URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [avr/] [avr.h] - Rev 758
Go to most recent revision | Compare with Previous | Blame | View Log
/* Definitions of target machine for GNU compiler, for ATMEL AVR at90s8515, ATmega103/103L, ATmega603/603L microcontrollers. Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. Contributed by Denis Chertykov (chertykov@gmail.com) This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ /* Names to predefine in the preprocessor for this target machine. */ struct base_arch_s { /* Assembler only. */ int asm_only; /* Core have 'MUL*' instructions. */ int have_mul; /* Core have 'CALL' and 'JMP' instructions. */ int have_jmp_call; /* Core have 'MOVW' and 'LPM Rx,Z' instructions. */ int have_movw_lpmx; /* Core have 'ELPM' instructions. */ int have_elpm; /* Core have 'ELPM Rx,Z' instructions. */ int have_elpmx; /* Core have 'EICALL' and 'EIJMP' instructions. */ int have_eijmp_eicall; /* This is an XMEGA core. */ int xmega_p; /* This core has the RAMPD special function register and thus also the RAMPX, RAMPY and RAMPZ registers. */ int have_rampd; /* Default start of data section address for architecture. */ int default_data_section_start; /* Offset between SFR address and RAM address: SFR-address = RAM-address - sfr_offset */ int sfr_offset; /* Architecture id to built-in define __AVR_ARCH__ (NULL -> no macro) */ const char *const macro; /* Architecture name. */ const char *const arch_name; }; /* These names are used as the index into the avr_arch_types[] table above. */ enum avr_arch { ARCH_UNKNOWN, ARCH_AVR1, ARCH_AVR2, ARCH_AVR25, ARCH_AVR3, ARCH_AVR31, ARCH_AVR35, ARCH_AVR4, ARCH_AVR5, ARCH_AVR51, ARCH_AVR6, ARCH_AVRXMEGA2, ARCH_AVRXMEGA4, ARCH_AVRXMEGA5, ARCH_AVRXMEGA6, ARCH_AVRXMEGA7 }; struct mcu_type_s { /* Device name. */ const char *const name; /* Index in avr_arch_types[]. */ int arch; /* Must lie outside user's namespace. NULL == no macro. */ const char *const macro; /* Stack pointer have 8 bits width. */ int short_sp; /* Some AVR devices have a core erratum when skipping a 2-word instruction. Skip instructions are: SBRC, SBRS, SBIC, SBIS, CPSE. Problems will occur with return address is IRQ executes during the skip sequence. A support ticket from Atmel returned the following information: Subject: (ATTicket:644469) On AVR skip-bug core Erratum From: avr@atmel.com Date: 2011-07-27 (Please keep the subject when replying to this mail) This errata exists only in AT90S8515 and ATmega103 devices. For information please refer the following respective errata links http://www.atmel.com/dyn/resources/prod_documents/doc2494.pdf http://www.atmel.com/dyn/resources/prod_documents/doc1436.pdf */ /* Core Erratum: Must not skip 2-word instruction. */ int errata_skip; /* Start of data section. */ int data_section_start; /* Number of 64k segments in the flash. */ int n_flash; /* Name of device library. */ const char *const library_name; }; /* Preprocessor macros to define depending on MCU type. */ extern const char *avr_extra_arch_macro; extern const