URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [auto-inc-dec.c] - Rev 791
Go to most recent revision | Compare with Previous | Blame | View Log
/* Discovery of auto-inc and auto-dec instructions. Copyright (C) 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. Contributed by Kenneth Zadeck <zadeck@naturalbridge.com> This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "tree.h" #include "rtl.h" #include "tm_p.h" #include "hard-reg-set.h" #include "basic-block.h" #include "insn-config.h" #include "regs.h" #include "flags.h" #include "output.h" #include "function.h" #include "except.h" #include "diagnostic-core.h" #include "recog.h" #include "expr.h" #include "timevar.h" #include "tree-pass.h" #include "df.h" #include "dbgcnt.h" #include "target.h" /* This pass was originally removed from flow.c. However there is almost nothing that remains of that code. There are (4) basic forms that are matched: (1) FORM_PRE_ADD a <- b + c ... *a becomes a <- b ... *(a += c) pre (2) FORM_PRE_INC a += c ... *a becomes *(a += c) pre (3) FORM_POST_ADD *a ... b <- a + c (For this case to be true, b must not be assigned or used between the *a and the assignment to b. B must also be a Pmode reg.) becomes b <- a ... *(b += c) post (4) FORM_POST_INC *a ... a <- a + c becomes *(a += c) post There are three types of values of c. 1) c is a constant equal to the width of the value being accessed by the pointer. This is useful for machines that have HAVE_PRE_INCREMENT, HAVE_POST_INCREMENT, HAVE_PRE_DECREMENT or HAVE_POST_DECREMENT defined. 2) c is a constant not equal to the width of the value being accessed by the pointer. This is useful for machines that have HAVE_PRE_MODIFY_DISP, HAVE_POST_MODIFY_DISP defined. 3) c is a register. This is useful for machines that have HAVE_PRE_MODIFY_REG, HAVE_POST_MODIFY_REG The is one special case: if a already had an offset equal to it +- its width and that offset is equal to -c when the increment was before the ref or +c if the increment was after the ref, then if we can do the combination but switch the pre/post bit. */ #ifdef AUTO_INC_DEC enum form { FORM_PRE_ADD, FORM_PRE_INC, FORM_POST_ADD, FORM_POST_INC, FORM_last }; /* The states of the second operands of mem refs and inc insns. If no second operand of the mem_ref was found, it is assumed to just be ZERO. SIZE is the size of the mode accessed in the memref. The ANY is used for constants that are not +-size or 0. REG is used if the forms are reg1 + reg2. */ enum inc_state { INC_ZERO, /* == 0 */ INC_NEG_SIZE, /* == +size */ INC_POS_SIZE, /* == -size */ INC_NEG_ANY, /* == some -constant */ INC_POS_ANY, /* == some +constant */ INC_REG, /* == some register */ INC_last }; /* The eight forms that pre/post inc/dec can take. */ enum gen_form { NOTHING, SIMPLE_PRE_INC, /* ++size */ SIMPLE_POST_INC, /* size++ */ SIMPLE_PRE_DEC, /* --size */ SIMPLE_POST_DEC, /* size-- */ DISP_PRE, /* ++con */ DISP_POST, /* con++ */ REG_PRE, /* ++reg */ REG_POST /* reg++ */ }; /* Tmp mem rtx for use in cost modeling. */ static rtx mem_tmp; static enum inc_state set_inc_state (HOST_WIDE_INT val, int size) { if (val == 0) return INC_ZERO; if (val < 0) return (val == -size) ? INC_NEG_SIZE : INC_NEG_ANY; else return (val == size) ? INC_POS_SIZE : INC_POS_ANY; } /* The DECISION_TABLE that describes what form, if any, the increment or decrement will take. It is a three dimensional table. The first index is the type of constant or register found as the second operand of the inc insn. The second index is the type of constant or register found as the second operand of the memory reference (if no second operand exists, 0 is used). The third index is the form and location (relative to the mem reference) of inc insn. */ static bool initialized = false; static enum gen_form decision_table[INC_last][INC_last][FORM_last]; static void init_decision_table (void) { enum gen_form value; if (HAVE_PRE_INCREMENT || HAVE_PRE_MODIFY_DISP) { /* Prefer the simple form if both are available. */ value = (HAVE_PRE_INCREMENT) ? SIMPLE_PRE_INC : DISP_PRE; decision_table[INC_POS_SIZE][INC_ZERO][FORM_PRE_ADD] = value; decision_table[INC_POS_SIZE][INC_ZERO][FORM_PRE_INC] = value; decision_table[INC_POS_SIZE][INC_POS_SIZE][FORM_POST_ADD] = value; decision_table[INC_POS_SIZE][INC_POS_SIZE][FORM_POST_INC] = value; } if (HAVE_POST_INCREMENT || HAVE_POST_MODIFY_DISP) { /* Prefer the simple form if both are available. */ value = (HAVE_POST_INCREMENT) ? SIMPLE_POST_INC : DISP_POST; decision_table[INC_POS_SIZE][INC_ZERO][FORM_POST_ADD] = value; decision_table[INC_POS_SIZE][INC_ZERO][FORM_POST_INC] = value; decision_table[INC_POS_SIZE][INC_NEG_SIZE][FORM_PRE_ADD] = value; decision_table[INC_POS_SIZE][INC_NEG_SIZE][FORM_PRE_INC] = value; } if (HAVE_PRE_DECREMENT || HAVE_PRE_MODIFY_DISP) { /* Prefer the simple form if both are available. */ value = (HAVE_PRE_DECREMENT) ? SIMPLE_PRE_DEC : DISP_PRE; decision_table[INC_NEG_SIZE][INC_ZERO][FORM_PRE_ADD] = value; decision_table[INC_NEG_SIZE][INC_ZERO][FORM_PRE_INC] = value; decision_table[INC_NEG_SIZE][INC_NEG_SIZE][FORM_POST_ADD] = value; decision_table[INC_NEG_SIZE][INC_NEG_SIZE][FORM_POST_INC] = value; } if (HAVE_POST_DECREMENT || HAVE_POST_MODIFY_DISP) { /* Prefer the simple form if both are available. */ value = (HAVE_POST_DECREMENT) ? SIMPLE_POST_DEC : DISP_POST; decision_table[INC_NEG_SIZE][INC_ZERO][FORM_POST_ADD] = value; decision_table[INC_NEG_SIZE][INC_ZERO][FORM_POST_INC] = value; decision_table[INC_NEG_SIZE][INC_POS_SIZE][FORM_PRE_ADD] = value; decision_table[INC_NEG_SIZE][INC_POS_SIZE][FORM_PRE_INC] = value; } if (HAVE_PRE_MODIFY_DISP) { decision_table[INC_POS_ANY][INC_ZERO][FORM_PRE_ADD] = DISP_PRE; decision_table[INC_POS_ANY][INC_ZERO][FORM_PRE_INC] = DISP_PRE; decision_table[INC_POS_ANY][INC_POS_ANY][FORM_POST_ADD] = DISP_PRE; decision_table[INC_POS_ANY][INC_POS_ANY][FORM_POST_INC] = DISP_PRE; decision_table[INC_NEG_ANY][INC_ZERO][FORM_PRE_ADD] = DISP_PRE; decision_table[INC_NEG_ANY][INC_ZERO][FORM_PRE_INC] = DISP_PRE; decision_table[INC_NEG_ANY][INC_NEG_ANY][FORM_POST_ADD] = DISP_PRE; decision_table[INC_NEG_ANY][INC_NEG_ANY][FORM_POST_INC] = DISP_PRE; } if (HAVE_POST_MODIFY_DISP) { decision_table[INC_POS_ANY][INC_ZERO][FORM_POST_ADD] = DISP_POST; decision_table[INC_POS_ANY][INC_ZERO][FORM_POST_INC] = DISP_POST; decision_table[INC_POS_ANY][INC_NEG_ANY][FORM_PRE_ADD] = DISP_POST; decision_table[INC_POS_ANY][INC_NEG_ANY][FORM_PRE_INC] = DISP_POST; decision_table[INC_NEG_ANY][INC_ZERO][FORM_POST_ADD] = DISP_POST; decision_table[INC_NEG_ANY][INC_ZERO][FORM_POST_INC] = DISP_POST; decision_table[INC_NEG_ANY][INC_POS_ANY][FORM_PRE_ADD] = DISP_POST; decision_table[INC_NEG_ANY][INC_POS_ANY][FORM_PRE_INC] = DISP_POST; } /* This is much simpler than the other cases because we do not look for the reg1-reg2 case. Note that we do not have a INC_POS_REG and INC_NEG_REG states. Most of the use of such states would be on a target that had an R1 - R2 update address form. There is the remote possibility that you could also catch a = a + b; *(a - b) as a postdecrement of (a + b). However, it is unclear if *(a - b) would ever be generated on a machine that did not have that kind of addressing mode. The IA-64 and RS6000 will not do this, and I cannot speak for any other. If any architecture does have an a-b update for, these cases should be added. */ if (HAVE_PRE_MODIFY_REG) { decision_table[INC_REG][INC_ZERO][FORM_PRE_ADD] = REG_PRE; decision_table[INC_REG][INC_ZERO][FORM_PRE_INC] = REG_PRE; decision_table[INC_REG][INC_REG][FORM_POST_ADD] = REG_PRE; decision_table[INC_REG][INC_REG][FORM_POST_INC] = REG_PRE; } if (HAVE_POST_MODIFY_REG) { decision_table[INC_REG][INC_ZERO][FORM_POST_ADD] = REG_POST; decision_table[INC_REG][INC_ZERO][FORM_POST_INC] = REG_POST; } initialized = true; } /* Parsed fields of an inc insn of the form "reg_res = reg0+reg1" or "reg_res = reg0+c". */ static struct inc_insn { rtx insn; /* The insn being parsed. */ rtx pat; /* The pattern of the insn. */ bool reg1_is_const; /* True if reg1 is const, false if reg1 is a reg. */ enum form form; rtx reg_res; rtx reg0; rtx reg1; enum inc_state reg1_state;/* The form of the const if reg1 is a const. */ HOST_WIDE_INT reg1_val;/* Value if reg1 is const. */ } inc_insn; /* Dump the parsed inc insn to FILE. */ static void dump_inc_insn (FILE *file) { const char *f = ((inc_insn.form == FORM_PRE_ADD) || (inc_insn.form == FORM_PRE_INC)) ? "pre" : "post"; dump_insn_slim (file, inc_insn.insn); switch (inc_insn.form) { case FORM_PRE_ADD: case FORM_POST_ADD: if (inc_insn.reg1_is_const) fprintf (file, "found %s add(%d) r[%d]=r[%d]+%d\n", f, INSN_UID (inc_insn.insn), REGNO (inc_insn.reg_res), REGNO (inc_insn.reg0), (int) inc_insn.reg1_val); else fprintf (file, "found %s add(%d) r[%d]=r[%d]+r[%d]\n", f, INSN_UID (inc_insn.insn), REGNO (inc_insn.reg_res), REGNO (inc_insn.reg0), REGNO (inc_insn.reg1)); break; case FORM_PRE_INC: case FORM_POST_INC: if (inc_insn.reg1_is_const) fprintf (file, "found %s inc(%d) r[%d]+=%d\n", f, INSN_UID (inc_insn.insn), REGNO (inc_insn.reg_res), (int) inc_insn.reg1_val); else fprintf (file, "found %s inc(%d) r[%d]+=r[%d]\n", f, INSN_UID (inc_insn.insn), REGNO (inc_insn.reg_res), REGNO (inc_insn.reg1)); break; default: break; } } /* Parsed fields of a mem ref of the form "*(reg0+reg1)" or "*(reg0+c)". */ static struct mem_insn { rtx insn; /* The insn being parsed. */ rtx pat; /* The pattern of the insn. */ rtx *mem_loc; /* The address