.adb" "prep.def" -u -- -- preprocess "toto.adb", using definition file "prep.def", -- -- undefined symbol are False. -- -- * -c -DVERSION=V101 -- -- preprocess all other sources without a definition file; -- -- suppressed lined are commented; symbol VERSION has the value -- -- V101. -- -- "titi.adb" "prep2.def" -s -- -- preprocess "titi.adb", using definition file "prep2.def"; -- -- list all symbols with their values. S_GCC_Debug : aliased constant S := "/DEBUG=" & "SYMBOLS " & "-g2 " & "NOSYMBOLS " & "!-g2 " & "TRACEBACK " & "-g1 " & "ALL " & "-g3 " & "NONE " & "-g0 " & "NOTRACEBACK " & "-g0"; -- /DEBUG[=debug-level] -- /NODEBUG -- -- Specifies how much debugging information is to be included in -- the resulting object fie. -- -- 'debug-level' is one of the following: -- -- SYMBOLS (D) Include both debugger symbol records and traceback -- in the object file. -- -- ALL Include debugger symbol records, traceback plus -- extra debug information in the object file. -- -- NONE Excludes both debugger symbol records and traceback -- from the object file. Same as /NODEBUG. -- -- TRACEBACK Includes only traceback records in the object -- file. This is the default when /DEBUG is not used. S_GCC_DebugX : aliased constant S := "/NODEBUG " & "!-g"; -- NODOC (see /Debug) S_GCC_Dist : aliased constant S := "/DISTRIBUTION_STUBS=" & "RECEIVER " & "-gnatzr " & "CALLER " & "-gnatzc"; -- /NODISTRIBUTION_STUBS (D) -- /DISTRIBUTION_STUBS[=dist-opt] -- -- 'dist-opt' is either RECEIVER (the default) or SENDER and indicates -- that stubs for use in distributed programs (see the Distributed -- Systems Annex of the Ada RM) should be generated. S_GCC_DistX : aliased constant S := "/NODISTRIBUTION_STUBS " & "!-gnatzr,!-gnatzc"; -- NODOC (see /DISTRIBUTION_STUBS) S_GCC_Error : aliased constant S := "/ERROR_LIMIT=#" & "-gnatm#"; -- /NOERROR_LIMIT (D) -- /ERROR_LIMIT=nnn -- -- NNN is a decimal integer in the range of 1 to 999999 and limits the -- number of error messages to be generated to that number. Once that -- number has been reached, the compilation is abandoned. -- Specifying 999999 is equivalent to /NOERROR_LIMIT. S_GCC_ErrorX : aliased constant S := "/NOERROR_LIMIT " & "-gnatm999999"; -- NODOC (see /ERROR_LIMIT) S_GCC_Except : aliased constant S := "/EXTRA_EXCEPTION_INFORMATION " & "-gnateE"; -- /EXTRA_EXCEPTION_INFORMATION -- -- Generate extra information in exception messages, in particular -- display extra column information and the value and range associated -- with index and range check failures, and extra column information for -- access checks. S_GCC_Expand : aliased constant S := "/EXPAND_SOURCE " & "-gnatG"; -- /NOEXPAND_SOURCE (D) -- /EXPAND_SOURCE -- -- Produces a listing of the expanded code in Ada source form. For -- example, all tasking constructs are reduced to appropriate run-time -- library calls. The maximum line length for the listing 72. S_GCC_Lexpand : aliased constant S := "/LEXPAND_SOURCE=#" & "-gnatG#"; -- /LEXPAND_SOURCE=nnn -- -- Produces a listing of the expanded code in Ada source form. For -- example, all tasking constructs are reduced to appropriate run-time -- library calls. The parameter is the maximum line length for the -- listing. S_GCC_Extend : aliased constant S := "/EXTENSIONS_ALLOWED " & "-gnatX"; -- /NOEXTENSIONS_ALLOWED (D) -- /EXTENSIONS_ALLOWED -- -- GNAT specific language extensions allowed. S_GCC_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_GCC_File : aliased constant S := "/FILE_NAME_MAX_LENGTH=#" & "-gnatk#"; -- /FILE_NAME_MAX_LENGTH=nnn -- -- Activates file name "krunching". NNN, a decimal integer in the range -- 1-999, indicates the maximum allowable length of a file name (not -- including the ADS or ADB filetype. The default is not to enable file -- name krunching. S_GCC_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_GCC_Force : aliased constant S := "/FORCE_ALI " & "-gnatQ"; -- /NOFORCE_ALI (D) -- /FORCE_ALI -- -- In normal operation mode, the .ALI file is not generated if any -- illegalities are detected in the program. The use of this qualifier -- forces generation of the .ALI file. This file is marked as being -- in error, so it cannot be used for binding purposes, but it does -- contain reasonably complete cross-reference information, and thus may -- be useful for use by tools (e.g. semantic browsing tools or integrated -- development environments) that are driven from the .ALI file. S_GCC_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " & "-gnatef"; -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D) -- /FULL_PATH_IN_BRIEF_MESSAGES -- -- When using project files, if some errors or warnings are detected -- during parsing and verbose mode is not in effect (no use of qualifier -- /VERBOSE), then error lines start with the full path name of the -- project file, rather than its simple file name. S_GCC_Generate : aliased constant S := "/GENERATE_PROCESSED_SOURCE " & "-gnateG"; -- /NOGENERATE_PROCESSED_SOURCE (D) -- /GENERATE_PROCESSED_SOURCE -- -- Generate a file <source>_prep if the integrated preprocessing -- is modifying the source text. S_GCC_GNAT : aliased constant S := "/GNAT_INTERNAL " & "-gnatg"; -- /NOGNAT_INTERNAL (D) -- /GNAT_INTERNAL -- -- Internal GNAT implementation mode. This should not be used for -- applications programs, it is intended only for use by the compiler -- and its run-time library. For documentation, see the GNAT sources. -- Note that it implies /WARNINGS=ALL,ERRORS and /STYLE_CHECKS=GNAT -- so that all standard warnings and all standard style options are -- turned on. All warnings and style error messages are treated as -- errors. S_GCC_Help : aliased constant S := "/HELP " & "-gnath"; -- /NOHELP (D) -- /HELP -- -- Output usage information. S_GCC_Ident : aliased constant S := "/IDENTIFIER_CHARACTER_SET=" & "DEFAULT " & "-gnati1 " & "1 " & "-gnati1 " & "2 " & "-gnati2 " & "3 " & "-gnati3 " & "4 " & "-gnati4 " & "5 " & "-gnati5 " & "PC " & "-gnatip " & "PC850 " & "-gnati8 " & "FULL_UPPER " & "-gnatif " & "NO_UPPER " & "-gnatin " & "WIDE " & "-gnatiw"; -- /NOIDENTIFIER_CHARACTER_SET (D) -- /IDENTIFIER_CHARACTER_SET=char-set -- -- Normally GNAT recognizes the Latin-1 character set in source program -- identifiers, as described in the reference manual. This qualifier -- causes GNAT to recognize alternate character sets in identifiers. -- 'char-set' is one of the following strings indicating the character -- set: -- -- DEFAULT (D) Equivalent to 1, below. Also equivalent to -- /NOIDENTIFIER_CHARACTER_SET. -- -- 1 The basic character set is Latin-1. This character -- set is defined by ISO standard 8859, part 1. The lower -- half (character codes 16#00# ... 16#7F#) is identical -- to standard ASCII coding, but the upper half is used -- to represent additional characters. This includes -- extended letters used by European languages, such as -- the umlaut used in German. -- -- You may use any of these extended characters freely -- in character or string literals. In addition, the -- extended characters that represent letters can be -- used in identifiers. -- -- 2 Latin-2 letters allowed in identifiers, with uppercase -- and lowercase equivalence. -- -- 3 Latin-3 letters allowed in identifiers, with uppercase -- and lower case equivalence. -- -- 4 Latin-4 letters allowed in identifiers, with uppercase -- and lower case equivalence. -- -- PC IBM PC code page 437. This code page is the normal -- default for PCs in the U.S. It corresponds to the -- original IBM PC character set. This set has some, but -- not all, of the extended Latin-1 letters, but these -- letters do not have the same encoding as Latin-1. In -- this mode, these letters are allowed in identifiers -- with uppercase and lowercase equivalence. -- -- PC850 This code page (850) is a modification of 437 extended -- to include all the Latin-1 letters, but still not with -- the usual Latin-1 encoding. In this mode, all these -- letters are allowed in identifiers with uppercase and -- lower case equivalence. -- -- FULL_UPPER Any character in the range 80-FF allowed in -- identifiers, and all are considered distinct. In -- other words, there are no uppercase and lower case -- equivalences in this range. -- -- NO_UPPER No upper-half characters in the range 80-FF are -- allowed in identifiers. This gives Ada 95 -- compatibility for identifier names. -- -- WIDE GNAT allows wide character codes to appear in -- character and string literals, and also optionally -- in identifiers. See the /WIDE_CHARACTER_ENCODING -- qualifier for information on encoding formats. S_GCC_IdentX : aliased constant S := "/NOIDENTIFIER_CHARACTER_SET " & "-gnati1"; -- NODOC (see /IDENTIFIER_CHARACTER_SET) S_GCC_Ignore : aliased constant S := "/IGNORE_REP_CLAUSES " & "-gnatI"; -- /IGNORE_REP_CLAUSES -- -- Causes all representation clauses to be ignored and treated as -- comments. Useful when compiling foreign code (for example when ASIS -- is used to analyze such code). S_GCC_Immed : aliased constant S := "/IMMEDIATE_ERRORS " & "-gnatdO"; -- /NOIMMEDIATE_ERRORS (D) -- /IMMEDIATE_ERRORS -- -- Causes errors to be displayed as soon as they are encountered, rather -- than after compilation is terminated. If GNAT terminates prematurely -- or goes into an infinite loop, the last error message displayed may -- help to pinpoint the culprit. S_GCC_Inline : aliased constant S := "/INLINE=" & "PRAGMA " & "-gnatn " & "FULL " & "-gnatN " & "SUPPRESS " & "-fno-inline"; -- /NOINLINE (D) -- /INLINE[=keyword] -- -- Selects the level of inlining for your program. In the absence of this -- qualifier, GNAT does not attempt inlining across units and does not -- need to access the bodies of subprograms for which "pragma Inline" is -- specified if they are not in the current unit. -- -- The supported keywords are as follows: -- -- PRAGMA (D) Recognize and process "Inline" pragmas. However, -- for the inlining to actually occur, optimization -- must be enabled. This enables inlining across unit -- boundaries, that is, inlining a call in one unit of -- a subprogram declared in a with'ed unit. The compiler -- will access these bodies, creating an extra source -- dependency for the resulting object file, and where -- possible, the call will be inlined. -- -- This qualifier also turns on full optimization and -- requests GNAT to try to attempt automatic inlining -- of small subprograms within a unit. -- -- Specifying /OPTIMIZE=NONE will disable the main effect -- of this qualifier, but you may specify other -- optimization options, to get either lower -- (/OPTIMIZE=SOME) or higher (/OPTIMIZE=UNROLL_LOOPS) -- levels of optimization. -- -- FULL Front end inlining. The front end inlining activated -- by this switch is generally more extensive, and quite -- often more effective than the standard PRAGMA inlining -- mode. It will also generate additional dependencies. -- -- SUPPRESS Suppresses all inlining, even if other optimization -- or inlining switches are set. S_GCC_InlineX : aliased constant S := "/NOINLINE " & "!-gnatn,!-gnatN"; -- NODOC (see /INLINE) S_GCC_Intsrc : aliased constant S := "/INTERSPERSE_SOURCE " & "-gnatL"; -- /NO_INTERSPERSE_SOURCE (D) -- /INTERSPERSE_SOURCE -- -- Causes output from /XDEBUG or /EXPAND_SOURCE to be interspersed with -- lines from the original source file, output as comment lines with the -- associated line number. S_GCC_Just : aliased constant S := "/JUSTIFY_MESSAGES=#" & "-gnatj#"; -- /NO_JUSTIFY_MESSAGES (D) -- /JUSTIFY_MESSAGES=nnn -- -- Causes error messages to be reformatted so that a message and all its -- continuation lines count as one warning or error in the statistics on -- total errors, and the message is broken down into lines (justified) so -- that no line is longer than nnn characters. The default message -- behavior (each message counted separately and not reformatted to fit -- a particular line length) can be obtained using /NO_JUSTIFY_MESSAGES. S_GCC_JustX : aliased constant S := "/NO_JUSTIFY_MESSAGES " & "-gnatj0"; -- NODOC (see /JUSTIFY_MESSAGES) S_GCC_Length : aliased constant S := "/MAX_LINE_LENGTH=#" & "-gnatyM#"; -- /MAX_LINE_LENGTH=nnn -- -- Set maximum line length. -- The length of lines must not exceed the given value nnn. S_GCC_List : aliased constant S := "/LIST " & "-gnatl"; -- /NOLIST (D) -- /LIST -- -- Cause a full listing of the file to be generated. In the case where -- a body is compiled, the corresponding spec is also listed, along -- with any subunits. S_GCC_Machine : aliased constant S := "/MACHINE_CODE_LISTING " & "-source-listing"; -- /NOMACHINE_CODE_LISTING (D) -- /MACHINE_CODE_LISTING -- -- Cause a full machine code listing of the file to be generated to -- <filename>.lis. Interspersed source is included if the /DEBUG -- qualifier is also present. S_GCC_Mapping : aliased constant S := "/MAPPING_FILE=<" & "-gnatem>"; -- /MAPPING_FILE=file_name -- -- Use mapping file file_name -- -- A mapping file is a way to communicate to the compiler two mappings: -- from unit names to file names (without any directory information) and -- from file names to path names (with full directory information). -- These mappings are used by the compiler to short-circuit the path -- search. -- -- The use of mapping files is not required for correct operation of the -- compiler, but mapping files can improve efficiency, particularly when -- sources are read over a slow network connection. In normal operation, -- you need not be concerned with the format or use of mapping files, -- and /MAPPING_FILE is not a qualifier that you would use explicitly. -- It is intended only for use by automatic tools such as GNAT MAKE -- running under the project file facility. The description here of the -- format of mapping files is provided for completeness and for possible -- use by other tools. -- -- A mapping file is a sequence of sets of three lines. In each set, the -- first line is the unit name, in lower case, with "%s" appended for -- specifications and "%b" appended for bodies; the second line is the -- file name; and the third line is the path name. -- -- Example: -- -- main%b -- main.2_ada -- /gnat/project1/sources/main.2_ada -- -- When qualifier ?MAPPING_FILE is specified, the compiler will create in -- memory the two mappings from the specified file. If there is any -- problem (non existent file, truncated file or duplicate entries), -- no mapping will be created. -- -- Several /MAPPING_FILE qualifiers may be specified; however, only the -- last one on the command line will be taken into account. -- -- When using a project file, GNAT MAKE creates a temporary mapping file -- and communicates it to the compiler using this switch. S_GCC_Multi : aliased constant S := "/MULTI_UNIT_INDEX=#" & "-gnateI#"; -- /MULTI_UNIT_INDEX=nnn -- -- Specify the index of the unit to compile in a multi-unit source file. S_GCC_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_GCC_Nesting : aliased constant S := "/MAX_NESTING=#" & "-gnatyL#"; -- /MAX_NESTING=nnn -- -- Set maximum level of nesting of constructs (including subprograms, -- loops, blocks, packages, and conditionals). -- The level of nesting must not exceed the given value nnn. -- A value of zero disable this style check (not enabled by default). S_GCC_Noadc : aliased constant S := "/NO_GNAT_ADC " & "-gnatA"; -- /NO_GNAT_ADC -- -- Cause the compiler to ignore any configuration pragmas file GNAT.ADC -- in the default directory. Implied by qualifier /PROJECT_FILE. -- Often used in conjunction with qualifier /CONFIGURATION_PRAGMAS_FILE. S_GCC_Noload : aliased constant S := "/NOLOAD " & "-gnatc"; -- /NOLOAD -- -- Cause the compiler to operate in semantic check mode with full -- checking for all illegalities specified in the reference manual, but -- without generation of any source code (no object or ALI file -- generated). -- -- Since dependent files must be accessed, you must follow the GNAT -- semantic restrictions on file structuring to operate in this mode: -- -- o The needed source files must be accessible. -- o Each file must contain only one compilation unit. -- o The file name and unit name must match. -- -- The output consists of error messages as appropriate. No object file -- or ALI file is generated. The checking corresponds exactly to the -- notion of legality in the Ada reference manual. -- -- Any unit can be compiled in semantics-checking-only mode, including -- units that would not normally be compiled (generic library units, -- subunits, and specifications where a separate body is present). S_GCC_Nostinc : aliased constant S := "/NOSTD_INCLUDES " & "-nostdinc"; -- /NOSTD_INCLUDES -- -- Do not look in the default directory for source files of the runtime. S_GCC_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " & "-nostdlib"; -- /NOSTD_LIBRARIES -- -- Do not look for library files in the system default directory. S_GCC_NoWarnP : aliased constant S := "/NOWARNING_PRAGMAS " & "-gnatd.i"; -- /NOWARNING_PRAGMAS -- -- Causes all Warnings pragmas to be ignored. Useful to check if the -- program has obsolete warnings pragmas that are hiding problems. S_GCC_Opt : aliased constant S := "/OPTIMIZE=" & "ALL " & "-O2,!-O0,!-O1,!-O3 " & "NONE " & "-O0,!-O1,!-O2,!-O3 " & "SOME " & "-O1,!-O0,!-O2,!-O3 " & "SPACE " & "-Os,!-O0,!-O1,!-O2,!-O3 " & "DEVELOPMENT " & "-O1,!-O0,!-O2,!-O3 " & "UNROLL_LOOPS " & "-funroll-loops " & "NO_STRICT_ALIASING " & "-fno-strict-aliasing " & "INLINING " & "-O3,!-O0,!-O1,!-O2"; -- /NOOPTIMIZE (D) -- /OPTIMIZE[=(keyword[,...])] -- -- Selects the level of optimization for your program. The supported -- keywords are as follows: -- -- ALL (D) Perform most optimizations, including those that -- may be expensive. -- -- NONE Do not do any optimizations. Same as /NOOPTIMIZE. -- -- SOME Perform some optimizations, but omit ones that -- are costly in compilation time. -- -- SPACE Optimize space usage -- -- DEVELOPMENT Same as SOME. -- -- INLINING Full optimization, and also attempt automatic inlining -- of small subprograms within a unit -- -- UNROLL_LOOPS Try to unroll loops. This keyword may be specified -- with any keyword above other than NONE. Loop -- unrolling usually, but not always, improves the -- performance of programs. -- -- NO_STRICT_ALIASING -- Suppress aliasing analysis. When optimization is -- enabled (ALL or SOME above), the compiler assumes -- that pointers do in fact point to legitimate values -- of the pointer type (allocated from the proper pool). -- If this assumption is violated, e.g. by the use of -- unchecked conversion, then it may be necessary to -- suppress this assumption using this keyword (which -- may be specified only in conjunction with any -- keyword above, other than NONE). S_GCC_OptX : aliased constant S := "/NOOPTIMIZE " & "-O0,!-O1,!-O2,!