URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [i386/] [constraints.md] - Rev 827
Go to most recent revision | Compare with Previous | Blame | View Log
;; Constraint definitions for IA-32 and x86-64.
;; Copyright (C) 2006, 2007 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;;; Unused letters:
;;; B H T W
;;; h k v
;; Integer register constraints.
;; It is not necessary to define 'r' here.
(define_register_constraint "R" "LEGACY_REGS"
"Legacy register---the eight integer registers available on all
i386 processors (@code{a}, @code{b}, @code{c}, @code{d},
@code{si}, @code{di}, @code{bp}, @code{sp}).")
(define_register_constraint "q" "TARGET_64BIT ? GENERAL_REGS : Q_REGS"
"Any register accessible as @code{@var{r}l}. In 32-bit mode, @code{a},
@code{b}, @code{c}, and @code{d}; in 64-bit mode, any integer register.")
(define_register_constraint "Q" "Q_REGS"
"Any register accessible as @code{@var{r}h}: @code{a}, @code{b},
@code{c}, and @code{d}.")
(define_register_constraint "l" "INDEX_REGS"
"@internal Any register that can be used as the index in a base+index
memory access: that is, any general register except the stack pointer.")
(define_register_constraint "a" "AREG"
"The @code{a} register.")
(define_register_constraint "b" "BREG"
"The @code{b} register.")
(define_register_constraint "c" "CREG"
"The @code{c} register.")
(define_register_constraint "d" "DREG"
"The @code{d} register.")
(define_register_constraint "S" "SIREG"
"The @code{si} register.")
(define_register_constraint "D" "DIREG"
"The @code{di} register.")
(define_register_constraint "A" "AD_REGS"
"The @code{a} and @code{d} registers, as a pair (for instructions
that return half the result in one and half in the other).")
(define_register_constraint "U" "CLOBBERED_REGS"
"The call-clobbered integer registers.")
;; Floating-point register constraints.
(define_register_constraint "f"
"TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FLOAT_REGS : NO_REGS"
"Any 80387 floating-point (stack) register.")
(define_register_constraint "t"
"TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FP_TOP_REG : NO_REGS"
"Top of 80387 floating-point stack (@code{%st(0)}).")
(define_register_constraint "u"
"TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FP_SECOND_REG : NO_REGS"
"Second from top of 80387 floating-point stack (@code{%st(1)}).")
;; Vector registers (also used for plain floating point nowadays).
(define_register_constraint "y" "TARGET_MMX ? MMX_REGS : NO_REGS"
"Any MMX register.")
(define_register_constraint "x" "TARGET_SSE ? SSE_REGS : NO_REGS"
"Any SSE register.")
;; We use the Y prefix to denote any number of conditional register sets:
;; z First SSE register.
;; i SSE2 inter-unit moves enabled
;; m MMX inter-unit moves enabled
;; p Integer register when TARGET_PARTIAL_REG_STALL is disabled
;; d Integer register when integer DFmode moves are enabled
;; x Integer register when integer XFmode moves are enabled
(define_register_constraint "Yz" "TARGET_SSE ? SSE_FIRST_REG : NO_REGS"
"First SSE register (@code{%xmm0}).")
(define_register_constraint "Yi"
"TARGET_SSE2 && TARGET_INTER_UNIT_MOVES ? SSE_REGS : NO_REGS"
"@internal Any SSE register, when SSE2 and inter-unit moves are enabled.")
(define_register_constraint "Ym"
"TARGET_MMX && TARGET_INTER_UNIT_MOVES ? MMX_REGS : NO_REGS"
"@internal Any MMX register, when inter-unit moves are enabled.")
(define_register_constraint "Yp"
"TARGET_PARTIAL_REG_STALL ? NO_REGS : GENERAL_REGS"
"@internal Any integer register when TARGET_PARTIAL_REG_STALL is disabled.")
(define_register_constraint "Yd"
"(TARGET_64BIT
|| (TARGET_INTEGER_DFMODE_MOVES && optimize_function_for_speed_p (cfun)))
? GENERAL_REGS : NO_REGS"
"@internal Any integer register when integer DFmode moves are enabled.")
(define_register_constraint "Yx"
"optimize_function_for_speed_p (cfun) ? GENERAL_REGS : NO_REGS"
"@internal Any integer register when integer XFmode moves are enabled.")
(define_constraint "z"
"@internal Constant call address operand."
(match_operand 0 "constant_call_address_operand"))
(define_constraint "w"
"@internal Call memory operand."
(and (not (match_test "TARGET_X32"))
(match_operand 0 "memory_operand")))
(define_address_constraint "j"
"@internal Address operand that can be zero extended in LEA instruction."
(and (not (match_code "const_int"))
(match_operand 0 "address_operand")))
;; Integer constant constraints.
(define_constraint "I"
"Integer constant in the range 0 @dots{} 31, for 32-bit shifts."
(and (match_code "const_int")
(match_test "IN_RANGE (ival, 0, 31)")))
(define_constraint "J"
"Integer constant in the range 0 @dots{} 63, for 64-bit shifts."
(and (match_code "const_int")
(match_test "IN_RANGE (ival, 0, 63)")))
(define_constraint "K"
"Signed 8-bit integer constant."
(and (match_code "const_int")
(match_test "IN_RANGE (ival, -128, 127)")))
(define_constraint "L"
"@code{0xFF}, @code{0xFFFF} or @code{0xFFFFFFFF}
for AND as a zero-extending move."
(and (match_code "const_int")
(match_test "ival == 0xff || ival == 0xffff
|| ival == (HOST_WIDE_INT) 0xffffffff")))
(define_constraint "M"
"0, 1, 2, or 3 (shifts for the @code{lea} instruction)."
(and (match_code "const_int")
(match_test "IN_RANGE (ival, 0, 3)")))
(define_constraint "N"
"Unsigned 8-bit integer constant (for @code{in} and @code{out}
instructions)."
(and (match_code "const_int")
(match_test "IN_RANGE (ival, 0, 255)")))
(define_constraint "O"
"@internal Integer constant in the range 0 @dots{} 127, for 128-bit shifts."
(and (match_code "const_int")
(match_test "IN_RANGE (ival, 0, 127)")))
;; Floating-point constant constraints.
;; We allow constants even if TARGET_80387 isn't set, because the
;; stack register converter may need to load 0.0 into the function
;; value register (top of stack).
(define_constraint "G"
"Standard 80387 floating point constant."
(and (match_code "const_double")
(match_test "standard_80387_constant_p (op) > 0")))
;; This can theoretically be any mode's CONST0_RTX.
(define_constraint "C"
"Standard SSE floating point constant."
(match_test "standard_sse_constant_p (op)"))
;; Constant-or-symbol-reference constraints.
(define_constraint "e"
"32-bit signed integer constant, or a symbolic reference known
to fit that range (for immediate operands in sign-extending x86-64
instructions)."
(match_operand 0 "x86_64_immediate_operand"))
(define_constraint "Z"
"32-bit unsigned integer constant, or a symbolic reference known
to fit that range (for immediate operands in zero-extending x86-64
instructions)."
(match_operand 0 "x86_64_zext_immediate_operand"))
Go to most recent revision | Compare with Previous | Blame | View Log