of the field that holds the mem */ /* that is to be replaced. */ bool reg1_is_const; /* True if reg1 is const, false if reg1 is a reg. */ rtx reg0; rtx reg1; /* This is either a reg or a const depending on reg1_is_const. */ enum inc_state reg1_state;/* The form of the const if reg1 is a const. */ HOST_WIDE_INT reg1_val;/* Value if reg1 is const. */ } mem_insn; /* Dump the parsed mem insn to FILE. */ static void dump_mem_insn (FILE *file) { dump_insn_slim (file, mem_insn.insn); if (mem_insn.reg1_is_const) fprintf (file, "found mem(%d) *(r[%d]+%d)\n", INSN_UID (mem_insn.insn), REGNO (mem_insn.reg0), (int) mem_insn.reg1_val); else fprintf (file, "found mem(%d) *(r[%d]+r[%d])\n", INSN_UID (mem_insn.insn), REGNO (mem_insn.reg0), REGNO (mem_insn.reg1)); } /* The following three arrays contain pointers to instructions. They are indexed by REGNO. At any point in the basic block where we are looking these three arrays contain, respectively, the next insn that uses REGNO, the next inc or add insn that uses REGNO and the next insn that sets REGNO. The arrays are not cleared when we move from block to block so whenever an insn is retrieved from these arrays, it's block number must be compared with the current block. */ static rtx *reg_next_use = NULL; static rtx *reg_next_inc_use = NULL; static rtx *reg_next_def = NULL; /* Move dead note that match PATTERN to TO_INSN from FROM_INSN. We do not really care about moving any other notes from the inc or add insn. Moving the REG_EQUAL and REG_EQUIV is clearly wrong and it does not appear that there are any other kinds of relevant notes. */ static void move_dead_notes (rtx to_insn, rtx from_insn, rtx pattern) { rtx note; rtx next_note; rtx prev_note = NULL; for (note = REG_NOTES (from_insn); note; note = next_note) { next_note = XEXP (note, 1); if ((REG_NOTE_KIND (note) == REG_DEAD) && pattern == XEXP (note, 0)) { XEXP (note, 1) = REG_NOTES (to_insn); REG_NOTES (to_insn) = note; if (prev_note) XEXP (prev_note, 1) = next_note; else REG_NOTES (from_insn) = next_note; } else prev_note = note; } } /* Create a mov insn DEST_REG <- SRC_REG and insert it before NEXT_INSN. */ static rtx insert_move_insn_before (rtx next_insn, rtx dest_reg, rtx src_reg) { rtx insns; start_sequence (); emit_move_insn (dest_reg, src_reg); insns = get_insns (); end_sequence (); emit_insn_before (insns, next_insn); return insns; } /* Change mem_insn.mem_loc so that uses NEW_ADDR which has an increment of INC_REG. To have reached this point, the change is a legitimate one from a dataflow point of view. The only questions are is this a valid change to the instruction and is this a profitable change to the instruction. */ static bool attempt_change (rtx new_addr, rtx inc_reg) { /* There are four cases: For the two cases that involve an add instruction, we are going to have to delete the add and insert a mov. We are going to assume that the mov is free. This is fairly early in the backend and there are a lot of opportunities for removing that move later. In particular, there is the case where the move may be dead, this is what dead code elimination passes are for. The two cases where we have an inc insn will be handled mov free. */ basic_block bb = BLOCK_FOR_INSN (mem_insn.insn); rtx mov_insn = NULL; int regno; rtx mem = *mem_insn.mem_loc; enum machine_mode mode = GET_MODE (mem); rtx new_mem; int old_cost = 0; int new_cost = 0; bool speed = optimize_bb_for_speed_p (bb); PUT_MODE (mem_tmp, mode); XEXP (mem_tmp, 0) = new_addr; old_cost = (set_src_cost (mem, speed) + set_rtx_cost (PATTERN (inc_insn.insn), speed)); new_cost = set_src_cost (mem_tmp, speed); /* The first item of business is to see if this is profitable. */ if (old_cost < new_cost) { if (dump_file) fprintf (dump_file, "cost failure old=%d new=%d\n", old_cost, new_cost); return false; } /* Jump thru a lot of hoops to keep the attributes up to date. We do not want to call one of the change address variants that take an offset even though we know the offset in many cases. These assume you are changing where the address is pointing by the offset. */ new_mem = replace_equiv_address_nv (mem, new_addr); if (! validate_change (mem_insn.insn, mem_insn.mem_loc, new_mem, 0)) { if (dump_file) fprintf (dump_file, "validation failure\n"); return false; } /* From here to the end of the function we are committed to the change, i.e. nothing fails. Generate any necessary movs, move any regnotes, and fix up the reg_next_{use,inc_use,def}. */ switch (inc_insn.form) { case FORM_PRE_ADD: /* Replace the addition with a move. Do it at the location of the addition since the operand of the addition may change before the memory reference. */ mov_insn = insert_move_insn_before (inc_insn.insn, inc_insn.reg_res, inc_insn.reg0); move_dead_notes (mov_insn, inc_insn.insn, inc_insn.reg0); regno = REGNO (inc_insn.reg_res); reg_next_def[regno] = mov_insn; reg_next_use[regno] = NULL; regno = REGNO (inc_insn.reg0); reg_next_use[regno] = mov_insn; df_recompute_luids (bb); break; case FORM_POST_INC: regno = REGNO (inc_insn.reg_res); if (reg_next_use[regno] == reg_next_inc_use[regno]) reg_next_inc_use[regno] = NULL; /* Fallthru. */ case FORM_PRE_INC: regno = REGNO (inc_insn.reg_res); reg_next_def[regno] = mem_insn.insn; reg_next_use[regno] = NULL; break; case FORM_POST_ADD: mov_insn = insert_move_insn_before (mem_insn.insn, inc_insn.reg_res, inc_insn.reg0); move_dead_notes (mov_insn, inc_insn.insn, inc_insn.reg0); /* Do not move anything to the mov insn because the instruction pointer for the main iteration has not yet hit that. It is still pointing to the mem insn. */ regno = REGNO (inc_insn.reg_res); reg_next_def[regno] = mem_insn.insn; reg_next_use[regno] = NULL; regno = REGNO (inc_insn.reg0); reg_next_use[regno] = mem_insn.insn; if ((reg_next_use[regno] == reg_next_inc_use[regno]) || (reg_next_inc_use[regno] == inc_insn.insn)) reg_next_inc_use[regno] = NULL; df_recompute_luids (bb); break; case FORM_last: default: gcc_unreachable (); } if (!inc_insn.reg1_is_const) { regno = REGNO (inc_insn.reg1); reg_next_use[regno] = mem_insn.insn; if ((reg_next_use[regno] == reg_next_inc_use[regno]) || (reg_next_inc_use[regno] == inc_insn.insn)) reg_next_inc_use[regno] = NULL; } delete_insn (inc_insn.insn); if (dump_file && mov_insn) { fprintf (dump_file, "inserting mov "); dump_insn_slim (dump_file, mov_insn); } /* Record that this insn has an implicit side effect. */ add_reg_note (mem_insn.insn, REG_INC, inc_reg); if (dump_file) { fprintf (dump_file, "****success "); dump_insn_slim (dump_file, mem_insn.insn); } return true; } /* Try to combine the instruction in INC_INSN with the instruction in MEM_INSN. First the form is determined using the DECISION_TABLE and the results of parsing the INC_INSN and the MEM_INSN. Assuming the form is ok, a prototype new address is built which is passed to ATTEMPT_CHANGE for final processing. */ static bool try_merge (void) { enum gen_form gen_form; rtx mem = *mem_insn.mem_loc; rtx inc_reg = inc_insn.form == FORM_POST_ADD ? inc_insn.reg_res : mem_insn.reg0; /* The width of the mem being accessed. */ int size = GET_MODE_SIZE (GET_MODE (mem)); rtx last_insn = NULL; enum machine_mode reg_mode = GET_MODE (inc_reg); switch (inc_insn.form) { case FORM_PRE_ADD: case FORM_PRE_INC: last_insn = mem_insn.insn; break; case FORM_POST_INC: case FORM_POST_ADD: last_insn = inc_insn.insn; break; case FORM_last: default: gcc_unreachable (); } /* Cannot handle auto inc of the stack. */ if (inc_reg == stack_pointer_rtx) { if (dump_file) fprintf (dump_file, "cannot inc stack %d failure\n", REGNO (inc_reg)); return false; } /* Look to see if the inc register is dead after the memory reference. If it is, do not do the combination. */ if (find_regno_note (last_insn, REG_DEAD, REGNO (inc_reg))) { if (dump_file) fprintf (dump_file, "dead failure %d\n", REGNO (inc_reg)); return false; } mem_insn.reg1_state = (mem_insn.reg1_is_const) ? set_inc_state (mem_insn.reg1_val, size) : INC_REG; inc_insn.reg1_state = (inc_insn.reg1_is_const) ? set_inc_state (inc_insn.reg1_val, size) : INC_REG; /* Now get the form that we are generating. */ gen_form = decision_table [inc_insn.reg1_state][mem_insn.reg1_state][inc_insn.form]; if (dbg_cnt (auto_inc_dec) == false) return false; switch (gen_form) { default: case NOTHING: return false; case SIMPLE_PRE_INC: /* ++size */ if (dump_file) fprintf (dump_file, "trying SIMPLE_PRE_INC\n"); return attempt_change (gen_rtx_PRE_INC (reg_mode, inc_reg), inc_reg); break; case SIMPLE_POST_INC: /* size++ */ if (dump_file) fprintf (dump_file, "trying SIMPLE_POST_INC\n"); return attempt_change (gen_rtx_POST_INC (reg_mode, inc_reg), inc_reg); break; case SIMPLE_PRE_DEC: /* --size */ if (dump_file) fprintf (dump_file, "trying SIMPLE_PRE_DEC\n"); return attempt_change (gen_rtx_PRE_DEC (reg_mode, inc_reg), inc_reg); break; case SIMPLE_POST_DEC: /* size-- */ if (dump_file) fprintf (dump_file, "trying SIMPLE_POST_DEC\n"); return attempt_change (gen_rtx_POST_DEC (reg_mode, inc_reg), inc_reg); break; case DISP_PRE: /* ++con */ if (dump_file) fprintf (dump_file, "trying DISP_PRE\n"); return attempt_change (gen_rtx_PRE_MODIFY (reg_mode, inc_reg, gen_rtx_PLUS (reg_mode, inc_reg, inc_insn.reg1)), inc_reg); break; case DISP_POST: /* con++ */ if (dump_file) fprintf (dump_file, "trying POST_DISP\n"); return attempt_change (gen_rtx_POST_MODIFY (reg_mode, inc_reg, gen_rtx_PLUS (reg_mode, inc_reg, inc_insn.reg1)), inc_reg); break; case REG_PRE: /* ++reg */ if (dump_file) fprintf (dump_file, "trying PRE_REG\n"); return attempt_change (gen_rtx_PRE_MODIFY (reg_mode, inc_reg, gen_rtx_PLUS (reg_mode, inc_reg, inc_insn.reg1)), inc_reg); break; case REG_POST: /* reg++ */ if (dump_file) fprintf (dump_file, "trying POST_REG\n"); return attempt_change (gen_rtx_POST_MODIFY (reg_mode, inc_reg, gen_rtx_PLUS (reg_mode, inc_reg, inc_insn.reg1)), inc_reg); break; } } /* Return the next insn that uses (if reg_next_use is passed in NEXT_ARRAY) or defines (if reg_next_def is passed in NEXT_ARRAY) REGNO in BB. */ static rtx get_next_ref (int regno, basic_block bb, rtx *next_array) { rtx insn = next_array[regno]; /* Lazy about cleaning out the next_arrays. */ if (insn && BLOCK_FOR_INSN (insn) != bb) { next_array[regno] = NULL; insn = NULL; } return insn; } /* Reverse the operands in a mem insn. */ static void reverse_mem (void) { rtx tmp = mem_insn.reg1; mem_insn.reg1 = mem_insn.reg0; mem_insn.reg0 = tmp; } /* Reverse the operands in a inc insn. */ static void reverse_inc (void) { rtx tmp = inc_insn.reg1; inc_insn.reg1 = inc_insn.reg0; inc_insn.reg0 = tmp; } /* Return true if INSN is of a form "a = b op c" where a and b are regs. op is + if c is a reg and +|- if c is a const. Fill in INC_INSN with what is found. This function is called in two contexts, if BEFORE_MEM is true, this is called for each insn in the basic block. If BEFORE_MEM is false, it is called for the instruction in the block that uses the index register for some memory reference that is currently being processed. */ static bool parse_add_or_inc (rtx insn, bool before_mem) { rtx pat = single_set (insn); if (!pat) return false; /* Result must be single reg. */ if (!REG_P (SET_DEST (pat))) return false; if ((GET_CODE (SET_SRC (pat)) != PLUS) && (GET_CODE (SET_SRC (pat)) != MINUS)) return false; if (!REG_P (XEXP (SET_SRC (pat), 0))) return false; inc_insn.insn = insn; inc_insn.pat = pat; inc_insn.reg_res = SET_DEST (pat); inc_insn.reg0 = XEXP (SET_SRC (pat), 0); if (rtx_equal_p (inc_insn.reg_res, inc_insn.reg0)) inc_insn.form = before_mem ? FORM_PRE_INC : FORM_POST_INC; else inc_insn.form = before_mem ? FORM_PRE_ADD : FORM_POST_ADD; if (CONST_INT_P (XEXP (SET_SRC (pat), 1))) { /* Process a = b + c where c is a const. */ inc_insn.reg1_is_const = true; if (GET_CODE (SET_SRC (pat)) == PLUS) { inc_insn.reg1 = XEXP (SET_SRC (pat), 1); inc_insn.reg1_val = INTVAL (inc_insn.reg1); } else { inc_insn.reg1_val = -INTVAL (XEXP (SET_SRC (pat), 1)); inc_insn.reg1 = GEN_INT (inc_insn.reg1_val); } return true; } else if ((HAVE_PRE_MODIFY_REG || HAVE_POST_MODIFY_REG) && (REG_P (XEXP (SET_SRC (pat), 1))) && GET_CODE (SET_SRC (pat)) == PLUS) { /* Process a = b + c where c is a reg. */ inc_insn.reg1 = XEXP (SET_SRC (pat), 1); inc_insn.reg1_is_const = false; if (inc_insn.form == FORM_PRE_INC || inc_insn.form == FORM_POST_INC) return true; else if (rtx_equal_p (inc_insn.reg_res, inc_insn.reg1)) { /* Reverse the two operands and turn *_ADD into *_INC since a = c + a. */ reverse_inc (); inc_insn.form = before_mem ? FORM_PRE_INC : FORM_POST_INC; return true; } else return true; } return false; } /* A recursive function that checks all of the mem uses in ADDRESS_OF_X to see if any single one of them is compatible with what has been found in inc_insn. -1 is returned for success. 0 is returned if nothing was found and 1 is returned for failure. */ static int find_address (rtx *address_of_x) { rtx x = *address_of_x; enum rtx_code code = GET_CODE (x); const char *const fmt = GET_RTX_FORMAT (code); int i; int value = 0; int tem; if (code == MEM && rtx_equal_p (XEXP (x, 0), inc_insn.reg_res)) { /* Match with *reg0. */ mem_insn.mem_loc = address_of_x; mem_insn.reg0 = inc_insn.reg_res; mem_insn.reg1_is_const = true; mem_insn.reg1_val = 0; mem_insn.reg1 = GEN_INT (0); return -1; } if (code == MEM && GET_CODE (XEXP (x, 0)) == PLUS && rtx_equal_p (XEXP (XEXP (x, 0), 0), inc_insn.reg_res)) { rtx b = XEXP (XEXP (x, 0), 1); mem_insn.mem_loc = address_of_x; mem_insn.reg0 = inc_insn.reg_res; mem_insn.reg1 = b; mem_insn.reg1_is_const = inc_insn.reg1_is_const; if (CONST_INT_P (b)) { /* Match with *(reg0 + reg1) where reg1 is a const. */ HOST_WIDE_INT val = INTVAL (b); if (inc_insn.reg1_is_const && (inc_insn.reg1_val == val || inc_insn.reg1_val == -val)) { mem_insn.reg1_val = val; return -1; } } else if (!inc_insn.reg1_is_const && rtx_equal_p (inc_insn.reg1, b)) /* Match with *(reg0 + reg1). */ return -1; } if (code == SIGN_EXTRACT || code == ZERO_EXTRACT) { /* If REG occurs inside a MEM used in a bit-field reference, that is unacceptable. */ if (find_address (&XEXP (x, 0))) return 1; } if (x == inc_insn.reg_res) return 1; /* Time for some deep