-O3"; -- NODOC (see /OPTIMIZE) S_GCC_Output : aliased constant S := "/OUTPUT_FILE=<" & "-gnatl=>"; -- /OUTPUT_FILE=fname -- -- This has the same effect as /LIST except that the output is written -- to a file instead of to standard output. If the given fname -- does not start with a period, then it is the full name of the file -- to be written. If fname starts with a period, the name of the file -- is the concatenation of to the name of the file being compiled with -- fname where the period is replace by an underline. For example, if -- file xyz.adb is compiled with -gnatl=.lst, then the output is written -- to file xyz.adb_lst. S_GCC_Pointer : aliased constant S := "/POINTER_SIZE=" & "64 " & "-mmalloc64 " & "LONG " & "-mmalloc64 " & "32 " & "-mno-malloc64 " & "SHORT " & "-mno-malloc64"; -- /POINTER_SIZE=64 (D) -- /POINTER_SIZE[=(keyword[,...])] -- -- Change how pointers and descriptors are allocated. The following -- keywords are supported: -- -- 64 (D) Allocate heap pointers in 64bit space except as -- constrained by a 32bit size clause or by -- Convention_C and generate 64bit descriptors for -- Descriptor mechanisms for calling imported -- subprograms and accept both 64bit and 32bit -- descriptors for calls to exported subprograms. -- -- LONG Equivalent to option 64. -- -- 32 Allocate all heap pointers in 32bit space and -- generate 32bit descriptors for Descriptor -- mechanisms for calling imported subprograms. -- -- SHORT Equivalent to option 32. S_GCC_Polling : aliased constant S := "/POLLING " & "-gnatP"; -- /NOPOLLING (D) -- /POLLING -- -- Enable polling. See the description of pragma Polling in the GNAT -- Reference Manual for full details. S_GCC_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- compiler. The source and object directories to be searched will be -- communicated to the compiler through logical names -- ADA_PRJ_INCLUDE_FILE and ADA_PRJ_OBJECTS_FILE. S_GCC_Psta : aliased constant S := "/PRINT_STANDARD " & "-gnatS"; -- /PRINT_STANDARD -- -- cause the compiler to output a representation of package Standard -- in a form very close to standard Ada. It is not quite possible to -- do this and remain entirely Standard (since new numeric base types -- cannot be created in standard Ada), but the output is easily -- readable to any Ada programmer, and is useful to determine the -- characteristics of target dependent types in package Standard. S_GCC_Reswarn : aliased constant S := "/TREAT_RESTRICTIONS_AS_WARNINGS " & "-gnatr"; -- /NO_TREAT_RESTRICTIONS_AS_WARNINGS (D) -- /TREAT_RESTRICTIONS_AS_WARNINGS -- -- Causes all restrictions to be treated as warnings (pragma Restriction -- treated as Restriction_Warnings, pragma Profile as Profile_Warnings, -- and pragma Ravenscar sets restriction warnings instead of restrictions) S_GCC_Report : aliased constant S := "/REPORT_ERRORS=" & "VERBOSE " & "-gnatv " & "BRIEF " & "-gnatb " & "FULL " & "-gnatf " & "IMMEDIATE " & "-gnatdO " & "DEFAULT " & "!-gnatb,!-gnatv"; -- /NOREPORT_ERRORS (D) -- /REPORT_ERRORS[=(keyword[,...])] -- -- Change the way errors are reported. The following keywords are -- supported: -- -- VERBOSE (D) Verbose mode. Full error output with source lines -- to SYS$OUTPUT. -- -- BRIEF Generate the brief format error messages to -- SYS$OUTPUT as well as the verbose format message or -- full listing. -- -- FULL Normally, the compiler suppresses error messages that -- are likely to be redundant. This keyword causes all -- error messages to be generated. One particular effect -- is for the case of references to undefined variables. -- If a given variable is referenced several times, the -- normal format of messages produces one error. With -- FULL, each undefined reference produces a separate -- error message. -- -- IMMEDIATE Normally, the compiler saves up error messages and -- generates them at the end of compilation in proper -- sequence. This keyword causes error messages to be -- generated as soon as they are detected. The use of -- IMMEDIATE usually causes error messages to be -- generated out of sequence. Use it when the compiler -- blows up due to an internal error. In this case, the -- error messages may be lost. Sometimes blowups are -- the result of mishandled error messages, so you may -- want to run with this keyword to determine whether -- any error messages were generated. -- -- DEFAULT Turn off VERBOSE and BRIEF. Same as /NOREPORT_ERRORS. S_GCC_ReportX : aliased constant S := "/NOREPORT_ERRORS " & "!-gnatb,!-gnatv"; -- NODOC (see /REPORT_ERRORS) S_GCC_Repinfo : aliased constant S := "/REPRESENTATION_INFO=" & "DEFAULT " & "-gnatR " & "NONE " & "-gnatR0 " & "ARRAYS " & "-gnatR1 " & "ARRAYS_FILE " & "-gnatR1s " & "OBJECTS " & "-gnatR2 " & "OBJECTS_FILE " & "-gnatR2s " & "SYMBOLIC " & "-gnatR3 " & "SYMBOLIC_FILE " & "-gnatR3s"; -- /NOREPRESENTATION_INFO (D) -- /REPRESENTATION_INFO[=(keyword[,...])] -- -- This qualifier controls output from the compiler of a listing showing -- representation information for declared types and objects. -- -- ARRAYS (D) Size and alignment information is listed for -- declared array and record types. -- -- ARRAYS_FILE Similar to ARRAYS, but the output is to a file -- with the name 'file_rep' where 'file' is the name -- of the corresponding source file. -- -- NONE no information is output (equivalent to omitting -- the /REPRESENTATION_INFO qualifiers). -- -- OBJECTS Size and alignment information is listed for all -- declared types and objects. -- -- OBJECTS_FILE Similar to OBJECTS, but the output is to a file -- with the name 'file_rep' where 'file' is the name -- of the corresponding source file. -- -- SYMBOLIC Symbolic expression information for values that -- are computed at run time for variant records. -- -- SYMBOLIC_FILE Similar to SYMBOLIC, but the output is to a file -- with the name 'file_rep' where 'file' is the name -- of the corresponding source file. -- -- DEFAULT Equivalent to ARRAYS. S_GCC_RepinfX : aliased constant S := "/NOREPRESENTATION_INFO " & "!-gnatR"; -- NODOC (see /REPRESENTATION_INFO) S_GCC_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" & "--RTS=|"; -- /RUNTIME_SYSTEM=xxx -- -- Build against an alternate runtime system named xxx or RTS-xxx. S_GCC_SCO : aliased constant S := "/SCO_OUTPUT " & "-gnateS"; -- /NOSCO_OUTPUT (D) -- /SCO_OUTPUT -- -- Controls the output of SCO (Source Coverage Obligation) information -- in the generated ALI file. This information is used by advanced source -- coverage tools. For a full description of the SCO format, see unit -- SCOs in the compiler sources (sco.ads/sco.adb). S_GCC_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory[,...]) -- -- When looking for source files also look in directories specified. S_GCC_Src_Info : aliased constant S := "/SRC_INFO=<" & "--source-info=>"; -- /SRC_INFO=source-info-file -- -- Specify a source info file to be read or written by the Project -- Manager when project files are used. S_GCC_Style : aliased constant S := "/STYLE_CHECKS=" & "ALL_BUILTIN " & "-gnatyy " & "0 " & "-gnaty0 " & "1 " & "-gnaty1 " & "2 " & "-gnaty2 " & "3 " & "-gnaty3 " & "4 " & "-gnaty4 " & "5 " & "-gnaty5 " & "6 " & "-gnaty6 " & "7 " & "-gnaty7 " & "8 " & "-gnaty8 " & "9 " & "-gnaty9 " & "ATTRIBUTE " & "-gnatya " & "NOATTRIBUTE " & "-gnaty-a " & "ARRAY_INDEXES " & "-gnatyA " & "NOARRAY_INDEXES " & "-gnaty-A " & "BLANKS " & "-gnatyb " & "NOBLANKS " & "-gnaty-b " & "BOOLEAN_OPERATORS " & "-gnatyB " & "NOBOOLEAN_OPERATORS " & "-gnaty-B " & "COMMENTS " & "-gnatyc " & "COMMENTS1 " & "-gnatyC " & "COMMENTS2 " & "-gnatyc " & "NOCOMMENTS " & "-gnaty-c " & "DOS_LINE_ENDINGS " & "-gnatyd " & "NODOS_LINE_ENDINGS " & "-gnaty-d " & "END " & "-gnatye " & "NOEND " & "-gnaty-e " & "VTABS " & "-gnatyf " & "NOVTABS " & "-gnaty-f " & "GNAT " & "-gnatyg " & "HTABS " & "-gnatyh " & "NOHTABS " & "-gnaty-h " & "IF_THEN " & "-gnatyi " & "NOIF_THEN " & "-gnaty-i " & "KEYWORD " & "-gnatyk " & "NOKEYWORD " & "-gnaty-k " & "LAYOUT " & "-gnatyl " & "NOLAYOUT " & "-gnaty-l " & "LINE_LENGTH " & "-gnatym " & "NOLINE_LENGTH " & "-gnaty-m " & "MODE_IN " & "-gnatyI " & "NOMODE_IN " & "-gnaty-I " & "NONE " & "-gnatyN " & "STANDARD_CASING " & "-gnatyn " & "NOSTANDARD_CASING " & "-gnaty-n " & "ORDERED_SUBPROGRAMS " & "-gnatyo " & "NOORDERED_SUBPROGRAMS " & "-gnaty-o " & "OVERRIDING_INDICATORS " & "-gnatyO " & "NOOVERRIDING_INDICATORS " & "-gnaty-O " & "PRAGMA " & "-gnatyp " & "NOPRAGMA " & "-gnaty-p " & "REFERENCES " & "-gnatyr " & "NOREFERENCES " & "-gnaty-r " & "SPECS " & "-gnatys " & "NOSPECS " & "-gnaty-s " & "STATEMENTS_AFTER_THEN_ELSE " & "-gnatyS " & "NOSTATEMENTS_AFTER_THEN_ELSE " & "-gnaty-S " & "TOKEN " & "-gnatyt " & "NOTOKEN " & "-gnaty-t " & "UNNECESSARY_BLANK_LINES " & "-gnatyu " & "NOUNNECESSARY_BLANK_LINES " & "-gnaty-u " & "XTRA_PARENS " & "-gnaty-x " & "NOXTRA_PARENS " & "-gnaty-x "; -- /NOSTYLE_CHECKS (D) -- /STYLE_CHECKS[=(keyword,[...])] -- -- Normally, GNAT permits any code layout consistent with the reference -- manual requirements. This qualifier imposes style checking on the -- input source code. The following keywords are supported: -- -- ALL_BUILTIN (D) Equivalent to the following list of options: -- 3, ATTRIBUTE, BLANKS, COMMENTS2, END, VTABS, -- HTABS, IF_THEN, KEYWORD, LAYOUT, LINE_LENGTH, -- PRAGMA, REFERENCES, SPECS, TOKEN. -- -- 1 .. 9 Specify indentation level from 1 to 9. -- The general style of required indentation is as -- specified by the examples in the Ada Reference -- Manual. Full line comments must be aligned with -- the -- starting on a column that is a multiple -- of the alignment level. -- -- ATTRIBUTE Check attribute casing. -- Attribute names, including the case of keywords -- such as digits used as attributes names, -- must be written in mixed case, that is, -- the initial letter and any letter following an -- underscore must be uppercase. -- All other letters must be lowercase. -- -- ARRAY_INDEXES Check indexes of array attributes. -- For array attributes First, Last, Range, -- or Length, the index number must be omitted -- for one-dimensional arrays and is required -- for multi-dimensional arrays. -- -- BLANKS Blanks not allowed at statement end. -- Trailing blanks are not allowed at the end of -- statements. The purpose of this rule, together -- with option HTABS (no horizontal tabs), is to -- enforce a canonical format for the use of -- blanks to separate source tokens. -- -- COMMENTS2 Check comments. -- COMMENTS Comments must meet the following set of rules: -- -- * The "--" that starts the column must either -- start in column one, or else at least one -- blank must precede this sequence. -- -- * Comments that follow other tokens on a line -- must have at least one blank following the -- "--" at the start of the comment. -- -- * Full line comments must have two blanks -- following the "--" that starts the comment, -- with the following exceptions. -- -- * A line consisting only of the "--" -- characters, possibly preceded by blanks is -- permitted. -- -- * A comment starting with "--x" where x is -- a special character is permitted. This -- allows proper processing of the output -- generated by specialized tools including -- gnatprep (where --! is used) and the SPARK -- annotation language (where --# is used). -- For the purposes of this rule, a special -- character is defined as being in one of the -- ASCII ranges 16#21#..16#2F# or -- 16#3A#..16#3F#. -- -- * A line consisting entirely of minus signs, -- possibly preceded by blanks, is permitted. -- This allows the construction of box -- comments where lines of minus signs are -- used to form the top and bottom of the box. -- -- * If a comment starts and ends with "--" is -- permitted as long as at least one blank -- follows the initial "--". Together with -- the preceding rule, this allows the -- construction of box comments, as shown in -- the following example: -- -- --------------------------- -- -- This is a box comment -- -- --------------------------- -- -- COMMENTS1 Check comments (single space). -- Like COMMENTS2, but the -- of a comment only -- requires one or more spaces following, instead -- of two or more spaces. -- -- DOS_LINE_ENDINGS Check that no DOS line terminators are present -- All lines must be terminated by a single -- ASCII.LF character. In particular the DOS line -- terminator sequence CR / LF is not allowed). -- -- END Check end/exit labels. -- Optional labels on end statements ending -- subprograms and on exit statements exiting -- named loops, are required to be present. -- -- GNAT Enforces a set of style conventions that -- match the style used in the GNAT source code. -- This maybe useful when developing code that -- is eventually intended to be incorporated into -- GNAT. For further details, see GNAT sources. -- -- HTABS No horizontal tabs. -- Horizontal tab characters are not permitted in -- the source text. Together with the BLANKS -- (no blanks at end of line) option, this -- enforces a canonical form for the use of blanks -- to separate source tokens. -- -- IF_THEN Check if-then layout. -- The keyword then must appear either on the -- same line as the corresponding if, or on a line -- on its own, lined up under the if with at least -- one non-blank line in between containing all or -- part of the condition to be tested. -- -- KEYWORD Check keyword casing. -- All keywords must be in lower case (with the -- exception of keywords such as digits used as -- attribute names to which this check does not -- apply). -- -- LAYOUT Check layout. -- Layout of statement and declaration constructs -- must follow the recommendations in the Ada -- Reference Manual, as indicated by the form of -- the syntax rules. For example an else keyword -- must be lined up with the corresponding if -- keyword. -- -- There are two respects in which the style rule -- enforced by this check option are more liberal -- than those in the Ada Reference Manual. -- First in the case of record declarations, -- it is permissible to put the record keyword on -- the same line as the type keyword, and then -- the end in end record must line up under type. -- For example, either of the following two -- layouts is acceptable: -- -- type q is record -- a : integer; -- b : integer; -- end record; -- -- type q is -- record -- a : integer; -- b : integer; -- end record; -- -- Second, in the case of a block statement, -- a permitted alternative is to put the block -- label on the same line as the declare or begin -- keyword, and then line the end keyword up under -- the block label. For example both the following -- are permitted: -- -- -- -- Block : declare -- A : Integer := 3; -- begin -- Proc (A, A); -- end Block; -- -- Block : -- declare -- A : Integer := 3; -- begin -- Proc (A, A); -- end Block; -- -- The same alternative format is allowed for -- loops. For example, both of the following are -- permitted: -- -- -- -- Clear : while J < 10 loop -- A (J) := 0; -- end loop Clear; -- -- Clear : -- while J < 10 loop -- A (J) := 0; -- end loop Clear; -- -- -- -- LINE_LENGTH Check maximum line length. -- The length of source lines must not exceed 79 -- characters, including any trailing blanks -- The value of 79 allows convenient display on -- an 80 character wide device or window, allowing -- for possible special treatment of 80 character -- lines. -- -- NONE Clear any previously set style checks. -- -- ORDERED_SUBPROGRAMS Check order of subprogram bodies. -- All subprogram bodies in a given scope (e.g. -- a package body) must be in alphabetical order. -- The ordering rule uses normal Ada rules for -- comparing strings, ignoring casing of letters, -- except that if there is a trailing numeric -- suffix, then the value of this suffix is used -- in the ordering (e.g. Junk2 comes before -- Junk10). -- -- OVERRIDING_INDICATORS Check that overriding subprograms are -- explicitly marked as such. The declaration of -- a primitive operation of a type extension that -- overrides an inherited operation must carry -- an overriding indicator. -- -- PRAGMA Check pragma casing. -- Pragma names must be written in mixed case, -- that is, the initial letter and any letter -- following an underscore must be uppercase. -- All other letters must be lowercase. -- -- REFERENCES Check references. -- All identifier references must be cased in the -- same way as the corresponding declaration. -- No specific casing style is imposed on -- identifiers. The only requirement is for -- consistency of references with declarations. -- -- SPECS Check separate specs. -- Separate declarations ("specs") are required -- for subprograms (a body is not allowed to serve -- as its own declaration). The only exception is -- that parameterless library level procedures are -- not required to have a separate declaration. -- This exception covers the most frequent form of -- main program procedures. -- -- STANDARD_CASING Check casing of entities in Standard. -- Any identifier from Standard must be cased to -- match the presentation in the Ada Reference -- Manual (for example, Integer and ASCII.NUL). -- -- TOKEN Check token spacing. -- The following token spacing rules are enforced: -- -- * The keywords abs and not must be followed -- by a space. -- -- * The token => must be surrounded by spaces. -- -- * The token <> must be preceded by a space or -- a left parenthesis. -- -- * Binary operators other than ** must be -- surrounded by spaces. There is no -- restriction on the layout of the ** binary -- operator. -- -- * Colon must be surrounded by spaces. -- -- * Colon-equal (assignment) must be surrounded -- by spaces. -- -- * Comma must be the first non-blank character -- on the line, or be immediately preceded by -- a non-blank character, and must be followed -- by a space. -- -- * If the token preceding a left paren ends -- with a letter or digit, then a space must -- separate the two tokens. -- -- * A right parenthesis must either be the -- first non-blank character on a line, or it -- must be preceded by a non-blank character. -- -- * A semicolon must not be preceded by -- a space, and must not be followed by -- a non-blank character. -- -- * A unary plus or minus may not be followed -- by a space. -- -- * A vertical bar must be surrounded by -- spaces. -- -- In the above rules, appearing in column one is -- always permitted, that is, counts as meeting -- either a requirement for a required preceding -- space, or as meeting a requirement for no -- preceding space. -- -- Appearing at the end of a line is also always -- permitted, that is, counts as meeting either -- a requirement for a following space, -- or as meeting a requirement for no following -- space. -- -- UNNECESSARY_BLANK_LINES -- Check for unnecessary blank lines. -- A blank line is considered unnecessary if it -- appears at the end of the file, or if more -- than one blank line occurs in sequence. -- -- VTABS No form feeds or vertical tabs. -- Form feeds or vertical tab characters are not -- permitted in the source text. -- -- XTRA_PARENS Check for the use of an unnecessary extra -- level of parentheses (C - style) around -- conditions in if statements, while statements -- and exit statements. S_GCC_StyleX : aliased constant S := "/NOSTYLE_CHECKS " & "!-gnatg,!