struct base_arch_s *avr_current_arch; extern const struct mcu_type_s *avr_current_device; extern const struct mcu_type_s avr_mcu_types[]; extern const struct base_arch_s avr_arch_types[]; typedef struct { /* Id of the address space as used in c_register_addr_space */ unsigned char id; /* Flavour of memory: 0 = RAM, 1 = Flash */ int memory_class; /* Width of pointer (in bytes) */ int pointer_size; /* Name of the address space as visible to the user */ const char *name; /* Segment (i.e. 64k memory chunk) number. */ int segment; } avr_addrspace_t; extern const avr_addrspace_t avr_addrspace[]; /* Known address spaces */ enum { ADDR_SPACE_RAM, ADDR_SPACE_FLASH, ADDR_SPACE_FLASH1, ADDR_SPACE_FLASH2, ADDR_SPACE_FLASH3, ADDR_SPACE_FLASH4, ADDR_SPACE_FLASH5, ADDR_SPACE_MEMX }; #define TARGET_CPU_CPP_BUILTINS() avr_cpu_cpp_builtins (pfile) #define AVR_HAVE_JMP_CALL (avr_current_arch->have_jmp_call && !TARGET_SHORT_CALLS) #define AVR_HAVE_MUL (avr_current_arch->have_mul) #define AVR_HAVE_MOVW (avr_current_arch->have_movw_lpmx) #define AVR_HAVE_LPMX (avr_current_arch->have_movw_lpmx) #define AVR_HAVE_ELPM (avr_current_arch->have_elpm) #define AVR_HAVE_ELPMX (avr_current_arch->have_elpmx) #define AVR_HAVE_RAMPD (avr_current_arch->have_rampd) #define AVR_HAVE_RAMPX (avr_current_arch->have_rampd) #define AVR_HAVE_RAMPY (avr_current_arch->have_rampd) #define AVR_HAVE_RAMPZ (avr_current_arch->have_elpm \ || avr_current_arch->have_rampd) #define AVR_HAVE_EIJMP_EICALL (avr_current_arch->have_eijmp_eicall) #define AVR_HAVE_8BIT_SP (avr_current_device->short_sp || TARGET_TINY_STACK) #define AVR_2_BYTE_PC (!AVR_HAVE_EIJMP_EICALL) #define AVR_3_BYTE_PC (AVR_HAVE_EIJMP_EICALL) #define AVR_XMEGA (avr_current_arch->xmega_p) #define BITS_BIG_ENDIAN 0 #define BYTES_BIG_ENDIAN 0 #define WORDS_BIG_ENDIAN 0 #ifdef IN_LIBGCC2 /* This is to get correct SI and DI modes in libgcc2.c (32 and 64 bits). */ #define UNITS_PER_WORD 4 #else /* Width of a word, in units (bytes). */ #define UNITS_PER_WORD 1 #endif #define POINTER_SIZE 16 /* Maximum sized of reasonable data type DImode or Dfmode ... */ #define MAX_FIXED_MODE_SIZE 32 #define PARM_BOUNDARY 8 #define FUNCTION_BOUNDARY 8 #define EMPTY_FIELD_BOUNDARY 8 /* No data type wants to be aligned rounder than this. */ #define BIGGEST_ALIGNMENT 8 #define TARGET_VTABLE_ENTRY_ALIGN 8 #define STRICT_ALIGNMENT 0 #define INT_TYPE_SIZE (TARGET_INT8 ? 8 : 16) #define SHORT_TYPE_SIZE (INT_TYPE_SIZE == 8 ? INT_TYPE_SIZE : 16) #define LONG_TYPE_SIZE (INT_TYPE_SIZE == 8 ? 16 : 32) #define LONG_LONG_TYPE_SIZE (INT_TYPE_SIZE == 8 ? 32 : 64) #define FLOAT_TYPE_SIZE 32 #define DOUBLE_TYPE_SIZE 32 #define LONG_DOUBLE_TYPE_SIZE 32 #define DEFAULT_SIGNED_CHAR 1 #define SIZE_TYPE (INT_TYPE_SIZE == 8 ? "long unsigned int" : "unsigned int") #define PTRDIFF_TYPE (INT_TYPE_SIZE == 8 ? "long int" :"int") #define WCHAR_TYPE_SIZE 16 #define FIRST_PSEUDO_REGISTER 36 #define FIXED_REGISTERS {\ 1,1,/* r0 r1 */\ 0,0,/* r2 r3 */\ 0,0,/* r4 r5 */\ 0,0,/* r6 r7 */\ 0,0,/* r8 r9 */\ 0,0,/* r10 r11 */\ 0,0,/* r12 r13 */\ 0,0,/* r14 r15 */\ 0,0,/* r16 r17 */\ 0,0,/* r18 r19 */\ 0,0,/* r20 r21 */\ 0,0,/* r22 r23 */\ 0,0,/* r24 r25 */\ 0,0,/* r26 r27 */\ 0,0,/* r28 r29 */\ 0,0,/* r30 r31 */\ 1,1,/* STACK */\ 1,1 /* arg pointer */ } #define CALL_USED_REGISTERS { \ 1,1,/* r0 r1 */ \ 0,0,/* r2 r3 */ \ 0,0,/* r4 r5 */ \ 0,0,/* r6 r7 */ \ 0,0,/* r8 r9 */ \ 0,0,/* r10 r11 */ \ 0,0,/* r12 r13 */ \ 0,0,/* r14 r15 */ \ 0,0,/* r16 r17 */ \ 1,1,/* r18 r19 */ \ 1,1,/* r20 r21 */ \ 1,1,/* r22 r23 */ \ 1,1,/* r24 r25 */ \ 1,1,/* r26 r27 */ \ 0,0,/* r28 r29 */ \ 1,1,/* r30 r31 */ \ 1,1,/* STACK */ \ 1,1 /* arg pointer */ } #define REG_ALLOC_ORDER { \ 24,25, \ 18,19, \ 20,21, \ 22,23, \ 30,31, \ 26,27, \ 28,29, \ 17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2, \ 0,1, \ 32,33,34,35 \ } #define ADJUST_REG_ALLOC_ORDER order_regs_for_local_alloc () #define HARD_REGNO_NREGS(REGNO, MODE) ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) #define HARD_REGNO_MODE_OK(REGNO, MODE) avr_hard_regno_mode_ok(REGNO, MODE) #define MODES_TIEABLE_P(MODE1, MODE2) 1 enum reg_class { NO_REGS, R0_REG, /* r0 */ POINTER_X_REGS, /* r26 - r27 */ POINTER_Y_REGS, /* r28 - r29 */ POINTER_Z_REGS, /* r30 - r31 */ STACK_REG, /* STACK */ BASE_POINTER_REGS, /* r28 - r31 */ POINTER_REGS, /* r26 - r31 */ ADDW_REGS, /* r24 - r31 */ SIMPLE_LD_REGS, /* r16 - r23 */ LD_REGS, /* r16 - r31 */ NO_LD_REGS, /* r0 - r15 */ GENERAL_REGS, /* r0 - r31 */ ALL_REGS, LIM_REG_CLASSES }; #define N_REG_CLASSES (int)LIM_REG_CLASSES #define REG_CLASS_NAMES { \ "NO_REGS", \ "R0_REG", /* r0 */ \ "POINTER_X_REGS", /* r26 - r27 */ \ "POINTER_Y_REGS", /* r28 - r29 */ \ "POINTER_Z_REGS", /* r30 - r31 */ \ "STACK_REG", /* STACK */ \ "BASE_POINTER_REGS", /* r28 - r31 */ \ "POINTER_REGS", /* r26 - r31 */ \ "ADDW_REGS", /* r24 - r31 */ \ "SIMPLE_LD_REGS", /* r16 - r23 */ \ "LD_REGS", /* r16 - r31 */ \ "NO_LD_REGS", /* r0 - r15 */ \ "GENERAL_REGS", /* r0 - r31 */ \ "ALL_REGS" } #define REG_CLASS_CONTENTS { \ {0x00000000,0x00000000}, /* NO_REGS */ \ {0x00000001,0x00000000}, /* R0_REG */ \ {3 << REG_X,0x00000000}, /* POINTER_X_REGS, r26 - r27 */ \ {3 << REG_Y,0x00000000}, /* POINTER_Y_REGS, r28 - r29 */ \ {3 << REG_Z,0x00000000}, /* POINTER_Z_REGS, r30 - r31 */ \ {0x00000000,0x00000003}, /* STACK_REG, STACK */ \ {(3 << REG_Y) | (3 << REG_Z), \ 0x00000000}, /* BASE_POINTER_REGS, r28 - r31 */ \ {(3 << REG_X) | (3 << REG_Y) | (3 << REG_Z), \ 0x00000000}, /* POINTER_REGS, r26 - r31 */ \ {(3 << REG_X) | (3 << REG_Y) | (3 << REG_Z) | (3 << REG_W), \ 0x00000000}, /* ADDW_REGS, r24 - r31 */ \ {0x00ff0000,0x00000000}, /* SIMPLE_LD_REGS r16 - r23 */ \ {(3 << REG_X)|(3 << REG_Y)|(3 << REG_Z)|(3 << REG_W)|(0xff << 16), \ 0x00000000}, /* LD_REGS, r16 - r31 */ \ {0x0000ffff,0x00000000}, /* NO_LD_REGS r0 - r15 */ \ {0xffffffff,0x00000000}, /* GENERAL_REGS, r0 - r31 */ \ {0xffffffff,0x00000003} /* ALL_REGS */ \ } #define REGNO_REG_CLASS(R) avr_regno_reg_class(R) #define MODE_CODE_BASE_REG_CLASS(mode, as, outer_code, index_code) \ avr_mode_code_base_reg_class (mode, as, outer_code, index_code) #define