diving. */ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') { tem = find_address (&XEXP (x, i)); /* If this is the first use, let it go so the rest of the insn can be checked. */ if (value == 0) value = tem; else if (tem != 0) /* More than one match was found. */ return 1; } else if (fmt[i] == 'E') { int j; for (j = XVECLEN (x, i) - 1; j >= 0; j--) { tem = find_address (&XVECEXP (x, i, j)); /* If this is the first use, let it go so the rest of the insn can be checked. */ if (value == 0) value = tem; else if (tem != 0) /* More than one match was found. */ return 1; } } } return value; } /* Once a suitable mem reference has been found and the MEM_INSN structure has been filled in, FIND_INC is called to see if there is a suitable add or inc insn that follows the mem reference and determine if it is suitable to merge. In the case where the MEM_INSN has two registers in the reference, this function may be called recursively. The first time looking for an add of the first register, and if that fails, looking for an add of the second register. The FIRST_TRY parameter is used to only allow the parameters to be reversed once. */ static bool find_inc (bool first_try) { rtx insn; basic_block bb = BLOCK_FOR_INSN (mem_insn.insn); rtx other_insn; df_ref *def_rec; /* Make sure this reg appears only once in this insn. */ if (count_occurrences (PATTERN (mem_insn.insn), mem_insn.reg0, 1) != 1) { if (dump_file) fprintf (dump_file, "mem count failure\n"); return false; } if (dump_file) dump_mem_insn (dump_file); /* Find the next use that is an inc. */ insn = get_next_ref (REGNO (mem_insn.reg0), BLOCK_FOR_INSN (mem_insn.insn), reg_next_inc_use); if (!insn) return false; /* Even though we know the next use is an add or inc because it came from the reg_next_inc_use, we must still reparse. */ if (!parse_add_or_inc (insn, false)) { /* Next use was not an add. Look for one extra case. It could be that we have: *(a + b) ...= a; ...= b + a if we reverse the operands in the mem ref we would find this. Only try it once though. */ if (first_try && !mem_insn.reg1_is_const) { reverse_mem (); return find_inc (false); } else return false; } /* Need to assure that none of the operands of the inc instruction are assigned to by the mem insn. */ for (def_rec = DF_INSN_DEFS (mem_insn.insn); *def_rec; def_rec++) { df_ref def = *def_rec; unsigned int regno = DF_REF_REGNO (def); if ((regno == REGNO (inc_insn.reg0)) || (regno == REGNO (inc_insn.reg_res))) { if (dump_file) fprintf (dump_file, "inc conflicts with store failure.\n"); return false; } if (!inc_insn.reg1_is_const && (regno == REGNO (inc_insn.reg1))) { if (dump_file) fprintf (dump_file, "inc conflicts with store failure.\n"); return false; } } if (dump_file) dump_inc_insn (dump_file); if (inc_insn.form == FORM_POST_ADD) { /* Make sure that there is no insn that assigns to inc_insn.res between the mem_insn and the inc_insn. */ rtx other_insn = get_next_ref (REGNO (inc_insn.reg_res), BLOCK_FOR_INSN (mem_insn.insn), reg_next_def); if (other_insn != inc_insn.insn) { if (dump_file) fprintf (dump_file, "result of add is assigned to between mem and inc insns.\n"); return false; } other_insn = get_next_ref (REGNO (inc_insn.reg_res), BLOCK_FOR_INSN (mem_insn.insn), reg_next_use); if (other_insn && (other_insn != inc_insn.insn) && (DF_INSN_LUID (inc_insn.insn) > DF_INSN_LUID (other_insn))) { if (dump_file) fprintf (dump_file, "result of add is used between mem and inc insns.\n"); return false; } /* For the post_add to work, the result_reg of the inc must not be used in the mem insn since this will become the new index register. */ if (reg_overlap_mentioned_p (inc_insn.reg_res, PATTERN (mem_insn.insn))) { if (dump_file) fprintf (dump_file, "base reg replacement failure.\n"); return false; } } if (mem_insn.reg1_is_const) { if (mem_insn.reg1_val == 0) { if (!inc_insn.reg1_is_const) { /* The mem looks like *r0 and the rhs of the add has two registers. */ int luid = DF_INSN_LUID (inc_insn.insn); if (inc_insn.form == FORM_POST_ADD) { /* The trick is that we are not going to increment r0, we are going to increment the result of the add insn. For this trick to be correct, the result reg of the inc must be a valid addressing reg. */ addr_space_t as = MEM_ADDR_SPACE (*mem_insn.mem_loc); if (GET_MODE (inc_insn.reg_res) != targetm.addr_space.address_mode (as)) { if (dump_file) fprintf (dump_file, "base reg mode failure.