-gnaty*"; -- NODOC (see /STYLE_CHECKS) S_GCC_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_GCC_Symbol : aliased constant S := "/SYMBOL_PREPROCESSING=" & '"' & "-gnateD" & '"'; -- /SYMBOL_PREPROCESSING="symbol=value" -- -- Define or redefine a preprocessing symbol, associated with value. -- If "=value" is not specified, then the value of the symbol is True. -- A symbol is an identifier, following normal Ada (case-insensitive) -- rules for its syntax, and value is any sequence (including an empty -- sequence) of characters from the set (letters, digits, period, -- underline). Ada reserved words may be used as symbols, with the -- exceptions of "if", "else", "elsif", "end", "and", "or" and "then". -- -- A symbol declared with this qualifier on the command line replaces -- a symbol with the same name either in a definition file or specified -- with a switch -D in the preprocessor data file. -- -- This qualifier is similar to qualifier /ASSOCIATE of -- GNAT PREPROCESSING. S_GCC_Syntax : aliased constant S := "/SYNTAX_ONLY " & "-gnats"; -- /NOSYNTAX_ONLY (D) -- /SYNTAX_ONLY -- -- Run GNAT in syntax checking only mode. You can check a series of -- files in a single command, and can use wild cards to specify such a -- group of files. -- -- You may use other qualifiers in conjunction with this qualifier. In -- particular, /LIST and /REPORT_ERRORS=VERBOSE are useful to control the -- format of any generated error messages. -- -- The output is simply the error messages, if any. No object file or ALI -- file is generated by a syntax-only compilation. Also, no units other -- than the one specified are accessed. For example, if a unit "X" with's -- a unit "Y", compiling unit "X" in syntax check only mode does not -- access the source file containing unit "Y". -- -- Normally, GNAT allows only a single unit in a source file. However, -- this restriction does not apply in syntax-check-only mode, and it is -- possible to check a file containing multiple compilation units -- concatenated together. This is primarily used by the GNAT CHOP -- command. S_GCC_Table : aliased constant S := "/TABLE_MULTIPLIER=#" & "-gnatT#"; -- /TABLE_MULTIPLIER=nnn -- -- All compiler tables start at nnn times usual starting size. S_GCC_Trace : aliased constant S := "/TRACE_UNITS " & "-gnatdc"; -- /TRACE_UNITS -- /NOTRACE_UNITS -- -- This switch that does for the frontend what /VERBOSE does for the -- backend. The system prints the name of each unit, either a compilation -- unit or nested unit, as it is being analyzed. S_GCC_Tree : aliased constant S := "/TREE_OUTPUT " & "-gnatt"; -- /TREE_OUTPUT -- /NOTREE_OUTPUT -- -- Cause GNAT to write the internal tree for a unit to a file (with the -- filetype ATB for a body or ATS for a spec). This is not normally -- required, but is used by separate analysis tools. Typically these -- tools do the necessary compilations automatically, so you should never -- have to specify this switch in normal operation. S_GCC_Trys : aliased constant S := "/TRY_SEMANTICS " & "-gnatq"; -- /TRY_SEMANTICS -- /NOTRY_SEMANTICS -- -- In normal operation mode the compiler first parses the program and -- determines if there are any syntax errors. If there are, appropriate -- error messages are generated and compilation is immediately -- terminated. This qualifier tells GNAT to continue with semantic -- analysis even if syntax errors have been found. This may enable the -- detection of more errors in a single run. On the other hand, the -- semantic analyzer is more likely to encounter some internal fatal -- error when given a syntactically invalid tree. S_GCC_USL : aliased constant S := "/UNCHECKED_SHARED_LIB_IMPORTS " & "--unchecked-shared-lib-imports"; -- /NOUNCHECKED_SHARED_LIB_IMPORTS (D) -- /UNCHECKED_SHARED_LIB_IMPORTS -- -- Allow shared library projects to import static library projects S_GCC_Units : aliased constant S := "/UNITS_LIST " & "-gnatu"; -- /NOUNITS_LIST (D) -- /UNITS_LIST -- -- Print a list of units required by this compilation on SYS$OUTPUT. The -- listing includes all units on which the unit being compiled depends -- either directly or indirectly. S_GCC_Unique : aliased constant S := "/UNIQUE_ERROR_TAG " & "-gnatU"; -- /NOUNIQUE_ERROR_TAG (D) -- /UNIQUE_ERROR_TAG -- -- Tag compiler error messages with the string "error: ". S_GCC_Upcase : aliased constant S := "/UPPERCASE_EXTERNALS " & "-gnatF"; -- /NOUPPERCASE_EXTERNALS (D) -- /UPPERCASE_EXTERNALS -- -- Fold default and explicit external names in pragmas Import and Export -- to uppercase for compatibility with the default behavior of DEC C. S_GCC_Valid : aliased constant S := "/VALIDITY_CHECKING=" & "DEFAULT " & "-gnatVd " & "NODEFAULT " & "-gnatVD " & "COPIES " & "-gnatVc " & "NOCOPIES " & "-gnatVC " & "COMPONENTS " & "-gnatVe " & "NOCOMPONENTS " & "-gnatVE " & "FLOATS " & "-gnatVf " & "NOFLOATS " & "-gnatVF " & "IN_PARAMS " & "-gnatVi " & "NOIN_PARAMS " & "-gnatVI " & "MOD_PARAMS " & "-gnatVm " & "NOMOD_PARAMS " & "-gnatVM " & "OPERANDS " & "-gnatVo " & "NOOPERANDS " & "-gnatVO " & "PARAMETERS " & "-gnatVp " & "NOPARAMETERS " & "-gnatVP " & "RETURNS " & "-gnatVr " & "NORETURNS " & "-gnatVR " & "SUBSCRIPTS " & "-gnatVs " & "NOSUBSCRIPTS " & "-gnatVS " & "TESTS " & "-gnatVt " & "NOTESTS " & "-gnatVT " & "ALL " & "-gnatVa " & "NONE " & "-gnatVn"; -- /VALIDITY_CHECKING[=(keyword,[...])] -- -- Control level of validity checking. -- -- DEFAULT (D) In this mode checks are made to prevent -- erroneous behavior in accordance with the RM. -- Notably extra checks may be needed for case -- statements and subscripted array assignments. -- -- NONE No special checks for invalid values are -- performed. This means that references to -- uninitialized variables can cause erroneous -- behavior from constructs like case statements -- and subscripted array assignments. In this -- mode, invalid values can lead to erroneous -- behavior. -- -- FULL Every assignment is checked for validity, so -- that it is impossible to assign invalid values. -- The RM specifically allows such assignments, -- but in this mode, invalid values can never be -- assigned, and an attempt to perform such an -- assignment immediately raises Constraint_Error. -- This behavior is allowed (but not required) by -- the RM. This mode is intended as a debugging aid, -- and may be useful in helping to track down -- uninitialized variables. It may be useful to -- use this in conjunction with the Normalize_Scalars -- pragma which attempts to initialize with invalid -- values where possible. S_GCC_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /VERBOSE -- /NOVERBOSE -- -- Show commands generated by the GCC driver. Normally used only for -- debugging purposes or if you need to be sure what version of the -- compiler you are executing. S_GCC_Verb_Asm : aliased constant S := "/VERBOSE_ASM " & "-S,-verbose_asm,!-c"; -- /NOASM (D) -- /ASM -- -- Use to cause the assembler source file to be generated, using S as the -- filetype, instead of the object file. This may be useful if you need -- to examine the generated assembly code. S_GCC_Warn : aliased constant S := "/WARNINGS=" & "DEFAULT " & "!-gnatws,!-gnatwe " & "ALL " & "-gnatwa " & "EVERY " & "-gnatw.e " & "OPTIONAL " & "-gnatwa " & "NOOPTIONAL " & "-gnatwA " & "NOALL " & "-gnatwA " & "ALL_GCC " & "-Wall " & "FAILING_ASSERTIONS " & "-gnatw.a " & "NO_FAILING_ASSERTIONS " & "-gnatw.A " & "BAD_FIXED_VALUES " & "-gnatwb " & "NO_BAD_FIXED_VALUES " & "-gnatwB " & "BIASED_REPRESENTATION " & "-gnatw.b " & "NO_BIASED_REPRESENTATION " & "-gnatw.B " & "CONDITIONALS " & "-gnatwc " & "NOCONDITIONALS " & "-gnatwC " & "MISSING_COMPONENT_CLAUSES " & "-gnatw.c " & "NOMISSING_COMPONENT_CLAUSES " & "-gnatw.C " & "IMPLICIT_DEREFERENCE " & "-gnatwd " & "NO_IMPLICIT_DEREFERENCE " & "-gnatwD " & "ERRORS " & "-gnatwe " & "UNREFERENCED_FORMALS " & "-gnatwf " & "NOUNREFERENCED_FORMALS " & "-gnatwF " & "UNRECOGNIZED_PRAGMAS " & "-gnatwg " & "NOUNRECOGNIZED_PRAGMAS " & "-gnatwG " & "HIDING " & "-gnatwh " & "NOHIDING " & "-gnatwH " & "AVOIDGAPS " & "-gnatw.h " & "NOAVOIDGAPS " & "-gnatw.H " & "IMPLEMENTATION " & "-gnatwi " & "NOIMPLEMENTATION " & "-gnatwI " & "OBSOLESCENT " & "-gnatwj " & "NOOBSOLESCENT " & "-gnatwJ " & "CONSTANT_VARIABLES " & "-gnatwk " & "NOCONSTANT_VARIABLES " & "-gnatwK " & "ELABORATION " & "-gnatwl " & "NOELABORATION " & "-gnatwL " & "MODIFIED_UNREF " & "-gnatwm " & "NOMODIFIED_UNREF " & "-gnatwM " & "SUSPICIOUS_MODULUS " & "-gnatw.m " & "NOSUSPICIOUS_MODULUS " & "-gnatw.M " & "NORMAL " & "-gnatwn " & "OVERLAYS " & "-gnatwo " & "NOOVERLAYS " & "-gnatwO " & "OUT_PARAM_UNREF " & "-gnatw.o " & "NOOUT_PARAM_UNREF " & "-gnatw.O " & "INEFFECTIVE_INLINE " & "-gnatwp " & "NOINEFFECTIVE_INLINE " & "-gnatwP " & "MISSING_PARENS " & "-gnatwq " & "PARAMETER_ORDER " & "-gnatw.p " & "NOPARAMETER_ORDER " & "-gnatw.P " & "NOMISSING_PARENS " & "-gnatwQ " & "REDUNDANT " & "-gnatwr " & "NOREDUNDANT " & "-gnatwR " & "OBJECT_RENAMES " & "-gnatw.r " & "NOOBJECT_RENAMES " & "-gnatw.R " & "SUPPRESS " & "-gnatws " & "OVERRIDING_SIZE " & "-gnatw.s " & "NOOVERRIDING_SIZE " & "-gnatw.S " & "DELETED_CODE " & "-gnatwt " & "NODELETED_CODE " & "-gnatwT " & "UNINITIALIZED " & "-Wuninitialized " & "UNUSED " & "-gnatwu " & "NOUNUSED " & "-gnatwU " & "UNORDERED_ENUMERATIONS " & "-gnatw.u " & "NOUNORDERED_ENUMERATIONS " & "-gnatw.U " & "VARIABLES_UNINITIALIZED " & "-gnatwv " & "NOVARIABLES_UNINITIALIZED " & "-gnatwV " & "REVERSE_BIT_ORDER " & "-gnatw.v " & "NOREVERSE_BIT_ORDER " & "-gnatw.V " & "LOWBOUND_ASSUMED " & "-gnatww " & "NOLOWBOUND_ASSUMED " & "-gnatwW " & "WARNINGS_OFF_PRAGMAS " & "-gnatw.w " & "NO_WARNINGS_OFF_PRAGMAS " & "-gnatw.W " & "IMPORT_EXPORT_PRAGMAS " & "-gnatwx " & "NOIMPORT_EXPORT_PRAGMAS " & "-gnatwX " & "LOCAL_RAISE_HANDLING " & "-gnatw.x " & "NOLOCAL_RAISE_HANDLING " & "-gnatw.X " & "ADA_2005_COMPATIBILITY " & "-gnatwy " & "NOADA_2005_COMPATIBILITY " & "-gnatwY " & "UNCHECKED_CONVERSIONS " & "-gnatwz " & "NOUNCHECKED_CONVERSIONS " & "-gnatwZ"; -- /NOWARNINGS -- -- Suppress the output of all warning messages from the GNAT front end. -- Note that it does not suppress warnings from the gcc back end. -- -- /WARNINGS[=(keyword[,...])] -- -- In addition to error messages, corresponding to illegalities as -- defined in the reference manual, the compiler detects two kinds of -- warning situations. First, the compiler considers some constructs -- suspicious and generates a warning message to alert you to a possible -- error. Second, if the compiler detects a situation that is sure to -- raise an exception at runtime, it generates a warning message. -- -- You may specify the following keywords to change this behavior: -- -- DEFAULT (D) The default behavior above. -- -- ALL Activate all optional warnings. -- Activates most optional warning messages, -- see remaining list in this section for -- details on optional warning messages that -- can be individually controlled. -- The warnings that are not turned on by -- this option are BIASED_ROUNDING, -- IMPLICIT_DEREFERENCE, HIDING and -- ELABORATION. All other optional Ada -- warnings are turned on. -- -- EVERY Activate every optional warning. -- Activates all optional warnings, including -- those listed above as exceptions for ALL. -- -- NOALL Suppress all optional errors. -- Suppresses all optional warning messages -- that can be activated by option ALL. -- -- ALL_GCC Request additional messages from the GCC -- backend. Most of these are not relevant -- to Ada. -- -- CONDITIONALS Activate warnings for conditional -- Expressions used in tests that are known -- to be True or False at compile time. The -- default is that such warnings are not -- generated. -- -- NOCONDITIONALS Suppress warnings for conditional -- expressions used in tests that are known -- to be True or False at compile time. -- -- IMPLICIT_DEREFERENCE Activate warnings on implicit dereferencing. -- The use of a prefix of an access type in an -- indexed component, slice, or selected component -- without an explicit .all will generate -- a warning. With this warning enabled, access -- checks occur only at points where an explicit -- .all appears in the source code (assuming no -- warnings are generated as a result of this -- option). The default is that such warnings are -- not generated. Note that /WARNINGS=ALL does not -- affect the setting of this warning option. -- -- NOIMPLICIT_DEREFERENCE Suppress warnings on implicit dereferencing. -- in indexed components, slices, and selected -- components. -- -- ELABORATION Activate warnings on missing pragma -- Elaborate_All statements. The default is -- that such warnings are not generated. -- -- NOELABORATION Suppress warnings on missing pragma -- Elaborate_All statements. -- -- ERRORS Warning messages are to be treated as errors. -- The warning string still appears, but the -- warning messages are counted as errors, and -- prevent the generation of an object file. -- -- HIDING Activate warnings on hiding declarations. -- A declaration is considered hiding if it is -- for a non-overloadable entity, and it declares -- an entity with the same name as some other -- entity that is directly or use-visible. The -- default is that such warnings are not -- generated. -- -- NOHIDING Suppress warnings on hiding declarations. -- -- IMPLEMENTATION Activate warnings for a with of an internal -- GNAT implementation unit, defined as any unit -- from the Ada, Interfaces, GNAT, DEC or -- System hierarchies that is not documented in -- either the Ada Reference Manual or the GNAT -- Programmer's Reference Manual. Such units are -- intended only for internal implementation -- purposes and should not be with'ed by user -- programs. The default is that such warnings -- are generated. -- -- NOIMPLEMENTATION Disables warnings for a with of an internal -- GNAT implementation unit. -- -- INEFFECTIVE_INLINE Activate warnings on ineffective pragma Inlines -- Activates warnings for failure of front end -- inlining (activated by /INLINE=FULL) to inline -- a particular call. There are many reasons for -- not being able to inline a call, including most -- commonly that the call is too complex to -- inline. This warning can also be turned on -- using /INLINE=FULL. -- -- NOINEFFECTIVE_INLINE Suppress warnings on ineffective pragma Inlines -- Suppresses warnings on ineffective pragma -- Inlines. If the inlining mechanism cannot -- inline a call, it will simply ignore the -- request silently. -- -- MISSING_COMPONENT_CLAUSES -- Activate warnings for cases when there are -- component clauses for a record type, but not -- for every component of the record. -- -- NOMISSING_COMPONENT_CLAUSES -- Suppress warnings for cases when there are -- missing component clauses for a record type. -- -- MISSING_PARENS -- Activate warnings for cases where parentheses -- are not used and the result is potential -- ambiguity from a reader's point of view. -- For example (not a > b) when a and b are -- modular means (not (a) > b) and very likely -- the programmer intended (not (a > b)). -- -- NOMISSING_PARENS -- Suppress warnings for cases where parentheses -- are not used and the result is potential -- ambiguity from a reader's point of view. -- -- MODIFIED_UNREF Activates warnings for variables that are -- assigned (using an initialization value or with -- one or more assignment statements) but whose -- value is never read. The warning is suppressed -- for volatile variables and also for variables -- that are renamings of other variables or for -- which an address clause is given. This warning -- can also be turned on using /WARNINGS/OPTIONAL. -- -- NOMODIFIED_UNREF Disables warnings for variables that are -- assigned or initialized, but never read. -- -- NORMAL Sets normal warning mode, in which enabled -- warnings are issued and treated as warnings -- rather than errors. This is the default mode. -- It can be used to cancel the effect of an -- explicit /WARNINGS=SUPPRESS or -- /WARNINGS=ERRORS. It also cancels the effect -- of the implicit /WARNINGS=ERRORS that is -- activated by the use of /STYLE=GNAT. -- -- OBSOLESCENT Activates warnings for calls to subprograms -- marked with pragma Obsolescent and for use of -- features in Annex J of the Ada Reference -- Manual. In the case of Annex J, not all -- features are flagged. In particular use of the -- renamed packages (like Text_IO), use of package -- ASCII and use of the attribute 'Constrained are -- not flagged, since these are very common and -- would generate many annoying positive warnings. -- The default is that such warnings are not -- generated. -- -- NOOBSOLESCENT Disables warnings on use of obsolescent -- features. -- -- OBJECT_RENAME Activate warnings for non limited objects -- renaming parameterless functions. -- -- NOOBJECT_RENAME Suppress warnings for non limited objects -- renaming parameterless functions. -- -- OPTIONAL Equivalent to ALL. -- -- NOOPTIONAL Equivalent to NOALL. -- -- OVERLAYS Activate warnings for possibly unintended -- initialization effects of defining address -- clauses that cause one variable to overlap -- another. The default is that such warnings -- are generated. -- -- NOOVERLAYS Suppress warnings on possibly unintended -- initialization effects of defining address -- clauses that cause one variable to overlap -- another. -- -- REDUNDANT Activate warnings for redundant constructs. -- In particular assignments of a variable to -- itself, and a type conversion that converts -- an object to its own type. The default -- is that such warnings are not generated. -- -- NOREDUNDANT Suppress warnings for redundant constructs. -- -- SUPPRESS Completely suppress the output of all warning -- messages. Same as /NOWARNINGS. -- -- UNCHECKED_CONVERSIONS Activates warnings on unchecked conversions. -- Causes warnings to be generated for -- unchecked conversions when the two types are -- known at compile time to have different sizes. -- The default is that such warnings are -- generated. -- -- NOUNCHECKED_CONVERSIONS Suppress warnings for unchecked conversions. -- -- UNINITIALIZED Generate warnings for uninitialized variables. -- This is a GCC option, not an Ada option. -- You must also specify the /OPTIMIZE qualifier -- with a value other than NONE (in other words, -- this keyword works only if optimization is -- turned on). -- -- UNREFERENCED_FORMALS Activate warnings on unreferenced formals. -- Causes a warning to be generated if a formal -- parameter is not referenced in the body of -- the subprogram. This warning can also be turned -- on using option ALL or UNUSED. -- -- NOUNREFERENCED_FORMALS Suppress warnings on unreferenced formals. -- Suppresses warnings for unreferenced formal -- parameters. Note that the combination UNUSED -- followed by NOUNREFERENCED_FORMALS has the -- effect of warning on unreferenced entities -- other than subprogram formals. -- -- UNUSED Activates warnings to be generated for entities -- that are defined but not referenced, and for -- units that are with'ed and not referenced. In -- the case of packages, a warning is also -- generated if no entities in the package are -- referenced. This means that if the package -- is referenced but the only references are in -- use clauses or renames declarations, a warning -- is still generated. A warning is also generated -- for a generic package that is with'ed but never -- instantiated. In the case where a package or -- subprogram body is compiled, and there is a -- with on the corresponding spec that is only -- referenced in the body, a warning is also -- generated, noting that the with can be moved -- to the body. The default is that such warnings -- are not generated. -- -- NOUNUSED Suppress warnings for unused entities and -- packages. -- -- VARIABLES_UNINITIALIZED Activates warnings on unassigned variables. -- Causes warnings to be generated when a variable -- is accessed which may not be properly -- uninitialized. -- The default is that such warnings are -- generated. -- -- NOVARIABLES_UNINITIALIZED Suppress warnings for uninitialized -- variables. S_GCC_WarnX : aliased constant S := "/NOWARNINGS " & "-gnatws"; -- NODOC (see /WARNINGS) S_GCC_No_Back : aliased constant S := "/NO_BACK_END_WARNINGS " & "-w"; -- /NO_BACK_END_WARNINGS -- -- Inhibit all warning messages of the GCC back-end. S_GCC_Wide : aliased constant S := "/WIDE_CHARACTER_ENCODING=" & "BRACKETS " & "-gnatWb " & "HEX " & "-gnatWh " & "UPPER " & "-gnatWu " & "SHIFT_JIS " & "-gnatWs " & "UTF8 " & "-gnatW8 " & "EUC " & "-gnatWe"; -- /NOWIDE_CHARACTER_ENCODING (D) -- /WIDE_CHARACTER_ENCODING[=encode-type] -- -- Specifies the mechanism used to encode wide characters. 