INDEX_REG_CLASS NO_REGS #define REGNO_MODE_CODE_OK_FOR_BASE_P(num, mode, as, outer_code, index_code) \ avr_regno_mode_code_ok_for_base_p (num, mode, as, outer_code, index_code) #define REGNO_OK_FOR_INDEX_P(NUM) 0 #define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true #define STACK_PUSH_CODE POST_DEC #define STACK_GROWS_DOWNWARD #define STARTING_FRAME_OFFSET avr_starting_frame_offset() #define STACK_POINTER_OFFSET 1 #define FIRST_PARM_OFFSET(FUNDECL) 0 #define STACK_BOUNDARY 8 #define STACK_POINTER_REGNUM 32 #define FRAME_POINTER_REGNUM REG_Y #define ARG_POINTER_REGNUM 34 #define STATIC_CHAIN_REGNUM 2 #define ELIMINABLE_REGS { \ {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM} \ ,{FRAME_POINTER_REGNUM+1,STACK_POINTER_REGNUM+1}} #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ OFFSET = avr_initial_elimination_offset (FROM, TO) #define RETURN_ADDR_RTX(count, tem) avr_return_addr_rtx (count, tem) /* Don't use Push rounding. expr.c: emit_single_push_insn is broken for POST_DEC targets (PR27386). */ /*#define PUSH_ROUNDING(NPUSHED) (NPUSHED)*/ typedef struct avr_args { int nregs; /* # registers available for passing */ int regno; /* next available register number */ } CUMULATIVE_ARGS; #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \ init_cumulative_args (&(CUM), FNTYPE, LIBNAME, FNDECL) #define FUNCTION_ARG_REGNO_P(r) function_arg_regno_p(r) #define DEFAULT_PCC_STRUCT_RETURN 0 #define EPILOGUE_USES(REGNO) avr_epilogue_uses(REGNO) #define HAVE_POST_INCREMENT 1 #define HAVE_PRE_DECREMENT 1 #define MAX_REGS_PER_ADDRESS 1 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_L,WIN) \ do { \ rtx new_x = avr_legitimize_reload_address (&(X), MODE, OPNUM, TYPE, \ ADDR_TYPE (TYPE), \ IND_L, make_memloc); \ if (new_x) \ { \ X = new_x; \ goto WIN; \ } \ } while (0) #define BRANCH_COST(speed_p, predictable_p) avr_branch_cost #define SLOW_BYTE_ACCESS 0 #define NO_FUNCTION_CSE #define REGISTER_TARGET_PRAGMAS() \ do { \ avr_register_target_pragmas(); \ } while (0) #define TEXT_SECTION_ASM_OP "\t.text" #define DATA_SECTION_ASM_OP "\t.data" #define BSS_SECTION_ASM_OP "\t.section .bss" /* Define the pseudo-ops used to switch to the .ctors and .dtors sections. There are no shared libraries on this target, and these sections are placed in the read-only program memory, so they are not writable. */ #undef CTORS_SECTION_ASM_OP #define CTORS_SECTION_ASM_OP "\t.section .ctors,\"a\",@progbits" #undef DTORS_SECTION_ASM_OP #define DTORS_SECTION_ASM_OP "\t.section .dtors,\"a\",@progbits" #define TARGET_ASM_CONSTRUCTOR avr_asm_out_ctor #define TARGET_ASM_DESTRUCTOR avr_asm_out_dtor #define SUPPORTS_INIT_PRIORITY 0 #define JUMP_TABLES_IN_TEXT_SECTION 0 #define ASM_COMMENT_START " ; " #define ASM_APP_ON "/* #APP */\n" #define ASM_APP_OFF "/* #NOAPP */\n" #define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) ((C) == '\n' || ((C) == '$')) #define ASM_OUTPUT_ALIGNED_DECL_COMMON(STREAM, DECL, NAME, SIZE, ALIGN) \ avr_asm_output_aligned_decl_common (STREAM, DECL, NAME, SIZE, ALIGN, false) #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ asm_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN) #define ASM_OUTPUT_ALIGNED_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGN) \ avr_asm_output_aligned_decl_common (STREAM, DECL, NAME, SIZE, ALIGN, true) /* Globalizing directive for a label. */ #define GLOBAL_ASM_OP ".global\t" #define SUPPORTS_WEAK 1 #define HAS_INIT_SECTION 1 #define REGISTER_NAMES { \ "r0","r1","r2","r3","r4","r5","r6","r7", \ "r8","r9","r10","r11","r12","r13","r14","r15", \ "r16","r17","r18","r19","r20","r21","r22","r23", \ "r24","r25","r26","r27","r28","r29","r30","r31", \ "__SP_L__","__SP_H__","argL","argH"} #define FINAL_PRESCAN_INSN(insn, operand, nop) final_prescan_insn (insn, operand,nop) #define ASM_OUTPUT_REG_PUSH(STREAM, REGNO) \ { \ gcc_assert (REGNO < 32); \ fprintf (STREAM, "\tpush\tr%d", REGNO); \ } #define ASM_OUTPUT_REG_POP(STREAM, REGNO) \ { \ gcc_assert (REGNO < 32); \ fprintf (STREAM, "\tpop\tr%d", REGNO); \ } #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \ avr_output_addr_vec_elt(STREAM, VALUE) #define ASM_OUTPUT_ALIGN(STREAM, POWER) \ do { \ if ((POWER) > 1) \ fprintf (STREAM, "\t.p2align\t%d\n", POWER); \ } while (0) #define CASE_VECTOR_MODE HImode #undef WORD_REGISTER_OPERATIONS #define MOVE_MAX 4 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 #define Pmode HImode #define FUNCTION_MODE HImode #define DOLLARS_IN_IDENTIFIERS 0 #define TRAMPOLINE_SIZE 4 /* Store in cc_status the expressions that the condition codes will describe after execution of an instruction whose pattern is EXP. Do not alter them if the instruction would not alter the cc's. */ #define NOTICE_UPDATE_CC(EXP, INSN) notice_update_cc(EXP, INSN) /* The add insns don't set overflow in a usable way. */ #define CC_OVERFLOW_UNUSABLE 01000 /* The mov,and,or,xor insns don't set carry. That's ok though as the Z bit is all we need when doing unsigned comparisons on the result of these insns (since they're always with 0). However, conditions.h has CC_NO_OVERFLOW defined for this purpose. Rename it to something more understandable. */ #define CC_NO_CARRY CC_NO_OVERFLOW /* Output assembler code to FILE to increment profiler label # LABELNO for profiling a function entry. */ #define FUNCTION_PROFILER(FILE, LABELNO) \ fprintf (FILE, "/* profiler %d */", (LABELNO)) #define ADJUST_INSN_LENGTH(INSN, LENGTH) (LENGTH =\ adjust_insn_length (INSN, LENGTH)) extern const char *avr_device_to_arch (int argc, const char **argv); extern const char *avr_device_to_data_start (int argc, const char **argv); extern const char *avr_device_to_startfiles (int argc, const char **argv); extern const char *avr_device_to_devicelib (int argc, const char **argv); #define EXTRA_SPEC_FUNCTIONS \ { "device_to_arch", avr_device_to_arch }, \ { "device_to_data_start", avr_device_to_data_start }, \ { "device_to_startfile", avr_device_to_startfiles }, \ { "device_to_devicelib", avr_device_to_devicelib }, #define CPP_SPEC "" #define CC1_SPEC "" #define CC1PLUS_SPEC "%{!frtti:-fno-rtti} \ %{!fenforce-eh-specs:-fno-enforce-eh-specs} \ %{!fexceptions:-fno-exceptions}" /* A C string constant that tells the GCC driver program options to pass to `cc1plus'. */ #define ASM_SPEC "%{mmcu=avr25:-mmcu=avr2;mmcu=avr35:-mmcu=avr3;mmcu=avr31:-mmcu=avr3;mmcu=avr51:-mmcu=avr5;\ mmcu=*:-mmcu=%*} \ %{mmcu=*:%{!mmcu=avr2:%{!mmcu=at90s8515:%{!mmcu=avr31:%{!mmcu=atmega103:\ -mno-skip-bug}}}}}" #define LINK_SPEC "\ %{mrelax:--relax\ %{mpmem-wrap-around:%{mmcu=at90usb8*:--pmem-wrap-around=8k}\ %{mmcu=atmega16*:--pmem-wrap-around=16k}\ %{mmcu=atmega32*|\ mmcu=at90can32*:--pmem-wrap-around=32k}\ %{mmcu=atmega64*|\ mmcu=at90can64*|\ mmcu=at90usb64*:--pmem-wrap-around=64k}}}\ %:device_to_arch(%{mmcu=*:%*})\ %:device_to_data_start(%{mmcu=*:%*})" #define LIB_SPEC \ "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lc }}}}}" #define LIBSTDCXX "gcc" /* No libstdc++ for now. Empty string doesn't work. */ #define LIBGCC_SPEC \ "%{!mmcu=at90s1*:%{!mmcu=attiny11:%{!mmcu=attiny12:%{!mmcu=attiny15:%{!mmcu=attiny28: -lgcc }}}}}" #define STARTFILE_SPEC "%:device_to_startfile(%{mmcu=*:%*})" #define ENDFILE_SPEC "" /* This is the default without any -mmcu=* option (AT90S*). */ #define MULTILIB_DEFAULTS { "mmcu=avr2" } #define TEST_HARD_REG_CLASS(CLASS, REGNO) \ TEST_HARD_REG_BIT (reg_class_contents[ (int) (CLASS)], REGNO) #define CR_TAB "\n\t" #define DWARF2_ADDR_SIZE 4 #define INCOMING_RETURN_ADDR_RTX avr_incoming_return_addr_rtx () #define INCOMING_FRAME_SP_OFFSET (AVR_3_BYTE_PC ? 3 : 2) /* The caller's stack pointer value immediately before the call is one byte below the first argument. */ #define ARG_POINTER_CFA_OFFSET(FNDECL) -1 #define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG) \ avr_hard_regno_rename_ok (OLD_REG, NEW_REG) /* A C structure for machine-specific, per-function data. This is added to the cfun structure. */ struct GTY(()) machine_function { /* 'true' - if current function is a naked function. */ int is_naked; /* 'true' - if current function is an interrupt function as specified by the "interrupt" attribute. */ int is_interrupt; /* 'true' - if current function is a signal function as specified by the "signal" attribute. */ int is_signal; /* 'true' - if current function is a 'task' function as specified by the "OS_task" attribute. */ int is_OS_task; /* 'true' - if current function is a 'main' function as specified by the "OS_main" attribute. */ int is_OS_main; /* Current function stack size. */ int stack_usage; /* 'true' if a callee might be tail called */ int sibcall_fails; }; /* AVR does not round pushes, but the existance of this macro is required in order for pushes to be generated. */ #define PUSH_ROUNDING(X) (X) /* Define prototype here to avoid build warning. Some files using ACCUMULATE_OUTGOING_ARGS (directly or indirectly) include tm.h but not tm_p.h. */ extern int avr_accumulate_outgoing_args (void); #define ACCUMULATE_OUTGOING_ARGS avr_accumulate_outgoing_args() #define INIT_EXPANDERS avr_init_expanders()
Go to most recent revision | Compare with Previous | Blame | View Log