\n"); return false; } /* We also need to make sure that the next use of inc result is after the inc. */ other_insn = get_next_ref (REGNO (inc_insn.reg1), bb, reg_next_use); if (other_insn && luid > DF_INSN_LUID (other_insn)) return false; if (!rtx_equal_p (mem_insn.reg0, inc_insn.reg0)) reverse_inc (); } other_insn = get_next_ref (REGNO (inc_insn.reg1), bb, reg_next_def); if (other_insn && luid > DF_INSN_LUID (other_insn)) return false; } } /* Both the inc/add and the mem have a constant. Need to check that the constants are ok. */ else if ((mem_insn.reg1_val != inc_insn.reg1_val) && (mem_insn.reg1_val != -inc_insn.reg1_val)) return false; } else { /* The mem insn is of the form *(a + b) where a and b are both regs. It may be that in order to match the add or inc we need to treat it as if it was *(b + a). It may also be that the add is of the form a + c where c does not match b and then we just abandon this. */ int luid = DF_INSN_LUID (inc_insn.insn); rtx other_insn; /* Make sure this reg appears only once in this insn. */ if (count_occurrences (PATTERN (mem_insn.insn), mem_insn.reg1, 1) != 1) return false; if (inc_insn.form == FORM_POST_ADD) { /* For this trick to be correct, the result reg of the inc must be a valid addressing reg. */ addr_space_t as = MEM_ADDR_SPACE (*mem_insn.mem_loc); if (GET_MODE (inc_insn.reg_res) != targetm.addr_space.address_mode (as)) { if (dump_file) fprintf (dump_file, "base reg mode failure.\n"); return false; } if (rtx_equal_p (mem_insn.reg0, inc_insn.reg0)) { if (!rtx_equal_p (mem_insn.reg1, inc_insn.reg1)) { /* See comment above on find_inc (false) call. */ if (first_try) { reverse_mem (); return find_inc (false); } else return false; } /* Need to check that there are no assignments to b before the add insn. */ other_insn = get_next_ref (REGNO (inc_insn.reg1), bb, reg_next_def); if (other_insn && luid > DF_INSN_LUID (other_insn)) return false; /* All ok for the next step. */ } else { /* We know that mem_insn.reg0 must equal inc_insn.reg1 or else we would not have found the inc insn. */ reverse_mem (); if (!rtx_equal_p (mem_insn.reg0, inc_insn.reg0)) { /* See comment above on find_inc (false) call. */ if (first_try) return find_inc (false); else return false; } /* To have gotten here know that. *(b + a) ... = (b + a) We also know that the lhs of the inc is not b or a. We need to make sure that there are no assignments to b between the mem ref and the inc. */ other_insn = get_next_ref (REGNO (inc_insn.reg0), bb, reg_next_def); if (other_insn && luid > DF_INSN_LUID (other_insn)) return false; } /* Need to check that the next use of the add result is later than add insn since this will be the reg incremented. */ other_insn = get_next_ref (REGNO (inc_insn.reg_res), bb, reg_next_use); if (other_insn && luid > DF_INSN_LUID (other_insn)) return false; } else /* FORM_POST_INC. There is less to check here because we know that operands must line up. */ { if (!rtx_equal_p (mem_insn.reg1, inc_insn.reg1)) /* See comment above on find_inc (false) call. */ { if (first_try) { reverse_mem (); return find_inc (false); } else return false; } /* To have gotten here know that. *(a + b) ... = (a + b) We also know that the lhs of the inc is not b. We need to make sure that there are no assignments to b between the mem ref and the inc. */ other_insn = get_next_ref (REGNO (inc_insn.reg1), bb, reg_next_def); if (other_insn && luid > DF_INSN_LUID (other_insn)) return false; } } if (inc_insn.form == FORM_POST_INC) { other_insn = get_next_ref (REGNO (inc_insn.reg0), bb, reg_next_use); /* When we found inc_insn, we were looking for the next add or inc, not the next insn that used the reg. Because we are going to increment the reg in this form, we need to make sure that there were no intervening uses of reg. */ if (inc_insn.insn != other_insn) return false; } return try_merge (); } /* A recursive function that walks ADDRESS_OF_X to find all of the mem uses in pat that could be used as an auto inc or dec. It then calls FIND_INC for each one. */ static bool find_mem (rtx *address_of_x) { rtx x = *address_of_x; enum rtx_code code = GET_CODE (x); const char *const fmt = GET_RTX_FORMAT (code); int i; if (code == MEM && REG_P (XEXP (x, 0))) { /* Match with *reg0. */ mem_insn.mem_loc = address_of_x; mem_insn.reg0 = XEXP (x, 0); mem_insn.reg1_is_const = true; mem_insn.reg1_val = 0; mem_insn.reg1 = GEN_INT (0); if (find_inc (true)) return true; } if (code == MEM && GET_CODE (XEXP (x, 0)) == PLUS && REG_P (XEXP (XEXP (x, 0), 0))) { rtx reg1 = XEXP (XEXP (x, 0), 1); mem_insn.mem_loc = address_of_x; mem_insn.reg0 = XEXP (XEXP (x, 0), 0); mem_insn.reg1 = reg1; if (CONST_INT_P (reg1)) { mem_insn.reg1_is_const = true; /* Match with *(reg0 + c) where c is a const. */ mem_insn.reg1_val = INTVAL (reg1); if (find_inc (true)) return true; } else if (REG_P (reg1)) { /* Match with *(reg0 + reg1). */ mem_insn.reg1_is_const = false; if (find_inc (true)) return true; } } if (code == SIGN_EXTRACT || code == ZERO_EXTRACT) { /* If REG occurs inside a MEM used in a bit-field reference, that is