'encode-type' -- is one of the following: -- -- BRACKETS (D) A wide character is encoded as ["xxxx"] where XXXX -- are four hexadecimal digits representing the coding -- ('Pos value) of the character in type -- Wide_Character. The hexadecimal digits may use upper -- or lower case letters. -- -- This notation can also be used for upper half -- Character values using the format ["xx"] where XX is -- two hexadecimal digits representing the coding ('Pos -- value) of the character in type Character (or -- Wide_Character). The hexadecimal digits may use upper -- of lower case. -- -- NONE No wide characters are allowed. Same -- as /NOWIDE_CHARACTER_ENCODING. -- -- HEX In this encoding, a wide character is represented by -- the following five character sequence: ESC a b c d -- Where 'a', 'b', 'c', and 'd' are the four hexadecimal -- characters (using uppercase letters) of the wide -- character code. For example, ESC A345 is used to -- represent the wide character with code 16#A345#. This -- scheme is compatible with use of the full -- Wide_Character set. -- -- UPPER The wide character with encoding 16#abcd# where the -- upper bit is on (in other words, "a" is in the range -- 8-F) is represented as two bytes, 16#ab# and 16#cd#. -- The second byte may never be a format control -- character, but is not required to be in the upper -- half. This method can be also used for shift-JIS or -- EUC, where the internal coding matches the external -- coding. -- -- SHIFT_JIS A wide character is represented by a two-character -- sequence, 16#ab# and 16#cd#, with the restrictions -- described for upper-half encoding as described above. -- The internal character code is the corresponding JIS -- character according to the standard algorithm for -- Shift-JIS conversion. Only characters defined in the -- JIS code set table can be used with this encoding -- method. -- -- UTF8 A wide character is represented using -- UCS Transformation Format 8 (UTF-8) as defined in Annex -- R of ISO 10646-1/Am.2. Depending on the character -- value, the representation is a one, two, or three byte -- sequence: -- -- 16#0000#-16#007f#: 2#0xxxxxxx# -- 16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx# -- 16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx# -- -- where the xxx bits correspond to the left-padded bits -- of the 16-bit character value. Note that all lower -- half ASCII characters are represented as ASCII bytes -- and all upper half characters and other wide characters -- are represented as sequences of upper-half (The full -- UTF-8 scheme allows for encoding 31-bit characters as -- 6-byte sequences, but in this implementation, all UTF-8 -- sequences of four or more bytes length will be treated -- as illegal). -- -- EUC A wide character is represented by a two-character -- sequence 16#ab# and 16#cd#, with both characters being -- in the upper half. The internal character code is the -- corresponding JIS character according to the EUC -- encoding algorithm. Only characters defined in the JIS -- code set table can be used with this encoding method. S_GCC_WideX : aliased constant S := "/NOWIDE_CHARACTER_ENCODING " & "-gnatWn"; -- NODOC (see /WIDE_CHARACTER_ENCODING) S_GCC_Xdebug : aliased constant S := "/XDEBUG " & "-gnatD"; -- /NOXDEBUG (D) -- /XDEBUG -- -- Output expanded source files for source level debugging. -- The expanded source (see /EXPAND_SOURCE) is written to files -- with names formed by appending "_DG" to the input file name, -- The debugging information generated by the /DEBUG qualifier will then -- refer to the generated file. This allows source level debugging using -- the generated code which is sometimes useful for complex code, for -- example to find out exactly which part of a complex construction -- raised an exception. The maximum line length for the output is 72. S_GCC_Lxdebug : aliased constant S := "/LXDEBUG=#" & "-gnatD=#"; -- /LXDEBUG=nnn -- -- Output expanded source files for source level debugging. -- The expanded source (see /EXPAND_SOURCE) is written to files -- with names formed by appending "_DG" to the input file name, -- The debugging information generated by the /DEBUG qualifier will then -- refer to the generated file. This allows source level debugging using -- the generated code which is sometimes useful for complex code, for -- example to find out exactly which part of a complex construction -- raised an exception. The parameter is the maximum line length for -- the output. S_GCC_Xref : aliased constant S := "/XREF=" & "GENERATE " & "!-gnatx " & "SUPPRESS " & "-gnatx"; -- /XREF[=keyword] -- -- Normally the compiler generates full cross-referencing information in -- the .ALI file. This information is used by a number of tools, -- including GNAT FIND and GNAT XREF. -- -- GENERATE (D) Generate cross-referencing information. -- -- SUPPRESS Suppress cross-referencing information. -- This saves some space and may slightly -- speed up compilation, but means that some -- tools cannot be used. GCC_Switches : aliased constant Switches := (S_GCC_Ada_83 'Access, S_GCC_Ada_95 'Access, S_GCC_Ada_05 'Access, S_GCC_Ada_2005'Access, S_GCC_Ada_12 'Access, S_GCC_Ada_2012'Access, S_GCC_Add 'Access, S_GCC_Asm 'Access, S_GCC_AValid 'Access, S_GCC_CategW 'Access, S_GCC_Checks 'Access, S_GCC_ChecksX 'Access, S_GCC_Compres 'Access, S_GCC_Config 'Access, S_GCC_Current 'Access, S_GCC_Debug 'Access, S_GCC_DebugX 'Access, S_GCC_Data 'Access, S_GCC_Dist 'Access, S_GCC_DistX 'Access, S_GCC_Error 'Access, S_GCC_ErrorX 'Access, S_GCC_Expand 'Access, S_GCC_Lexpand 'Access, S_GCC_Except 'Access, S_GCC_Extend 'Access, S_GCC_Ext 'Access, S_GCC_File 'Access, S_GCC_Follow 'Access, S_GCC_Force 'Access, S_GCC_Full 'Access, S_GCC_Generate'Access, S_GCC_GNAT 'Access, S_GCC_Help 'Access, S_GCC_Ident 'Access, S_GCC_IdentX 'Access, S_GCC_Ignore 'Access, S_GCC_Immed 'Access, S_GCC_Inline 'Access, S_GCC_InlineX 'Access, S_GCC_Intsrc 'Access, S_GCC_Just 'Access, S_GCC_JustX 'Access, S_GCC_Length 'Access, S_GCC_List 'Access, S_GCC_Output 'Access, S_GCC_Machine 'Access, S_GCC_Mapping 'Access, S_GCC_Multi 'Access, S_GCC_Mess 'Access, S_GCC_Nesting 'Access, S_GCC_Noadc 'Access, S_GCC_Noload 'Access, S_GCC_Nostinc 'Access, S_GCC_Nostlib 'Access, S_GCC_NoWarnP 'Access, S_GCC_Opt 'Access, S_GCC_OptX 'Access, S_GCC_Pointer 'Access, S_GCC_Polling 'Access, S_GCC_Project 'Access, S_GCC_Psta 'Access, S_GCC_Report 'Access, S_GCC_ReportX 'Access, S_GCC_Repinfo 'Access, S_GCC_RepinfX 'Access, S_GCC_RTS 'Access, S_GCC_SCO 'Access, S_GCC_Search 'Access, S_GCC_Src_Info'Access, S_GCC_Style 'Access, S_GCC_StyleX 'Access, S_GCC_Subdirs 'Access, S_GCC_Symbol 'Access, S_GCC_Syntax 'Access, S_GCC_Table 'Access, S_GCC_Trace 'Access, S_GCC_Tree 'Access, S_GCC_Trys 'Access, S_GCC_USL 'Access, S_GCC_Units 'Access, S_GCC_Unique 'Access, S_GCC_Upcase 'Access, S_GCC_Valid 'Access, S_GCC_Verbose 'Access, S_GCC_Verb_Asm'Access, S_GCC_Warn 'Access, S_GCC_WarnX 'Access, S_GCC_Wide 'Access, S_GCC_WideX 'Access, S_GCC_No_Back 'Access, S_GCC_Xdebug 'Access, S_GCC_Lxdebug 'Access, S_GCC_Xref 'Access); ---------------------------- -- Switches for GNAT ELIM -- ---------------------------- S_Elim_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Elim_All : aliased constant S := "/ALL " & "-a"; -- /NOALL (D) -- /ALL -- -- Also look for subprograms from the GNAT run time that can be -- eliminated. Note that when 'gnat.adc' is produced using this switch, -- the entire program must be recompiled with qualifier /ALL_FILES of -- GNAT MAKE. S_Elim_Bind : aliased constant S := "/BIND_FILE=<" & "-b>"; -- /BIND_FILE=file_name -- -- Specifies file_name as the bind file to process. If this qualifier is -- not used, the name of the bind file is computed from the full expanded -- Ada name of a main subprogram. S_Elim_Comp : aliased constant S := "/COMPILER=@" & "--GCC=@"; -- /COMPILER=path_name -- -- Instructs GNAT ELIM to use a specific gcc compiler instead of one -- available on the path. S_Elim_Config : aliased constant S := "/CONFIGURATION_PRAGMAS=<" & "-C>"; -- /CONFIGURATION_PRAGMAS=path_name -- -- Specifies a file that contains configuration pragmas. -- The file must be specified with absolute path. S_Elim_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- /NOCURRENT_DIRECTORY -- -- Look for source files in the default directory. S_Elim_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Elim_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Elim_GNATMAKE : aliased constant S := "/GNATMAKE=@" & "--GNATMAKE=@"; -- /GNATMAKE=path_name -- -- Instructs GNAT MAKE to use a specific gnatmake instead of one available -- on the path. S_Elim_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Elim_Nodisp : aliased constant S := "/NO_DISPATCH " & "--no-elim-dispatch"; -- /NONO_DISPATCH (D) -- /NO_DISPATCH -- -- Do not generate pragmas for dispatching operations. S_Elim_Ignore : aliased constant S := "/IGNORE=@" & "--ignore=@"; -- /IGNORE=filename -- -- Do not generate pragmas for subprograms declared in the sources -- listed in a specified file S_Elim_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- gnatelim. The source directories to be searched will be communicated -- to gnatelim through logical name ADA_PRJ_INCLUDE_FILE. S_Elim_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Quiet mode: by default GNAT ELIM outputs to the standard error stream -- the number of program units left to be processed. This option turns -- this trace off. S_Elim_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_Elim_Log : aliased constant S := "/LOG " & "-l"; -- /NOLOG (D) -- /LOG -- -- Duplicate all the output sent to Stderr into a default log file. S_Elim_Logfile : aliased constant S := "/LOGFILE=@" & "-l@"; -- /LOGFILE=logfilename -- -- Duplicate all the output sent to Stderr into a specified log file. S_Elim_Main : aliased constant S := "/MAIN=@" & "-main=@"; -- /MAIN=filename -- -- Specify the main subprogram of the partition to analyse. S_Elim_Out : aliased constant S := "/OUTPUT=@" & "-o@"; -- /OUTPUT=filename -- -- Specify the name of the output file. S_Elim_Time : aliased constant S := "/TIME " & "-t"; -- /NOTIME (D) -- /TIME -- -- Print out execution time S_Elim_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory, ...) -- -- When looking for source files also look in the specified directories. S_Elim_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Elim_Verb : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Verbose mode: GNAT ELIM version information is output as Ada comments -- to the standard output stream. Also, in addition to the number of -- program units left, GNAT ELIM will output the name of the current unit -- being processed. S_Elim_Warn : aliased constant S := "/WARNINGS=" & "NORMAL " & "-wn " & "QUIET " & "-ws"; -- /WARNINGS[=(keyword[,...])] -- -- The following keywords are supported: -- -- NORMAL (D) Print warning all the messages. -- QUIET Some warning messages are suppressed Elim_Switches : aliased constant Switches := (S_Elim_Add 'Access, S_Elim_All 'Access, S_Elim_Bind 'Access, S_Elim_Comp 'Access, S_Elim_Config 'Access, S_Elim_Current 'Access, S_Elim_Ext 'Access, S_Elim_Files 'Access, S_Elim_Follow 'Access, S_Elim_GNATMAKE'Access, S_Elim_Log 'Access, S_Elim_Logfile 'Access, S_Elim_Main 'Access, S_Elim_Mess 'Access, S_Elim_Nodisp 'Access, S_Elim_Out 'Access, S_Elim_Project 'Access, S_Elim_Quiet 'Access, S_Elim_Search 'Access, S_Elim_Subdirs 'Access, S_Elim_Time 'Access, S_Elim_Verb 'Access, S_Elim_Warn 'Access); ---------------------------- -- Switches for GNAT FIND -- ---------------------------- S_Find_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Find_All : aliased constant S := "/ALL_FILES " & "-a"; -- /NOALL_FILES (D) -- /ALL_FILES -- -- If this switch is present, FIND and XREF will parse the read-only -- files found in the library search path. Otherwise, these files will -- be ignored. This option can be used to protect Gnat sources or your -- own libraries from being parsed, thus making FIND and XREF much -- faster, and their output much smaller. S_Find_Deriv : aliased constant S := "/DERIVED_TYPE_INFORMATION " & "-d"; -- /NODERIVED_TYPE_INFORMATION (D) -- /DERIVED_TYPE_INFORMATION -- -- Output the parent type reference for each matching derived types. S_Find_Expr : aliased constant S := "/EXPRESSIONS " & "-e"; -- /NOEXPRESSIONS (D) -- /EXPRESSIONS -- -- By default, FIND accepts the simple regular expression set for pattern. -- If this switch is set, then the pattern will be considered as a full -- Unix-style regular expression. S_Find_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Find_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Find_Full : aliased constant S := "/FULL_PATHNAME " & "-f"; -- /NOFULL_PATHNAME (D) -- /FULL_PATHNAME -- -- If this switch is set, the output file names will be preceded by their -- directory (if the file was found in the search path). If this switch -- is not set, the directory will not be printed. S_Find_Ignore : aliased constant S := "/IGNORE_LOCALS " & "-g"; -- /NOIGNORE_LOCALS (D) -- /IGNORE_LOCALS -- -- If this switch is set, information is output only for library-level -- entities, ignoring local entities. The use of this switch may -- accelerate FIND and XREF. S_Find_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Find_Nostinc : aliased constant S := "/NOSTD_INCLUDES " & "-nostdinc"; -- /NOSTD_INCLUDES -- -- Do not look for sources in the system default directory. S_Find_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " & "-nostdlib"; -- /NOSTD_LIBRARIES -- -- Do not look for library files in the system default directory. S_Find_Object : aliased constant S := "/OBJECT_SEARCH=*" & "-aO*"; -- /OBJECT_SEARCH=(directory,...) -- -- When searching for library and object files, look in the specified -- directories. The order in which library files are searched is the same -- as for MAKE. S_Find_Print : aliased constant S := "/PRINT_LINES " & "-s"; -- /NOPRINT_LINES (D) -- /PRINT_LINES -- -- Output the content of the Ada source file lines were the entity was -- found. S_Find_Project : aliased constant S := "/PROJECT=@" & "-p@"; -- /PROJECT=file -- -- Specify a project file to use. By default, FIND and XREF will try to -- locate a project file in the current directory. -- -- If a project file is either specified or found by the tools, then the -- content of the source directory and object directory lines are added -- as if they had been specified respectively by /SOURCE_SEARCH and -- /OBJECT_SEARCH. -- -- This qualifier is not compatible with /PROJECT_FILE S_Find_Prj : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before looking for sources. -- The source and object directories to be searched will be communicated -- to gnatfind through logical names ADA_PRJ_INCLUDE_FILE and -- ADA_PRJ_OBJECTS_FILE. S_Find_Ref : aliased constant S := "/REFERENCES " & "-r"; -- /NOREFERENCES (D) -- /REFERENCES -- -- By default, FIND will output only the information about the -- declaration, body or type completion of the entities. If this switch -- is set, the FIND will locate every reference to the entities in the -- files specified on the command line (or in every file in the search -- path if no file is given on the command line). S_Find_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory,...) -- -- Equivalent to: -- /OBJECT_SEARCH=(directory,...) /SOURCE_SEARCH=(directory,...) S_Find_Source : aliased constant S := "/SOURCE_SEARCH=*" & "-aI*"; -- /SOURCE_SEARCH=(directory,...) -- -- When looking for source files also look in the specified directories. -- The order in which source file search is undertaken is the same as for -- MAKE. S_Find_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Find_Types : aliased constant S := "/TYPE_HIERARCHY " & "-t"; -- /NOTYPE_HIERARCHY (D) -- /TYPE_HIERARCHY -- -- Output the type hierarchy for the specified type. It acts like the -- /DERIVED_TYPE_INFORMATION qualifier, but recursively from parent type -- to parent type. When this qualifier is specified it is not possible to -- specify more than one file. Find_Switches : aliased constant Switches := (S_Find_Add 'Access, S_Find_All 'Access, S_Find_Deriv 'Access, S_Find_Expr 'Access, S_Find_Ext 'Access, S_Find_Follow 'Access, S_Find_Full 'Access, S_Find_Ignore 'Access, S_Find_Mess 'Access, S_Find_Nostinc 'Access, S_Find_Nostlib 'Access, S_Find_Object 'Access, S_Find_Print 'Access, S_Find_Project 'Access, S_Find_Prj 'Access, S_Find_Ref 'Access, S_Find_Search 'Access, S_Find_Source 'Access, S_Find_Subdirs 'Access, S_Find_Types 'Access); ------------------------------ -- Switches for GNAT KRUNCH -- ------------------------------ S_Krunch_Count : aliased constant S := "/COUNT=#" & "`#"; -- /COUNT=39 (D) -- /COUNT=nnn -- -- Limit file names to nnn characters (where nnn is a decimal -- integer). The maximum file name length is 39, but if you want to -- generate a set of files that would be usable if ported to a system -- with some different maximum file length, then a different value can -- be specified. Krunch_Switches : aliased constant Switches := (1 .. 1 => S_Krunch_Count 'Access); ---------------------------- -- Switches for GNAT LINK -- ---------------------------- S_Link_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Link_Bind : aliased constant S := "/BIND_FILE=" & "ADA " & "-A " & "C " & "-C"; -- /BIND_FILE=[bind-file-option] -- -- Specifies the language of the binder generated file. -- -- ADA (D) Binder file is Ada. -- -- C Binder file is 'C'. S_Link_Debug : aliased constant S := "/DEBUG=" & "ALL " & "-g3 " & "NONE " & "-g0 " & "TRACEBACK " & "-g1 " & "NOTRACEBACK " & "-g0"; -- /NODEBUG (D) -- /DEBUG[=debug-option] -- -- Specifies the amount of debugging information included. 'debug-option' -- is one of the following: -- -- ALL (D) Include full debugging information. -- -- NONE Provide no debugging information. Same as /NODEBUG. -- -- TRACEBACK Provide sufficient debug information for a traceback. -- -- NOTRACEBACK Same as NONE. S_Link_Nodebug : aliased constant S := "/NODEBUG " & "-g0"; -- NODOC (see /DEBUG) S_Link_Execut : aliased constant S := "/EXECUTABLE=@" & "-o@"; -- /EXECUTABLE=exec-name -- -- 'exec-name' specifies an alternative name for the generated executable -- program. If this qualifier switch is omitted, the executable is called -- the name of the main unit. So "$ GNAT LINK TRY.ALI" creates an -- executable called TRY.EXE. S_Link_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Link_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Link_Forlink : aliased constant S := "/FOR_LINKER=" & '"' & "--for-linker=" & '"'; -- /FOR_LINKER=<string> -- -- Transmit the option <string> to the underlying linker. S_Link_Force : aliased constant S := "/FORCE_OBJECT_FILE_LIST " & "-f"; -- /NOFORCE_OBJECT_FILE_LIST (D) -- /FORCE_OBJECT_FILE_LIST -- -- Forces the generation of a file that contains commands for the linker. -- This is useful in some cases to deal with special situations where the -- command line length is exceeded. S_Link_Ident : aliased constant S := "/IDENTIFICATION=" & '"' & "--for-linker=IDENT=" & '"'; -- /IDENTIFICATION="<string>" -- -- "<string>" specifies the string to be stored in the image file ident- -- ification field in the image header. It overrides any pragma Ident -- specified string. S_Link_Libdir : aliased constant S := "/LIBDIR=*" & "-L*"; -- /LIBDIR=(directory, ...) -- -- Look for libraries in the specified directories. S_Link_Library : aliased constant S := "/LIBRARY=|" & "-l|"; -- /LIBRARY=xyz -- -- Link with library named "xyz". S_Link_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Link_Nocomp : aliased constant S := "/NOCOMPILE " & "-n"; -- /NOCOMPILE -- -- Do not compile the file generated by the binder. -- This may be used when a link is rerun with different options, -- but there is no need to recompile the binder generated file. S_Link_Noinhib : aliased constant S := "/NOINHIBIT-EXEC " & "--for-linker=--noinhibit-exec"; -- /NOINHIBIT-EXEC -- -- Delete executable if there are errors or warnings. S_Link_Nofiles : aliased constant S := "/NOSTART_FILES " & "-nostartfiles"; -- /NOSTART_FILES -- -- Link in default image initialization and startup functions. S_Link_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- linker. -- The source and object directories to be searched will be communicated -- to the linker through logical names ADA_PRJ_INCLUDE_FILE and -- ADA_PRJ_OBJECTS_FILE. S_Link_Return : aliased constant S := "/RETURN_CODES=" & "POSIX " & "!-mvms-return-codes " & "VMS " & "-mvms-return-codes"; -- /RETURN_CODES=POSIX (D) -- /RETURN_CODES=VMS -- -- Specifies the style of codes returned by -- Ada.Command_Line.Set_Exit_Status. Must be used in conjunction with -- and match the Bind qualifier with the same name. -- -- POSIX (D) Return Posix compatible exit codes. -- -- VMS Return VMS compatible exit codes. The value returned -- is identically equal to the Set_Exit_Status parameter. S_Link_Static : aliased constant S := "/STATIC " & "--for-linker=-static"; -- /NOSTATIC (D) -- /STATIC -- -- Indicate to the linker that the link is static. S_Link_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Link_Verb : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Causes additional information to be output, including a full list of -- the included object files. This switch option is most useful when you -- want to see what set of object files are being used in the link step. S_Link_ZZZZZ : aliased constant S := "/<other> " & "--for-linker="; -- /<other> -- -- Any other switch that will be transmitted to the underlying linker. Link_Switches : aliased constant Switches := (S_Link_Add 'Access, S_Link_Bind 'Access, S_Link_Debug 'Access, S_Link_Nodebug 'Access, S_Link_Execut 'Access, S_Link_Ext 'Access, S_Link_Follow 'Access, S_Link_Forlink 'Access, S_Link_Force 'Access, S_Link_Ident 'Access, S_Link_Libdir 'Access, S_Link_Library 'Access, S_Link_Mess 'Access, S_Link_Nocomp 'Access, S_Link_Nofiles 'Access, S_Link_Noinhib 'Access, S_Link_Project 'Access, S_Link_Return 'Access, S_Link_Static 'Access, S_Link_Subdirs 'Access, S_Link_Verb 'Access, S_Link_ZZZZZ 'Access); ---------------------------- -- Switches for GNAT LIST -- ---------------------------- S_List_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_List_All : aliased constant S := "/ALL_UNITS " & "-a"; -- /NOALL_UNITS (D) -- /ALL_UNITS -- -- Consider all units, including those of the predefined Ada library. -- Especially useful with /DEPENDENCIES. S_List_Allproj : aliased constant S := "/ALL_PROJECTS " & "-U"; -- /NOALL_PROJECTS (D) -- /ALL_PROJECTS -- -- When used with a project file and no file specified, indicate -- that gnatls should be called for all sources of all projects in -- the project tree. S_List_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- /NOCURRENT_DIRECTORY -- -- Look for source, library or object files in the default directory. S_List_Depend : aliased constant S := "/DEPENDENCIES " & "-d"; -- /NODEPENDENCIES (D) -- /DEPENDENCIES S_List_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_List_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_List_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_List_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_List_Nostinc : aliased constant S := "/NOSTD_INCLUDES " & "-nostdinc"; -- /NOSTD_INCLUDES -- -- Do not look for sources of the run time in the standard directory. S_List_Object : aliased constant S := "/OBJECT_SEARCH=*" & "-aO*"; -- /OBJECT_SEARCH=(directory,...) -- -- When looking for library and object files look also in the specified -- directories. S_List_Output : aliased constant S := "/OUTPUT=" & "SOURCES " & "-s " & "DEPEND " & "-d " & "OBJECTS " & "-o " & "UNITS " & "-u " & "OPTIONS " & "-h " & "VERBOSE " & "-v "; -- /OUTPUT=(option,option,...) -- -- SOURCES (D) Only output information about source files. -- -- DEPEND List sources from which specified units depend on. -- -- OBJECTS Only output information about object files. -- -- UNITS Only output information about compilation units. -- -- OPTIONS Output the list of options. -- -- VERBOSE Output the complete source and object paths. -- Do not use the default column layout but instead -- use long format giving as much as information -- possible on each requested units, including -- special characteristics. S_List_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before doing any listing. -- The source and object directories to be searched will be communicated -- to gnatlist through logical names ADA_PRJ_INCLUDE_FILE and -- ADA_PRJ_OBJECTS_FILE. S_List_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory,...) -- -- Search the specified directories for both source and object files. S_List_Source : aliased constant S := "/SOURCE_SEARCH=*" & "-aI*"; -- /SOURCE_SEARCH=(directory,...) -- -- When looking for source files also look in the specified directories. S_List_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. List_Switches : aliased constant Switches := (S_List_Add 'Access, S_List_All 'Access, S_List_Allproj 'Access, S_List_Current 'Access, S_List_Depend 'Access, S_List_Ext 'Access, S_List_Files 'Access, S_List_Follow 'Access, S_List_Mess 'Access, S_List_Nostinc 'Access, S_List_Object 'Access, S_List_Output 'Access, S_List_Project 'Access, S_List_Search 'Access, S_List_Source 'Access, S_List_Subdirs 'Access); ---------------------------- -- Switches for GNAT MAKE -- ---------------------------- S_Make_Actions : aliased constant S := "/ACTIONS=" & "COMPILE " & "-c " & "BIND " & "-b " & "LINK " & "-l "; -- /ACTIONS=(keyword[,...]) -- -- GNAT MAKE default behavior is to check if the sources are up to date, -- compile those sources that are not up to date, bind the main source, -- then link the executable. -- -- With the /ACTIONS qualifier, GNAT MAKE may be restricted to one or -- two of these three steps: -- -- o Compile -- o Bind -- o Link -- -- -- You may specify one or more of the following keywords to the /ACTIONS -- qualifier: -- -- BIND Bind only. Can be combined with /ACTIONS=COMPILE -- to do compilation and binding, but no linking. -- Can be combined with /ACTIONS=LINK to do binding and -- linking. When not combined with /ACTIONS=COMPILE, -- all the units in the closure of the main program must -- have been previously compiled and must be up to date. -- -- COMPILE Compile only. Do not perform binding, except when -- /ACTIONS=BIND is also specified. Do not perform -- linking, except if both /ACTIONS=BIND and /ACTIONS=LINK -- are also specified. -- -- LINK Link only. Can be combined with /ACTIONS=BIND to do -- binding and linking. Linking will not be performed -- if combined with /ACTIONS=COMPILE but not with -- /ACTIONS=BIND\. When not combined with /ACTIONS=BIND -- all the units in the closure of the main program must -- have been previously compiled and must be up to date, -- and the main program need to have been bound. S_Make_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Make_All : aliased constant S := "/ALL_FILES " & "-a"; -- /NOALL_FILES (D) -- /ALL_FILES -- -- Consider all files in the make process, even the GNAT internal system -- files (for example, the predefined Ada library files). By default, -- GNAT MAKE does not check these files (however, if there is an -- installation problem, it will be caught when GNAT MAKE binds your -- program). You may have to specify this qualifier if you are working on -- GNAT itself. The vast majority of GNAT MAKE users never need to -- specify this switch. All GNAT internal files with will be compiled -- with /STYLE_CHECK=GNAT. S_Make_Allproj : aliased constant S := "/ALL_PROJECTS " & "-U"; -- /NOALL_PROJECTS (D) -- /ALL_PROJECTS -- -- Implies /Unique. -- When used without project files, it is equivalent to /UNIQUE. -- When used with a project file with no main (neither on the command -- line nor in the attribute Main) check every source of every project, -- recompile all sources that are not up to date and rebuild libraries -- if necessary. S_Make_Bind : aliased constant S := "/BINDER_QUALIFIERS=?" & "-bargs BIND"; -- /BINDER_QUALIFIERS -- -- Any qualifiers specified after this qualifier other than -- /COMPILER_QUALIFIERS, /LINKER_QUALIFIERS and /MAKE_QUALIFIERS will be -- passed to any GNAT BIND commands generated by GNAT MAKE. S_Make_Bindprj : aliased constant S := "/BND_LNK_FULL_PROJECT " & "-B"; -- /BND_LNK_FULL_PROJECT -- -- Bind and link all sources of a project, without any consideration -- to attribute Main, if there is one. This qualifier need to be -- used in conjunction with the /PROJECT_FILE= qualifier and cannot -- be used with a main subprogram on the command line or for -- a library project file. As the binder is invoked with the option -- meaning "No Ada main subprogram", the user must ensure that the -- proper options are specified to the linker. This qualifier is -- normally used when the main subprogram is in a foreign language -- such as C. S_Make_Comp : aliased constant S := "/COMPILER_QUALIFIERS=?" & "-cargs COMPILE"; -- /COMPILER_QUALIFIERS -- -- Any qualifiers specified after this qualifier other than -- /BINDER_QUALIFIERS, /LINKER_QUALIFIERS and /MAKE_QUALIFIERS will be -- passed to any GNAT COMPILE commands generated by GNAT MAKE. S_Make_Cond : aliased constant S := "/CONDITIONAL_SOURCE_SEARCH=*" & "-A*"; -- /CONDITIONAL_SOURCE_SEARCH=dir -- -- Equivalent to "/SOURCE_SEARCH=dir /SKIP_MISSING=dir". S_Make_Cont : aliased constant S := "/CONTINUE_ON_ERROR " & "-k"; -- /NOCONTINUE_ON_ERROR (D) -- /CONTINUE_ON_ERROR -- -- Keep going. Continue as much as possible after a compilation error. -- To ease the programmer's task in case of compilation errors, the list -- of sources for which the compile fails is given when GNAT MAKE -- terminates. S_Make_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- /NOCURRENT_DIRECTORY -- -- Look for source, library or object files in the default directory. S_Make_Dep : aliased constant S := "/DEPENDENCIES_LIST " & "-M"; -- /NODEPENDENCIES_LIST (D) -- /DEPENDENCIES_LIST -- -- Check if all objects are up to date. If they are, output the object -- dependences to SYS$OUTPUT in a form that can be directly exploited in -- a Unix-style Makefile. By default, each source file is prefixed with -- its (relative or absolute) directory name. This name is whatever you -- specified in the various /SOURCE_SEARCH and /SEARCH qualifiers. If -- you also specify the /QUIET qualifier, only the source file names, -- without relative paths, are output. If you just specify the -- /DEPENDENCY_LIST qualifier, dependencies of the GNAT internal system -- files are omitted. This is typically what you want. If you also -- specify the /ALL_FILES qualifier, dependencies of the GNAT internal -- files are also listed. Note that dependencies of the objects in -- external Ada libraries (see the /SKIP_MISSING qualifier) are never -- reported. S_Make_Dirobj : aliased constant S := "/DIRECTORY_OBJECTS=@" & "-D@"; -- /DIRECTORY_OBJECTS=<file> -- -- Put all object files and .ALI files in <file>. -- This qualifier is not compatible with /PROJECT_FILE. S_Make_Disprog : aliased constant S := "/DISPLAY_PROGRESS " & "-d"; -- /NOPLAY_PROGRESS (D) -- /DISPLAY_PROGRESS -- -- Display progress for each source, up to date or not, as a single line -- completed x out of y (zz%) -- If the file needs to be compiled this is displayed after the -- invocation of the compiler. These lines are displayed even in quiet -- output mode (/QUIET). S_Make_Doobj : aliased constant S := "/DO_OBJECT_CHECK " & "-n"; -- /NODO_OBJECT_CHECK (D) -- /DO_OBJECT_CHECK -- -- Don't compile, bind, or link. Output a single command that will -- recompile an out of date unit, if any. Repeated use of this option, -- followed by carrying out the indicated compilation, will eventually -- result in recompiling all required units. -- -- If any ALI is missing during the process, GNAT MAKE halts and -- displays an error message. S_Make_Execut : aliased constant S := "/EXECUTABLE=@" & "-o@"; -- /EXECUTABLE=exec-name -- -- The name of the final executable program will be 'exec_name'. If this -- qualifier is omitted the default name for the executable will be the -- name of the input file with an EXE filetype. You may prefix -- 'exec_name' with a relative or absolute directory path. S_Make_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Make_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Make_Force : aliased constant S := "/FORCE_COMPILE " & "-f"; -- /NOFORCE_COMPILE (D) -- /FORCE_COMPILE -- -- Force recompilations. Recompile all sources, even though some object -- files may be up to date, but don't recompile predefined or GNAT -- internal files unless the /ALL_FILES qualifier is also specified. S_Make_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " & "-F"; -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D) -- /FULL_PATH_IN_BRIEF_MESSAGES -- -- When using project files, if some errors or warnings are detected -- during parsing and verbose mode is not in effect (no use of qualifier -- /VERBOSE), then error lines start with the full path name of the -- project file, rather than its simple file name. S_Make_Hi_Verb : aliased constant S := "/HIGH_VERBOSITY " & "-vh"; -- /NOHIGH_VERBOSITY (D) -- /HIGH_VERBOSITY -- -- Displays the reason for all recompilations GNAT MAKE decides are -- necessary, in high verbosity. Equivalent to /VERBOSE. S_Make_Inplace : aliased constant S := "/IN_PLACE " & "-i"; -- /NOIN_PLACE (D) -- /IN_PLACE -- -- In normal mode, GNAT MAKE compiles all object files and ALI files -- into the current directory. If the /IN_PLACE switch is used, -- then instead object files and ALI files that already exist are over- -- written in place. This means that once a large project is organized -- into separate directories in the desired manner, then GNAT MAKE will -- automatically maintain and update this organization. If no ALI files -- are found on the Ada object path, the new object and ALI files are -- created in the directory containing the source being compiled. S_Make_Index : aliased constant S := "/SOURCE_INDEX=#" & "-eI#"; -- /SOURCE_INDEX=nnn -- -- Specifies the index of the units in the source file -- By default, source files are mono-unit and there is no index -- When /SOURCE_INDEX=nnn is specified, only one main may be specified -- on the command line. S_Make_Library : aliased constant S := "/LIBRARY_SEARCH=*" & "-L*"; -- /LIBRARY_SEARCH=(directory[,...]) -- -- Add the specified directories to the list of directories in which the -- linker will search for libraries. S_Make_Link : aliased constant S := "/LINKER_QUALIFIERS=?" & "-largs LINK"; -- /LINKER_QUALIFIERS -- -- Any qualifiers specified after this qualifier other than -- /COMPILER_QUALIFIERS, /BINDER_QUALIFIERS and /MAKE_QUALIFIERS will be -- passed to any GNAT LINK commands generated by GNAT LINK. S_Make_Low_Verb : aliased constant S := "/LOW_VERBOSITY " & "-vl"; -- /NOLOW_VERBOSITY (D) -- /LOW_VERBOSITY -- -- Displays the reason for all recompilations GNAT MAKE decides are -- necessary, in low verbosity, that is with less output than -- /MEDIUM_VERBOSITY, /HIGH_VERBOSITY or /VERBOSE. S_Make_Make : aliased constant S := "/MAKE_QUALIFIERS=?" & "-margs MAKE"; -- /MAKE_QUALIFIERS -- -- Any qualifiers specified after this qualifier other than -- /COMPILER_QUALIFIERS, /BINDER_QUALIFIERS and /LINKER_QUALIFIERS -- are for the benefit of GNAT MAKE itself. S_Make_Mapping : aliased constant S := "/MAPPING " & "-C"; -- /NOMAPPING (D) -- /MAPPING -- -- Use a mapping file. A mapping file is a way to communicate to the -- compiler two mappings: from unit names to file names (without any -- directory information) and from file names to path names (with full -- directory information). These mappings are used by the compiler to -- short-circuit the path search. When GNAT MAKE is invoked with this -- qualifier, it will create a mapping file, initially populated by the -- project manager, if /PROJECT_File= is used, otherwise initially empty. -- Each invocation of the compiler will add the newly accessed sources to -- the mapping file. This will improve the source search during the next -- invocations of the compiler S_Make_Med_Verb : aliased constant S := "/MEDIUM_VERBOSITY " & "-vm"; -- /NOMEDIUM_VERBOSITY (D) -- /MEDIUM_VERBOSITY -- -- Displays the reason for all recompilations GNAT MAKE decides are -- necessary, in medium verbosity, that is with potentially less output -- than /HIGH_VERBOSITY or /VERBOSE. S_Make_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Make_Minimal : aliased constant S := "/MINIMAL_RECOMPILATION " & "-m"; -- /NOMINIMAL_RECOMPILATION (D) -- /MINIMAL_RECOMPILATION -- -- Specifies that the minimum necessary amount of recompilation -- be performed. In this mode GNAT MAKE ignores time stamp differences -- when the only modifications to a source file consist in -- adding/removing comments, empty lines, spaces or tabs. S_Make_Missing : aliased constant S := "/CREATE_MISSING_DIRS " & "-p"; -- /NOCREATE_MISSING_DIRS (D) -- /CREATE_MISSING_DIRS -- -- When an object directory, a library directory or an exec directory -- in missing, attempt to create the directory. S_Make_Nolink : aliased constant S := "/NOLINK " & "-c"; -- /NOLINK -- -- Compile only. Do not perform binding and linking. If the root unit is -- not a main unit, this is the default. Otherwise GNAT MAKE will -- attempt binding and linking unless all objects are up to date and the -- executable is more recent than the objects. -- This is equivalent to /ACTIONS=COMPILE S_Make_Nomain : aliased constant S := "/NOMAIN " & "-z"; -- /NOMAIN -- -- No main subprogram. Bind and link the program even if the unit name -- given on the command line is a package name. The resulting executable -- will execute the elaboration routines of the package and its closure, -- then the finalization routines. S_Make_Nonpro : aliased constant S := "/NON_PROJECT_UNIT_COMPILATION " & "-x"; -- /NON_PROJECT_UNIT_COMPILATION -- -- Normally, when using project files, a unit that is not part of any -- project file, cannot be compile. These units may be compile, when -- needed, if this qualifier is specified. S_Make_Nostinc : aliased constant S := "/NOSTD_INCLUDES " & "-nostdinc"; -- /NOSTD_INCLUDES -- -- Do not look for sources the in the system default directory. S_Make_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " & "-nostdlib"; -- /NOSTD_LIBRARIES -- -- Do not look for library files in the system default directory. S_Make_Object : aliased constant S := "/OBJECT_SEARCH=*" & "-aO*"; -- /OBJECT_SEARCH=(directory[,...]) -- -- When looking for library and object files look also in the specified -- directories. S_Make_Proc : aliased constant S := "/PROCESSES=#" & "-j#"; -- /NOPROCESSES (D) -- /PROCESSES=NNN -- -- Use NNN processes to carry out the (re)compilations. If you have a -- multiprocessor machine, compilations will occur in parallel. In the -- event of compilation errors, messages from various compilations might -- get interspersed (but GNAT MAKE will give you the full ordered list of -- failing compiles at the end). This can at times be annoying. To get a -- clean list of error messages don't use this qualifier. S_Make_Nojobs : aliased constant S := "/NOPROCESSES " & "-j1"; -- NODOC (see /PROCESS) S_Make_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before any other processing to -- set the building environment. S_Make_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- When this qualifiers is specified, the commands carried out by GNAT -- MAKE are not displayed. S_Make_Reason : aliased constant S := "/REASONS " & "-v"; -- /NOREASONS (D) -- /REASONS -- -- Displays the reason for all recompilations GNAT MAKE decides are -- necessary. S_Make_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" & "--RTS=|"; -- /RUNTIME_SYSTEM=xxx -- -- Build against an alternate runtime system named xxx or RTS-xxx. S_Make_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory[,...]) -- -- Search the specified directories for both source and object files. S_Make_Single : aliased constant S := "/SINGLE_COMPILE_PER_OBJ_DIR " & "--single-compile-per-obj-dir"; -- /NOSINGLE_COMPILE_PER_OBJ_DIR (D) -- /SINGLE_COMPILE_PER_OBJ_DIR -- -- When project files are used, do not allow simultaneous compilations -- for the same object directory. S_Make_Skip : aliased constant S := "/SKIP_MISSING=*" & "-aL*"; -- /SKIP_MISSING=(directory[,...]) -- -- Skip missing library sources if ALI in 'directory'. S_Make_Source : aliased constant S := "/SOURCE_SEARCH=*" & "-aI*"; -- /SOURCE_SEARCH=(directory[,...]) -- -- When looking for source files also look in the specified directories. S_Make_Src_Info : aliased constant S := "/SRC_INFO=<" & "--source-info=>"; -- /SRC_INFO=source-info-file -- -- Specify a source info file to be read or written by the Project -- Manager when project files are used. S_Make_Stand : aliased constant S := "/STANDARD_OUTPUT_FOR_COMMANDS " & "-eS"; -- /NOSTANDARD_OUTPUT_FOR_COMMANDS (D) -- /STANDARD_OUTPUT_FOR_COMMANDS -- -- Output the commands for the compiler, the binder and the linker -- on