unacceptable. */ return false; } /* Time for some deep diving. */ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') { if (find_mem (&XEXP (x, i))) return true; } else if (fmt[i] == 'E') { int j; for (j = XVECLEN (x, i) - 1; j >= 0; j--) if (find_mem (&XVECEXP (x, i, j))) return true; } } return false; } /* Try to combine all incs and decs by constant values with memory references in BB. */ static void merge_in_block (int max_reg, basic_block bb) { rtx insn; rtx curr; int success_in_block = 0; if (dump_file) fprintf (dump_file, "\n\nstarting bb %d\n", bb->index); FOR_BB_INSNS_REVERSE_SAFE (bb, insn, curr) { unsigned int uid = INSN_UID (insn); bool insn_is_add_or_inc = true; if (!NONDEBUG_INSN_P (insn)) continue; /* This continue is deliberate. We do not want the uses of the jump put into reg_next_use because it is not considered safe to combine a preincrement with a jump. */ if (JUMP_P (insn)) continue; if (dump_file) dump_insn_slim (dump_file, insn); /* Does this instruction increment or decrement a register? */ if (parse_add_or_inc (insn, true)) { int regno = REGNO (inc_insn.reg_res); /* Cannot handle case where there are three separate regs before a mem ref. Too many moves would be needed to be profitable. */ if ((inc_insn.form == FORM_PRE_INC) || inc_insn.reg1_is_const) { mem_insn.insn = get_next_ref (regno, bb, reg_next_use); if (mem_insn.insn) { bool ok = true; if (!inc_insn.reg1_is_const) { /* We are only here if we are going to try a HAVE_*_MODIFY_REG type transformation. c is a reg and we must sure that the path from the inc_insn to the mem_insn.insn is both def and use clear of c because the inc insn is going to move into the mem_insn.insn. */ int luid = DF_INSN_LUID (mem_insn.insn); rtx other_insn = get_next_ref (REGNO (inc_insn.reg1), bb, reg_next_use); if (other_insn && luid > DF_INSN_LUID (other_insn)) ok = false; other_insn = get_next_ref (REGNO (inc_insn.reg1), bb, reg_next_def); if (other_insn && luid > DF_INSN_LUID (other_insn)) ok = false; } if (dump_file) dump_inc_insn (dump_file); if (ok && find_address (&PATTERN (mem_insn.insn)) == -1) { if (dump_file) dump_mem_insn (dump_file); if (try_merge ()) { success_in_block++; insn_is_add_or_inc = false; } } } } } else { insn_is_add_or_inc = false; mem_insn.insn = insn; if (find_mem (&PATTERN (insn))) success_in_block++; } /* If the inc insn was merged with a mem, the inc insn is gone and there is noting to update. */ if (DF_INSN_UID_GET (uid)) { df_ref *def_rec; df_ref *use_rec; /* Need to update next use. */ for (def_rec = DF_INSN_UID_DEFS (uid); *def_rec; def_rec++) { df_ref def = *def_rec; reg_next_use[DF_REF_REGNO (def)] = NULL; reg_next_inc_use[DF_REF_REGNO (def)] = NULL; reg_next_def[DF_REF_REGNO (def)] = insn; } for (use_rec = DF_INSN_UID_USES (uid); *use_rec; use_rec++) { df_ref use = *use_rec; reg_next_use[DF_REF_REGNO (use)] = insn; if (insn_is_add_or_inc) reg_next_inc_use[DF_REF_REGNO (use)] = insn; else reg_next_inc_use[DF_REF_REGNO (use)] = NULL; } } else if (dump_file) fprintf (dump_file, "skipping update of deleted insn %d\n", uid); } /* If we were successful, try again. There may have been several opportunities that were interleaved. This is rare but gcc.c-torture/compile/pr17273.c actually exhibits this. */ if (success_in_block) { /* In this case, we must clear these vectors since the trick of testing if the stale insn in the block will not work. */ memset (reg_next_use, 0, max_reg * sizeof(rtx)); memset (reg_next_inc_use, 0, max_reg * sizeof(rtx)); memset (reg_next_def, 0, max_reg * sizeof(rtx)); df_recompute_luids (bb); merge_in_block (max_reg, bb); } } #endif static unsigned int rest_of_handle_auto_inc_dec (void) { #ifdef AUTO_INC_DEC basic_block bb; int max_reg = max_reg_num (); if (!initialized) init_decision_table (); mem_tmp = gen_rtx_MEM (Pmode, NULL_RTX); df_note_add_problem (); df_analyze (); reg_next_use = XCNEWVEC (rtx, max_reg); reg_next_inc_use = XCNEWVEC (rtx, max_reg); reg_next_def = XCNEWVEC (rtx, max_reg); FOR_EACH_BB (bb) merge_in_block (max_reg, bb); free (reg_next_use); free (reg_next_inc_use); free (reg_next_def); mem_tmp = NULL; #endif return 0; } /* Discover auto-inc auto-dec instructions. */ static bool gate_auto_inc_dec (void) { #ifdef AUTO_INC_DEC return (optimize > 0 && flag_auto_inc_dec); #else return false; #endif } struct rtl_opt_pass pass_inc_dec = { { RTL_PASS, "auto_inc_dec", /* name */ gate_auto_inc_dec, /* gate */ rest_of_handle_auto_inc_dec, /* execute */ NULL, /* sub */ NULL, /* next */ 0, /* static_pass_number */ TV_AUTO_INC_DEC, /* tv_id */ 0, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ TODO_df_finish, /* todo_flags_finish */ } };
Go to most recent revision | Compare with Previous | Blame | View Log