SYS$OUTPUT, instead of SYS$ERROR. S_Make_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Make_Switch : aliased constant S := "/SWITCH_CHECK " & "-s"; -- /NOSWITCH_CHECK (D) -- /SWITCH_CHECK -- -- Recompile if compiler switches have changed since last compilation. -- All compiler switches but -I and -o are taken into account in the -- following way: orders between different "first letter" switches are -- ignored, but orders between same switches are taken into account. -- For example, -O -O2 is different than -O2 -O, but -g -O is equivalent -- to -O -g. S_Make_USL : aliased constant S := "/UNCHECKED_SHARED_LIB_IMPORTS " & "--unchecked-shared-lib-imports"; -- /NOUNCHECKED_SHARED_LIB_IMPORTS (D) -- /UNCHECKED_SHARED_LIB_IMPORTS -- -- Allow shared library projects to import static library projects S_Make_Unique : aliased constant S := "/UNIQUE " & "-u"; -- /NOUNIQUE (D) -- /UNIQUE -- -- Recompile at most the main file. It implies /ACTIONS=COMPILE. -- Combined with /FORCE_COMPILE, it is equivalent to calling the compiler -- directly. S_Make_Use_Map : aliased constant S := "/USE_MAPPING_File=@" & "-C=@"; -- /USE_MAPPING_FILE=file_name -- -- Use a specific mapping file. The file 'file_name', specified as a path -- name (absolute or relative) by this qualifier, should already exist, -- otherwise the qualifier is ineffective. The specified mapping file -- will be communicated to the compiler. This switch is not compatible -- with a project file (/PROJECT_FILE=) or with multiple compiling -- processes (/PROCESSES=nnn, when nnn is greater than 1). S_Make_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Displays the reason for all recompilations GNAT MAKE decides are -- necessary. Make_Switches : aliased constant Switches := (S_Make_Add 'Access, S_Make_Actions 'Access, S_Make_All 'Access, S_Make_Allproj 'Access, S_Make_Bind 'Access, S_Make_Comp 'Access, S_Make_Cond 'Access, S_Make_Cont 'Access, S_Make_Current 'Access, S_Make_Dep 'Access, S_Make_Dirobj 'Access, S_Make_Disprog 'Access, S_Make_Doobj 'Access, S_Make_Execut 'Access, S_Make_Ext 'Access, S_Make_Follow 'Access, S_Make_Force 'Access, S_Make_Full 'Access, S_Make_Hi_Verb 'Access, S_Make_Inplace 'Access, S_Make_Index 'Access, S_Make_Library 'Access, S_Make_Link 'Access, S_Make_Low_Verb'Access, S_Make_Make 'Access, S_Make_Mapping 'Access, S_Make_Med_Verb'Access, S_Make_Mess 'Access, S_Make_Minimal 'Access, S_Make_Missing 'Access, S_Make_Nolink 'Access, S_Make_Nomain 'Access, S_Make_Nonpro 'Access, S_Make_Nostinc 'Access, S_Make_Nostlib 'Access, S_Make_Object 'Access, S_Make_Proc 'Access, S_Make_Nojobs 'Access, S_Make_Project 'Access, S_Make_Quiet 'Access, S_Make_Reason 'Access, S_Make_RTS 'Access, S_Make_Search 'Access, S_Make_Single 'Access, S_Make_Skip 'Access, S_Make_Source 'Access, S_Make_Src_Info'Access, S_Make_Stand 'Access, S_Make_Subdirs 'Access, S_Make_Switch 'Access, S_Make_USL 'Access, S_Make_Unique 'Access, S_Make_Use_Map 'Access, S_Make_Verbose 'Access); ------------------------------ -- Switches for GNAT METRIC -- ------------------------------ S_Metric_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Metric_All_Prjs : aliased constant S := "/ALL_PROJECTS " & "-U"; -- /NOALL_PROJECTS (D) -- /ALL_PROJECTS -- When GNAT METRIC is used with a Project File and no source is -- specified, the underlying tool gnatmetric is called for all the -- sources of all the Project Files in the project tree. S_Metric_Debug : aliased constant S := "/DEBUG_OUTPUT " & "-dv"; -- /DEBUG_OUTPUT -- -- Generate the debug information S_Metric_Direct : aliased constant S := "/DIRECTORY=@" & "-d=@"; -- /DIRECTORY=pathname -- -- Put the files with detailed metric information into the specified -- directory S_Metric_Element : aliased constant S := "/ELEMENT_METRICS=" & "ALL " & "!-ed,!-es,!-enl,!-eps," & "!-eas,!-ept,!-eat,!-enu," & "!-ec " & "DECLARATION_TOTAL " & "-ed " & "STATEMENT_TOTAL " & "-es " & "LOOP_NESTING_MAX " & "-enl " & "INT_SUBPROGRAMS " & "-eps " & "SUBPROGRAMS_ALL " & "-eas " & "INT_TYPES " & "-ept " & "TYPES_ALL " & "-eat " & "PROGRAM_NESTING_MAX " & "-enu " & "CONSTRUCT_NESTING_MAX " & "-ec"; -- NODOC (see /SYNTAX_METRICS) S_Metric_Syntax : aliased constant S := "/SYNTAX_METRICS=" & "ALL " & "--syntax-all " & "NONE " & "--no-syntax-all " & "DECLARATIONS " & "--declarations " & "NODECLARATIONS " & "--no-declarations " & "STATEMENTS " & "--statements " & "NOSTATEMENTS " & "--no-statements " & "PUBLIC_SUBPROGRAMS " & "--public-subprograms " & "NOPUBLIC_SUBPROGRAMS " & "--no-public-subprograms " & "ALL_SUBPROGRAMS " & "--all-subprograms " & "NOALL_SUBPROGRAMS " & "--no-all-subprograms " & "PUBLIC_TYPES " & "--public-types " & "NOPUBLIC_TYPES " & "--no-public-types " & "ALL_TYPES " & "--all-types " & "NOALL_TYPES " & "--no-all-types " & "UNIT_NESTING " & "--unit-nesting " & "NOUNIT_NESTING " & "--no-unit-nesting " & "CONSTRUCT_NESTING " & "--construct-nesting " & "NOCONSTRUCT_NESTING " & "--no-construct-nesting"; -- /SYNTAX_METRICS(option, option ...) -- -- Specifies the syntax element metrics to be computed (if at least one -- positive syntax element metric, line metric, complexity or coupling -- metric is specified then only explicitly specified syntax element -- metrics are computed and reported) -- -- option may be one of the following: -- -- ALL (D) All the syntax element metrics are computed -- NONE None of syntax element metrics is computed -- DECLARATIONS Compute the total number of declarations -- NODECLARATIONS Do not compute the total number of declarations -- STATEMENTS Compute the total number of statements -- NOSTATEMENTS Do not compute the total number of statements -- PUBLIC_SUBPROGRAMS Compute the number of public subprograms -- NOPUBLIC_SUBPROGRAMS Do not compute the number of public subprograms -- ALL_SUBPROGRAMS Compute the number of all the subprograms -- NOALL_SUBPROGRAMS Do not compute the number of all the -- subprograms -- PUBLIC_TYPES Compute the number of public types -- NOPUBLIC_TYPES Do not compute the number of public types -- ALL_TYPES Compute the number of all the types -- NOALL_TYPES Do not compute the number of all the types -- UNIT_NESTING Compute the maximal program unit nesting -- level -- NOUNIT_NESTING Do not compute the maximal program unit -- nesting level -- CONSTRUCT_NESTING Compute the maximal construct nesting level -- NOCONSTRUCT_NESTING Do not compute the maximal construct nesting -- level -- -- All combinations of syntax element metrics options are allowed. S_Metric_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Metric_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_Metric_Format : aliased constant S := "/FORMAT_OUTPUT=" & "DEFAULT " & "!-x,!-nt,!-sfn " & "XML " & "-x " & "XSD " & "-xs " & "NO_TEXT " & "-nt " & "SHORT_SOURCE_FILE_NAME " & "-sfn"; -- /FORMAT_OUTPUT=(option, option ...) -- -- Specifies the details of the tool output -- -- option may be one of the following: -- -- DEFAULT (D) Generate the text output only, use full -- argument source names in global information -- XML Generate the output in XML format -- XSD Generate the output in XML format, and -- generate an XML schema file that describes -- the structure of XML metrics report -- NO_TEXT Do not generate the text output (implies XML) -- SHORT_SOURCE_FILE_NAME Use short argument source names in output S_Metric_Globout : aliased constant S := "/GLOBAL_OUTPUT=@" & "-og@"; -- /GLOBAL_OUTPUT=filename -- -- Put the textual global metric information into the specified file S_Metric_Line : aliased constant S := "/LINE_METRICS=" & "ALL " & "!-la,!-lcode,!-lcomm," & "!-leol,!-lb " & "LINES_ALL " & "-la " & "CODE_LINES " & "-lcode " & "COMENT_LINES " & "-lcomm " & "MIXED_CODE_COMMENTS " & "-leol " & "COMMENT_PERCENTAGE " & "-lratio " & "BLANK_LINES " & "-lb " & "AVERAGE_LINES_IN_BODIES " & "-lav "; -- NODOC (see /LINE_COUNT_METRICS) S_Metric_Lines : aliased constant S := "/LINE_COUNT_METRICS=" & "ALL " & "--lines-all " & "NONE " & "--no-lines-all " & "ALL_LINES " & "--lines " & "NOALL_LINES " & "--no-lines " & "CODE_LINES " & "--lines-code " & "NOCODE_LINES " & "--no-lines-code " & "COMMENT_LINES " & "--lines-comment " & "NOCOMMENT_LINES " & "--no-lines-comment " & "CODE_COMMENT_LINES " & "--lines-eol-comment " & "NOCODE_COMMENT_LINES " & "--no-lines-eol-comment " & "COMMENT_PERCENTAGE " & "--lines-ratio " & "NOCOMMENT_PERCENTAGE " & "--no-lines-ratio " & "BLANK_LINES " & "--lines-blank " & "NOBLANK_LINES " & "--no-lines-blank " & "AVERAGE_BODY_LINES " & "--lines-average " & "NOAVERAGE_BODY_LINES " & "--no-lines-average"; -- /LINE_COUNT_METRICS=(option, option ...) -- Specifies the line metrics to be computed (if at least one positive -- syntax element metric, line metric, complexity or coupling metric is -- specified then only explicitly specified line metrics are computed -- and reported) -- -- option may be one of the following: -- -- ALL (D) All the line metrics are computed -- NONE None of line metrics is computed -- ALL_LINES All lines are computed -- NOALL_LINES All lines are not computed -- CODE_LINES Lines with Ada code are computed -- NOCODE_LINES Lines with Ada code are not computed -- COMMENT_LINES Comment lines are computed -- NOCOMMENT_LINES Comment lines are not computed -- CODE_COMMENT_LINES Lines containing both code and comment parts -- are computed -- NOCODE_COMMENT_LINES Lines containing both code and comment parts -- are not computed -- COMMENT_PERCENTAGE Ratio between comment lines and all the lines -- containing comments and program code is -- computed -- NOCOMMENT_PERCENTAGE Ratio between comment lines and all the lines -- containing comments and program code is not -- computed -- BLANK_LINES Blank lines are computed -- NOBLANK_LINES Blank lines are not computed -- AVERAGE_BODY_LINES Average number of code lines in subprogram, -- task and entry bodies and statement sequences -- of package bodies is computed -- NOAVERAGE_BODY_LINES Average number of code lines in subprogram, -- task and entry bodies and statement sequences -- of package bodies is not computed -- -- All combinations of line metrics options are allowed. S_Metric_Complexity : aliased constant S := "/COMPLEXITY_METRICS=" & "ALL " & "--complexity-all " & "NONE " & "--no-complexity-all " & "CYCLOMATIC " & "--complexity-cyclomatic " & "NOCYCLOMATIC " & "--no-complexity-cyclomatic "& "ESSENTIAL " & "--complexity-essential " & "NOESSENTIAL " & "--no-complexity-essential " & "LOOP_NESTING " & "--loop-nesting " & "NOLOOP_NESTING " & "--no-loop-nesting " & "AVERAGE_COMPLEXITY " & "--complexity-average " & "NOAVERAGE_COMPLEXITY " & "--no-complexity-average " & "EXTRA_EXIT_POINTS " & "--extra-exit-points " & "NOEXTRA_EXIT_POINTS " & "--no-extra-exit-points"; -- /COMPLEXITY_METRICS=(option, option ...) -- Specifies the complexity metrics to be computed (if at least one -- positive syntax element metric, line metric, complexity or coupling -- metric is specified then only explicitly specified complexity metrics -- are computed and reported) -- -- option may be one of the following: -- -- ALL (D) All the complexity metrics are computed -- NONE None of complexity metrics is computed -- CYCLOMATIC Compute the McCabe Cyclomatic Complexity -- NOCYCLOMATIC Do not compute the McCabe Cyclomatic Complexity -- ESSENTIAL Compute the Essential Complexity -- NOESSENTIAL Do not compute the Essential Complexity -- LOOP_NESTING Compute the maximal loop nesting -- NOLOOP_NESTING Do not compute the maximal loop nesting -- AVERAGE_COMPLEXITY Compute the average complexity for executable -- bodies -- NOAVERAGE_COMPLEXITY Do not compute the average complexity for -- executable bodies -- EXTRA_EXIT_POINTS Compute extra exit points metric -- NOEXTRA_EXIT_POINTS Do not compute extra exit points metric -- -- All combinations of line metrics options are allowed. S_Metric_Coupling : aliased constant S := "/COUPLING_METRICS=" & "ALL " & "--coupling-all " & "TAGGED_OUT " & "--tagged-coupling-out " & "TAGGED_IN " & "--tagged-coupling-in " & "HIERARCHY_OUT " & "--hierarchy-coupling-out " & "HIERARCHY_IN " & "--hierarchy-coupling-in " & "UNIT_OUT " & "--unit-coupling-out " & "UNIT_IN " & "--unit-coupling-in " & "CONTROL_OUT " & "--control-coupling-out " & "CONTROL_IN " & "--control-coupling-in"; -- /COUPLING_METRICS=(option, option ...) -- Specifies the coupling metrics to be computed. -- -- option may be one of the following: -- -- ALL All the coupling metrics are computed -- NOALL (D) None of coupling metrics is computed -- TAGGED_OUT Compute tagged (class) far-out coupling -- TAGGED_IN Compute tagged (class) far-in coupling -- HIERARCHY_OUT Compute hieraqrchy (category) far-out coupling -- HIERARCHY_IN Compute hieraqrchy (category) far-in coupling -- UNIT_OUT Compute unit far-out coupling -- UNIT_IN Compute unit far-in coupling -- CONTROL_OUT Compute control far-out coupling -- CONTROL_IN Compute control far-in coupling -- -- All combinations of coupling metrics options are allowed. S_Metric_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Metric_No_Local : aliased constant S := "/NO_LOCAL_DETAILS " & "-nolocal"; -- /LOCAL_DETAILS (D) -- /NO_LOCAL_DETAILS -- -- Do not compute the detailed metrics for local program units. S_Metric_No_Exits_As_Gotos : aliased constant S := "/NO_EXITS_AS_GOTOS " & "-ne"; -- /EXITS_AS_GOTOS (D) -- /NO_EXITS_AS_GOTOS -- -- Do not count EXIT statements as GOTOs when computing the Essential -- Complexity. S_Metric_No_Static_Loop : aliased constant S := "/NO_STATIC_LOOP " & "--no-static-loop"; -- /STATIC_LOOP (D) -- /NO_STATIC_LOOP -- -- Do not count static FOR loop statements when computing the Cyclomatic -- Complexity. S_Metric_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Metric_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- binder. S_Metric_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Quiet mode: by default GNAT METRIC outputs to the standard error stream -- the number of program units left to be processed. This option turns -- this trace off. S_Metric_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Metric_Suffix : aliased constant S := "/SUFFIX_DETAILS=" & '"' & "-o" & '"'; -- /SUFFIX_DETAILS=suffix -- -- Use the given suffix as the suffix for the name of the file to place -- the detailed metrics into. S_Metric_Suppress : aliased constant S := "/SUPPRESS=" & "NOTHING " & "!-nocc,!-noec,!-nonl," & "!-ne,!-nolocal " & "CYCLOMATIC_COMPLEXITY " & "-nocc " & "ESSENTIAL_COMPLEXITY " & "-noec " & "MAXIMAL_LOOP_NESTING " & "-nonl " & "EXITS_AS_GOTOS " & "-ne " & "LOCAL_DETAILS " & "-nolocal "; -- NODOC (see /COMPLEXITY_METRICS /NO_LOCAL_DETAILS /NO_EXITS_AS_GOTOS) S_Metric_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Verbose mode. S_Metric_XMLout : aliased constant S := "/XML_OUTPUT=@" & "-ox@"; -- /XML_OUTPUT=filename -- -- Place the XML output into the specified file Metric_Switches : aliased constant Switches := (S_Metric_Add 'Access, S_Metric_All_Prjs 'Access, S_Metric_Complexity 'Access, S_Metric_Coupling 'Access, S_Metric_Debug 'Access, S_Metric_Direct 'Access, S_Metric_Element 'Access, S_Metric_Ext 'Access, S_Metric_Files 'Access, S_Metric_Follow 'Access, S_Metric_Format 'Access, S_Metric_Globout 'Access, S_Metric_Line 'Access, S_Metric_Lines 'Access, S_Metric_Mess 'Access, S_Metric_No_Exits_As_Gotos'Access, S_Metric_No_Local 'Access, S_Metric_No_Static_Loop 'Access, S_Metric_Project 'Access, S_Metric_Quiet 'Access, S_Metric_Suffix 'Access, S_Metric_Subdirs 'Access, S_Metric_Syntax 'Access, S_Metric_Suppress 'Access, S_Metric_Verbose 'Access, S_Metric_XMLout 'Access); ---------------------------- -- Switches for GNAT NAME -- ---------------------------- S_Name_Conf : aliased constant S := "/CONFIG_FILE=<" & "-c>"; -- /CONFIG_FILE=path_name -- -- Create a configuration pragmas file 'path_name' (instead of the default -- 'gnat.adc'). 'path_name' may include directory information. 'path_name' -- must be writable. There may be only one qualifier /CONFIG_FILE. -- This qualifier is not compatible with qualifier /PROJECT_FILE. S_Name_Dirs : aliased constant S := "/SOURCE_DIRS=*" & "-d*"; -- /SOURCE_DIRS=(directory, ...) -- -- Look for source files in the specified directories. When this qualifier -- is specified, the current working directory will not be searched for -- source files, unless it is explicitly specified with a qualifier -- /SOURCE_DIRS or /DIRS_FILE. Several qualifiers /SOURCE_DIRS may be -- specified. If a directory is specified as a relative path, it is -- relative to the directory of the configuration pragmas file specified -- with qualifier /CONFIG_FILE, or to the directory of the project file -- specified with qualifier /PROJECT_FILE or, if neither qualifier -- /CONFIG_FILE nor qualifier /PROJECT_FILE are specified, it is relative -- to the current working directory. The directories specified with -- qualifiers /SOURCE_DIRS must exist and be readable. S_Name_Dfile : aliased constant S := "/DIRS_FILE=<" & "-D>"; -- /DIRS_FILE=file_name -- -- Look for source files in all directories listed in text file -- 'file_name'. 'file_name' must be an existing, readable text file. -- Each non empty line in the specified file must be a directory. -- Specifying qualifier /DIRS_FILE is equivalent to specifying as many -- qualifiers /SOURCE_DIRS as there are non empty lines in the specified -- text file. S_Name_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Name_Frng : aliased constant S := "/FOREIGN_PATTERN=" & '"' & "-f" & '"'; -- /FOREIGN_PATTERN=<string> -- -- Specify a foreign pattern. -- Using this qualifier, it is possible to add sources of languages other -- than Ada to the list of sources of a project file. It is only useful -- if a qualifier /PROJECT_FILE is used. For example, -- -- GNAT NAME /PROJECT_FILE=PRJ /FOREIGN_PATTERN="*.C" "*.ADA" -- -- will look for Ada units in all files with the '.ADA' extension, and -- will add to the list of file for project PRJ.GPR the C files with -- extension ".C". S_Name_Help : aliased constant S := "/HELP " & "-h"; -- /NOHELP (D) -- /HELP -- -- Output usage information to the standard output stream. S_Name_Proj : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=file_name -- -- Create or update a project file. 'file_name' may include directory -- information. The specified file must be writable. There may be only -- one qualifier /PROJECT_FILE. When a qualifier /PROJECT_FILE is -- specified, no qualifier /CONFIG_FILE may be specified. S_Name_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Name_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Verbose mode. Output detailed explanation of behavior to the standard -- output stream. This includes name of the file written, the name of the -- directories to search and, for each file in those directories whose -- name matches at least one of the Naming Patterns, an indication of -- whether the file contains a unit, and if so the name of the unit. S_Name_Excl : aliased constant S := "/EXCLUDED_PATTERN=" & '"' & "-x" & '"'; -- /EXCLUDED_PATTERN=<string> -- -- Specify an excluded pattern. -- Using this qualifier, it is possible to exclude some files that would -- match the Naming patterns. For example, -- -- GNAT NAME /EXCLUDED_PATTERN="*_NT.ADA" "*.ADA" -- -- will look for Ada units in all files with the '.ADA' extension, except -- those whose names end with '_NT.ADA'. Name_Switches : aliased constant Switches := (S_Name_Conf 'Access, S_Name_Dirs 'Access, S_Name_Dfile 'Access, S_Name_Follow 'Access, S_Name_Frng 'Access, S_Name_Help 'Access, S_Name_Proj 'Access, S_Name_Subdirs 'Access, S_Name_Verbose 'Access, S_Name_Excl 'Access); ---------------------------------- -- Switches for GNAT PREPROCESS -- ---------------------------------- S_Prep_Assoc : aliased constant S := "/ASSOCIATE=" & '"' & "-D" & '"'; -- /ASSOCIATE="name=val" -- -- Defines a new symbol, associated with value. If no value is given -- on the command line, then symbol is considered to be True. -- This qualifier can be used in place of a definition file. S_Prep_Blank : aliased constant S := "/BLANK_LINES " & "-b"; -- /NOBLANK_LINES (D) -- /BLANK_LINES -- -- Causes both preprocessor lines and the lines deleted by preprocessing -- to be replaced by blank lines in the output source file, thus -- preserving line numbers in the output file. S_Prep_Com : aliased constant S := "/COMMENTS " & "-c"; -- /NOCOMMENTS (D) -- /COMMENTS -- -- /COMMENTS causes both preprocessor lines and the lines deleted -- by preprocessing to be retained in the output source as comments marked -- with the special string "--! ". This option will result in line numbers -- being preserved in the output file. -- -- /NOCOMMENTS causes both preprocessor lines and the lines deleted by -- preprocessing to be replaced by blank lines in the output source file, -- thus preserving line numbers in the output file. S_Prep_Ref : aliased constant S := "/REFERENCE " & "-r"; -- /NOREFERENCE (D) -- /REFERENCE -- -- Causes a "Source_Reference" pragma to be generated that references the -- original input file, so that error messages will use the file name of -- this original file. Also implies /BLANK_LINES if /COMMENTS is not -- specified. S_Prep_Remove : aliased constant S := "/REMOVE " & "!-b,!-c"; -- /REMOVE (D) -- /NOREMOVE -- -- Preprocessor lines and deleted lines are completely removed from the -- output. S_Prep_Replace : aliased constant S := "/REPLACE_IN_COMMENTS " & "-C"; -- /NOREPLACE_IN_COMMENTS (D) -- /REPLACE_IN_COMMENTS -- -- Causes preprocessor to scan comments and perform replacements on -- any $symbol occurrences within the comment text. S_Prep_Symbols : aliased constant S := "/SYMBOLS " & "-s"; -- /NOSYMBOLS (D) -- /SYMBOLS -- -- Causes a sorted list of symbol names and values to be listed on -- SYS$OUTPUT. S_Prep_Undef : aliased constant S := "/UNDEFINED " & "-u"; -- /NOUNDEFINED (D) -- /UNDEFINED Prep_Switches : aliased constant Switches := (S_Prep_Assoc 'Access, S_Prep_Blank 'Access, S_Prep_Com 'Access, S_Prep_Ref 'Access, S_Prep_Remove 'Access, S_Prep_Replace 'Access, S_Prep_Symbols 'Access, S_Prep_Undef 'Access); ------------------------------ -- Switches for GNAT PRETTY -- ------------------------------ S_Pretty_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Pretty_Align : aliased constant S := "/ALIGN=" & "DEFAULT " & "-A12345 " & "OFF " & "-A0 " & "COLONS " & "-A1 " & "DECLARATIONS " & "-A2 " & "STATEMENTS " & "-A3 " & "ARROWS " & "-A4 " & "COMPONENT_CLAUSES " & "-A5"; -- /ALIGN[=align-option, align-option, ...] -- -- Set alignments. By default, all alignments (colons in declarations, -- initialisations in declarations, assignments and arrow delimiters) are -- ON. -- -- align-option may be one of the following: -- -- OFF (D) Set all alignments to OFF -- COLONS Set alignments of colons in declarations to ON -- DECLARATIONS Set alignments of initialisations in declarations -- to ON -- STATEMENTS Set alignments of assignments statements to ON -- ARROWS Set alignments of arrow delimiters to ON. -- COMPONENT_CLAUSES Set alignments of AT keywords in component -- clauses ON -- -- Specifying one of the ON options without first specifying the OFF -- option has no effect, because by default all alignments are set to ON. S_Pretty_All_Prjs : aliased constant S := "/ALL_PROJECTS " & "-U"; -- /NOALL_PROJECTS (D) -- /ALL_PROJECTS -- When GNAT PRETTY is used with a Project File and no source is -- specified, the underlying tool gnatpp is called for all the -- sources of all the Project Files in the project tree. S_Pretty_Attrib : aliased constant S := "/ATTRIBUTE_CASING=" & "MIXED_CASE " & "-aM " & "LOWER_CASE " & "-aL " & "UPPER_CASE " & "-aU"; -- /ATTRIBUTE_CASING[=casing-option] -- -- Set the case of the attributes. By default the attributes are in mixed -- case. -- casing-option may be one of the following: -- -- MIXED_CASE (D) -- LOWER_CASE -- UPPER_CASE S_Pretty_Comments : aliased constant S := "/COMMENTS_LAYOUT=" & "UNTOUCHED " & "-c0 " & "DEFAULT " & "-c1 " & "STANDARD_INDENT " & "-c2 " & "GNAT_BEGINNING " & "-c3 " & "REFORMAT " & "-c4 " & "KEEP_SPECIAL " & "-c5"; -- /COMMENTS_LAYOUT[=layout-option, layout-option, ...] -- -- Set the comment layout. By default, comments use the GNAT style -- comment line indentation. -- -- layout-option may be one of the following: -- -- UNTOUCHED All the comments remain unchanged -- DEFAULT (D) GNAT style comment line indentation -- STANDARD_INDENT Standard comment line indentation -- GNAT_BEGINNING GNAT style comment beginning -- REFORMAT Reformat comment blocks -- KEEP_SPECIAL Keep unchanged special form comments -- -- All combinations of layout options are allowed, except for DEFAULT -- and STANDARD_INDENT which are mutually exclusive, and also if -- UNTOUCHED is specified, this must be the only option. -- -- The difference between "GNAT style comment line indentation" and -- "standard comment line indentation" is the following: for standard -- comment indentation, any comment line is indented as if it were -- a declaration or statement at the same place. -- For GNAT style comment indentation, comment lines which are -- immediately followed by if or case statement alternative, record -- variant or 'begin' keyword are indented as the keyword that follows -- them.: -- -- Standard indentation: -- -- if A then -- null; -- -- some comment -- else -- null; -- end if; -- -- GNAT style indentation: -- -- if A then -- null; -- -- some comment -- else -- null; -- end if; -- -- Option "GNAT style comment beginning" means that for each comment -- which is not considered as non-formattable separator (that is, the -- comment line contains only dashes, or a comment line ends with two -- dashes), there will be at least two spaces between starting "--" and -- the first non-blank character of the comment. S_Pretty_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" & "-gnatec>"; -- /CONFIGURATION_PRAGMAS_FILE=file -- -- Specify a configuration pragmas file that need to be passed to the -- compiler. S_Pretty_Constr : aliased constant S := "/CONSTRUCT_LAYOUT=" & "GNAT " & "-l1 " & "COMPACT " & "-l2 " & "UNCOMPACT " & "-l3"; -- /CONSTRUCT_LAYOUT[=construct-option] -- -- Set construct layout. Default is GNAT style layout. -- construct-option may be one of the following: -- -- GNAT (D) -- COMPACT -- UNCOMPACT -- -- The difference between GNAT style and Compact layout on one hand -- and Uncompact layout on the other hand can be illustrated by the -- following examples: -- -- GNAT style and Uncompact layout -- Compact layout -- -- type q is record type q is -- a : integer; record -- b : integer; a : integer; -- end record; b : integer; -- end record; -- -- -- Block : declare Block : -- A : Integer := 3; declare -- begin A : Integer := 3; -- Proc (A, A); begin -- end Block; Proc (A, A); -- end Block; -- -- Clear : for J in 1 .. 10 loop Clear : -- A (J) := 0; for J in 1 .. 10 loop -- end loop Clear; A (J) := 0; -- end loop Clear; -- -- -- A further difference between GNAT style layout and compact layout is -- that in GNAT style layout compound statements, return statements and -- bodies are always separated by empty lines. S_Pretty_Comind : aliased constant S := "/CONTINUATION_INDENT=#" & "-cl#"; -- /CONTINUATION_INDENT=nnn -- -- Indentation level for continuation lines, nnn from 1 .. 9. -- The default value is one less then the (normal) indentation level, -- unless the indentation is set to 1: in that case the default value for -- continuation line indentation is also 1. S_Pretty_Compact_Is : aliased constant S := "/NO_SEPARATE_IS " & "--no-separate-is"; -- /NO_SEPARATE_IS -- -- Do not place the IS keyword on a separate line in a subprogram body in -- case if the specification occupies more then one line. S_Pretty_Sep_Label : aliased constant S := "/SEPARATE_LABEL " & "--separate-label"; -- /SEPARATE_LABEL -- -- Place statement label(s) and the statement itself on separate lines. S_Pretty_Sep_Loop_Then : aliased constant S := "/SEPARATE_LOOP_THEN " & "--separate-loop-then"; -- /SEPARATE_LOOP_THEN -- -- Place the THEN keyword in IF statement and the LOOP keyword in for- -- and while-loops on a separate line. S_Pretty_N_Sep_Loop_Then : aliased constant S := "/NO_SEPARATE_LOOP_THEN " & "--no-separate-loop-then"; -- /NO_SEPARATE_LOOP_THEN -- -- Do not place the THEN keyword in IF statement and the LOOP keyword in -- for- and while-loops on a separate line. S_Pretty_Use_On_New_Line : aliased constant S := "/USE_ON_NEW_LINE " & "--use-on-new-line"; -- /USE_ON_NEW_LINE -- -- Start any USE clause that is a part of a context clause from a -- separate line. S_Pretty_Stnm_On_Nw_Line : aliased constant S := "/STMT_NAME_ON_NEW_LINE " & "--separate-stmt-name"; -- /STMT_NAME_ON_NEW_LINE -- -- For named block and loop statements use a separate line for the -- statement name, but do not use an extra indentation level for the -- statement itself. S_Pretty_Eol : aliased constant S := "/END_OF_LINE=" & "DOS " & "--eol=dos " & "UNIX " & "--eol=unix " & "CRLF " & "--eol=crlf " & "LF " & "--eol=lf"; -- /END_OF_LINE=[option] -- -- Specifies the form of the line terminators in the produced source. -- By default, the form of the line terminator depends on the platforms. -- On Unix and VMS, it is a Line Feed (LF) character. On Windows (DOS), -- It is a Carriage Return (CR) followed by a Line Feed. -- The Options DOS and CRLF are equivalent. The options UNIX and LF are -- also equivalent. S_Pretty_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Pretty_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- -- Look for source files in the current working directory. -- -- /NOCURRENT_DIRECTORY -- Do not look for source files in the current working directory. S_Pretty_Dico : aliased constant S := "/DICTIONARY=*" & "-D*"; -- /DICTIONARY=(file_name, ...) -- -- Use each specified file as a dictionary file that defines the casing -- for a set of specified names, thereby overriding the effect on these -- names by any explicit or implicit /NAME_CASING qualifier. -- -- GNAT PRETTY implicitly uses a default dictionary file to define the -- casing for the Ada predefined names and the names declared in the GNAT -- libraries. -- -- The structure of a dictionary file, and details on the conventions -- used in the default dictionary file, are defined in the GNAT User's -- Guide. S_Pretty_Encoding : aliased constant S := "/RESULT_ENCODING=" & "BRACKETS " & "-Wb " & "HEX " & "-Wh " & "UPPER " & "-Wu " & "SHIFT_JIS " & "-Ws " & "EUC " & "-We " & "UTF8 " & "-W8"; -- /RESULT_ENCODING[=encoding-type] -- -- Specify the wide character encoding method used when writing the -- reformatted code in the result file. 'encoding-type' is one of the -- following: -- -- BRACKETS (D) Brackets encoding. -- -- HEX Hex ESC encoding. -- -- UPPER Upper half encoding. -- -- SHIFT_JIS Shift-JIS encoding. -- -- EUC EUC Encoding. -- -- UTF8 UTF-8 encoding. -- -- See 'HELP GNAT COMPILE /WIDE_CHARACTER_ENCODING' for an explanation -- about the different character encoding methods. S_Pretty_Enums : aliased constant S := "/ENUM_CASING=" & "AS_DECLARED " & "-neD " & "LOWER_CASE " & "-neL " & "UPPER_CASE " & "-neU " & "MIXED_CASE " & "-neM"; -- /ENUM_CASING=name-option -- -- Specify the casing of enumeration literals. If not specified, the -- casing of enumeration literals is defined by the NAME_CASING option. -- 'name-option' may be one of: -- -- AS_DECLARED Literals casing for defining occurrences are -- as they appear in the source file. -- -- LOWER_CASE Literals are in lower case. -- -- UPPER_CASE Literals are in upper case. -- -- MIXED_CASE Literals are in mixed case. S_Pretty_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_Pretty_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Pretty_Forced : aliased constant S := "/FORCED_OUTPUT=@" & "-of@"; -- /FORCED_OUTPUT=file -- -- Write the output into the specified file, overriding any possibly -- existing file. S_Pretty_Formfeed : aliased constant S := "/FORM_FEED_AFTER_PRAGMA_PAGE " & "-ff"; -- /FORM_FEED_AFTER_PRAGMA_PAGE -- -- When there is a pragma Page in the source, insert a Form Feed -- character immediately after the semicolon that follows the pragma -- Page. S_Pretty_Indent : aliased constant S := "/INDENTATION_LEVEL=#" & "-i#"; -- /INDENTATION_LEVEL=nnn -- -- Specify the number of spaces to add for each indentation level. -- nnn must be between 1 and 9. The default is 3. S_Pretty_Keyword : aliased constant S := "/KEYWORD_CASING=" & "LOWER_CASE " & "-kL " & "UPPER_CASE " & "-kU"; -- /KEYWORD_CASING[=keyword-option] -- -- Specify the case of Ada keywords. The default is keywords in lower -- case. -- -- keyword-option may be one of the following: -- -- LOWER_CASE (D) -- UPPER_CASE S_Pretty_Maxlen : aliased constant S := "/LINE_LENGTH_MAX=#" & "-M#"; -- /LINE_LENGTH_MAX=nnn -- -- Set the maximum line length, nnn from 32 ..256. The default is 79. S_Pretty_Maxact : aliased constant S := "/MAX_ACT=#" & "--call_threshold=#"; -- /MAX_ACT=nnn -- -- If the number of parameter associations is greater than nnn and if at -- least one association uses named notation, start each association from -- a new line S_Pretty_Maxind : aliased constant S := "/MAX_INDENT=#" & "-T#"; -- /MAX_INDENT=nnn -- -- Do not use an additional indentation level for case alternatives -- and variants if their number is nnn or more. The default is 10. -- If nnn is zero, an additional indentation level is used for any -- number of case alternatives and variants. S_Pretty_Maxpar : aliased constant S := "/MAX_PAR=#" & "--par_threshold=#"; -- /MAX_PAR=nnn -- -- If the number of parameter specifications is greater than nnn (or equal -- to nnn in case of a function), start each specification from a new line. -- The default value is 3. S_Pretty_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Pretty_Names : aliased constant S := "/NAME_CASING=" & "AS_DECLARED " & "-nD " & "LOWER_CASE " & "-nL " & "UPPER_CASE " & "-nU " & "MIXED_CASE " & "-nM"; -- /NAME_CASING[=name-option] -- -- Specify the casing of names. -- 'name-option' may be one of: -- -- AS_DECLARED (D) Name casing for defining occurrences are as they -- appear in the source file. -- -- LOWER_CASE Names are in lower case. -- -- UPPER_CASE Names are in upper case. -- -- MIXED_CASE Names are in mixed case. S_Pretty_Replace_No_Backup : aliased constant S := "/REPLACE_NO_BACKUP " & "-rnb"; -- /REPLACE_NO_BACKUP -- -- Replace the argument source with the pretty-printed source without -- creating any backup copy of the argument source. S_Pretty_No_Labels : aliased constant S := "/NO_MISSED_LABELS " & "-e"; -- /NO_MISSED_LABELS -- -- Do not insert missing end/exit labels. The end label is the name of -- a construct that may optionally appear at the end of the construct. -- This includes the names of packages and subprograms. -- Similarly, the exit label is the name of a loop that may appear as the -- argument of an exit statement within the loop. By default, GNAT PRETTY -- inserts these end/exit labels when they are absent in the original -- source. This qualifier /NO_MISSED_LABELS suppresses this insertion, -- so that the formatted source reflects the original. S_Pretty_Notabs : aliased constant S := "/NOTABS " & "-notabs"; -- /NOTABS -- -- Replace all tabulations in comments with spaces. S_Pretty_Output : aliased constant S := "/OUTPUT=@" & "-o@"; -- /OUTPUT=file -- -- Write the output to the specified file. If the file already exists, -- an error is reported. S_Pretty_Override : aliased constant S := "/OVERRIDING_REPLACE " & "-rf"; -- /NOOVERRIDING_REPLACE (D) -- /OVERRIDING_REPLACE -- -- Replace the argument source with the pretty-printed source and copy the -- argument source into filename.NPP, overriding any existing file if -- needed. S_Pretty_Pragma : aliased constant S := "/PRAGMA_CASING=" & "MIXED_CASE " & "-pM " & "LOWER_CASE " & "-pL " & "UPPER_CASE " & "-pU"; -- /PRAGMA_CASING[=pragma-option] -- -- Set the case of pragma identifiers. The default is Mixed case. -- pragma-option may be one of the following: -- -- MIXED_CASE (D) -- LOWER_CASE -- UPPER_CASE S_Pretty_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before any other processing to -- set the building environment. S_Pretty_Replace : aliased constant S := "/REPLACE " & "-r"; -- /NOREPLACE (D) -- /REPLACE -- -- Replace the argument source with the pretty-printed source and copy the -- argument source into filename.NPP. If filename.NPP already exists, -- report an error and exit. S_Pretty_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" & "--RTS=|"; -- /RUNTIME_SYSTEM=xxx -- -- Compile against an alternate runtime system named xxx or RTS-xxx. S_Pretty_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory[,...]) -- -- When looking for source files also look in directories specified. S_Pretty_Specific : aliased constant S := "/SPECIFIC_CASING " & "-D-"; -- /SPECIFIC_CASING -- -- Do not use the default dictionary file; instead, use the casing -- defined by a qualifier /NAME_CASING and/or any explicit dictionary -- file specified by a qualifier /DICTIONARY. S_Pretty_Standard : aliased constant S := "/STANDARD_OUTPUT " & "-pipe"; -- /NOSTANDARD_OUTPUT (D) -- /STANDARD_OUTPUT -- -- Redirect the output to the standard output. S_Pretty_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Pretty_Types : aliased constant S := "/TYPE_CASING=" & "AS_DECLARED " & "-ntD " & "LOWER_CASE " & "-ntL " & "UPPER_CASE " & "-ntU " & "MIXED_CASE " & "-ntM"; -- /TYPE_CASING=name-option -- -- Specify the casing of subtype names (including first subtypes from -- type declarations). If not specified, the casing of these names is -- defined by the NAME_CASING option. 'name-option' is one of: -- -- AS_DECLARED Names are cased as they appear in the declaration -- in the source file. -- -- LOWER_CASE Names are in lower case. -- -- UPPER_CASE Names are in upper case. -- -- MIXED_CASE Names are in mixed case. S_Pretty_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Verbose mode; GNAT PRETTY generates version information and then a -- trace of the actions it takes to produce or obtain the ASIS tree. S_Pretty_Warnings : aliased constant S := "/WARNINGS " & "-w"; -- /NOWARNINGS (D) -- /WARNINGS -- -- Issue a warning to the standard error stream if it is not possible -- to provide the required layout in the result source. -- By default such warnings are not activated. Pretty_Switches : aliased constant Switches := (S_Pretty_Add 'Access, S_Pretty_Align 'Access, S_Pretty_All_Prjs 'Access, S_Pretty_Attrib 'Access, S_Pretty_Comments 'Access, S_Pretty_Compact_Is 'Access, S_Pretty_Config 'Access, S_Pretty_Constr 'Access, S_Pretty_Comind 'Access, S_Pretty_Current 'Access, S_Pretty_Dico 'Access, S_Pretty_Eol 'Access, S_Pretty_Ext 'Access, S_Pretty_Encoding 'Access, S_Pretty_Enums 'Access, S_Pretty_Files 'Access, S_Pretty_Follow 'Access, S_Pretty_Forced 'Access, S_Pretty_Formfeed 'Access, S_Pretty_Indent 'Access, S_Pretty_Keyword 'Access, S_Pretty_Maxlen 'Access, S_Pretty_Maxact 'Access, S_Pretty_Maxind 'Access, S_Pretty_Maxpar 'Access, S_Pretty_Mess 'Access, S_Pretty_Names 'Access, S_Pretty_No_Labels 'Access, S_Pretty_Notabs 'Access, S_Pretty_Output 'Access, S_Pretty_Override 'Access, S_Pretty_Pragma 'Access, S_Pretty_Replace 'Access, S_Pretty_Replace_No_Backup'Access, S_Pretty_Project 'Access, S_Pretty_RTS 'Access, S_Pretty_Search 'Access, S_Pretty_Sep_Label 'Access, S_Pretty_Sep_Loop_Then 'Access, S_Pretty_N_Sep_Loop_Then 'Access, S_Pretty_Subdirs 'Access, S_Pretty_Use_On_New_Line 'Access, S_Pretty_Stnm_On_Nw_Line 'Access, S_Pretty_Specific 'Access, S_Pretty_Standard 'Access, S_Pretty_Types 'Access, S_Pretty_Verbose 'Access, S_Pretty_Warnings 'Access); ------------------------------ -- Switches for GNAT SHARED -- ------------------------------ S_Shared_Debug : aliased constant S := "/DEBUG=" & "ALL " & "-g3 " & "NONE " & "-g0 " & "TRACEBACK " & "-g1 " & "NOTRACEBACK " & "-g0"; -- /DEBUG[=debug-option] -- /NODEBUG -- -- Specifies the amount of debugging information included. 'debug-option' -- is one of the following: -- -- ALL (D) Include full debugging information. -- -- NONE Provide no debugging information. Same as /NODEBUG. -- -- TRACEBACK Provide sufficient debug information for a traceback. -- -- NOTRACEBACK Same as NONE. S_Shared_Image : aliased constant S := "/IMAGE=@" & "-o@"; -- /IMAGE=image-name -- -- 'image-name' specifies the name for the generated shared library. S_Shared_Ident : aliased constant S := "/IDENTIFICATION=" & '"' & "--for-linker=IDENT=" & '"'; -- /IDENTIFICATION="<string>" -- -- "<string>" specifies the string to be stored in the image file ident- -- ification field in the image header. It overrides any pragma Ident -- specified string. S_Shared_Nofiles : aliased constant S := "/NOSTART_FILES " & "-nostartfiles"; -- /NOSTART_FILES -- -- Link in default image initialization and startup functions. S_Shared_Noinhib : aliased constant S := "/NOINHIBIT-IMAGE " & "--for-linker=--noinhibit-exec"; -- /NOINHIBIT-IMAGE -- -- Delete image if there are errors or warnings. S_Shared_Verb : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Causes additional information to be output, including a full list of -- the included object files. This switch option is most useful when you -- want to see what set of object files are being used in the link step. S_Shared_ZZZZZ : aliased constant S := "/<other> " & "--for-linker="; -- /<other> -- -- Any other switch transmitted to the underlying linker. Shared_Switches : aliased constant Switches := (S_Shared_Debug 'Access, S_Shared_Image 'Access, S_Shared_Ident 'Access, S_Shared_Nofiles 'Access, S_Shared_Noinhib 'Access, S_Shared_Verb 'Access, S_Shared_ZZZZZ 'Access); ----------------------------- -- Switches for GNAT STACK -- ----------------------------- S_Stack_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Stack_All : aliased constant S := "/ALL_SUBPROGRAMS " & "-a"; -- /NOALL_SUBPROGRAMS (D) -- /ALL_SUBPROGRAMS -- -- Consider all subprograms as entry points. S_Stack_All_Cycles : aliased constant S := "/ALL_CYCLES " & "-ca"; -- /NOALL_CYCLES (D) -- /ALL_CYCLES -- -- Extract all possible cycles in the call graph. S_Stack_All_Prjs : aliased constant S := "/ALL_PROJECTS " & "-U"; -- /NOALL_PROJECTS (D) -- /ALL_PROJECTS -- -- When GNAT STACK is used with a Project File and no source is -- specified, the underlying tool gnatstack is called for all the -- units of all the Project Files in the project tree. S_Stack_Debug : aliased constant S := "/DEBUG " & "-g"; -- /NODEBUG (D) -- /DEBUG -- -- Generate internal debug information. S_Stack_Directory : aliased constant S := "/DIRECTORY=*" & "-aO*"; -- /DIRECTORY=(direc[,...]) -- -- When looking for .ci files look also in directories specified. S_Stack_Entries : aliased constant S := "/ENTRIES=*" & "-e*"; -- -- /ENTRY=(entry_point[,...]) -- -- Name of symbol to be used as entry point for the analysis. S_Stack_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_Stack_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Stack_Help : aliased constant S := "/HELP " & "-h"; -- /NOHELP (D) -- /HELP -- -- Output a message explaining the usage of gnatstack. S_Stack_List : aliased constant S := "/LIST=#" & "-l#"; -- /LIST=nnn -- -- Print the nnn subprograms requiring the biggest local stack usage. By -- default none will be displayed. S_Stack_Order : aliased constant S := "/ORDER=" & "STACK " & "-os " & "ALPHABETICAL " & "-oa"; -- /ORDER[=order-option] -- -- Specifies the order for displaying the different call graphs. -- order-option may be one of the following: -- -- STACK (D) Select stack usage order -- -- ALPHABETICAL Select alphabetical order S_Stack_Path : aliased constant S := "/PATH " & "-p"; -- /NOPATH (D) -- /PATH -- -- Print all the subprograms that make up the worst-case path for every -- entry point. S_Stack_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of -- gnatstack. S_Stack_Output : aliased constant S := "/OUTPUT=@" & "-f@"; -- /OUTPUT=filename -- -- Name of the file containing the generated graph (VCG format). S_Stack_Regexp : aliased constant S := "/EXPRESSION=|" & "-r|"; -- -- /EXPRESSION=regular-expression -- -- Any symbol matching the regular expression will be considered as a -- potential entry point for the analysis. S_Stack_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Stack_Unbounded : aliased constant S := "/UNBOUNDED=#" & "-d#"; -- /UNBOUNDED=nnn -- -- Default stack size to be used for unbounded (dynamic) frames. S_Stack_Unknown : aliased constant S := "/UNKNOWN=#" & "-u#"; -- /UNKNOWN=nnn -- -- Default stack size to be used for unknown (external) calls. S_Stack_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Specifies the amount of information to be displayed about the -- different subprograms. In verbose mode the full location of the -- subprogram will be part of the output, as well as detailed information -- about inaccurate data. S_Stack_Warnings : aliased constant S := "/WARNINGS=" & "ALL " & "-Wa " & "CYCLES " & "-Wc " & "UNBOUNDED " & "-Wu " & "EXTERNAL " & "-We " & "INDIRECT " & "-Wi"; -- /WARNINGS[=(keyword[,...])] -- -- The following keywords are supported: -- -- ALL Turn on all optional warnings -- -- CYCLES Turn on warnings for cycles -- -- UNBOUNDED Turn on warnings for unbounded frames -- -- EXTERNAL Turn on warnings for external calls -- -- INDIRECT Turn on warnings for indirect calls Stack_Switches : aliased constant Switches := (S_Stack_Add 'Access, S_Stack_All 'Access, S_Stack_All_Cycles 'Access, S_Stack_All_Prjs 'Access, S_Stack_Debug 'Access, S_Stack_Directory 'Access, S_Stack_Entries 'Access, S_Stack_Files 'Access, S_Stack_Follow 'Access, S_Stack_Help 'Access, S_Stack_List 'Access, S_Stack_Order 'Access, S_Stack_Path 'Access, S_Stack_Project 'Access, S_Stack_Output 'Access, S_Stack_Regexp 'Access, S_Stack_Subdirs 'Access, S_Stack_Unbounded 'Access, S_Stack_Unknown 'Access, S_Stack_Verbose 'Access, S_Stack_Warnings 'Access); ---------------------------- -- Switches for GNAT STUB -- ---------------------------- S_Stub_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Stub_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" & "-gnatec>"; -- /CONFIGURATION_PRAGMAS_FILE=filespec -- -- Specifies a configuration pragmas file that must be taken into account -- when compiling. S_Stub_Current : aliased constant S := "/CURRENT_DIRECTORY " & "!-I-"; -- /CURRENT_DIRECTORY (D) -- /NOCURRENT_DIRECTORY -- -- Look for source, library or object files in the default directory. S_Stub_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Stub_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Stub_Full : aliased constant S := "/FULL " & "-f"; -- /NOFULL (D) -- /FULL -- -- If the destination directory already contains a file with the name of -- the body file for the argument file spec, replace it with the generated -- body stub. If /FULL is not used and there is already a body file, this -- existing body file is not replaced. S_Stub_Header : aliased constant S := "/HEADER=" & "GENERAL " & "-hg " & "SPEC " & "-hs"; -- /HEADER[=header-option] -- -- Specifies the form of the comment header above the generated body stub. -- If no /HEADER qualifier is specified, there is no comment header. -- header-option is one of the following: -- -- -- GENERAL (D) Put a sample comment header into the body stub. -- -- SPEC Put the comment header (i.e., all the comments -- preceding the compilation unit) from the source of the -- library unit declaration into the body stub. S_Stub_Header_File : aliased constant S := "/FROM_HEADER_FILE=<" & "--header-file=>"; -- /FROM_HEADER_FILE==filename -- -- Use the content of the file as the comment header for a generated body -- stub. S_Stub_Indent : aliased constant S := "/INDENTATION=#" & "-i#"; -- /INDENTATION=nnn -- -- (nnn is a non-negative integer). Set the indentation level in the -- generated body stub to nnn. nnn=0 means "no indentation". -- Default indentation is 3. S_Stub_Keep : aliased constant S := "/KEEP " & "-k"; -- /NOKEEP (D) -- /KEEP -- -- Do not delete the tree file (i.e., the snapshot of the compiler -- internal structures used by gnatstub) after creating the body stub. S_Stub_Length : aliased constant S := "/LINE_LENGTH=#" & "-l#"; -- /LINE_LENGTH=nnn -- -- (n is a non-negative integer). Set the maximum line length in the body -- stub to nnn. Default is 78. S_Stub_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Stub_No_Exc : aliased constant S := "/NO_EXCEPTION " & "--no-exception"; -- /NONO_EXCEPTION (D) -- /NO_EXCEPTION -- -- Avoid raising PROGRAM_ERROR in the generated program unit stubs. S_Stub_No_Head : aliased constant S := "/NO_LOCAL_HEADER " & "--no-local-header"; -- /NONO_LOCAL_HEADER (D) -- /NO_LOCAL_HEADER -- -- Do not put local comment header before body stub for local program unit. S_Stub_Output : aliased constant S := "/OUTPUT=@" & "-o@"; -- /OUTPUT=filespec -- -- Body file name. This should be set if the argument file name does not -- follow the GNAT file naming conventions. If this switch is omitted, -- the default name for the body will be obtained from the argument file -- name according to the GNAT file naming conventions. S_Stub_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before any other processing. -- The source and object directories to be searched will be communicated -- to gnatstub through logical names ADA_PRJ_INCLUDE_FILE and -- ADA_PRJ_OBJECTS_FILE. S_Stub_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Quiet mode: do not generate a confirmation when a body is successfully -- created, and do not generate a message when a body is not required for -- an argument unit. S_Stub_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory[,...]) -- -- When looking for source files also look in directories specified. S_Stub_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Stub_Tree : aliased constant S := "/TREE_FILE=" & "OVERWRITE " & "-t " & "SAVE " & "-k " & "REUSE " & "-r"; -- /TREE_FILE[=treefile-option] -- -- Specify what to do with the tree file. -- treefile-option is one of the following: -- -- OVERWRITE (D) Overwrite the existing tree file. If the current -- directory already contains the file which, according -- to the GNAT file naming rules should be considered -- as a tree file for the argument source file, gnatstub -- will refuse to create the tree file needed to create -- a sample body unless this option is chosen. -- -- SAVE Do not remove the tree file (i.e., the snapshot -- of the compiler internal structures used by gnatstub) -- after creating the body stub. -- -- REUSE Reuse the tree file (if it exists) instead of -- creating it. -- Instead of creating the tree file for the library -- unit declaration, gnatstub tries to find it in the -- current directory and use it for creating a body. -- If the tree file is not found, no body is created. -- This option also implies `SAVE', whether or not the -- latter is set explicitly. S_Stub_Verbose : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- Verbose mode: generate version information. Stub_Switches : aliased constant Switches := (S_Stub_Add 'Access, S_Stub_Config 'Access, S_Stub_Current 'Access, S_Stub_Ext 'Access, S_Stub_Follow 'Access, S_Stub_Full 'Access, S_Stub_Header 'Access, S_Stub_Header_File'Access, S_Stub_Indent 'Access, S_Stub_Keep 'Access, S_Stub_Length 'Access, S_Stub_Mess 'Access, S_Stub_Output 'Access, S_Stub_Project 'Access, S_Stub_No_Exc 'Access, S_Stub_No_Head 'Access, S_Stub_Quiet 'Access, S_Stub_Search 'Access, S_Stub_Subdirs 'Access, S_Stub_Tree 'Access, S_Stub_Verbose 'Access); ---------------------------- -- Switches for GNAT SYNC -- ---------------------------- S_Sync_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Sync_All : aliased constant S := "/ALL " & "-a"; -- /NOALL (D) -- /ALL -- -- Also check the components of the GNAT run time and process the needed -- components of the GNAT RTL when building and analyzing the global -- structure for checking the global rules. S_Sync_Allproj : aliased constant S := "/ALL_PROJECTS " & "-U"; -- /NOALL_PROJECTS (D) -- /ALL_PROJECTS -- -- When GNAT SYNC is used with a Project File and no source is -- specified, the underlying tool gnatsync is called for all the -- sources of all the Project Files in the project tree. S_Sync_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Sync_Files : aliased constant S := "/FILES=@" & "-files=@"; -- /FILES=filename -- -- Take as arguments the files that are listed in the specified -- text file. S_Sync_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Sync_Main : aliased constant S := "/MAIN_SUBPROGRAM=@" & "-main=@"; -- /MAIN_SUBPROGRAM=filename -- -- Specify the name of the file containing the main subprogram S_Sync_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Sync_Project : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before the invocation of the -- gnatcheck. The source directories to be searched will be communicated -- to gnatcheck through logical name ADA_PRJ_INCLUDE_FILE. S_Sync_Quiet : aliased constant S := "/QUIET " & "-q"; -- /NOQUIET (D) -- /QUIET -- -- Work quietly, only output warnings and errors. S_Sync_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Sync_Verb : aliased constant S := "/VERBOSE " & "-v"; -- /NOVERBOSE (D) -- /VERBOSE -- -- The version number and copyright notice are output, as well as exact -- copies of the gnat1 commands spawned to obtain the chop control -- information. S_Sync_Exec : aliased constant S := "/EXECUTION_TIME " & "-t"; -- /NOEXECUTION_TIME (D) -- /EXECUTION_TIME -- -- Output the execution time S_Sync_Details : aliased constant S := "/DETAILS=" & "MEDIUM " & "-om " & "SHORT " & "-os " & "FULL " & "-of"; -- /DETAILS[=options] -- -- Specifies the details of the output. -- Options may be one of the following: -- -- MEDIUM (D) -- SHORT -- FULL S_Sync_Warnoff : aliased constant S := "/WARNINGS_OFF " & "-wq"; -- -- /WARNINGS_OFF -- -- Turn warnings off S_Sync_Output : aliased constant S := "/OUTPUT_FILE=<" & "-out_file=>"; -- -- /OUTPUT_FILE=filename -- -- Redirect output to a text file Sync_Switches : aliased constant Switches := (S_Sync_Add 'Access, S_Sync_All 'Access, S_Sync_Allproj 'Access, S_Sync_Ext 'Access, S_Sync_Follow 'Access, S_Sync_Files 'Access, S_Sync_Main 'Access, S_Sync_Mess 'Access, S_Sync_Project 'Access, S_Sync_Quiet 'Access, S_Sync_Subdirs 'Access, S_Sync_Verb 'Access, S_Sync_Exec 'Access, S_Sync_Details 'Access, S_Sync_Warnoff 'Access, S_Sync_Output 'Access); ---------------------------- -- Switches for GNAT XREF -- ---------------------------- S_Xref_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" & "-aP*"; -- /ADD_PROJECT_SEARCH_PATH=(directory[,...]) -- -- Add directories to the project search path. S_Xref_All : aliased constant S := "/ALL_FILES " & "-a"; -- /NOALL_FILES (D) -- /ALL_FILES -- -- If this switch is present, FIND and XREF will parse the read-only -- files found in the library search path. Otherwise, these files will -- be ignored. This option can be used to protect Gnat sources or your -- own libraries from being parsed, thus making FIND and XREF much -- faster, and their output much smaller. S_Xref_Deriv : aliased constant S := "/DERIVED_TYPES " & "-d"; -- /NODERIVED_TYPES (D) -- /DERIVED_TYPES -- -- Output the parent type reference for each matching derived types. S_Xref_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' & "-X" & '"'; -- /EXTERNAL_REFERENCE="name=val" -- -- Specifies an external reference to the project manager. Useful only if -- /PROJECT_FILE is used. -- -- Example: -- /EXTERNAL_REFERENCE="DEBUG=TRUE" S_Xref_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " & "-eL"; -- /NOFOLLOW_LINKS_FOR_FILES (D) -- /FOLLOW_LINKS_FOR_FILES -- -- Follow links when parsing project files S_Xref_Full : aliased constant S := "/FULL_PATHNAME " & "-f"; -- /NOFULL_PATHNAME (D) -- /FULL_PATHNAME -- -- If this switch is set, the output file names will be preceded by their -- directory (if the file was found in the search path). If this switch -- is not set, the directory will not be printed. S_Xref_Global : aliased constant S := "/IGNORE_LOCALS " & "-g"; -- /NOIGNORE_LOCALS (D) -- /IGNORE_LOCALS -- -- If this switch is set, information is output only for library-level -- entities, ignoring local entities. The use of this switch may -- accelerate FIND and XREF. S_Xref_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & "-vP0 " & "MEDIUM " & "-vP1 " & "HIGH " & "-vP2"; -- /MESSAGES_PROJECT_FILE[=messages-option] -- -- Specifies the "verbosity" of the parsing of project files. -- messages-option may be one of the following: -- -- DEFAULT (D) No messages are output if there is no error or warning. -- -- MEDIUM A small number of messages are output. -- -- HIGH A great number of messages are output, most of them not -- being useful for the user. S_Xref_Nostinc : aliased constant S := "/NOSTD_INCLUDES " & "-nostdinc"; -- /NOSTD_INCLUDES -- -- Do not look for sources in the system default directory. S_Xref_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " & "-nostdlib"; -- /NOSTD_LIBRARIES -- -- Do not look for library files in the system default directory. S_Xref_Object : aliased constant S := "/OBJECT_SEARCH=*" & "-aO*"; -- /OBJECT_SEARCH=(directory,...) -- -- When searching for library and object files, look in the specified -- directories. The order in which library files are searched is the same -- as for MAKE. S_Xref_Project : aliased constant S := "/PROJECT=@" & "-p@"; -- /PROJECT=file -- -- Specify a project file to use. By default, FIND and XREF will try to -- locate a project file in the current directory. -- -- If a project file is either specified or found by the tools, then the -- content of the source directory and object directory lines are added -- as if they had been specified respectively by /SOURCE_SEARCH and -- /OBJECT_SEARCH. S_Xref_Prj : aliased constant S := "/PROJECT_FILE=<" & "-P>"; -- /PROJECT_FILE=filename -- -- Specifies the main project file to be used. The project files rooted -- at the main project file will be parsed before doing any processing. -- The source and object directories to be searched will be communicated -- to gnatxref through logical names ADA_PRJ_INCLUDE_FILE and -- ADA_PRJ_OBJECTS_FILE. S_Xref_Search : aliased constant S := "/SEARCH=*" & "-I*"; -- /SEARCH=(directory,...) -- -- Equivalent to: -- /OBJECT_SEARCH=(directory,...) /SOURCE_SEARCH=(directory,...) S_Xref_Source : aliased constant S := "/SOURCE_SEARCH=*" & "-aI*"; -- /SOURCE_SEARCH=(directory,...) -- -- When looking for source files also look in the specified directories. -- The order in which source file search is undertaken is the same as for -- MAKE. S_Xref_Subdirs : aliased constant S := "/SUBDIRS=<" & "--subdirs=>"; -- /SUBDIRS=dir -- -- The actual directories (object, exec, library, ...) are subdirectories -- of the directory specified in the project file. If the subdirectory -- does not exist, it is created automatically. S_Xref_Output : aliased constant S := "/UNUSED " & "-u"; -- /SOURCE_SEARCH=(directory,...) -- -- When looking for source files also look in the specified directories. -- The order in which source file search is undertaken is the same as for -- MAKE. S_Xref_Tags : aliased constant S := "/TAGS " & "-v"; -- /NOTAGS (D) -- /TAGS -- -- Print a 'tags' file for vi. Xref_Switches : aliased constant Switches := (S_Xref_Add 'Access, S_Xref_All 'Access, S_Xref_Deriv 'Access, S_Xref_Ext 'Access, S_Xref_Follow 'Access, S_Xref_Full 'Access, S_Xref_Global 'Access, S_Xref_Mess 'Access, S_Xref_Nostinc 'Access, S_Xref_Nostlib 'Access, S_Xref_Object 'Access, S_Xref_Project 'Access, S_Xref_Prj 'Access, S_Xref_Search 'Access, S_Xref_Source 'Access, S_Xref_Subdirs 'Access, S_Xref_Output 'Access, S_Xref_Tags 'Access); end VMS_Data;
Go to most recent revision | Compare with Previous | Blame | View Log